|
|
|
Bits Drill And Boring - Specialty
|
CONFIRMAT STYLE CONNECTING SCREWS JOIN PARTICLEBOARD, MDF OR MELAMINE CABINET BOXES
|
| Confirmat Style Step Drill Bit
...plus other(s)
|
FOR BEST PERFORMANCE, CONNECTING SCREWS SHOULD BE INSTALLED BY BORING A PILOT HOLE USING THE OPTIONAL STEPPED DRILL BIT:
BOTH ARE 7MM DIAMETER X 50MM LENGTH WITH #3 POZI DRIVE. 128-498 HAVE COUNTERSINKING NIBS AND SHARP POINT. 128-495 HAVE FLAT POINT AND SMOOTH UNDERSIDE OF HEAD. BOTH ARE BRIGHT ZINC PLATED; SOLD IN BAGS OF 100. OPTIONAL CONFIRMAT STYLE STEP DRILL BIT IS 5MM/7MM/10MM X 5-3/4".
|
|
|
|
Bits Driver - Insert Drivers
|
BOSCH IMPACTOR™ "HAMMER AND ANVIL" SYSTEM PRODUCES TWICE THE TORQUE OF GEAR DRIVEN DRIVERS
|
| 1/4" Magnetic Nut Setter
...plus other(s)
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
MAGNETIC BIT HOLDERS MAKE DRIVING SCREWS EASIER
|
| 3" Magnetic Bit Holder
...plus other(s)
|
A MAGNETIC BIT HOLDER MAGNETIZES THE DRIVER BIT SO SCREWS WON'T FALL OFF:
3" OR 6" LONG - 1/4" HEX SHANK ON ONE END, HOLDS 1/4" HEX SHANK DRIVER BITS ON THE OTHER. ONLY WORK WITH 1" LONG DRIVER BITS. USA.
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
DRILL AND DRIVER BITS THAT EXCEL AT SPECIALTY APPLICATIONS
|
| 1/4-20 Hanger Bolt Driver
...plus other(s)
|
EASILY INSTALL HANGER BOLTS WITH YOUR POWER DRILL AND A HANDY, 1-3/4" LONG HANGER BOLT DRIVER:
TIGHTEN 1/4" HEX SHANK INTO DRILL CHUCK, THREAD IN HANGER BOLT AND DRIVE IT IN - REVERSE DRILL TO REMOVE DRIVER. 128-492 - SUPER MAGNETIC BIT HOLDER WITH 1/4" HEX SHANK IS 2-3/8" OAL. ADJUSTABLE DEPTH STOP. IMPORTED.
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
DEPTH ADJUSTABLE BIT HOLDER
|
| Super Magnetic Bit Holder
|
SUPER MAGNETIC BIT HOLDER WITH 1/4" HEX SHANK IS 2-3/8" OAL:
ADJUSTABLE DEPTH STOP. IMPORTED.
|
|
|
|
Bits Driver - Phillips
|
QUICKSCREWS® DRIVER BITS ARE THE TOUGHEST AROUND - WE GUARANTEE IT!
|
| #1x1" Phillips Driver Bit
...plus other(s)
|
QUICKSCREWS® DRIVER BITS ARE HARDENED STEEL FOR LONG LIFE AND TO RESIST STRIPPING UNDER HARD USE:
1/4" HEX SHANKS FOR USE IN ALL DRILL/DRIVERS. AVAILABLE IN VARIOUS LENGTHS - PHILLIPS, SQUARE, TORX® OR POZI DRIVES. 1" LENGTH BITS ARE INSERT STYLE; ALL BITS 1-15/16" AND LONGER HAVE BALL DETENT. 111-986 IS A #2 PHILLIPS(REDUCED) FOR DRYWALL SCREWS. IMPORTED.
|
|
|
|
Bits Driver - Sets
|
10 PIECE DRIVE BIT SET INCLUDES MAGNETIC HOLDER
|
| 10 Piece Insert Bit Kit
|
WITH THE QUICK$CREWS® MODEL 11795 10 PIECE INSERT DRIVE BIT KIT YOU'LL HAVE JUST ABOUT EVERY BIT YOU'LL NEED - JUST ADD YOUR POWER DRILL:
#1, #2, #3 PHILLIPS. #2 REDUCED PHILLIPS. #1, #2, #3 POZIDRIV®. #1 AND #2 SQUARE. 2" LONG, 1/4" HEX SHANK, QUICK RELEASE MAGNETIC BIT HOLDER. DRIVE BITS ARE 1" LONG - SET INCLUDES NESTED PLASTIC STORAGE CASE.
