|
|
|
Hand Tools - Turning
|
TERMITE WOODTURNING TOOL EXCELS AT END GRAIN HOLLOWING
|
| Termite Hollowing Tool Package
...plus other(s)
|
PRECISE GEOMETRY AND PRECISION MACHINING ON COMPUTER-DRIVEN MACHINES ARE WHAT MAKE THE ONEWAY TERMITE END GRAIN HOLLOWING TOOL PACKAGE GREAT FOR END GRAIN HOLLOWING AS WELL AS FINISHING CUTS ON ANY FLAT OR CURVED SURFACE:
HIGH SPEED STEEL TERMITE BITS MOUNT INTO THE END OF THE 7-1/2" LONG, 110,000 PSI TENSILE STRENGTH STEEL SHANK USING A SET SCREW. FITTED INTO A MAPLE HANDLE, THE SHANK IS HELD IN PLACE WITH A BRASS FERRULE (TOOL IS 22-3/16" OVERALL WITHOUT BIT). PACKAGE INCLUDES SHANK, HARDWOOD HANDLE, #1 (3/8" DIA.) AND #2 (1/2" DIA.) TERMITE BITS, ALUMINUM OXIDE GRINDING POINT W/1/4" SHANK, 2"L X 3/4W X 3/8"H DRESSING STONE, 7/8" X 2" DIA. GRINDING BLOCK W/SET SCREW, 3MM HEX WRENCH AND INSTRUCTIONS. CANADA.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM SPINDLE GOUGES
|
| 3/8" Pro-pm Spindle Gouge
...plus other(s)
|
CROWN PRO-PM SPINDLE GOUGES HAVE THE TRADITIONAL FINGERNAIL GRIND FOR DOING LIGHT HOLLOWS, BEADS AND GENERAL SPINDLE WORK:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 19" OAL; BLACK ASH HANDLE. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM LONG BOWL GOUGES
|
| 3/8" Pro-pm Long Bowl Gouge
...plus other(s)
|
SPECIFICALLY DESIGNED FOR DEEP FACEPLATE TURNING, CROWN PRO-PM LONG BOWL GOUGES ARE ENGINEERED TO STAY SHARP LONGER:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 26" OAL; 16" LONG BLACK ASH HANDLES. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' MICRO PARTING TURNING TOOL
|
| 1/16" Thin Parting Tool
|
THE CROWN MICRO PARTING TURNING TOOL HAS A THIN 1/16" CHISEL POINT THAT WORKS ESPECIALLY WELL IN PARTING SMALLER PROJECTS AND WHERE A VERY SMALL CUTTING POINT IS REQUIRED:
HIGH QUALITY HIGH SPEED STEEL BLADE. 9-1/2" OAL; HIGHLY FINISHED BEECH HANDLE WITH BRASS FERRULE. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM SQUARE SCRAPER
|
| 3/4" Pro-pm Square Scraper
|
DESIGNED FOR FLAT AND CORNER CUTS, THE CROWN PRO-PM SQUARE SCRAPER CAN ALSO BE USED AS TOOL STOCK FOR GRINDING YOUR OWN SHAPES:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 19" OAL; BLACK ASH HANDLE. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM ROUND NOSE SCRAPER
|
| 3/4" Pro-pm Round Nose Scraper
|
THE CROWN PRO-PM ROUND NOSE SCRAPER IS AN ALL AROUND TOOL FOR GENERAL ROUGHING WORK AND HIGH SPEED SHEAR CUTTING WHEN USED ON EDGE:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 19" OAL; BLACK ASH HANDLE. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM SKEW CHISELS
|
| 3/4" Pro-pm Skew Chisel
|
CROWN PRO-PM SKEW CHISELS ARE TRADITIONAL TOOLS FOR BEADING AND PLANING DURING GENERAL SPINDLE WORK:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 19" OAL; BLACK ASH HANDLE. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM DIAMOND PARTING TOOL
|
| 3/16" Pro-pm Diamond Parting Tool
|
THE CROWN PRO-PM DIAMOND PARTING TOOL CUTS COOLER AND THE EDGE LASTS LONGER THAN HSS TURNING TOOL COUNTERPARTS:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 19" OAL; BLACK ASH HANDLE. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' WEDGE TURNING TOOL MAKES SUPERB COVES AND MORE
|
| 3/8" Wedge Tool
...plus other(s)
|
