|
|
|
Abrasives - Not Listed Elsewhere
|
MOUNTED AND UNMOUNTED FLAP SANDING WHEELS
|
| 1" X 1" X 1/4" 60x Flap Wheel
...plus other(s)
|
A&H ABRASIVES™ ALUMINUM OXIDE MOUNTED AND UNMOUNTED FLAP WHEELS ARE WELL SUITED FOR DEBURRING, SCALE REMOVAL, CLEANING AND SURFACE PREPARACTION ON FERROUS AND NON-FERROUS METALS, PLASTICS, RUBBER AND WOOD:
MOUNTED FLAP WHEELS HAVE A 1/4" SHANK ALLOWING MOUNTING ON A 1/4" OR LARGER CHUCK - IDEAL FOR HIGH RPM DIE GRINDERS, AIR TOOLS, DRILL MOTORS AND OTHER PORTABLE AND STATIONARY POWER TOOLS. UNMOUNTED FLAP WHEELS ARE BEST FOR A UNIFORM FINISH ON CONTOURED PARTS (METAL, PLASTIC, WOOD) - USE WITH PORTABLE AIR TOOLS, ELECTRIC TOOLS AND BENCH GRINDERS. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
INTACAP® KEEPS GRIME AND DIRT OUT OF PNEUMATIC TOOLS
|
| Air Tool End Caps
|
INTACAP® PNEUMATIC TOOL CAPS HELP PREVENT THE WEAR AND TEAR OF DUST AND CONTAMINANTS INSIDE OF AIR-POWERED TOOLS:
PLIABLE, FORM FITTING CAP ON ONE END FITS OVER AND SEALS THE 1/4" AIR TOOL INTAKE CONNECTOR - RING ON OPPOSITE END ATTACHES TO TOOL TO PREVENT LOSS. BRIGHT YELLOW FOR VISIBILITY; SOLD IN PACKAGES OF 5. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
LIGHTWEIGHT HOSE REEL COMES WITH 100 FEET OF HOSE
|
| 100 Ft. Hose Reel
|
THE LIGHTWEIGHT POWERPORT PRODUCTS HOSE REEL WITH HOSE CAN BE WALL MOUNTED OR HAND CARRIED:
UV-STABILIZED POLYPROPYLENE REEL INCLUDES CRANK HANDLE, TOP CARRYING HANDLE AND 5' LONG FULL-FLOW SWIVEL SUPPLY HOSE. CAN ALSO BE WALL MOUNTED. 100' LONG, 3/8" ID PVC AIR HOSE HAS 1/4" NPT FITTINGS - 300 PSI MAXIMUM WORKING PRESSURE. WEIGHS LESS THAN 25 LBS. LIFETIME MANUFACTURER'S WARRANTY.
|
|
|
|
Air Tool Accessories - Hoses
|
PORTER-CABLE® AIR HOSE
|
| 3/8" X 25' Vinyl Air Hose, 1/4"npt
...plus other(s)
|
GIVE YOUR AIR COMPRESSOR A BREAK BY USING ADDITIONAL PORTER-CABLE® VINYL AIR HOSE INSTEAD OF EXTENSION CORDS - YOU'LL GET THE SAME PRESSURE WHILE YOUR COMPRESSOR WILL LAST LONGER AND HAVE MORE POWER:
3/8" - 300 PSI. WILL ACCOMMODATE GRINDERS, SANDERS, DRILLS AND OTHER LARGE AIR TOOLS. 1/4" NPT MALE BRASS FITTINGS SECURED WITH FERRULES ON BOTH ENDS. PREMIUM PVC COVER WITH HEAVY-DUTY SPIRAL REINFORCEMENT. ABRASION RESISTANT, NON MARRING. USA.
|
|
|
|
Bits Driver - Extractors
|
GRABIT® REMOVES DAMAGED OR FREE SPINNING SCREWS EASILY
|
| Grabit Screw Extractor
|
HIGH QUALITY, TOOL STEEL GRABIT® POWER SCREW EXTRACTORS HAVE SERRATED EDGES FOR AGGRESSIVE PERFORMANCE, MEANING THEY WILL WORK ON MOST HEX, PHILLIPS, POZI, TORX® AND SQUARE HEAD FASTENERS - EVEN NO.6 TO NO.14 MECHANICAL SCREWS:
BURNISHING END IS FIRST USED TO REMOVE FASTENER'S CASE HARDENED LAYER AND CREATE A GRIPPING SURFACE. THEN, THE OPPOSITE REMOVER END CAN GRIP THE SCREW AND REMOVE IT FROM WOOD, METAL OR PLASTIC. USE 1/4" HEX SHANK EXTRACTORS WITH A VARIABLE SPEED, REVERSIBLE DRILL OR MANUALLY WITH A 1/4" HEX NUT DRIVER. SUITABLE FOR ALMOST ANY ALLOY FASTENER, INCLUDING SOFT BRASS. TWO DIFFERENT DIAMETER EXTRACTORS (EACH APPROXIMATELY 2" LONG), 5/8"H X 3-3/8"W X 2-1/2"D PLASTIC STORAGE CASE AND COMPLETE INSTRUCTIONS INCLUDED. NOTE: EXTRACTOR CAN BE COMPROMISED IF REMOVING LARGE SCREWS EXCEEDING 2" IN LENGTH AND/OR HAVING AGGRESSIVE THREADS. IMPORTED.
|
|
|
|
Chemicals - Cleaners
|
ALL IN ONE METAL SURFACE CLEANER, LUBRICANT AND PROTECTANT
|
| Top-saver System
|
TOPSAVER™ REMOVES RUST AND CORROSION FROM METAL SURFACES LIKE POWER TOOL TABLES AND PREVENTS RUST FROM RETURNING 5 TIMES LONGER THAN OTHER SURFACE TREATMENTS:
SIMPLY APPLY USING PUMP SPRAY APPLICATOR AND "MASSAGE" INTO SURFACE USING ABRASIVE PADS TO REMOVE RUST AND CORROSION. WIPE CLEAN, REAPPLY AND BUFF - WATERLESS FORMULA CONTAINS NO SILICONES OR TEFLON®. REGULAR USE SIGNIFICANTLY REDUCES SLIDING FRICTION AND BINDING AND REPELS DUST AND MOISTURE. WILL NOT BUILD UP, EVEN AFTER SEVERAL APPLICATIONS, AND WILL NOT STAIN WOOD. 8 OZ. BOTTLE OF TOPSAVER™ FLUID, PAIR OF LATEX FREE DISPOSABLE GLOVES, COARSE AND ULTRA FINE ABRASIVE PADS, COTTON SHOP CLOTHS AND INSTRUCTIONS INCLUDED. USA.
