|
|
|
Machinery - Band Saws
|
MILL YOUR OWN PRECISION DIMENSIONAL LUMBER USING A PERSONAL SAWMILL
|
| 15hp Personal Sawmill
...plus other(s)
|
IF YOURE A WOOD HOBBYIST OR CRAFTSMAN, YOU DONT NEED TO BUY BOARDS FROM THE LUMBERYARD ANYMORE. SURPRISINGLY EASY TO SET UP AND OPERATE, THE WOOD-MIZER® MODEL LT15 PERSONAL SAWMILL CAN HANDLE LOGS UP TO 28" DIA. AND VIRTUALLY ANY LENGTH:
15HP, ELECTRIC START, GASOLINE FUELED ENGINE. 158"L X 1.25"W X 0.042"T BLADE - CUTS 75-125 BD.FT./HR (102-983 BLADES MUST BE ORDERED SEPARATELY). HAND CRANK ADJUSTS CARRIAGE POSITION AND MOVES HEAD UP AND DOWN TO CHANGE BOARD THICKNESS (CUT TO WITHIN 1" OF BED). EXTENSIVE GUARDING ALONG WITH THE COMBINATION CLUTCH/BRAKE FOR OPERATOR SAFETY. INCLUDES TWO, 80" LONG BED SECTIONS WITH INTEGRAL LEVELERS THAT CAN HANDLE LOGS UP TO 11' LONG. 944 LBS. ASSEMBLED - OWNER'S MANUAL CONTAINS ASSEMBLY AND DISASSEMBLY INSTRUCTIONS SO SAWMILL CAN BE LOADED INTO A PICKUP BY TWO PEOPLE. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY. 102-977 - ANY NUMBER OF OPTIONAL BED SECTIONS CAN BE ADDED TO INCREASE CAPACITY - EACH 80" LONG SECTION WEIGHS 160 LBS. 102-980 - OPTIONAL PROPACKAGE INCLUDES INDUSTRIAL QUALITY ANTI-ROLLBACK LOG LOADING RAMPS, CANT HOOK AND LOG TAPER WEDGE. USA.
|
|
|
|
Machinery - Band Saws
|
WOODTEK 18" BAND SAW
|
| 18" Band Saw 2hp 1ph 230v
...plus other(s)
|
WITH TWO SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, WOODTEK® BAND SAWS TRACK STRAIGHT AND RUN COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOTS AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN AND A QUICK RELEASE BLADE LATCH. FOOT BRAKES ARE LARGE AND EASY TO REACH, SO YOU CAN QUICKLY STOP THE BLADE. SAWBLADE, TIRE, MITER GAUGE, RIP FENCE, GUIDE RAIL, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. 4" DIA. DUST COLLECTION PORT AT THE LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WOODTEK® 18" BAND SAW: MOTOR - 2 HP, 230V, 9.6A, 1PH, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 3,000 FPM. BLADE SIZE - 144", 1/4" TO 1" WIDE (17-1/2" DIA. WHEEL). HEIGHT CAPACITY - 10". DEPTH CAPACITY - 17-1/2". TABLE SIZE - 25-5/8" X 18-1/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 72-3/4"H X 31-1/2"W X 28-1/2"D. SHIPPING WEIGHT - 558 LBS.
WOODTEK® 20" BAND SAW: MOTOR - 2 HP, 230V, 12A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,000 FPM. BLADE SIZE - 155", 3/8" TO 1" WIDE (20" DIA. WHEEL). HEIGHT CAPACITY - 12-7/16". DEPTH CAPACITY - 19-3/16". TABLE SIZE - 23" X 20-1/2"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 73-3/4"H X 34"W X 26"D. SHIPPING WEIGHT - 593 LBS.
WOODTEK® 24" BAND SAW: MOTOR - 5 HP, 230V, 25A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,600 FPM. BLADE SIZE - 177", 3/8" TO 1" WIDE (23-1/4" DIA. WHEEL). HEIGHT CAPACITY - 15-1/2". DEPTH CAPACITY - 23-1/4". TABLE SIZE - 29" X 22-3/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 80"H X 36"W X 28"D. SHIPPING WEIGHT - 753 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
WOODTEK 4 SPEED WOOD OR METAL BAND SAW
|
| 15" 4-spd Wood/metal Band Saw
...plus other(s)
|
WOODTEK® 15" OR 18" FOUR SPEED METAL/WOOD CUTTING BANDSAWS WILL EASILY HANDLE FERROUS AND NON-FERROUS METALS AS WELL AS HARD AND SOFT WOODS - CLUTCH LEVER SWITCHES BETWEEN OPERATING MODES:
80 FPM (STEEL AND STEEL ALLOYS), 150 FPM (CAST IRON AND BRONZE), 200 FPM (ALUMINUM, BRASS AND COPPER) OR 2,800 FPM (WOODCUTTING). UPPER AND LOWER GUIDE PINS PROVIDE SAWBLADE SIDE SUPPORT THRUST BEARINGS SUPPORT REAR. SEPARATE BLADE TENSIONING AND BLADE TRACKING CONTROLS. HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOT AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. 14TPI METAL CUTTING AND 6TPI WOOD CUTTING SAWBLADES, TIRES, MITER GAUGE, RIP FENCE WITH KNOB, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
130-367 15" BANDSAW:
MOTOR - 1HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 111", 3/16" TO 3/4" WIDE (15" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 8-3/4". DEPTH CAPACITY - 14-5/8". TABLE SIZE - 15" X 15"; TILTS 5°L AND 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 68"H X 27"W X 22"D. NET WEIGHT - 302 LBS. SHIPPING WEIGHT - 353 LBS.
