Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Hand Tools (47)
Turning (47)
|
Machinery (18)
Lathes (18)
|
|
|
Hand Tools - Turning
|
ONEWAY TERMITE HOLLOWING TOOL
|
| Termite Tool
...plus other(s)
|
HOLLOW OUT END GRAIN FASTER AND EASIER WITH THE ONEWAY TERMITE HOLLOWING TOOL. GREAT FOR DEEP HOLLOWING AS WELL AS HIGH-SPEED LIGHT FINISHING CUTS. THIS QUALITY RING CUTTER TOOL ACCEPTS THREE DIFFERENT CUTTER TIP SIZES: 3/8", 1/2" AND 5/8". TOOL COMES WITH 3/8" AND 1/2" CUTTER TIPS, A DRESSING STONE AND AN ALUMINUM OXIDE GRINDING POINT AND MOUNTING BLOCK FOR SHARPENING THE CUTTERS:
TOOL HAS 15-1/2" MAPLE HANDLE WITH 7-1/2" SHAFT AND BRASS FERRULE (24" OAL). HIGH SPEED STEEL TERMITE BITS HAVE 110,000 PSI TENSILE STRENGTH. BITS SHARPENED WITH GRINDING POINT IN A HAND DRILL OR DRILL PRESS. OPTIONAL BORAZON GRINDING POINT WILL LAST UP TO 100 TIMES LONGER THAN STANDARD ALUMINUM OXIDE POINT WITHOUT LOADING. PACKAGE INCLUDES TERMITE TOOL, 3/8" CUTTER, 1/2" CUTTER, ALOX GRINDING POINT, 2" X 3/4" DRESSING STONE, GRINDING BLOCK AND INSTRUCTIONS. CANADA.
|
|
|
|
Hand Tools - Turning
|
CROWN MICRO PARTING TOOL
|
| 1/16" Thin Parting Tool
|
THE CROWN MICRO PARTING TOOL HAS A THIN 1/16" CHISEL POINT TIP THAT WORKS ESPECIALLY WELL IN PARTING SMALLER PROJECTS AND WHERE A VERY SMALL CUTTING POINT IS REQUIRED FOR TEXTURING AND DETAIL WORK:
HIGH SPEED STEEL BLADE WITH FINELY FINISHED BEECH HANDLE. 9-1/2" OAL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' WEDGE TURNING TOOL MAKES SUPERB COVES AND MORE
|
| 3/8" Wedge Tool
...plus other(s)
|
GREAT FOR COVES ON SPINDLE OR FACEPLATE WORK, CROWN TOOLS' WEDGE TURNING TOOL IS ALSO EFFECTIVE FOR FINE FINISHING CUTS ON SMALL BOWLS AND GOBLETS:
8-1/2" HIGH SPEED STEEL BLADE; BEECH HANDLE WITH BRASS FERRULE; APPROXIMATELY 15" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' 3 POINT TURNING TOOL
|
| 3/8" Three Point Tool
...plus other(s)
|
A UNIQUE, MULTI-PURPOSE TOOL THAT CAN BE USED AS A SKEW, CROWN TOOLS' 3 POINT TURNING TOOL IS ALSO EFFECTIVE FOR END GRAIN PLANING, SHOULDER WORK, BEADING, FACEPLATE AND OTHER SPINDLE WORK:
HIGH SPEED STEEL BLADE WITH 4-1/2" BEECH HANDLE AND BRASS FERRULE; 10-1/4" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SKEWJY GOUGE IS A MULTIPURPOSE TURNING TOOL
|
| 3/8" Skewjy Gouge
...plus other(s)
|
THE "ALAN BEECHAM" SKEWJY GOUGE PERFORMS THE FUNCTIONS OF BOTH A SKEW AND A GOUGE WITH A REDUCED CHANCE OF "CATCH":
3/8" THICK HIGH SPEED STEEL CUTTER. 19-1/2" OVERALL TOOL LENGTH. VERSATILE TURNING TOOL WORKS EQUALLY WELL ON HARD AND SOFT WOODS. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN MULTI-TIP SCRAPER
|
| Multi-tip Scraper
...plus other(s)
|
THE CROWN TOOLS MULTI-TIP SCRAPER SYSTEM PROVIDES THREE INTERCHANGEABLE SCRAPER CUTTERS IN ONE HANDLE FOR GENERAL SCRAPING AND HIGH-SPEED SHEAR-SCRAPE FINISHING. THE TOOL COMES WITH A 1" DIAMETER ROUND CUTTER, A 1" SQUARE CUTTER AND A 1" X 1-1/2" PEAR SHAPED CUTTER. ALL CUTTERS CAN BE QUICKLY ROTATED BY LOOSENING THE SET SCREW TO EXPOSE A NEW SHARPENED EDGE THEREBY REDUCING THE SHARPENING TIME. CAN BE USED IN COMBINATION WITH THE "BEAVER" DEEP HOLLOWING TOOLS FOR QUICKLY OPENING OUT HOLLOW FORMS:
COMPLETE INSTRUCTIONS INCLUDED. 19-1/2" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
CROWN BEAVER DEEP HOLLOWING TOOLS - 115-613.
|
|
|
|
Hand Tools - Turning
|
BEAVER DEEP HOLLOWING TOOLS
|
| Beaver Deep Hollowing Tool
...plus other(s)
|
DESIGNED FOR HOLLOWING END GRAIN, THE "BEAVER" DEEP HOLLOWING TOOLS FROM CROWN TOOLS WILL REACH DEEP INTO OPEN BOWLS AND HOLLOW FORMS WITH FAST EFFICIENT CUTTING. THE TOOLS HAVE AN OVERALL LENGTH OF ABOUT 28" AND THE ROUND STEEL BARS EXTEND ABOUT 14" FROM THE HANDLE. THE STRAIGHT TOOL IS USED FOR OPENING OUT FORMS AND THE SWAN NECK TOOL FOR INSIDE WALL AND UNDER RIM WORK. THE REPLACEABLE HIGH SPEED STEEL RING TYPE CUTTER IS FITTED WITH AN ADJUSTABLE TOP WHICH CONTROLS THE DEPTH OF CUT. CAN BE USED IN COMBINATION WITH THE CROWN MULTI-TIP SCRAPER FOR HIGH-SPEED SHEAR-SCRAPE SURFACE FINISHING:
COMPLETE INSTRUCTIONS INCLUDED. 28" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
CROWN MULTI-TIP SCRAPER - 115-610.
