|
|
|
Adhesives - Water Based
|
TITEBOND® DARK WOOD GLUE MAKES GLUE LINES LESS VISIBLE IN DARKER WOOD
|
| Titebond Ii Dark Wood Glue
...plus other(s)
|
TITEBOND® II DARK WOOD GLUE IS A DYED VERSION OF TITEBOND II WOOD GLUE:
DARKER COLOR HELPS MAKE GLUE JOINTS IN DARK WOOD SUCH AS WALNUT LESS VISIBLE. SO WATER RESISTANT, IT'S THE ONLY ONE-PART GLUE TO PASS ANSI/HPVA TYPE II WATER-RESISTANCE SPECIFICATIONS (NOT INTENDED FOR CONTINUOUS SUBMERSION). IDEAL FOR INDOOR AND OUTDOOR USE. SANDS EASILY. 3600 PSI BOND STRENGTH AT ROOM TEMPERATURE. OPEN ASSEMBLY TIME: 5 MINUTES. SET TIME: 24 HOURS. EASY CLEANUP USING A DAMP RAG WHILE WET. USA. TITEBOND DARK GLUE IS ONLY AVAILABLE IN THE TITEBOND II VERSION.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® III ULTIMATE WOOD GLUE IS SAFER TO USE AND WATERPROOF
|
| Titebond Iii Ultimate Wood Glue
...plus other(s)
|
TITEBOND® III ULTIMATE WOOD GLUE IS THE ULTIMATE IN WOOD GLUES - IDEAL FOR BOTH INTERIOR AND EXTERIOR APPLICATIONS. YOU GET SUPERIOR BOND STRENGTH, LONGER OPEN ASSEMBLY TIME AND LOWER APPLICATION TEMPERATURE (NOT INTENDED FOR CONTINUOUS SUBMERSION):
STRONG INITIAL TACK, SANDS EASILY WITHOUT SOFTENING AND FDA-APPROVED FOR INDIRECT FOOD CONTACT (CUTTING BOARDS). USE AS AN ECONOMICAL SUBSTITUTE FOR POLYURETHANE WHEN GLUING UP MOST EXTERIOR WOOD PASSES ANSI/HPVA TYPE I WATER-RESISTANT TESTING. 4000 PSI BOND STRENGTH AT ROOM TEMPERATURE. UNAFFECTED BY FINISHES. OPEN ASSEMBLY TIME: 10 MINUTES. SET TIME: 12 HOURS. CLEANS UP WITH A DAMP CLOTH WHILE WET. USA.
|
|
|
|
Adhesives - Water Based
|
J.E. MOSER'S CRITICAL BOND II WOOD GLUE
|
| Critical Bond Ii Wood Glue
...plus other(s)
|
CRITICAL BOND II™ WOODWORKER'S GAP FILLING PVA GLUE IS A POLYVINYL ACETATE EMULSION ADHESIVE THAT CREATES A SUPER STRONG BOND FOR INTERIOR WOODWORK AND WORKS GREAT WITH ALMOST ANY SOFT WOOD AND HARDWOOD:
HIGH SOLIDS' CONTENT ENSURES SUPERIOR GAP FILLING, MANY TIMES ELIMINATING THE NEED FOR WOOD FILLER. NATURAL WOOD TONE COLOR HELPS GLUE JOINTS BLEND IN. NON-STAINING FORMULA HELPS PREVENT GLUE SPOTS ON YOUR WOOD, WHICH CAN CAUSE PROBLEMS WHEN APPLYING COLORED STAINS OR DYES. 10-20 MINUTE OPEN TIME; 30-90 MINUTE CLAMP TIME. NON-TOXIC AND NON-FLAMMABLE. WARM WATER CLEAN UP WHEN GLUE IS WET. CANADA."
|
|
|
|
Adhesives - Water Based
|
TITEBOND® COLD PRESS FOR VENEER
|
| Titebond Cold Press Veneer Glue Qt
...plus other(s)
|
TITEBOND® COLD PRESS FOR VENEER HAS BEEN SPECIFICALLY FORMULATED FOR LARGE SCALE BONDING OF VENEERS TO FLAT SURFACES. YOU CAN USE IT FOR COLD PRESS LAMINATING OF WOOD TO SOLID WOOD, PARTICLEBOARD, MDF, PLYWOOD OR OTHER POROUS MATERIALS:
MODERATE SET SPEED (15 MINUTE ASSEMBLY TIME AFTER APPLICATION), LEAVES A TRANSLUCENT GLUE LINE AND PRODUCES NO HARMFUL OR CORROSIVE FUMES. PREVENTS BLEED THROUGH ON OPEN GRAIN AND UNBACKED WOOD VENEERS. CLEANS UP WITH WATER WHEN GLUE IS WET. FOR CONSISTENT COVERAGE A MECHANICAL SPREADER IS RECOMMENDED. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® II FLUORESCENT WOOD GLUE SAVES YOU VALUABLE FINISHING TIME AND MATERIALS
|
| Titebond Flourescent Wood Glue
...plus other(s)
|
|
|
|
Adhesives - Water Based
|
TITEBOND® WHITE GLUE
|
| Titebond All Purpose White Glue Gal
...plus other(s)
|
IDEAL FOR GENERAL WOODWORKING, TITEBOND® WHITE GLUE PRODUCES A TRANSLUCENT GLUE LINE, OFFERS EXCELLENT SANDABILITY AND IS UNAFFECTED BY FINISHES - 5 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
STRONG INITIAL TACK AND FAST SET SPEED SHORTEN CLAMP TIME. BONDS MOST POROUS AND SEMI-POROUS MATERIALS. CLEAN UP WITH WATER; SCRAPE OFF DRIED EXCESS. AVAILABLE IN GALLON AND 5 GALLON CONTAINERS. USA
|
|
|
|
Adhesives - Water Based
|
SUPER TITEBOND® WOOD GLUE
|
| Super Titebond Wood Glue
|
AN EXCELLENT CHOICE FOR EDGE AND FACE GLUING, PROFESSIONAL GRADE SUPER TITEBOND® WOOD GLUE OFFERS SUPERIOR SANDABILITY AND SOLVENT RESISTANCE - 5 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