|
|
|
|
Chemicals - Lubricants
|
SLIPIT® LUBRICANTS ARE SPECIFICALLY DESIGNED FOR WOODWORKING
|
| Slipit Sliding Compound Gel
...plus other(s)
|
REPLACE ALL OF THOSE CANS OF MACHINE OIL, SILICONE, PASTE WAX OR OTHER PRODUCTS WITH SINGLE CONTAINERS OF SLIPIT®, SPECIFICALLY FORMULATED TO LUBRICATE AND PROTECT ALMOST ANYTHING. PRODUCTS ARE NON-GUMMING, ATTRACT LESS SAWDUST AND LAST LONGER:
909-314 - SIL-FREE SLIDING COMPOUND® 16 OZ. CAN: GEL FORMULA FOR TOOLS, TABLE SAWS, MITER GAUGE SLOTS AND RUNNERS, FENCES, RAILS AND TRUNNIONS. ALSO REDUCES FRICTION ON WOODEN WINDOWS, DOORS, DRAWERS OR ANYWHERE WOOD COMES IN CONTACT WITH WOOD. WON'T HARM FINISHED WOOD SURFACES; APPLY WITH A BRUSH. 921-103 - SIL-FREE TOOL LUBE® 12 OZ. NON-FLAMMABLE AEROSOL CAN: CONVENIENT SPRAY ON LUBRICATION FOR POWER AND HAND TOOLS, MOVING PARTS, BITS, CUTTING BLADES AND ROUTERS. INHIBITS RUST AND CORROSION. 921-614 - SIL-FREE LIQUI-FORM® 16 OZ. PUMP SPRAYER: SUITABLE FOR BANDSAW BLADES, TABLES, ROUTERS, SHAPERS, JOINTERS AND MORE. REDUCES DRAG AND PROLONGS TOOL LIFE. NON FLAMMABLE; NO CFCS; NON TOXIC; SILICONE FREE. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Chemicals - Lubricants
|
SLIPIT® LUBRICATES ALMOST EVERYTHING IN YOUR WOODSHOP
|
| Slipit Tool Lube Aerosol
...plus other(s)
|
REPLACE ALL OF THOSE CANS OF MACHINE OIL, SILICONE, PASTE WAX OR OTHER PRODUCTS WITH SINGLE CONTAINERS OF SLIPIT®, SPECIFICALLY FORMULATED TO LUBRICATE AND PROTECT ALMOST ANYTHING. PRODUCTS ARE NON-GUMMING, ATTRACT LESS SAWDUST AND LAST LONGER:
SIL-FREE TOOL LUBE® 12 OZ. NON-FLAMMABLE AEROSOL CAN: CONVENIENT SPRAY-ON LUBRICATION FOR POWER AND HAND TOOLS, MOVING PARTS, BITS, CUTTING BLADES AND ROUTERS. INHIBITS RUST AND CORROSION. SIL-FREE LIQUI-FORM® 16 OZ. PUMP SPRAYER: SUITABLE FOR BANDSAW BLADES, TABLES, ROUTERS, SHAPERS, JOINTERS AND MORE. REDUCES DRAG AND PROLONGS TOOL LIFE. SIL-FREE SLIDING COMPOUND® 16 OZ. CAN: GEL FORMULA FOR TOOLS, TABLE SAWS, MITER GAUGE SLOTS AND RUNNERS, FENCES, RAILS AND TRUNNIONS. ALSO REDUCES FRICTION ON WOODEN WINDOWS, DOORS, DRAWERS OR ANYWHERE WOOD COMES IN CONTACT WITH WOOD. WON'T HARM FINISHED WOOD SURFACES; APPLY WITH A BRUSH.
NON FLAMMABLE; NO CFCS; NON TOXIC; SILICONE FREE. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
NEW BESSEY® KLIKLAMP CAN APPLY LIGHT-AS-A-FEATHER UP TO 330 LBS. PRESSURE
|
| 4" Kliklamp
...plus other(s)
|
USING A MAGNESIUM JAW, GLASS-FIBER REINFORCED, POLYAMID LEVER AND STEEL RAIL, THE BESSEY® KLIKLAMP PROVIDES QUICK CLAMPING AND QUICK RELEASE ON VIRTUALLY ANY SHAPE OBJECT:
RATCHET ACTION RESISTS VIBRATION, MAKING CLAMP IDEAL FOR USE AROUND POWER TOOLS. 3" NOMINAL THROAT DEPTH. LIFETIME MANUFACTURERS WARRANTY. GERMANY.
|
|
|
|
Clothing - Aprons
|
RUGGED LEATHER APRON PROVIDES EXTRA PROTECTION WITHOUT THE EXTRA PRICE
|
| Leather Apron
|
NOTHING'S BETTER THAN LEATHER FOR TAKING THE ABUSE AND ABRASIONS OF WOODWORKING. BESIDES PROTECTING CLOTHES, THIS LEATHER APRON HELPS PREVENT LOOSE CLOTHING FROM BEING WHERE IT SHOULDN'T BE (LIKE NEAR A POWER TOOL):
THREE DOUBLE-STITCHED POCKETS HAVE PLENTY OF ROOM FOR PENCILS, A MEASURING TAPE, RULERS, ETC. - GROMMETS AND RIVETS MAKE THE POCKETS EXTRA DURABLE. CANVAS WEB SUSPENDERS USE ADJUSTABLE SNAP-LOCK CONNECTORS FOR A COMFORTABLE FIT. 32-1/2" LONG FRONT. IMPORTED.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
PORTER-CABLE® 10 GALLON WET/DRY VACUUM STARTS WHEN TOOL IS TURNED ON
|
| 7812 10 Gallon Wet/dry Vac
...plus other(s)
|
THE PORTER-CABLE® MODEL 7812 10 GALLON WET/DRY VACUUM IS GREAT FOR FINE PARTICULATE PICKUP LIKE DRYWALL OR SOLID SURFACE DUST. FEATURES INCLUDE:
120V, 9A MOTOR. BUILT-IN OUTLET FOR POWER TOOL (NOTE: POWER TOOL NOT TO EXCEED 120V, 6A) - VACUUM STARTS WHEN TOOL IS TURNED ON. 15 SECOND VACUUM OVERRUN CLEARS HOSE WHEN TOOL IS TURNED OFF. 99.85% FILTRATION EFFICIENCY @ 114 CFM. DUAL FILTRATION SYSTEM WITH WASHABLE AUTOMOTIVE TYPE PAPER FILTER AND 2 PLY, 10 GALLON PAPER FILTER BAG. CORROSION RESISTANT POLYPROPYLENE TANK; LARGE WHEELS FOR EASY MANEUVERING. INCLUDES HOSE AND OPERATING MANUAL. WEIGHS 26-1/4 LBS. ONE YEAR MANUFACTURER'S WARRANTY.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
SHOP-VAC® INDUSTRIAL ON-DEMAND-VAC™ SWITCHES ON WHEN POWER TOOL IS TURNED ON
|
| On Demand Vac Wet/dry Vacuum
...plus other(s)
|
TO USE THE 12 GALLON, SHOP-VAC® INDUSTRIAL WET/DRY ONDEMANDVAC™, PLUG IT INTO A 120V OUTLET, ATTACH THE VAC DUST HOSE TO YOUR 120V POWER TOOL EXHAUST PORT, PLUG THE TOOL INTO THE VACUUM AND, WHEN YOU TURN ON THE TOOL, THE VACUUM AUTOMATICALLY STARTS:
MODEL 925-63 FEATURES A POWERFUL 6 HP (PEAK), 10A MOTOR; THREE POSITION SWITCH - ON/OFF/AUTO. HANDLES POWER TOOLS UP TO 8A. 50% QUIETER THAN A STANDARD SHOP-VAC®. FEATURES LOCKON™ POSITIVE CONNECTION HOSE SYSTEM AND ONBOARD TOOL STORAGE. INCLUDES 1-1/4" DIA. X 12'L HOSE, TWO 1-1/4" DIA. EXTENSION WANDS, 10" COMBINATION NOZZLE AND SQUEEGEE, DUAL SURFACE SELECTOR NOZZLE, "GULPER" NOZZLE, ROUND BRUSH, CREVICE TOOK, UNIVERSAL TOOL ADAPTER, CARTRIDGE FILTER, FINE DUST COLLECTION FILTER BAG AND 18'L CORD. ONE YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Dust Collection - Not Listed Elsewhere
|
FEIN TURBO WET/DRY VACUUMS ARE POWERFUL, QUIET AND HAVE A TOOL-ACTIVATED SWITCH
|
| Turbo I-vs Wet/dry Vacuum 6 Gal
...plus other(s)
|
|
POWERFUL AND LOW NOISE LEVEL FOR PERFORMANCE AND COMFORT. TOOL ACTIVATED SWITCH TURNS ON VACUUM WHEN CONNECTED TOOL IS USED. LONG CORD AND HOSE ARE CONVENIENT STANDARD EQUIPMENT. 5 MICRON FABRIC BOOT FILTER CAN BE WASHED AND REUSED. LARGE FOOTPRINT MAKES VACUUM EXTREMELY STABLE. 2-STAGE MOTOR WITH BY-PASS COOLING TECHNOLOGY TO PREVENT HEAT DAMAGE. COPOLYMER PLASTIC TANK WILL NOT RUST OR CORRODE IN WET APPLICATIONS. ONE YEAR MANUFACTURERS WARRANTY, ITALY. NOTE: DUST BAGS & HEPA FILTERS FIT NEW AND OLD MODELS.
