Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Hand Tools (70)
Turning (70)
|
|
|
Hand Tools - Turning
|
ONEWAY TERMITE HOLLOWING TOOL
|
| Termite Tool
...plus other(s)
|
HOLLOW OUT END GRAIN FASTER AND EASIER WITH THE ONEWAY TERMITE HOLLOWING TOOL. GREAT FOR DEEP HOLLOWING AS WELL AS HIGH-SPEED LIGHT FINISHING CUTS. THIS QUALITY RING CUTTER TOOL ACCEPTS THREE DIFFERENT CUTTER TIP SIZES: 3/8", 1/2" AND 5/8". TOOL COMES WITH 3/8" AND 1/2" CUTTER TIPS, A DRESSING STONE AND AN ALUMINUM OXIDE GRINDING POINT AND MOUNTING BLOCK FOR SHARPENING THE CUTTERS:
TOOL HAS 15-1/2" MAPLE HANDLE WITH 7-1/2" SHAFT AND BRASS FERRULE (24" OAL). HIGH SPEED STEEL TERMITE BITS HAVE 110,000 PSI TENSILE STRENGTH. BITS SHARPENED WITH GRINDING POINT IN A HAND DRILL OR DRILL PRESS. OPTIONAL BORAZON GRINDING POINT WILL LAST UP TO 100 TIMES LONGER THAN STANDARD ALUMINUM OXIDE POINT WITHOUT LOADING. PACKAGE INCLUDES TERMITE TOOL, 3/8" CUTTER, 1/2" CUTTER, ALOX GRINDING POINT, 2" X 3/4" DRESSING STONE, GRINDING BLOCK AND INSTRUCTIONS. CANADA.
|
|
|
|
Hand Tools - Turning
|
PRO-PM SPINDLE GOUGES
|
| 3/8" Pro-pm Spindle Gouge
...plus other(s)
|
CROWN PRO-PM SPINDLE GOUGES ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY RESULTING IN LONG LASTING CUTTING EDGES. THESE TOOLS HAVE THE TRADITIONAL FINGERNAIL GRIND FOR MAKING COVES, BEADS AND MINOR ROUGHING CUTS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM LONG BOWL GOUGES
|
| 1/4" Pro-pm Long Bowl Gouge
...plus other(s)
|
SPECIFICALLY DESIGNED FOR DEEP FACEPLATE TURNING, CROWN PRO-PM LONG BOWL GOUGES ARE ENGINEERED TO STAY SHARP LONGER:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 26" OAL; 16" LONG BLACK ASH HANDLES. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN MICRO PARTING TOOL
|
| 1/16" Thin Parting Tool
|
THE CROWN MICRO PARTING TOOL HAS A THIN 1/16" CHISEL POINT TIP THAT WORKS ESPECIALLY WELL IN PARTING SMALLER PROJECTS AND WHERE A VERY SMALL CUTTING POINT IS REQUIRED FOR TEXTURING AND DETAIL WORK:
HIGH SPEED STEEL BLADE WITH FINELY FINISHED BEECH HANDLE. 9-1/2" OAL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
PRO-PM SQUARE SCRAPERS
|
| 3/4" Pro-pm Square Scraper
...plus other(s)
|
CROWN PRO-PM SQUARE END SCRAPERS ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY PRODUCING A LONG LASTING CUTTING EDGE. THESE TOOLS ARE COMMONLY USED FOR MAKING SQUARE CUTS AND FOR HIGH SPEED SMOOTHING OPERATIONS. THEY CAN ALSO BE USED AS A BLANK FOR GRINDING SPECIALTY SHAPES SUCH AS HOOK NOSED SCRAPERS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
PRO-PM ROUND NOSE SCRAPERS
|
| 3/4" Pro-pm Round Nose Scraper
...plus other(s)
|
CROWN PRO-PM ROUND NOSE SCRAPERS ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY PRODUCING A LONG LASTING CUTTING EDGE. THESE ROUND NOSE SCRAPERS ARE ALL-AROUND TOOLS USED FOR GENERAL SCRAPING OPERATIONS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