BONDS STRONGER THAN WOOD AND PROVIDES A LONGER WORKING TIME THAN TRADITIONAL ALIPHATIC RESIN GLUES. CLEAN UP WITH WATER; SCRAPE OFF DRIED EXCESS. 5 GALLON CONTAINERS. USA
|
|
|
|
Adhesives - Water Based
|
TITEBOND® DOWELING GLUE L.V. IS FOR USE WITH AUTOMATIC DOWELING EQUIPMENT
|
| Titebond Doweling Glue
|
ITS LOW VISCOSITY (140 CPS) ALLOWS THE APPROPRIATE FLOW THROUGH THE NARROW FEED LINES AND INJECTORS OF EUROPEAN-MADE DOWELING MACHINERY:
SETS FAST TO REDUCE ASSEMBLY TIME, OFFERS EXCELLENT STRENGTH AND PROVIDES A TRANSLUCENT GLUE LINE. FORMULATED FOR USE ON SOLID WOODS, PARTICLEBOARD, MDF, PLYWOOD AND OTHER POROUS MATERIALS. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® ORIGINAL WOOD GLUE FOR FAST, DEPENDABLE ASSEMBLY AND REPAIR
|
| Titebond Original Wood Glue Qt
...plus other(s)
|
TITEBOND® ORIGINAL WOOD GLUE IS THE INDUSTRY STANDARD FOR WOODWORKING:
STRONG INITIAL TACK AND FAST SET-SPEED REDUCE CLAMP TIME. IDEAL FOR WOOD, HARDBOARD, PARTICLEBOARD, LEATHER AND CLOTH. NON-TOXIC AND EASY TO CLEAN-UP WITH WATER WHILE WET. 3600 PSI BOND STRENGTH AT ROOM TEMPERATURE. STANDS UP TO FINISH. NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. ASSEMBLY TIME: 5 MINUTES. SET TIME: 12 HOURS. USA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
OUR BEST GLUE SCRAPER 521-003. GLUE BRUSHES 875-233.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® II WOOD GLUE RESISTS MOISTURE
|
| Titebond Ii Premium Wood Glue Qt
...plus other(s)
|
TITEBOND® II PREMIUM WOOD GLUE IS IDEAL FOR EXTERIOR TRIM, FURNITURE, BIRDHOUSES, MAILBOXES, PLANTERS AND PICNIC TABLES, PLUS INTERIOR WOODWORK:
SO WATER RESISTANT, IT'S THE ONLY ONE-PART GLUE TO PASS ANSI/HPVA TYPE II WATER-RESISTANCE SPECIFICATIONS (NOT INTENDED FOR CONTINUOUS SUBMERSION). STRONG INITIAL TACK, FAST SET-SPEED, SUPERIOR 3750 PSI BOND STRENGTH AND EXCELLENT SANDABILITY. FDA APPROVED FOR INDIRECT FOOD CONTACT (CUTTING BOARDS) AND IDEAL FOR HOT PRESS AND RADIO FREQUENCY GLUING SYSTEMS. ASSEMBLY TIME: 5 MINUTES. SET TIME: 24 HOURS. USA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
OUR ALL IN ONE GLUE SPREADER KIT 145-217. REUSABLE CHINA BRISTLE BRUSHES 901-182.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® LIQUID HIDE GLUE
|
| Titebond Liquid Hide Glue
...plus other(s)
|
|
SLOW SET SPEED PERMITS PRECISE ASSEMBLY OF PARTS. GREAT FOR CREATING CRACKLE FINISHES AND FINE FURNITURE REPAIR. TITEBOND® LIQUID HIDE GLUE IS ALSO THE RECOMMENDED GLUE FOR CANING PROJECTS.
|
|
|
|
Adhesives - Water Based
|
J.E. MOSER'S OL'YELLER WOOD GLUE
|
| Ol'yeller Wood Glue Gal
...plus other(s)
|
OL' YELLER™ REGULAR COMPARES FAVORABLY WITH OTHER YELLOW GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. TYPICAL BONDING APPLICATIONS INCLUDE CABINETS, FURNITURE, INTERIOR DOORS, TRIM, PLYWOOD, EDGE BONDING, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR BONDING HIGH PRESSURE LAMINATE (HPL) TO WOOD OR WOOD-BASED SUBSTRATES. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA."
|
|
|
|
Adhesives - Water Based
|
J.E. MOSER'S OL'YELLER WATERDOG WOOD GLUE
|
| Ol'yeller Waterdog Wood Glue Gal
...plus other(s)
|
OL' YELLER™ WATER DOG IS AN INDUSTRIAL, WATER RESISTANT TYPE II PVA GLUE THAT STANDS UP TO THE BEST GLUES ON THE MARKET IN SHEAR (BOND STRENGTH PSI) AND WOOD FAILURE RATE TESTS BUT COSTS LESS:
INDUSTRIAL GRADE CROSSLINKING ALIPHATIC ADHESIVE FROM WOODWORKER'S SUPPLY® COMBINES THE CONVENIENCE OF A READY-TO-USE GLUE. PROVIDES TYPE II WATER RESISTANCE AND CREATES A BOND STRONGER THAN MOST WOOD SPECIES. TYPICAL BONDING APPLICATIONS INCLUDE INTERIOR/EXTERIOR DOORS, TRIM, PLYWOOD, EDGE BONDING, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR BONDING HIGH PRESSURE LAMINATE (HPL) TO WOOD OR WOOD-BASED SUBSTRATES. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA."
