Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Hand Tools (70)
Turning (70)
|
Machinery (18)
Lathes (18)
|
|
|
Hand Tools - Turning
|
ONEWAY TERMITE HOLLOWING TOOL
|
| Termite Hollowing Tool Package
...plus other(s)
|
HOLLOW OUT END GRAIN FASTER AND EASIER WITH THE ONEWAY TERMITE HOLLOWING TOOL. GREAT FOR DEEP HOLLOWING AS WELL AS HIGH-SPEED LIGHT FINISHING CUTS. THIS QUALITY RING CUTTER TOOL ACCEPTS THREE DIFFERENT CUTTER TIP SIZES: 3/8", 1/2" AND 5/8". TOOL COMES WITH 3/8" AND 1/2" CUTTER TIPS, A DRESSING STONE AND AN ALUMINUM OXIDE GRINDING POINT AND MOUNTING BLOCK FOR SHARPENING THE CUTTERS:
TOOL HAS 15-1/2" MAPLE HANDLE WITH 7-1/2" SHAFT AND BRASS FERRULE (24" OAL). HIGH SPEED STEEL TERMITE BITS HAVE 110,000 PSI TENSILE STRENGTH. BITS SHARPENED WITH GRINDING POINT IN A HAND DRILL OR DRILL PRESS. OPTIONAL BORAZON GRINDING POINT WILL LAST UP TO 100 TIMES LONGER THAN STANDARD ALUMINUM OXIDE POINT WITHOUT LOADING. PACKAGE INCLUDES TERMITE TOOL, 3/8" CUTTER, 1/2" CUTTER, ALOX GRINDING POINT, 2" X 3/4" DRESSING STONE, GRINDING BLOCK AND INSTRUCTIONS. CANADA.
|
|
|
|
Hand Tools - Turning
|
PRO-PM SPINDLE GOUGES
|
| 3/8" Pro-pm Spindle Gouge
...plus other(s)
|
CROWN PRO-PM SPINDLE GOUGES ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY RESULTING IN LONG LASTING CUTTING EDGES. THESE TOOLS HAVE THE TRADITIONAL FINGERNAIL GRIND FOR MAKING COVES, BEADS AND MINOR ROUGHING CUTS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM LONG BOWL GOUGES
|
| 1/4" Pro-pm Long Bowl Gouge
...plus other(s)
|
SPECIFICALLY DESIGNED FOR DEEP FACEPLATE TURNING, CROWN PRO-PM LONG BOWL GOUGES ARE ENGINEERED TO STAY SHARP LONGER:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 26" OAL; 16" LONG BLACK ASH HANDLES. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN MICRO PARTING TOOL
|
| 1/16" Thin Parting Tool
|
THE CROWN MICRO PARTING TOOL HAS A THIN 1/16" CHISEL POINT TIP THAT WORKS ESPECIALLY WELL IN PARTING SMALLER PROJECTS AND WHERE A VERY SMALL CUTTING POINT IS REQUIRED FOR TEXTURING AND DETAIL WORK:
HIGH SPEED STEEL BLADE WITH FINELY FINISHED BEECH HANDLE. 9-1/2" OAL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
PRO-PM SQUARE SCRAPERS
|
| 3/4" Pro-pm Square Scraper
...plus other(s)
|
CROWN PRO-PM SQUARE END SCRAPERS ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY PRODUCING A LONG LASTING CUTTING EDGE. THESE TOOLS ARE COMMONLY USED FOR MAKING SQUARE CUTS AND FOR HIGH SPEED SMOOTHING OPERATIONS. THEY CAN ALSO BE USED AS A BLANK FOR GRINDING SPECIALTY SHAPES SUCH AS HOOK NOSED SCRAPERS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
PRO-PM ROUND NOSE SCRAPERS
|
| 3/4" Pro-pm Round Nose Scraper
...plus other(s)
|
CROWN PRO-PM ROUND NOSE SCRAPERS ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY PRODUCING A LONG LASTING CUTTING EDGE. THESE ROUND NOSE SCRAPERS ARE ALL-AROUND TOOLS USED FOR GENERAL SCRAPING OPERATIONS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
PRO-PM SKEW CHISELS
|
| 3/4" Pro-pm Skew Chisel
...plus other(s)
|
CROWN PRO-PM SKEW CHISELS ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY PRODUCING A LONG LASTING CUTTING EDGE. THESE TRADITIONAL SQUARE EDGED TURNING CHISELS ARE USED FOR BEADING, PLANING AND GENERAL SPINDLE WORK. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
PRO-PM DIAMOND PARTING TOOL
|
| 3/16" Pro-pm Diamond Parting Tool
|
