|
|
|
Machinery - Band Saws
|
STEEL CITY™ 14" BAND SAW HAS 2 SPEEDS AND COMES WITH LOADS OF CONVENIENT FEATURES
|
| 14" Band Saw 1-1/2hp 2 Speed
...plus other(s)
|
THE STEEL CITY™ 50100 14" DELUXE BAND SAW HAS THE FEATURES FOR VERY CONVENIENT OPERATION:
1-1/2HP, 115/230V, 1PH TEFC MOTOR W/MECHANICAL ON/OFF SWITCH - 1,500/3,000 SFPM. 13" BLADE TO FRAME 6-1/4" UNDER GUIDE (12" WITH OPTIONAL RISER BLOCK). 16" X 16" CAST IRON TABLE WITH MITER SLOT TILTS 48° RIGHT AND 10° LEFT. 93-1/2" STANDARD BLADE LENGTH, 1/8" TO 3/4" WIDTH. 7-1/2" MAXIMUM RIP RIGHT OF BLADE; 11-3/4" LEFT (USING OPTIONAL RIP FENCE). COMES WITH MOBILE BASE INTEGRATED INTO THE STAND, WHEEL BRUSH, WRENCHES AND INSTRUCTIONS. 68"H X 38"W X 27"D. 271 LBS. NET WEIGHT; 291 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
STEEL CITY™ STEEL FRAME INDUSTRIAL BANDSAWS OFFER 12" RESAW CAPACITY
|
| 18" Band Saw 2hp 1ph 2 Speed
...plus other(s)
|
STEEL CITY™ INDUSTRIAL BANDSAWS HAVE PLENTY OF POWER FOR EVEN THE TOUGHEST CUTTING OPERATIONS:
MODEL 50250 18" INDUSTRIAL BANDSAW: (SHOWN) 2HP, 230V, 1PH TEFC MOTOR W/MECHANICAL ON/OFF SWITCH - 1,850/3,100 SFPM. 18" BLADE TO FRAME - 10" MAXIMUM RIP RIGHT OF BLADE WITH RIP FENCE, 15-1/2" LEFT. 137" STANDARD BLADE LENGTH, 1-1/4" MAXIMUM WIDTH. 73"H X 39"W X 27"D. 450 LBS. NET WEIGHT; 510 LBS. SHIPPING WEIGHT.
MODEL 50300 20" INDUSTRIAL BANDSAW: 3HP, 230V, 1PH TEFC MOTOR W/MAGNETIC ON/OFF SWITCH - 2,100/3,450 SFPM. 20" BLADE TO FRAME - 11" MAXIMUM RIP RIGHT OF BLADE WITH RIP FENCE, 17-1/2" LEFT. 150" STANDARD BLADE LENGTH, 1-1/4" MAXIMUM WIDTH. 78"H X 40"W X 29"D. 536 LBS. NET WEIGHT; 596 LBS. SHIPPING WEIGHT.
20" X 20" CAST IRON TABLE TILTS 10° LEFT AND 48° RIGHT. 3/4" X 3/8" MITER SLOT. QUICK RELEASE BLADE TENSION LEVER FOR LESS BLADE FATIGUE AND LONGER BLADE LIFE. CAST IRON WHEELS, RESAW POST, 4" DUST PORT, WHEEL BRUSH, ADJUSTABLE BEARING GUIDES, WRENCHES AND INSTRUCTIONS INCLUDED. FIVE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
MILL YOUR OWN PRECISION DIMENSIONAL LUMBER USING A PERSONAL SAWMILL
|
| 15hp Personal Sawmill
...plus other(s)
|
IF YOURE A WOOD HOBBYIST OR CRAFTSMAN, YOU DONT NEED TO BUY BOARDS FROM THE LUMBERYARD ANYMORE. SURPRISINGLY EASY TO SET UP AND OPERATE, THE WOOD-MIZER® MODEL LT15 PERSONAL SAWMILL CAN HANDLE LOGS UP TO 28" DIA. AND VIRTUALLY ANY LENGTH:
15HP, ELECTRIC START, GASOLINE FUELED ENGINE. 158"L X 1.25"W X 0.042"T BLADE - CUTS 75-125 BD.FT./HR (102-983 BLADES MUST BE ORDERED SEPARATELY). HAND CRANK ADJUSTS CARRIAGE POSITION AND MOVES HEAD UP AND DOWN TO CHANGE BOARD THICKNESS (CUT TO WITHIN 1" OF BED). EXTENSIVE GUARDING ALONG WITH THE COMBINATION CLUTCH/BRAKE FOR OPERATOR SAFETY. INCLUDES TWO, 80" LONG BED SECTIONS WITH INTEGRAL LEVELERS THAT CAN HANDLE LOGS UP TO 11' LONG. 944 LBS. ASSEMBLED - OWNER'S MANUAL CONTAINS ASSEMBLY AND DISASSEMBLY INSTRUCTIONS SO SAWMILL CAN BE LOADED INTO A PICKUP BY TWO PEOPLE. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY. 102-977 - ANY NUMBER OF OPTIONAL BED SECTIONS CAN BE ADDED TO INCREASE CAPACITY - EACH 80" LONG SECTION WEIGHS 160 LBS. 102-980 - OPTIONAL PROPACKAGE INCLUDES INDUSTRIAL QUALITY ANTI-ROLLBACK LOG LOADING RAMPS, CANT HOOK AND LOG TAPER WEDGE. USA.
|
|
|
|
Machinery - Band Saws
|
PRECISION BLADE GUIDES AND CAST IRON TABLES HELP WOODTEK® 18", 20" AND 24" BAND SAWS RUN SMOOTHER
|
| 18" Band Saw 2hp 1ph 230v
...plus other(s)
|
WITH TWO SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, WOODTEK® BAND SAWS TRACK STRAIGHT AND RUN COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOTS AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN AND A QUICK RELEASE BLADE LATCH. FOOT BRAKES ARE LARGE AND EASY TO REACH, SO YOU CAN QUICKLY STOP THE BLADE. SAWBLADE, TIRE, MITER GAUGE, RIP FENCE, GUIDE RAIL, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. 4" DIA. DUST COLLECTION PORT AT THE LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WOODTEK® 18" BAND SAW: MOTOR - 2 HP, 230V, 9.6A, 1PH, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 3,000 FPM. BLADE SIZE - 144", 1/4" TO 1" WIDE (17-1/2" DIA. WHEEL). HEIGHT CAPACITY - 10". DEPTH CAPACITY - 17-1/2". TABLE SIZE - 25-5/8" X 18-1/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 72-3/4"H X 31-1/2"W X 28-1/2"D. SHIPPING WEIGHT - 558 LBS.
WOODTEK® 20" BAND SAW: MOTOR - 2 HP, 230V, 12A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,000 FPM. BLADE SIZE - 155", 3/8" TO 1" WIDE (20" DIA. WHEEL). HEIGHT CAPACITY - 12-7/16". DEPTH CAPACITY - 19-3/16". TABLE SIZE - 23" X 20-1/2"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 73-3/4"H X 34"W X 26"D. SHIPPING WEIGHT - 593 LBS.