|
|
|
|
Hand Tools - Turning
|
CROWN BOX SCRAPERS
|
| 1/4" Box Scraper
...plus other(s)
|
DESIGNED BY BRITISH WOODTURNER ALBERT HARRISON AND MANUFACTURED BY CROWN TOOLS, THESE PREMIUM BOX SCRAPERS WILL QUICKLY AND EASILY CLEAN THE INSIDE WALLS OF BOXES AND OTHER STRAIGHT WALLED TURNINGS:
1/4" SCRAPER HAS A 6" LONG HIGH SPEED STEEL BLADE 3/8" SCRAPER HAS A 6-3/4" LONG HIGH SPEED STEEL BLADE. HANDLES ARE 8-1/2" LONG WITH BRASS FERRULES. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN RING HOLLOWING TOOLS
|
| 1/2" Ring Tool
...plus other(s)
|
THESE DUAL BEVEL HIGH SPEED STEEL RING HOLLOWING TOOLS FROM CROWN TOOLS ARE USED FOR DEEP HOLLOWING APPLICATIONS. THEY ARE DESIGNED SPECIFICALLY FOR HOLLOWING INTO END GRAIN BUT CAN ALSO BE USED TO CLEAN UP ROUGH SURFACES ON SPINDLES AND THE INSIDE AND OUTSIDE OF BOWLS WHEN USED AT HIGH SPEEDS IN A SHEAR TYPE FINISHING CUT:
1/2" TOOL HAS 6-3/4" LONG BAR AND 1" TOOL HAS 11" LONG BAR. HANDLES ARE MADE OF DISTINCTIVE CLOSE-GRAINED BEECH WITH BRASS FERRULES. 15" OAL - 1/2" TOOL; 25" OAL - 1" TOOL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
ONEWAY SURE-GRIP HANDLES
|
| 17-1/2" Sure-grip Handle
...plus other(s)
|
12" LONG AND 17-1/2" LONG ONEWAY SURE-GRIP HANDLES ARE MADE OF HEAVY DUTY STEEL WITH A THICK PLASTIC COATING FOR A COMFORTABLE NON-SLIP GRIP AND REDUCED VIBRATIONS. EACH HANDLE HAS A 1/2" HOLE IN ONE END AND A 5/8" HOLE IN THE OTHER END. TOOLS ARE HELD IN PLACE WITH TWO SET SCREWS. TWO OPTIONAL ADAPTERS ARE AVAILABLE TO ACCOMMODATE 3/8" AND 3/4" SHAFT DIAMETER TOOLS:
HANDLES WILL ACCEPT ONEWAY GOUGE BLADES, WOODCUT TOOLS, KELTON TOOLS, SCORPION TOOLS AND MANY OTHERS. CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY GOUGE BLADES - 129-719. PRO-FORME HOLLOWING TOOLS - 131-552. WOODCUT FLEXI TOOLS - 155-168. WOODCUT CUP HOLLOWER - 130-844. KELTON TOOLS - 961-920. SCORPION TOOLS - 137-057.
|
|
|
|
Hand Tools - Turning
|
MASTERCUT BOWL GOUGE BLADES
|
| 3/8" Mastercut Bowl Gouge Blade
...plus other(s)
|
MADE OF CPM M4 HIGH SPEED STEEL AND HARDENED TO 63RC, ONEWAYS MASTERCUT BOWL GOUGE BLADES WILL HOLD AN EDGE A LOT LONGER THAN STANDARD HIGH SPEED STEEL. THE BLADES WILL SHARPEN EASIER AND HAVE A LONGER LIFE BECAUSE THE POWDER METAL PROCESS PRODUCES A STEEL WITH FINER PARTICLES AND A MORE UNIFORM CONSISTENCY. THE FLUTE DESIGNS ALSO ACHIEVE A WELL BALANCED COMPROMISE BETWEEN CUTTING EDGE AND TORSIONAL RESISTANCE PRODUCING TOOLS THAT ARE GOOD FOR BOTH HEAVY CUTTING AND HIGH SPEED FINISHING OPERATIONS:
BLADES DESIGNED FOR ONEWAY SURE-GRIP HANDLES BUT ALSO FIT KELTON AND PRO-FORME HANDLES. 12-5/8" OAL (HANDLES NOT INCLUDED). CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY SURE-GRIP HANDLES - 129-683. KELTON HANDLES - 130-776. PRO-FORME HANDLES - 130-817.
|
|
|
|
Hand Tools - Turning
|
KELTON HOLLOWING RIG
|
| 21" Deep Boring Bar
...plus other(s)
|
|
|
|
Hand Tools - Turning
|
KELTON TOOL GATES
|
| Tool Gate W/1" Post
...plus other(s)
|
THE 7/8" WIDE KELTON TOOL GATES PROVIDE THE ADDITIONAL LEVERAGE AND SUPPORT NECESSARY TO CONTROL FAST CUTTING DURING ADVANCED HOLLOWING OPERATIONS:
FEATURES A SWIVELING GATE REST WITH ROUND HARDENED ROLL PIN. SET SCREW ALLOWS GATE SHAFT TO BE MOVED HORIZONTALLY MOVING GATE CLOSER TO OR AWAY FROM TOOL REST SHAFT. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KELTON HOLLOWER TOOLS - 961-920.
|
|
|
|
Hand Tools - Turning
|
IRONS TOOL GATE PROVIDES EXCELLENT WOODTURNING CONTROL
|
| Irons Tool Gate, 1" Post
...plus other(s)
|
THE WOODCUT® IRONS TOOL GATE PIVOTING SADDLE FIRMLY SUPPORTS PRO-FORME AND OTHER ROUND SHAFT TURNING TOOLS WHILE CUTTING:
GATE EXTENSION PLATFORM FIRMLY CONNECTS TO TOOL SUPPORT POST WHILE AN ADJUSTABLE LOCKING COLLAR CAN BE TIGHTENED ONCE PROPER TOOL HEIGHT HAS BEEN SET. 5/8" AND 1-1/8" "U" SHAPED TOOL GUIDES, PLATFORM AND TOOL POST INCLUDED. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-FORME TOOLS - 131-552.
|
|
|
|
Hand Tools - Turning
|
CUP HOLLOWING TOOL
|
| Cup Hollowing Tool, Handled
...plus other(s)
|
THE WOODCUT® CUP HOLLOWING TOOL IS SPECIFICALLY DESIGNED FOR TURNING END GRAIN OPEN BOWLS, CUPS, GOBLETS AND SMALL VASES. WILL PRODUCE A VERY SMOOTH SURFACE WITH MINIMAL SANDING. WHEN THE CUTTER EDGE DULLS, JUST LOOSEN AND ROTATE CUTTER TO EXPOSE A SHARP CUTTING EDGE. RECOMMENDED FOR EXPERIENCED TURNERS WITH GOOD TOOL CONTROL:
SHAFT IS 1/2" DIAMETER AND 10-3/4" LONG. CUTTERS ARE 1/2" DIAMETER. AVAILABLE HANDLED AND UNHANDLED. UNHANDLED TOOL FITS WOODCUT FLEXI, ONEWAY SURE-GRIP AND KELTON HANDLES. INSTRUCTIONS INCLUDED. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
WOODCUT FLEXI HANDLE - 155-171. ONEWAY SURE-GRIP HANDLES - 129-683. KELTON HANDLES - 130-778.
