|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
BLUM® AVENTOS HF BIFOLD LIFT SYSTEM PROVIDES EFFORTLESS OPENING AND SMOOTH, SILENT CLOSING FOR OVERHEAD CABINET DOORS
|
| Aventos Hf Mechanism 85-470pf
...plus other(s)
|
SPECIFICALLY DESIGNED FOR TOP-HINGED, BI-FOLD OVERHEAD CABINET DOORS, THE UNIQUE BLUM® AVENTOS HF BI-FOLD LIFT SYSTEM MAKES EVEN A HEAVY DOOR FEEL WEIGHTLESS. THE DOOR CAN BE OPENED EASILY OR LEFT AT ANY HEIGHT; RELEASE THE DOOR AND THE SOFT-CLOSING BLUMOTION MECHANISM LETS IT DOWN SMOOTHLY AND GENTLY:
SYSTEM WORKS WITH ALL COMMON DOOR WIDTHS AND HEIGHTS BY USING COMBINATIONS OF ONE, TWO OR THREE LIFT MECHANISMS AND ASSOCIATED TELESCOPIC ARMS. ASSEMBLES QUICKLY USING CLIP TECHNOLOGY - DOORS CAN LATER BE REMOVED AND REATTACHED WITHOUT TOOLS. SETTING PROPER TENSION FOR OPENING AND CLOSING POWER IS QUICK AND PRECISE. CABINET DOORS ADJUST IN ALL 3 DIMENSIONS. WORKS WITH WOOD OR ALUMINUM FRAME DOORS IN FACE FRAME OR FRAMELESS APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. IT IS RECOMMENDED THAT YOU REFER TO THE AVENTOS HF™ BROCHURE PRIOR TO STARTING INSTALLATION. REQUEST A COPY FROM YOUR SALES REPRESENTATIVE OR VIEW THE .PDF VERSION OF THE BROCHURE BELOW.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
AVENTOS HK STAY LIFT SYSTEM FOR FRAME OR FRAMELESS CONSTRUCTION BRINGS SOFT CLOSING TO WALL OR ACCENT CABINETS
|
| Aventos Hk Lift 43-99pf
...plus other(s)
|
WITH THE UNIQUE BLUM® AVENTOS HK STAY LIFT SYSTEM THE DOOR FRONT LIFTS UP EASILY, REMAINS IN ANY POSITION AND CLOSES SILENTLY USING THE INTEGRATED BLUMOTION MECHANISM - IDEAL FOR APPLICATIONS ABOVE REFRIGERATORS, ACCENT CABINETS OR WALL CABINETS:
WORKS WITH CABINETS UP TO 48" WIDE AND 9-7/16" TO 24" HIGH; CLEARS CROWN MOLDING UP TO 4" HIGH. TO CHOOSE THE CORRECT LIFT MECHANISM, YOU NEED TO DETERMINE THE CORRECT "POWER FACTOR" (PF). MULTIPLY YOUR CABINET DOOR HEIGHT IN INCHES X THE DOOR WEIGHT IN POUNDS (INCLUDING TWICE THE HANDLE WEIGHT), E.G., IF THE RESULTING "PF" IS BETWEEN 100 AND 174, YOU WOULD SELECT MECHANISM 20K2500.NA. MECHANISM SETS COME WITH TWO LIFT ARMS, RIGHT AND LEFT COVER PLATES, TWO COVER CAPS AND WOOD SCREWS AND ASSEMBLE QUICKLY USING CLIP TECHNOLOGY. WOOD/WIDE ALUMINUM DOOR HARDWARE SET IS REQUIRED TO FASTEN YOUR CABINET DOOR ONTO THE LIFT ARMS. INCLUDES FOUR MOUNTING PLATES (TWO WITH BRACKETS), MOUNTING SCREWS AND #2X2 POZI DRIVER BIT FOR ADJUSTING TENSION. OPTIONAL REDUCTION CLIP KEEPS LIFT MECHANISM FROM OPENING ITS FULL 107°. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. IT IS RECOMMENDED THAT YOU REFER TO THE AVENTOS HK™ BROCHURE PRIOR TO STARTING INSTALLATION. VIEW THE .PDF VERSION OF THE BROCHURE BELOW.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
HANDS FULL? BLUM® TIP-ONTM CREATES DOORS THAT OPEN WITH A SIMPLE TOUCH
|
| Tip-on For Doors-standard
...plus other(s)
|
|
DESIGNED FOR USE WITH BLUM FREE SWING HINGES, TIP-ON FOR DOORS GIVES SIMPLE HANDS FREE OPENING OF DOORS WITH OR WITHOUT PULLS. A PUSH ON THE DOOR FRONT OPENS THE DOOR. A MAGNETIC CATCH SECURES THE DOOR WHEN CLOSED. TIP-ON CYLINDERS CAN BE BORED DIRECTLY INTO A FRAMELESS CABINET SIDE OR MOUNTED WITH EITHER WING STYLE OR IN LINE ADJUSTABLE ADAPTER PLATES. CYLINDER KITS INCLUDE BOTH A SCREW-ON STRIKE PLATE AND A PSA PLATE.>/LI> USE STANDARD TIP-ON FOR DOORS UNDER 48" IN HEIGHT. USE EXTENDED TIP-ON FOR DOORS OVER 48" IN HEIGHT OR FOR VERY HEAVY DOORS. DUE TO VARIOUS DOOR WEIGHTS AND SIZES, A TRIAL APPLICATION IS SUGGESTED. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
BLUM® AVENTOS HL PARALLEL LIFT SYSTEM PROVIDES EFFORTLESS OPENING AND SMOOTH, SILENT CLOSING FOR UPPER CABINET DOORS
|
| Aventos Hl Lift 20l2100.na
...plus other(s)
|
DESIGNED FOR DOORS THAT OPEN UP AND PARALLEL TO THE CABINET FACE, THE BLUM® AVENTOS HL CAN BE USED IN A WIDE VARIETY OF APPLICATIONS INCLUDING WALL CABINETS AND COUNTER TOP APPLIANCE GARAGES. SMOOTH OPENING AND SOFT CLOSING WITH THE INCORPORATED BLUMOTION&3153;.