WOODTEK® 24" BAND SAW: MOTOR - 5 HP, 230V, 25A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,600 FPM. BLADE SIZE - 177", 3/8" TO 1" WIDE (23-1/4" DIA. WHEEL). HEIGHT CAPACITY - 15-1/2". DEPTH CAPACITY - 23-1/4". TABLE SIZE - 29" X 22-3/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 80"H X 36"W X 28"D. SHIPPING WEIGHT - 753 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
WOODTEK® FOUR SPEED METAL/WOOD CUTTING BANDSAWS WILL PROVIDE YEARS OF SERVICE
|
| 15" 4-spd Wood/metal Band Saw
...plus other(s)
|
WOODTEK® 15" OR 18" FOUR SPEED METAL/WOOD CUTTING BANDSAWS WILL EASILY HANDLE FERROUS AND NON-FERROUS METALS AS WELL AS HARD AND SOFT WOODS - CLUTCH LEVER SWITCHES BETWEEN OPERATING MODES:
80 FPM (STEEL AND STEEL ALLOYS), 150 FPM (CAST IRON AND BRONZE), 200 FPM (ALUMINUM, BRASS AND COPPER) OR 2,800 FPM (WOODCUTTING). UPPER AND LOWER GUIDE PINS PROVIDE SAWBLADE SIDE SUPPORT THRUST BEARINGS SUPPORT REAR. SEPARATE BLADE TENSIONING AND BLADE TRACKING CONTROLS. HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOT AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. 14TPI METAL CUTTING AND 6TPI WOOD CUTTING SAWBLADES, TIRES, MITER GAUGE, RIP FENCE WITH KNOB, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
130-367 15" BANDSAW:
MOTOR - 1HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 111", 3/16" TO 3/4" WIDE (15" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 8-3/4". DEPTH CAPACITY - 14-5/8". TABLE SIZE - 15" X 15"; TILTS 5°L AND 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 68"H X 27"W X 22"D. NET WEIGHT - 302 LBS. SHIPPING WEIGHT - 353 LBS.
130-370 18" BANDSAW:
MOTOR - 1-1/2HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 133", 3/16" TO 1" WIDE (18" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-3/4". DEPTH CAPACITY - 17-3/4". TABLE SIZE - 18" X 19"; TILTS 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 75"H X 33"W X 24"D. NET WEIGHT - 344 LBS. SHIPPING WEIGHT - 400 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
PRECISION BLADE GUIDES AND CAST IRON TABLE KEEP THE WOODTEK® TWO SPEED 14" BANDSAW RUNNING SMOOTHER
|
| 14" Band Saw 1hp W/fence & Miter
...plus other(s)
|
WITH TWO UPPER AND TWO LOWER SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, THE WOODTEK® TWO SPEED 14" BANDSAW TRACKS STRAIGHT AND RUNS COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLE HAS 3/8" X 3/4" MITER SLOT AND OFFERS VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. AIR NOZZLE, SAWBLADE, URETHANE TIRES, MITER GAUGE, EXTRUDED ALUMINUM FENCE SYSTEM, WRENCHES AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1HP, 120V, 1PH, 10A, 1,750 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SPEED - 1,720 OR 2,900 FPM. BLADE SIZE - 93-1/2", 1/4" TO 3/4" WIDE (13-7/8" DIA. WHEELS). HEIGHT CAPACITY - 6". DEPTH CAPACITY - 13-1/2". TABLE SIZE - 16-1/16" X 16-1/2"; TILTS 13°L AND 50°R. DUST PORT - 2-1/4" DIA. OVERALL DIMENSIONS - 67"H X 29-1/2"W X 19-1/8"D. SHIPPING WEIGHT - 194 LBS.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw 1-1/2hp
...plus other(s)
|
"ONE SOLID MACHINE" AND "PURRED LIKE A KITTEN" ARE WORDS WOOD® MAGAZINE EDITORS USED TO DESCRIBE THE POWERMATIC® PWBS-14CS 14" BAND SAW:
1-1/2 HP, 115/230V, 1PH MOTOR - 3,000 SFPM. MICRO ADJUSTABLE, DUAL BEARING BLADE GUIDE SYSTEM ABOVE AND BELOW THE TABLE - 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. TWO PIECE CAST IRON TABLE HAS 5" X 15" TILTING (45° RIGHT, 10° LEFT) SECTION AND FIXED 15" X 5" EXTENSION - CHIP BLOWER ENSURES CLEAN, VISIBLE CUT LINE. TENSIONING GAUGE SETTINGS INDICATED IN "BLADE WIDTH" INCREMENTS CARTER QUICK RELEASE™ LEVER SPEEDS BLADE CHANGES. BALANCED, NINE SPOKE CAST IRON WHEELS RUN SMOOTHLY - POLY V-BELT MAXIMIZES POWER TRANSMISSION WHILE MINIMIZING NOISE AND VIBRATION. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. MITER GAUGE, 1/4" X 93-1/2" BLADE, 60 WATT HALOGEN WORK LIGHT, TOOL KIT AND INSTRUCTIONS INCLUDED. 68"H X 34"W X 20"L. 203 LBS. NET WEIGHT; 221 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® 20" AND 24" INDUSTRIAL BAND SAWS
|
| 24" 2415 Bandsaw 3hp 1ph 230v
...plus other(s)
|
TWO-SPEED POWERMATIC® MODEL 2013 20" AND MODEL 2415 24" INDUSTRIAL BAND SAWS CAN BE OPERATED AT 2,000 SFPM OR 4,000 SFPM TO TAKE FULL ADVANTAGE OF THEIR STANDARD AND RESAW CAPACITIES:
2, 3 OR 5 HP MOTOR - 1PH OR 3PH - 230V OR 230/460V WITH MAGNETIC ON/OFF SWITCH. SAWBLADE IS COMPLETELY GUARDED BUT EASILY ACCESSIBLE FOR CHANGING. CAST IRON WHEELS ARE EQUIPPED WITH VULCANIZED RUBBER TIRES - LOWER WHEEL BRUSH HELPS ELIMINATE SAWDUST BUILDUP. EASILY ACCESSIBLE HANDWHEELS AND CONTROLS. CONVENIENT FOOT BRAKE FOR RAPID STOPS. CAST IRON TABLE WITH 3/8" X 3/4" MITER SLOT TILTS 45° RIGHT, 10° LEFT. 4" DIA. DUST COLLECTION PORT (MINIMUM 600 CFM DUST COLLECTION REQUIRED). WORK LIGHT, RIP FENCE, MITER GAUGE, RAILS, WRENCH, HARDWARE AND INSTRUCTIONS INCLUDED.
MODEL 2013 20" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 12-3/8"/20". TABLE: 24" X 24". BLADE LENGTH/WIDTH: 158-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-1/4" TABLE HEIGHT X 34-1/4"W X 24"D. NET WEIGHT: 950 LBS. SHIPPING WEIGHT: 970 LBS.
MODEL 2415 24" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 14-3/8"/24". TABLE: 24" X 28". BLADE LENGTH/WIDTH: 180-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-3/8" TABLE HEIGHT X 39"W X 34-3/8"D. NET WEIGHT: 1,050 LBS. SHIPPING WEIGHT: 1,190 LBS.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 14" BAND SAWS
|
| 14' Band Saw, Closed Stand, 1hp
...plus other(s)
|
WITH ALL OF ITS FEATURES, THE JET® JWBS-14CS (708115K) 14" CLOSED STAND WOODWORKING BAND SAW WILL BE A WELCOME ADDITION TO YOUR SHOP:
1HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. MICRO ADJUSTABLE BLADE GUIDE WITH GRAPHITE IMPREGNATED JET BLOCKS™ FOR SMOOTHER RUNNING. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 15" X 15" CAST IRON TABLE TILTS 45°R AND 10°L. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. SIMILAR JWBS-14MW (708116K) 14" CLOSED STAND METALWORKING BAND SAW FEATURES THREE SPEEDS (735, 1,470, 2,350 SFPM) FOR NON-FERROUS METAL AND WOODWORKING APPLICATIONS. 68"H X 26"W X 19"D. 185 LBS. NET WEIGHT; 200 LBS. SHIPPING WEIGHT. JWBS-14OS (708113A) 14" OPEN STAND WOODWORKING BAND SAW FEATURES: 3/4HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 14" X 14" CAST IRON TABLE TILTS 45°R AND 15°L. 16GA STEEL STAND - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. 68"H X 24"W X 26-1/2"D. 172 LBS. NET WEIGHT; 187 LBS. SHIPPING WEIGHT.