130-370 18" BANDSAW:
MOTOR - 1-1/2HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 133", 3/16" TO 1" WIDE (18" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-3/4". DEPTH CAPACITY - 17-3/4". TABLE SIZE - 18" X 19"; TILTS 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 75"H X 33"W X 24"D. NET WEIGHT - 344 LBS. SHIPPING WEIGHT - 400 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
WOODTEK 133517 14" BAND SAW 1HP W/FENCE & MITER
|
| 14" Band Saw 1hp W/fence & Miter
...plus other(s)
|
WITH TWO UPPER AND TWO LOWER SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, THE WOODTEK® TWO SPEED 14" BANDSAW TRACKS STRAIGHT AND RUNS COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLE HAS 3/8" X 3/4" MITER SLOT AND OFFERS VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. AIR NOZZLE, SAWBLADE, URETHANE TIRES, MITER GAUGE, EXTRUDED ALUMINUM FENCE SYSTEM, WRENCHES AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1HP, 120V, 1PH, 10A, 1,750 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SPEED - 1,720 OR 2,900 FPM. BLADE SIZE - 93-1/2", 1/4" TO 3/4" WIDE (13-7/8" DIA. WHEELS). HEIGHT CAPACITY - 6". DEPTH CAPACITY - 13-1/2". TABLE SIZE - 16-1/16" X 16-1/2"; TILTS 13°L AND 50°R. DUST PORT - 2-1/4" DIA. OVERALL DIMENSIONS - 67"H X 29-1/2"W X 19-1/8"D. SHIPPING WEIGHT - 194 LBS.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw 1-1/2hp
...plus other(s)
|
"ONE SOLID MACHINE" AND "PURRED LIKE A KITTEN" ARE WORDS WOOD® MAGAZINE EDITORS USED TO DESCRIBE THE POWERMATIC® PWBS-14CS 14" BAND SAW:
1-1/2 HP, 115/230V, 1PH MOTOR - 3,000 SFPM. MICRO ADJUSTABLE, DUAL BEARING BLADE GUIDE SYSTEM ABOVE AND BELOW THE TABLE - 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. TWO PIECE CAST IRON TABLE HAS 5" X 15" TILTING (45° RIGHT, 10° LEFT) SECTION AND FIXED 15" X 5" EXTENSION - CHIP BLOWER ENSURES CLEAN, VISIBLE CUT LINE. TENSIONING GAUGE SETTINGS INDICATED IN "BLADE WIDTH" INCREMENTS CARTER QUICK RELEASE™ LEVER SPEEDS BLADE CHANGES. BALANCED, NINE SPOKE CAST IRON WHEELS RUN SMOOTHLY - POLY V-BELT MAXIMIZES POWER TRANSMISSION WHILE MINIMIZING NOISE AND VIBRATION. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. MITER GAUGE, 1/4" X 93-1/2" BLADE, 60 WATT HALOGEN WORK LIGHT, TOOL KIT AND INSTRUCTIONS INCLUDED. 68"H X 34"W X 20"L. 203 LBS. NET WEIGHT; 221 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® 20" AND 24" INDUSTRIAL BAND SAWS
|
| 2415 24" 2-spd Band Saw, 3hp 1ph 230v
...plus other(s)
|
TWO-SPEED POWERMATIC® MODEL 2013 20" AND MODEL 2415 24" INDUSTRIAL BAND SAWS CAN BE OPERATED AT 2,000 SFPM OR 4,000 SFPM TO TAKE FULL ADVANTAGE OF THEIR STANDARD AND RESAW CAPACITIES:
2, 3 OR 5 HP MOTOR - 1PH OR 3PH - 230V OR 230/460V WITH MAGNETIC ON/OFF SWITCH. SAWBLADE IS COMPLETELY GUARDED BUT EASILY ACCESSIBLE FOR CHANGING. CAST IRON WHEELS ARE EQUIPPED WITH VULCANIZED RUBBER TIRES - LOWER WHEEL BRUSH HELPS ELIMINATE SAWDUST BUILDUP. EASILY ACCESSIBLE HANDWHEELS AND CONTROLS. CONVENIENT FOOT BRAKE FOR RAPID STOPS. CAST IRON TABLE WITH 3/8" X 3/4" MITER SLOT TILTS 45° RIGHT, 10° LEFT. 4" DIA. DUST COLLECTION PORT (MINIMUM 600 CFM DUST COLLECTION REQUIRED). WORK LIGHT, RIP FENCE, MITER GAUGE, RAILS, WRENCH, HARDWARE AND INSTRUCTIONS INCLUDED.
MODEL 2013 20" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 12-3/8"/20". TABLE: 24" X 24". BLADE LENGTH/WIDTH: 158-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-1/4" TABLE HEIGHT X 34-1/4"W X 24"D. NET WEIGHT: 950 LBS. SHIPPING WEIGHT: 970 LBS.
MODEL 2415 24" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 14-3/8"/24". TABLE: 24" X 28". BLADE LENGTH/WIDTH: 180-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-3/8" TABLE HEIGHT X 39"W X 34-3/8"D. NET WEIGHT: 1,050 LBS. SHIPPING WEIGHT: 1,190 LBS.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 14" BAND SAWS
|
| 14" Band Saw, Closed Stand, 1hp
...plus other(s)
|
WITH ALL OF ITS FEATURES, THE JET® JWBS-14CS (708115K) 14" CLOSED STAND WOODWORKING BAND SAW WILL BE A WELCOME ADDITION TO YOUR SHOP:
1HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. MICRO ADJUSTABLE BLADE GUIDE WITH GRAPHITE IMPREGNATED JET BLOCKS™ FOR SMOOTHER RUNNING. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 15" X 15" CAST IRON TABLE TILTS 45°R AND 10°L. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. SIMILAR JWBS-14MW (708116K) 14" CLOSED STAND METALWORKING BAND SAW FEATURES THREE SPEEDS (735, 1,470, 2,350 SFPM) FOR NON-FERROUS METAL AND WOODWORKING APPLICATIONS. 68"H X 26"W X 19"D. 185 LBS. NET WEIGHT; 200 LBS. SHIPPING WEIGHT. JWBS-14OS (708113A) 14" OPEN STAND WOODWORKING BAND SAW FEATURES: 3/4HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 14" X 14" CAST IRON TABLE TILTS 45°R AND 15°L. 16GA STEEL STAND - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. 68"H X 24"W X 26-1/2"D. 172 LBS. NET WEIGHT; 187 LBS. SHIPPING WEIGHT.
5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
FROM GENERAL CUTTING TO RESAWING, JET® 16", 18" AND 20" WOODWORKING BAND SAWS CAN HANDLE IT ALL
|
| Jwbs-16b 16" Band Saw 1-1/2hp 1ph
...plus other(s)
|
JET® PROFESSIONAL WOODWORKING BAND SAWS FEATURE TRIANGULAR COLUMN AND STEEL STANDS FOR ROCK SOLID STABILITY:
BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. CAST IRON TABLES TILT 45°R AND 10°L. PUSH BUTTON, MECHANICAL ON/OFF SWITCH (JWBS-18X-3 AND JWBS-20 HAVE MAGNETIC SWITCHES).
JWBS-16B 16" BAND SAW 708749B: 1-1/2HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 10" DEPTH RESAW CAPACITY; 16-3/8" WIDE CUTTING CAPACITY. 17" X 17" TABLE. 123" SAWBLADE. 71"H X 22"W X 30-3/4"D. 310 LBS. NET WEIGHT; 345 LBS. SHIPPING WEIGHT.