|
|
|
|
Adhesives - Water Based
|
TITEBOND® WOOD MOLDING GLUE IS SPECIFICALLY FORMULATED FOR TRIM
|
| No Run No Drip Wood Molding Glue
|
TITEBOND® WOOD MOLDING GLUE IS THE THICKEST, FASTEST DRYING GLUE AVAILABLE FOR POROUS AND SEMI-POROUS MATERIALS. IDEAL FOR FOR FINISH TRIM, CROWN MOLDING, BASEBOARDS, WINDOW CASINGS AND SIMILAR APPLICATIONS:
EXTRA THICK FORMULA HELPS FILL SMALL CRACKS AND GAPS. STRONG INITIAL TACK AND FAST SET SPEED (3-5 MINUTE ASSEMBLY TIME AFTER APPLICATION), YET ALLOWS REALIGNMENT OF WORKING PIECES; BOND STRONGER THAN THE WOOD ITSELF. EXCELLENT SANDABILITY; UNAFFECTED BY FINISHES. CLEANS UP WITH WATER. NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. USA
|
|
|
|
Adhesives - Water Based
|
TITEBOND® MELAMINE GLUE BONDS WOOD AND SHEET GOODS DIRECTLY TO MELAMINE
|
| Titebond Melamine Glue
...plus other(s)
|
TITEBOND® MELAMINE GLUE HAS BEEN FORMULATED FOR BONDING WOOD, PARTICLEBOARD, MDF AND OTHER POROUS SUBSTRATES TO SYNTHETIC MATERIALS SUCH AS MELAMINE, VINYL AND HPL AS WELL AS METALS:
WATER BASED, NONFLAMMABLE, LOW ODOR AND DRIES CLEAR. THICKER FORMULATION OFFERS FEWER RUNS AND DRIPS, MAKING IT EASIER TO USE AND MORE EFFECTIVE FOR PRECISE ASSEMBLIES. FAST INITIAL TACK, YET A LONGER OPEN TIME ALLOWS FOR ACCURATE ALIGNMENT OF WORKING MATERIALS (10-15 MINUTE ASSEMBLY TIME AFTER APPLICATION; 12 HOUR SET TIME). CLEANS UP WITH WATER. NOTE: NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. USA.
|
|
|
|
Adhesives - Water Based
|
J.E. MOSER'S OL'YELLER QUICK SET WOOD GLUE
|
| Ol'yeller Quick Set Wood Glue
...plus other(s)
|
OL' YELLER™ QUICK SET INDUSTRIAL GRADE ALIPHATIC PVA ADHESIVE CREATES A FAST SETTING GLUE TTHAT BONDS FASTER THAN MOST OTHERS AND CURES STRONGER THAN MOST WOOD SPECIES. OL' YELLER™ QUICK SET COMPARES FAVORABLY WITH SIMILAR GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. CLAMP TIME CAN BE AS SHORT AS 15 MINUTES BUT VARIES DUE TO HUMIDITY AND TEMPERATURE (A TEST PANEL IS SUGGESTED FOR CLAMP TIMES OF LESS THAN ONE HOUR). TYPICAL BONDING APPLICATIONS INCLUDE CABINETS, FURNITURE, INTERIOR DOORS, TRIM, PLYWOOD, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR EDGEBONDING AND MITER-FOLD (V-GROOVE) JOINTS. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA."
|
|
|
|
Adhesives - Water Based
|
TITEBOND® GREENCHOICE™ NON-FLAMMABLE CONTACT CEMENT
|
| Titebond Neoprene Plus Clear Quart
...plus other(s)
|
ENVIRONMENTALLY SUPERIOR TITEBOND® GREENCHOICE™ NEOPRENE PLUS CONTACT CEMENT IS A FAST-GRAB, NONFLAMMABLE ADHESIVE THAT SPREADS EASILY OVER LARGE SURFACES. THIS POST-FORMING, HEAT RESISTANT ADHESIVE SPECIALIZES IN BONDING DECORATIVE LAMINATE, VENEER, LEATHER AND RUBBER SHEETING TO PLYWOOD, PARTICLEBOARD AND OTHER WOOD BASED COMPOSITES. ITS FAST SET AND PROFESSIONAL STRENGTH ALLOWS FOR IMMEDIATE TRIMMING, CUT FILLING OR MACHINING AFTER APPLICATION. NEOPRENE PLUS CONTACT CEMENT IS VOC-COMPLIANT AND MEETS GREENSEAL GS-36 PRODUCT SPECIFICATION, MAKING IT NON-TOXIC AND NON-HARMFUL TO THE ENVIRONMENT. IT CONTRIBUTES TO HABITAT AND RESOURCE CONSERVATION AND DOES NOT CONTAIN HARMFUL CARCINOGENS OR EMIT DANGEROUS FUMES INTO THE ATMOSPHERE. THIS PRODUCT DOES NOT GIVE OFF A STRONG OFFENSIVE ODOR:
APPLY, LET DRY 30-45 MINUTES AND BOND. BONDED ASSEMBLIES CAN BE MACHINED IMMEDIATELY. CLEANS UP WITH WATER. APPLY WITH A BRUSH, GLUE ROLLER OR BY SPRAY, COVERS APPROX. 533 SQ FT PER GALLON. AVAILABLE IN QUART AND GALLON CANS. USA
|
|
|
|
Adhesives - Water Based
|
J.E. MOSER'S OL'YELLER NON-SAG WOOD GLUE
|
| Ol'yeller Non-sag Wood Glue
|
OL' YELLER™ NON SAG GLUE INDUSTRIAL GRADE ALIPHATIC PVA WOODWORKING ADHESIVE DOES NOT DRIP LIKE STANDARD YELLOW GLUE AND CREATES A BOND STRONGER THAN MOST WOOD SPECIES. OL' YELLER™ NON SAG GLUE COMPARES FAVORABLY WITH SIMILAR GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA WOODWORKING ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. ESPECIALLY RECOMMENDED FOR VERTICAL GLUING APPLICATIONS. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA."