GREAT FOR COVES ON SPINDLE OR FACEPLATE WORK, CROWN TOOLS' WEDGE TURNING TOOL IS ALSO EFFECTIVE FOR FINE FINISHING CUTS ON SMALL BOWLS AND GOBLETS:
8-1/2" HIGH SPEED STEEL BLADE; BEECH HANDLE WITH BRASS FERRULE; APPROXIMATELY 15" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' 3 POINT TURNING TOOL
|
| 3/8" Three Point Tool
...plus other(s)
|
A UNIQUE, MULTI-PURPOSE TOOL THAT CAN BE USED AS A SKEW, CROWN TOOLS' 3 POINT TURNING TOOL IS ALSO EFFECTIVE FOR END GRAIN PLANING, SHOULDER WORK, BEADING, FACEPLATE AND OTHER SPINDLE WORK:
HIGH SPEED STEEL BLADE WITH 4-1/2" BEECH HANDLE AND BRASS FERRULE; 10-1/4" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
WORLD-CLASS HSS BOWL GOUGE TURNING TOOL
|
| 5/8" Ellsworth Bowl Gouge
|
CROWN TOOLS 242EW "ELLSWORTH SIGNATURE" BOWL GOUGE FEATURES THE EDGE AND BALANCE NEEDED FOR THE FINEST WOODTURNING PROJECTS:
5/8"-DEEP FLUTED GOUGE IS MANUFACTURED USING HIGH SPEED STEEL (HSS). 10" LONG BLADE IS HELD IN SPECIALLY SHAPED 17" LONG BEECH HANDLE WITH A HEAVY BRASS FERRULE. WEIGHS 1.6 LBS. (VINYL STORAGE SLEEVE INCLUDED). ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SKEWJY GOUGE IS A MULTIPURPOSE TURNING TOOL
|
| 3/8" Alan Beecham Skewjy Gouge
...plus other(s)
|
THE "ALAN BEECHAM" SKEWJY GOUGE PERFORMS THE FUNCTIONS OF BOTH A SKEW AND A GOUGE WITH A REDUCED CHANCE OF "CATCH":
3/8" THICK HIGH SPEED STEEL CUTTER. 19-1/2" OVERALL TOOL LENGTH. VERSATILE TURNING TOOL WORKS EQUALLY WELL ON HARD AND SOFT WOODS. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
ROLLED EDGE RADIUS SKEW TURNING TOOL FEATURES IMPROVEMENTS
|
| 3/4" Rolled Edge Radius Skew
|
ALL OF THE IMPROVEMENTS THAT CAN BE MADE TO THE TRADITIONAL SKEW HAVE COME TOGETHER IN WOODWORKER'S SUPPLY 3/4" ROLLED EDGE RADIUS SKEW:
CUTTING EDGE FEATURES DOUBLE BEVEL GROUND TO SMOOTH RADIUS SHAPE, GREATLY REDUCING THE TENDENCY TO "CATCH" DURING USE. ROLLED SHANK EDGES ALLOW FOR SMOOTH TRANSITIONS FROM HORIZONTAL TO VERTICAL CUTTING WITHOUT THE "BUMP" ASSOCIATED WITH SQUARE EDGE SKEWS. HIGH SPEED STEEL BLADE. 19-1/2" OVERALL LENGTH. 12-1/2" BEECH HANDLE AND BRASS FERRULE. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
HEAVYWEIGHT ROUND NOSE SCRAPER TURNING TOOL
|
| 1/2" Heavy Wt Round Nose Scraper
|
|
1/2" X 1/2" ROUND NOSE SCRAPER TURNING TOOL CROSS SECTION PROVIDES EXCEPTIONAL SUPPORT FOR HEAVY SCRAPING CUTS IN TOUGH OR HIGHLY FIGURED WOOD. HIGH SPEED STEEL BLADE. 20" OVERALL LENGTH INCLUDING 11-1/2" BEECH HANDLE. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
WOODTURNING HOLLOWING AND SCRAPING TOOLS DESIGNED TO FIT THE WORK
|
| Multi-tip Scraper
...plus other(s)
|
|
INSTEAD OF MAKING DO WITH A WOODTURNING TOOL THAT DOESN'T FIT THE PROFILE, THE CROWN MULTI-TIP SCRAPER PROVIDES A FULL RANGE OF INTERCHANGEABLE SHAPES ON ONE HANDLE. HIGH SPEED STEEL (HSS) 1" DIA. ROUND, 1" SQUARE AND 1" X 1-1/2" PEAR SHAPED CUTTERS ARE ALMOST 1/4" THICK. SCRAPER IS 15" LONG WITH 8-1/2" WOODEN HANDLE. DESIGNED FOR DEEP HOLLOW FORMS, THE 14" LONG "BEAVER" DEEP HOLLOWING TOOL HAS A POLISHED HSS ADJUSTABLE TOP SECTION TO GIVE COMPLETE DEPTH OF CUT CONTROL. ADDITIONAL VERSATILITY IS PROVIDED BY ITS 14" LONG COUSIN, THE "SWAN NECK BEAVER" DEEP HOLLOWING TOOL. COMPLETE INSTRUCTIONS INCLUDED. ALL MADE IN ENGLAND.