SYSTEM COVERS ALL COMMON DOOR WIDTHS AND HEIGHTS USING FIVE DIFFERENT LIFT MECHANISMS AND 4 ARM ASSEMBLIES. SUITABLE FOR CABINET WIDTHS UP TO 48 AND FOR CABINET HEIGHTS FROM 11-7/8 TO 22-3/4. WORKS WITH EITHER FACE FRAME OR FRAMELESS CABINET DESIGNS. QUICK AND EASY ASSEMBLY AND REMOVAL WITH CLIP TECHNOLOGY. COMPONENTS SNAP TOGETHER AND LOCK IN PLACE. SIMPLE 3-WAY ADJUSTMENT OF DOORS TO ASSURE PERFECT FIT. INTEGRATED TENSION ADJUSTMENT WITH CALIBRATED SCALE TO COMPENSATE FOR DOOR WEIGHT. A CROSS STABILIZER BAR CAN BE INCORPORATED INTO WIDE DOOR APPLICATIONS TO ASSURE SMOOTH OPERATION. SYSTEM INCLUDES A SPECIAL ARM ASSEMBLY, 20L3900 FOR APPLIANCE GARAGE APPLICATIONS IN EITHER FACE FRAME OR FRAMELESS CABINETS. IT IS RECOMMENDED THAT YOU REFER TO THE AVENTOS HL BROCHURE PRIOR TO STARTING INSTALLATION. VIEW THE .PDF VERSION OF THE BROCHURE BELOW.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
BLUM® AVENTOS HS UP AND OVER LIFT SYSTEM PROVIDES EFFORTLESS OPENING AND SILENT CLOSING FOR UPPER CABINET DOORS.
|
| Aventos Hs 'a' Lift 14-20"
...plus other(s)
|
DESIGNED FOR DOORS THAT OPEN UP AND OVER THE TOP OF UPPER CABINETS. BLUM® AVENTOS HS™ PROVIDES SMOOTH OPENING AND INTEGRATED BLUMOTION™ SOFT, SILENT CLOSING FOR TOP HINGED WALL CABINET DOORS.
SYSTEM COVERS ALL COMMON DOOR WIDTHS AND HEIGHTS USING NINE DIFFERENT LIFT MECHANISMS AND A SINGLE ARM ASSEMBLY. SUITABLE FOR CABINET WIDTHS UP TO 48 AND FOR CABINET HEIGHTS FROM 13-3/4 TO 32. WORKS WITH EITHER FACE FRAME OR FRAMELESS CABINET DESIGNS. QUICK AND EASY ASSEMBLY AND REMOVAL WITH CLIP TECHNOLOGY. COMPONENTS SNAP TOGETHER AND LOCK IN PLACE. SIMPLE 3-WAY ADJUSTMENT OF DOORS TO ASSURE PERFECT FIT. INTEGRATED TENSION ADJUSTMENT ALLOWS FINE TUNING FOR VARIABLE DOOR WEIGHT. A CUT-TO-LENGTH CROSS STABILIZER ROD AND HINGE KIT ARE REQUIRED FOR ALL APPLICATIONS. IT IS SUGGESTED THAT YOU READ THE AVENTOS HS™ BROCHURE PRIOR TO BEGINNING INSTALLATION. (REQUEST ONE FROM YOUR PHONE SALES REPRESENTATIVE OR VIEW THE .PDF VERSION BELOW.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
FLAP SUPPORT FEATURES SOFT CLOSING ACTION
|
| Soft Down Flap Stay
|
FLAP SUPPORT UTILIZES SPRING-LOADED DAMPING ACTION TO PROVIDE SOFT OPENING AND CLOSING FOR DROP OPEN FLAPS:
ONE SUPPORT WILL HANDLE A 25/32" DOOR UP TO 24" X 24". USE TWO SUPPORTS ON LARGER FLAPS. PLASTIC HOUSING WITH NICKEL PLATED STEEL ARM. WORK WITH BUTT OR EURO STYLE HINGES (MOUNTING SCREWS AND INSTRUCTIONS INCLUDED).