JWBS-18QT 18" BAND SAW 710750B: 1-3/4HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 410 LBS. NET WEIGHT; 450 LBS. SHIPPING WEIGHT.
JWBS-18QT-3 18" BAND SAW 710751B: 3HP, 1PH, 230V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 460 LBS. SHIPPING WEIGHT.
JWBS-20QT-3 20" BAND SAW 708754B: 3HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
JWBS-20QT-5 20" BAND SAW 708755B: 5HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT AND MITER GAUGE (JWBS-16 EXCLUDED), 4TPI 3/4" WIDE SAWBLADE, 4" DUST PORT, FOOT BRAKE (JWBS-20 ONLY) AND INSTRUCTIONS INCLUDED. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
IT'S TOUGH TO MATCH THE JET® 18" WOODWORKING BANDSAW FOR FEATURES, QUALITY AND PRICE
|
| Jwbs-18qt 18" Band Saw 1-3/4hp 1ph
|
ONE OF THE MOST POPULAR JET® BANDSAWS, THE JWBS-18 18" WOODWORKING BANDSAW HAS EVERYTHING NEEDED TO RUN RIGHT OUT OF THE BOX:
1-1/2HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 10-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 133" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D; 320 LBS. NET WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 20" WOODWORKING BANDSAW IS POWERED BY A 2HP INDUSTRIAL STRENGTH MOTOR
|
| Jwbs-20qt-3 20" Band Saw 3hp 1ph
|
A TRUE CUTTING AND RESAWING WORKHORSE, THE JET® JWBS-20 20" WOODWORKING BANDSAW COMES WITH ALL OF THE FEATURES EXPECTED BY PROFESSIONAL OR SERIOUS AMATEUR WOODWORKERS - EVEN A FOOT BRAKE AS STANDARD EQUIPMENT:
2HP, 230V, 1PH TEFC MOTOR - 3,450 SFPM. PUSH BUTTON, MAGNETIC ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 20" FRAME TO BLADE CLEARANCE. 21" X 21" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 150" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 75"H X 22"W X 30-3/4"D; 500 LBS. NET WEIGHT. LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 18" WOODWORKING BANDSAW WITH ROLLER GUIDES
|
| Jwbs-18qt-3 18" Band Saw 3hp 1ph
|
THE JET® JWBS-18X-3 18" WOODWORKING BANDSAW HAS BIG-MACHINE CAPACITY WITH A FOOTPRINT SLIGHTLY LARGER THAN A 14" MACHINE:
3HP, 230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 137" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 435 LBS. SHIPPING WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
WOODTEK 17" WOOD CUTTING BAND SAW
|
| 17" Band Saw 2hp 1ph 120/230v
|
THE WOODTEK® 17" BANDSAW TRACKS STRAIGHT AND RUNS COOL - A THIRD BEARING IN THE UPPER AND LOWER BLADE GUIDES SUPPORTS THE BACK OF THE SAWBLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
UPPER BLADE GUIDE IS ON A RACK-AND-PINION SYSTEM FOR GREATER ACCURACY. HEAVY CAST IRON TABLE, WITH 3/8" X 3/4" MITER "T" SLOT, OFFERS VIBRATION-FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. DUST PORT AT LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. SAWBLADE, REMOVABLE BLADE INSERT, RUBBER TIRES, LOWER WHEEL WIPER, MITER GAUGE, WRENCHES, HARDWARE AND INSTRUCTIONS INCLUDED. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 2HP, 120/240V, 8A/4A, 1PH, 1,720 RPM - "V" BELT DRIVE. ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SPEED - 1,800 FPM/2,800 FPM. BLADE SIZE - 130-1/2", 1/4" TO 1-3/8" WIDE (14-3/4" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-1/2". THROAT CAPACITY - 17-5/16". TABLE SIZE - 18" X 19"; TILTS 45°R AND 13°L. FENCE - 3-5/8"H X 18"L. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 84"H X 38"W X 30"D. NET WEIGHT - 350 LBS. SHIPPING WEIGHT - 404 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC 1791800 PM1800 18" BAND SAW
|
| Pm1800 18" Band Saw, 5hp 1ph 230v
...plus other(s)
|
|
BALL BEARING BLADE GUIDES WITH MICRO-ADJUSTMENT FOR GREAT BLADE CONTROL SPECIAL GROOVED THRUST BEARING STABILIZES SMALLER BLADES MASSIVE CAST IRON CONSTRUCTION DAMPENS VIBRATION FOR SMOOTH OPERATION DYNAMICALLY BALANCED CAST IRON WHEELS HAVE FLYWHEEL MOMENTUM 2 BLADE SPEEDS TO HANDLE A VARIETY OF WORK, 1,800/4,200 SFPM 24" X 24" CAST IRON TABLE WITH 3/8" X " T-BOTTOM MITER SLOT HEAVY DUTY T-SQUARE STYLE FENCE WITH ADJUSTABLE EXTRUDED ALUMINUM CHEEK INCLUDES PRECISION MITER GAUGE 2" DIAMETER SOLID STEEL RE-SAW POST MULTI-STEP BLADE TENSION RELEASE LEVER IS QUICK AND EASY TO USE 4" DUST PORT CONVENIENTLY LOCATED FOOT BRAKE 5HP MOTOR IN SINGLE OR THREE PHASE, 3-PHASE PRE-WIRED 230V
|
|
|
|
Machinery - Band Saws
|
GENERAL INTERNATIONAL® 14" DELUXE WOOD BAND SAW WITH 12" RESAW CAPACITY
|
| 14" Band Saw W/ 12" Resaw Capacity
|
MODEL #90-170 M1 14" DELUXE WOOD BAND SAW HAS A HEAVY-DUTY ONE-PIECE FRAME DESIGNED FOR ADDED STABILITY. NO FURTHER ASSEMBLY REQUIRED. DYNAMICALLY-BALANCED CAST-IRON WHEELS HAVE REPLACEABLE RUBBER TIRES. SOLID, HIGH QUALITY, PRECISION MACHINED RIBBED CAST-IRON TABLE WITH 10° LEFT AND 45° RIGHT TILTING ACTION FOR BEVEL CUTS.