THIS CROWN PRO-PM DIAMOND PARTING TOOL IS MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY PRODUCING A LONG LASTING CUTTING EDGE. USED FOR PARTING CUTS AND FINE DETAIL WORK, THE LONGER VERTICAL CROSS SECTION ON THIS TOOL HELPS REDUCE VIBRATIONS WHILE THE TAPERED SIDES EFFECTIVELY EJECT WASTE MATERIAL FOR COOLER, CLEANER CUTS. THE HIGH SPEED STEEL BLADE IS MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLE IS DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLE HAS BRASS FERRULE. PACKAGED IN PLASTIC SLEEVE FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' WEDGE TURNING TOOL MAKES SUPERB COVES AND MORE
|
| 3/8" Wedge Tool
...plus other(s)
|
GREAT FOR COVES ON SPINDLE OR FACEPLATE WORK, CROWN TOOLS' WEDGE TURNING TOOL IS ALSO EFFECTIVE FOR FINE FINISHING CUTS ON SMALL BOWLS AND GOBLETS:
8-1/2" HIGH SPEED STEEL BLADE; BEECH HANDLE WITH BRASS FERRULE; APPROXIMATELY 15" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' 3 POINT TURNING TOOL
|
| 3/8" Three Point Tool
...plus other(s)
|
A UNIQUE, MULTI-PURPOSE TOOL THAT CAN BE USED AS A SKEW, CROWN TOOLS' 3 POINT TURNING TOOL IS ALSO EFFECTIVE FOR END GRAIN PLANING, SHOULDER WORK, BEADING, FACEPLATE AND OTHER SPINDLE WORK:
HIGH SPEED STEEL BLADE WITH 4-1/2" BEECH HANDLE AND BRASS FERRULE; 10-1/4" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
ELLSWORTH HSS SIGNATURE GOUGE
|
| Ellsworth Hss Signature Gouge
|
THE ELLSWORTH HSS SIGNATURE GOUGE BY CROWN TOOLS OF SHEFFIELD, ENGLAND IS A WELL BALANCED, DEEP FLUTED BOWL GOUGE WITH THE CLASSIC ELLSWORTH SIDE GRIND. MADE FROM 5/8" BAR STOCK, THIS HIGH SPEED STEEL BOWL GOUGE HAS EXCEPTIONAL EDGE HOLDING ABILITY FOR THE FINEST PROJECTS. THE EXTRA LONG HANDLE PROVIDES ADDITIONAL LEVERAGE FOR DEEP HOLLOWING. A SET OF DETAILED TURNING INSTRUCTIONS FROM DAVID ELLSWORTH IS INCLUDED:
HIGHLY FINISHED BEECH HANDLE HAS BRASS FERRULE. PACKAGED IN PLASTIC SLEEVE FOR PROTECTION AND STORAGE. 26" OAL, 5/8" BAR DIAMETER. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SKEWJY GOUGE IS A MULTIPURPOSE TURNING TOOL
|
| 3/8" Skewjy Gouge
...plus other(s)
|
THE "ALAN BEECHAM" SKEWJY GOUGE PERFORMS THE FUNCTIONS OF BOTH A SKEW AND A GOUGE WITH A REDUCED CHANCE OF "CATCH":
3/8" THICK HIGH SPEED STEEL CUTTER. 19-1/2" OVERALL TOOL LENGTH. VERSATILE TURNING TOOL WORKS EQUALLY WELL ON HARD AND SOFT WOODS. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN MULTI-TIP SCRAPER
|
| Multi-tip Scraper
...plus other(s)
|
THE CROWN TOOLS MULTI-TIP SCRAPER SYSTEM PROVIDES THREE INTERCHANGEABLE SCRAPER CUTTERS IN ONE HANDLE FOR GENERAL SCRAPING AND HIGH-SPEED SHEAR-SCRAPE FINISHING. THE TOOL COMES WITH A 1" DIAMETER ROUND CUTTER, A 1" SQUARE CUTTER AND A 1" X 1-1/2" PEAR SHAPED CUTTER. ALL CUTTERS CAN BE QUICKLY ROTATED BY LOOSENING THE SET SCREW TO EXPOSE A NEW SHARPENED EDGE THEREBY REDUCING THE SHARPENING TIME. CAN BE USED IN COMBINATION WITH THE "BEAVER" DEEP HOLLOWING TOOLS FOR QUICKLY OPENING OUT HOLLOW FORMS:
COMPLETE INSTRUCTIONS INCLUDED. 19-1/2" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
CROWN BEAVER DEEP HOLLOWING TOOLS - 115-613.
|
|
|
|
Hand Tools - Turning
|
BEAVER DEEP HOLLOWING TOOLS
|
| Beaver Deep Hollowing Tool
...plus other(s)
|
DESIGNED FOR HOLLOWING END GRAIN, THE "BEAVER" DEEP HOLLOWING TOOLS FROM CROWN TOOLS WILL REACH DEEP INTO OPEN BOWLS AND HOLLOW FORMS WITH FAST EFFICIENT CUTTING. THE TOOLS HAVE AN OVERALL LENGTH OF ABOUT 28" AND THE ROUND STEEL BARS EXTEND ABOUT 14" FROM THE HANDLE. THE STRAIGHT TOOL IS USED FOR OPENING OUT FORMS AND THE SWAN NECK TOOL FOR INSIDE WALL AND UNDER RIM WORK. THE REPLACEABLE HIGH SPEED STEEL RING TYPE CUTTER IS FITTED WITH AN ADJUSTABLE TOP WHICH CONTROLS THE DEPTH OF CUT. CAN BE USED IN COMBINATION WITH THE CROWN MULTI-TIP SCRAPER FOR HIGH-SPEED SHEAR-SCRAPE SURFACE FINISHING:
COMPLETE INSTRUCTIONS INCLUDED. 28" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
CROWN MULTI-TIP SCRAPER - 115-610.
