|
|
|
Hand Tools - Scraping & Shaping
|
SMALL PALM PLANE GIVES AMAZING CONTROL
|
| Palm Plane
|
WITH A 1" WIDE BLADE AND A 3-1/4" LONG SOLE, THIS DIMINUTIVE PLANE WORKS IN TIGHT SPACES AS WELL AS ON INTRICATE DETAILS:
TIME TESTED DESIGN FITS FIRMLY IN THE PALM WITH A FINGER RESTING AT THE FRONT OF THE PLANE. ONE PIECE CAST IRON CONSTRUCTION FOR NEAR INDESTRUCTIBILITY; BLADE IS SET USING A SIMPLE THUMBSCREW (FINAL HONING REQUIRED). GERMANY.
|
|
|
|
Hand Tools - Scraping & Shaping
|
STANLEY® HAND PLANES
|
| #60-1/2p L/a Block Plane
...plus other(s)
|
SOME OF THE FINEST QUALITY, YET ECONOMICAL, HAND PLANES ARE PRODUCED BY STANLEY® FOR SMOOTH OPERATION AND PRECISION:
103-151 - #78 RABBET PLANE IS 10" LONG WITH 1-1/2" WIDE CUTTER. ONE PIECE CAST IRON BODY AND HANDLE WITH ALL WORKING SURFACES ACCURATELY MACHINED FOR PRECISE RESULTS. TWO CUTTER POSITIONS: REAR FOR REGULAR WORK AND FORWARD FOR BULL NOSE WORK. REAR CUTTER HAS PRECISE DEPTH ADJUSTMENT. FITTED WITH A SPUR FOR WORK ACROSS WOOD GRAIN, REMOVABLE DEPTH GAUGE AND ADJUSTABLE FENCE THAT CAN BE FITTED ON EITHER SIDE.
103-017 - 6" LOW ANGLE BLOCK PLANE HAS 1-3/8" WIDE CUTTER. GRAY CAST IRON BASE WITH PRECISION GROUND SIDES AND BOTTOM. DURABLE EPOXY COATING FOR LONG LASTING PROTECTION. SHAVING CONTROL PROVIDED BY EXACT DEPTH AND LATERAL CUTTER ADJUSTMENT. QUICK RELEASE CAM LOCK FOR EASY BLADE REMOVAL. MACHINED FINGER GRIPS IN SIDES PROVIDE EASY SINGLE-HANDED USE. 13-1/2° LOW ANGLE CUTTER ENSURES THAT VIBRATION IS KEPT TO A MINIMUM FOR A FINE FINISH. IDEAL FOR PLANING END GRAIN AND PLASTIC MATERIALS.
103-020 - #75 ADJUSTABLE BULL NOSE PLANE IS 4" LONG WITH 1-1/8" WIDE CUTTER. GRAY CAST IRON BODY MACHINED ON BASE AND SIDES. IDEAL LIGHTWEIGHT TOOL FOR TRIMMING REBATES. ADJUSTABLE MOUTH FOR COURSE OR FINE WORK. DESIGNED WITH CUTTER AT FRONT FOR CLOSE WORK INTO CORNERS.
|
|
|
|
Hand Tools - Scraping & Shaping
|
NEED SMALL HAND TOOLS TO FIT SMALL PROJECTS?
|
| Miniature Block Plane
...plus other(s)
|
USING PLANTATION GROWN ROSEWOOD ALONG WITH BRASS FITTINGS, THESE EXQUISITELY SIZED SMALL HAND TOOLS CAN BE USED FOR MODEL MAKING, INSTRUMENT MAKING OR FINE WORK ON ANY PROJECT:
DESIGNED TO THE SAME HIGH STANDARDS AS THEIR LARGER COUNTERPARTS, THESE TOOLS PERFORM EXTREMELY WELL. 952-024, 952-017, 952-010 - PLANES ARE ABOUT 3" LONG. 103-535 - TORPEDO LEVEL IS 4-1/4" LONG. 103-547 - TRY SQUARE HAS A 4" BLADE. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
EASILY SCRAPE WOOD AS SMOOTH AS GLASS
|
| Bow Form Scraper Holder
|
USING THE BOW-FORM™ CONCAVE SCRAPER HOLDER, AND ITS ENCLOSED SCRAPER BLADE, YOU CAN SET UP GENTLE BOWS FOR PRECISE, CONSISTENT AND SMOOTH WOOD SCRAPING:
7-1/2"W X 2"H X 1-3/8"D ANODIZED ALUMINUM BODY WITH KNURLED BRASS ADJUSTING SCREW - HANDLES SCRAPERS UP TO 1/16" THICK. NO TECHNIQUES TO LEARN, NO BURNED FINGERS AND NO TIRED HANDS. CAN BE USED WITH ALMOST ANY SCRAPER. USA.