|
|
|
|
Hand Tools - Turning
|
SORBY PROBE AND SWAN NECK HOLLOWING TOOLS
|
| 3/8" X 20" Probe Hollowing Tool
...plus other(s)
|
DESIGNED TO WORK THROUGH NARROW OPENINGS, THE ROBERT SORBY SWIVEL-TIP PROBE AND SWAN NECK HOLLOWING TOOLS WILL QUICKLY HOLLOW OUT BOWL AND VASE FORMS. THE STRAIGHT SHAFTED PROBE TOOLS WILL OPEN OUT THE FORMS WHILE THE SWAN NECK TOOLS ARE DESIGNED TO CUT THE INSIDE WALLS AND UNDERCUT RIM AREAS. THE HIGH SPEED STEEL SWIVEL-TIP CUTTERS CAN BE POSITIONED FOR THE MOST EFFECTIVE CUTTING ANGLE AND ARE SUITABLE FOR BOTH SIDE AND END GRAIN WORK. THE MAXIMUM RECOMMENDED EXTENSION OVER THE TOOL REST IS 5-1/2" FOR THE 20" TOOLS AND 7" FOR THE 24" TOOLS. OPTIONAL WALL THICKNESS GAUGES TAKE THE GUESSWORK OUT OF DETERMINING WALL THICKNESS AND ARE AVAILABLE FOR THE 14" AND 20" SWAN NECK TOOLS:
ALL TOOLS ARE FITTED WITH BULLET TIP CUTTERS. 859H AND 8802H TOOLS ALSO COME WITH ACCESSORY RS233C BALL END CUTTER. ENGLAND.
SPECIFICATIONS:
8801H PROBE TOOL: 3/8" BAR DIAMETER X 20" OAL. 8802H PROBE TOOL: 1/2" BAR DIAMETER X 24" OAL. 851H SWAN NECK TOOL: 3/8" BAR DIAMETER X 14" OAL. 855H SWAN NECK TOOL: 1/2" BAR DIAMETER X 20" OAL. 859H SWAN NECK TOOL: 5/8" BAR DIAMETER X 24" OAL. 854 WALL THICKNESS GAUGE FITS 14" 851H SWAN NECK TOOL. 857H WALL THICKNESS GAUGE FITS 20" 855H SWAN NECK TOOL. 851C BULLET TIP CUTTER FITS 851H, 855H AND 8801H TOOLS. RS232C BULLET TIP CUTTER FITS 859H AND 8802H TOOLS. RS233C BALL END CUTTER FITS 859H AND 8802H TOOLS. RS200C TEARDROP CUTTER FITS 859H AND 8802H TOOLS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY TURNING TOOLS - 153-605. SORBY HOLLOWMASTER TOOLS - 153-683. SORBY CHATTERTOOL - 137-249. SORBY SPIRALING SYSTEM - 153-695. SORBY THREAD CUTTING SYSTEM - 137-228. SORBY TURNING SMOCKS - 139-163.
|
|
|
|
Hand Tools - Turning
|
PRO-PM DETAIL GOUGES
|
| 3/8" Pro-pm Detail Gouge
...plus other(s)
|
CROWN PRO-PM DETAIL GOUGES ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY RESULTING IN LONG LASTING CUTTING EDGES. GENERALLY USED FOR MAKING COVES AND BEADS, THESE TOOLS ALSO FEATURE LONG SIDE GRINDS FOR LIGHT HOLLOWING CUTS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
ELLSWORTH PRO-PM SIGNATURE GOUGE
|
| Ellsworth Pm Signature Gouge
|
THE ELLSWORTH PRO-PM SIGNATURE GOUGE BY CROWN TOOLS OF SHEFFIELD, ENGLAND IS A WELL BALANCED, DEEP FLUTED BOWL GOUGE WITH THE CLASSIC ELLSWORTH SIDE GRIND. MADE FROM 5/8" BAR STOCK AND POWDER METAL (PM) HIGH SPEED STEEL, IT HAS EXCEPTIONAL EDGE HOLDING ABILITY FOR THE FINEST PROJECTS. THE EXTRA LONG HANDLE PROVIDES ADDITIONAL LEVERAGE FOR DEEP HOLLOWING. A SET OF DETAILED TURNING INSTRUCTIONS FROM DAVID ELLSWORTH IS INCLUDED:
HIGHLY FINISHED BLACK ASH HANDLE HAS BRASS FERRULE. PACKAGED IN PLASTIC SLEEVE FOR PROTECTION AND STORAGE. 26" OAL, 5/8" BAR DIAMETER. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE TURNING SET - 137-093. PRO-PM SPINDLE GOUGE - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432.
|
|
|
|
Hand Tools - Turning
|
PRO-FORME HOLLOWING TOOL SYSTEM
|
| Pro-forme Advanced Kit
...plus other(s)
|
THE WOODCUT® PRO-FORME HOLLOWING TOOLS ARE SOME OF THE MOST EFFECTIVE TURNING TOOLS AVAILABLE FOR DEEP HOLLOWING AND GENERAL ROUGHING WORK. THESE EFFICIENT TOOLS QUICKLY REMOVE LARGE AMOUNTS OF MATERIAL WITHOUT THE FEAR OF CATCH AND DIG-IN. THE SYSTEM INCLUDES THREE BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. THREE DIFFERENT 5/8" DIAMETER BORING BARS ARE AVAIABLE: STRAIGHT FOR GENERAL CUTTING OPERATIONS, SLIGHT BEND FOR INSIDE WALL CUTTING AND HEAVY BEND FOR INSIDE WALL AND UNDER-RIM CUTTING. THE REPLACEABLE POWERHEAD CUTTERS HAVE AN ADJUSTABLE GAUGE FOR LIGHT OR AGGRESSIVE CUTTING OPERATIONS AND THE PROMASTER 20" HANDLE WILL EXTEND REACH TO 10" BEYOND TOOL REST. AN OPTIONAL PRO-SCRAPER ASSEMBLY IS DESIGNED FOR HIGH-SPEED SURFACE FINISHING OPERATIONS:
PRECISION POWERHEAD CUTTERS FEATURE TRIPLE-TEMPERED HIGH SPEED STEEL WITH AN OPEN-SIDED HOOK TO ALLOW SHAVINGS TO BE EJECTED WITHOUT CLOGGING. CUTTERS ARE SHARPENED WITH HAND HELD DIAMOND HONES ROTATED AROUND THE CUTTER END - INSTRUCTIONS INCLUDED. PRO-FORME STARTER KIT INCLUDES STRAIGHT BORING BAR WITH POWERHEAD CUTTER AND A PROMASTER 20" HANDLE. PRO-FORME ADVANCED KIT INCLUDES STRAIGHT, SLIGHT BEND AND HEAVY BEND BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. 1-1/8" DIAMETER PROMASTER 20" HANDLE HAS A PADDED FOAM GRIP FOR COMFORT AND CONTROL. THE 5/8" DIAMETER END COUPLERS MAKE IT POSSIBLE TO JOIN TWO OR MORE HANDLES TOGETHER FOR AN EVEN LONGER REACH. OPTIONAL PRO-SCRAPER ASSEMBLY INCLUDES TWO HIGH SPEED STEEL SCRAPER CUTTERS. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FLEXI HOLLOWERS - 155-168. IRONS TOOL GATE - 130-805. DIAMOND FLEXI-SHARP HONES - 957-706. 4-WAY DIAMOND HONE - 874-974. DIA-SHARP HONES - 115-403.