5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
FROM GENERAL CUTTING TO RESAWING, JET® 16", 18" AND 20" WOODWORKING BAND SAWS CAN HANDLE IT ALL
|
| Jwbs-16b 16" Band Saw 1-1/2hp 1ph
...plus other(s)
|
JET® PROFESSIONAL WOODWORKING BAND SAWS FEATURE TRIANGULAR COLUMN AND STEEL STANDS FOR ROCK SOLID STABILITY:
BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. CAST IRON TABLES TILT 45°R AND 10°L. PUSH BUTTON, MECHANICAL ON/OFF SWITCH (JWBS-18X-3 AND JWBS-20 HAVE MAGNETIC SWITCHES).
JWBS-16B 16" BAND SAW 708749B: 1-1/2HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 10" DEPTH RESAW CAPACITY; 16-3/8" WIDE CUTTING CAPACITY. 17" X 17" TABLE. 123" SAWBLADE. 71"H X 22"W X 30-3/4"D. 310 LBS. NET WEIGHT; 345 LBS. SHIPPING WEIGHT.
JWBS-18QT 18" BAND SAW 710750B: 1-3/4HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 410 LBS. NET WEIGHT; 450 LBS. SHIPPING WEIGHT.
JWBS-18QT-3 18" BAND SAW 710751B: 3HP, 1PH, 230V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 460 LBS. SHIPPING WEIGHT.
JWBS-20QT-3 20" BAND SAW 708754B: 3HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
JWBS-20QT-5 20" BAND SAW 708755B: 5HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT AND MITER GAUGE (JWBS-16 EXCLUDED), 4TPI 3/4" WIDE SAWBLADE, 4" DUST PORT, FOOT BRAKE (JWBS-20 ONLY) AND INSTRUCTIONS INCLUDED. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
IT'S TOUGH TO MATCH THE JET® 18" WOODWORKING BANDSAW FOR FEATURES, QUALITY AND PRICE
|
| Jwbs-18qt 18" Band Saw 1-3/4hp 1ph
|
ONE OF THE MOST POPULAR JET® BANDSAWS, THE JWBS-18 18" WOODWORKING BANDSAW HAS EVERYTHING NEEDED TO RUN RIGHT OUT OF THE BOX:
1-1/2HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 10-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 133" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D; 320 LBS. NET WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 20" WOODWORKING BANDSAW IS POWERED BY A 2HP INDUSTRIAL STRENGTH MOTOR
|
| Jwbs-20qt-3 20" Band Saw 3hp 1ph
|
A TRUE CUTTING AND RESAWING WORKHORSE, THE JET® JWBS-20 20" WOODWORKING BANDSAW COMES WITH ALL OF THE FEATURES EXPECTED BY PROFESSIONAL OR SERIOUS AMATEUR WOODWORKERS - EVEN A FOOT BRAKE AS STANDARD EQUIPMENT:
2HP, 230V, 1PH TEFC MOTOR - 3,450 SFPM. PUSH BUTTON, MAGNETIC ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 20" FRAME TO BLADE CLEARANCE. 21" X 21" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 150" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 75"H X 22"W X 30-3/4"D; 500 LBS. NET WEIGHT. LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 18" WOODWORKING BANDSAW WITH ROLLER GUIDES
|
| Jwbs-18qt-3 18" Band Saw 3hp 1ph
...plus other(s)
|
THE JET® JWBS-18X-3 18" WOODWORKING BANDSAW HAS BIG-MACHINE CAPACITY WITH A FOOTPRINT SLIGHTLY LARGER THAN A 14" MACHINE:
3HP, 230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 137" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 435 LBS. SHIPPING WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
WOODTEK® 17" BANDSAWS HAS 2 SPEEDS AND BALL BEARING BLADE GUIDES
|
| 17" Band Saw 2hp 1ph 120/230v
|
THE WOODTEK® 17" BANDSAW TRACKS STRAIGHT AND RUNS COOL - A THIRD BEARING IN THE UPPER AND LOWER BLADE GUIDES SUPPORTS THE BACK OF THE SAWBLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
UPPER BLADE GUIDE IS ON A RACK-AND-PINION SYSTEM FOR GREATER ACCURACY. HEAVY CAST IRON TABLE, WITH 3/8" X 3/4" MITER "T" SLOT, OFFERS VIBRATION-FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. DUST PORT AT LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. SAWBLADE, REMOVABLE BLADE INSERT, RUBBER TIRES, LOWER WHEEL WIPER, MITER GAUGE, WRENCHES, HARDWARE AND INSTRUCTIONS INCLUDED. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 2HP, 120/240V, 8A/4A, 1PH, 1,720 RPM - "V" BELT DRIVE. ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SPEED - 1,800 FPM/2,800 FPM. BLADE SIZE - 130-1/2", 1/4" TO 1-3/8" WIDE (14-3/4" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-1/2". THROAT CAPACITY - 17-5/16". TABLE SIZE - 18" X 19"; TILTS 45°R AND 13°L. FENCE - 3-5/8"H X 18"L. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 84"H X 38"W X 30"D. NET WEIGHT - 350 LBS. SHIPPING WEIGHT - 404 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
DELTA® INDUSTRIAL 14" BANDSAW POWERED BY 1HP MOTOR
|
| 14" Band Saw 1hp Enclosed Base
|
THE DELTA® MODEL 28-206 INDUSTRIAL 14" BANDSAW FEATURES VALUE AND A PROGRESSION OF FEATURES FOR ALL USERS - ENCLOSED STAND, 9-SPOKE WHEELS, BLADE GUARD, BELT GUARD, V-BELT, MOTOR PULLEY, BLADE GUIDES, A 93-1/2"L WOOD-CUTTING BLADE AND COMPLETE INSTRUCTIONS:
120VAC, 1HP, 1PH MOTOR. 2,500/3,000 SFPM CUTTING CAPACITY. 6-1/4" CAPACITY UNDER GUIDE - 13-3/4" THROAT DEPTH. LOWER BLADE GUIDES ANGLED TO SUPPORT BLADE WITHIN 3/4" OF TABLE AND INCLUDES MICROMETER ADJUSTMENT FOR ACCURATE SETTINGS. 16" X 16" CAST IRON TABLE TILTS 45° RIGHT AND 3° LEFT ON CAST IRON TRUNNIONS. BLADE CHANGES MADE SIMPLE BY QUICK TENSION RELEASE LEVER. 4" DIA. DUST COLLECTION PORT. 65-1/2"H X 31"W X 17-1/2"D. WEIGHS 201 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED. 50-239 - OPTIONAL CONNECTOR REPLACES EXISTING BANDSAW DUST SPOUT. 5" DIA.