|
|
|
|
Hand Tools - Not Listed Elsewhere
|
FROM POWER CHOPPING TO FINE EDGE CUTTING, THESE HAND AXES DO IT ALL
|
| Firestone Handaxe
...plus other(s)
|
ERGONOMICALLY DESIGNED FIRESTONE HAND AXES REPRESENT THE ULTIMATE IN LIGHTWEIGHT VERSATILITY FOR OUTDOOR CHORES. ALL INCLUDE HANDCRAFTED, FULL GRAIN LEATHER BELT SHEATHS FOR "HANDLE UP" OR "HANDLE DOWN" CARRYING AND LIFETIME MANUFACTURER'S WARRANTIES:
117-935 - HANDAXE WEIGHS 12.5 OZ. AND IS 12" OVERALL; 3-5/8"W X 4-1/2"L BLADE. 117-938 - POCKETAXE WEIGHS 6.75 OZ. AND IS 9" OVERALL. BLADES AND TANGS ARE 1/8" THICK, 420 STAINLESS STEEL, HARDENED TO RC52/53. HOLLOW GROUND BLADES ARE HARD ENOUGH TO HOLD A KNIFE EDGE, BUT RESILIENT TO PREVENT CHIPPING. REINFORCED POLYSTYRENE HANDLES ARE TEXTURED FOR POSITIVE GRIP. HANDLE DESIGN ALLOWS AXES TO BE HELD COMFORTABLY FOR CHOPPING AND EDGE CUTTING. IMPORTED.
117-941, 117-944 - UTILITYAXE AND CARVINGAXE ARE DESIGNED FOR RUGGED OUTDOOR USE: UTILITYAXE WEIGHS 1 LB., 6 OZ. AND IS 12.5" OVERALL; 5"W X 4-1/2"L HOLLOW GROUND BLADE (CARVINGAXE HAS SAME HEAD DESIGN BUT DIFFERENT HANDLE ANGLE). HEADS ARE 440 STAINLESS STEEL, BEAD BLASTED FOR A QUALITY SATIN FINISH AND SECURED TO LAMINATED BIRCH HANDLES WITH SET SCREWS AND STAINLESS STEEL ROLL PINS. USA.
931-555 - VIKING BEARDED HAND AXE BLADE IS INVESTMENT CAST, HIGH CARBON 440C STAINLESS STEEL; HEAT TREATED AND ANNEALED TO HOLD A KNIFE-LIKE EDGE THROUGH THE HEAVIEST CUTTING, CHOPPING AND SKINNING TASKS. HANDLE IS A HANDCRAFTED MASTERPIECE OF LAMINATED FINNISH BIRCH AND IS SECURED BY A HARDENED STEEL SET SCREW AND SPRING STEEL ROLL PIN. USA. 117-938 IS LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hand Tools - Not Listed Elsewhere
|
SOLDER OR WELD AT 2,400°F VIRTUALLY ANYWHERE WITH LENK BUTANE POWERED TORCHES
|
| Micro-jet Butane Torch
...plus other(s)
|
PERFECT FOR THE WORKSHOP OR GARAGE, THESE CORDLESS, PORTABLE BUTANE TORCHES ARE SUITABLE FOR BRAZING, CIRCUIT REPAIRS, LIGHT PLUMBING, SHRINK TUBING AND MORE:
LMJ-320 - MICRO-JET™ USES A REFILLABLE CIGARETTE LIGHTER (INCLUDED) FOR ITS FUEL CELL AND WILL OPERATE FOR ABOUT ONE HOUR ON EACH FILLING: WIND AND WATERPROOF, IT'S IDEAL FOR OUTDOOR USE - PIEZO ELECTRONIC IGNITION. LPT-220 - PRO-TORCH™ BURNS APPROXIMATELY 220 MINUTES ON MINIMUM SETTING AND COMES WITH A STURDY REMOVABLE BASE: ADJUSTABLE AIR AND GAS FLOW VALVES - PIEZO ELECTRONIC IGNITION. LSP-60K - 4-IN-1 SOLDERPRO™ KIT INCLUDES: TORCH; CAP WITH MANUAL STRIKER; SOLDERING, HOT KNIFE, BLOW TORCH, DEFLECTOR AND HEAT BLOWER TIPS; PLUS A STORAGE CASE - OPERATES APPROXIMATELY 60 MINUTES PER FILLING. NOTE: FUEL NOT INCLUDED DUE TO D.O.T. HAZARDOUS MATERIALS REGULATIONS. FILL USING COLIBRI® PREMIUM BUTANE FUEL REFILL, ZIPPO® PREMIUM BUTANE FUEL OR SIMILAR PRODUCT. IMPORTED.