PRO-PM SKEW CHISELS
|
| 3/4" Pro-pm Skew Chisel
...plus other(s)
|
CROWN PRO-PM SKEW CHISELS ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY PRODUCING A LONG LASTING CUTTING EDGE. THESE TRADITIONAL SQUARE EDGED TURNING CHISELS ARE USED FOR BEADING, PLANING AND GENERAL SPINDLE WORK. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
PRO-PM DIAMOND PARTING TOOL
|
| 3/16" Pro-pm Diamond Parting Tool
|
THIS CROWN PRO-PM DIAMOND PARTING TOOL IS MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY PRODUCING A LONG LASTING CUTTING EDGE. USED FOR PARTING CUTS AND FINE DETAIL WORK, THE LONGER VERTICAL CROSS SECTION ON THIS TOOL HELPS REDUCE VIBRATIONS WHILE THE TAPERED SIDES EFFECTIVELY EJECT WASTE MATERIAL FOR COOLER, CLEANER CUTS. THE HIGH SPEED STEEL BLADE IS MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLE IS DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLE HAS BRASS FERRULE. PACKAGED IN PLASTIC SLEEVE FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' WEDGE TURNING TOOL MAKES SUPERB COVES AND MORE
|
| 3/8" Wedge Tool
...plus other(s)
|
GREAT FOR COVES ON SPINDLE OR FACEPLATE WORK, CROWN TOOLS' WEDGE TURNING TOOL IS ALSO EFFECTIVE FOR FINE FINISHING CUTS ON SMALL BOWLS AND GOBLETS:
8-1/2" HIGH SPEED STEEL BLADE; BEECH HANDLE WITH BRASS FERRULE; APPROXIMATELY 15" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' 3 POINT TURNING TOOL
|
| 3/8" Three Point Tool
...plus other(s)
|
A UNIQUE, MULTI-PURPOSE TOOL THAT CAN BE USED AS A SKEW, CROWN TOOLS' 3 POINT TURNING TOOL IS ALSO EFFECTIVE FOR END GRAIN PLANING, SHOULDER WORK, BEADING, FACEPLATE AND OTHER SPINDLE WORK:
HIGH SPEED STEEL BLADE WITH 4-1/2" BEECH HANDLE AND BRASS FERRULE; 10-1/4" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SKEWJY GOUGE IS A MULTIPURPOSE TURNING TOOL
|
| 3/8" Skewjy Gouge
...plus other(s)
|
THE "ALAN BEECHAM" SKEWJY GOUGE PERFORMS THE FUNCTIONS OF BOTH A SKEW AND A GOUGE WITH A REDUCED CHANCE OF "CATCH":
3/8" THICK HIGH SPEED STEEL CUTTER. 19-1/2" OVERALL TOOL LENGTH. VERSATILE TURNING TOOL WORKS EQUALLY WELL ON HARD AND SOFT WOODS. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN MULTI-TIP SCRAPER
|
| Multi-tip Scraper
...plus other(s)
|
THE CROWN TOOLS MULTI-TIP SCRAPER SYSTEM PROVIDES THREE INTERCHANGEABLE SCRAPER CUTTERS IN ONE HANDLE FOR GENERAL SCRAPING AND HIGH-SPEED SHEAR-SCRAPE FINISHING. THE TOOL COMES WITH A 1" DIAMETER ROUND CUTTER, A 1" SQUARE CUTTER AND A 1" X 1-1/2" PEAR SHAPED CUTTER. ALL CUTTERS CAN BE QUICKLY ROTATED BY LOOSENING THE SET SCREW TO EXPOSE A NEW SHARPENED EDGE THEREBY REDUCING THE SHARPENING TIME. CAN BE USED IN COMBINATION WITH THE "BEAVER" DEEP HOLLOWING TOOLS FOR QUICKLY OPENING OUT HOLLOW FORMS:
COMPLETE INSTRUCTIONS INCLUDED. 19-1/2" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
CROWN BEAVER DEEP HOLLOWING TOOLS - 115-613.