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
LID STAY PROVIDES SOFT CLOSING FOR CHESTS
|
| Soft Down Lid Stay
|
LID STAY UTILIZES SPRING-LOADED DAMPING ACTION TO PROVIDE SOFT CLOSING FOR LIDS:
ONE STAY WILL HANDLE A 25/32" THICK LID UP TO APPROXIMATELY 24" X 24" - USE TWO ON LARGER SIZES. PLASTIC HOUSING WITH NICKEL-PLATED STEEL ARM (MOUNTING SCREWS AND INSTRUCTIONS INCLUDED). USE ONLY WITH BUTT OR CONTINUOUS (PIANO) HINGES.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
OVERHEAD DOOR SUPPORT WITH SOFT CLOSING FEATURE
|
| Soft Down Door Stay
|
OVERHEAD DOOR SUPPORT UTILIZES SPRING-LOADED DAMPING ACTION TO PROVIDE SOFT CLOSING FOR OVERHEAD DOORS:
ONE SUPPORT WILL HANDLE A 25/32" DOOR UP TO 24" X 24". USE TWO SUPPORTS ON LARGER DOORS. PLASTIC HOUSING WITH NICKEL PLATED STEEL ARM. WORK WITH BUTT OR EURO STYLE HINGES (MOUNTING SCREWS AND INSTRUCTIONS INCLUDED).
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
THE ONE LID STAY THAT IS CONVERTIBLE, REVERSIBLE, ADJUSTABLE AND DEMOUNTABLE
|
| Convertible Lid Stay
|
STRONG, DIE CAST NICKEL PLATED DELTA CONVERTIBLE LID STAYS STOP THE LID AT INTERMEDIATE POSITIONS AND ALLOW YOU TO PRECISELY ADJUST THE BRAKING POWER:
8"L STAY SUPPORTS LIDS UP TO 20 LBS. ALL HOLES FIT 32MM CENTERS AND CAN BE PLACED 27MM OR 32MM FROM THE EDGE. SIMPLY FASTEN THE BRACKETS TO THE CABINET, THEN SNAP THE SUPPORT INTO PLACE. TENSION CAN BE REVERSED TO SUIT LIFT-UP OR DROP-DOWN FUNCTIONS. OPENING ANGLE ADJUSTS FROM 75° TO 90° BY BRACKET RELOCATION. INSTRUCTIONS INCLUDED (MOUNTING SCREWS NOT INCLUDED).
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
STURDY, LOCKING LID SUPPORT IS PERFECT FOR DRAFTING TABLES OR SIMILAR APPLICATIONS
|
| Hd Locking Lid Support
|
LOCKING LID SUPPORT HAS KNURLED KNOB THAT LOCKS THE SLIDE TO SUPPORT LIDS, WINDOWS OR TABLES AT ANY ANGLE:
10" LONG ARM. STRONG STEEL CONSTRUCTION WITH BRASS FINISH (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
SPRING LOADED LID SUPPORTS HAVE CONSUMER PRODUCT SAFETY COMMISSION (CPSC) ENDORSEMENT
|
| Rh L/sup (blue) 35 To 40
...plus other(s)
|
SPECIFICALLY CITED BY THE CPSC FOR PROTECTING CHILDREN FROM INJURIES OR DEATH CAUSED BY FALLING LIDS ON TOY CHESTS, TRUNKS, WOODEN STORAGE CHESTS OR SIMILAR ITEMS, CARLSON CAPITOL LID SUPPORTS WON'T LET LIDS FALL - PERIOD! WHEN PROPERLY INSTALLED, THESE SPRING LOADED SUPPORTS PROVIDE THE PROPER TORQUE TO ENSURE THAT A HINGED LID STAYS OPEN IN THE POSITION TO WHICH IT WAS RAISED:
TO DETERMINE SUPPORTS REQUIRED FOR YOUR APPLICATION, MULTIPLY ONE-HALF THE DISTANCE - IN INCHES - FROM THE FRONT TO THE BACK OF THE LID TIMES THE WEIGHT OF THE LID - IN POUNDS:
EXAMPLE: 1/2 OF A 20"D LID IS 10" - MULTIPLY 10" X THE 9 LB. WEIGHT OF THE LID TO GET 90 IN./LBS. TORQUE. THIS MEANS A LEFT HAND (100-039), RIGHT HAND (100-038) OR CENTER MOUNT (905-711) 65-95 IN./LBS. TORQUE LID SUPPORT SHOULD BE SUFFICIENT.
WHEN USING TWO SUPPORTS, DIVIDE THE TORQUE NUMBER IN HALF:
EXAMPLE: THE SAME 90 IN./LBS. LID WOULD REQUIRE LEFT HAND (100-033) AND RIGHT HAND (100-032) 40-45 IN./LBS. TORQUE LID SUPPORTS.