|
|
|
|
Hand Tools - Not Listed Elsewhere
|
PUSH-PULL SCREWDRIVER/DRILL WORKS LIKE A YANKEE®
|
| Push Pull Drill/driver
...plus other(s)
|
THE EAZYPOWER® ISOMAX® 17" PUSH-PULL SCREWDRIVER/DRILL MAKES QUICK WORK OF JOBS WHERE ELECTRICAL POWER IS NOT BE READILY AVAILABLE - ACCEPTS ALL STANDARD 1/4" HEX SHANK ADAPTERS, DRILL BITS AND POWER BITS:
WITH LOCK CONTROL "ON," TOOL CAN BE USED AS A 12" LONG RATCHETING SCREWDRIVER. FOR DRILLING, TURN THE LOCK "OFF" AND A SPRING LOADED SHAFT EXTENDS TOOL LENGTH TO 17". MOVE THE RATCHET SWITCH "UP" FOR CLOCKWISE DRILLING OR "DOWN" FOR COUNTERCLOCKWISE, INSTALL BIT AND PROCEED. COMES WITH 3" LONG #1, #2 PHILLIPS® POWER BITS, 3" LONG 6-8, 8-10 SLOTTED POWER BITS AND A 1/4" HEXBIT® DRILL BIT (OTHER ACCESSORIES SHOWN NOT INCLUDED). 141-584 - 12" PUSH-PULL SCREWDRIVER/DRILL IS SIMILAR BUT 9-1/2" LONG, EXTENDING TO 12". INCLUDES #1, #2, #3 PHILLIPS® POWER BITS, 4, 5, 8, 10 SLOTTED POWER BITS PLUS #2 SQUARE AND T15 TORX® POWER BITS. MANUFACTURER GUARANTEES SCREWDRIVER/DRILL AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP. IMPORTED.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
1/4" HEX SHANK KEYLESS CHUCK - 26-922. FOR ADDITIONAL DRIVER DRILL BITS AND ACCESSORIES, PLEASE VISIT THE WOODWORKER'S SUPPLY® WEB SITE.
|
|
|
|
Hand Tools - Striking
|
WOODEN CARVER'S MALLETS OFFER POWER AND CONTROL
|
| 16 Oz Wooden Carving Mallet
...plus other(s)
|
STUBAI WOODEN CARVER'S MALLETS ARE MADE FROM QUALITY BEECHWOOD AND HAVE ROUND HEADS SO FORCE IS CENTERED AND THEY WON'T SPIN WHEN YOU HIT AN EDGE:
SELECT THE 16 OZ. MALLET FOR EASIER WORKING OR THE HEAVIER 20 OZ. FOR TAKING AWAY LOTS OF WOOD - EACH IS 11-1/2" LONG. SINCE EACH TAP OF THE MALLET GIVES YOU BASICALLY THE SAME DEPTH OF CUT, CREATING AN EVEN BORDER OR FRAME WITH A CHISEL AND MALLET IS EASY. USA AND AUSTRIA.
|
|
|
|
Hand Tools - Striking
|
NON-MARRING DEADBLOW HAMMERS IN SIX SIZES
|
| Deadblow Hammer-1lb.
...plus other(s)
|
FILLED WITH LEAD SHOT FOR EXTRA FORCE AND SHOCK ABSORPTION, DEADBLOW HAMMERS WILL GIVE YOU THE POWER YOU NEED WHEN ASSEMBLING OR DISASSEMBLING PROJECTS:
LENGTHS RANGE FROM 8-3/4" TO 13-1/4". TEXTURED HANDLE GRIPS HELP ENSURE NON-SLIP CONTROL. IMPORTED.
|
|
|
|
Hand Tools - Turning
|
PRO-FORME HOLLOWING TOOL SYSTEM
|
| Powerhead Cutter W/gauge
...plus other(s)
|
THE WOODCUT® PRO-FORME HOLLOWING TOOLS ARE SOME OF THE MOST EFFECTIVE TURNING TOOLS AVAILABLE FOR DEEP HOLLOWING AND GENERAL ROUGHING WORK. THESE EFFICIENT TOOLS QUICKLY REMOVE LARGE AMOUNTS OF MATERIAL WITHOUT THE FEAR OF CATCH AND DIG-IN. THE SYSTEM INCLUDES THREE BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. THREE DIFFERENT 5/8" DIAMETER BORING BARS ARE AVAIABLE: STRAIGHT FOR GENERAL CUTTING OPERATIONS, SLIGHT BEND FOR INSIDE WALL CUTTING AND HEAVY BEND FOR INSIDE WALL AND UNDER-RIM CUTTING. THE REPLACEABLE POWERHEAD CUTTERS HAVE AN ADJUSTABLE GAUGE FOR LIGHT OR AGGRESSIVE CUTTING OPERATIONS AND THE PROMASTER 20" HANDLE WILL EXTEND REACH TO 10" BEYOND TOOL REST. AN OPTIONAL PRO-SCRAPER ASSEMBLY IS DESIGNED FOR HIGH-SPEED SURFACE FINISHING OPERATIONS:
PRECISION POWERHEAD CUTTERS FEATURE TRIPLE-TEMPERED HIGH SPEED STEEL WITH AN OPEN-SIDED HOOK TO ALLOW SHAVINGS TO BE EJECTED WITHOUT CLOGGING. CUTTERS ARE SHARPENED WITH HAND HELD DIAMOND HONES ROTATED AROUND THE CUTTER END - INSTRUCTIONS INCLUDED. PRO-FORME STARTER KIT INCLUDES STRAIGHT BORING BAR WITH POWERHEAD CUTTER AND A PROMASTER 20" HANDLE. PRO-FORME ADVANCED KIT INCLUDES STRAIGHT, SLIGHT BEND AND HEAVY BEND BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. 1-1/8" DIAMETER PROMASTER 20" HANDLE HAS A PADDED FOAM GRIP FOR COMFORT AND CONTROL. THE 5/8" DIAMETER END COUPLERS MAKE IT POSSIBLE TO JOIN TWO OR MORE HANDLES TOGETHER FOR AN EVEN LONGER REACH. OPTIONAL PRO-SCRAPER ASSEMBLY INCLUDES TWO HIGH SPEED STEEL SCRAPER CUTTERS. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FLEXI HOLLOWERS - 155-168. IRONS TOOL GATE - 130-805. DIAMOND FLEXI-SHARP HONES - 957-706. 4-WAY DIAMOND HONE - 874-974. DIA-SHARP HONES - 115-403.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
BLUM® AVENTOS HF BIFOLD LIFT SYSTEM PROVIDES EFFORTLESS OPENING AND SMOOTH, SILENT CLOSING FOR OVERHEAD CABINET DOORS
|
| Aventos Hf Lift W/cover 85-470pf
...plus other(s)
|
SPECIFICALLY DESIGNED FOR TOP-HINGED, BI-FOLD OVERHEAD CABINET DOORS, THE UNIQUE BLUM® AVENTOS HF BI-FOLD LIFT SYSTEM MAKES EVEN A HEAVY DOOR FEEL WEIGHTLESS. THE DOOR CAN BE OPENED EASILY OR LEFT AT ANY HEIGHT; RELEASE THE DOOR AND THE SOFT-CLOSING BLUMOTION MECHANISM LETS IT DOWN SMOOTHLY AND GENTLY:
SYSTEM WORKS WITH ALL COMMON DOOR WIDTHS AND HEIGHTS BY USING COMBINATIONS OF ONE, TWO OR THREE LIFT MECHANISMS AND ASSOCIATED TELESCOPIC ARMS. ASSEMBLES QUICKLY USING CLIP TECHNOLOGY - DOORS CAN LATER BE REMOVED AND REATTACHED WITHOUT TOOLS. SETTING PROPER TENSION FOR OPENING AND CLOSING POWER IS QUICK AND PRECISE. CABINET DOORS ADJUST IN ALL 3 DIMENSIONS. WORKS WITH WOOD OR ALUMINUM FRAME DOORS IN FACE FRAME OR FRAMELESS APPLICATIONS. USE 156-719 HARDWARE KIT FOR STANDARD WOOD DOORS OR WIDE ALUMINUM DOORS. ADD 156-722 BRACKET SET FOR FACE FRAME OR WIDE OVERLAY APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. IT IS RECOMMENDED THAT YOU REFER TO THE AVENTOS HF™ BROCHURE PRIOR TO STARTING INSTALLATION. REQUEST A COPY FROM YOUR SALES REPRESENTATIVE OR VIEW THE .PDF VERSION OF THE BROCHURE BELOW.