|
|
|
|
Hand Tools - Turning
|
SCORPION BORING SYSTEM
|
| Scorpion Hollowing System (short)
...plus other(s)
|
|
|
|
Hand Tools - Turning
|
PRO-PM SPINDLE GOUGES
|
| 3/8" Pro-pm Spindle Gouge
...plus other(s)
|
CROWN PRO-PM TURNING TOOLS HAVE EXCEPTIONALLY HARD HIGH SPEED STEEL WITH CUTTING EDGES THAT LAST LONGER THAN TRADITIONAL HIGH SPEED STEEL. THE PM PROCESS USES AN ADVANCED METALLURGY PROCESS WHERE THE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS. THIS ENSURES A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT PRODUCING AN EXCEPTIONALLY HARD HIGH SPEED STEEL:
TOOLS HAVE PRECISION GROUND CUTTERS WITH BLACK ASH HANDLES AND BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 5-PC PRO-PM TURNING SET INCLUDES 3/4" ROUGHING GOUGE, 3/8" SPINDLE GOUGE, 1/2" BOWL GOUGE, 3/4" SKEW CHISEL AND 3/16" DIAMOND PARTING TOOL. BOWL GOUGE BAR DIAMETERS ARE APPROX 1/8" LARGER THAN SIZES INDICATED. 19" OAL (26" OAL FOR LONG BOWL GOUGES). ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
SORBY REPLACEMENT CUTTERS
|
| Bullet Tip Cutter
...plus other(s)
|
THESE ROBERT SORBY PROBE AND SWAN NECK HOLLOWING TOOL REPLACEMENT CUTTERS ARE MADE FOR SMOOTHER PERFORMANCE AND LONGER LIFE:
851C BULLET TIP CUTTER FITS 851H, 855H AND 8801H TOOLS. RS232C BULLET TIP CUTTER FITS 859H AND 8802H TOOLS. RS233C BALL END CUTTER FITS 859H AND 8802H TOOLS. RS200C TEARDROP CUTTER FITS 859H AND 8802H TOOLS. MADE OF SHEFFIELD HIGH SPEED STEEL. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY PROBE HOLLOWING TOOLS - 131-510. SORBY SWAN NECK HOLLOWING TOOLS - 137-204.
|
|
|
Click for More Info
|
Hand Tools - Turning
|
SORBY WALL THICKNESS GAUGES
|
| Wall Thickness Gauge For 851h
...plus other(s)
|
THE ROBERT SORBY WALL THICKNESS GAUGES TAKE THE GUESS WORK OUT OF DETERMINING WALL THICKNESS, PARTICULARLY WITH BLIND TURNING THROUGH NARROW OPENINGS. THE GAUGES ARE DESIGNED TO WORK WITH THE SORBY SWAN NECK HOLLOWING TOOLS AND ARE FULLY ADJUSTABLE TO THE DESIRED THICKNESS:
854 GAUGE WORKS WITH SORBY 851H 14" SWAN NECK TOOL. 857H GAUGE WORKS WITH SORBY 855H 20" SWAN NECK TOOL. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY SWAN NECK HOLLOWING TOOLS - 137-204.
|
|
|
|
Hand Tools - Turning
|
SORBY THREAD CUTTING SYSTEM
|
| 10 Tpi Thread Cutters, Pair
...plus other(s)
|
THE ROBERT SORBY THREAD CUTTING SYSTEM WILL HELP YOU PRODUCE CONSISTENT THREADS ON BOXES, LAMPS, MUSICAL INSTRUMENTS OR WHERE EVER THREADING IS DESIRED. THREAD CUTTERS ARE DESIGNED WITH A UNIQUE HELIX SHAPE SPECIFICALLY FOR CUTTING WOOD AND ARE AVAILABLE IN INTERNAL/EXTERNAL PAIRS AT 10, 16 AND 20 THREADS PER INCH - THE 10 TPI SET IS USED FOR LARGER WORK WHILE THE 20 TPI SET IS USED FOR VERY FINE WORK. THE THREAD AND SIZING GAUGE IS USED TO CORRECTLY SIZE THE WOOD COMPONENTS PRIOR TO CUTTING. IT IS CALIBRATED FOR 10, 16 AND 20 TPI WITH A FOURTH UNMARKED ANVIL FOR PUSH FITS. ALSO AVAILABLE IS A RELIEF CUTTING TOOL USED TO PRODUCE THE NECESSARY RECESS ON THE END OF INTERNAL THREADS. A COMPANION FOCUS ON THREAD CUTTING DVD SHOWS ALL THE TECHNIQUES AND PROCEDURES USED TO PRODUCE PERFECT THREADS INCLUDING THREE SAMPLE PROJECTS:
OPTIONAL THREAD CUTTING SUPPORT TOOL GIVES SUPPORT TO THE INTERNAL CUTTER MAKING CONSISTENT INTERNAL THREADING EASIER, PARTICULARLY ON LONG PRODUCTION RUNS. THREADED CUTTERS AVAILABLE IN PAIRS ONLY. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SORBY CHATTERTOOL
|
| Chattertool Kit
...plus other(s)
|
PRODUCE AN ENDLESS VARIETY OF DECORATIVE PATTERNS ON WOOD TURNINGS WITH THE SORBY CHATTERTOOL KIT. THE FLEXIBLE STEEL CUTTERS VIBRATE AT DIFFERENT FREQUENCIES DEPENDING ON THE SPEED OF THE LATHE, THE LENGTH THE CUTTER EXTENDS FROM THE TOOL AND THE TYPE OF WOOD USED. THE POSITION, ANGLE OF APPROACH AND THE SLOPE OF THE CUTTER WILL ALSO VARY THE PATTERN PRODUCING AN ARRAY OF DESIGNS ON END GRAIN WOOD. THE CHATTERTOOL ALSO DOUBLES AS A SHEAR SCRAPER WHEN USING THE RS222 TEARDROP SCRAPER CUTTER:
CHATTERTOOL KIT INCLUDES CHATTERTOOL, TWO CHATTER CUTTERS AND ONE TEARDROP SCRAPER CUTTER. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
WOODWORKER'S SUPPLY® HEAVY FINISHING SCRAPERS
|
| 1-1/2" Heavy Square Scraper
...plus other(s)
|
WOODWORKER'S SUPPLY® HIGH SPEED STEEL FINISHING SCRAPERS ARE DESIGNED FOR BALANCE, CONTROL AND SUPERIOR CUTTING PERFORMANCE. THEY ARE COMMONLY USED FOR FINAL SHAPING AND FOR PRODUCING A VERY SMOOTH SURFACE ON THE INSIDE AND OUTSIDE WALLS OF BOWLS. THE HEFTY 1-1/2" WIDE BY 5/6" THICK CUTTING ENDS DAMPEN VIBRATIONS FOR SMOOTH, EVEN CUTS. THEY ARE PARTICULARLY EFFECTIVE WHEN USED ON EDGE AT HIGH SPEEDS IN A SHEAR CUTTING ACTION. THE ROUND FACE SCRAPERS ARE USED ON THE INSIDE WALLS OF BOWLS AND THE FLAT FACED SCRAPERS ON THE OUTSIDE WALLS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE CLOSE-GRAINED BEECH HANDLES ARE ERGONOMICALLY DESIGNED FOR MAXIMUM HANDLING COMFORT:
HIGHLY FINISHED ROSEWOOD COLORED HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 22-1/2" OAL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SKEW CHISELS
|
| 1/2" Skew Chisel
...plus other(s)
|
DESIGNED BY WOODWORKER'S SUPPLY® AND MANUFACTURED BY CROWN TOOLS OF ENGLAND, THESE QUALITY HIGH SPEED STEEL SKEW CHISELS ARE ENGINEERED FOR BALANCE, CONTROL AND SUPERIOR CUTTING PERFORMANCE. THESE TRADITIONAL SQUARE EDGED TURNING CHISELS ARE USED FOR BEADING, PLANING AND GENERAL SPINDLE WORK. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE CLOSE-GRAINED BEECH HANDLES ARE ERGONOMICALLY DESIGNED FOR MAXIMUM HANDLING COMFORT:
ROSEWOOD COLORED BEECH HANDLES HAVE SOLID BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19-1/2" OAL (22" OAL 1-1/4" SKEW CHISEL). ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE WOODWORKER'S SUPPLY® 8 PIECE BOWL AND SPINDLE SET - 142-607.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HSS 8 PIECE BOWL AND SPINDLE SET - 142-607. HSS 5 PIECE BOWL TURNING SET - 142-601. HSS 5 PIECE SPINDLE TURNING SET - 142-604. HSS SQUARE CHISELS - 142-520. HSS OVAL SKEW CHISELS - 142-544. HSS ROUND SKEW CHISELS - 142-556. HSS ROLLED EDGE SKEW CHISELS - 142-562. HSS BEADING/PARTING CHISELS - 142-574. HSS DIAMOND PARTING TOOL - 142-577. HSS ROUGHING GOUGES - 142-478. HSS SPINDLE GOUGES - 142-460. HSS DETAIL GOUGES - 142-472. HSS BOWL GOUGES - 142-430. HSS SIDE GRIND BOWL GOUGES - 142-448. HSS SQUARE SCRAPERS - 142-484. HSS ROUND NOSE SCRAPERS - 142-496. HSS HOOK NOSED SCRAPERS - 142-514. HSS SPEARPOINT SCRAPER - 142-511. HSS HEAVY FINISHING SCRAPERS - 142-244.
|
|
|
|
Hand Tools - Turning
|
ROUND SKEW CHISELS
|
| 3/8" Round Skew Chisel
...plus other(s)
|
DESIGNED BY WOODWORKER'S SUPPLY® AND MANUFACTURED BY CROWN TOOLS OF ENGLAND, THESE QUALITY HIGH SPEED STEEL ROUND SKEW CHISELS ARE ENGINEERED FOR BALANCE, CONTROL AND SUPERIOR CUTTING PERFORMANCE. USED FOR BEADING, PLANING AND GENERAL SPINDLE WORK, ROUND SKEW CHISELS PROVIDE FREE ROTATIONAL MOVEMENT SAVING WEAR AND TEAR ON TOOL REST SURFACES. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE CLOSE-GRAINED BEECH HANDLES ARE ERGONOMICALLY DESIGNED FOR MAXIMUM HANDLING COMFORT:
ROSEWOOD COLORED BEECH HANDLES HAVE SOLID BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19-1/2" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE WOODWORKER'S SUPPLY® 8 PIECE BOWL AND SPINDLE SET - 142-607.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HSS 8 PIECE BOWL AND SPINDLE SET - 142-607. HSS 5 PIECE BOWL TURNING SET - 142-601. HSS 5 PIECE SPINDLE TURNING SET - 142-604. HSS SQUARE CHISELS - 142-520. HSS SKEW CHISELS - 142-532. HSS OVAL SKEW CHISELS - 142-544. HSS ROLLED EDGE SKEW CHISELS - 142-562. HSS BEADING/PARTING CHISELS - 142-574. HSS DIAMOND PARTING TOOL - 142-577. HSS ROUGHING GOUGES - 142-478. HSS SPINDLE GOUGES - 142-460. HSS DETAIL GOUGES - 142-472. HSS BOWL GOUGES - 142-430. HSS SIDE GRIND BOWL GOUGES - 142-448. HSS SQUARE SCRAPERS - 142-484. HSS ROUND NOSE SCRAPERS - 142-496. HSS HOOK NOSED SCRAPERS - 142-514. HSS SPEARPOINT SCRAPER - 142-511. HSS HEAVY FINISHING SCRAPERS - 142-244.
|
|
|
|
Hand Tools - Turning
|
5 PIECE BOWL TURNING SET
|
| 5 Piece Bowl Turning Set
|
DESIGNED BY WOODWORKER'S SUPPLY® AND MANUFACTURED BY CROWN TOOLS OF ENGLAND, THESE QUALITY TURNING TOOLS WERE ENGINEERED FOR BALANCE, CONTROL AND SUPERIOR CUTTING PERFORMANCE. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE CLOSE-GRAINED BEECH HANDLES ARE ERGONOMICALLY DESIGNED FOR MAXIMUM HANDLING COMFORT. TOOLS COME IN PRE-PACKAGED 5 PIECE BOXED SET FOR BOWL TURNING:
SET INCLUDES 1/2" AND 5/8" STANDARD BOWL GOUGES, 3/4" OVAL SKEW CHISEL, 3/16" DIAMOND PARTING TOOL, 1/4" HOOK-NOSED SCRAPER. ROSEWOOD COLORED BEECH HANDLES HAVE SOLID BRASS FERRULES. 19-1/2" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HSS 8 PIECE BOWL AND SPINDLE SET - 142-607. HSS 5 PIECE SPINDLE TURNING SET - 142-604. HSS SQUARE CHISELS - 142-520. HSS SKEW CHISELS - 142-532. HSS OVAL SKEW CHISELS - 142-544. HSS ROUND SKEW CHISELS - 142-556. HSS ROLLED EDGE SKEW CHISELS - 142-562. HSS BEADING/PARTING CHISELS - 142-574. HSS DIAMOND PARTING TOOL - 142-577. HSS ROUGHING GOUGES - 142-478. HSS SPINDLE GOUGES - 142-460. HSS DETAIL GOUGES - 142-472. HSS BOWL GOUGES - 142-430. HSS SIDE GRIND BOWL GOUGES - 142-448. HSS SQUARE SCRAPERS - 142-484. HSS ROUND NOSE SCRAPERS - 142-496. HSS HOOK NOSED SCRAPERS - 142-514. HSS SPEARPOINT SCRAPER - 142-511. HSS HEAVY FINISHING SCRAPERS - 142-244.