FEATURES:
DELUXE UPPER AND LOWER BLADE GUIDE BEARINGS INCLUDED. 2 CUTTING SPEEDS FOR EXCELLENT RESULTS IN EITHER HARD OR SOFT WOODS. PRECISION METAL MITER GAUGE AND DUAL MITER SLOTS IN TABLE FOR STABLE PRECISION CROSS CUTS ON EITHER SIDE OF THE BLADE. DELUXE EXCALIBUR BANDSAW RIP FENCE SYSTEM WITH CURVED RESAW GUIDE BLOCK. ONBOARD STORAGE MOUNTS FOR MITER GAUGE AND RIP FENCE. SMOOTH RACK AND PINION UPPER BLADE GUARD ADJUSTMENT. QUICK RELEASE BLADE TENSION LEVER FOR FAST BLADE CHANGES. 2 BUILT-IN 4" DIAMETER DUST CHUTES FOR BETTER DUST COLLECTION. LARGE PADDLE-STYLE STOP SWITCH. LARGE 12" RESAW CAPACITY. 3/4" BLADE INCLUDED.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw & Riser Block
...plus other(s)
|
"ONE SOLID MACHINE" AND "PURRED LIKE A KITTEN" ARE WORDS WOOD® MAGAZINE EDITORS USED TO DESCRIBE THE POWERMATIC® PWBS-14CS 14" BAND SAW:
1-1/2 HP, 115/230V, 1PH MOTOR - 3,000 SFPM. MICRO ADJUSTABLE, DUAL BEARING BLADE GUIDE SYSTEM ABOVE AND BELOW THE TABLE - 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. TWO PIECE CAST IRON TABLE HAS 5" X 15" TILTING (45° RIGHT, 10° LEFT) SECTION AND FIXED 15" X 5" EXTENSION - CHIP BLOWER ENSURES CLEAN, VISIBLE CUT LINE. TENSIONING GAUGE SETTINGS INDICATED IN "BLADE WIDTH" INCREMENTS CARTER QUICK RELEASE™ LEVER SPEEDS BLADE CHANGES. BALANCED, NINE SPOKE CAST IRON WHEELS RUN SMOOTHLY - POLY V-BELT MAXIMIZES POWER TRANSMISSION WHILE MINIMIZING NOISE AND VIBRATION. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. MITER GAUGE, 1/4" X 93-1/2" BLADE, 60 WATT HALOGEN WORK LIGHT, TOOL KIT AND INSTRUCTIONS INCLUDED. 68"H X 34"W X 20"L. 203 LBS. NET WEIGHT; 221 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
BLUM MINIPRESS M53.1053*US BORING MACHINE
|
| Minipress Boring Machine 220v/1ph
...plus other(s)
|
THE BLUM® MINIPRESS P IS AN EASY TO USE MACHINE, DESIGNED FOR BORING ALL HINGE AND MOUNTING PLATE SYSTEMS, METABOX™ FRONT FIXING BRACKETS AND 32MM LINE BORING FOR CABINET SIDES USING OPTIONAL 8-SPINDLE END MOUNTED OR 9-SPINDLE CENTER-MOUNTED LINE BORING HEAD:
135-233 220V, 1PH MOTOR OR 135-239 220V, 3PH AVAILABLE BY SPECIAL ORDER. SPINDLE CONFIGURATION IS ADJUSTED BY A 90° ROTATION OF THE HEAD WITH ONE SETTING DEDICATED TO THEBLUM® HINGE BORING PATTERN. THE NEW MODEL MINIPRESS™ FEATURES AN ADAPTER RING MOUNT TO ACCEPT THE OPTIONAL LINE BORING HEADS. PRESET DEPTH POSITIONS AND ADJUSTABLE FENCE STOPS MAKE SETUPS SIMPLE. THE MACHINE FEATURES A FIVE SPINDLE SWIVELING HEAD, PNEUMATIC MOISTURE TRAP, ADJUSTABLE STROKE AND BORING DEPTH, PNEUMATIC HOLD DOWN CLAMPS, SWING ARM FOR INSERTION RAM, DUST EVACUATION JET AND DUST COLLECTION ADAPTER. WORK TABLE, CENTER RULER, FOUR RULER STOPS, TWO FIXED BORING DEPTH STOPS, REPLACEMENT BREAKAWAY CLUTCH AND TOOL KIT INCLUDED. OPTIONAL INSERTION RAMS ARE AVAILABLE FOR MOST COMPONENTS. 158-543 OPTIONAL 8-SPINDLE LINE BORING HEAD IS END MOUNTED AND DRILLS EIGHT HOLES SPACED 32MM APART PERPENDICULAR TO THE FENCE. 158-540 OPTIONAL 9-SPINDLE LINE BORING HEAD IS CENTER MOUNTED AND DRILLS 9 HOLES, 32MM APART PARALLEL TO THE FENCE. 158-546 SPINDLE HEAD RETROFIT SET IS AVAILABLE TO CONVERT MINIPRESS™ MACHINES PRODUCED IN 2009 OR BEFORE TO ACCOMMODATE THE NEW BORING HEADS. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
|
|
|
|
Machinery - Boring
|
POWERMATIC® CBM21 LINE BORING MACHINE PROVIDES BOTTOM TO TOP DRILLING
|
| Cbm21 Cabinet Line Boring Machine
...plus other(s)
|
THE POWERMATIC® CBM21 21 SPINDLE LINE BORING MACHINE FEATURES A FULLY ADJUSTABLE BORING HEAD WITH DIGITAL READOUT THAT CAN DRILL VERTICALLY OR HORIZONTALLY AND LOCK AT ANY ANGLE IN BETWEEN:
2-1/2HP, 230V, 1PH MOTOR STARTS ONLY WHEN PNEUMATIC FEED CYCLE IS ACTIVATED BY THE FOOT PEDAL (90 PSI AIR SUPPLY REQUIRED). SIX POSITION TURRET STOP MAKES DRILLING DEPTH ADJUSTMENTS SIMPLE. CLAMP BAR WITH "GRIP TITE" SURFACE ENSURES PNEUMATIC WORK HOLD DOWNS STAY IN POSITION. 0-3-1/8" DRILLING DEPTH STROKE - 32MM BETWEEN CENTERS. 6" DEEP THROAT. 3,450 RPM SPINDLE SPEED. REQUIRES 11 RIGHT- AND 10 LEFT-HAND BORING BITS (NOT INCLUDED). 17-1/4" X 35" TABLE. 60" ADJUSTABLE BACKFENCE WITH FOUR FLIP STOPS LOCATES MATERIAL WITH PRECISION. COMES WITH TWENTY-ONE 10MM QUICK CHUCKS, TWO ADJUSTABLE FENCES FOR SMALL AND LARGE PANELS, FOOT PEDAL, TOOL KIT AND INSTRUCTIONS. 48"H X 31"W X 49"L. 682 LBS. NET WEIGHT; 841 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