LEFT HAND, RIGHT HAND OR CENTER MOUNT SUPPORTS AVAILABLE (SCREWS NOT INCLUDED). ALL MOUNTING DIMENSIONS ARE MEASURED FROM THE CENTER OF THE HINGE PIN. NOTE: AS INDICATED BELOW, SPRINGS ARE COLOR CODED TO MATCH CAPACITIES. HOWEVER, ALL LID SUPPORTS FEATURE AN ANTIQUE COPPER EXTERIOR FINISH. USA.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
SPRING-LOADED FRICTION STAY LOCKS OPEN AT ANY HEIGHT
|
| Friction Stay 6" Wide
|
SPRING OPERATED DISCS ON THIS 6" FRICTION STAY DAMPEN MOVEMENT FOR SMOOTH, CONSISTENT ACTION, EVEN WHEN THE LID IS CLOSING:
STURDY STEEL HARDWARE WITH BRONZED FINISH. SOLD IN HANDED PAIRS (SCREWS INCLUDED).
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
FRICTION LID SUPPORT REVERSES TO MOUNT ON EITHER SIDE
|
| Straight Lid Support
|
REVERSIBLE FOR RIGHT OR LEFT HAND APPLICATION, THE STRAIGHT FRICTION LID SUPPORT IS MADE FROM BRASS PLATED STEEL:
6-1/4" ARM LENGTH (MOUNTING SCREWS INCLUDED). IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
CRESCENT FRICTION LID SUPPORTS
|
| R.h.crescent Lid Support
...plus other(s)
|
DESIGNED FOR SHALLOW CABINETS WHERE A STRAIGHT SUPPORT MIGHT BE TOO LONG, CRESCENT FRICTION LID SUPPORTS ARE MADE FROM BRASS PLATED STEEL:
5" ARM LENGTH (MOUNTING SCREWS INCLUDED). SUPPORTS ARE NOT REVERSIBLE. IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
SOLID BRASS LID SUPPORT
|
| R.h. Brass Lid Support
...plus other(s)
|
|
SOLID BRASS LID SUPPORT PROVIDES CLASSIC LOOKS AND FUNCTIONAL SUPPORT. NON-REVERSIBLE. 9-1/2"L X 3/8"W X 1/8"T. SCREWS INCLUDED.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
OVERHEAD DOOR SUPPORT IS REVERSIBLE FOR RIGHT OR LEFT HAND APPLICATIONS
|
| Overhead Door Support
|
THE INTERNAL GRIP MECHANISM ON THE OVERHEAD DOOR SUPPORT AUTOMATICALLY SUPPORTS A DOOR AT 75° AND EASILY RELEASES WITH A SLIGHT LIFT:
NICKEL PLATED STEEL. 9-7/8" OVERALL (SCREWS INCLUDED).
LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
SOLID BRASS STAY LOCKS DOORS IN PLACE
|
| Lockable Door Stay
|
HEAVY BRASS LOCKABLE DOOR STAY WILL KEEP A DOOR OR LID FROM SLAMMING SHUT AND IS POLISHED AND LACQUERED FOR A GREAT APPEARANCE:
THUMBSCREW ADJUSTMENT KNOB CONTROLS DOOR MOVEMENT. 9-1/2 OAL; 8" TRAVEL (SCREWS INCLUDED). IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
CHAIN STAY IS DECORATIVE AND FUNCTIONAL
|
| Decorative Door Chain
|
|
BRASS PLATED CHAIN STAY WITH TWO MOUNTING PLATES MAKE THIS A BEAUTIFUL STAY FOR BOX LIDS AND DOORS. CHAIN 7-1/2". MOUNTING PLATES 5/16"W X 3/8"H X 1"L. SCREWS INCLUDED.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
ADJUSTABLE BRAKING ACTION FLAP STAY PROVIDES CONTROLLED SUPPORT
|
| Right Hand Braking Flap Stay
...plus other(s)
|
EASY TO INSTALL. THE ADJUSTABLE BRAKING ACTION FLAP STAY HAS AN UP-FRONT ADJUSTMENT SCREW FOR CONTROLLED SUPPORT:
8-10 LBS. MAXIMUM WEIGHT - DESIGNED FOR SMALLER LIDS AND FLAPS. CHROMED STEEL ROD WITH BLACK NYLON SLIDER CONTROL AND ENDS. 8" OVERALL LENGTH; NON-REVERSIBLE (SCREWS INCLUDED). CHOOSE FROM RIGHT- OR LEFT-HAND MODELS.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
STATE OF THE ART LIFT-O-MAT® GAS SPRINGS PROVIDE EFFORTLESS ACCESS
|
| 100n Silver-lift-o-mat