|
|
|
|
Bits Driver - Square
|
HARDENED INSERTS EXTEND THE USEFUL LIFE OF THESE TWO PIECE SQUARE DRIVE BITS
|
| Sq1x1" 2-pc Insert Bit-zp
...plus other(s)
|
ZINC PLATED BODIES WITH HARDENED STEEL INSERTS MAKE THESE SQUARE DRIVER BITS IDEAL FOR PRODUCTION WORK IN NEARLY ANY ENVIRONMENT:
ZINC PLATED STEEL BODIES ARE FITTED WITH S-2 GRADE STEEL INSERTS HARDENED TO RC58 FOR DURABILITY. AVAILABLE IN 1" TO 6" LENGTHS IN SQ1 AND SQ2 DRIVE. 1" BITS ARE 'INSERT' STYLE ? DESIGNED FOR USE IN MAGNETIC HOLDERS. 2" AND LONGER BITS ARE 'POWER BIT' STYLE WITH DETENTS FOR USE IN QUICK CONNECT CHUCKS. SOLD IN PACKAGES OF 10 BITS. IMPORTED.
|
|
|
|
Bits Driver - Torx
|
DRIVER BITS FOR STAR DRIVE SCREWS
|
| T30x1" Torx Driver Bit
...plus other(s)
|
|
1/4" HEX SHANK BITS DESIGNED TO HANDLE DRIVING TORXTM OR STAR DRIVE FASTENERS. TOUGH, HARDENED STEEL FOR LONG LIFE AND RESISTANCE TO STRIPPING UNDER HEAVY LOADS. T10, T25 AND T30 SIZES AVAILABLE IN 1" INSERT BIT LENGTH AND 1-15/16" POWER BIT LENGTH. LENGTHS OVER 1" HAVE BALL DETENT. T20 AVAILABLE IN 1" INSERT, 1-15/16" POWER BIT AND 6" POWER BIT LENGTH DESIGNED FOR POCKET HOLE APPLICATIONS. IMPORTED.
|
|
|
|
Fasteners - Knock Down (kd)
|
KV® 516ZC COUNTERTOP JOINT FASTENERS
|
| 14-20 X 3-1/2" Drawbolt-500
...plus other(s)
|
ZINC-COATED KV® JOINT FASTENERS APPLY EVEN, CONTROLLED PRESSURE IN 3/4" MATERIAL WITHOUT TWISTING OR BUCKLING:
GREAT FOR CUSTOM COUNTERTOPS, DESKTOPS, KNOCK-DOWN FURNITURE AND FIXTURES. 516 ZC TITE-JOINT FASTENERS HAVE A CENTER-TO-CENTER DISTANCE THAT ADJUSTS FROM 2" TO 3-1/2". FIT INTO 5/8" DEEP X 7/8" DIA. HOLE AND USE A 7/16" DIA. HOLE FOR THE CROSSMEMBER. SOLD INDIVIDUALLY OR IN BOXES. OPTIONAL ACCESSORIES HELP SPEED INSTALLATION. 513 ZC ECONOMY FASTENERS HAVE A 4" LONG BOLT WITH 7/16" HEAD AND TWO 3/16" X 7/16" X 1-1/4" FLAT BAR PLATES. AVAILABLE IN PACKAGES OF 10, 100 AND 500.
|
|
|
|
Fasteners - Machine Screws
|
COMBO-TRUSS MACHINE SCREWS™ FOR PULLS, KNOBS AND HANDLES
|
| 8-32x7/8 Truss Hd Mach Screw
...plus other(s)
|
AVAILABLE IN BOXES OF 100 IN 3/8" TO 2" LENGTHS, #8-32 COMBO-TRUSS MACHINE SCREWS™ COME WITH A ZINC FINISH AND FEATURE:
TRUSS HEADS WITH MACHINE SCREW THREADS. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
#4 X 5/8" FLAT HEAD STATUARY BRONZE WOOD SCREWS
|
| #4x5/8 Fl-ph Hdw Screws Stat Brnz
...plus other(s)
|
STATUARY BRONZE PLATED SCREWS MATCH DARK ANTIQUE HARDWARE FINISHES. IN PAST YEARS, FURNITURE HARDWARE WAS FINISHED IN STATUARY BRONZE. THIS FINISH LOOKED GREAT WITH TRADITIONAL FURNITURE DESIGNS AND FINISHES. OVER THE YEARS, STATUARY BRONZE SCREWS HAVE BECOME HARDER TO FIND, YET MOST OF THE HARDWARE IS STILL AVAILABLE:
USE THESE SCREWS FOR RESTORING OLDER FURNITURE OR CREATING NEW CLASSICS - FLAT AND PAN HEAD STYLES.