POWERMATIC® LBM21 LINE BORING MACHINE
|
| Lbm21 Line Boring Machine
...plus other(s)
|
THE POWERMATIC® MODEL LBM21 21 SPINDLE LINE BORING MACHINE IS A SINGLE ROW LINE DRILL IDEAL FOR DRILLING SHELF SUPPORT HOLES, DRAWER SLIDE HOLES AND HINGE BASE PLATE HOLES:
2-1/2HP, 230V, 1PH MOTOR STARTS ONLY WHEN PNEUMATIC FEED CYCLE IS ACTIVATED BY THE FOOT PEDAL (90 PSI AIR SUPPLY REQUIRED). 0-2" DRILLING DEPTH STROKE - 32MM BETWEEN CENTERS. 6" DEEP THROAT. 3,450 RPM SPINDLE SPEED. REQUIRES 11 RIGHT- AND 10 LEFT-HAND BORING BITS (NOT INCLUDED). 19" X 47-1/4" TABLE. 60" FENCE WITH FOUR FLIP STOPS LOCATES MATERIAL WITH PRECISION. TWO MANUAL, HEAD-MOUNTED INDEX PINS PROVIDE PRECISE POSITIONING OF LONGER STOCK. COMES WITH TWENTY-ONE 10MM QUICK CHUCKS, FOOT PEDAL, ADJUSTABLE BACKFENCE AND INSTRUCTIONS. 63"H X 24"W X 49"L. 340 LBS. NET WEIGHT; 526 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
COMPACT BORING MACHINE FOR BLUM® HARDWARE
|
| Minipress M Manual/110v
|
FLEXIBLE ENOUGH FOR THE SHOP OR ON-SITE, THE BLUM® MINIPRESS M IS DESIGNED FOR BORING ALL HINGE AND MOUNTING PLATE SYSTEMS, METABOX AND TANDEMBOX FRONT FIXING BRACKETS, METABOX C-15 DRAWER COMPONENTS AND 3 HOLE LINE BORING OF CABINET SIDES:
120V, 1PH MOTOR - PRESSURIZED AIR IS NOT REQUIRED. FIVE SPINDLE SWIVELING HEAD - ONE POSITION DEDICATED TO THE BLUM® 3-HOLE HINGE BORING PATTERN. BORING DEPTH IS SET USING AN ADJUSTMENT WHEEL. EXACT DRILLING DIMENSION SETTING IS FIXED USING A LOCK HANDLE. WORK TABLE, CENTER RULER, FOUR RULER STOPS, TWO FIXED BORING DEPTH STOPS, REPLACEMENT BREAKAWAY CLUTCH AND TOOL KIT INCLUDED. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
|
|
|
|
Machinery - Boring
|
GENERAL INTERNATIONAL® 13 SPINDLE BORING MACHINE
|
| 13" Spindle Boring Machine W/ Stand
...plus other(s)
|
MODEL #75-440 M1 13 SPINDLE BORING MACHINE HAS A FULLY ADJUSTABLE FENCE SYSTEM WITH EASY TO READ SCALES IN BOTH INCHES AND METRIC FOR QUICK SETUP AND ACCURATE BORING. CONSTRUCTED IN HEAVY-DUTY CAST-IRON AND MACHINED WITH PRECISION. INDEXING PINS MAINTAIN CORRECT SPINDLE ALIGNMENT FOR RESUMING LINE BORING OPERATIONS IN LONG WORKPIECES. WORK STOPS ON EITHER END OF FENCE LINE UP WORK FROM THE LEFT OR RIGHT FOR PERFORMING PARALLEL BORING PATTERNS.
POWERFUL 1/2HP MOTOR DELIVERS PLENTY OF POWER AND SPEED FOR MULTIPLE HOLD BORING, EVEN IN THE TOUGHEST LAMINATES. MANUAL OPERATION REQUIRES MINIMAL MAINTENANCE. OPEN BASE STEEL STAND INCLUDED.
DRILLING HEAD CAN BE EASILY REMOVED AND REPLACED WITH OPTIONAL BLUM STYLE HINGE BORING ATTACHMENT WITHOUT THE NEED FOR SPECIAL TOOLS.
FEATURES:
13 SPINDLES 6 LEFT, 7 RIGHT. 32MM SPINDLE CENTERS, 3450 RPM SPINDLE SPEED. TABLE SURFACE IS 31-1/2" X 15-3/4", HEIGHT FROM FLOOR IS 33-3/8". MAXIMUM DEPTH OF BIT TO FENCE IS 4", MAXIMUM DEPTH OF STROKE IS 2-12", AND MAXIMUM STOCK THICKNESS IS 5-1/2". POWERFUL 1-1/2HP, 110V, 1PH, 12.6A MOTOR. ADJUSTABLE DEPTH STOP CONTROL.
|
|
|
|
Machinery - Boring
|
DELTA® 13 SPINDLE LINE BORING MACHINE
|
| 13 Spindle Line Boring Machine
...plus other(s)
|
THE DELTA® 32-325 13 SPINDLE BORING MACHINE PROVIDES A FULL 12" OF WORK SPACE IN FRONT OF THE BORING HEAD TO HANDLE EXTRA-LARGE BOARDS:
3/4HP, 120V, 1,725 RPM, 1PH MOTOR. SEE-THROUGH SPINDLE GUARD FOR SAFETY - 10MM COLLETS, 4" THROAT CAPACITY. ADJUSTABLE DEPTH STOP CONTROLS THE 2" DOWNWARD TRAVEL. TELESCOPING HANDLE EXTENDS FROM 16" TO 23" FOR INCREASED LEVERAGE - RETRACTS WHEN NOT IN USE. FULLY ADJUSTABLE 16" X 29-3/4" TABLE AND FENCE HAVE ENGLISH AND METRIC SCALES FOR QUICK SET-UP AND ACCURATE BORING. INDEXING PINS HELP MAINTAIN CORRECT SPINDLE ALIGNMENT FOR RESUMING LINE BORING OPERATIONS IN LONG WORKPIECES. WORK STOPS ON EITHER END OF THE FENCE ALLOW YOU TO LINE UP WORK FROM THE LEFT OR RIGHT FOR PERFORMING PARALLEL BORING PATTERNS. STEEL SUPPORT STRUCTURE AND BASE - PRE-DRILLED FOR BENCH OR STAND MOUNTING (STAND SOLD SEPARATELY). 32-1/2"H X 30"W X 28-1/2"L. NET WEIGHT 98 LBS.; 125 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. USA. SEVEN RIGHT-HAND (RH) AND SIX LEFT-HAND (LH) 5MM BRADPOINT BORING BITS REQUIRED (SOLD SEPARATELY). OPTIONAL FENCE EXTENSION ADDS 30" TO EXISTING FENCE.