|
|
|
|
Machinery - Band Saws
|
DELTA® INDUSTRIAL 14" 3/4HP OPEN- AND 1HP CLOSED-STAND BAND SAWS
|
| 14" Band Saw 3/4hp Open Stand
...plus other(s)
|
DELTA® INDUSTRIAL 14" BAND SAWS FEATURE CAST IRON TRUNNIONS THAT SUPPORT A 16" X 16" CAST IRON TABLE THAT TILTS 45°, RIGHT, AND, 3°, LEFT FOR BEVELING OPERATIONS:
28-276 3/4HP 14" OPEN STAND BAND SAW - 3,000 SFPM CUTTING CAPACITY: 28-206 1HP 14" CLOSED STAND BAND SAW - 2,500/3,000 SFPM CUTTING CAPACITIES:
120/240VAC, 1PH, TEFC MOTOR WITH MECHANICAL ON/OFF SWITCH. 94" MAXIMUM BLADE LENGTH; 3/4" MAXIMUM WIDTH - 6-1/4" CAPACITY UNDER GUIDE; 13-3/4" THROAT DEPTH. LOWER BLADE GUIDES HAVE SAFE, ACCURATE, MICROMETER ADJUSTMENT AND ARE ANGLED TO SUPPORT THE BLADE TO WITHIN 3/4" OF THE TABLE. WOOD CUTTING BLADE, 4" DUST PORT, GUARDS, ARBOR, MOTOR PULLEYS AND V-BELT, 9 SPOKE WHEELS, RAPID-RELEASE™ TENSION LEVER, BLADE GUIDES AND INSTRUCTION MANUAL INCLUDED. 65-1/2"H X 31"W X 17-1/2"D. 201 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
DELTA X5™ 14" BAND SAW INCLUDES ENCLOSED STAND
|
| X5 14" Bandsaw 1-1/2hp Closed Base
...plus other(s)
|
CUT GRACEFUL CURVES, RESAW HARDWOODS OR MAKE COMPOUND CUTS WITH THE DELTA X5™ MODEL 28-475X 14" BAND SAW:
115/230VAC, 1-1/2HP, 1PH, 3,000 SFM MOTOR. STANDARD 93-1/2" X 1/4" BLADE - 13-3/4" BLADE TO FRAME CAPACITY, 6-1/4" UNDER GUIDE AND WHEEL. 16" X 16" TABLE WITH 45° RIGHT TILT, 9° LEFT - 3/8"D X 3/4"W MITER GAUGE GROOVE. INCLUDES PUSH BUTTON SWITCH, CHIP CHUTE, BLADE AND BELT GUARDS, ARBOR AND MOTOR PULLEYS, V-BELT, BLADE GUIDES, PLATINUM PRO® BAND SAW BLADE, QUICK RELEASE BLADE TENSION LEVER, INTEGRATED 4" DUST PORT AND INSTRUCTIONS. 65-1/2"H X 17-1/2"D X 25"W. 275 LBS. NET WEIGHT; 310 LBS. SHIPPING WEIGHT. USA. OPTIONAL 5" DIA. DUST CONNECTOR REPLACES EXISTING BAND SAW DUST SPOUT.
|
|
|
|
Machinery - Band Saws
|
HITACHI® 14-1/2" BANDSAW FEATURES 3" WIDE BLADE FOR PRECISION RESAWING
|
| Cb75f 14-1/2" Bandsaw
...plus other(s)
|
RESAWING VALUABLE WOOD IS FASTER AND MORE ACCURATE WITH THE LARGE BLADE CAPACITY OF THE HITACHI® CB 75F RESAW BANDSAW COMBINED WITH THE SAW'S 11-3/16" MAXIMUM CUTTING HEIGHT:
2.8HP, 120VAC, 15A, 1PH MOTOR - 900 RPM. HAND BRAKE NEXT TO START AND STOP BUTTONS FOR EXTRA SAFETY. 20-1/2" X 19-1/4" CAST IRON TABLE TILTS 45° AND HAS MITER GAUGE GROOVE. RACK AND PINION FENCE ADJUSTMENT PROVIDES SMOOTH OPERATION AND ACCURACY. ACCEPTS BLADES 1/4" TO 3" WIDE. ALL-STEEL BODY WITH BUILT-IN 4" DIA. DUST PORT. INCLUDES DURABLE 3" WIDE STELLITE® BLADE, GUIDE ASSEMBLY, TWO DOUBLE-END WRENCHES, BOX WRENCH, HEX BAR WRENCH, 6-1/2' LONG GROUNDED POWER CORD WITH PLUG AND INSTRUCTION MANUAL. 60"H X 37"W X 29"D, WEIGHS 308 LBS - DESIGNED FOR FLOOR MOUNTING. FIVE-YEAR MANUFACTURER'S WARRANTY. JAPAN.
HITACHI® CB 75F BANDSAW REPLACEMENT BLADES:
939-971 - 3" X 111.8" X 0.023" STELLITE® BLADE (12 TPF). 967-701 - 3" X 111.8" X 0.023" ALTERNATE-TOOTH STELLITE® BLADE (16 TPF). 921-705 - 1" X 110.75" X 0.025" SWAGED STEEL BLADE (24 TPF). 921-712 - 1/2" X 110.75" X 0.025" SWAGED STEEL BLADE (35 TPF). 921-719 - 1/4" X 110.75" X 0.025" SWAGED STEEL BLADE (48 TPF). 923-537 - 1" BLADE GUIDE (REQUIRED FOR 1" BLADE USE). 923-544 - 1/4" AND 1/2" BLADE GUIDE (REQUIRED FOR 1/4" AND 1/2" BLADE USE).
|
|
|
|
Machinery - Band Saws
|
DELTA X5™ 14" BANDSAW INCLUDES ENCLOSED STAND
|
| Set - 28-475x Bandsaw W/ Free Mobile Base
...plus other(s)
|
CUT GRACEFUL CURVES, RESAW HARDWOODS OR MAKE COMPOUND CUTS WITH THE DELTA X5™ MODEL 28-475X 14" BANDSAW:
115/230VAC, 1-1/2HP, 1PH, 3,000 SFM MOTOR. STANDARD 93-1/2" X 1/4" BLADE - 13-3/4" BLADE TO FRAME CAPACITY, 6-1/4" UNDER GUIDE AND WHEEL. 16" X 16" TABLE WITH 45° RIGHT TILT, 9° LEFT - 3/8"D X 3/4"W MITER GAUGE GROOVE. INCLUDES PUSH BUTTON SWITCH, CHIP CHUTE, BLADE AND BELT GUARDS, ARBOR AND MOTOR PULLEYS, V-BELT, BLADE GUIDES, PLATINUM PRO® BANDSAW BLADE, QUICK RELEASE BLADE TENSION LEVER, INTEGRATED 4" DUST PORT AND INSTRUCTIONS. 65-1/2"H X 17-1/2"D X 25"W. WEIGHS 275 LBS. USA. 50-239 - OPTIONAL 5" DIA. CONNECTOR REPLACES EXISTING BANDSAW DUST SPOUT.