|
|
|
|
Hardware Shelf And Support - Brackets
|
SUPER HEAVY DUTY SHELVING STANDARDS AND BRACKETS CAN HOLD LUMBER, PIPING, POWER TOOLS AND MORE
|
| 24" Hd Shelf Standard
...plus other(s)
|
SUPER HEAVY DUTY SHELVING STANDARDS AND BRACKETS ARE FORMED FROM 3/16" THICK, HEAVY GAUGE STEEL TO HOLD EVEN THE HEAVIEST OBJECTS, SAFELY:
WHEN PROPERLY INSTALLED ONTO THE 24" LONG STANDARDS, 10" AND 18" BRACKETS CAN EACH SUPPORT UP TO 500 LBS., 1" FROM THE TIP. BLACK POWDER-COAT FINISH FOR DURABILITY. STANDARDS ARE PREDRILLED FOR 3/8" DIA. FASTENERS (FASTENERS NOT INCLUDED>). USA.
|
|
|
|
Machinery Accessories - Jigs And Fixtures
|
ANGLE°PERFECT III™ AND BLADEGAUGE III™ COMBO KIT
|
| Combo Kit Angle Per & Blade Gauge
|
THE KIT-1 ANGLE°PERFECT III™ & BLADEGAUGE III™ COMBO KIT WITH ZERO CLIP™ CAN HELP YOU SET UP ALMOST ANY POWER TOOL IN YOUR SHOP TO 1/100S-OF-1" ACCURACY:
ANGLE°PERFECT III™ USES AN LED TO LET YOU SET UP THE SIX CRITICAL ELEMENTS OF TABLESAW ALIGNMENT. 2-1/8H X 2W X 7-1/2"L; WEIGHS 12.8 OZ. USING THE BLADEGAUGE III™, YOU CAN DETERMINE TABLESAW BLADE AND ROUTER BIT HEIGHT FROM 1/32" TO 2", IN 1/32" INCREMENTS, BY ALSO USING THE BUILT-IN LED. 2-1/8H X 2W X 10"L; 12.8 OZ. MAGNETIC BASES ALLOW HANDS-FREE OPERATION - MAGAWIRE™ PROVIDES AN ELECTRICAL PATH FOR BLADEGAUGE III™ ON NON-CONDUCTIVE TABLE TOPS. FEATURING ZERO CLIP™, EITHER CAN BE USED TO ENSURE THAT JOINTER BLADES ARE INSTALLED PERFECTLY LEVEL. KIT COMES WITH FEELER GAUGE, EXTRA 3V BATTERY, BRASS SHIMS, EXTRA CLIPS, HEX WRENCH, CHOICE OF DEMONSTRATION DVD OR VHS TAPE, 2-3/4"H X 5"D X 11-3/4" WOOD STORAGE CASE AND COMPLETE INSTRUCTIONS. 2 LBS., 12 OZ. SHIPPING WEIGHT. ONE-YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA PRECISION MIDI CHUCK
|
| Precision Midi Chuck 1"-8tpi
...plus other(s)
|
THE TEKNATOOL NOVA PRECISION MIDI CHUCK CHUCK IS THE PERFECT COMPLEMENT TO MIDI AND SMALLER LATHES FOR PROJECTS LIKE PENS, BOXES, ORNAMENTS AND SMALL BOWL TURNING. LIKE ITS LARGER BROTHERS, THE G3 AND SUPERNOVA2, THIS CHUCK HAS AN AUTOMATIC SAFETY STOP ENSURING THE FOUR JAWS DON'T PROTRUDE BEYOND THE CHUCK BODY FOR SAFETY:
FEATURES FAST ACTION ONE TURN TIGHTENING. CHUCK IS FULLY COMPATIBLE WITH ALL TEKNATOOL NOVA ACCESSORY JAWS (NOT RECOMMENDED FOR USE WITH 3", 4" AND 5" STANDARD JAWS, POWERGRIP JAWS, STEP JAWS AND LONG NOSE JAWS). AVAILABLE IN TWO SPINDLE SIZES: 3/4"-16TPI AND 1"-8TPI. DOES NOT USE INSERTS. COMES WITH 50MM JAWS, WOODWORM SCREW, TOMMY BARS AND INSTRUCTION MANUAL. 3-1/2" DIA. X 2-3/8" DEEP WEIGHS APPROXIMATELY 3 LBS. FULLY ASSEMBLED. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
3/4"-16TPI FITS CRAFTSMAN, CORONET, RECORD, CARBA-TEC, KLEIN.
1"-8TPI FITS DELTA (MIDI, 14"), GENERAL (MAXI, 160), GRIZZLY (MIDI, 14"), JET (1014, 1220, 1236, 1442), ONEWAY (1224, 1336), RIKON MIDI, STEEL CITY MIDI, VICMARC 100, WOODTEK (MIDI, 12").