|
|
|
|
Hand Tools - Turning
|
CROWN BOX SCRAPERS
|
| 1/4" Box Scraper
...plus other(s)
|
DESIGNED BY BRITISH WOODTURNER ALBERT HARRISON AND MANUFACTURED BY CROWN TOOLS, THESE PREMIUM BOX SCRAPERS WILL QUICKLY AND EASILY CLEAN THE INSIDE WALLS OF BOXES AND OTHER STRAIGHT WALLED TURNINGS:
1/4" SCRAPER HAS A 6" LONG HIGH SPEED STEEL BLADE 3/8" SCRAPER HAS A 6-3/4" LONG HIGH SPEED STEEL BLADE. HANDLES ARE 8-1/2" LONG WITH BRASS FERRULES. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN RING HOLLOWING TOOLS
|
| 1/2" Ring Tool
...plus other(s)
|
THESE DUAL BEVEL HIGH SPEED STEEL RING HOLLOWING TOOLS FROM CROWN TOOLS ARE USED FOR DEEP HOLLOWING APPLICATIONS. THEY ARE DESIGNED SPECIFICALLY FOR HOLLOWING INTO END GRAIN BUT CAN ALSO BE USED TO CLEAN UP ROUGH SURFACES ON SPINDLES AND THE INSIDE AND OUTSIDE OF BOWLS WHEN USED AT HIGH SPEEDS IN A SHEAR TYPE FINISHING CUT:
1/2" TOOL HAS 6-3/4" LONG BAR AND 1" TOOL HAS 11" LONG BAR. HANDLES ARE MADE OF DISTINCTIVE CLOSE-GRAINED BEECH WITH BRASS FERRULES. 15" OAL - 1/2" TOOL; 25" OAL - 1" TOOL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN 1/4" SQUARE HOLLOWING TOOLS
|
| 1/4" Sq Hollowing Tool, 45 Degree
...plus other(s)
|
1/4" SQUARE HOLLOWING TOOLS LET YOU WORK THROUGH RESTRICTED OPENINGS AS SMALL AS 3/8" IN DIAMETER AND TO A DEPTH OF 4". THESE INNOVATIVE TOOLS ARE PERFECT FOR SMALL HOLLOW WORK AND ARE MADE OF PREMIUM SHEFFIELD HIGH SPEED STEEL:
BLADES ARE 5-1/4" LONG AND SET INTO 8-1/2" LONG HANDLES. AVAILABLE IN STRAIGHT, 45° SLIGHT BENT AND 80° HEAVY BENT TOOLS. HANDLES ARE MADE OF DISTINCTIVE CLOSE-GRAINED BEECH WITH BRASS FERRULES. 14" OAL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
ONEWAY SURE-GRIP HANDLES
|
| 17-1/2" Sure-grip Handle
...plus other(s)
|
12" LONG AND 17-1/2" LONG ONEWAY SURE-GRIP HANDLES ARE MADE OF HEAVY DUTY STEEL WITH A THICK PLASTIC COATING FOR A COMFORTABLE NON-SLIP GRIP AND REDUCED VIBRATIONS. EACH HANDLE HAS A 1/2" HOLE IN ONE END AND A 5/8" HOLE IN THE OTHER END. TOOLS ARE HELD IN PLACE WITH TWO SET SCREWS. TWO OPTIONAL ADAPTERS ARE AVAILABLE TO ACCOMMODATE 3/8" AND 3/4" SHAFT DIAMETER TOOLS:
HANDLES WILL ACCEPT ONEWAY GOUGE BLADES, WOODCUT TOOLS, KELTON TOOLS, SCORPION TOOLS AND MANY OTHERS. CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY GOUGE BLADES - 129-719. PRO-FORME HOLLOWING TOOLS - 131-552. WOODCUT FLEXI TOOLS - 155-168. WOODCUT CUP HOLLOWER - 130-844. KELTON TOOLS - 961-920. SCORPION TOOLS - 137-057.
|
|
|
|
Hand Tools - Turning
|
MASTERCUT BOWL GOUGE BLADES
|
| 3/8" Mastercut Bowl Gouge Blade
...plus other(s)
|
MADE OF CPM M4 HIGH SPEED STEEL AND HARDENED TO 63RC, ONEWAYS MASTERCUT BOWL GOUGE BLADES WILL HOLD AN EDGE A LOT LONGER THAN STANDARD HIGH SPEED STEEL. THE BLADES WILL SHARPEN EASIER AND HAVE A LONGER LIFE BECAUSE THE POWDER METAL PROCESS PRODUCES A STEEL WITH FINER PARTICLES AND A MORE UNIFORM CONSISTENCY. THE FLUTE DESIGNS ALSO ACHIEVE A WELL BALANCED COMPROMISE BETWEEN CUTTING EDGE AND TORSIONAL RESISTANCE PRODUCING TOOLS THAT ARE GOOD FOR BOTH HEAVY CUTTING AND HIGH SPEED FINISHING OPERATIONS:
BLADES DESIGNED FOR ONEWAY SURE-GRIP HANDLES BUT ALSO FIT KELTON AND PRO-FORME HANDLES. 12-5/8" OAL (HANDLES NOT INCLUDED). CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY SURE-GRIP HANDLES - 129-683. KELTON HANDLES - 130-776. PRO-FORME HANDLES - 130-817.