|
|
|
|
Machinery - Boring
|
FOOT PEDAL CONTROLS KREG™ FULLY AUTOMATIC, PRO SERIES POCKET HOLE MACHINES
|
| Pocket Hole Machine (floor Electr)
...plus other(s)
|
BUILT TO RUN DAY AFTER DAY IN HARSH PRODUCTION ENVIRONMENTS, THE SINGLE SPINDLE KREG™ DK1100 PRO SERIES POCKET HOLE MACHINE OPERATES WITH A TAP OF A FOOT PEDAL - WORKPIECES ARE SIMPLY MOVED BACK AND FORTH ACROSS THE SPINDLE TO DRILL MULTIPLE HOLES:
DK1100 FE ELECTRIC - 1-1/2 HP, 120VAC, 1PH MOTOR - 1 CFM @ 90 PSI REQUIRED FOR HOLDDOWN; 176 LBS. NET WEIGHT. DK1100 FP PNEUMATIC - 1-1/4 HP - 8 CFM @ 50% DUTY CYCLE (90-120 PSI); 138 LBS. NET WEIGHT. RELIABLE "ONE STEP" CLAMPING/DRILLING OPERATION (4" CLAMPING CAPACITY) - 3/8" DIA. STEP DRILL BIT PRODUCES POCKET HOLES WITH FLAT BOTTOMS, SO SCREWS SEAT FLUSH, AND ROUND SIDES, SO HOLES CAN BE PLUGGED WITH DOWELS, IF DESIRED (DOWELS NOT INCLUDED). ADJUSTABLE STOPS SIMPLIFY MATERIAL POSITIONING - HINGED TOP ALLOWS EASY ACCESS TO DRILL BIT AND MOTOR. COMES WITH FOOT PEDAL, AIR HOSES WITH FITTINGS, POWER CORD WITH PLUG AND INSTRUCTIONS. 50"H X 24"W X 24"D. ONE YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery - Boring
|
BORE CABINET PARTS AND INSERT ALL TYPES OF BLUM® HARDWARE
|
| Minipress Boring Machine 220v/1ph
...plus other(s)
|
THE BLUM® MINIPRESS P IS AN EASY TO USE MACHINE, DESIGNED FOR BORING ALL HINGE AND MOUNTING PLATE SYSTEMS, METABOX™ FRONT FIXING BRACKETS AND 32MM LINE BORING FOR CABINET SIDES USING AN OPTIONAL SEVEN SPINDLE LINE BORING HEAD:
220V, 1PH MOTOR - 220V, 3PH AVAILABLE AS A SPECIAL ORDER. SPINDLE CONFIGURATION IS ADJUSTED BY A 90° ROTATION OF THE HEAD. ONE SETTING IS DEDICATED TO THE BLUM® HINGE BORING PATTERN. PRESET DEPTH POSITIONS AND ADJUSTABLE FENCE STOPS MAKE SETUPS SIMPLE. THE MACHINE FEATURES A FIVE SPINDLE SWIVELING HEAD, PNEUMATIC MOISTURE TRAP, ADJUSTABLE STROKE AND BORING DEPTH, PNEUMATIC HOLD DOWN CLAMPS, SWING ARM FOR INSERTION RAM, DUST EVACUATION JET AND DUST COLLECTION ADAPTER. WORK TABLE, CENTER RULER, FOUR RULER STOPS, TWO FIXED BORING DEPTH STOPS, REPLACEMENT BREAKAWAY CLUTCH AND TOOL KIT INCLUDED. OPTIONAL INSERTION RAMS ARE AVAILABLE FOR MOST COMPONENTS. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
|
|
|
|
Machinery - Boring
|
POWERMATIC® CBM21 LINE BORING MACHINE PROVIDES BOTTOM TO TOP DRILLING
|
| Cbm21 Cabinet Line Boring Machine
...plus other(s)
|
THE POWERMATIC® CBM21 21 SPINDLE LINE BORING MACHINE FEATURES A FULLY ADJUSTABLE BORING HEAD WITH DIGITAL READOUT THAT CAN DRILL VERTICALLY OR HORIZONTALLY AND LOCK AT ANY ANGLE IN BETWEEN:
2-1/2HP, 230V, 1PH MOTOR STARTS ONLY WHEN PNEUMATIC FEED CYCLE IS ACTIVATED BY THE FOOT PEDAL (90 PSI AIR SUPPLY REQUIRED). SIX POSITION TURRET STOP MAKES DRILLING DEPTH ADJUSTMENTS SIMPLE. CLAMP BAR WITH "GRIP TITE" SURFACE ENSURES PNEUMATIC WORK HOLD DOWNS STAY IN POSITION. 0-3-1/8" DRILLING DEPTH STROKE - 32MM BETWEEN CENTERS. 6" DEEP THROAT. 3,450 RPM SPINDLE SPEED. REQUIRES 11 RIGHT- AND 10 LEFT-HAND BORING BITS (NOT INCLUDED). 17-1/4" X 35" TABLE. 60" ADJUSTABLE BACKFENCE WITH FOUR FLIP STOPS LOCATES MATERIAL WITH PRECISION. COMES WITH TWENTY-ONE 10MM QUICK CHUCKS, TWO ADJUSTABLE FENCES FOR SMALL AND LARGE PANELS, FOOT PEDAL, TOOL KIT AND INSTRUCTIONS. 48"H X 31"W X 49"L. 682 LBS. NET WEIGHT; 841 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
POWERMATIC® LBM21 LINE BORING MACHINE
|
| Lbm21 Line Boring Machine
...plus other(s)
|
THE POWERMATIC® MODEL LBM21 21 SPINDLE LINE BORING MACHINE IS A SINGLE ROW LINE DRILL IDEAL FOR DRILLING SHELF SUPPORT HOLES, DRAWER SLIDE HOLES AND HINGE BASE PLATE HOLES:
2-1/2HP, 230V, 1PH MOTOR STARTS ONLY WHEN PNEUMATIC FEED CYCLE IS ACTIVATED BY THE FOOT PEDAL (90 PSI AIR SUPPLY REQUIRED). 0-2" DRILLING DEPTH STROKE - 32MM BETWEEN CENTERS. 6" DEEP THROAT. 3,450 RPM SPINDLE SPEED. REQUIRES 11 RIGHT- AND 10 LEFT-HAND BORING BITS (NOT INCLUDED). 19" X 47-1/4" TABLE. 60" FENCE WITH FOUR FLIP STOPS LOCATES MATERIAL WITH PRECISION. TWO MANUAL, HEAD-MOUNTED INDEX PINS PROVIDE PRECISE POSITIONING OF LONGER STOCK. COMES WITH TWENTY-ONE 10MM QUICK CHUCKS, FOOT PEDAL, ADJUSTABLE BACKFENCE AND INSTRUCTIONS. 63"H X 24"W X 49"L. 340 LBS. NET WEIGHT; 526 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
KREG™ SEMI-AUTOMATIC POCKET HOLE MACHINE...WHEN IT'S TIME TO MOVE UP
|
| Pneumatic Pocket Hole Machine
...plus other(s)
|