|
|
|
|
Hand Tools - Scraping & Shaping
|
2-IN-1 TOOL TRIMS EDGES AND ROUNDS CORNERS
|
| 2 In 1 Cornering Tool
|
ONE OF THE HANDIEST AND QUICKEST WAYS TO SOFTEN EDGES, THE 2-IN-1 CORNERING TOOL WILL EASILY FIT INTO YOUR HAND:
THE HEAD OF THE 5" LONG TOOL IS MOLDED AT THE CORRECT ANGLE SO THE TRIM BLADE CAN CUT PERFECT CHAMFERS. THE RADIUS EDGE CUTTER PROVIDES SMOOTH 1/16" OR 1/8" ROUNDED EDGES WITH A SIMPLE PULL OR PUSH. DURABLE PLASTIC HANDLE WITH HANGING HOLE - THUMBSCREW HOLDS THE TRIM BLADE OR RADIUS EDGE CUTTER IN PLACE DURING USE. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
PROFESSIONAL SCRAPING PERFORMANCE WITH A SOFT GRIP HANDLE
|
| 2-1/2" 4 Edge Soft Grip Scraper
...plus other(s)
|
SOFT GRIP SANTOPRENE®, DOUBLED MOLDED OVER A SOLID CORE HANDLE, MEANS THESE SCRAPERS HELP REDUCE FATIGUE AND BLISTERS:
FOUR EDGE, CAMBER GROUND BLADE CUTS THROUGH CAKED ON PAINT LIKE A HOT KNIFE THROUGH BUTTER. CHOOSE FROM THREE SCRAPER BLADE WIDTHS. 110-285 - 2-1/2"W SCRAPER HAS A BLADE FILE STORED IN THE HANDLE FOR RESHARPENING. USA.
|
|
|
|
Hand Tools - Scraping & Shaping
|
SIX DOUBLE EDGED BLADES PROVIDE 12 EFFECTIVE SCRAPING PROFILES
|
| Contour Scraper
|
THE ALLWAY CS6 CONTOUR SCRAPER HAS AN ERGONOMICALLY CORRECT, SOFT GRIP HANDLE FOR LESS FATIGUE AND INTERCHANGEABLE BLADES TO MEET MOST REQUIREMENTS:
EACH HEAT TREATED, CUTLERY STAINLESS STEEL BLADE HAS TWO DIFFERENT EDGES TO MAKE SCRAPING MOLDING, FURNITURE AND MILLWORK EASIER. SCRAPER HOLDS BLADES AT CORRECT ANGLE FOR SCRAPING WITH NO CHATTER. HALF ROUND FILE STORES IN HANDLE FOR QUICK TOUCH UPS WHEN BLADES NEED SHARPENING. HANDLE IS ABOUT 7-3/4" LONG. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ENGLISH PATTERN DRAWKNIVES FOR OLD WORLD FINISHING
|
| Bent Draw Knife 11"x1-5/8"
...plus other(s)
|
CROWN TOOLS' ENGLISH PATTERN DRAWKNIVES ARE MANUFACTURED FROM CAREFULLY HARDENED AND TEMPERED HIGH CARBON STEEL:
BOTH FEATURE 10" LONG BLADES WITH BEECH HANDLES AND BRASS FERRULES. 113-057 - MODEL DKB HAS HANDLES IN LINE WITH THE BACK OF THE BLADE FOR GREATER CONTROL AND A SLIGHT CURVE TO SPEED STOCK REMOVAL. 119-663 - MODEL DK IS A STRAIGHT-BLADED OR LONDON PATTERN CARPENTER'S DRAWKNIFE WITH HANDLES FIXED AT 90° TO THE EDGE. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
QUALITY RALI® SWISS HAND PLANES NEVER NEED SHARPENING
|
| Resharpenable Blade For 260l
...plus other(s)
|
|
|
|
Hand Tools - Scraping & Shaping
|
RAZOR SHARP HARDENED STAINLESS STEEL TOOLS CUT SMOOTH AND FAST
|
| Large Round Rasp W/handle
...plus other(s)
|