|
|
|
|
Hand Tools - Turning
|
KELTON HOLLOWING RIG
|
| 21" Deep Boring Bar
...plus other(s)
|
|
|
|
Hand Tools - Turning
|
KELTON TOOL GATES
|
| Tool Gate W/1" Post
...plus other(s)
|
THE 7/8" WIDE KELTON TOOL GATES PROVIDE THE ADDITIONAL LEVERAGE AND SUPPORT NECESSARY TO CONTROL FAST CUTTING DURING ADVANCED HOLLOWING OPERATIONS:
FEATURES A SWIVELING GATE REST WITH ROUND HARDENED ROLL PIN. SET SCREW ALLOWS GATE SHAFT TO BE MOVED HORIZONTALLY MOVING GATE CLOSER TO OR AWAY FROM TOOL REST SHAFT. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KELTON HOLLOWER TOOLS - 961-920.
|
|
|
|
Hand Tools - Turning
|
IRONS TOOL GATE PROVIDES EXCELLENT WOODTURNING CONTROL
|
| Irons Tool Gate, 1" Post
...plus other(s)
|
THE WOODCUT® IRONS TOOL GATE PIVOTING SADDLE FIRMLY SUPPORTS PRO-FORME AND OTHER ROUND SHAFT TURNING TOOLS WHILE CUTTING:
GATE EXTENSION PLATFORM FIRMLY CONNECTS TO TOOL SUPPORT POST WHILE AN ADJUSTABLE LOCKING COLLAR CAN BE TIGHTENED ONCE PROPER TOOL HEIGHT HAS BEEN SET. 5/8" AND 1-1/8" "U" SHAPED TOOL GUIDES, PLATFORM AND TOOL POST INCLUDED. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-FORME TOOLS - 131-552.
|
|
|
|
Hand Tools - Turning
|
CUP HOLLOWING TOOL
|
| Cup Hollowing Tool - Handled
...plus other(s)
|
THE WOODCUT® CUP HOLLOWING TOOL IS SPECIFICALLY DESIGNED FOR TURNING END GRAIN OPEN BOWLS, CUPS, GOBLETS AND SMALL VASES. WILL PRODUCE A VERY SMOOTH SURFACE WITH MINIMAL SANDING. WHEN THE CUTTER EDGE DULLS, JUST LOOSEN AND ROTATE CUTTER TO EXPOSE A SHARP CUTTING EDGE. RECOMMENDED FOR EXPERIENCED TURNERS WITH GOOD TOOL CONTROL:
SHAFT IS 1/2" DIAMETER AND 10-3/4" LONG. CUTTERS ARE 1/2" DIAMETER. AVAILABLE HANDLED AND UNHANDLED. UNHANDLED TOOL FITS WOODCUT FLEXI, ONEWAY SURE-GRIP AND KELTON HANDLES. INSTRUCTIONS INCLUDED. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
WOODCUT FLEXI HANDLE - 155-171. ONEWAY SURE-GRIP HANDLES - 129-683. KELTON HANDLES - 130-778.
|
|
|
|
Hand Tools - Turning
|
SORBY SWIVEL-TIP PROBE HOLLOWING TOOLS
|
| 20" Probe Hollowing Tool
...plus other(s)
|
DESIGNED TO WORK THROUGH THE NARROWEST OPENINGS, THE ROBERT SORBY SWIVEL-TIP PROBE HOLLOWING TOOLS WILL QUICKLY HOLLOW OUT BOWL AND VASE FORMS. THESE STRAIGHT SHAFTED TOOLS WILL OPEN OUT THE INSIDES OF HOLLOW FORMS WHILE THE COMPANION SORBY SWAN NECK HOLLOWING TOOLS - WHOSE CUTTERS ARE INTERCHANGEABLE ARE DESIGNED TO CUT HARD TO REACH INSIDE WALLS AND UNDER-RIM AREAS THROUGH NARROW OPENINGS. THE MAXIMUM RECOMMENDED EXTENSION OVER THE TOOL REST IS 5-1/2" FOR THE 20" TOOL AND 7" FOR THE 24" TOOL. SUITABLE FOR BOTH SIDE AND END GRAIN WORK:
TOOLS ARE FITTED WITH HIGH SPEED STEEL BULLET CUTTERS. OPTIONAL ROUND NOSE "BALL END" SCRAPER CUTTER (NOT INCLUDED) FOR HIGH-SPEED SHEAR CUTTING IS AVAILABLE FOR 8802H TOOL. 20" OAL X 3/8" BAR DIAMETER 8801H TOOL. 24" OAL X 1/2" BAR DIAMETER - 8802H TOOL. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY SWAN NECK HOLLOWING TOOLS - 137-204. SORBY REPLACEMENT CUTTERS - 137-213.
|
|
|
|
Hand Tools - Turning
|
PRO-PM ROUGHING GOUGE
|
| 3/4" Pro-pm Roughing Gouge
|
THE CROWN PRO-PM ROUGHING GOUGE IS MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY RESULTING IN LONG LASTING CUTTING EDGES. THIS TOOL IS COMMONLY USED FOR ROUNDING OUT SQUARE STOCK AND REDUCING SPINDLE DIAMETERS WITH BACK AND FORTH PLANING CUTS. THE HIGH SPEED STEEL BLADE IS MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLE IS DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLE HAS BRASS FERRULE. PACKAGED IN PLASTIC SLEEVE FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM SPINDLE GOUGE - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432.