|
|
|
|
Hand Tools - Turning
|
5 PIECE SPINDLE TURNING SET
|
| 5 Piece Spindle Turning Set
|
DESIGNED BY WOODWORKER'S SUPPLY® AND MANUFACTURED BY CROWN TOOLS OF ENGLAND, THESE QUALITY TURNING TOOLS WERE ENGINEERED FOR BALANCE, CONTROL AND SUPERIOR CUTTING PERFORMANCE. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE CLOSE-GRAINED BEECH HANDLES ARE ERGONOMICALLY DESIGNED FOR MAXIMUM HANDLING COMFORT DURING LONG TURNING SESSIONS. COMES IN PRE-PACKAGED 5 PIECE BOXED SET FOR SPINDLE TURNING:
SET INCLUDES 3/8" AND 1/2" SPINDLE GOUGES, 1/2" SKEW CHISEL, 3/4" OVAL SKEW CHISEL, 3/16" DIAMOND PARTING TOOL. ROSEWOOD COLORED BEECH HANDLES HAVE SOLID BRASS FERRULES. 19-1/2" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HSS 8 PIECE BOWL AND SPINDLE SET - 142-607. HSS 5 PIECE BOWL TURNING SET - 142-601. HSS SQUARE CHISELS - 142-520. HSS SKEW CHISELS - 142-532. HSS OVAL SKEW CHISELS - 142-544. HSS ROUND SKEW CHISELS - 142-556. HSS ROLLED EDGE SKEW CHISELS - 142-562. HSS BEADING/PARTING CHISELS - 142-574. HSS DIAMOND PARTING TOOL - 142-577. HSS ROUGHING GOUGES - 142-478. HSS SPINDLE GOUGES - 142-460. HSS DETAIL GOUGES - 142-472. HSS BOWL GOUGES - 142-430. HSS SIDE GRIND BOWL GOUGES - 142-448. HSS SQUARE SCRAPERS - 142-484. HSS ROUND NOSE SCRAPERS - 142-496. HSS HOOK NOSED SCRAPERS - 142-514. HSS SPEARPOINT SCRAPER - 142-511. HSS HEAVY FINISHING SCRAPERS - 142-244.
|
|
|
|
Hand Tools - Turning
|
BOWL GOUGES
|
| 3/8" Bowl Gouge
...plus other(s)
|
MADE BY CROWN TOOLS OF SHEFFIELD FOR WOODWORKER'S SUPPLY®, THIS COMPREHENSIVE COLLECTION INCLUDES ALL OF THE GENERAL TURNING TOOLS USED IN TODAY'S BOWL AND SPINDLE TURNING:
MADE OF PRECISION GROUND HIGH SPEED STEEL WITH ROSEWOOD COLORED BEECH HANDLES FOR COMFORT AND CONTROL. PACKED IN PROTECTIVE SLEEVES FOR PROTECTION AND STORAGE. AVAILABLE AS INDIVIDUAL TOOLS AND IN BOXED SETS. 8-PC BOWL AND SPINDLE SET INCLUDES 5/8" STANDARD BOWL GOUGE, 1/2" SPINDLE GOUGE, 3/4" ROUGHING GOUGE, 1/2" HOOKED-NOSE SCRAPER, 3/4" OVAL SKEW CHISEL, 1/2" SQUARE SCRAPER, 1/2" ROUND NOSE SCRAPER, 3/16" DIAMOND PARTING TOOL. 5-PC BOWL TURNING SET INCLUDES 1/2" AND 5/8" STANDARD BOWL GOUGES, 3/4" OVAL SKEW CHISEL, 3/16" DIAMOND PARTING TOOL, 1/4" HOOK-NOSED SCRAPER. 5-PC SPINDLE TURNING SET INCLUDES 3/8" AND 1/2" SPINDLE GOUGES, 1/2" SKEW CHISEL, 3/4" OVAL SKEW CHISEL, 3/16" DIAMOND PARTING TOOL. BOWL GOUGE SIZES ARE ACTUAL BAR DIAMETERS. ENGLAND.
SPECIFICATIONS:
BOWL GOUGES, 19-1/2" OAL. SIDE GRIND BOWL GOUGES: 26" TO 28" OAL. SPINDLE GOUGES, 19-1/2" OAL. DETAIL GOUGES, 19-1/2" OAL. ROUGHING GOUGES, 18-1/2" OAL (1-1/4" TOOL - 23" OAL). SQUARE SCRAPERS, 19-1/2" OAL (1-1/4" TOOL - 22" OAL). ROUND NOSE SCRAPERS, 19-1/2" OAL (1-1/4" TOOL - 22" OAL). HOOK NOSE SCRAPERS, 19-1/2" OAL (1-1/4" TOOL - 22" OAL). SQUARE CHISELS, 19-1/2" OAL (1-1/4" TOOL - 22" OAL). SKEW CHISELS, 19-1/2" OAL (1-1/4" TOOL - 22" OAL). ROLLED EDGE SKEW CHISELS, 19-1/2" OAL (1-1/4" TOOL - 22" OAL). OVAL SKEW CHISELS, 19-1/2" OAL (1-1/4" TOOL - 22" OAL). ROUND SKEW CHISELS, 19-1/2" OAL. BEAD FORMING TOOLS, 19-1/2" OAL. PARTING/BEADING CHISELS, 19-1/2" OAL. DIAMOND PARTING TOOLS, 19-1/2" OAL.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HEAVY FINISHING SCRAPERS - 142-244. 5-PIECE MINIATURE TURNING SET - 142-610. 5-PIECE MICRO TURNING SET - 887-677.
|
|
|
|
Hand Tools - Turning
|
WSI 5-PC MINIATURE TURNING SET
|
| 5 Piece Miniature Turning Set
|
WOODWORKER'S SUPPLY® FIVE PIECE MINIATURE TURNING TOOLS ARE DESIGNED FOR SMALL PROJECTS AND FOR FINE DETAIL WORK ON LARGER PROJECTS:
ROSEWOOD COLORED BEECH HANDLES PROVIDE BETTER CONTROL MADE BY CROWN TOOLS OF SHEFFIELD FOR WOODWORKER'S SUPPLY. MINIATURE SET INCLUDES: 1/4" ROUND NOSE SCRAPER (A), 1/4" SKEW CHISEL (B), 1/8" SPINDLE GOUGE (C), 1/4" PARTING TOOL (D) AND 1/4" SPINDLE GOUGE (E). BLADES ARE 3-1/2" LONG. 10" OAL. ENGLAND. TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