|
|
|
|
Adhesives - Water Based
|
TITEBOND® EXTEND WOOD GLUE GIVES YOU MORE WORKING TIME
|
| Titebond Extend Wood Glue
...plus other(s)
|
TITEBOND® EXTEND WOOD GLUE IS A SLOWER-SETTING VERSION OF THE COMPANY'S ORIGINAL WOOD GLUE. OFFERS SUPERIOR PERFORMANCE IN A BROAD RANGE OF APPLICATIONS, INCLUDING EDGE AND FACE GLUING - PARTICULARLY USEFUL IN COMPLEX OPERATIONS SUCH AS CURVED RAILINGS AND OTHER ASSEMBLIES THAT REQUIRE MORE TIME TO ALIGN:
3510 PSI BOND STRENGTH. OPEN ASSEMBLY TIME: 15 MINUTES. SET TIME: 24 HOURS. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® II EXTEND WOOD GLUE IS EXTERIOR GRADE WITH LONGER OPEN TIME
|
| Titebond Ii Extend Wood Glue
...plus other(s)
|
TITEBOND® II EXTEND WOOD GLUE IS A SLOWER SETTING VERSION OF TITEBOND II® AND IS IDEAL FOR EXTERIOR WOODWORKING PROJECTS, INCLUDING TRIM WORK, AND FURNITURE:
SUPERIOR PERFORMANCE IN A BROAD RANGE OF APPLICATIONS INCLUDING EDGE AND FACE GLUING - PARTICULARLY USEFUL IN COMPLEX OPERATIONS THAT REQUIRE MORE TIME TO ALIGN. PASSES ANSI TYPE II WATER RESISTANCE TESTING. GREAT FOR INDOOR AND OUTDOOR USES(NOT FOR SUBMERSIBLE APPLICATIONS). 3844 PSI BOND STRENGTH AT ROOM TEMPERATURE. OPEN ASSEMBLY TIME: 15 MINUTES. SET TIME: 24 HOURS. USA.
|
|
|
|
Project Supplies - Canes & Clubs
|
TRADITIONAL HARNESS TIPS MAKE GREAT WALKING STICK HANDLES
|
| Pear Shaped Ball Tip Solid Brass
...plus other(s)
|
A TRADITIONAL HARNESS TIP WITH A BRASS, CHROME OR STAINLESS STEEL FINISH WILL ADD A DISTINCTIVE TOUCH TO YOUR FAVORITE, HANDMADE WALKING STICK:
PEAR SHAPED TIPS HAVE 11/16" I.D. HOLES, WEIGH ABOUT 4 OZ., AND ARE 2-1/8" DIA. ROUND BALLS WEIGH 7-1/2 OZ. WITH A 3/4" I.D. HOLE. HAME TIPS ARE 7"L; MINTO HAME TIPS HAVE 1-5/8" ROUND BALL; FAVORITE HAME TIPS END WITH 2-1/8" OVALS. BOTH HAVE 1-1/8" I.D. HOLES X 1-5/16" SHANKS.
|
|
|
|
Project Supplies - Clock Components
|
MASSIVE BRASS PORTAL STYLE NAUTICAL CLOCKS AND WEATHER INSTRUMENTS - SIGNAL FLAG DIAL
|
| Nautical Signal Flag Dial Clock
...plus other(s)
|
HIGH-QUALITY CLOCKS AND WEATHER INSTRUMENTS, DESIGNED FOR DAY-IN, DAY-OUT USE ON A BOATS BULKHEAD, OFFER A LEVEL OF CRAFTSMANSHIP AND ACCURACY THAT MAKE YOUR FINAL PROJECT SECOND TO NONE. EACH FEATURES A HAND-POLISHED SOLID BRASS CASE FINISHED WITH A DOUBLE PLATING OF ZIRCONIUM AND CHROMIUM FOR COMPLETE WEATHER- AND TARNISH-RESISTANCE. ALL HAVE PORTHOLE STYLE COVERS WITH BEVELED GLASS LENSES SET INTO HINGED BEZELS WITH BRASS KNOBS TO PROVIDE ACCESS TO THE MOVEMENTS.
152-780 FEATURES NAUTICAL SIGNAL FLAGS DESIGNATING THE HOURS ON THE FACE OF A BATTERY OPERATED QUARTZ CLOCK. 152-783 IS A BATTERY OPERATED QUARTZ CLOCK WITH ARABIC NUMERALS SHOWING THE TIME. 152-786 FEATURES A HIGHLY ACCURATE BAROMETER WITH A TEMPERATURE-COMPENSATED, ANEROID MOVEMENT WITH INCH AND MILLIBAR READOUTS AND A THERMOMETER WITH FAHRENHEIT AND CELSIUS SCALES. 152-789 FEATURES A THERMOMETER WITH FAHRENHEIT AND CELSIUS SCALES AND A HYGROMETER WHICH DISPLAYS RELATIVE HUMIDITY AS A PERCENTAGE. EACH INSTRUMENT MEASURES 7" DIAMETER WITH A 5" DIAMETER FACE AND 3-3/4" OVERALL HEIGHT. SURFACE-MOUNT DESIGN FOR USE ON WALLS OR PLAQUES. BRASS PLATED STAINLESS STEEL MOUNTING SCREWS ARE INCLUDED. ONE AA BATTERY IS INCLUDED WITH EACH CLOCK. IMPORTED."