|
|
|
|
Machinery - Boring
|
SET - WOODTEK 3 HOLE BORING MACHINE
|
| Woodtek 3-hole Boring Machine
...plus other(s)
|
WITH A TWO OR THREE HOLE HEAD, A WOODTEK® HORIZONTAL BORING MACHINE HAS SEVERAL FEATURES THAT PUT IT WAY AHEAD OF OTHERS IN TERMS OF PERFORMANCE FOR THE MONEY:
INFINITELY ADJUSTABLE CENTERS PROVIDE MAXIMUM VERSATILITY. CAST IRON TABLE WITH MITER GAUGE T-SLOTS ADJUSTS UP AND DOWN FOR VARYING STOCK THICKNESS. PNEUMATIC CLAMP ACTS SEQUENTIALLY WITH DRILLING HEAD FOR FATIGUE FREE OPERATION - FOOT SWITCH OFFERS HANDS FREE OPERATION. ENCLOSED FENCE MAKES REPETITIVE BORING ACCURATE AND EASY. INCLUDES METAL STAND, FOOT SWITCH, MITER GAUGE, TOOLS, HARDWARE AND COMPLETE INSTRUCTIONS. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS
MOTOR - 2HP, 230V, 12A, 1PH (5-1/2 POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. SPINDLE SPEED - 2,900 RPM. STROKE - 3-1/8. TWO HOLE HEAD ADJUSTMENT - 0.70" TO 2.91" CENTERS. THREE HOLE HEAD ADJUSTMENT - 0.787" TO 3.78" CENTERS. TABLE SIZE - 9-7/8 X 15-3/4. FENCE SIZE - 4-1/4 X 4-3/4. OVERALL DIMENSIONS - 47-1/4"H X 15-3/4"W X 37"D. NET WEIGHT - 264 LBS. SHIPPING WEIGHT - 319 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
4-1/2"L HIGH SPEED STEEL BRADPOINT BITS (RIGHT HAND THREAD; THREADED SHANK) 801-894. 4-1/2"L CARBIDE TIPPED BRADPOINT BITS (RIGHT HAND THREAD; THREADED SHANK) 801-917. WOODTEK® TWO HOLE BORING HEAD ONLY 820-781. WOODTEK® THREE HOLE BORING HEAD ONLY 811-723.
|
|
|
|
Machinery - Boring
|
SAVE UP TO 50% IN FRAME PRODUCTION TIME WITH RITTER MANUFACTURING ASSEMBLY SYSTEMS
|
| R-215 Frame Assembly System W/tub
...plus other(s)
|
|
|
|
Machinery - Drill Presses
|
WOODTEK 10" BENCH TOP DRILL PRESS 5 SPEED
|
| 10" Bench Top Drill Press 5 Speed
|
WITH ITS THREE SPOKE WHEEL, TILTING CAST IRON TABLE (0° TO 45°, LEFT AND RIGHT), LOCKING HEIGHT ADJUSTMENTS AND QUIET "V" BELT DRIVE MOTOR, THE WOODTEK® 10" BENCH TOP DRILL PRESS OFFERS REAL VALUE FOR MONEY SPENT:
MOTOR - 1/2HP, 120V, 9.4A, 1PH, 1,720 RPM. SPEEDS (5) - 720, 1,070, 1,620, 2,360 AND 3,250 RPM. CHUCK - 1/2"; JT33 SPINDLE TAPER. SWING - 10-1/8". STROKE - 1-15/16". TABLE SIZE - 6-1/2" X 6-1/2". OVERALL DIMENSIONS - 29-1/2"H X 10"W X 19-1/2"D. NET WEIGHT - 62 LBS. SHIPPING WEIGHT - 67 LBS.
NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Drill Presses
|
WOODTEK 8" BENCH TOP DRILL PRESS 5 SPEED
|
| 8" Bench Top Drill Press 5 Speed
|
WITH ITS THREE SPOKE WHEEL, TILTING CAST IRON TABLE (0° TO 45°, LEFT AND RIGHT), LOCKING HEIGHT ADJUSTMENTS AND QUIET "V" BELT DRIVE MOTOR, THE WOODTEK® 8" BENCH TOP DRILL PRESS OFFERS REAL VALUE FOR MONEY SPENT:
MOTOR - 1/4HP, 120V, 5.9A, 1PH, 1,720 RPM. SPEEDS (5) 720, 1,070, 1,620, 2,360 AND 3,250 RPM. CHUCK - 1/2"; JT33 SPINDLE TAPER. SWING - 8-1/8". STROKE - 1-15/16". TABLE SIZE - 8-3/16" X 8-1/16". OVERALL DIMENSIONS - 23-1/4"H X 9-1/2"W X 17"D. NET WEIGHT - 37 LBS. SHIPPING WEIGHT - 42 LBS.
NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Drill Presses
|
PROXXON THREE SPEED BENCH DRILL PRESS CAN DRILL HOLES AS SMALL AS 0.02"
|
| Bench Top Drill Press
...plus other(s)
|
THE IDEAL MACHINE FOR PRECISE DRILLING, THE PROXXON MODEL 38 128 THREE SPEED BENCH DRILL PRESS CAN CUT THE SMALLEST DIAMETER HOLES WITH EXTREMELY HIGH ACCURACY:
120V MOTOR USES ALUMINUM PULLEYS AND FLAT BELT FOR 1,800, 4,700 AND 8,500 RPM SPINDLE SPEEDS. DIE CAST ALUMINUM WITH HARD CHROMED STEEL COLUMN; ADJUSTABLE FENCE INCLUDES SCALE. 1.25" QUILL DIAMETER WITH RETURN SPRING; CHROME FEED LEVER WITH ADJUSTABLE DEPTH GAUGE. 5.5" THROAT DEPTH; CLAMP LEVER FOR QUICK HEIGHT ADJUSTMENTS. 11"H X 8.7D" X 4.7"W. INCLUDES SIX, TRIPLE SLIT PRECISION COLLETS FOR 0.04" TO 0.125" SHAFTS AND INSTRUCTION MANUAL. 121-610 - OPTIONAL CHUCK, WITH KEY, ACCOMMODATES DRILL BITS UP TO 0.24"; 10,000 RPM MAXIMUM SPEED. GERMANY.
