|
|
|
Machinery Accessories - Jigs And Fixtures
|
ANGLE°PERFECT III™ AND BLADEGAUGE III™ COMBO KIT
|
| Combo Kit Angle Per & Blade Gauge
|
THE KIT-1 ANGLE°PERFECT III™ & BLADEGAUGE III™ COMBO KIT WITH ZERO CLIP™ CAN HELP YOU SET UP ALMOST ANY POWER TOOL IN YOUR SHOP TO 1/100S-OF-1" ACCURACY:
ANGLE°PERFECT III™ USES AN LED TO LET YOU SET UP THE SIX CRITICAL ELEMENTS OF TABLESAW ALIGNMENT. 2-1/8H X 2W X 7-1/2"L; WEIGHS 12.8 OZ. USING THE BLADEGAUGE III™, YOU CAN DETERMINE TABLESAW BLADE AND ROUTER BIT HEIGHT FROM 1/32" TO 2", IN 1/32" INCREMENTS, BY ALSO USING THE BUILT-IN LED. 2-1/8H X 2W X 10"L; 12.8 OZ. MAGNETIC BASES ALLOW HANDS-FREE OPERATION - MAGAWIRE™ PROVIDES AN ELECTRICAL PATH FOR BLADEGAUGE III™ ON NON-CONDUCTIVE TABLE TOPS. FEATURING ZERO CLIP™, EITHER CAN BE USED TO ENSURE THAT JOINTER BLADES ARE INSTALLED PERFECTLY LEVEL. KIT COMES WITH FEELER GAUGE, EXTRA 3V BATTERY, BRASS SHIMS, EXTRA CLIPS, HEX WRENCH, CHOICE OF DEMONSTRATION DVD OR VHS TAPE, 2-3/4"H X 5"D X 11-3/4" WOOD STORAGE CASE AND COMPLETE INSTRUCTIONS. 2 LBS., 12 OZ. SHIPPING WEIGHT. ONE-YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA POWERGRIP JAWS
|
| Long Nose Jaws
...plus other(s)
|
THE NOVA POWERGRIP JAWS HAVE 1-1/8" DEEP JAWS WITH INTERNAL SERRATIONS FOR EXCEPTIONAL HOLDING POWER. THE MULTI-PURPOSE JAWS HAVE AN EXTERNAL DOVETAIL ON THE OUTSIDE RIM DOUBLING AS 4" JAW SET:
PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA POWERGRIP JAWS
|
| Powergrip Jaws
|
THE NOVA POWERGRIP JAWS HAVE 1-1/8" DEEP JAWS WITH INTERNAL SERRATIONS FOR EXCEPTIONAL HOLDING POWER. THE MULTI-PURPOSE JAWS HAVE AN EXTERNAL DOVETAIL ON THE OUTSIDE RIM DOUBLING AS 4" JAW SET:
PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Mobile Bases
|
EASY MACHINE MOVEMENT, GUARANTEED - HTC MOBILE BASES WORK BETTER THAN ANY CASTER SYSTEM
|
| Mb, Delta Contractor Saw Crow Feet
...plus other(s)
|
MAKE YOUR POWER TOOLS EASY TO MOVE OR STORE. WHEN YOU WANT ONE, SIMPLY ROLL IT ON ITS HTC MOBILE BASE TO WHERE YOU NEED IT - WHEN YOU'RE DONE, ROLL IT BACK:
THREE POINT LEVELING SYSTEM PROVIDES A SOLID, STABLE STANCE THAT REQUIRES NO TILTING OR ADJUSTING - SEAMLESS WELDING WITH ALL STEEL TUBULAR CONSTRUCTION FOR EXTRA STRENGTH. TWO RIGID WHEELS WITH LOCKING MECHANISMS AND ONE LOCKING SWIVEL WHEEL RAISE MACHINES 3/4" ABOVE FLOOR, ELIMINATING THE NEED TO RECALIBRATE MACHINE SETTINGS THAT CAN BE THROWN OFF BY RAISING AND LOWERING THE MACHINE