|
|
|
|
Hand Tools - Turning
|
5 PIECE MIDI WOODTURNING SET FOR SMALLER PROJECTS
|
| 5 Piece Midi Woodturning Set
|
THIS FIVE PIECE MIDI WOODTURNING SET IS IDEAL FOR SMALL, DETAILED TURNING PROJECTS:
INCLUDES HSS 1/4" SPINDLE ROUGHING GOUGE, 1/8" SPINDLE GOUGE, 1/4" ROUND NOSE SCRAPER, 3/32" PARTING TOOL AND 1/4" SKEW CHISEL. EACH IS APPROXIMATELY 10" LONG, INCLUDING WOOD HANDLE. ALL FIT INSIDE OF A HINGED, WOOD STORAGE CASE. WEIGHS 1-1/2 LBS. IMPORTED. LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hand Tools - Turning
|
BOX SCRAPERS ARE THE CHOICE FOR CLEANING OUT SMALL WOODEN BOXES AND GOBLETS
|
| 1/4" (6mm) Box Scraper
...plus other(s)
|
DESIGNED BY CROWN TOOLS AND PROFESSIONAL BRITISH WOODTURNER ALBERT HARRISON, THESE BOX SCRAPERS ENSURE A VERY CLEAN FINISH:
1/4" SCRAPER HAS A 6-1/8" LONG HIGH SPEED STEEL BLADE - 3/8" SCRAPER HAS A 6-3/4" LONG BLADE. HANDLES ARE 8-1/2" LONG WITH BRASS FERRULES. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
RING TOOLS ARE THE CHOICE WHEN WORKING WITH END GRAIN
|
| 1/2" (13mm) Ring Tool
...plus other(s)
|
SQUARE HOLLOWING TOOLS LET YOU WORK THROUGH A HOLE AS SMALL AS 3/8" TO A DEPTH OF 4":
1/4" SQUARE HIGH SPEED STEEL BLADES ENSURE GOOD EDGE HOLDING. 5-1/4" LONG BLADES ARE SET INTO 8-1/2" LONG WOODEN HANDLES WITH BRASS FERRULES. CHOOSE FROM 45° OR 80° BENDS.
WITH A DUAL BEVEL HIGH SPEED STEEL RING, RING TOOLS PROVIDE A SUPERB FINISH WHEN HOLLOWING INTO END GRAIN:
EASILY ACCOMMODATE FLAT OR CURVED SURFACES. 1/2" TOOL HAS 6-3/4" LONG BLADE AND 8-1/2" LONG WOODEN HANDLE - 1" TOOL HAS 11" BLADE AND 14" HANDLE. BOTH FEATURE BRASS FERRULES FOR STRENGTH. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
WOODTURNING DETAIL GOUGES EXCEL AT CUTTING COVES AND BEADS
|
| 3/8" (10mm) Detail Gouge
...plus other(s)
|
THE SHALLOW FLUTE ON CROWN TOOLS' DETAIL GOUGES PERMITS A SMOOTHER CUT AND RESULTS IN LESS VIBRATION DUE TO MORE METAL BEING UNDER THE FLUTE:
7" LONG HIGH SPEED STEEL BLADES - 12-1/2" LONG WOODEN HANDLES WITH BRASS FERRULES. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
USE THE "BILL JONES" ROUND NOSE SCRAPER FOR "GENTLE ROUGHING"
|
| "bill Jones" 1/8" Scraper
|
THE FRONT AND SIDES OF CROWN TOOLS' "BILL JONES" ROUND NOSE SCRAPER WILL TURN BEAUTIFULLY AND GENTLY WITHOUT DIGGING IN, SO IT CAN BE USED FOR DELICATE ROUGHING WHERE A GOUGE MIGHT NOT BE SUITABLE:
5-7/8" LONG HIGH SPEED STEEL BLADE - 4-1/2" LONG WOODEN HANDLE WITH BRASS FERRULE. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
ONEWAY SURE-GRIP HANDLES
|
| Sure-grip 17-1/2" Long Tool Handle
...plus other(s)
|
AVAILABLE IN 12" AND 17-1/2" LENGTHS, ONEWAY SURE-GRIP HANDLES ARE HEAVY DUTY STEEL, COATED WITH THICK PLASTIC FOR A COMFORTABLE NON-SLIP GRIP:
EACH HANDLE HAS A 1/2" BORE ON ONE END AND A 5/8" BORE ON THE OTHER PLUS TWO SET SCREWS FOR MOUNTING GOUGE BLADES AND OTHER BORING BAR TOOLS. OPTIONAL HANDLE ADAPTERS EXTEND THE RANGE OF AVAILABLE TOOLS TO INCLUDE 3/8" AND 3/4". HANDLES WILL FIT ONEWAY GOUGE BLADES, PRO-FORME TOOLS, KELTON TOOLS AND "SCORPION" TOOLS. CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY GOUGE BLADES - 129-719. PRO-FORME TOOLS - 131-552. KELTON TOOLS - 961-920. "SCORPION" TOOLS - 137-057. IRONS TOOL GATE - 130-805. KELTON TOOL GATE - 130-796.
|
|
|
|
Hand Tools - Turning
|
ONEWAY MASTERCUT BOWL GOUGE TURNING TOOL BLADES
|
| Mastercut 3/8" Bowl Gouge Blade
...plus other(s)
|
MADE OF CPM M4 HIGH SPEED STEEL, ONEWAY MASTERCUT BOWL GOUGE TURNING TOOL BLADES WILL HOLD AN EDGE UP TO THREE TIMES LONGER THAN STANDARD HSS AND BECAUSE OF THE UNIFORM CONSISTENCY OF THE METAL, THESE BLADES WILL SHARPEN EASIER AND HAVE A LONGER LIFE:
3/8" GOUGE HAS A TIGHT FLUTE USEFUL FOR FINE FINISHING; 1/2" HAS A MEDIUM DEEP FLUTE FOR FINE FINISHING CUTS INSIDE AND OUTSIDE OF BOWLS; AND THE 5/8" GOUGE HAS A LARGE, OPEN FLUTE TO ALLOW MAXIMUM CHIP FLOW. 12-5/8" LONG (HANDLES NOT INCLUDED). BLADES WILL FIT ONEWAY AND KELTON HANDLES; 5/8" BLADE FITS PRO-FORME HANDLE. CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY HANDLES - 129-683. KELTON HANDLES - 130-776. PRO-FORME HANDLES - 130-817.
|
|
|
|
Hand Tools - Turning
|
PROXXON MICRO TURNING LATHE
|
| 3 Pc Chisel Set For Lathe
...plus other(s)
|
THE GERMAN-ENGINEERED PROXXON MODEL DB 250 MICRO WOODTURNING LATHE IS PERFECT FOR TURNING SMALL ITEMS SUCH AS PENS, CHESS FIGURES, MINIATURES AND MUCH MORE IN A QUIET, VIBRATION-FREE OPERATION. THE TOOL REST ROTATES 360°. FREE ACCESSORIES ADD ADDITIONAL VALUE TO THIS GERMAN MADE MICRO TURNING LATHE:
INCLUDES ROTATING TOOL REST, DRIVE CENTER, LIVE CENTER, FACEPLATES, 6-PIECE COLLET SET (2, 3, 4, 6, 8 AND 10MM), 3-PIECE TURNING SET, SAFETY GOGGLES AND SANDPAPER. NET WEIGHT - 5.5 LBS. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. GERMANY.