|
|
|
|
Fasteners - Wood Screws
|
BLUM® T59.3570 TANDEM™ DRAWER SLIDE SPACERS
|
| 6.3mmx13mm Fl-pz Euro Screws Np
...plus other(s)
|
|
BLUM® T59.3570 TANDEM™ SPACER BLOCKS ARE USED TO MOVE TANDEM PLUS™ SLIDES AWAY FROM CABINET SIDES FOR CLEARANCE FOR INTERIOR DRAWERS OR ROLL-OUT TRAYS: 25MM (1") THICK PLASTIC SPACER BLOCKS ARE FASTENED TO CABINET SIDES AND SLIDES USING 13.5MM EURO SCREWS - TWO SPACERS PER RUNNER ON SLIDES FROM 9" TO 15"; THREE SPACERS PER SLIDE FOR LONGER SLIDES. PACKED 5 PAIRS OF SPACERS AND 40 SCREWS PER BAG. BOXES OF 100 SPACERS REQUIRE 807-275 EURO SCREWS (SOLD SEPARATELY). LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® BLACK OXIDE ASSEMBLY SCREWS #2 SQUARE
|
| #8x1 Fl-sq Q$ Assembly Screws-black
...plus other(s)
|
QUICK$CREWS® GENERAL PURPOSE ASSEMBLY SCREWS FEATURE DEEP,WIDE THREADS A SMOOTH COUNTERSINK ON THE HEAD AND A BLACK OXIDE FINISH:
QUICKSCREW™ COARSE THREADS PROVIDE EASY STARTS AND QUICK PENETRATION IN COMPOSITES AND TOUGH MATERIALS. #2 SQUARE DRIVE(R2) GIVES MORE POSITIVE DRIVE AND REDUCED CAMOUT. #9 SCREWS HAVE #8 HEAD. SOLD IN BAGS OF 100, BOXES OF 500 OR 1,000 AND BULK QUANTITY CASES. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® WOODEN KNOB MOUNTING SCREWS
|
| #12x1-1/2 Rwh Ph+sl Knob Screw Zp
...plus other(s)
|
QUICKSCREWS® ZINC-FINISH KNOBSCREWS™ ARE LONG ENOUGH TO INSTALL WOODEN KNOBS ON THICKER DOORS OR DRAWER FRONTS::
FOR USE ON WOODEN KNOBS WITHOUT THREADED INSERTS. COARSE, TYPE B THREAD. ROUND WASHER HEAD. PHILLIPS/SLOTTED COMBO DRIVE. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® DRAWER FRONT ADJUSTING SCREWS-COMBO DRIVE
|
| #8x1 Rwh-co Q$ Dfa Scrw T17 Zp
...plus other(s)
|
QUICKSCREWS® DRAWER FRONT ADJUSTING SCREWS FEATURE LARGE ROUND WASHER HEADS AND TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING:
AVAILABLE BY THE BAG, BOX OR CARTON #8, ZINC PLATED SCREWS.QUICK$CREW®COARSE THREAD FOR OPTIMAL HOLDING. SMOOTH SHANK FOR BETTER DRAW DOWN. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® COMPACT HINGE MOUNTING SCREWS
|
| #8x5/8 Pn-sq Q$ Hng Screw T17 Zp
...plus other(s)
|
AVAILABLE BY THE BAG, BOX OR CASE IN 5/8" TO 3/4" LENGTHS, QUICKSCREWS® #8 COMPACT HINGE SCREWS FEATURE A ZINC FINISH AND #2 SQUARE DRIVE:
PAN HEADS WITH TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICKSCREW® THREAD FOR OPTIMAL HOLDING. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #8 X 1-1/4 INCH FLAT HEAD ZINC PLATED SCREWS #2 SQUARE DRIVE
|
| #8x1 Fl-sq Q$ Assy T17 Zp Nibs
...plus other(s)
|
QUICKSCREWS® FLAT HEAD SCREWS FEATURE SELF COUNTERSINKING NIBS AND #2 SQUARE DRIVE. AVAILABLE BY THE BAG, BOX OR CARTON IN 1" TO 4" LENGTHS, QUICKSCREWS® #8, #9 AND #10 ZINC ASSEMBLY SCREWS FEATURE:
TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® COARSE THREAD FOR OPTIMAL HOLDING. SMOOTH SHANKS FOR BETTER DRAWDOWN. FLAT HEADS (#9 SCREWS HAVE #8 HEADS) WITH NIBS FOR SELF COUNTERSINKING. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #6 DRAWER SLIDE MOUNTING SCREWS #1 SQUARE DRIVE
|
| #6x1/2 Fl-1sq Slide Screw T17 Zp
...plus other(s)
|
QUICKSCREWS® FLAT HEAD #6 DRAWER SLIDE SCREWS HAVE ZINC PLATING FOR DURABILITY. AVAILABLE BY THE BAG, BOX OR CARTON IN 1/2" TO 1-1/2" LENGTHS:
TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. #1 SQUARE RECESS FOR NON-SLIP DRIVINGQUICK$CREW® COARSE THREAD FOR OPTIMAL HOLDING. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #8 X 1-1/2" BLACK OXIDE ASSEMBLY SCREWS
|
| #8x1 Fl-sq Q$ Assy T17 Blk Nibs
...plus other(s)
|
QUICKSCREWS®BLACK ASSEMBLY SCREWS FEATURE SELF DRILLING AUGER POINTS AND SELF COUNTERSINKING NIBS:
AVAILABLE IN 1" TO 4" LENGTHSTYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® COARSE THREAD DRIVES QUICKLY AND CLEANLY FOR OPTIMAL HOLDING. SMOOTH SHANKS FOR BETTER DRAWDOWN.#9 SCREWS HAVE #8 HEAD SIZEIMPORTED.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