HRC-10 - (FITS INSIDE LEGS) DELTA® OLDER 50-315 CONTRACTOR'S SAW® WITH 25" STANDARD FENCE. HRD-10 - DELTA® 34-444, 36-440 AND 36-444 10" CONTRACTOR'S SAW® AND BENCH SAWS. HRLB-6 - DELTA® OLDER MODEL 14" BANDSAW, 6" BELT AND/OR 12" DISC SANDER AND OLDER MODEL 6" JOINTER WITH ENCLOSED TAPERED STANDS; ENCO® 199-9001, -9005, -9011 14" BANDSAWS. HRS-10 - DELTA® UNISAW® WITH 25" FENCE; JET JTAS-10 10" TABLESAW WITH STANDARD FENCE; GRIZZLY® G-1023, G-1023Z TABLESAWS; STAR TOOLS/ENLON IMPORT S3202, EN3202 TABLESAWS; JET OVS-10 SPINDLE SANDER; BRIDGEWOOD® YC-15P PLANER; DELTA® 43-370 THROUGH -386, TWO SPEED SHAPERS. HRBS-14 - DELTA® OLDER MODEL 50-312 FLARED LEG 14" BANDSAW. HRO-14 - DELTA® 28-275 AND 50-313 14" FOUR LEG BANDSAWS; DELTA® 43-355 SHAPER. HRSS-18 - DELTA® 40-560, -601, -640 16", 18", 20" SCROLL SAWS; LOBO MACHINERY CORP. JT-8 8" JOINTER. HRL-12 - DELTA® 12" STANDARD DUTY LATHE. HRJ-15 - DELTA® DJ-15 6" JOINTER; JET OLDER MODEL JBS-14 OS 14" BANDSAW; STAR TOOLS/ENLON IMPORT ENBS14N 14" BANDSAW; BRIDGEWOOD® YC-8J 8" JOINTER. HRD-10-X - DELTA® 34-445 & 36-490, -455 10" CONTRACTOR'S SAW® AND BENCH SAWS WITH 30" FENCE. HRS-8-X - DELTA® 36-751 10" CABINET SAW WITH 30" FENCE. HRS-8-G - DELTA® 36-752 10" CABINET SAW WITH 52" FENCE. HSJ-1413 - JET JWBS-14C 14" CLOSED STAND BANDSAW. HJTS-761 - JET 10" CONTRACTOR SAW; STAR TOOLS/ENLON IMPORT S3501 14.5" BANDSAW. HSK-593 - DELTA® 17-900 DRILL PRESS; GENERAL INTERNATIONAL 75-100 & 75-200 17" DRILL PRESSES; JET JDP-17MF 16-1/2" DRILL PRESS. HPB-30-S - JET JWBS-18 18" BANDSAW; POWERMATIC OLDER 30-B & 33-B BELT AND DISC SANDERS WITHOUT DUST COLLECTORS. HRS-2158 - DELTA® 40-650 18" THREE LEG SCROLL SAW; DEWALT® 20" DW-788 THREE LEG SCROLL SAW. HSB-2665 - DELTA® 31-250 18" X 36" DRUM SANDER. HDS-210 - DELTA® 31-280 6" BELT/12" DISC SANDER. HRS-10-G - DELTA® UNISAW® WITH 50" EXTENSION FENCE; JET JTAS-10 TABLESAW WITH 52" FENCE; GRIZZLY® G-1023 TABLESAW WITH 50" EXTENSION FENCE. HRLB-8 - DELTA® 8" LONG BED JOINTER (OLD STYLE). HRJ-8 - DELTA® 37-350 8" JOINTER. HRL-16 - DELTA® DL-40 ELECTRONIC LATHE. HRL-700 - DELTA® 46-705 LATHE; JET JWL-1236 LATHE. HRS-8 - DELTA® 36-755 10" CABINET SAW WITH 25" FENCE; BRIDGEWOOD® BW-310SL SHAPER. HRLS-5 - DELTA® 28-280 14" BANDSAW. LIFETIME MANUFACTURER'S WARRANTY. USA. LOCATE MOBILE BASES FOR WOODTEK® PRODUCTS BY ENTERING THE MACHINE'S SIX DIGIT PRODUCT NUMBER INTO THE WOODWORKER.COM WIZARD QUERY® SEARCH BOX.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
QUICK-SET SHIELD™ WORKS WHERE OTHERS CAN'T REACH
|
| 6"x8" Quick Set Shield
...plus other(s)
|
AVAILABLE IN TWO SIZES, THE QUICK-SET SHIELD™ PROVIDES PROTECTION FROM FLYING CHIPS WHEN USING BANDSAWS, DRILL PRESSES, ROUTER TABLES OR OTHER POWER TOOLS:
FULL, 1/8" THICK POLYCARBONATE SHIELD ATTACHES TO A FLEXIBLE 14"L X 3/4" DIA. LOC-LINE® ARM AND SWIVELS A FULL 360°. SHIELDS COME WITH MAGNETIC AND DIRECT MOUNTS. USA.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
FINE TUNE YOUR TOOLS TO 0.001" ACCURACY WITH THE RED-LINE X POINT POWER TOOL SETUP GAUGE
|
| X-point Power Tool Setup Gauge
|