IF YOUR PRODUCTION NEEDS HAVE OUTPACED MANUAL JIGS, IT MIGHT BE TIME TO CONSIDER THE ADDED SPEED AND CONVENIENCE OF THE KREG™ SEMI-AUTOMATIC FOREMAN:
DB55 PNEUMATIC FEATURES A 3/4HP PNEUMATIC MOTOR, AUTOMATIC AIR CLAMPING - 90-120 RECOMMENDED PSI; 5.3 CFM @ 90 PSI MINIMUM COMPRESSOR CAPACITY. DB110 ELECTRIC IS ENTIRELY ELECTRIC NO COMPRESSED AIR REQUIRED. LEVER OPERATED - ONE-SECOND CYCLE TIME. 3/8" DIA. STEP BIT PRODUCES FLAT BOTTOM, ROUND SIDED POCKET HOLES SO SCREW HEADS SEAT FLUSH AND HOLES CAN BE PLUGGED. 1/2" TO 1-1/2" MATERIAL CAPACITY. STABLE WORK SURFACE HAS EASILY ADJUSTABLE "SWING-STOP" MATERIAL POSITIONING GUIDES. HINGED TOP ALLOWS EASY ACCESS TO DRILL BIT AND MOTOR. 6-3/4"H (19" INCLUDING HANDLE) X 13-5/8"W X 22-5/8"D. 35 LBS. NET WEIGHT; 40 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. USA
|
|
|
|
Machinery - Boring
|
COMPACT BORING MACHINE FOR BLUM® HARDWARE
|
| Minipress M Manual/110v
|
FLEXIBLE ENOUGH FOR THE SHOP OR ON-SITE, THE BLUM® MINIPRESS M IS DESIGNED FOR BORING ALL HINGE AND MOUNTING PLATE SYSTEMS, METABOX AND TANDEMBOX FRONT FIXING BRACKETS, METABOX C-15 DRAWER COMPONENTS AND 3 HOLE LINE BORING OF CABINET SIDES:
120V, 1PH MOTOR - PRESSURIZED AIR IS NOT REQUIRED. FIVE SPINDLE SWIVELING HEAD - ONE POSITION DEDICATED TO THE BLUM® 3-HOLE HINGE BORING PATTERN. BORING DEPTH IS SET USING AN ADJUSTMENT WHEEL. EXACT DRILLING DIMENSION SETTING IS FIXED USING A LOCK HANDLE. WORK TABLE, CENTER RULER, FOUR RULER STOPS, TWO FIXED BORING DEPTH STOPS, REPLACEMENT BREAKAWAY CLUTCH AND TOOL KIT INCLUDED. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
|
|
|
|
Machinery - Boring
|
POCKET HOLES ARE TWICE AS FAST WITH THE KREG™ PRO SERIES MULTI-SPINDLE DK3100
|
| Dk3100 Pro Series Multi Spindle
|
THE KREG™ PRO SERIES MULTI-SPINDLE DK3100 POCKET HOLE MACHINE GIVES YOU THE OPTION OF THREE DIFFERENT ON-CENTER SPINDLE SPACINGS - 3/4", 1" AND 1-3/4" - TO FIT TODAY'S MOST COMMON FACE FRAME WIDTHS:
1-1/2 HP, 120VAC, 1PH MOTOR - 1 CFM @ 90 PSI REQUIRED FOR HOLDDOWN. RELIABLE "ONE STEP" CLAMPING/DRILLING OPERATION (4" CLAMPING CAPACITY). THREE STEP DRILL BITS ARE UTILIZED, ONE OF WHICH IS LEFT-HANDED. ADJUSTABLE STOPS SIMPLIFY MATERIAL POSITIONING - HINGED TOP ALLOWS EASY ACCESS TO DRILL BIT AND MOTOR. COMES WITH FOOT PEDAL, AIR HOSES WITH FITTINGS, POWER CORD WITH PLUG AND INSTRUCTIONS. 50"H X 24"W X 24"D; 179 LBS. ONE YEAR MANUFACTURER'S WARRANTY. USA
|
|
|
|
Machinery - Boring
|
KREG™ PRO SERIES PANEL BORING MACHINE
|
| Dk5100 Boring Machine 5 Spindle
|
THE KREG™ PRO SERIES DK5100 PANEL BORING MACHINE CONTAINS 5 SEPARATE DRILL MOTORS MOUNTED 6" ON-CENTER - EACH CAN BE INDIVIDUALLY ACTIVATED SO YOU CAN DRILL ONE TO FIVE POCKET HOLES AT THE SAME TIME:
3/4 HP PNEUMATIC MOTORS - 20 CFM AT 50% DUTY CYCLE (90-120 PSI). PREFILTER AND AUTOMATIC LUBRICATOR INCLUDED. RELIABLE "ONE STEP" CLAMPING/DRILLING OPERATION (4" CLAMPING CAPACITY). ADJUSTABLE STOPS SIMPLIFY MATERIAL POSITIONING - HINGED TOP ALLOWS EASY ACCESS TO DRILL BIT AND MOTOR. COMES WITH FOOT PEDAL, AIR HOSES WITH FITTINGS, POWER CORD WITH PLUG AND INSTRUCTIONS. 50"H X 36"W X 24"D; 350 LBS. ONE YEAR MANUFACTURER'S WARRANTY. USA
|
|
|
|
Machinery - Boring
|
DELTA® 13 SPINDLE LINE BORING MACHINE
|
| 13 Spindle Line Boring Machine
...plus other(s)
|
THE DELTA® 32-325 13 SPINDLE BORING MACHINE PROVIDES A FULL 12" OF WORK SPACE IN FRONT OF THE BORING HEAD TO HANDLE EXTRA-LARGE BOARDS:
3/4HP, 120V, 1,725 RPM, 1PH MOTOR. SEE-THROUGH SPINDLE GUARD FOR SAFETY - 10MM COLLETS, 4" THROAT CAPACITY. ADJUSTABLE DEPTH STOP CONTROLS THE 2" DOWNWARD TRAVEL. TELESCOPING HANDLE EXTENDS FROM 16" TO 23" FOR INCREASED LEVERAGE - RETRACTS WHEN NOT IN USE. FULLY ADJUSTABLE 16" X 29-3/4" TABLE AND FENCE HAVE ENGLISH AND METRIC SCALES FOR QUICK SET-UP AND ACCURATE BORING. INDEXING PINS HELP MAINTAIN CORRECT SPINDLE ALIGNMENT FOR RESUMING LINE BORING OPERATIONS IN LONG WORKPIECES. WORK STOPS ON EITHER END OF THE FENCE ALLOW YOU TO LINE UP WORK FROM THE LEFT OR RIGHT FOR PERFORMING PARALLEL BORING PATTERNS. STEEL SUPPORT STRUCTURE AND BASE - PRE-DRILLED FOR BENCH OR STAND MOUNTING (STAND SOLD SEPARATELY). 32-1/2"H X 30"W X 28-1/2"L. NET WEIGHT 98 LBS.; 125 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. USA. SEVEN RIGHT-HAND (RH) AND SIX LEFT-HAND (LH) 5MM BRADPOINT BORING BITS REQUIRED (SOLD SEPARATELY). OPTIONAL FENCE EXTENSION ADDS 30" TO EXISTING FENCE.