...plus other(s)
|
STABILUS LIFT-O-MAT® GAS SPRINGS ARE FOR CABINET DOORS OR LIDS THAT OPEN UPWARD - GAS FILLED SPRINGS SMOOTHLY OPEN TO 90° OR SECURE DOOR OR LID IN CLOSED POSITION:
IDEAL FOR OVERHEAD KITCHEN CABINETS, OFFICE CABINETRY, BLANKET CHESTS AND MORE. TWO GAS FILLED SPRINGS, FOUR END FITTINGS AND COMPLETE INSTRUCTIONS INCLUDED (MOUNTING SCREWS NOT INCLUDED) - EASY TO INSTALL AND MAINTENANCE FREE. SELECT MODEL 100N FOR 10"-24" HIGH DOORS, WEIGHING 5-7 LBS.; 8-10 LB. DOORS, 10"-18" TALL; OR 10"-15" DOORS, WEIGHING 11-13 LBS. USE 150N WITH 8-10 LB., 19"-24" HIGH DOORS; 16"-24" DOORS, WEIGHING 11-13 LBS.; OR 10"-18" TALL DOORS, WEIGHING 14-20 LBS. GERMANY.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
DAMPER SYSTEM ADDS SOFT CLOSING FEATURE TO SELF CLOSING CABINET DOORS
|
| Smove Cyl For 200/b/f-beige
...plus other(s)
|
THE SALICE SMOVE DAMPER SYSTEM USES SMALL CYLINDERS TO ABSORB THE PRESSURE FROM SELF CLOSING CABINET DOORS AND ELIMINATE NOISE. AFTER A DOOR IS REOPENED, PRESSURE IS RELEASED AND THE CYLINDER PISTON MOVES FORWARD, AGAIN READY FOR USE:
CYLINDERS CAN BE PRESS MOUNTED INTO 10MM DIA. X 50MM DEEP HOLES BORED INTO CABINET FRAMES OR SURFACE MOUNTED, USING OPTIONAL ADAPTERS. FOR BEST RESULTS ON BOTH FACE FRAME AND FRAMELESS CABINETS, CYLINDERS SHOULD BE MOUNTED APPROXIMATELY 27MM FROM THE HINGE SIDE (DISTANCE CAN VARY DUE TO DOOR WEIGHT AND CLOSING PRESSURE). CABINET DOORS OVER 1,600MM (63") HIGH REQUIRE TWO SMOVE CYLINDERS. AVAILABLE IN HONEY OR BEIGE TO COMPLEMENT MOST CABINET COLORS. ITALY.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
ADD BLUMOTION™ SOFT CLOSING ACTION TO YOUR CABINET DOORS
|
| Inline Sgl Adapter Zn/ni Screw-on
...plus other(s)
|
BLUMOTION™ FOR DOORS INSTALLS DIRECTLY INTO CABINET PANELS (10MM DIA. X 50MM DEEP BORE) OR FASTENS ONTO PANELS OR FACE FRAMES USING CAST ZINC ADAPTERS:
CYLINDER SENSES HOW HARD THE DOOR IS BEING CLOSED AND ADJUSTS RESISTANCE TO KEEP THE DOOR FROM SLAMMING SHUT. OPTIMAL MOUNTING POSITION FOR USE WITH COMPACT™ HINGES IS TOP MOUNTED, 8"-12" FROM THE HINGE SIDE. FOR USE WITH CLIP TOP™ HINGES, THE OPTIMAL MOUNTING POSITION IS CENTERED ON THE SIDE OPPOSITE THE HINGES. BASED UPON DOOR WEIGHT, SIZE AND NUMBER OF HINGES USED, OPTIMAL MOUNTING POSITION CAN VARY. A TRIAL APPLICATION IS RECOMMENDED. FOR DOORS UP TO 24" WIDE, ONE BLUMOTION™ CYLINDER IS USUALLY SUFFICIENT. FOR TALLER OR HEAVIER DOORS, TWO MIGHT BE REQUIRED. SOLD INDIVIDUALLY OR IN BOXES OF 50. FOR EASE OF INSTALLATION, THE BLUMOTION™ DRILLING TEMPLATE IS DESIGNED FOR BORING FOR EITHER DIRECT MOUNTING INTO THE CABINET SIDE OR TO POSITION PILOT HOLES FOR THE INLINE OR WING ADAPTERS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
BLUMOTION™ ADDS SELF CLOSING FEATURE TO TANDEM PLUS™ SLIDES
|
| Blumotion Housing/triggers 562 Srs
...plus other(s)
|
A UNIQUE SYSTEM FOR THE SMOOTH AND SILENT CLOSING OF WOOD DRAWERS WITH TANDEM PLUS™ SLIDES, BLUMOTION™ IS NOT JUST A RESISTANCE DEVICE - AT 2" FROM CLOSING IT CAPTURES, CLOSES AND HOLDS THE DRAWER CLOSED:
HOUSINGS AND TRIGGERS ATTACH TO SLIDES BY HAND - AN ADDITIONAL 1MM HEIGHT CLEARANCE REQUIRED FOR INSTALLATION. SOLD IN PAIRS OR IN BOXES OF 12 PAIRS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