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
SUPERNOVA2 CHUCK - 961-892. NOVA G3 CHUCK - 962-546. STANDARD JAW SETS - 136-832. PIN JAW SET - 136-853. SPIGOT JAW SETS - 136-841. COLE JAW SET - 136-850. MINI COLE JAW SET - 136-856. SOFT JAW SET - 150-491. FACEPLATE RINGS - 136-871. WOODWORM SCREW - 136-880.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA POWERGRIP JAWS
|
| Long Nose Jaws
...plus other(s)
|
THE NOVA POWERGRIP JAWS HAVE 1-1/8" DEEP JAWS WITH INTERNAL SERRATIONS FOR EXCEPTIONAL HOLDING POWER. THE MULTI-PURPOSE JAWS HAVE AN EXTERNAL DOVETAIL ON THE OUTSIDE RIM DOUBLING AS 4" JAW SET:
PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA POWERGRIP JAWS
|
| Powergrip Jaws
|
THE NOVA POWERGRIP JAWS HAVE 1-1/8" DEEP JAWS WITH INTERNAL SERRATIONS FOR EXCEPTIONAL HOLDING POWER. THE MULTI-PURPOSE JAWS HAVE AN EXTERNAL DOVETAIL ON THE OUTSIDE RIM DOUBLING AS 4" JAW SET:
PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
QUICK-SET SHIELD™ WORKS WHERE OTHERS CAN'T REACH
|
| 6"x8" Quick Set Shield
...plus other(s)
|
AVAILABLE IN TWO SIZES, THE QUICK-SET SHIELD™ PROVIDES PROTECTION FROM FLYING CHIPS WHEN USING BANDSAWS, DRILL PRESSES, ROUTER TABLES OR OTHER POWER TOOLS:
FULL, 1/8" THICK POLYCARBONATE SHIELD ATTACHES TO A FLEXIBLE 14"L X 3/4" DIA. LOC-LINE® ARM AND SWIVELS A FULL 360°. SHIELDS COME WITH MAGNETIC AND DIRECT MOUNTS. USA.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
FINE TUNE YOUR TOOLS TO 0.001" ACCURACY WITH THE RED-LINE X POINT POWER TOOL SETUP GAUGE
|
| X-point Power Tool Setup Gauge
|
NOW YOU CAN ALIGN ALL OF THE COMPONENTS OF STATIONARY POWER TOOLS SO THEY CUT SMOOTHLY, QUIETLY AND WITH PERFECT ACCURACY. WITH THE RED-LINE X POINT POWER TOOL SETUP GAUGE YOU CAN TEST THE FLATNESS OF TABLESAW BLADES, CHECK TABLESAW ARBOR RUNOUT, ALIGN BLADE AND RIP FENCES WITH MITER SLOTS, SET MITER GAUGE ANGLES, MEASURE DRILL PRESS SPINDLE RUNOUT, SQUARE DRILL PRESS TABLE TO SPINDLE, SET JOINTER KNIVES AND CHECK BANDSAW TABLES FOR SQUARENESS TO THE BLADE:
THREE POINT BEARING GUIDES ENSURE A "SLOP FREE" FIT IN MITER GAUGE SLOTS; TWO POWERFUL RARE EARTH MAGNETS HOLD THE BASE TIGHT TO TOOL SURFACE, WHILE BASE LEVELING SCREWS ENSURE SQUARENESS TO TOOL SURFACES. SOLID ALUMINUM WITH PRECISION, EASY TO READ ANALOG DIAL INDICATOR. COMPLETE INSTRUCTIONS AND MOLDED PROTECTIVE CASE INCLUDED.
|
|
|
|
Machinery Accessories - Stands
|
DELTA® UNIVERSAL STAND
|
| Universal Stand
|
USING THE DELTA® 50-330 UNIVERSAL STAND YOU CAN CONVERT A BENCH TOP DRILL PRESS OR SIMILAR POWER TOOL INTO A FLOOR MODEL:
HEAVY GAUGE STEEL RAILS AND LEGS - BOLT TOGETHER ASSEMBLY. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Components - Controls
|
POWER-LOC™ AUXILIARY SAFETY POWER SWITCH MOUNTS ALMOST ANYWHERE
|
| Power-loc Auxiliary Switch
|
FROM BENCH DOG TOOLS®, THE POWER-LOC™ MODEL PWR400 AUXILIARY SAFETY POWER SWITCH IS A REMOTE CONTROL THAT CAN BE MOUNTED IN ALMOST ANY LOCATION - FITS YOUR ROUTER TABLE, FENCE, CABINET AND MANY OTHER LOCATIONS:
SIMPLY PLUG YOUR TOOL INTO THE SWITCH AND THE SWITCH INTO WALL OUTLET. TOUGH AND DURABLE, LIGHTED ON/OFF SWITCH FEATURES A SAFETY LOCK TO PREVENT ACCIDENTAL ACTUATION. 120VAC, 15A, UL-LISTED, NON-MAGNETIC SWITCH INCLUDES 8' LONG, GROUNDED POWER CORD (MOUNTING BRACKET AND HARDWARE INCLUDED). TWO-YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Components - Controls
|
REPLACEMENT MECHANICAL ELECTRIC SWITCHES
|
| Push Button Switch 120/230v 30/15a
...plus other(s)
|
REPLACE OR UPGRADE SWITCHES ON YOUR POWER TOOLS OR MACHINERY WITH THESE REPLACEMENT QUALITY MECHANICAL ELECTRIC SWITCHES:
PUSH BUTTON SWITCH - 115/230V, 30A, 60HZ. DESIGNED FOR LARGER MACHINES; MEASURES 4-1/2" X 2-1/2" X 2-1/4". BAT HANDLE TOGGLE SWITCH - 125VAC, 15A, OR 250VAC, 10A; 60HZ. WORKS BEST WITH SMALLER ELECTRIC MOTORS, POWER TOOLS, LIGHT FIXTURES AND INSTRUMENTS. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
STEEL CITY™ STEEL FRAME INDUSTRIAL BANDSAWS OFFER 12" RESAW CAPACITY
|
| 18" Band Saw 2hp 1ph 2 Speed
...plus other(s)
|
STEEL CITY™ INDUSTRIAL BANDSAWS HAVE PLENTY OF POWER FOR EVEN THE TOUGHEST CUTTING OPERATIONS:
MODEL 50250 18" INDUSTRIAL BANDSAW: (SHOWN) 2HP, 230V, 1PH TEFC MOTOR W/MECHANICAL ON/OFF SWITCH - 1,850/3,100 SFPM. 18" BLADE TO FRAME - 10" MAXIMUM RIP RIGHT OF BLADE WITH RIP FENCE, 15-1/2" LEFT. 137" STANDARD BLADE LENGTH, 1-1/4" MAXIMUM WIDTH. 73"H X 39"W X 27"D. 450 LBS. NET WEIGHT; 510 LBS. SHIPPING WEIGHT.
MODEL 50300 20" INDUSTRIAL BANDSAW: 3HP, 230V, 1PH TEFC MOTOR W/MAGNETIC ON/OFF SWITCH - 2,100/3,450 SFPM. 20" BLADE TO FRAME - 11" MAXIMUM RIP RIGHT OF BLADE WITH RIP FENCE, 17-1/2" LEFT. 150" STANDARD BLADE LENGTH, 1-1/4" MAXIMUM WIDTH. 78"H X 40"W X 29"D. 536 LBS. NET WEIGHT; 596 LBS. SHIPPING WEIGHT.