NOW YOU CAN ALIGN ALL OF THE COMPONENTS OF STATIONARY POWER TOOLS SO THEY CUT SMOOTHLY, QUIETLY AND WITH PERFECT ACCURACY. WITH THE RED-LINE X POINT POWER TOOL SETUP GAUGE YOU CAN TEST THE FLATNESS OF TABLESAW BLADES, CHECK TABLESAW ARBOR RUNOUT, ALIGN BLADE AND RIP FENCES WITH MITER SLOTS, SET MITER GAUGE ANGLES, MEASURE DRILL PRESS SPINDLE RUNOUT, SQUARE DRILL PRESS TABLE TO SPINDLE, SET JOINTER KNIVES AND CHECK BANDSAW TABLES FOR SQUARENESS TO THE BLADE:
THREE POINT BEARING GUIDES ENSURE A "SLOP FREE" FIT IN MITER GAUGE SLOTS; TWO POWERFUL RARE EARTH MAGNETS HOLD THE BASE TIGHT TO TOOL SURFACE, WHILE BASE LEVELING SCREWS ENSURE SQUARENESS TO TOOL SURFACES. SOLID ALUMINUM WITH PRECISION, EASY TO READ ANALOG DIAL INDICATOR. COMPLETE INSTRUCTIONS AND MOLDED PROTECTIVE CASE INCLUDED.
|
|
|
|
Machinery Accessories - Stands
|
DELTA® UNIVERSAL STAND
|
| Universal Stand
|
USING THE DELTA® 50-330 UNIVERSAL STAND YOU CAN CONVERT A BENCH TOP DRILL PRESS OR SIMILAR POWER TOOL INTO A FLOOR MODEL:
HEAVY GAUGE STEEL RAILS AND LEGS - BOLT TOGETHER ASSEMBLY. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
Click for More Info
|
Portable Power Tool Accessories - Belt Sanders
|
DEWALT® 3" X 21" HEAVY DUTY BELT SANDERS
|
| Dw4050 Vacuum Adapter For Sanding Frame
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
PORTER-CABLE® PORTABLE OSCILLATING SPINDLE SANDER PROVIDES AGGRESSIVE BURN-FREE SANDING
|
| Pc Set Of 3 Drums 3/4" 1" 1 1/2"
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
DEWALT® 12" DOUBLE BEVEL COMPOUND MITER SAW IS POWERFUL AND VERSATILE
|
| Extension System
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
PROXXON THREE SPEED BENCH DRILL PRESS CAN DRILL HOLES AS SMALL AS 0.02"
|
| Keyed Chuck For Proxon Drill Press
...plus other(s)
|
THE IDEAL MACHINE FOR PRECISE DRILLING, THE PROXXON MODEL 38 128 THREE SPEED BENCH DRILL PRESS CAN CUT THE SMALLEST DIAMETER HOLES WITH EXTREMELY HIGH ACCURACY:
120V MOTOR USES ALUMINUM PULLEYS AND FLAT BELT FOR 1,800, 4,700 AND 8,500 RPM SPINDLE SPEEDS. DIE CAST ALUMINUM WITH HARD CHROMED STEEL COLUMN; ADJUSTABLE FENCE INCLUDES SCALE. 1.25" QUILL DIAMETER WITH RETURN SPRING; CHROME FEED LEVER WITH ADJUSTABLE DEPTH GAUGE. 5.5" THROAT DEPTH; CLAMP LEVER FOR QUICK HEIGHT ADJUSTMENTS. 11"H X 8.7D" X 4.7"W. INCLUDES SIX, TRIPLE SLIT PRECISION COLLETS FOR 0.04" TO 0.125" SHAFTS AND INSTRUCTION MANUAL. 121-610 - OPTIONAL CHUCK, WITH KEY, ACCOMMODATES DRILL BITS UP TO 0.24"; 10,000 RPM MAXIMUM SPEED. GERMANY.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
DEWALT® ADJUSTABLE MITER SAW LASER SYSTEM DOESN'T NEED BATTERIES
|
| Dw7187 Mitersaw Laser Kit
|
POWERED BY THE SAW - NOT BATTERIES - THE DEWALT® DW7187 ADJUSTABLE MITER SAW LASER SYSTEM ALSO HAS AN ON/OFF SWITCH THAT ALLOWS THE LASER TO OPERATE WITH OR WITHOUT THE BLADE SPINNING:
BRIGHT LASER LINE DELIVERS ENHANCED VISIBILITY IN LOW AND HIGH LIGHT CONDITIONS. PROTECTED LASER DIODE IN OPTIMUM LOCATION DELIVERS LONG TERM DURABILITY WHILE KEEPING THE DIODE CLEAR AND VISIBLE. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