SOFT CLOSING BLUMOTION 971A FOR COMPACT HINGES
|
| Blumotion Kit For Compact Hinge
...plus other(s)
|
BLUM® BLUMOTION 971A FOR COMPACT HINGES OFFERS THE SAME QUALITY OF MOTION FOR CABINET DOORS AS REGULAR BLUMOTION DOES FOR DRAWER SYSTEMS:
ADJUSTABLE TO VARIOUS DOOR HEIGHTS AND WEIGHTS (+5/-5MM RANGE). INSTALL ANYWHERE ONTO HINGE-SIDE OF CABINET - NICKEL PLATED STEEL CONSTRUCTION. FOR USE WITH STRAIGHT ARM HINGE AND 0MM OR 3MM MOUNTING PLATE. NOTE: DESIGNED ONLY FOR BLUM® COMPACT HINGES. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
SOFT CLOSING BLUMOTION 971A FOR EURO HINGES
|
| Blumotion/doors Wing Plate 0mm
...plus other(s)
|
BLUM® BLUMOTION 971A FOR HINGES OFFERS THE SAME QUALITY OF MOTION FOR CABINET DOORS AS REGULAR BLUMOTION DOES FOR DRAWER SYSTEMS:
ADJUSTABLE TO VARIOUS DOOR HEIGHTS AND WEIGHTS (+3/-7MM RANGE). INSTALL ONTO HINGE-SIDE PANEL - NICKEL PLATED STEEL CONSTRUCTION. FOR USE WITH STRAIGHT ARM HINGE AND 0MM OR 3MM MOUNTING PLATE. NOTE: DESIGNED ONLY FOR BLUM® EURO HINGES. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
SOFT CLOSING BLUMOTION 973A FOR EURO HINGES
|
| Blumotion- F/o 120d Hinges
...plus other(s)
|
BLUM® BLUMOTION 973A FOR HINGES OFFERS THE SAME QUALITY OF MOTION FOR CABINET DOORS AS REGULAR BLUMOTION DOES FOR DRAWER SYSTEMS:
AUTOMATICALLY ADJUSTS TO THE CLOSING FORCE OF THE DOOR. SIMPLE ATTACHMENT - NICKEL PLATED STEEL CONSTRUCTION. NOTE: DESIGNED ONLY FOR BLUM® EURO HINGES. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Closing Mechanisms - Not Listed Elsewhere
|
HEAVY DUTY ARCHITECTURAL HARDWARE THAT'S "A CUT ABOVE"
|
| Cast Wall Bumper-convex-brass
...plus other(s)
|
QUALITY AND ATTENTION TO DETAIL ARE APPARENT WHEN YOU PICK UP ANY OF THIS HEAVY DUTY ARCHITECTURAL HARDWARE, WHICH IS MANUFACTURED IN ACCORDANCE WITH STRINGENT BHMA/ANSI REQUIREMENTS:
ALL FEATURE HEAVY CASTINGS WITH DURABLE FINISHES. POLISHED BRASS AND US26D SATIN STAINLESS STEEL FINISHES MEET OR EXCEED AAMA 611-98. WALL OR FLOOR ANCHORS AND FASTENERS INCLUDED.. LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Not Listed Elsewhere
|
SAFETY CABINET LATCHES HELP PROTECT CHILDREN
|
| Safety Cabinet Latch
|
TOUGH AND STRONG, KINDERGARD® SAFETY CABINET LATCHES ALLOW EASY ACCESS, YET HELP KEEP CURIOUS CHILDREN PROTECTED:
EASY TO INSTALL; DON'T SHOW WHEN CABINET DOORS ARE CLOSED AND REQUIRE ONLY A FINGER TO OPEN (MOUNTING SCREWS INCLUDED). SEVEN LATCHES PER PACKAGE.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Closing Mechanisms - Not Listed Elsewhere
|
BRUSSO® SOLID BRASS MORTISED LID SUPPORTS
|
| Small Mortised Lid Support
...plus other(s)
|
QUIET, SOLID AND SMOOTH DESCRIBE THESE IMPRESSIVE, BRUSSO® SOLID BRASS MORTISED LID SUPPORTS, DESIGNED FOR HEIRLOOM CREATIONS:
BODY IS MORTISED INTO THE SIDE AND A FLANGED CYLINDRICAL ANCHOR IS PRESSURE-FITTED AND GLUED INTO THE LID. 943-152 MODEL JB-280 - 4-5/16"L X 3/8"W X 3/4"D, 7/16" DIA. ANCHOR. 912-244 MODEL JB-250 - 2-7/8"L X 1/4"W X 1/2"D, 1/4" DIA. ANCHOR. EACH REVERSIBLE FOR RIGHT- OR LEFT-HAND APPLICATIONS (SCREWS INCLUDED). USA.