|
|
|
|
Project Supplies - Clock Components
|
QUARTZ CLOCK MOVEMENTS
|
| Quartz Movement For 1/8"th Face
...plus other(s)
|
EACH QUARTZ CLOCK MOVEMENT USES ONE AA BATTERY (NOT INCLUDED), HAS A 5/16" DIAMETER BRASS SHAFT, HANGER, REAR SET KNOB AND QUARTZ CRYSTAL:
2-1/8" SQUARE X 1/2"D CASE. SHAFT LENGTHS ACCOMMODATE DIFFERENT CLOCK FACE THICKNESSES. HANDS SOLD SEPARATELY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
858-390 - HANDS FOR CLOCK MOVEMENTS.
|
|
|
|
Project Supplies - Clock Components
|
CUSTOMIZE YOUR CLOCK PROJECTS WITH TRADITIONAL OR MODERN HOUR, MINUTE AND SECOND HANDS
|
| Black Serpentine Clock Hand Set
...plus other(s)
|
SELECT A CLOCK STYLE, THEN PICK THE HANDS TO MATCH. AVAILABLE IN BLACK OR BRASS, HOUR AND MINUTE HANDS FOR CLOCK MOVEMENTS COME IN SCHOOL HOUSE, SERPENTINE, TRADITIONAL AND MODERN STYLES:
HOUR HANDS RANGE FROM 2-1/2" TO 3-1/8" LONG. MINUTE HANDS ARE 3-1/8" TO 3-3/4" LONG. SECOND HANDS (AVAILABLE IN BLACK, RED OR GOLD) ARE FROM 2-3/4" TO 3-1/8" LONG.
|
|
|
|
Project Supplies - Clock Components
|
1-7/16" ARABIC CLOCK FITUPS INTENDED FOR SMALLER PROJECTS
|
| 1 7/16" White Arabic Fitup
...plus other(s)
|
SMALL 1-7/16" CLOCK FITUPS HAVE 12-HOUR ARABIC NUMERAL FACES, AVAILABLE IN WHITE OR IVORY:
FIT INTO 1-3/8" HOLES. BATTERY INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
1-7/16" ROMAN CLOCK FITUPS
|
| 1 7/16" Ivory Roman Fitup
...plus other(s)
|
|
1-7/16" ROMAN CLOCK FITUPS FIT 1-3/8" DIAMETER X 1/4" DEEP HOLE. WHITE OR IVORY FACES WITH BRASS OR CHROME BEZELS; SECOND SWEEP HAND. BATTERY INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
7/8" SOLID BRASS MICRO CLOCK FITUPS
|
| 7/8" Micro Mini Brass Fitup
...plus other(s)
|
|
SOLID BRASS MICRO CLOCK FITUP FITS INTO 25/32" DIAMETER X 9/32" DEEP HOLE. WHITE FACE; ARABIC OR ROMAN NUMERALS; SECOND SWEEP HAND. BATTERY INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
2" PREMIUM CLOCK INSERTS FOR YOUR PROJECTS
|
| 2"premium/white Roman Dial
...plus other(s)
|
|
|
|
Project Supplies - Clock Components
|
SECOND HANDS FOR CLOCK MOVEMENTS
|
| 1 1/8" Black Sweep
...plus other(s)
|
|
AVAILABLE IN BLACK, RED AND GOLD, SECOND HANDS FOR CLOCK MOVEMENTS ADD AN ADDITIONAL DEGREE OF ACCURACY TO CLOCK PROJECTS. 1-1/8" TO 3-1/2" LENGTHS ADAPT TO ALMOST ANY TIMEPIECE.
|
|
|
|
Project Supplies - Clock Components
|
3-1/2" CLOCK FITUPS
|
| White Arabic Quartz Fitup 3-1/2"
...plus other(s)
|
|
SIX STYLISH WHITE, GOLD, CHROME OR BLACK CLOCK FACES WITH ROMAN OR ARABIC NUMERALS. ALL INCLUDE SWEEP SECOND HAND. FIT INTO A 3" DIA. HOLE, 11/16" DEEP. USE AA BATTERY, NOT INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
QUARTZ CLOCK MOVEMENTS WITH OR WITHOUT PENDULUMS
|
| Westminster Quartz Movmt
...plus other(s)
|
THESE QUARTZ CLOCK MOVEMENTS WILL PROVIDE YEARS OF ACCURATE SERVICE IN JUST ABOUT ANY TIMEPIECE PROJECT (HANDS NOT INCLUDED):
937-565 - COMPACT QUARTZ MOVEMENT, WITH NO PEDULUM, CHIMES EVERY 15 MINUTES PLAYING PART OF THE WESTMINSTER MELODY; COMPLETE TUNE AND HOUR COUNT ON THE HOUR: 7/16" DIAMETER SHAFT; FITS DIALS UP TO 3/8" THICK. OPERATES ON ONE C CELL BATTERY (NOT INCLUDED).
937-586 - STANDARD QUARTZ PENDULUM MODEL FEATURES BREAKAWAY PENDULUM ROD TO SUIT VARIOUS LENGTHS UP TO 16", IN 1" INCREMENTS: 7/16" DIAMETER SHAFT; FITS DIALS UP TO 3/8" THICK. OPERATES ON ONE C CELL BATTERY (NOT INCLUDED).