HITACHI UNIVERSAL WORKSTATION
|
| Mitersaw Stand
...plus other(s)
|
CONSTRUCTED USING HEAVY DUTY ALUMINUM, THE UU610CZ UNIVERSAL WORKSTATION BEAM CAN SUPPORT UP TO 500 POUNDS:
HOLDS UP TO 12' LONG MATERIAL USING TWO FULLY ADJUSTABLE, 12" WORK SUPPORTS. PATENTED CAM LOCK MOUNT ALLOWS DROP-ON SAW INSTALLATION. DUAL EXTENSION ARMS ACCEPT ROUTER AND VISE ACCESSORIES. INCLUDES FEET FOR INDEPENDENT USE. FOLDS TO 3.75'; WEIGHS 38.5 LBS. SIMILAR UU610 UNIVERSAL WORKSTATION SUPPORTS MATERIAL UP TO 20' LONG. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
BOSCH PORTABLE MITER SAW STANDS PROVIDE UP TO 18' OF MATERIAL SUPPORT
|
| T3b Trac-rac Portable Miter Saw Stand
...plus other(s)
|
BOSCH MITER SAW STANDS NOT ONLY OFFER EXCEPTIONAL CAPACITY BUT THEIR VERSATILE TOOL MOUNTS WILL ACCOMMODATE ALMOST ANY BRAND OF MITER SAW (MITER SAW NOT INCLUDED):
T4B GRAVITY RISE MITER SAW STAND:
QUICK RELEASE CLAMP MOUNTING SYSTEM. RAPID SETUP AND BREAKDOWN - 400 LBS. CAPACITY. 8" PNEUMATIC WHEELS AND ADJUSTABLE LEVELING FEET. POWER COATED 1-1/2" TUBULAR STEEL FRAME. 80 LBS. NET WEIGHT; 90 SHIPPING WEIGHT.
T3B TRACRAC® MITER SAW STAND:
CAM LOCK CLAMP MOUNTING SYSTEM. FOLDING/TELESCOPING LEGS - 500 LBS. CAPACITY. 4" HARD RUBBER WHEELS. 44 LBS. NET WEIGHT; 53 SHIPPING WEIGHT.
T1B FOLDING LEG MITER SAW STAND:
QUICK RELEASE CLAMP MOUNTING SYSTEM. FOLDING LEGS WITH PUSH BUTTON RELEASE HINGES. TELESCOPING STOCK SUPPORT EXTENSIONS W/STOCK STOPS. POWER COATED TUBULAR STEEL FRAME. 47 LBS. NET WEIGHT; 48 SHIPPING WEIGHT.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
MILESCRAFT CROWN45™ CROWN MOLDING CUTTING JIG
|
| Milescraft Crown 45 Cutting Jig
|
|
MAKE BEAUTIFUL MANTLES, SURROUNDS, AND CROWN MOLDING TRIM WORK WITH EASE. THE CROWN45™ IS AN EASIER AND SAFER WAY FOR YOU TO CUT CROWN MOLDING ON A POWER MITER SAW OR RADIAL ARM SAW. ONLY THE CROWN45™ HOLDS THE TRIM FOR CUTTING OR COPING THE SAME WAY IT IS INSTALLED. ADJUSTS FOR 38°, 45° AND 52° SPRING ANGLE AND INCLUDES GAUGES FOR CHECKING THOSE ANGLES. INCLUDES INSERTS FOR SMALL STOCK WHICH CAN BE REMOVED TO ACCOMMODATE DENTIL MOLDING. THE WHOLE UNIT FOLDS FOR TRANSPORT TO THE JOBSITE AND EASY STORAGE.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
BIESEMEYER® T-SQUARE® MITER SAW TABLE SYSTEMS MAKE POWER MITER SAWS MORE ACCURATE AND PRODUCTIVE
|
| 2' Miter Saw Table System For 10" Saws
...plus other(s)
|
DESIGNED TO FIT EITHER THE LEFT OR RIGHT SIDE, BIESEMEYER® MITER SAW TABLE SYSTEMS FIT MOST 10" AND 12" MITER SAWS, 10" SLIDING COMPOUND MITER SAWS AND 12" RADIAL ARM SAWS:
TABLES ARE 3/4" LAMINATED PARTICLE BOARD, EDGED WITH BLACK T-MOLDING. BUILT-IN SLOT ELIMINATES SAWDUST BUILDUP; FRAME IS WELDED STEEL. FOR A COMPLETE SYSTEM ORDER TWO TABLES.