20" X 20" CAST IRON TABLE TILTS 10° LEFT AND 48° RIGHT. 3/4" X 3/8" MITER SLOT. QUICK RELEASE BLADE TENSION LEVER FOR LESS BLADE FATIGUE AND LONGER BLADE LIFE. CAST IRON WHEELS, RESAW POST, 4" DUST PORT, WHEEL BRUSH, ADJUSTABLE BEARING GUIDES, WRENCHES AND INSTRUCTIONS INCLUDED. FIVE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Mortisers
|
MASSIVE WOODTEK® FLOOR MOUNT CHISEL MORTISER ENGINEERED FOR PRODUCTION SHOPS
|
| 1hp Mortiser Floor Standing 230v
...plus other(s)
|
HEAVY DUTY CONSTRUCTION THROUGHOUT ALLOWS THIS WOODTEK® CHISEL MORTISER TO MAKE CLEAN, QUICK MORTISE CUTS UP TO 1" IN SOFTWOODS OR 3/4" IN HARDWOODS - 28" LONG HANDLE WITH RUBBER GRIP FOR LEVERAGE:
COUNTER BALANCED HEAD ENSURES EASIER BORING. DURABLE CAST IRON TABLE FEATURES INTEGRATED FENCE AND ACME THREADED ROD ADJUSTMENT. SINGLE HAND WHEEL CONTROLS LONGITUDINAL AND LATERAL MOVEMENT WHILE A POWERFUL CLAMP SECURES MATERIAL UP TO 10" X 7". ENCLOSED STAND, TABLE INSERT, TOOLS, HARDWARE AND COMPLETE INSTRUCTIONS INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1HP, 230V, 7A, 1PH, 1,720 RPM MOTOR - (8' LONG POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BUSHINGS - 5/8". 3/4", 1-1/8". CAPACITY - 10" X 7" WITH 5" STROKE. TABLE SIZE - 20-1/4" X 6-1/2"; ADJUSTS 16" SIDE TO SIDE AND 3-1/2" IN AND OUT. FENCE SIZE - 20-1/4" X 3-3/4". OVERALL DIMENSIONS - 57-1/2"H X 26-1/2"W X 20-1/2"D OVERALL. NET WEIGHT - 352 LBS. SHIPPING WEIGHT - 442 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HOLLOW MORTISE CHISEL AND BIT SETS - 42-317.
|
|
|
|
Machinery - Sanders
|
PERFORMAX® 22-44 PLUS DRUM SANDER INCLUDES STAND
|
| 22-44 Plus Drum Sander, Open Stand
...plus other(s)
|
WITH THE PERFORMAX® 22-44 PLUS DRUM SANDER (SHOWN WITH OPTIONAL INFEED/OUTFEED TABLES) YOU GET A POWERFUL TOOL WITH ADJUSTABLE DOWNWARD PRESSURE TO MINIMIZE SNIPE:
1-3/4HP, 115V, 20A, 1PH TEFC MOTOR. 1,700 RPM DRUM SPEED (5" DIA. X 22" DRUM) - 0-10 FPM FEED RATE. CAST IRON HEIGHT ADJUSTMENT HAND WHEEL; 1/16" PER TURN ADJUSTMENT. 44" MAXIMUM WIDTH (TWO PASSES), 4" MAXIMUM THICKNESS, 2-1/4" MINIMUM LENGTH, 1/32" MINIMUM THICKNESS. STEEL STAND, ONE 80 GRIT ABRASIVE STRIP, ONE 100 GRIT ABRASIVE CONVEYOR BELT, 4" DUST PORT AND INSTRUCTIONS INCLUDED. 282 LBS. NET WEIGHT; 316 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Table Saws
|
10" OR 12" STEEL CITY™ INDUSTRIAL TABLE SAWS WELL SUITED FOR PRODUCTION FACILITIES
|
| 10" 5hp Industrial Saw 50" F L-t
...plus other(s)
|
LEFT-TILT STEEL CITY™ 10" AND 12" INDUSTRIAL TABLE SAWS OFFER LARGER, MORE POWERFUL MOTORS FOR EXTENDED OPERATIONS AND THE BOX-STYLE TRUNNIONS PREFERRED BY CABINET SHOPS:
10" 35626 5HP MODEL: 230VAC, 15.2A, 1PH; 5/8" DIA. ARBOR. 21-1/2" X 28" CAST IRON TABLE. 3-1/8" MAXIMUM CUT DEPTH @ 90°; 2-1/8" @ 45°. 12-1/4" TABLE IN FRONT OF BLADE. 38"H X 84-1/4"W X 38"D OVERALL. NET WEIGHT 498 LBS.; 536 LBS. SHIPPING WEIGHT. 12" 35638 5HP MODEL: 230VAC, 24.5A, 1PH; 1" DIA. ARBOR. 22" X 29" CAST IRON TABLE. 4" MAXIMUM CUT DEPTH @ 90°; 2-7/8" @ 45°. 12" TABLE IN FRONT OF BLADE. 40"H X 84"W X 36"D OVERALL. NET WEIGHT 526 LBS.; 586 LBS. SHIPPING WEIGHT. 12" 35637 7-1/2HP MODEL: 230/460VAC, 18A, 3PH; 1" DIA. ARBOR. 22" X 29" CAST IRON TABLE. 4" MAXIMUM CUT DEPTH @ 90°; 2-7/8" @ 45°. 12" TABLE IN FRONT OF BLADE. 40"H X 84"W X 36"D OVERALL. NET WEIGHT 526 LBS.; 586 LBS. SHIPPING WEIGHT.
4,200 BLADE RPM. 3,450 RPM BELT-DRIVE TEFC MOTORS; MAGNETIC ON/OFF SWITCH AND OVERLOAD PROTECTION. INDUSTRIAL 50" T-SQUARE FENCE, TWO ADJUSTABLE STEEL LEGS, TWO CAST IRON EXTENSION WINGS, LAMINATED TABLE BOARD, 40T ATB CARBIDE-TIPPED SAWBLADE, SEE-THROUGH BLADE GUARD AND SPLITTER, STANDARD AND DADO INSERTS, MOTOR COVER, 4" DIA. DUST PORT, MITER GAUGE AND INSTRUCTION MANUAL INCLUDED. NOTE: 12" MODELS DO NOT INCLUDE TABLE BOARD AND DADO INSERT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Non-inventory Items/magazine Subscriptions
|
FINE WOODWORKING® AT SPECIAL REDUCED RATES
|
| Fine Ww 1 Year Subscription
...plus other(s)
|
EDITED BY WOODWORKERS WHO WRITE ABOUT REAL PROJECTS, PROVEN CONSTRUCTION TECHNIQUES AND TIME-TESTED WOOD FINISHING METHODS, FINE WOODWORKING® IS THE CHOICE OF BEGINNING AS WELL AS ACCOMPLISHED WOODWORKERS:
ARTICLES REGULARLY COVER JOINERY, TURNING, CARVING, FINISHING, DESIGN, WOOD TECHNOLOGY, MARQUETRY, POWER AND HAND TOOLS AND MORE. INFORMATION IS ACCOMPANIED BY CLEAR, DETAILED ILLUSTRATIONS AND QUALITY PHOTOS. BRING THIS EXPERTISE INTO YOUR SHOP AT SUBSCRIPTION RATES WELL BELOW NEWSSTAND PRICES.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
PROXXON THREE SPEED BENCH DRILL PRESS CAN DRILL HOLES AS SMALL AS 0.02"
|