THE EXCLUSIVE MICROPLANE® HAND TOOL MANUFACTURING PROCESS CREATES EXTREMELY SHARP AND DURABLE TEETH FOR FAST, SMOOTH, LOW EFFORT CUTTING IN ALL TYPES OF WOOD - PATENTED CUTTERS PRODUCE SHAVINGS INSTEAD OF SAWDUST, LEAVING A FINISH THAT ONLY REQUIRES MINIMAL SANDING. SQUARE AND ROUND RASPS COME IN THREE SIZES AND INCLUDE HANDLES. SPECIALTY PRODUCTS INCLUDE:
STANDARD SERIES RASP COMES IN LARGE OR SMALL AND ROUND OR SQUARE SHAPE AND INCLUDES HANDLE. SNAP-IN RASP FEATURES AN INTERCHANGEABLE, REVERSIBLE 1" X 8" COARSE FLAT BLADE. REPLACEMENT FLAT, ROUND OR ANGLED BLADES EASILY SNAP INTO THE COMFORTABLE OFFSET HANDLE. 1" AND 2" ROTARY SHAPERS USE REPLACEABLE BLADES IN A 1/4" DIA. SHANK MOUNTED DESIGN FOR DRILL PRESS USE (2,500 RPM MAX. SPEED). ROTARY SHAPER FOLLOWER KIT WILL MOUNT ONTO THE BASE OF EITHER SHAPER FOR USE WITH TEMPLATES TO DUPLICATE CONTOURS. 12" FLEXIBLE, RIGID AND HALF ROUND BLADES PLUS 2-IN-1 BLADES CAN BE MOUNTED INTO STANDARD HACKSAW FRAMES. 10" AND 5-1/2" FLAT BLADES REPLACE STANDARD SURFORM® PLANE BLADES. USA.
|
|
|
|
Hand Tools - Scraping & Shaping
|
CLIFTON PLANES ARE ACCURATE, SMOOTHLY FUNCTIONING TOOLS FOR CABINET MAKERS AND DISCERNING WOODWORKERS
|
| #3 Clifton Bench Plane 1-3/4" Blde
...plus other(s)
|
CLIFTON PLANES FEATURE HAND FORGED 1/8" THICK HIGH CARBON STEEL BLADES WITH TWO-PIECE CAP IRONS, FULLY GROUND SIDES AND SOLES AND POLISHED BUBINGA HARDWOOD KNOBS AND HANDLES. THEY ALSO HAVE STAINLESS STEEL ADJUSTING LEVERS AND COMPONENTS AND ACCURATELY MACHINED GRAY CAST IRON BODIES AND FROGS (FROG MECHANISMS USE FULLY MACHINED "BEDROCK" DESIGN FOR RIGIDITY; DESIGN MEANS MOUTH WIDTH CAN BE ADJUSTED WITHOUT CHANGING THE BLADE SETTING):
116-780, 116-783 - #3 AND #4 BENCH PLANES ARE 9-3/4"L. 143-102 - #4-1/2 SMOOTH PLANE IS 10-1/2"L. 116-786 - #5 BENCH PLANE IS 14"L. 143-105 - #5-1/2 JACK PLANE IS 15"L. 116-789 - #6 BENCH PLANE IS 18"L. 116-792 - #7 BENCH PLANE IS 22-1/4"L. 116-807 - THE 3-IN-1, CLIFTON 3110 PLANE COMBINES THE FEATURES OF SHOULDER, CHISEL AND BULL NOSE PLANES. AS A SHOULDER PLANE, A FRONT EXTENSION PIECE IS ATTACHED. AS A CHISEL PLANE, ALL NOSE PIECES ARE REMOVED. AS A BULL NOSE PLANE, THE THINNER NOSE PIECE IS FITTED WITH ONE OR BOTH 1/32" AND 1/64" PRECISION MACHINED STEEL SHIMS. 6"L. 1-1/8" BLADE. 2 LBS. 116-813 - THE CLIFTON 420 SHOULDER RABBET PLANE FILLS THE NEED FOR A LIGHT, ACCURATE SHOULDER PLANE. 8"L. 3/4" BLADE. 2.5 LBS. 116-819 - MODEL 410 IS A NARROW, LIGHT AND ACCURATE SHOULDER PLANE. 5-1/2"L. 11/16" BLADE. 1-1/4 LBS.
NOTE: COMBINATION AND SHOULDER RABBET PLANES ARE MACHINED USING MANY OF THE SAME QUALITY MATERIALS AS THE BENCH PLANES; ADJUSTMENTS ARE GENERALLY MADE USING A SET SCREW.