78-802 - 2'L X 5-1/2"W TABLE FOR 10" MITER SAWS. 78-804 - 4'L X 5-1/2"W TABLE FOR 10" MITER SAWS. 78-806 - 6'L X 5-1/2"W TABLE FOR 10" MITER SAWS. 79-803 - 3'L X 10"W TABLE FOR 12" SAWS AND 10" SLIDE SAWS. 79-804 - 4'L X 10"W TABLE FOR 12" SAWS AND 10" SLIDE SAWS. 79-806 - 6'L X 10"W TABLE FOR 12" SAWS AND 10" SLIDE SAWS.
78-989 - OPTIONAL BIESEMEYER® T-SQUARE® DUAL POINTER CUT OFF SAW STOP IS PRECISE TO 1/64".
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
BIESEMEYER® STOPS FOR EVERY SAWING NEED
|
| Cut Off Gang Stop
...plus other(s)
|
BIESEMEYER® STOPS HAVE BEEN DESIGNED TO FIT AND PROVIDE GREATER ACCURACY FOR ANY RADIAL ARM, MITER SAW OR SLIDE SAW FENCE SYSTEM WITH A 1-5/8" HIGH FENCE:
78-989 - T-SQUARE® DUAL POINTER CUT-OFF SAW STOPS ARE PRECISE TO 1/64" AND ARE THE SIMPLEST WAY TO ELIMINATE C-CLAMPS OR SCRAPS OF WOOD FROM YOUR CROSSCUTTING STATION. DUAL HAIRLINE POINTERS (PRECISE TO 1/64") LET YOU WORK ON EITHER SIDE OF THE BLADE. 78-992 - T-SQUARE® DUAL POINTER FLIP STOPS ARE A GOOD CHOICE FOR REPETITIVE CUTTING OPERATIONS. STOPS FLIP OUT OF THE WAY AND CAN BE GANGED AS CLOSE AS 4-1/2" ALONG THE FENCE. 78-987 - 5-1/2" WIDE T-SQUARE® CUT-OFF GANG STOPS ARE FOR 12" WIDE TABLES. 78-988 - 10" WIDE T-SQUARE® CUT-OFF GANG STOPS ARE FOR 16" WIDE TABLES. SINGLE HAIRLINE POINTERS. GANG STOPS LET YOU CUT SEVERAL PIECES OF MATERIAL UP TO THE FULL WIDTH OF YOUR TABLE. 78-990, 78-994 - OUTSIDE/CUT-OFF MITER STOPS ARE FOR PRECISE CUTTING TO THE OUTSIDE OF THE MITER WHILE INSIDE/CUT-OFF MITER STOPS ARE FOR CUTTING TO THE INSIDE OF THE MITER. BOTH HAVE DUAL POINTERS.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
SET - HARDWARE KIT AND PLAN FOR WINGS
|
| Set - Hardware Kit And Plan For Wings
...plus other(s)
|
MAKE FIXTURES EASIER, QUICKER AND, IN SOME CASES, SAFER TO USE. THESE JIG AND FIXTURE KNOBS ARE HARD, BLACK PLASTIC LIKE THOSE ON INDUSTRIAL MACHINES:
IDEAL FOR WORK IN TIGHT SPACES. ADJUSTABLE HANDLE KNOBS ARE SPRING LOADED TO REMAIN ENGAGED UNTIL YOU LIFT AND DISENGAGE THEM. USA.