|
|
|
|
Hand Tools - Turning
|
PRO-PM DETAIL GOUGES
|
| 3/8" Pro-pm Detail Gouge
...plus other(s)
|
CROWN PRO-PM DETAIL GOUGES ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY RESULTING IN LONG LASTING CUTTING EDGES. GENERALLY USED FOR MAKING COVES AND BEADS, THESE TOOLS ALSO FEATURE LONG SIDE GRINDS FOR LIGHT HOLLOWING CUTS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
ELLSWORTH PRO-PM SIGNATURE GOUGE
|
| Ellsworth Pm Signature Gouge
|
THE ELLSWORTH PRO-PM SIGNATURE GOUGE BY CROWN TOOLS OF SHEFFIELD, ENGLAND IS A WELL BALANCED, DEEP FLUTED BOWL GOUGE WITH THE CLASSIC ELLSWORTH SIDE GRIND. MADE FROM 5/8" BAR STOCK AND POWDER METAL (PM) HIGH SPEED STEEL, IT HAS EXCEPTIONAL EDGE HOLDING ABILITY FOR THE FINEST PROJECTS. THE EXTRA LONG HANDLE PROVIDES ADDITIONAL LEVERAGE FOR DEEP HOLLOWING. A SET OF DETAILED TURNING INSTRUCTIONS FROM DAVID ELLSWORTH IS INCLUDED:
HIGHLY FINISHED BLACK ASH HANDLE HAS BRASS FERRULE. PACKAGED IN PLASTIC SLEEVE FOR PROTECTION AND STORAGE. 26" OAL, 5/8" BAR DIAMETER. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE TURNING SET - 137-093. PRO-PM SPINDLE GOUGE - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432.
|
|
|
|
Hand Tools - Turning
|
PRO-PM BOWL GOUGES
|
| 3/4" Pro-pm Long Bowl Gouge
...plus other(s)
|
CROWN PRO-PM BOWL GOUGES ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY RESULTING IN LONG LASTING CUTTING EDGES. THEY ARE DEEPLY FLUTED WITH A TRADITIONAL FINGERNAIL GRIND FOR FACEPLATE BOWL TURNING. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE. SIZES INDICATE DISTANCE BETWEEN FLUTES - BAR DIAMETERS ARE APPROXIMATELY 1/8" LARGER THAN SIZES SHOWN:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL - 1/2" SHORT GOUGE, 26" OAL LONG GOUGES. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. ELLSWORTH SIGNATURE GOUGE - 131-543. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432.
|
|
|
|
Hand Tools - Turning
|
PRO-FORME HOLLOWING TOOL SYSTEM
|
| Pro-forme Advanced Kit
...plus other(s)
|
THE WOODCUT® PRO-FORME HOLLOWING TOOLS ARE SOME OF THE MOST EFFECTIVE TURNING TOOLS AVAILABLE FOR DEEP HOLLOWING AND GENERAL ROUGHING WORK. THESE EFFICIENT TOOLS QUICKLY REMOVE LARGE AMOUNTS OF MATERIAL WITHOUT THE FEAR OF CATCH AND DIG-IN. THE SYSTEM INCLUDES THREE BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. THREE DIFFERENT 5/8" DIAMETER BORING BARS ARE AVAIABLE: STRAIGHT FOR GENERAL CUTTING OPERATIONS, SLIGHT BEND FOR INSIDE WALL CUTTING AND HEAVY BEND FOR INSIDE WALL AND UNDER-RIM CUTTING. THE REPLACEABLE POWERHEAD CUTTERS HAVE AN ADJUSTABLE GAUGE FOR LIGHT OR AGGRESSIVE CUTTING OPERATIONS AND THE PROMASTER 20" HANDLE WILL EXTEND REACH TO 10" BEYOND TOOL REST. AN OPTIONAL PRO-SCRAPER ASSEMBLY IS DESIGNED FOR HIGH-SPEED SURFACE FINISHING OPERATIONS:
PRECISION POWERHEAD CUTTERS FEATURE TRIPLE-TEMPERED HIGH SPEED STEEL WITH AN OPEN-SIDED HOOK TO ALLOW SHAVINGS TO BE EJECTED WITHOUT CLOGGING. CUTTERS ARE SHARPENED WITH HAND HELD DIAMOND HONES ROTATED AROUND THE CUTTER END - INSTRUCTIONS INCLUDED. PRO-FORME STARTER KIT INCLUDES STRAIGHT BORING BAR WITH POWERHEAD CUTTER AND A PROMASTER 20" HANDLE. PRO-FORME ADVANCED KIT INCLUDES STRAIGHT, SLIGHT BEND AND HEAVY BEND BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. 1-1/8" DIAMETER PROMASTER 20" HANDLE HAS A PADDED FOAM GRIP FOR COMFORT AND CONTROL. THE 5/8" DIAMETER END COUPLERS MAKE IT POSSIBLE TO JOIN TWO OR MORE HANDLES TOGETHER FOR AN EVEN LONGER REACH. OPTIONAL PRO-SCRAPER ASSEMBLY INCLUDES TWO HIGH SPEED STEEL SCRAPER CUTTERS. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FLEXI HOLLOWERS - 155-168. IRONS TOOL GATE - 130-805. DIAMOND FLEXI-SHARP HONES - 957-706. 4-WAY DIAMOND HONE - 874-974. DIA-SHARP HONES - 115-403.