|
|
|
|
Hardware Drawer Slides - Accessories
|
MINIFIX™ JIG SIMPLIFIES BLUM® SINGLE EXTENSION DRAWER SLIDE INSTALLATION
|
| Minifix Jig For Drawer Slides
...plus other(s)
|
THE BLUM® 65.3300 MINIFIX™ JIG PRECISELY LOCATES MOUNTING SCREW HOLES FOR BOTTOM MOUNT, SINGLE EXTENSION DRAWER SLIDES:
JIG HOLDS AND ALIGNS SLIDES SQUARE TO CABINET FRONT FOR UNIFORM INSTALLATION. ENSURES PROPER SETBACK FOR OPTIMUM DRAWER OPERATION. CAN BE HAND HELD OR CLAMPED TO CABINET FOR USE. USE 2.85MM SELF-CENTERING BIT (SOLD SEPARATELY) FOR PILOT HOLES. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
BLUM® SINGLE EXTENSION DRAWER SLIDES - 135-050. BLUM® SINGLE EXTENSION SLIDES FOR LONG DRAWERS - 135-851.
|
|
|
|
Hardware Drawer Slides - Accessories
|
EASILY ALIGN BLUM® DRAWER FRONTS USING THESE ADJUSTERS
|
| Drawer Front Adjusters-bulk
...plus other(s)
|
BLUM® 295.1000 DRAWER FRONT ADJUSTERS ADJUST HEIGHT AND SIDE-TO-SIDE BY 5MM (3/16") - SOLD IN BAGS OF 10 PAIR OR BOXES OF 1,000:
NYLON HOUSING WITH PRE-MOUNTED #8-32 STEEL NUT. USE ON FOUR SIDED WOODEN DRAWERS. FIT 20MM BORE, 10.5MM DEEP. USE #8-32 MACHINE SCREWS TO MOUNT FRONT TO DRAWER (OPTIONAL #8-32 X 1-3/4" BREAKAWAY SCREWS 807-128 - SCORED IN 1/4" INCREMENTS - PROVIDE A 3/4" TO 1-3/4" WORKING LENGTH). 65.2950.10 - OPTIONAL MARKING GAUGE SIMPLIFIES LOCATING SCREW HOLES IN THE DRAWER BOX - STANDARD BORING FOR DRAWER FRONT ADJUSTERS ALLOWS MARKING GAUGE TO FUNCTION LIKE A DOWEL CENTER TO MARK BORING LOCATIONS. 135-671, 913-686 - DRILL BITS SOLD SEPARATELY. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Drawer Slides - Accessories
|
BLUM® TANDEM SPACER BLOCKS
|
| 1" Tandem Slide Spacers
...plus other(s)
|
|
BLUM® T59.3570 TANDEM™ SPACER BLOCKS ARE USED TO MOVE TANDEM PLUS™ SLIDES AWAY FROM CABINET SIDES FOR CLEARANCE FOR INTERIOR DRAWERS OR ROLL-OUT TRAYS: 25MM (1") THICK PLASTIC SPACER BLOCKS ARE FASTENED TO CABINET SIDES AND SLIDES USING 13.5MM EURO SCREWS - TWO SPACERS PER RUNNER ON SLIDES FROM 9" TO 15"; THREE SPACERS PER SLIDE FOR LONGER SLIDES. PACKED 5 PAIRS OF SPACERS AND 40 SCREWS PER BAG. BOXES OF 100 SPACERS REQUIRE 807-275 EURO SCREWS (SOLD SEPARATELY). LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Drawer Slides - Accessories
|
PLASTIC SLIDE SPACERS
|
| 1/4" Plastic Slide Spacer
...plus other(s)
|
USE PLASTIC SLIDE SPACERS TO ALLOW DRAWER SLIDES TO CLEAR FACE FRAMES AND HINGES FOR INTERIOR DOORS:
SPACERS MOUNT IN 32MM HOLE SPACING USING INCLUDED 13.5MM LONG EURO SCREWS:
SLIDES ATTACH TO SPACERS WITH EURO SCREWS (SYSTEM SCREWS) OR WITH #6 FLAT HEAD WOOD SCREWS. PACKED 10 PAIRS OF SPACERS AND 40, EACH, 13MM EURO SCREWS PER BAG.
|
|
|
|
Hardware Drawer Slides - Accessories
|
TIP-ON FOR TANDEM PLUS OPENS DRAWERS AT A TOUCH
|
| Tip-on For Tandem Slides
|
BLUM® TIP-ON FOR TANDEM PLUS LETS YOU OPEN AND CLOSE DRAWERS EQUIPPED WITH TANDEM PLUS FULL EXTENSION SLIDES WITHOUT USING PULLS - A SIMPLE TOUCH ON THE FRONT IS ALL THAT'S REQUIRED:
WORKS FOR BOTH FRAME AND PANEL CABINET APPLICATIONS - TOOL FREE INSTALLATION. INTEGRATED DEPTH ADJUSTMENT LETS YOU SET THE DRAWER FRONT EXACTLY. COMES WITH TWO MECHANISMS, TWO ADJUSTABLE TRIGGERS AND TWO REAR HOOK SPACERS. 45 LBS. LOAD CAPACITY. NOTE: DESIGNED ONLY FOR TANDEM PLUS FULL EXTENSION DRAWER SLIDES WITHOUT BLUMOTION. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Drawer Slides - Accessories
|
NEVER PULL OUT A DRAWER AGAIN
|
| Press Fit Drawer Stop
|
|
DRAWER STOP DELIVERS AN OUNCE OF PREVENTION RIGHT WHERE IT'S NEEDED. DRILL 5/16" X 9/16" DEEP HOLE INTO DRAWER BACK OR CASE AND PRESS IN 1-1/4"L X 7/16"W X 1/2"T NYLON STOP. PUSH DOWN STOP TO REMOVE DRAWER. 5 PER BAG.