116-825 - MODEL 400 IS A DELICATE PLANE FOR PRECISION WORK. BLADE ADJUSTED AND HELD IN PLACE WITH A ROSEWOOD WEDGE. 3-1/8"L. 3/8" BLADE. 810-173, 810-180 - CLIFTON 2 PIECE CAP IRONS IMPROVE THE PERFORMANCE OF STANDARD BENCH PLANES BY FITTING TIGHTER AND REDUCING CLOGGING IN THE MOUTH. 810-173, 810-180 - CLIFTON 2 PIECE CAP IRONS IMPROVE THE PERFORMANCE OF STANDARD BENCH PLANES BY FITTING TIGHTER AND REDUCING CLOGGING IN THE MOUTH. 810-173 FITS #4 AND #5 BENCH PLANES; 810-180 FITS #6 AND #7. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ECONOMICAL ROUND RASP MAKES WOOD SHAPING EASY
|
| Round Rasp W/ Handle
|
YOU CAN QUICKLY REMOVE WOOD OR ENLARGE HOLES WITH THIS HOLLOW ROUND RASP:
SERRATED STEEL BLADE IS 5/8" DIA. X 9-1/4"L - 14" OVERALL. WEIGHS 3-1/2 OZ. IMPORTED.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hand Tools - Scraping & Shaping
|
CORNERING TOOLS GENTLY SOFTEN AND ROUND OVER EDGES
|
| Cornering Tool Set
|
IF YOU'VE EVER TRIED TO FIT FLUSH DOORS OR SHUTTERS, YOU KNOW THAT 90° EDGES NEED TO BE "SOFTENED" (SLIGHTLY ROUNDED, BUT NOT BEVELED) FOR A PROPER FIT. WOODWORKER'S SUPPLY® TWO-PIECE CORNERING TOOL SET CAN SOFTEN THOSE EDGES SO THAT NOT ONLY IS THE FIT RIGHT, BUT FINISH OR PAINT WILL NOT CHIP OFF:
ROUND EDGES TO 1/16", 1/8", 3/16" OR 1/4" RADII. USE ONE SIZE SMALLER TOOL TO "BREAK" THE EDGE AND FOLLOW WITH THE FINISHING SIZE. 5-3/4" LONG HARDENED TOOL STEEL - NICKEL PLATED. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
FIVE PIECE RASP SET SHAPES, PLANES AND CONTOURS
|
| 5 Pc Steel Rasp Set
|
FIVE PIECE RASP SET INCLUDES SHAPES TO REMOVE WOOD FROM ANY FLAT OR CONTOURED SURFACE YOUR PROJECT MIGHT HAVE:
HARDENED ALLOY STEEL - CONCAVE, CONVEX, FLAT, TRIANGULAR AND ROUND RASPS. 5" OVERALL LENGTH; EACH HAS A 2" CUTTING LENGTH - WIDTH VARIES WITH SHAPE. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
FOOTPRINT TOOLS HAND PLANES MANUFACTURED UNDER STRINGENT QUALITY ASSURANCE STANDARDS
|
| 7"x1-5/8" #220b Block Plane
...plus other(s)
|
MADE USING SHEFFIELD STEEL BLADES, FOOTPRINT TOOLS HAND PLANES OFFER HIGH QUALITY AT A REASONABLE PRICE:
124-703 - 220B BLOCK PLANE IS IDEAL FOR END GRAIN OR SMALL-SCALE PLANNING - 7"L X 1-5/8"W, WEIGHS 1-3/4 LBS. 124-706 - 4B SMOOTH PLANE DESIGNED FOR GENERAL PURPOSE PLANNING; OFTEN USED AFTER JACK PLANE FOR FINAL FINISHING - 9-3/4"L X 2"W, WEIGHS 4-1/4 LBS. 124-709 - 5B JACK PLANE REMOVES HEAVY MATERIAL AND SQUARES ROUGH TIMBER - 14"L X 2"W, WEIGHS 5 LBS. ALL FEATURE HIGH CARBON SHEFFIELD STEEL BLADES - BLOCK PLANE HAS PLASTIC HANDLE; SMOOTH AND JACK PLANE HANDLES ARE BEECH. GRAY CAST IRON BODIES, FROGS AND LEVER CAPS AND MACHINE-GROUND BASES. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
NICHOLSON® AMERICAN PATTERN 10" RASPS
|
| #49 Second Cut Nicholson Rasp
...plus other(s)
|
NICHOLSON® 10" AMERICAN PATTERN RASPS ARE IDEAL FOR AGGRESSIVE STOCK REMOVAL:
124-829, 124-832 - PATTERN MAKER'S CABINET RASPS FEATURE A NARROW PATTERN WITH CUT EDGES AND HALF-ROUND SHAPE. MODEL #49 IS A SECOND CUT FOR AGGRESSIVE STOCK REMOVAL. #50 IS A SMOOTH CUT FOR FAST CUTTING, BUT LEAVES A SMOOTH FINISH. EACH WEIGHS ABOUT 5 OZ. AND ACCEPTS OPTIONAL HANDLES. 124-835 - 4-IN-HAND® RASP (FORMERLY SHOE RASP) HAS SEPARATE FILE AND RASP SECTIONS ON FLAT AND HALF-ROUND SIDES - A GOOD CHOICE FOR WOODWORKERS, HOMEOWNERS OR BOAT BUILDERS. WEIGHS 10 OZ. USE WITHOUT HANDLE. 124-874 - FILE HANDLE USES INTERCHANGEABLE CUSHION INSERTS DESIGNED TO HOLD MOST POPULAR FILES AND RASPS. RUBBER COATED, EGONOMIC HANDLE HAS REAR TAPER, WIDE MIDDLE AND FLARED NECK TO INCREASE PUSH FORCE.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ANANT® RABBET PLANE REPRESENTS A SOLID VALUE
|
| A-10 Bench Plane
|
THE ANANT® MODEL A-10 RABBET PLANE CAN PROVIDE MANY YEARS OF QUALITY SERVICE FOR A PRICE THAT IS A FRACTION OF OTHER HAND PLANES:
CAST IRON BODY ENSURES STRENGTH AND RIGIDITY. MACHINED LEVER CAP FIRMLY HOLDS IRON CAP AND IRON IN PLACE WITH SCREWS TO HELP PREVENT CHATTERING. HIGH CARBON STEEL BLADE IS HARDENED AND TEMPERED FOR ACCURACY AND UNIFORMITY - LATERAL ADJUSTING LEVER SETS EVENNESS OF CUT. HARDWOOD HANDLE AND KNOB WITH KNURLED BRASS ADJUSTING NUT. 12-7/8"L X 2-1/8"W X 5-3/8"H, WEIGHS 4 LBS., 5 OZ.. ONCE PROPERLY TUNED, THIS HAND PLANE CAN EASILY EXCEED YOUR EXPECTATIONS IN ALMOST EVERY WAY. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
HANDCRAFTED WOODWORKING PLANES FASHIONED FROM SOLID BLOCKS OF ROSEWOOD
|
| Block Plane 5"-rosewood
...plus other(s)
|
DURABLE ASIAN ROSEWOOD GIVES THESE HANDCRAFTED WOODWORKING PLANES THEIR DISTINCTIVE APPEARANCE:
DESIGNED TO BE USED ON THE "PULL" RATHER THAN THE "PUSH" STROKE (RABBET PLANE CAN BE USED IN EITHER DIRECTION). CARBON STEEL IRONS SECURED WITH WEDGES (USE HAMMER TO ADJUST) - SOLES INCLUDE A BRASS INSERT AT THE MOUTH TO REDUCE WEAR. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
GLEN-DRAKE PLANE HAMMER #2 - 131-759.
|
|
|
|
Hand Tools - Scraping & Shaping
|
EUROPEAN STYLE WOODWORKING PLANES HANDCARVED FROM SOLID HARDWOOD
|
| 9-3/4" Euro Smoothing Plane
...plus other(s)
|
DURABLE ASIAN ROSEWOOD HAS BEEN USED TO GIVE THESE UNIQUE EUROPEAN STYLE WOODWORKING PLANES THEIR DISTINCTIVE APPEARANCE:
EURO SMOOTHING PLANES INCLUDE A CHIPBREAKER AND CARBON STEEL IRON SECURED WITH A WEDGE (USE HAMMER TO ADJUST). JACK/SMOOTH PLANE FEATURES A CARBON STEEL IRON WITH WEDGE. RABBET PLANE HAS AN ADJUSTABLE NOSEPIECE AND CARBON STEEL IRON WITH WEDGE. CONTOUR PLANES HAVE CARBON STEEL BLADES WITH NO WEDGES - USE IS SIMILAR TO A SMALL SPOKESHAVE. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
DRAW KNIFE SHAVES WOOD AS SMOOTH AS GLASS
|
| 9-1/2"x1" Drawknife
|
THE HOLLOW-BACKED, GENTLY CURVED CUTTING EDGE ON THIS FISCH™ PRECISION TOOLS' DRAW KNIFE YIELDS MORE CONTROL AND PRODUCES FINER SLICES THAN A STRAIGHT EDGE:
MODEL 3360-03N DRAW KNIFE HAS A 9-1/2" X 1" CUTTING EDGE. BLADES ARE HIGH CARBON STEEL, WITH HARDWOOD HANDLES, OFFSET BELOW THE CUTTING EDGE. AUSTRIA.
|
|
|
|
Advanced Search Tools
Browse