|
|
|
|
Hand Tools - Turning
|
SCORPION BORING SYSTEM
|
| Scorpion Hollowing System (std)
...plus other(s)
|
THE SCORPION BORING SYSTEM FROM DON PENCIL OFFERS 3/4" DIAMETER STRAIGHT AND SWAN NECK BORING BARS, A PISTOL GRIP, A FOREARM SUPPORT (AVAILABLE IN TWO SIZES) AND A COLLECTION OF CUTTERS FOR A COMPLETE DEEP HOLLOWING SYSTEM:
FOREARM SUPPORTS ARE AVAILABLE IN STANDARD 8-3/4" OR SHORT 6-3/4" LENGTHS AND FASTEN ONTO A PADDED STEEL PISTOL GRIP FOR LEVERAGE CONTROL. THE PISTOL GRIP ACCEPTS BORING BARS FROM OTHER SYSTEMS THROUGH A COLLECTION OF REDUCTION INSERTS PROVIDING FLEXIBILITY. COMPLETE SYSTEM INCLUDES: STRAIGHT AND SWAN NECK BORING BARS, PISTOL GRIP, ONE FOREARM REST, FOUR INSERTS AND A COMPLETE HHS CUTTER BIT SET (CUTTERS, SCRAPERS, SCREWS, HEX WRENCHES AND 3/16" ROTATING BIT SET).
STINGER MINI HOLLOWERS ARE AVAILABLE FOR SMALL HOLLOW TURNING:
BORING BAR SET INCLUDES HOOK, STRAIGHT AND SIDE CUT TOOLS, FOUR HHS CUTTING BITS, SETSCREWS, HEX WRENCH AND INSTRUCTIONS. THESE MINI BORING BARS FIT THE 3/4" SCORPION PISTOL GRIP WITH THE 7/16" REDUCTION INSERT. HANDLES CAN ALSO BE TURNED FOR THESE MINI HOLLOWERS. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KELTON TOOL GATE - 130-796. IRONS TOOL GATE - 130-805.
|
|
|
|
Hand Tools - Turning
|
PRO-PM 5 PIECE TURNING SET
|
| 5 Piece Pro-pm Turning Set
|
CROWN PRO-PM TURNING TOOLS ARE MADE FROM AN ADVANCED POWDER METALLURGY (PM) PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS. THIS ENSURES A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT RESULTING IN AN EXCEPTIONALLY HARD HIGH SPEED STEEL WITH CUTTING EDGES THAT LAST LONGER THAN TRADITIONAL HIGH SPEED STEEL. THIS SET OF FIVE TURNING TOOLS MAKES A GOOD STARTER SET FOR GENERAL BOWL AND SPINDLE TURNING:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. SET INCLUDES 3/4" ROUGHING GOUGE, 3/8" SPINDLE GOUGE, 1/2" BOWL GOUGE, 3/4" SKEW CHISEL AND 3/16" DIAMOND PARTING TOOL. 19" OAL. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM SPINDLE GOUGES - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. ELLSWORTH SIGNATURE GOUGE - 131-543. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432.
|
|
|
|
Hand Tools - Turning
|
SORBY SWAN NECK HOLLOWING TOOLS
|
| 14" Swan Neck Hollowing Tool
...plus other(s)
|
THE ROBERT SORBY SWAN NECK HOLLOWING TOOLS WILL CUT HARD-TO-REACH INSIDE WALLS AND UNDER-RIM AREAS ON ENCLOSED BOWLS AND VASES. TO AVOID TWISTING, THEY ARE USED WITH THE STRAIGHT ROUND BAR DIRECTLY BEHIND THE SWAN NECK RESTING ON THE TOOL REST. THE HIGH SPEED STEEL SWIVEL-TIP CUTTERS WORK ON BOTH SIDE AND END GRAIN AND CAN BE POSITIONED FOR THE MOST EFFECTIVE CUTTING ANGLE. THESE TOOLS ARE DESIGNED TO WORK WITH THE COMPANION STRAIGHT SHAFTED SORBY PROBE HOLLOWING TOOLS WHICH ARE USED FOR INITIAL HOLLOWING AND DEEP BORING. TO TAKE THE GUESSWORK OUT OF DETERMINING WALL THICKNESS THROUGH RESTRICTED OPENINGS, OPTIONAL WALL THICKNESS GAUGES ARE AVAILABLE FOR THE 14" AND 20" SWAN NECK TOOLS:
14" OAL X 3/8" BAR DIAMETER 851H. 20" OAL X 1/2" BAR DIAMETER - 855H. 24" OAL X 5/8" BAR DIAMETER - 859H. 854 GAUGE FITS 14" 851H SWAN NECK TOOL. 857H GAUGE FITS 20" 855H SWAN NECK TOOL. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY PROBE HOLLOWING TOOLS - 131-510. SORBY REPLACEMENT CUTTERS - 137-213.