|
|
|
|
Hardware Drawer Slides - Accessories
|
ADJUSTABLE BACK PLATE FOR CENTER MOUNT DRAWER SLIDES
|
| Adjustable Backplate
|
|
DESIGNED FOR USE WITH WOODEN DRAWER SLIDES, THE ADJUSTABLE BACK PLATE ACCOMMODATES SLIDES FROM 1" TO 1-7/16" WIDE (IN 1/16" INCREMENTS) AND UP TO 5/16" THICK AT THE "T". SELF LUBRICATING WHITE NYLON (MOUNTING SCREWS INCLUDED). SOLD IN PACKAGES OF FOUR.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
KNAPE & VOGT® 8400 SERIES SELF CLOSING DRAWER SLIDES
|
| 12" 8417 Sc Full Ext Slide
...plus other(s)
|
KV 8417 AND KV 8419 DRAWER SLIDES OFFER SMOOTH, QUIET AND RELIABLE PERFORMANCE PLUS A SELF CLOSING FEATURE - USE FOR BOX DRAWERS UP TO 18" WIDE:
A FORWARD IN STOP ABSORBS THE IMPACT OF THE CLOSING DRAWER, REDUCING STRESS ON THE SELF CLOSING MODULE. RETURN SPRING IS GUIDED WITHOUT NEED FOR AN INTERNAL RIVET, ELIMINATING METAL TO METAL NOISE FOUND IN OTHER BRANDS. 1/2", ±1/32", CLEARANCE PER SIDE. ANOCHROME FINISH (SCREWS AND COMPLETE INSTRUCTIONS INCLUDED). KV 8419 SLIDES HAVE 1" OVERTRAVEL IN ALL LENGTHS. EXCEED BHMA, KCMA AND BIFMA 100 LB. CLASS REQUIREMENTS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KV® FACE FRAME BRACKETS - <868-157.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
KV 3/4" PRECISION BALL BEARING DRAWER SLIDES PROVIDE SMOOTHER FIT AND FEEL
|
| 16" 8305 3/4 Ext Bb Slide
...plus other(s)
|
DESIGNED FOR DESK, PEDESTAL AND CABINET BOX APPLICATIONS, KV PRECISION BALL BEARING SLIDES FEATURE 32MM AND TRADITIONAL HOLE PATTERNS:
50 LB. CLASS RATINGS. FRONT LOCK AND QUICK DISCONNECT RAILS FOR EASY DRAWER REMOVAL. FLEXIBLE MOUNTING TABS SELF ADJUST SIDE CLEARANCES. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
MEPLA FULL EXTENSION, BALL BEARING UNDERMOUNT DRAWER SLIDES
|
| Mr885 Undermount Slide Fe Bb 12"
...plus other(s)
|
MEPLA FULL EXTENSION, BALL BEARING UNDERMOUNT DRAWER SLIDES EXTEND FULLY, CAN SUPPORT UP TO 125 LBS. AND OFFER EXCELLENT SIDE STABILITY. THEY ALSO FEATURE:
SELF CLOSING, CONCEALED OPERATION.±1.5MM INSTALLATION TOLERANCE.2.5MM TOOL-LESS HEIGHT ADJUSTMENT.EASY, SNAP IN DRAWER MOUNTING.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
WOODTEK® FULL EXTENSION, BALL BEARING DRAWER SLIDES
|
| 16" Full Ext Bb Slide-zinc
...plus other(s)
|
WOODTEK® FULL EXTENSION, BALL BEARING DRAWER SLIDES ARE AVAILABLE IN THE FOUR MOST POPULAR LENGTHS, FEATURE 100 LB. LOAD CAPACITIES, A RECTANGULAR PROFILE AND CLEAR ZINC OR BLACK FINISH:
EXCEED BIFMA AND BHMA PERFORMANCE REQUIREMENTS AND ARE WIC CERTIFIED. NON-HANDED DESIGN FOR VERSATILITY - TRIGGER RELEASE FOR EASY DISCONNECT. 1/2", ±1/32", SIDE CLEARANCE. PRE-DRILLED 32MM SPACING FOR EASE OF INSTALLATION - INSTRUCTIONS INCLUDED. MOUNT USING WOOD OR EURO SCREWS (SCREWS NOT INCLUDED). SOLD ONLY IN CARTONS OF 10 PAIRS. IMPORTED.
|
|
|
|
Please Wait......Searching....
to see Sub Categories)