| Keyed Chuck For Proxon Drill Press
...plus other(s)
|
THE IDEAL MACHINE FOR PRECISE DRILLING, THE PROXXON MODEL 38 128 THREE SPEED BENCH DRILL PRESS CAN CUT THE SMALLEST DIAMETER HOLES WITH EXTREMELY HIGH ACCURACY:
120V MOTOR USES ALUMINUM PULLEYS AND FLAT BELT FOR 1,800, 4,700 AND 8,500 RPM SPINDLE SPEEDS. DIE CAST ALUMINUM WITH HARD CHROMED STEEL COLUMN; ADJUSTABLE FENCE INCLUDES SCALE. 1.25" QUILL DIAMETER WITH RETURN SPRING; CHROME FEED LEVER WITH ADJUSTABLE DEPTH GAUGE. 5.5" THROAT DEPTH; CLAMP LEVER FOR QUICK HEIGHT ADJUSTMENTS. 11"H X 8.7D" X 4.7"W. INCLUDES SIX, TRIPLE SLIT PRECISION COLLETS FOR 0.04" TO 0.125" SHAFTS AND INSTRUCTION MANUAL. 121-610 - OPTIONAL CHUCK, WITH KEY, ACCOMMODATES DRILL BITS UP TO 0.24"; 10,000 RPM MAXIMUM SPEED. GERMANY.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
DEWALT® HEAVY DUTY STAND ACCEPTS ALMOST ANY MITER SAW
|
| Heavy-duty Miter Saw Stand
...plus other(s)
|
THE DEWALT® DW723 MITER SAW STAND HAS A 5-1/2' BEAM THAT EXTENDS TO SUPPORT UP TO 16' OF MATERIAL AND UP TO 400 LBS.:
WORK STOPS/SUPPORTS CAN BE REPOSITIONED QUICKLY ANYWHERE ALONG THE RAIL. QUICK RELEASE, MITER SAW MOUNTING BRACKETS FEATURE NON-MARRING FEET THAT WILL NOT SCRATCH MATERIAL. LIGHTWEIGHT ALUMINUM CONSTRUCTION ALLOWS FOR EASY TRANSPORT; FOLDING LEGS PROVIDE EASY STORAGE. UNIVERSAL DESIGN WORKS WITH VIRTUALLY ALL MITER SAW BRANDS. 35 LBS. NET WEIGHT; 40 LBS. SHIPPING WEIGHT. OPTIONAL DW7231 MITER SAW MOUNTING BRACKETS CAN BE ATTACHED TO A SECOND SAW TO ALLOW YOU TO QUICKLY SWITCH BETWEEN TOOLS (MITER SAWS NOT INCLUDED). ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
DEWALT® 12" COMPOUND MITER SAWS PROVIDE EXTENDED POWER AND DURABILITY
|
| Extension System
...plus other(s)
|
DEWALT® 12" COMPOUND MITER SAWS FEATURE POWERFUL 120VAC, 15A MOTORS TO HELP POWER THEM THROUGH THE TOUGHEST WOOD:
DW715 SINGLE BEVEL COMPOUND MITER SAW - 4,000 RPM: CUTS 2 X 8 LUMBER AT 45° AND 90°. 0-50°, LEFT AND RIGHT, MITER CAPACITY. 0-48°, LEFT, AND 0-3°, RIGHT, BEVEL CAPACITY. COMES WITH DW7080 EXTENSION KIT. 42 LBS. NET WEIGHT; 49 LBS. SHIPPING WEIGHT.
DW716 DOUBLE BEVEL COMPOUND MITER SAW - 3,600 RPM: CUTS 2 X 10 LUMBER AT 90°; 2 X 8 AT 45°. 0-50°, LEFT AND RIGHT, MITER CAPACITY. 0-48°, LEFT AND RIGHT, BEVEL CAPACITY; POSITIVE STOPS AT 0°, 33.9°, 45° AND 48°. 44 LBS. NET WEIGHT; 49 LBS. SHIPPING WEIGHT.
DW718 DOUBLE BEVEL SLIDING COMPOUND MITER SAW - 3,600 RPM: CUTS 1 X 16 LUMBER AT 90°; 1 X 12 AT 45°. 0-60°, LEFT, AND 0-50°, RIGHT, MITER CAPACITY. 0-48°, LEFT AND RIGHT, BEVEL CAPACITY; POSITIVE STOPS AT 0°, 22.5°, 33.9° AND 45°. INCLUDES DW7082 VERTICAL MATERIAL CLAMP. 53 LBS. NET WEIGHT; 57 LBS. SHIPPING WEIGHT.
ALL MITER SAWS FEATURE:
6-1/2" VERTICAL CAPACITY - 5/8" AND 1" ARBORS. TALL, SLIDING FENCES THAT SUPPORT CROWN AND BASE MOLDING WHILE SLIDING EASILY OUT OF THE WAY FOR BEVEL CUTS. ADJUSTABLE STAINLESS STEEL MITER DETENT PLATES WITH POSITIVE STOPS FOR REPEATABLE ACCURACY. BUILT IN HANDLES, CARBIDE SAWBLADES, DUST BAGS, BLADE WRENCHES AND INSTRUCTIONS. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
OPTIONAL DW723 MITER SAW STAND EXTENDS TO SUPPORT UP TO 16' OF MATERIAL WEIGHING UP TO 400 LBS. LIGHTWEIGHT ALUMINUM CONSTRUCTION (35 LBS.) WITH FOLDING LEGS FOR EASY STORAGE. DW7187 ADJUSTABLE MITER SAW LASER SYSTEM (SOLD SEPARATELY) DELIVERS ACCURATE VISIBILITY TO THE CUT LINE. ON/OFF SWITCH ALLOWS OPERATION WITH OR WITHOUT BLADE SPINNING. POWERED BY THE SAW - NO BATTERIES NECESSARY!
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
DEWALT® ADJUSTABLE MITER SAW LASER SYSTEM DOESN'T NEED BATTERIES
|
| Dw7187 Mitersaw Laser Kit
|
POWERED BY THE SAW - NOT BATTERIES - THE DEWALT® DW7187 ADJUSTABLE MITER SAW LASER SYSTEM ALSO HAS AN ON/OFF SWITCH THAT ALLOWS THE LASER TO OPERATE WITH OR WITHOUT THE BLADE SPINNING:
BRIGHT LASER LINE DELIVERS ENHANCED VISIBILITY IN LOW AND HIGH LIGHT CONDITIONS. PROTECTED LASER DIODE IN OPTIMUM LOCATION DELIVERS LONG TERM DURABILITY WHILE KEEPING THE DIODE CLEAR AND VISIBLE. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
HITACHI UNIVERSAL WORKSTATION
|
| Mitersaw Stand
...plus other(s)
|
CONSTRUCTED USING HEAVY DUTY ALUMINUM, THE UU610CZ UNIVERSAL WORKSTATION BEAM CAN SUPPORT UP TO 500 POUNDS:
HOLDS UP TO 12' LONG MATERIAL USING TWO FULLY ADJUSTABLE, 12" WORK SUPPORTS. PATENTED CAM LOCK MOUNT ALLOWS DROP-ON SAW INSTALLATION. DUAL EXTENSION ARMS ACCEPT ROUTER AND VISE ACCESSORIES. INCLUDES FEET FOR INDEPENDENT USE. FOLDS TO 3.75'; WEIGHS 38.5 LBS. SIMILAR UU610 UNIVERSAL WORKSTATION SUPPORTS MATERIAL UP TO 20' LONG. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