TO HELP COMPLETER YOUR PROJECT, MAY WE SUGGEST
858-390 - HANDS FOR CLOCK MOVEMENTS.
|
|
|
|
Project Supplies - Clock Components
|
QUARTZ ALARM CLOCK FITUPS
|
| 1 7/8" Mini Alarm
...plus other(s)
|
ALL QUARTZ ALARM CLOCK FITUPS FEATURE SECOND SWEEP HANDS AND SNOOZE BUTTONS FOR FIVE MINUTES' EXTRA SLEEP. FOR ACCESS TO REAR MOUNTED CONTROLS, BACK OF CLOCK DESIGN MUST BE LEFT OPEN:
937-572 - MINI ALARM HAS 1-7/8" ARABIC NUMERAL FACE; PRESS FITS INTO 1-3/4" MOUNTING HOLE (INCLUDES LR44 BUTTON TYPE BATTERY). 936-323 - ROMAN NUMERAL FACE, 2-11/32" DIA. ALARM PRESS FITS INTO 2-3/8" MOUNTING HOLE OR RING MOUNTS (RING AND SCREWS INCLUDED) INTO 2-3/4" HOLE. REQUIRES AA BATTERY (NOT INCLUDED). 936-323 - 3" DIA. ALARM, WITH ARABIC NUMERAL FACE, PRESS FITS INTO 3-1/16" MOUNTING HOLE OR RING MOUNTS (RING AND SCREWS INCLUDED) INTO 3-9/16" HOLE. REQUIRES AA BATTERY (NOT INCLUDED).
|
|
|
|
Project Supplies - Clock Components
|
3-1/4" OVAL CLOCK FITUPS
|
| Oval Fitup White Arabic Dial
...plus other(s)
|
THESE ATTRACTIVE OVAL CLOCK FITUPS HAVE FACES THAT PROVIDE INTERESTING DETAIL, HOWEVER, THEY DO FIT INTO A 3/4" DEEP, ROUND HOLE (2-3/8" DIA.):
WHITE FACE WITH ARABIC OR ROMAN NUMERALS; BLACK HOUR, MINUTE AND SECOND HANDS (BATTERY NOT INCLUDED).
|
|
|
|
Project Supplies - Clock Components
|
CLASSIC AND SCHOOLHOUSE CLOCK DIAL FACES
|
| Schoolhouse Dial
...plus other(s)
|
THESE CLASSIC AND SCHOOLHOUSE DIAL FACES WILL ADD A TOUCH OF AUTHENTICITY TO YOUR CLOCK PROJECTS:
937-894 - SCHOOLHOUSE FACE IS 10" X 10" WITH AN 8-1/2" TIME RING. 937-901 - CLASSIC FACE IS 10" X 10" WITH AN 8" TIME RING. BOTH ARE HEAVY PAPER STOCK. CLOCK SHOWN WITH SCHOOLHOUSE FACE.
|
|
|
|
Project Supplies - Clock Components
|
CLOCK HARDWARE ACCENTS YOUR CLOCK CASES
|
| Eli Clock Finial
...plus other(s)
|
ELEGANT DETAILS SHOW THE EXTRA EFFORT THAT WENT INTO ANY PROJECT, ESPECIALLY A CLOCK. TAKING THE TIME TO ADD CLOCK HARDWARE ACCENTS ADDS WARMTH, CHARM AND VALUE:
CLOCK FINIALS ARE AUTHENTIC COPIES OF PERIOD ORIGINALS. BRASS BALLS AND URNS ARE SPUN, JUST AS THE OLD ONES WERE. TO COMPLETE YOUR CLOCK PROJECT, CONSIDER SPECIALTY HINGES AND KEYHOLE ESCUTCHEONS. BRIGHT POLISHED BRASS.
941-301 - CLOCK HINGES (11/16" X 1-5/8"). 941-308 - CLOCK KNOB WITH BACKPLATE (1/2" X 1-1/2"). 941-315 - KEYHOLE ESCUTCHEON TO MATCH 941-308 (1/2" X 1-1/2"). 941-322 - ELI TERRY CLOCK FINIAL (1-1/2" X 3-1/2" TALL). 941-329 - CLOCK FINIAL (1-3/8" BALL X 3-5/8" TALL). 941-336 - CLOCK FINIAL (1-3/8" BALL X 3-1/2" TALL). 941-246 - MINIATURE FINIAL (5/8" BALL X 15/16" TALL).
|
|
|
|
Project Supplies - Clock Components
|
YOUR PROJECTS WILL SHINE WITH BRASS PLATED, DECORATIVE METAL CASTINGS
|
| Clock Handle
...plus other(s)
|
|
|
|
Project Supplies - Clock Components
|
CLASSIC AND DECO STYLE CLOCK FITUPS FEATURE A VARIETY OF FACES
|
| 60mm Oval White Arabic
...plus other(s)
|
|
|
|
Project Supplies - Engraving
|
PERMANENTLY MARK YOUR PROPERTY USING AN ENGRAVING TOOL
|
| Engraving Tool
|
THE TUNGSTEN CARBIDE TIP ON THIS ELECTRIC ENGRAVER RECIPROCATES AT 7,200 STROKES PER MINUTE TO ALLOW YOU TO PERMANENTLY MARK YOUR PROPERTY WITH YOUR NAME, DRIVER'S LICENSE NUMBER OR SIMILAR IDENTIFIER (SOCIAL SECURITY NUMBER NOT RECOMMENDED):
120V MOTOR - 6' POWER CORD. ADJUSTABLE COLLET CONTROLS TIP VIBRATION ALLOWING FINE ENGRAVING OR LARGE MARKINGS. 5-1/2" LONG MOLDED PLASTIC BODY FITS HAND COMFORTABLY, MAKING TOOL AS EASY TO USE AS A PENCIL. 1 LB. SHIPPING WEIGHT. 90-DAY MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Project Supplies - Inlay Kits
|
LIQUID INLAY ADDS DISTINCTIVE COLOR AND TEXTURE TO ALMOST ANY WOOD PROJECT
|
| Turquoise Inlace Kit - 8oz.