|
|
|
|
Machinery - Drill Presses
|
JET® 15" BENCHTOP OR FLOOR MOUNT DRILL PRESS - IT'S YOUR CHOICE
|
| 15" Benchtop Drill Press 16-spd
...plus other(s)
|
WHETHER YOU SELECT THE BENCHTOP OR THE FLOOR MODEL, THE JET® 15" VARIABLE SPEED DRILL PRESS IS A FULLY FUNCTIONING, HEAVY DUTY MACHINE WITH 16 SPEEDS RANGING FROM 200 TO 3,630 RPM:
3/4HP, 115/230V, 1PH MOTOR - 5/8" CHUCK, 3-1/8" SPINDLE TRAVEL, MT-2/JT-33 SPINDLE TAPER. UPFRONT, MECHANICAL PUSH BUTTON ON/OFF SWITCH. 2-7/8" DIA. COLUMN - DEPTH STOP DISPLAYS INCH/MM AND FEATURES QUICK SET BOLT. ROTATING, ±45° 13" X 16" CRANK OPERATED TABLE HAS "X" PATTERN MOUNTING GROOVES. BUILT IN WORKLIGHT (BULB NOT INCLUDED), CHUCK KEY AND INSTRUCTIONS INCLUDED. 39-1/2"H X 13"W X 31"D (BENCHTOP MODEL). 150 LBS. NET WEIGHT; 163 LBS. SHIPPING WEIGHT. 63"H X 13"W X 31"D (FLOOR MODEL). 180 LBS. NET WEIGHT; 193 LBS. SHIPPING WEIGHT. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
JET® 16-1/2" FLOOR MOUNT DRILL PRESS HAS PRODUCTION FACILITY CAPABILITIES
|
| 16-1/2" Drill Press 16-spd, 3/4hp
...plus other(s)
|
WITH 16 SPEEDS RANGING FROM 200 TO 3,630 RPM, THE JET® JDP-17MF 16-1/2" DRILL PRESS CAN BE COUNTED UPON FOR CONSISTENT PERFORMANCE UNDER CONTINUING WORKLOADS:
3/4HP, 1PH, 115/230V MOTOR - 5/8" CHUCK, 4-3/8" SPINDLE TRAVEL, MT-2 SPINDLE TAPER. UPFRONT, MECHANICAL PUSH BUTTON ON/OFF SWITCH. 3-1/8" DIA. COLUMN - 1/2" DIA. POSITIVE DEPTH STOP WITH DUAL LOCKING NUT. ROTATING ±45° 13-3/4" DIA. CRANK OPERATED TABLE WITH QUICK RELEASE CLAMP. BUILT IN WORKLIGHT (BULB NOT INCLUDED), CHUCK KEY AND INSTRUCTIONS INCLUDED. 66" HIGH W/11-1/8" X 19-5/8" BASE. 178 LBS. NET WEIGHT; 191 LBS. SHIPPING WEIGHT. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
POWERMATIC® 18" DRILL PRESS LETS YOU CHANGE SPEED WITHOUT MANUALLY CHANGING THE BELT
|
| Pm2800 18" Drill Press 1hp 120/230
...plus other(s)
|
A SLIDING LEVER ON THE POWERMATIC® MODEL PM2800 18" FLOOR MODEL DRILL PRESS IS ALL THAT'S NEEDED TO SELECT THE SPEED YOU WANT USING JUST ONE HAND - NO MORE LOOSENING AND MOVING THE DRIVE BELT FROM PULLEY TO PULLEY. LASER CROSS HAIRS HELP ENSURE ACCURATE, CONSISTENT DRILLING:
1HP, 115/230V, 1PH, 400-3.000 RPM TEFC MOTOR - 5/8" KEYLESS CHUCK W/MT2 X JT33 SPINDLE TAPER. 3-1/8" DIA. COLUMN; 4-3/8" SPINDLE TRAVEL; 18" SWING. 14" X 16" CAST IRON TABLE, WITH TWO MITER SLOTS, TILTS 90° AND EXTENDS TO 16" X 26" TO HANDLE LONGER STOCK. ADJUSTABLE SPLIT FENCE HAS BUILT-IN DUST PORT. COMES WITH ASSEMBLY HARDWARE, WRENCHES AND INSTRUCTIONS. 68-1/2"H X 20"W X 31-1/2"D; 11-7/8" X 19-5/8" "FOOTPRINT". 287 LBS. NET WEIGHT; 302 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
GENERAL INTERNATIONAL® 17", 12-SPEED DRILL PRESS WITH EXTENDED 6" STROKE
|
| 17" Drill Press, 12-spd, 6" Stroke, 1hp
|
MODEL #50-560A M1 17" DRILL PRESS HAS A HEAVY-DUTY DESIGN THAT IS INTENDED FOR INDUSTRIAL USE, AND CONTAINS A 12-SPEED 1HP MOTOR. THE 6" EXTENDED STROKE IS PERFECT FOR APPLICATIONS WHERE DEEPER DRILLING IS REQUIRED.
FEATURES:
3/4" PRECISION CHUCK FOR ACCURATE DRILLING. EXTRA LONG FEED HANDLESFOR BETTER FEED CONTROL. METAL PULLEY COVER FOR DURABILITY. NON-SLIP POSITIVE DRILL STOP FOR PRE-MEASURED DRILL DEPTH. 12 SPEEDS RANGING FROM 340 TO 2800 RPM FOR METAL, WOOD OR PLASTIC APPLICATIONS. 1 HP TOTALLY ENCLOSED CSA APPROVED MOTOR. CAST-IRON PULLEYS FOR VIBRATION FREE PERFORMANCE. RECISION BEARINGS FOR ACCURATE DRILLING AND LONG SERVICE LIFE. SEE-THROUGH FLIP UP CHUCK GUARD INCLUDED.
|
|
|
|
Machinery - Drill Presses
|
WOODTEK® 13" BENCH TOP DRILL PRESS
|
| 13" Bench Top Drill Press, 16-spd, 1/2hp
|
|
WOODTEK® 16-SPEED DRILL PRESS EXPANDS THE SPEED RANGE FOR BENCH TOP DRILL PRESSES TO HANDLE LARGE DIAMETER OR DENSE MATERIAL APPLICATIONS THAT REQUIRE SLOW SPEEDS. ADD TO THIS A 5/8" CHUCK AND LARGE WORK TABLE & BASE FOR EXTRA CAPACITY NOT FOUND IN BENCH TOP MODELS. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED. MOTOR 1/2 HP SPEED RANGE 195-3,500 RPM CHUCK 5/8", JTS SWING 13-3/4" STROKE 3-1/16" TABLE SIZE 9" X 11-7/16" BASE SIZE 9-7/8" X 17-5/16" HEIGHT 39-3/8" NET WEIGHT 99 LBS. SHIPPING WEIGHT 106 LBS.