|
|
|
|
Machinery - Boring
|
DELTA® 32-350 HORIZONTAL BORING MACHINE
|
| Horizontal Boring Mach, 2 Spindle
...plus other(s)
|
MANUFACTURED FOR CABINET AND FURNITURE SHOPS, THE DELTA® MODEL 32-350 HORIZONTAL BORING MACHINE PERFORMS REPETITIVE OPERATIONS, QUICKLY AND EASILY:
1HP, 115/230V (WIRED 230V), 1PH, 3,450 RPM MOTOR - REQUIRES 90 PSI FOR OPERATION. 8-1/2" MAXIMUM MATERIAL THICKNESS. 3-7/8" HEAD TRAVEL; 3-1/2" TABLE TRAVEL TO CENTER OF BIT. SPINDLE ACCEPTS 7/16"-14 RH TPI. HEAVY 15-3/4" X 9-7/8" CAST IRON TABLE HAS DOVETAILED WAYS WITH AN ADJUSTABLE GIB. MITER GAUGE, ADJUSTABLE HOLD DOWN CLAMP WITH SEE-THROUGH GUARD, ADJUSTABLE STOCK STOP, ADJUSTABLE BORING HEAD, DRILL BIT ADAPTER, FOOT PEDAL, STEEL CABINET, DUST CHUTE, WRENCHES AND INSTRUCTION MANUAL INCLUDED. 48"H X 15-3/4"W X 37-1/2"L. 303 LBS. NET WEIGHT; 350 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED
|
|
|
|
Machinery - Boring
|
SET - WOODTEK 3 HOLE BORING MACHINE
|
| Set - Woodtek 3 Hole Boring Machine
...plus other(s)
|
WITH A TWO OR THREE HOLE HEAD, A WOODTEK® HORIZONTAL BORING MACHINE HAS SEVERAL FEATURES THAT PUT IT WAY AHEAD OF OTHERS IN TERMS OF PERFORMANCE FOR THE MONEY:
INFINITELY ADJUSTABLE CENTERS PROVIDE MAXIMUM VERSATILITY. CAST IRON TABLE WITH MITER GAUGE T-SLOTS ADJUSTS UP AND DOWN FOR VARYING STOCK THICKNESS. PNEUMATIC CLAMP ACTS SEQUENTIALLY WITH DRILLING HEAD FOR FATIGUE FREE OPERATION - FOOT SWITCH OFFERS HANDS FREE OPERATION. ENCLOSED FENCE MAKES REPETITIVE BORING ACCURATE AND EASY. INCLUDES METAL STAND, FOOT SWITCH, MITER GAUGE, TOOLS, HARDWARE AND COMPLETE INSTRUCTIONS. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS
MOTOR - 2HP, 230V, 12A, 1PH (5-1/2 POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. SPINDLE SPEED - 2,900 RPM. STROKE - 3-1/8. TWO HOLE HEAD ADJUSTMENT - 0.70" TO 2.91" CENTERS. THREE HOLE HEAD ADJUSTMENT - 0.787" TO 3.78" CENTERS. TABLE SIZE - 9-7/8 X 15-3/4. FENCE SIZE - 4-1/4 X 4-3/4. OVERALL DIMENSIONS - 47-1/4"H X 15-3/4"W X 37"D. NET WEIGHT - 264 LBS. SHIPPING WEIGHT - 319 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
4-1/2"L HIGH SPEED STEEL BRADPOINT BITS (RIGHT HAND THREAD; THREADED SHANK) 801-894. 4-1/2"L CARBIDE TIPPED BRADPOINT BITS (RIGHT HAND THREAD; THREADED SHANK) 801-917. WOODTEK® TWO HOLE BORING HEAD ONLY 820-781. WOODTEK® THREE HOLE BORING HEAD ONLY 811-723.
|
|
|
|
Machinery - Boring
|
SAVE UP TO 50% IN FRAME PRODUCTION TIME WITH RITTER MANUFACTURING ASSEMBLY SYSTEMS
|
| R-215 Frame Assembly System W/tub
...plus other(s)
|
|
|
|
Machinery - Drill Presses
|
FULL 6" STROKE MAKES THE STEEL CITY™ 17" DRILL PRESS STAND OUT
|
| 17" Drill Press 3/4hp 16 Speed
...plus other(s)
|
WITH ITS SPLIT HEAD CASTING DESIGN, THE STEEL CITY™ 20520 17" DRILL PRESS GIVES YOU THE ABILITY TO COMPENSATE FOR WEAR AND ENSURE QUILL ACCURACY OVER THE LIFE OF THE MACHINE:
3/4HP, 115/230VAC, 10/5A, 1PH, 1,725 RPM MOTOR - 16 SPEEDS (215-2,720 RPM); 5/8" CHUCK W/QUILL LOCK. RACK AND PINION RAISING/LOWERING MECHANISM. 3-1/8" COLUMN DIA.; #2 MT; 24" CHUCK TO TABLE; 43-3/4" CHUCK TO BASE. EXTERNAL MICRO-ADJUSTABLE DEPTH STOP IS EASILY ACCESSIBLE FOR FASTER, MORE ACCURATE DEPTH ADJUSTMENTS FOR REPETITIVE DRILLING. 12" X 12" CAST IRON TABLE TILTS 90°, LEFT AND RIGHT. INCLUDES STEP PULLEYS, POLY V-BELTS, CHUCK KEY, DRIFT KEY, LAMP ATTACHMENT (BULB NOT INCLUDED) AND INSTRUCTION MANUAL. 69"H X 14"W X 27"D. NET WEIGHT 227 LBS.; 251 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
WOODTEK® 10" BENCH TOP DRILL PRESS - HIGH QUALITY, REASONABLE PRICE
|
| 10" Bench Top Drill Press 5 Speed
|
WITH ITS THREE SPOKE WHEEL, TILTING CAST IRON TABLE (0° TO 45°, LEFT AND RIGHT), LOCKING HEIGHT ADJUSTMENTS AND QUIET "V" BELT DRIVE MOTOR, THE WOODTEK® 10" BENCH TOP DRILL PRESS OFFERS REAL VALUE FOR MONEY SPENT:
MOTOR - 1/2HP, 120V, 9.4A, 1PH, 1,720 RPM. SPEEDS (5) - 720, 1,070, 1,620, 2,360 AND 3,250 RPM. CHUCK - 1/2"; JT33 SPINDLE TAPER. SWING - 10-1/8". STROKE - 1-15/16". TABLE SIZE - 6-1/2" X 6-1/2". OVERALL DIMENSIONS - 29-1/2"H X 10"W X 19-1/2"D. NET WEIGHT - 62 LBS. SHIPPING WEIGHT - 67 LBS.
NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Drill Presses
|
WOODTEK® 8" DRILL PRESS PROVIDES THE STRENGTH AND STABILITY OF A MACHINE COSTING MUCH MORE
|
| 8" Bench Top Drill Press 5 Speed
|
WITH ITS THREE SPOKE WHEEL, TILTING CAST IRON TABLE (0° TO 45°, LEFT AND RIGHT), LOCKING HEIGHT ADJUSTMENTS AND QUIET "V" BELT DRIVE MOTOR, THE WOODTEK® 8" BENCH TOP DRILL PRESS OFFERS REAL VALUE FOR MONEY SPENT:
MOTOR - 1/4HP, 120V, 5.9A, 1PH, 1,720 RPM. SPEEDS (5) 720, 1,070, 1,620, 2,360 AND 3,250 RPM. CHUCK - 1/2"; JT33 SPINDLE TAPER. SWING - 8-1/8". STROKE - 1-15/16". TABLE SIZE - 8-3/16" X 8-1/16". OVERALL DIMENSIONS - 23-1/4"H X 9-1/2"W X 17"D. NET WEIGHT - 37 LBS. SHIPPING WEIGHT - 42 LBS.
NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Drill Presses
|
PROXXON THREE SPEED BENCH DRILL PRESS CAN DRILL HOLES AS SMALL AS 0.02"
|
| Bench Top Drill Press
...plus other(s)
|
THE IDEAL MACHINE FOR PRECISE DRILLING, THE PROXXON MODEL 38 128 THREE SPEED BENCH DRILL PRESS CAN CUT THE SMALLEST DIAMETER HOLES WITH EXTREMELY HIGH ACCURACY:
120V MOTOR USES ALUMINUM PULLEYS AND FLAT BELT FOR 1,800, 4,700 AND 8,500 RPM SPINDLE SPEEDS. DIE CAST ALUMINUM WITH HARD CHROMED STEEL COLUMN; ADJUSTABLE FENCE INCLUDES SCALE. 1.25" QUILL DIAMETER WITH RETURN SPRING; CHROME FEED LEVER WITH ADJUSTABLE DEPTH GAUGE. 5.5" THROAT DEPTH; CLAMP LEVER FOR QUICK HEIGHT ADJUSTMENTS. 11"H X 8.7D" X 4.7"W. INCLUDES SIX, TRIPLE SLIT PRECISION COLLETS FOR 0.04" TO 0.125" SHAFTS AND INSTRUCTION MANUAL. 121-610 - OPTIONAL CHUCK, WITH KEY, ACCOMMODATES DRILL BITS UP TO 0.24"; 10,000 RPM MAXIMUM SPEED. GERMANY.