...plus other(s)
|
INLACE™ INLAY MATERIAL IS A POLYESTER RESIN FAVORED BY MANY WOODTURNERS, STRINGED INSTRUMENT CRAFTSMEN, CUE MAKERS AND GOURD ARTISTS:
PRE-MIXED INLACE™ KITS CONTAIN 8 OZ. OF COLORED RESIN AND A 1/2 OZ. BOTTLE OF LIQUID HARDENER. TO USE, MIX ABOUT 25-30 DROPS OF HARDENER WITH 1 OZ. RESIN. FOR ADDITIONAL COLOR AND TEXTURE CONTROL, THE CLEAR INLACE™ KIT HAS 16 OZ. OF CLEAR RESIN PLUS A 1 OZ. BOTTLE OF HARDENER. 12-15 MINUTE WORKING TIME; 12 HOUR DRYING TIME. CLEAN UP WITH ACETONE. MEASURING CUPS, STIRRERS AND INSTRUCTIONS INCLUDED. ADD TURQUOISE NUGGETS TO ANY KIT FOR MORE COLOR AND TEXTURE; ANGULAR SHAPED PIECES ARE APPROXIMATELY BB SIZE. METALLIC "GOLD DUST" WILL PRODUCE A GLITTERY EFFECT. USA.
|
|
|
|
Project Supplies - Jewelry Box Hdwr & Access
|
BRASS FEET FROM BRUSSO® ACCENT ALL BOX PROJECTS
|
| Template For Box Feet Hd702
...plus other(s)
|
ADDING BRUSSO® DECORATIVE BRASS BOX FEET IS ONE OF THE MOST ELEGANT WAYS TO SET OFF A NICELY MADE BOX:
JB-426 FEATURE A COMPRESSED SPHERE AND SPACING COLLAR WITH TURNED PROFILE - PRESSURE FIT AND GLUE INTO PLACE. 3/4" DIA.; PROJECTS 9/16" - 1/2" DIA. MOUNTING TENON. HD-702 HAVE A SQUARE BASE WITH RADIUSED INNER CORNER AND AN INSET BLOCK FOOT. USUALLY MORTISED INTO BOTTOM OF BOX (OPTIONAL TJ-702 TEMPLATE RECOMMENDED) AND FASTENED WITH TWO SCREWS. 7/8" X 7/8"; PROJECTS 1/4". JB-423 ARE SPHERES WITH DISK SHAPED FEET - PRESSURE FIT AND GLUE INTO PLACE. 1/2" DIA.; PROJECTS 3/8" - 5/16" DIA. MOUNTING DOWEL. BOX FEET SOLD IN SETS OF FOUR. USA.
|
|
|
|
Project Supplies - Jewelry Box Hdwr & Access
|
DUNCAN PHYFE DINING TABLE PLANS
|
| Stamped Brass Claw Ft 1"
...plus other(s)
|
COMPLETE, DETAILED PLANS TO BUILD A CLASSIC DUNCAN PHYFE DINING TABLE (LUMBER NOT INCLUDED):
FINISHED TABLE IS 20-1/2"H X 42"W X 96"L, FULLY EXTENDED. FOLDS TO 30". PLANS PROVIDE FOR THREE ADDITIONAL LEAVES. BUILDING PEDESTAL SUPPORTS AND LEGS REQUIRES ADVANCED WOODWORKING SKILLS. CAST, STAMPED OR PLAIN BRASS TOE CAPS ALLOW YOU TO CUSTOMIZE THE DESIGN.
|
|
|
|
Project Supplies - Luggage Hardware
|
NEW LIFE FOR OLD LUGGAGE
|
| Repl Handle Brown Footman Loop
...plus other(s)
|
|
HIGH QUALITY LEATHER REPLACEMENTS FOR DAMAGED, WORN OR MISSING TRUNK OR LUGGAGE HANDLES. FOUR MOUNTING STYLES AFFORD EASY REPLACEMENT OR USE ON NEW PROJECTS. FOOTMAN LOOPS AND D-END HANDLES FASTEN WITH SCREWS OR RIVETS (NOT INCLUDED). SNAP-ON AND BUCKLE-ON STYLES ATTACH TO EXISTING LOOPS OR RINGS FOR SIMPLE AND QUICK REPAIRS. ALL 5-1/2"L. BLACK OR BROWN. USA.
|
|
|
|
Project Supplies - Magnets
|
SUPER MAGNETIC STRENGTH IN A SMALL PACKAGE
|
| Rare Earth Magnets 1/4" X 1/8"
...plus other(s)
|
WHEN MAXIMUM GRIP IS REQUIRED IN A VERY SMALL SPACE, RARE EARTH SUPER MAGNETS SOLVE THE NEED:
MAGNETS ARE MADE FROM NEODYMIUM, THE STRONGEST MAGNET MATERIAL COMMERCIALLY AVAILABLE. USE FOR TOOL RACKS, JIGS, MEMO HOLDERS AND EVEN CABINET DOOR CATCHES - EASILY FASTENED IN PLACE WITH EPOXY. ALL SIZES ARE NICKEL PLATED AND HAVE SLIGHTLY ROUNDED EDGES. SOLD IN BAGS OF 10. NOTE: DUE TO POWERFUL MAGNETIC FORCE FIELDS, EXTREME CAUTION SHOULD BE USED WHEN IN THE VICINITY OF PERSONS USING HEART PACEMAKERS. TO AVOID DATA DAMAGE OR LOSS, KEEP MAGNETS AWAY FROM ELECTRONIC MEDIA.