|
|
|
|
Hand Tools - Turning
|
BEAVER DEEP HOLLOWING TOOLS
|
| Beaver Deep Hollowing Tool
...plus other(s)
|
DESIGNED FOR HOLLOWING END GRAIN, THE "BEAVER" DEEP HOLLOWING TOOLS FROM CROWN TOOLS WILL REACH DEEP INTO OPEN BOWLS AND HOLLOW FORMS WITH FAST EFFICIENT CUTTING. THE TOOLS HAVE AN OVERALL LENGTH OF ABOUT 28" AND THE ROUND STEEL BARS EXTEND ABOUT 14" FROM THE HANDLE. THE STRAIGHT TOOL IS USED FOR OPENING OUT FORMS AND THE SWAN NECK TOOL FOR INSIDE WALL AND UNDER RIM WORK. THE REPLACEABLE HIGH SPEED STEEL RING TYPE CUTTER IS FITTED WITH AN ADJUSTABLE TOP WHICH CONTROLS THE DEPTH OF CUT. CAN BE USED IN COMBINATION WITH THE CROWN MULTI-TIP SCRAPER FOR HIGH-SPEED SHEAR-SCRAPE SURFACE FINISHING:
COMPLETE INSTRUCTIONS INCLUDED. 28" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
CROWN MULTI-TIP SCRAPER - 115-610.
|
|
|
|
Hand Tools - Turning
|
CROWN BOX SCRAPERS
|
| 1/4" Box Scraper
...plus other(s)
|
DESIGNED BY BRITISH WOODTURNER ALBERT HARRISON AND MANUFACTURED BY CROWN TOOLS, THESE PREMIUM BOX SCRAPERS WILL QUICKLY AND EASILY CLEAN THE INSIDE WALLS OF BOXES AND OTHER STRAIGHT WALLED TURNINGS:
1/4" SCRAPER HAS A 6" LONG HIGH SPEED STEEL BLADE 3/8" SCRAPER HAS A 6-3/4" LONG HIGH SPEED STEEL BLADE. HANDLES ARE 8-1/2" LONG WITH BRASS FERRULES. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN RING HOLLOWING TOOLS
|
| 1/2" Ring Tool
...plus other(s)
|
THESE DUAL BEVEL HIGH SPEED STEEL RING HOLLOWING TOOLS FROM CROWN TOOLS ARE USED FOR DEEP HOLLOWING APPLICATIONS. THEY ARE DESIGNED SPECIFICALLY FOR HOLLOWING INTO END GRAIN BUT CAN ALSO BE USED TO CLEAN UP ROUGH SURFACES ON SPINDLES AND THE INSIDE AND OUTSIDE OF BOWLS WHEN USED AT HIGH SPEEDS IN A SHEAR TYPE FINISHING CUT:
1/2" TOOL HAS 6-3/4" LONG BAR AND 1" TOOL HAS 11" LONG BAR. HANDLES ARE MADE OF DISTINCTIVE CLOSE-GRAINED BEECH WITH BRASS FERRULES. 15" OAL - 1/2" TOOL; 25" OAL - 1" TOOL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
ONEWAY SURE-GRIP HANDLES
|
| 17-1/2" Sure-grip Handle
...plus other(s)
|
12" LONG AND 17-1/2" LONG ONEWAY SURE-GRIP HANDLES ARE MADE OF HEAVY DUTY STEEL WITH A THICK PLASTIC COATING FOR A COMFORTABLE NON-SLIP GRIP AND REDUCED VIBRATIONS. EACH HANDLE HAS A 1/2" HOLE IN ONE END AND A 5/8" HOLE IN THE OTHER END. TOOLS ARE HELD IN PLACE WITH TWO SET SCREWS. TWO OPTIONAL ADAPTERS ARE AVAILABLE TO ACCOMMODATE 3/8" AND 3/4" SHAFT DIAMETER TOOLS:
HANDLES WILL ACCEPT ONEWAY GOUGE BLADES, WOODCUT TOOLS, KELTON TOOLS, SCORPION TOOLS AND MANY OTHERS. CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY GOUGE BLADES - 129-719. PRO-FORME HOLLOWING TOOLS - 131-552. WOODCUT FLEXI TOOLS - 155-168. WOODCUT CUP HOLLOWER - 130-844. KELTON TOOLS - 961-920. SCORPION TOOLS - 137-057.