SPECIFICATIONS:
MOTOR - 1/5HP, 120VAC, 1PH. SPEED RANGE - 1,000 TO 5,000 RPM. SWING OVER BED - 3-1/8". DISTANCE BETWEEN CENTERS - 9-3/4". HEADSTOCK THROUGH HOLE - 3/8" (10MM). TAILSTOCK QUILL TRAVEL - 3/4". OVERALL DIMENSIONS - 21-5/8"L X 3-7/8"W X 6-1/8"H.
|
|
|
|
Hand Tools - Turning
|
KELTON HOLLOWING RIG SYSTEM TAMES TURNING TORSION
|
| Kelton Hollowing Rig
...plus other(s)
|
TORTIONAL FORCES CREATED DURING HOLLOWING CAN BE A CHALLENGE TO EVEN THE MOST PRACTICED WOODTURNER. THE KELTON HOLLOWING RIG PREVENTS TORSIONAL TWIST BY HOLDING THE BAR AND CUTTER RIGID ALLOWING FULL CONTROL OVER LATERAL AND DEPTH ADJUSTMENT - FITS ALL BEDS AND SWINGS UP TO 24":
ALLOWS BORING BAR AND HOLLOWER ANGLE ADJUSTMENTS FOR SMOOTHER CUTTING AND CAN BE USED ON EITHER THE INBOARD OR OUTBOARD SIDE OF THE LATHE. OPTIONAL LASER GUIDE FRAME ATTACHES TO THE HOLLOWING RIG (LASER NOT INCLUDED). ADDING A LASER ALLOWS YOU TO ACCURATELY DETERMINE WHEN YOU HAVE ATTAINED YOUR DESIRED WALL THICKNESS. OPTIONAL EXTRA HEAVY 1-1/2" DIA. X 21" BORING BAR FOR VERY DEEP HOLLOWING APPLICATIONS. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
KELTON HOLLOWER TOOLS - 130-784. KELTON 24" COMBO HANDLE - 130-772.
|
|
|
|
Hand Tools - Turning
|
ADJUSTABLE GATE PROVIDES EXTRA SUPPORT NEEDED DURING DEEP HOLLOWING
|
| Kelton Tool Gate For 1" Post
...plus other(s)
|
THE U-SHAPED, 7/8" WIDE KELTON HOLLOWING GATE IS A TOOL REST THAT PROVIDES THE ADDITIONAL LEVERAGE AND SUPPORT NECESSARY TO CONTROL CUTTING TOOLS DURING ADVANCED HOLLOWING OPERATIONS:
A SOLID, DEPTH ADJUSTABLE TOOL, THE GATE FEATURES A SWIVEL HEAD WITH ROUND HARDENED ROLL PIN. WILL SUPORT KELTON, PRO-FORME AND "SCORPION" BORING BARS. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KELTON TOOLS - 961-920. PRO-FORME TOOLS - 131-552. "SCORPION" TOOLS - 137-057.
|
|
|
|
Hand Tools - Turning
|
IRONS TOOL GATE PROVIDES EXCELLENT WOODTURNING CONTROL
|
| Irons Tool Gate For 1" Post
...plus other(s)
|
THE WOODCUT® IRONS TOOL GATE PIVOTING SADDLE FIRMLY SUPPORTS PRO-FORME AND OTHER ROUND SHAFT TURNING TOOLS WHILE CUTTING:
GATE EXTENSION PLATFORM FIRMLY CONNECTS TO TOOL SUPPORT POST WHILE AN ADJUSTABLE LOCKING COLLAR CAN BE TIGHTENED ONCE PROPER TOOL HEIGHT HAS BEEN SET. 5/8" AND 1-1/8" "U" SHAPED TOOL GUIDES, PLATFORM AND TOOL POST INCLUDED. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-FORME TOOLS - 131-552.
|
|
|
|
Hand Tools - Turning
|
CUP HOLLOWING TOOL DESIGNED FOR END GRAIN WOODTURNING
|
| Cup Hollowing Tool - Handled
...plus other(s)
|
THE WOODCUT® CUP HOLLOWING TOOL IS SPECIFICALLY INTENDED FOR TURNING BOWLS, CUPS, GOBLETS AND SMALL VASES FROM THE INSIDE OUTWARDS:
TOOL CUTS ON ITS SIDE WITH THE CUTTER BEVEL RUBBING AGAINST THE SIDEWALL, SLICING CLEANLY AROUND THE BOTTOM CURVE OF CONVEX FORMS. ESPECIALLY EFFECTIVE WITH CURLY GRAIN. NEW ZEALAND.