|
|
|
|
Portable Power Tool Accessories - Carvers
|
TUNGSTEN CARBIDE BURRS - 1/4" X 3/4" X1/4" SA1
|
| 1/4x5/8x1/4 Tungsten Carb Burs
...plus other(s)
|
PRECISION GROUND USING DIAMOND WHEELS, THESE CONCENTRIC TUNGSTEN CARBIDE BURRS FEATURE SHARP, UNIFORM TEETH FOR FAST, SMOOTH GRINDING:
USE RPM1 FOR IRON, STEEL WELDS, CAST IRON, TOOL STEEL, DIE STEEL, BRONZE, BRASS AND ALUMINUM; SELECT RPM2 FOR USE ON STAINLESS STEEL. 1/4" CUT DIAMETER - RPM1 22,000; RPM2 33,000. 3/8" CUT DIAMETER - RPM1 18,000; RPM2 27,000. 1/2" CUT DIAMETER - RPM1 16,000; RPM2 16,000. 1/4" SHANKS EXCEPT 120-848 AND 120-821, WHICH HAVE 1/8" SHANKS. DOUBLE CUT (ALTERNATE CUT) DESIGN OFFERS SMOOTHER OPERATION AND BETTER TOOL CONTROL.
|
|
|
|
Portable Power Tool Accessories - Carvers
|
1/4" SHANK CARBIDE BURRS - BALL NOSE CYLINDER
|
| Ball Nose Cylinder Std Cut 1/2"
...plus other(s)
|
PRECISION GROUND USING DIAMOND WHEELS, THESE TUNGSTEN CARBIDE BURRS FEATURE SHARP, UNIFORM TEETH AND ARE CONCENTRIC AND PROPERLY BALANCED FOR LONG LIFE:
SELECT "STANDARD CUT" FOR AGGRESSIVE STOCK REMOVAL - "DOUBLE CUT" PRODUCES A SMOOTH FINISH. 1/2" CUT DIAMETER, 1/4" SHANKS, 2-3/4" O.A.L, UNLESS OTHERWISE INDICATED. SHOULD NOT BE USED IN EXCESS OF 30,000 RPM.
123-317 - BALL NOSED CYLINDER - STANDARD CUT. 123-320 - BALL NOSED CYLINDER - DOUBLE CUT. 123-323 - BALL NOSED CONE - STANDARD CUT, 3" O.A.L. 123-326 - BALL NOSED CONE - DOUBLE CUT, 3" O.A.L. 123-329 - STRAIGHT CYLINDER - STANDARD CUT. 123-332 - STRAIGHT CYLINDER - DOUBLE CUT. 123-335 - BALL NOSED TREE - STANDARD CUT. 123-338 - BALL NOSED TREE - DOUBLE CUT. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FOREDOM® 1/6HP HANGING FLEX-SHAFT SR CARVERS - 139-250. FOREDOM® 1/3HP HANGING FLEX-SHAFT TX CARVERS - 139-229. VANTEX 1/3HP HANGING FLEX-SHAFT CARVER - 115-754. ROTATING BURR HOLDER - 139-304.
|
|
|
|
Portable Power Tool Accessories - Carvers
|
YOU CAN GET FREEDOM FROM CLUTTER WITH FOREDOM® MOTOR HANGERS
|
| Bc-1 Bench Clamp Motor Hanger
...plus other(s)
|
A MOTOR HANGER WILL HELP KEEP YOUR FOREDOM® TX OR SR MOTOR AT A COMFORTABLE WORKING DISTANCE, YET PROVIDE MAXIMUM CONVENIENCE WHEN POWER CARVING:
MH-5 - BENCH CLAMP MOTOR HANGER TEMPORARILY CLAMPS TO ANY BENCH UP TO 2-1/4" THICK. MH-6 - SCREW BASE MOTOR HANGER BOLTS OR SCREWS ONTO BENCH SIDE OR TOP FOR PERMANENT MOUNTING. BOTH COME WITH A HANDPIECE REST THAT ALLOWS YOU TO SECURE YOUR HANDPIECE WHEN NOT IN USE - CUT OUT BACK CONVENIENTLY HOLDS THE MOTOR CORD AWAY FROM YOUR WORK. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FOREDOM® 5400 TX WOODCARVING KIT - 139-229. FOREDOM® 5240 SR WOODCARVING KIT - 139-250.