|
|
|
|
Hand Tools - Turning
|
MASTERCUT BOWL GOUGE BLADES
|
| 3/8" Mastercut Bowl Gouge Blade
...plus other(s)
|
MADE OF CPM M4 HIGH SPEED STEEL AND HARDENED TO 63RC, ONEWAYS MASTERCUT BOWL GOUGE BLADES WILL HOLD AN EDGE A LOT LONGER THAN STANDARD HIGH SPEED STEEL. THE BLADES WILL SHARPEN EASIER AND HAVE A LONGER LIFE BECAUSE THE POWDER METAL PROCESS PRODUCES A STEEL WITH FINER PARTICLES AND A MORE UNIFORM CONSISTENCY. THE FLUTE DESIGNS ALSO ACHIEVE A WELL BALANCED COMPROMISE BETWEEN CUTTING EDGE AND TORSIONAL RESISTANCE PRODUCING TOOLS THAT ARE GOOD FOR BOTH HEAVY CUTTING AND HIGH SPEED FINISHING OPERATIONS:
BLADES DESIGNED FOR ONEWAY SURE-GRIP HANDLES BUT ALSO FIT KELTON AND PRO-FORME HANDLES. 12-5/8" OAL (HANDLES NOT INCLUDED). CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY SURE-GRIP HANDLES - 129-683. KELTON HANDLES - 130-776. PRO-FORME HANDLES - 130-817.
|
|
|
|
Hand Tools - Turning
|
KELTON HOLLOWING RIG
|
| 21" Deep Boring Bar
...plus other(s)
|
|
|
|
Hand Tools - Turning
|
KELTON TOOL GATES
|
| Tool Gate W/1" Post
...plus other(s)
|
THE 7/8" WIDE KELTON TOOL GATES PROVIDE THE ADDITIONAL LEVERAGE AND SUPPORT NECESSARY TO CONTROL FAST CUTTING DURING ADVANCED HOLLOWING OPERATIONS:
FEATURES A SWIVELING GATE REST WITH ROUND HARDENED ROLL PIN. SET SCREW ALLOWS GATE SHAFT TO BE MOVED HORIZONTALLY MOVING GATE CLOSER TO OR AWAY FROM TOOL REST SHAFT. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KELTON HOLLOWER TOOLS - 961-920.
|
|
|
|
Hand Tools - Turning
|
IRONS TOOL GATE PROVIDES EXCELLENT WOODTURNING CONTROL
|
| Irons Tool Gate, 1" Post
...plus other(s)
|
THE WOODCUT® IRONS TOOL GATE PIVOTING SADDLE FIRMLY SUPPORTS PRO-FORME AND OTHER ROUND SHAFT TURNING TOOLS WHILE CUTTING:
GATE EXTENSION PLATFORM FIRMLY CONNECTS TO TOOL SUPPORT POST WHILE AN ADJUSTABLE LOCKING COLLAR CAN BE TIGHTENED ONCE PROPER TOOL HEIGHT HAS BEEN SET. 5/8" AND 1-1/8" "U" SHAPED TOOL GUIDES, PLATFORM AND TOOL POST INCLUDED. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-FORME TOOLS - 131-552.
|
|
|
|
Advanced Search Tools
Browse