|
|
|
|
Hand Tools - Turning
|
ROBERT SORBY END GRAIN HOLLOWING TOOLS
|
| 3/8" X 20" Probe Hollowing Tool
...plus other(s)
|
DESIGNED TO WORK THROUGH THE NARROWEST OPENINGS, SWIVEL TIP, STRAIGHT SHAFT ROBERT SORBY PROBE HOLLOWING TOOLS ARE PARTICULARLY USEFUL WHEN TURNING VASES AND DEEP VESSELS:
20" TOOL IS FITTED WITH A GENERAL PURPOSE CUTTER; 24" TOOL HAS A BULLET CUTTER FOR RAPID STOCK REMOVAL. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY REPLACEMENT CUTTERS - 137-213.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM ROUGHING GOUGES
|
| 3/4" Pm Spindle Roughing Gouge
|
A CROWN PRO-PM ROUGHING GOUGE IS THE IDEAL TOOL FOR ROUNDING OUT SQUARE STOCK BETWEEN CENTERS:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 19" OAL; BLACK ASH HANDLE. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM DETAIL GOUGES
|
| 3/8" Pro-pm Detail Gouge
...plus other(s)
|
IDEAL FOR CUTTING COVES, BEADS AND LIGHT HOLLOWING, CROWN PRO-PM DETAIL GOUGES FEATURE MORE METAL UNDER THE SHALLOW FLUTES AND LONGER SIDE GRINDS TO PRODUCE SMOOTHER CUTS WITH LESS VIBRATION:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 19" OAL; BLACK ASH HANDLE. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
ELLSWORTH PRO-PM SIGNATURE GOUGE
|
| 5/8" Pro-pm Ellsworth Gouge
|
THE ELLSWORTH PRO-PM 5/8" SIGNATURE GOUGE IS A PREMIUM SIDE-GRIND BOWL GOUGE DESIGNED FOR MAXIMUM DEEP HOLLOWING:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTRUDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 7/8" DIAMETER BAR STOCK, 26" OAL, 16" LONG BLACK ASH HANDLE. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM BOWL GOUGES
|
| 3/4" Pm Bowl Gouge
...plus other(s)
|
DESIGNED WITH DEEPER FLUTES, THE CROWN PRO-PM BOWL GOUGE HAS THE BALANCE REQUIRED FOR TRADITIONAL BOWL TURNING:
MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTRUDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. 19" OAL; 1" GOUGE IS 25-1/2" OAL. BLACK ASH HANDLE. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING TOOL SET - 137-093.
|
|
|
|
Hand Tools - Turning
|
WOODCUT PRO-FORME TOOLS
|
| Pro-forme Advanced Kit
...plus other(s)
|
WORKING EQUALLY WELL ON FACE AND END GRAIN, THE WOODCUT® PRO-FORME HOLLOWING SYSTEM IS ACTUALLY A COMBINATION OF THREE KEY COMPONENTS - BORING BARS, CUTTERS AND EXTENSION HANDLE. THE BORING BARS COME IN THREE STYLES: STRAIGHT FOR GENERAL CUTTING OPERATIONS, SLIGHT BEND FOR INSIDE WALL CUTTING AND HEAVY BEND FOR UNDER-RIM CUTTING. THE REPLACEABLE PRO-HEAD CUTTERS HAVE AN ADJUSTABLE GAUGE FOR LIGHT OR AGGRESSIVE CUTTING DEPENDING ON WOOD SPECIES AND CUTTING OPERATION. THE PROMASTER 20 HANDLE WILL EXTEND REACH TO DEPTHS BEYOND 10":
PRO-FORME STARTER KIT COMES WITH PROMASTER HANDLE, STRAIGHT BORING BAR AND PRO-HEAD CUTTER. PRO-FORME ADVANCED KIT INCLUDES PROMASTER HANDLE, STRAIGHT, SLIGHT BEND AND HEAVY BEND BORING BARS AND 3 HOOK CUTTERS. BORING BARS HAVE A 5/8" DIAMETER SHAFT AND ARE COMPATIBLE WITH OTHER BORING BAR SYSTEMS. TRIPLE TEMPERED HSS CUTTER INCLUDED WITH EACH BORING BAR HAS AN OPEN-SIDED HOOK TO ALLOW SHAVINGS TO BE EJECTED WITHOUT CLOGGING. CUTTERS ARE SHARPENED WITH HAND HELD ABRASIVE PADS ROTATED AROUND THE CUTTER END. INSTRUCTIONS INCLUDED. 1-1/8" DIAMETER PROMASTER 20" DOUBLE ENDED HANDLE MAKES IT POSSIBLE TO TURN VESSELS DEEPER THAN 10". PADDED FOAM GRIP PROVIDES MORE CONTROL AND COMFORT. 5/8" DIAMETER END COUPLERS MAKE IT POSSIBLE TO JOIN TWO OR MORE HANDLES TOGETHER FOR AN EVEN LONGER REACH.