|
|
|
|
Portable Power Tool Accessories - Carvers
|
3/32" SHANK COARSE AND FINE CARVING BURRS ARE COLOR-CODED FOR PROPER APPLICATION
|
| Gold Sphere Burr 1/4"d X 1/4"l
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Carvers
|
SET OF ALL 7 BURRS
|
| Set Of All 7 Burrs
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Carvers
|
YOU CAN TURN YOUR ANGLE GRINDER INTO A POWER CARVER!
|
| Squire 12t Carving Blade
...plus other(s)
|
MOUNT ONE OF THESE UNIQUE CHAIN SAW CUTTERS ONTO YOUR 4" OR 4-1/2" ANGLE GRINDER (5/8" THREADED SHAFT) AND YOU'VE GOT A MULTI-DIRECTIONAL CARVER. BLADES FEATURE 1/4" CHAIN SAW SANDWICHED BETWEEN TWO STEEL DISCS AND ARE PERFECT FOR RAPID WOOD REMOVAL, CUTTING AND GENERAL SHAPING OF MANY KINDS OF MATERIALS:
LANCELOT® 45822 AND 45814, 22- AND 14-TEETH BLADES, ARE 4" DIA. SQUIRE® 35818 AND 35812, 18- AND 12-TEETH BLADES, ARE 3-1/2" DIA. USING 5/8" UNIVERSAL ARBOR NUT 13750, UP TO THREE BLADES CAN BE TANDEM-MOUNTED ONTO ONE ANGLE GRINDER (4-1/2" ONLY) FOR FASTER CUTTING. DON'T STOP A PROJECT TO SHARPEN YOUR CHAIN! SIMPLY FIT A LANCELOT® 40022 OR 40014, 22- OR 14-TEETH, OR SQUIRE® 30012, 12-TEETH, REPLACEMENT CHAIN AND SHARPEN THE DULL ONE AT YOUR CONVENIENCE (CHAINS NOT INTERCHANGEABLE WITH DIFFERENT-SIZE DISCS). NOTE: MANUFACTURER DOES NOT RECOMMENDED USING CHAIN SAW CUTTERS ON MAKITA® ANGLE GRINDERS. USA.
|
|
|
|
Portable Power Tool Accessories - Carvers
|
POWERCRAFTER® AIR TURBINE CARVING TOOL RUNS AT AN AMAZING 400,000 RPM
|
| Powercrafter Stand
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Carvers
|
HIGH SPEED DIAMOND BURRS ADD THE FINISHING TOUCH TO WOOD CARVINGS
|
| Diamond Burr Round
...plus other(s)
|
IF YOU'RE LOOKING FOR AN EASIER WAY TO PUT THE FINAL TOUCH ON YOUR CARVINGS, HIGH SPEED DIAMOND BURRS PROVIDE AN EXTREMELY SMOOTH FINISH:
COATED WITH A LAYER OF METAL BONDED INDUSTRIAL DIAMOND PARTICLES, DIAMOND BURRS CUT FAST AND ARE LONG LASTING, LEAVING A VERY SMOOTH FINISH. IN BIRD CARVING THEY ARE BEST SUITED FOR FEATHER DETAILING, TEXTURING, CONTOUR LINES, BILL DETAILS AND FEATHER UNDERCUTTING. 1/16" FRICTION GRIP SHANKS.
945-064 - 1MM HEAD ROUND. 945-071 - 1.4MM HEAD ROUND. 945-078 - 1.8MM HEAD ROUND. 945-085 - 2.3MM HEAD ROUND. 945-092 - 1.2MM HEAD FLAT END CYLINDER. 945-099 - 1.6MM HEAD ROUND FLAT END CYLINDER. 945-106 - 1.4MM HEAD FLAME. 945-113 - 1.8MM HEAD EGG. 945-120 - 1.3MM HEAD EGG. 945-127 - 1.6MM HEAD FOOTBALL. 945-134 - 1.4MM HEAD INVERTED CONE. 945-141 - 1.8MM HEAD ROUND INVERTED CONE. 945-148 - 1.8MM HEAD LONG ROUND END TAPER.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ROTATING BURR HOLDER - 139-304. POWERCRAFTER® AIR TURBINE CARVER - 932-929. PROXXON® ROTARY CARVER - 117-323. WOODTEK® 1/4HP FLEX-SHAFT CARVER - 876-768.