5 PIECE MICRO TURNING SET - 887-677.
|
|
|
|
Hand Tools - Turning
|
SORBY TURNING TOOLS
|
| 6 Piece Bowl And Spindle Set
...plus other(s)
|
ROBERT SORBY® HAS A TWO CENTURY HISTORY MANUFACTURING QUALITY WOODWORKING TOOLS IN SHEFFIELD, ENGLAND AND THIS COLLECTION INCLUDES SOME OF THE MORE POPULAR TURNING TOOLS USED FOR BOWL AND SPINDLE TURNING:
MADE OF PRECISION GROUND HIGH SPEED STEEL WITH SOLID ASH HANDLES AND BRASS FERRULES. TOOLS COME PACKED IN PROTECTIVE SLEEVES FOR STORAGE. 6-PC BOWL AND SPINDLE SET HAS STANDARD SIZED TOOLS AND IS DESIGNED FOR BEGINNING BOWL AND SPINDLE TURNING. INCLUDES 3/8" SPINDLE GOUGE, 3/4" ROUGHING GOUGE, 1/2" OVAL SKEW CHISEL, 1/2" ROUND NOSE SCRAPER, 1/8" PARTING TOOL. 19" AVERAGE OAL. 5-PC INTERMEDIATE SET HAS SHORTER TOOLS AND IS DESIGNED FOR SPINDLE TURNING ON SMALL TO MID SIZED LATHES. INCLUDES 3/8" SPINDLE GOUGE, 3/4" ROUGHING GOUGE, 1/2" OVAL SKEW CHISEL, 1/2" ROUND NOSE SCRAPER, 1/8" DIAMOND PARTING TOOL. 14" AVERAGE OAL. GOUGE BAR DIAMETERS ARE APPROX 1/8" LARGER THAN SIZES INDICATED. ENGLAND.
SPECIFICATIONS:
BOWL GOUGES, 23" OAL. ROUGHING GOUGES: 3/4" - 19" OAL, 1-1/4" - 21" OAL. SPINDLE GOUGES: 3/8" - 16-1/2" OAL, 1/2" 18-1/4" OAL. SQUARE SCRAPERS: 1/2", 3/4" - 16" OAL, 1" 18-1/2" OAL. ROUND NOSE SCRAPERS: 1/2", 3/4" - 16" OAL, 1" 18-1/2" OAL. SKEW CHISELS: 1/2", 3/4" 16-1/4" OAL, 1" 18-1/4" OAL. OVAL SKEW CHISELS: 1/2", 3/4" 16-1/4" OAL, 1" 18-1/4" OAL. SPINDLEMASTER TOOLS: 1/2", 3/4" 16-1/4" OAL, 1" 18-1/4" OAL. PARTING TOOLS: 1/8" 13-1/2" OAL, 1/4" - 17" OAL. DIAMOND PARTING TOOL, 17" OAL.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
SORBY PROBE HOLLOWERS - 131-510. SORBY HOLLOWMASTER TOOLS - 153-683. SORBY SPIRALING SYSTEM - 153-695. SORBY CHATTERTOOL - 137-249. SORBY THREAD CUTTING SYSTEM - 137-228. SORBY TURNING SMOCKS - 139-163.
|
|
|
|
Hand Tools - Turning
|
SORBY HOLLOWMASTER TOOLS
|
| Rs211c Round Tip Cutter
...plus other(s)
|
THE ROBERT SORBY™ HOLLOWMASTER TOOLS ARE DEEP HOLLOWING SWAN NECK BAR TOOLS. THEY COME IN TWO SIZES: A LARGER 3/4" SHAFT HOLLOWMASTER FOR LARGER WORK AND A 1/2" SHAFT MIDI HOLLOWMASTER FOR SMALL TO MID RANGE WORK. EACH TOOL COMES WITH A SMALL SWIVEL TIP CUTTER FOR DEEP HOLLOWING AND A LARGER ROUND SCRAPER CUTTER FOR HIGH-SPEED SURFACE FINISHING. THE CURVED SHAPE OF THE SWAN NECK PREVENTS TOOL TWIST AND PROVIDES DEEP ACCESS THROUGH SMALL OPENINGS. THE OFFSET POSITION OF THE CUTTERS PREVENTS TOOL GRAB FOR SMOOTH EVEN TURNING:
HOLLOWMASTER CUTTERS: RS211C SWIVEL TIP CUTTER AND RS230C ROUND SCRAPER CUTTER. MIDI HOLLOWMASTER CUTTERS: RS111C SWIVEL TIP CUTTER AND RS130C ROUND SCRAPER CUTTER. ACCESSORY W472 TIP HOLDER PROVIDES CUTTER SUPPORT WHEN POWER SHARPENING OR DIAMOND HONES CAN BE USED FOR HAND SHARPENING. COMPLETE INSTRUCTIONS INCLUDED. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SORBY SPIRALING SYSTEMS
|
| Spiraling System
...plus other(s)
|
THE ROBERT SORBY™ SPIRALING SYSTEMS WILL PRODUCE A FULL RANGE OF DECORATIVE PATTERNS ON WOOD TURNINGS FROM STRIATIONS, WHORLS AND ORANGE PEEL EFFECTS TO TWISTS, SPIRALS AND FLUTES. TWO SYSTEMS ARE AVAILABLE: THE STANDARD SPIRALING SYSTEM AND THE MICRO SPIRALING SYSTEM. THE STANDARD SYSTEM INCLUDES FOUR CUTTERS AT DIFFERENT PITCHES (DISTANCE BETWEEN THREADS) AND THE MICRO SYSTEM INCLUDES TWO SMALLER CUTTERS. THE FOCUS ON DECORATIVE TECHNIQUES DVD IS A COMPREHENSIVE GUIDE SHOWING THE FULL EFFECTS OF THESE SYSTEMS:
EACH SYSTEM INCLUDES A SPIRALING TOOL, TOOL REST AND CUTTERS. CUTTERS ARE EASILY SHARPENED WITH DIAMOND HONE OR STONE SHOWN ON VIDEO. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
4-WAY DIAMOND HONE - 874-974. DIA-SHARP DIAMOND HONES - 115-403.
|
|
|
|
Hand Tools - Turning
|
FLEXI HOLLOWING SYSTEM
|
| Flexi Hollower
...plus other(s)
|
ADDING TO THE SUCCESSFUL PRO-FORME HOLLOWING TOOL SYSTEM, WOODCUT TOOLS OF NEW ZEALAND HAS DESIGNED THE NEW FLEXI HOLLOWER SYSTEM WITH ARTICULATED ARMS FOR MID-SIZED TURNINGS. THE FLEXI HOLLOWER COMES WITH A 1/2" DIAMETER BORING BAR, A POWERHEAD CUTTER ASSEMBLY, TWO ARTICULATED MOUNTS AND A SET OF WRENCHES. ACCESSORIES INCLUDE A FLEXI SCRAPER KIT, DOUBLE-ENDED BOWL GOUGES AND A TWIN COLLET HANDLE MAKING THIS A COMPLETE HOLLOWING SYSTEM:
TRIPLE-TEMPERED HIGH SPEED STEEL REPLACEABLE FLEXI POWERHEAD CUTTER HAS AN ADJUSTABLE GAUGE FOR LIGHT OR AGGRESSIVE CUTTING OPERATIONS. CUTTER HAS AN OPEN-SIDED HOOK TO ALLOW SHAVINGS TO BE EJECTED WITHOUT CLOG. TWO INTERCHANGEABLE ARTICULATED MOUNTS INCLUDE A SMALL MOUNT FOR STRAIGHT HOLLOWING AND A CURVED MOUNT FOR INSIDE WALL AND UNDER-RIM CUTTING. CUTTERS ARE SHARPENED WITH A HAND HELD DIAMOND HONE ROTATED AROUND THE CUTTER END - INSTRUCTIONS INCLUDED. FLEXI SCRAPER KIT INCLUDES TWO SCRAPER CUTTERS AND MOUNTING ADAPTER FOR SURFACE LEVELING AND HIGH SPEED FINISHING. DOUBLE-ENDED BOWL GOUGES HAVE REPLACEABLE DEEP U-SHAPED FINGERNAIL CUTTERS - TIPS CAN BE REPLACED WITH HEAT AND LOCTITE®. FOAM PADDED TWIN COLLET HANDLE WILL QUICKLY CHANGE COLLETS BETWEEN 3/8" AND 1/2" - EXTRA COLLET CONVENIENTLY STOWS INSIDE HANDLE. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
PRO-FORME HOLLOWING TOOLS - 131-552. IRONS TOOL GATE - 130-805. MINI DIAMOND SHIM HONES - 957-706. 4-WAY DIAMOND HONE - 874-974. TREND 5" DOUBLE-SIDED HONE - 155-075.