OPTIONAL IRONS TOOL GATE PROVIDES PIVOTING SUPPORT FOR REGULATED BORING BAR CUTS. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
IRONS TOOL GATE - 130-805. SMITHS DIAMOND PAD - 116-639. DIA-SHARP™ PADS - 115-403. DIAFOLD® SHARPENING PADS - 957-641.
|
|
|
|
Hand Tools - Turning
|
"SCORPION" AND "STINGER" HOLLOW VESSEL BORING SYSTEMS OFFER VERSATILITY
|
| Scorpion Hollowing System (std)
...plus other(s)
|
THE "SCORPION" BORING SYSTEM ACCEPTS BAR STOCK, TOOLS AND BORING BARS FROM OTHER SYSTEMS THROUGH A COLLECTION OF REDUCTION INSERTS, PROVIDING THE FLEXIBILITY THAT OTHER DEEP BORING SYSTEMS LACK:
AVAILABLE WITH STANDARD 8-3/4" OR SHORT 6-3/4" FOREARM SUPPORTS THAT FASTEN ONTO 7-1/2" LONG PADDED STEEL PISTOL GRIP FOR ADDITIONAL LEVERAGE. EACH COMES WITH TWO CHROME STEEL BORING BARS (BARS ALSO FIT KELTON AND ONEWAY HANDLES), PISTOL GRIP, ONE FOREARM REST, FOUR INSERTS AND A COMPLETE HHS CUTTER BIT SET (CUTTERS, SCRAPERS, SCREWS, HEX WRENCHES AND 3/16" ROTATING BIT SET).
THE 7/16" DIAMETER "STINGER" MINI-BORING SYSTEM IS INTENDED FOR SMALL HOLLOW TURNING: BORING BAR SET INCLUDES HOOK, STRAIGHT AND SIDE CUT TOOLS, FOUR HHS CUTTING BITS AND SETSCREWS, HEX WRENCH AND INSTRUCTIONS. BARS FIT 3/4" "SCORPION" PISTOL GRIP AND OTHER 3/4" BORING BAR HANDLES. USE 7/16" REDUCTION INSERT (137-111) IN PISTOL GRIP FOR "STINGER" MINI-BORING TOOLS. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY HANDLES - 129-683. KELTON HANDLES - 961-920. KELTON TOOL GATE - 130-796. IRONS TOOL GATE - 130-805.
|
|
|
|
Hand Tools - Turning
|
CROWN PRO-PM TURNING TOOLS DESIGNED TO LAST LONGER
|
| 5pc Pro-pm Turning Set
|
THIS FIVE PIECE SET OF ADVANCED CROWN PRO-PM TURNING TOOLS WILL MAINTAIN A CUTTING EDGE SEVERAL TIMES LONGER THAN TRADITIONAL HIGH SPEED STEEL TOOLS:
THEY ARE MADE FROM AN ADVANCED POWDER METALLURGY PROCESS WHERE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS, ENSURING A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT. A LITTLE MORE EXPENSIVE THAN TRADITIONAL HSS BUT INTENDED TO LAST A LIFETIME. ERGONOMICALLY DESIGNED AND STAINED 12-1/2" LONG BLACK ASH HANDLES - 3/4" SPINDLE ROUGHING GOUGE, 3/8" SPINDLE GOUGE, 1/2" BOWL GOUGE, 3/16" DIAMOND SECTION PARTING TOOL AND 3/4" SKEW CHISEL INCLUDED. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SWAN NECK HOLLOWING TOOLS IDEAL FOR BLIND TURNING OR UNDER CUTTING
|
| 3/8" X 14" Swan Neck Hollowng Tool
...plus other(s)
|
ROBERT SORBY SWAN NECK HOLLOWING TOOLS ARE THE PERFECT CHOICE WHERE REACH IS RESTRICTED:
FITTED WITH A GENERAL PURPOSE HSS CUTTER, THE 14" TOOL IS DESIGNED FOR END GRAIN USE ON SHALLOWER PROJECTS. ALSO FITTED WITH A GENERAL PURPOSE HSS CUTTER, THIS SIMILAR, BUT 20" LONG, SWAN NECK HOLLOWING TOOL PROVIDES SLIGHTLY MORE REACH. PRODUCED FROM MORE SUBSTANTIAL STEEL, THE 24" TOOL IS SUITABLE FOR BOTH END AND SIDE GRAIN USE - INCLUDES BULLET AND BALL END HSS CUTTERS. 137-222, 137-225 - OPTIONAL THICKNESS GAUGES ATTACH TO HOLLOWING TOOLS FOR A CONSISTENT WAY TO DETERMINE SIDEWALL THICKNESS. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY REPLACEMENT CUTTERS - 137-213.