|
|
|
|
Project Supplies - Mills & Mechanisms
|
SMALL COFFEE MILL HARDEWARE & PLAN
|
| Coffee Mill Hardware And Plan
...plus other(s)
|
|
|
|
Project Supplies - Mills & Mechanisms
|
PEPPER GRINDER HARDWARE AND PLANS
|
| Pepper Grinder & Plan
...plus other(s)
|
PEPPER GRINDER AND PLAN COMES WITH PEPPER GRINDER MECHANISM AND FULL SIZE DRAWINGS OF THE BASE SHOWN:
MECHANISM MEASURES 4-1/4"H X 2-5/8"W; CONSTRUCTION REQUIRES A 3" X 3" X 5-1/2" TURNING BLANK AND WOOD LATHE. COFFEE MILLS AND PLAN INCLUDE A COFFEE MILL MECHANISM AND PLANS TO BUILD THE BASES SHOWN.
LIMITED TO QUANTITIES ON HAND LARGE COFFEE MILL IS APPROXIMATELY 8-1/4" TALL WITH BASE; 4-3/4" SQUARE BASE IS 3-1/2" TALL. SMALL COFFEE MILL IS APPROXIMATELY 7-1/2" TALL WITH BASE; 3-3/4" SQUARE BASE IS 3-1/2" TALL. IMPORTED.
LIMITED TO QUANTITIES ON HAND"
|
|
|
|
Project Supplies - Music Box Movements
|
18 NOTE WINDUP MUSIC BOX MOVEMENTS PLAY FOR UP TO THREE FULL MINUTES
|
| Amazing Grace
...plus other(s)
|
ENGINEERED TO PROVIDE CLEAR, RESONANT SOUND, 18 NOTE ECONOMICAL MUSIC BOX MOVEMENTS ARE AVAILABLE WITH A WIDE SELECTION OF THE MOST POPULAR CLASSIC AND CLASSICAL MELODIES. MELODIES ARE TIMED TO PLAY AS COMPLETE AS POSSIBLE CAUSING SOME MELODIES TO HAVE A FASTER TEMPO THAN ORIGINALLY COMPOSED:
1-1/16"H X 1-7/8"W X 2-1/8"L WITH REMOVABLE SHELLS AND DIE CAST MOUNTING BASES. 23/32" LONG WINDUP KEY INCLUDED (NO AUTOMATIC SHUT OFF STEM). MIX AND MATCH TO TAKE ADVANTAGE OF QUANTITY PRICING! IMPORTED.
|
|
|
|
Project Supplies - Not Listed Elsewhere
|
WAVY BLADE LETTER OPENERS AVAILABLE IN FLAT OR ROUND TOP STYLES
|
| Amero Wavy Blade Letter Opr Gold
...plus other(s)
|
BOTH CHROME AND 24K GOLD PLATED WAVY BLADE LETTER OPENER BLADES ARE THICK AND HEAVY FOR LONG LIFE PLUS YOU CAN MAKE THE HANDLES ANY LENGTH YOU WANT:
AMEROSTYLE OPENERS REQUIRE A 1B BUSHING AND "O" BIT; ROUNDED TOP EUROSTYLE NEEDS A 3B BUSHING AND "O" BIT.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
LIMITED TO QUANTITES ON HAND
|
|
|
|
Project Supplies - Not Listed Elsewhere
|
PEEL AND STICK GREEN FELT
|
| Psa Green Felt
...plus other(s)
|
IN ADDITION TO LINING SMALL DRAWERS IN JEWELRY BOXES, PRESSURE SENSITIVE ADHESIVE BACKED FELT CAN BE APPLIED TO THE BOTTOMS OF LAMPS, BOXES, CARVINGS OR COASTERS:
12" X 36"; AVAILABLE IN FOUR COLORS. CUT TO FIT. FELT HAS A PEEL AND STICK BACKING."
|
|
|
|
Project Supplies - Not Listed Elsewhere
|
WITH INDIVIDUAL WEATHER INSTRUMENTS YOU CAN BUILD YOUR OWN WEATHER STATION
|
| Hygrometer
...plus other(s)
|
YOU CAN, QUICKLY AND EASILY, SEE WHAT THE TEMPERATURE, HUMIDITY AND/OR BAROMETIC PRESSURE ARE WITH THESE PRECISION, WEATHER INSTRUMENTS:
936-351, 936-358 - HYGROMETER AND BAROMETER FIT-UPS EACH HAVE 2-13/16" DIA. FACES AND FIT INTO 2-3/8" DIA. X 7/8" DEEP HOLES. EACH PROTRUDES 1/2" - USA. 936-365 - COMBINATION HYGROMETER/THERMOMETER HAS 4-1/4" DIA. FACE AND MOUNTS ONTO ALMOST ANY FLAT SURFACE (MOUNTING SCREWS INCLUDED). EXTENDS 1-1/2" - FRANCE. ALL HAVE BRASS COLOR TRIM, WHITE FACES AND BLACK HANDS AND NUMERALS. MOUNTING PLAQUES SHOWN NOT INCLUDED.
|
|
|
|
Project Supplies - Not Listed Elsewhere
|
CLASSIC ROUND PHOTO FRAMES
|
| Gold Photo Frame
...plus other(s)
|
|
PERFECT FOR DISPLAYING OLD OR NEW TREASURES. GOLD OR CHROME FINISH ROUND PHOTO FRAMES FIT INTO A 1-7/8" HOLE WITH A 7/16" DEPTH. HIGH QUALITY GLASS LENS PROTECTS PHOTOS FROM DAMAGE. 936-442 IS LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)