|
|
|
|
Hand Tools - Turning
|
EASY WOOD TOOLS
|
| Ci1 Easy Rougher
...plus other(s)
|
EASY WOOD TOOLS® HAS DESIGNED A LINE OF CARBIDE CUTTING TURNING TOOLS THAT QUICKLY REMOVE LARGE AMOUNTS OF MATERIAL WITH MINIMAL EFFORT. THE CARBIDE CUTTERS ARE RIGIDLY SUPPORTED BY PRECISION MOUNTS ON THE END OF HARDENED SHAFTS. THE CI1 EASY ROUGHER USES SQUARE CUTTERS FOR ROUGHING OUT BLANKS WHILE THE CI0 AND CI3 TOOLS USE ROUND CUTTERS FOR HOLLOWING, GENERAL CUTTING AND LIGHT HIGH-SPEED FINISHING. CUTTER TIPS CAN BE PERIODICALLY ROTATED TO EXPOSE A SHARP EDGE WHEN THE CUTTERS BECOME DULL - INEXPENSIVE CUTTERS ARE SIMPLY REPLACED WHEN USED UP. EASY WOOD RECOMMENDS SETTING ASIDE ONE AREA OF THE CUTTER FOR HIGH SPEED FINISHING CUTS TO PRESERVE THE ACTIVE LIFE OF THE CUTTER. DOUBLE-GRIP HANDLES ADD COMFORT AND VERSATILITY TO THE TURNING EXPERIENCE. UNHANDLED TOOLS HAVE 1/2" DIAMETER X 2-1/2" LONG ROUND SHANKS FOR MOUNTING IN CUSTOM HANDLES:
CI0 EASY FINISHER TOOL USES A ROUND CUTTER ON A STRAIGHT SHAFT FOR GENERAL CUTTING AND HIGH SPEED FINISHING. CI1 EASY ROUGHER TOOL USES SQUARE CUTTERS ON A ROUND SHAFT FOR GENERAL ROUGHING APPLICATIONS AND ACCEPTS THREE SQUARE SHAPED CUTTERS: SQUARE EDGE, R4 RADIUS AND R2 RADIUS SIDES (TOOL SUPPLIED WITH R4 CUTTER). CI3 H5 EASY HOLLOWER USES A ROUND CUTTER AND HAS A SWAN NECK FOR DEEP HOLLOWING APPLICATIONS. AN ACCESSORY LEXAN CHIP DEFLECTOR FITS ONTO THE 1/2" SQUARE CI0 AND CI1 SHAFTS TO EFFECTIVELY DEFLECT CHIPS. CI2M MINI ROUGHER TOOL AND CI3M MINI FINISHER TOOL ARE SMALLER VERSIONS OF THE ABOVE TOOLS AND ARE USED FOR SMALLER PROJECTS. USA.
SPECIFICATIONS:
CI0 EASY FINISHER: 8-1/2" X 1/2" SQUARE BAR, 25" OAL. CI1 EASY ROUGHER: 8-1/2" X 1/2" SQUARE BAR, 25" OAL. CI3 H5 EASY HOLLOWER: 9-1/2" X 1" FLAT BAR, 25" OAL. CI2M MINI ROUGHER: 4" X 3/8" SQUARE BAR, 16" OAL. CI3M MINI FINISHER: 4" X 3/8" SQUARE BAR, 16" OAL.
|
|
|
|
Hand Tools - Turning
|
8 PIECE WOOD TURNING TOOL SET
|
| 8 Pc Wood Turning Set
|
OUR 8 PIECE WOODTURNING TOOL SET FEATURES DROP FORGED, HIGH CARBON ALLOY TOOL STEEL BLADES AND COMFORTABLE HARDWOOD HANDLES. THE GREAT NECK 8 PIECE WOODTURNING TOOL SET FEATURES DROP FORGED, HIGH CARBON ALLOY TOOL STEEL BLADES APPROXIMATELY 6" LONG:
SET INCLUDES 1/2" AND 1" SKEW CHISELS, 3/8", 5/8" AND 1" GOUGES, 1/2" SPEAR POINT, 1/2" ROUND NOSE SCRAPER AND 1/2" PARTING TOOL. KILN DRIED HARDWOOD HANDLES WITH PLATED FERRULES - ABOUT 16" OVERALL. LIFETIME MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Hand Tools - Turning
|
DELTA® MICRO WOODTURNING TOOL SET - FIVE DIFFERENT SHAPES
|
| Set Of 5 Micro Turning Tools
|
IDEAL FOR SMALL OR DETAIL WORK, THE DELTA® 46-671 5-PIECE MICRO WOODTURNING TOOL SET COMES WITH A 1/4" ROUGHING OUT GOUGE, 1/8" SPINDLE GOUGE; 1/4" ROUND NOSE SCRAPER; 1/4" SKEW CHISEL AND 1/16" PARTING TOOL - EACH TOOL IS ONLY 10" LONG OVERALL:
HIGH-GRADE, STEEL ALLOY BLADES - PRECISION-GROUND CUTTING EDGES PROVIDE CLEANER, SMOOTHER TURNING. HARDWOOD HANDLES FOR BETTER CONTROL. METAL FERRULES FOR LONGER TOOL LIFE. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' FIVE PIECE 1/2" TURNING TOOL SET
|
| 1/2" Spindle Gouge
...plus other(s)
|
CROWN TOOLS' FIVE PIECE 1/2" TURNING TOOL SET FEATURES HIGH QUALITY CARBON STEEL BLADES, ASH HANDLES AND BRASS FERRULES:
SKEW CHISEL, ROUND NOSE SCRAPER, SPINDLE GOUGE, SPEAR POINT SCRAPER AND 1/4" WIDE PARTING/BEADING TOOL INCLUDED. 15" OVERALL LENGTH. ENGLAND.
|
|
|
|
Advanced Search Tools
Browse