|
|
|
|
Portable Power Tool Accessories - Carvers
|
TOOL STEEL CARVING BURRS ARE TOUGH, YET AFFORDABLE
|
| 8mm Round Bur
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Carvers
|
ADD FINISHING TOUCHES TO WOOD CARVINGS WITH POLISHING BURRS
|
| Supra Green Round
...plus other(s)
|
IF YOU'RE LOOKING FOR AN EASIER WAY TO APPLY THE FINAL TOUCHES TO YOUR CARVINGS, POLISHING BURRS PROVIDE EXTREMELY SMOOTH FINISHES:
AVAILABLE IN TWO GRADES - SILICON CARBIDE SUPRA GREEN IS FOR CERAMIC, GOLD AND SILVER GRINDING. HIGH GRADE ALUMINUM OXIDE SUPRA WHITE IS USED FOR POLISHING. 1/16" FRICTION GRIP SHANKS.
946-722 - 3MM HEAD ROUND (SUPRA GREEN). 946-729 - 3MM HEAD ROUND (SUPRA WHITE). 946-736 - 3.5MM HEAD INVERTED CONE (SUPRA GREEN). 946-750 - 2.5MM HEAD TAPER (SUPRA GREEN). 946-757 - 2.5MM HEAD FLAME (SUPRA WHITE). 946-764 - 2MM HEAD FLAT END TAPER (SUPRA WHITE). 946-771 - 2.5MM HEAD FLAME (SUPRA GREEN). 946-778 - 2.5MM HEAD FLAME (SUPRA WHITE).
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Portable Power Tool Accessories - Carvers
|
SOLID CARBIDE ROTARY CARVING CHISELS REMOVE MATERIAL FASTER AND CLEANER THAN ANY OTHER METHOD
|
| 3/32" Gouge Rotary Chisel
...plus other(s)
|
ABSOLUTELY AMAZING FOR CARVING, DETAILING AND SMALL TOUCH UP WORK. CREATIVE TECHNOLOGIES, INC., SOLID CARBIDE ROTARY CARVING CHISELS EXCEL AT ALL APPLICATIONS INCLUDING DETAIL WORK, TEXTURES AND STOCK REMOVAL:
SELF CLEANING DESIGN MEANS NO TIME WASTED WHILE CHANGING TOOLS, PLUS A CLEANER CUT REQUIRING LESS TOUCH UP FOR A FINISHED SURFACE. SOLID CARBIDE WILL PROVIDE YEARS OF TOP PERFORMANCE. DESIGNED FOR HIGH SPEED ROTARY TOOLS (DREMEL®, ETC.) OR DIE GRINDERS WITH LARGER PROFILES. WORK EQUALLY WELL ON WOOD, MARBLE, LIMESTONE, STEATITE, ALABASTER, BRONZE, ALUMINUM - EVEN STAINLESS STEEL. UNIQUE TRIANGULAR SHAPE LETS YOU SEE WHERE YOU ARE CUTTING, PLUS IT DISSIPATES HEAT RAPIDLY (REFER TO DIAGRAMS FOR CUT PROFILES AND DIMENSIONS).
|
|
|
|
Portable Power Tool Accessories - Circular Saw
|
GET SUPER ACCURATE CUTS WITH A CIRCULAR SAW AND MITERMATE™
|
| Mitermate
|
CUT ACCURATE BEVELS, COMPOUNDS, MITERS AND 90° CUT OFFS WITH YOUR CIRCULAR SAW AND MITERMATE™:
EASY TO USE - SIMPLY SET DESIRED ANGLE, LOCK INTO POSITION, SET ON PIECE TO BE CUT AND RUN THE SAW ALONG THE GUIDE BAR. UNLIKE MANY COMPETITOR'S MODELS, WITH MITERMATE™ THE SAW RUNS STRAIGHT SO BINDING, KICKBACK, OVERHEATING AND BLADE DULLING ARE VIRTUALLY ELIMINATED. ADJUSTS TO FIT DIFFERENT BRANDS OF SAWS. LIGHTWEIGHT, YET EXTREMELY DURABLE, HIGH-IMPACT POLYCARBONATE AND STAINLESS STEEL. 13" X 13" X 1", WEIGHS 1-1/2 LBS. USA
|
|
|
|
Advanced Search Tools
Browse
will