|
|
|
|
Hand Tools - Turning
|
REPLACEMENT CUTTERS FOR ROBERT SORBY HOLLOWING TOOLS
|
| Bullet Tip Cutter For 851h, 855h,
...plus other(s)
|
DESIGNED TO WORK WITH THE COMPANY'S STRAIGHT AND SWAN NECK TOOLS, ROBERT SORBY REPLACEMENT CUTTERS ARE GENUINE O.E.M. PRODUCTS:
SHEFFIELD STEEL FOR SMOOTHER PERFORMANCE AND LONGER LIFE. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
THREAD CUTTING SYSTEM LETS YOU PRODUCE WOODTURNINGS WITH INTERNAL AND EXTERNAL THREADS
|
| 10 Tpi Thread Cutters, Int/ext
...plus other(s)
|
THREAD CUTTING IS A TIME HONORED TRADITION. THE ROBERT SORBY THREAD CUTTING SYSTEM MAKES IT POSSIBLE TO TURN 10, 16 OR 20 INTERNAL AND EXTERNAL THREADS PER INCH FEATURING A UNIQUE, ENHANCED HELIX ANGLE SPECIALLY DESIGNED FOR WOOD:
USE THE THREAD CUTTER TOOL SUPPORT TO APPLY EVEN PRESSURE ON THE THREAD CUTTERS. THE RELIEF CUTTING TOOL CLEANS UP THE BOTTOMS OF INTERNAL THREADED WALLS AND THE HANDY THREAD AND SIZING GAUGE TAKES THE GUESSWORK OUT OF DIMENSIONING. INFORMATIVE VIDEOTAPE COVERS TOOL USE AND INCLUDES SEVERAL PROJECTS. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
"CHATTER WORK" CAN PRODUCE AN ENDLESS VARIETY OF WOODTURNING PATTERNS
|
| Chatter Tool W/three Cutters
...plus other(s)
|
BOTH A SHEAR SCRAPER AND DECORATING TOOL, THE ROBERT SORBY CHATTERTOOL - WHEN FITTED WITH ONE OF ITS DOUBLE ENDED, SPRING STEEL CUTTERS - WILL EASILY PRODUCE A MYRIAD OF PATTERNS ON END GRAIN WOODS:
COMES WITH TWO CHATTER CUTTERS, SCRAPER AND COMPLETE INSTRUCTIONS. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
GLASER WOODTURNING BOWL GOUGES - BEST ON THE MARKET
|
| 3/8" A-11 Deep Fluted Bowl Gouge
...plus other(s)
|
MADE USING ADVANCED PARTICLE STEELS, GLASER ENGINEERING HITEC BOWL GOUGES ARE THE BEST ON THE MARKET. YEARS OF EXPERIENCE HAVE PRODUCED A DEEP NARROW FLUTE DESIGN WITH A MULTI-BEVELED, SIDE GRIND MAKING BOWL TURNING A PLEASURE, EVEN ON KILN DRIED HARDWOODS:
A-11 TOOLS HOLD AN EDGE 5 TIMES LONGER THAN M2 HSS AND THE V-15 TOOLS HOLD AN EDGE 40% LONGER THAN THE A-11. 3/8" GOUGE HAS AN 8" BLADE AND 12" HANDLE. 1/2" AND 5/8" GOUGES HAVE 8" BLADES WITH 16" HANDLES. 1-1/4" DIA. HOLLOW EXTRUDED ALUMINUM HANDLES ARE FILLED WITH LEAD SHOT TO DAMPEN VIBRATION; SHOT PEENED FOR A NONSLIP GRIP AND ANODIZED TO REDUCE WEAR. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Please Wait......Searching....
to see Sub Categories)