|
|
|
|
Hand Tools - Turning
|
SORBY REPLACEMENT CUTTERS
|
| Bullet Tip Cutter For 851h, 855h,
...plus other(s)
|
THESE ROBERT SORBY PROBE AND SWAN NECK HOLLOWING TOOL REPLACEMENT CUTTERS ARE MADE FOR SMOOTHER PERFORMANCE AND LONGER LIFE:
MADE OF SHEFFIELD HIGH SPEED STEEL. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY PROBE HOLLOWING TOOLS - 131-510. SORBY SWAN NECK HOLLOWING TOOLS - 137-204.
|
|
|
Click for More Info
|
Hand Tools - Turning
|
SORBY WALL THICKNESS GAUGES
|
| Wall Thickness Gauge For 851h
...plus other(s)
|
THE ROBERT SORBY WALL THICKNESS GAUGES TAKE THE GUESS WORK OUT OF DETERMINING WALL THICKNESS, PARTICULARLY WITH BLIND TURNING THROUGH NARROW OPENINGS. THE GAUGES ARE DESIGNED TO WORK WITH THE SORBY SWAN NECK HOLLOWING TOOLS AND ARE FULLY ADJUSTABLE TO THE DESIRED THICKNESS:
854 GAUGE WORKS WITH SORBY 851H 14" SWAN NECK TOOL. 857H GAUGE WORKS WITH SORBY 855H 20" SWAN NECK TOOL. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY SWAN NECK HOLLOWING TOOLS - 137-204.
|
|
|
|
Hand Tools - Turning
|
SORBY THREAD CUTTING SYSTEM
|
| 10 Tpi Thread Cutters, Pair
...plus other(s)
|
THE ROBERT SORBY THREAD CUTTING SYSTEM WILL HELP YOU PRODUCE CONSISTENT THREADS ON BOXES, LAMPS, MUSICAL INSTRUMENTS OR WHERE EVER THREADING IS DESIRED. THREAD CUTTERS ARE DESIGNED WITH A UNIQUE HELIX SHAPE SPECIFICALLY FOR CUTTING WOOD AND ARE AVAILABLE IN INTERNAL/EXTERNAL PAIRS AT 10, 16 AND 20 THREADS PER INCH - THE 10 TPI SET IS USED FOR LARGER WORK WHILE THE 20 TPI SET IS USED FOR VERY FINE WORK. THE THREAD AND SIZING GAUGE IS USED TO CORRECTLY SIZE THE WOOD COMPONENTS PRIOR TO CUTTING. IT IS CALIBRATED FOR 10, 16 AND 20 TPI WITH A FOURTH UNMARKED ANVIL FOR PUSH FITS. ALSO AVAILABLE IS A RELIEF CUTTING TOOL USED TO PRODUCE THE NECESSARY RECESS ON THE END OF INTERNAL THREADS. A COMPANION FOCUS ON THREAD CUTTING DVD SHOWS ALL THE TECHNIQUES AND PROCEDURES USED TO PRODUCE PERFECT THREADS INCLUDING THREE SAMPLE PROJECTS:
OPTIONAL THREAD CUTTING SUPPORT TOOL GIVES SUPPORT TO THE INTERNAL CUTTER MAKING CONSISTENT INTERNAL THREADING EASIER, PARTICULARLY ON LONG PRODUCTION RUNS. THREADED CUTTERS AVAILABLE IN PAIRS ONLY. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SORBY CHATTERTOOL
|
| Chattertool Kit
...plus other(s)
|
PRODUCE AN ENDLESS VARIETY OF DECORATIVE PATTERNS ON WOOD TURNINGS WITH THE SORBY CHATTERTOOL KIT. THE FLEXIBLE STEEL CUTTERS VIBRATE AT DIFFERENT FREQUENCIES DEPENDING ON THE SPEED OF THE LATHE, THE LENGTH THE CUTTER EXTENDS FROM THE TOOL AND THE TYPE OF WOOD USED. THE POSITION, ANGLE OF APPROACH AND THE SLOPE OF THE CUTTER WILL ALSO VARY THE PATTERN PRODUCING AN ARRAY OF DESIGNS ON END GRAIN WOOD. THE CHATTERTOOL ALSO DOUBLES AS A SHEAR SCRAPER WHEN USING THE RS222 TEARDROP SCRAPER CUTTER:
CHATTERTOOL KIT INCLUDES CHATTERTOOL, TWO CHATTER CUTTERS AND ONE TEARDROP SCRAPER CUTTER. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
WOODWORKER'S SUPPLY® HEAVY FINISHING SCRAPERS
|
| 1-1/2" Heavy Square Scraper
...plus other(s)
|
WOODWORKER'S SUPPLY® HIGH SPEED STEEL FINISHING SCRAPERS ARE DESIGNED FOR BALANCE, CONTROL AND SUPERIOR CUTTING PERFORMANCE. THEY ARE COMMONLY USED FOR FINAL SHAPING AND FOR PRODUCING A VERY SMOOTH SURFACE ON THE INSIDE AND OUTSIDE WALLS OF BOWLS. THE HEFTY 1-1/2" WIDE BY 5/6" THICK CUTTING ENDS DAMPEN VIBRATIONS FOR SMOOTH, EVEN CUTS. THEY ARE PARTICULARLY EFFECTIVE WHEN USED ON EDGE AT HIGH SPEEDS IN A SHEAR CUTTING ACTION. THE ROUND FACE SCRAPERS ARE USED ON THE INSIDE WALLS OF BOWLS AND THE FLAT FACED SCRAPERS ON THE OUTSIDE WALLS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE CLOSE-GRAINED BEECH HANDLES ARE ERGONOMICALLY DESIGNED FOR MAXIMUM HANDLING COMFORT:
HIGHLY FINISHED ROSEWOOD COLORED HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 22-1/2" OAL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
BOWL GOUGES
|
| 3/8" Bowl Gouge
...plus other(s)
|
DESIGNED BY WOODWORKER'S SUPPLY® AND MANUFACTURED BY CROWN TOOLS OF ENGLAND, THESE QUALITY HIGH SPEED STEEL BOWL GOUGES ARE ENGINEERED FOR BALANCE, CONTROL AND SUPERIOR CUTTING PERFORMANCE. THEY ARE DEEPLY FLUTED WITH A TRADITIONAL FINGERNAIL GRIND FOR FACEPLATE BOWL TURNING. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE CLOSE-GRAINED BEECH HANDLES ARE ERGONOMICALLY DESIGNED TO PROVIDE MAXIMUM COMFORT DURING LONG TURNING SESSIONS. LONG BOWL GOUGES PROVIDE ADDITIONAL LEVERAGE IN DEEP HOLLOWING. SIZES ARE ACTUAL BAR DIAMETERS:
ROSEWOOD COLORED BEECH HANDLES HAVE SOLID BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19-1/2" OAL BOWL GOUGES; 26" OAL LONG BOWL GOUGES. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE WOODWORKER'S SUPPLY® 8 PIECE BOWL AND SPINDLE SET - 142-607.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HSS 8 PIECE BOWL AND SPINDLE SET - 142-607. HSS 5 PIECE BOWL TURNING SET - 142-601. HSS 5 PIECE SPINDLE TURNING SET - 142-604. HSS SQUARE CHISELS - 142-520. HSS SKEW CHISELS - 142-532. HSS OVAL SKEW CHISELS - 142-544. HSS ROUND SKEW CHISELS - 142-556. HSS ROLLED EDGE SKEW CHISELS - 142-562. HSS BEADING/PARTING CHISELS - 142-574. HSS DIAMOND PARTING TOOL - 142-577. HSS ROUGHING GOUGES - 142-478. HSS SPINDLE GOUGES - 142-460. HSS DETAIL GOUGES - 142-472. HSS SIDE GRIND BOWL GOUGES - 142-448. HSS SQUARE SCRAPERS - 142-484. HSS ROUND NOSE SCRAPERS - 142-496. HSS HOOK NOSED SCRAPERS - 142-514. HSS SPEARPOINT SCRAPER - 142-511. HSS HEAVY FINISHING SCRAPERS - 142-244.
|
|
|
|
Hand Tools - Turning
|
SIDE GRIND BOWL GOUGES
|
| 1/2" Side Grind Bowl Gouge
...plus other(s)
|
|
|
|
Hand Tools - Turning
|
SPINDLE GOUGES
|
| 1/4" Spindle Gouge
...plus other(s)
|
DESIGNED BY WOODWORKER'S SUPPLY® AND MANUFACTURED BY CROWN TOOLS OF ENGLAND, THESE QUALITY HIGH SPEED STEEL SPINDLE GOUGES ARE ENGINEERED FOR BALANCE, CONTROL AND SUPERIOR CUTTING PERFORMANCE. THESE TOOLS HAVE THE TRADITIONAL SHALLOW SWEEP FOR MAKING COVES, BEADS AND MINOR ROUGHING CUTS BETWEEN CENTERS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE CLOSE-GRAINED BEECH HANDLES ARE DESIGNED FOR MAXIMUM HANDLING COMFORT:
ROSEWOOD COLORED BEECH HANDLES HAVE SOLID BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19-1/2" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE WOODWORKER'S SUPPLY® 8 PIECE BOWL AND SPINDLE SET - 142-607.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HSS 8 PIECE BOWL AND SPINDLE SET - 142-607. HSS 5 PIECE BOWL TURNING SET - 142-601. HSS 5 PIECE SPINDLE TURNING SET - 142-604. HSS SQUARE CHISELS - 142-520. HSS SKEW CHISELS - 142-532. HSS OVAL SKEW CHISELS - 142-544. HSS ROUND SKEW CHISELS - 142-556. HSS ROLLED EDGE SKEW CHISELS - 142-562. HSS BEADING/PARTING CHISELS - 142-574. HSS DIAMOND PARTING TOOL - 142-577. HSS ROUGHING GOUGES - 142-478. HSS DETAIL GOUGES - 142-472. HSS BOWL GOUGES - 142-430. HSS SQUARE SCRAPERS - 142-484. HSS ROUND NOSE SCRAPERS - 142-496. HSS HOOK NOSED SCRAPERS - 142-514. HSS SPEARPOINT SCRAPER - 142-511. HSS HEAVY FINISHING SCRAPERS - 142-244.
|
|
|
|
Advanced Search Tools
Browse