|
|
|
|
Machinery - Drill Presses
|
JET® 15" BENCHTOP OR FLOOR MOUNT DRILL PRESS - IT'S YOUR CHOICE
|
| 15" Benchtop Drill Press 16-spd
...plus other(s)
|
WHETHER YOU SELECT THE BENCHTOP OR THE FLOOR MODEL, THE JET® 15" VARIABLE SPEED DRILL PRESS IS A FULLY FUNCTIONING, HEAVY DUTY MACHINE WITH 16 SPEEDS RANGING FROM 200 TO 3,630 RPM:
3/4HP, 115/230V, 1PH MOTOR - 5/8" CHUCK, 3-1/8" SPINDLE TRAVEL, MT-2/JT-33 SPINDLE TAPER. UPFRONT, MECHANICAL PUSH BUTTON ON/OFF SWITCH. 2-7/8" DIA. COLUMN - DEPTH STOP DISPLAYS INCH/MM AND FEATURES QUICK SET BOLT. ROTATING, ±45° 13" X 16" CRANK OPERATED TABLE HAS "X" PATTERN MOUNTING GROOVES. BUILT IN WORKLIGHT (BULB NOT INCLUDED), CHUCK KEY AND INSTRUCTIONS INCLUDED. 39-1/2"H X 13"W X 31"D (BENCHTOP MODEL). 150 LBS. NET WEIGHT; 163 LBS. SHIPPING WEIGHT. 63"H X 13"W X 31"D (FLOOR MODEL). 180 LBS. NET WEIGHT; 193 LBS. SHIPPING WEIGHT. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
JET® 16-1/2" FLOOR MOUNT DRILL PRESS HAS PRODUCTION FACILITY CAPABILITIES
|
| 16-1/2" Drill Press 16-spd, 3/4hp
...plus other(s)
|
WITH 16 SPEEDS RANGING FROM 200 TO 3,630 RPM, THE JET® JDP-17MF 16-1/2" DRILL PRESS CAN BE COUNTED UPON FOR CONSISTENT PERFORMANCE UNDER CONTINUING WORKLOADS:
3/4HP, 1PH, 115/230V MOTOR - 5/8" CHUCK, 4-3/8" SPINDLE TRAVEL, MT-2 SPINDLE TAPER. UPFRONT, MECHANICAL PUSH BUTTON ON/OFF SWITCH. 3-1/8" DIA. COLUMN - 1/2" DIA. POSITIVE DEPTH STOP WITH DUAL LOCKING NUT. ROTATING ±45° 13-3/4" DIA. CRANK OPERATED TABLE WITH QUICK RELEASE CLAMP. BUILT IN WORKLIGHT (BULB NOT INCLUDED), CHUCK KEY AND INSTRUCTIONS INCLUDED. 66" HIGH W/11-1/8" X 19-5/8" BASE. 178 LBS. NET WEIGHT; 191 LBS. SHIPPING WEIGHT. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
POWERMATIC® 18" DRILL PRESS LETS YOU CHANGE SPEED WITHOUT MANUALLY CHANGING THE BELT
|
| Pm2800 18" Drill Press 1hp 120/230
...plus other(s)
|
A SLIDING LEVER ON THE POWERMATIC® MODEL PM2800 18" FLOOR MODEL DRILL PRESS IS ALL THAT'S NEEDED TO SELECT THE SPEED YOU WANT USING JUST ONE HAND - NO MORE LOOSENING AND MOVING THE DRIVE BELT FROM PULLEY TO PULLEY. LASER CROSS HAIRS HELP ENSURE ACCURATE, CONSISTENT DRILLING:
1HP, 115/230V, 1PH, 400-3.000 RPM TEFC MOTOR - 5/8" KEYLESS CHUCK W/MT2 X JT33 SPINDLE TAPER. 3-1/8" DIA. COLUMN; 4-3/8" SPINDLE TRAVEL; 18" SWING. 14" X 16" CAST IRON TABLE, WITH TWO MITER SLOTS, TILTS 90° AND EXTENDS TO 16" X 26" TO HANDLE LONGER STOCK. ADJUSTABLE SPLIT FENCE HAS BUILT-IN DUST PORT. COMES WITH ASSEMBLY HARDWARE, WRENCHES AND INSTRUCTIONS. 68-1/2"H X 20"W X 31-1/2"D; 11-7/8" X 19-5/8" "FOOTPRINT". 287 LBS. NET WEIGHT; 302 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
DELTA® 16-1/2" DRILL PRESS INCLUDES TWINLASER®
|
| 16-1/2" Drill Press, 1/2hp
|
DELTA® MODEL 17-950L 16-1/2" DRILL PRESS INTEGRATES A DUAL LASER POD THAT PROJECTS CROSSHAIRS ONTO THE TABLE AT THE POINT OF BIT CONTACT FOR MUCH MORE PRECISE DRILLING:
120V, 1/2HP, 1,720 RPM MOTOR; 12 SPEEDS - 250-3,000 RPM. 5/8" JACOBS® CHUCK AND KEY, 2" QUILL DIAMETER, 3-7/8" STROKE. ADJUSTABLE-POSITION LOCKING DEPTH STOP FOR ACCURATE DEPTH MEASUREMENT AND REPETITIVE DRILLING. ZERO-CLEARANCE MDF PLUNGE PLATE - 18" X 14" CAST IRON TABLE WITH T-SLOTS TILTS 0-45° FORWARD AND 0-90°, LEFT AND RIGHT. BELTS, STEP PULLEY, MOTOR CONTROL, WORK LIGHT AND INSTRUCTIONS INCLUDED. 66"H X 12-3/4"W X 25-1/4"D. NET WEIGHT 194 LBS.; 225 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
LONGER QUILL STROKE ON DELTA® 17" LASER DRILL PRESS INCREASES VERSATILITY
|
| 17" Drill Press With Twin Lasers
|
FEATURING A FULL 4-7/8" QUILL TRAVEL, THE DELTA® MODEL 17-959L 17" LASER DRILL PRESS INTEGRATES A FULLY ADJUSTABLE LASER POD THAT PROJECTS A CROSSHAIR AT THE DRILL BIT'S EXACT POINT OF CONTACT WITH YOUR WORKPIECE:
120V, 3/4HP, 1,720 RPM MOTOR; 16 SPEEDS (215-2,720 RPM) - 5/8" CHUCK W/KEY. 1-3/4" QUILL AND 3.15" COLUMN DIAMETERS - 17" SWING. 14" X 18" CAST IRON TABLE WITH T-SLOTS TILTS 0-45° FORWARD AND 0-90°, LEFT AND RIGHT. ZERO-CLEARANCE MDF PLUNGE PLATE REMOVES FOR THROUGH DRILLING WITH LARGE BITS AND ALSO ACCOMMODATES SANDING DRUMS. ADJUSTABLE-POSITION LOCKING DEPTH STOP FOR ACCURATE DEPTH MEASUREMENT AND REPETITIVE DRILLING. NEW NON-TIP BASE FOR GREATER STABILITY. BELTS, STEP PULLEY, MOTOR CONTROL, WORK LIGHT, WRENCHES AND INSTRUCTIONS INCLUDED. 70"H X 18"W X 25"D. NET WEIGHT 238 LBS.; 248 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse our
(Reconditioned)
to see Sub Categories)