|
|
|
|
Machinery - Drill Presses
|
DELTA® 16-1/2" DRILL PRESS INCLUDES TWINLASER®
|
| 16-1/2" Drill Press, 1/2hp
...plus other(s)
|
DELTA® MODEL 17-950L 16-1/2" DRILL PRESS INTEGRATES A DUAL LASER POD THAT PROJECTS CROSSHAIRS ONTO THE TABLE AT THE POINT OF BIT CONTACT FOR MUCH MORE PRECISE DRILLING:
120V, 1/2HP, 1,720 RPM MOTOR; 12 SPEEDS - 250-3,000 RPM. 5/8" JACOBS® CHUCK AND KEY, 2" QUILL DIAMETER, 3-7/8" STROKE. ADJUSTABLE-POSITION LOCKING DEPTH STOP FOR ACCURATE DEPTH MEASUREMENT AND REPETITIVE DRILLING. ZERO-CLEARANCE MDF PLUNGE PLATE - 18" X 14" CAST IRON TABLE WITH T-SLOTS TILTS 0-45° FORWARD AND 0-90°, LEFT AND RIGHT. BELTS, STEP PULLEY, MOTOR CONTROL, WORK LIGHT AND INSTRUCTIONS INCLUDED. 66"H X 12-3/4"W X 25-1/4"D. NET WEIGHT 194 LBS.; 225 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
17" DRILL PRESS W/BACK FENCE
|
| 17" Drill Press W/back Fence
...plus other(s)
|
|
|
|
Machinery - Drill Presses
|
DELTA® 18" DRILL PRESS PROVIDES GREAT STOCK SUPPORT AND ACCURATE PERFORMANCE
|
| 18" Drill Press, 16-spd 3/4hp Tilt-table
...plus other(s)
|
|
OVERSIZED TABLE TILTS FORWARD 0-45° AND ROTATES LEFT/RIGHT 0-90° T-SLOTS ON TABLE FOR AUXILIARY BACK FENCE OR SHOP BUILT JIGS. REPLACEABLE PLUNGE PLATE ON TABLE FOR THROUGH DRILLING. 3/4 HORSEPOWER MOTOR PROVIDES PLENTY OF POWER. AUTO TENSIONING BELT DRIVE SYSTEM MAKES SPEED CHANGES EASY. DEPTH STOP WITH MICRO ADJUSTMENT AND INDEPENDENT DEPTH SCALE. AUTO BELT TENSIONING KEEPS MOTOR AND PULLEY IN ALIGNMENT FOR LESS VIBRATION. 6" QUILL STROKE PROVIDES EXTENDED DEPTH OF CUT. FULLY ADJUSTABLE LASER PROJECTS CROSSHAIR ON WORK PIECE. LED WORK LAMP OF FLEXIBLE GOOSENECK. LARGE NON-TIP BASE WITH FLAT MACHINED SURFACE AND ATTACHMENT SLOTS. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
WOODTEK 16-1/2" DRILL PRESS
|
| 16-1/2" Drill Press 12-spd 3/4hp
...plus other(s)
|
WITH ITS THREE SPOKE WHEEL, TILTING CAST IRON TABLE (0° TO 45°, LEFT AND RIGHT), LOCKING RACK AND PINION HEIGHT ADJUSTMENT AND QUIET, POWERFUL "V" BELT DRIVE MOTOR, THE WOODTEK® 16-1/2" FLOOR DRILL PRESS OFFERS REAL VALUE FOR MONEY SPENT:
MOTOR - 3/4HP, 120V, 11A, 1PH, 1,700 RPM. SPEEDS (12) - 250, 360, 410, 540, 590, 650, 1,090, 1,280, 1,450, 1,820, 2,180 AND 3,000 RPM. CHUCK - 5/8"; JT3/MT2 SPINDLE TAPER. SWING - 16-7/8". STROKE - 3-1/4". TABLE SIZE - 11" X 11". OVERALL DIMENSIONS - 65"H X 12-1/2"W X 20"D. NET WEIGHT - 165 LBS. SHIPPING WEIGHT - 197 LBS.
NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Drill Presses
|
WOODTEK® 21" FLOOR DRILL PRESS
|
| 21" Drill Press W/mortising Attachment
...plus other(s)
|
WITH ITS THREE SPOKE WHEEL, TILTING CAST IRON TABLE (0° TO 45°, LEFT AND RIGHT), LOCKING RACK AND PINION HEIGHT ADJUSTMENT AND QUIET, POWERFUL "V" BELT DRIVE MOTOR, THE WOODTEK® 21" FLOOR DRILL PRESS OFFERS REAL VALUE FOR MONEY SPENT:
MOTOR - 1HP, 120V, 12A, 1PH, 1,700 RPM. SPEEDS (12) - 180, 280, 300, 480, 500, 650, 1,250, 1,650, 1,700, 2,500, 2,850 AND 4,200 RPM. CHUCK - 5/8"; JT3/MT3 SPINDLE TAPER. SWING - 21-1/8". STROKE - 4-13/16". TABLE SIZE - 18-3/8" X 16-1/2". OVERALL DIMENSIONS - 68"H X 20"W X 22-1/2"D. NET WEIGHT - 326 LBS. SHIPPING WEIGHT - 346 LBS.
NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
IN ADDITION TO WOODTEK® 16-1/2" AND 21" DRILL PRESSES, MORTISING ATTACHMENT 832-294 FITS DELTA® AND CRAFTSMAN® 20" DRILL PRESSES AS WELL AS OTHERS WITH 2-15/16" COLLARS.
|
|
|
Click for More Info
|
Machinery - Edgebanding
|
SAFETY SPEED CUT 60HA HOT AIR EDGE BANDER GIVES AFFORDABLE TOP PERFORMANCE
|
| 60ha Hot Air Edge Bander
|
|
DIGITAL ELECTRONIC TEMPERATURE AND ELECTRONIC VARIABLE SPEED CONTROL. ELECTROMAGNETIC END CUTTER DOES NOT REQUIRE COMPRESSED AIR. ACCUTRIM EDGE TRIMMER USES PORTER-CABLE 28,000 RPM INDUSTRIAL TRIM MOTORS FOR FINISHED EDGES THAT DONT NEED FILING OR SANDING. USA. SPECIFICATIONS MOTOR: 230V, 20A, 1PH OPERATION TYPE: HOT AIR FEED: 0-15 FPM TRIM: AUTOMATIC TOP & BOTTOM CAPACITIES WIDTH: 1/2" - 1-3/4" THICKNESS: 1 MM DIMENSIONS: 40"H X 60"W X 36"D NET WEIGHT: 290 LBS. SHIPPING WEIGHT: 325 LBS.
|
|
|
|
Machinery - Edgebanding
|
SAFETY SPEED CUT 72GP GLUE POT EDGE BANDER IS AN EXTREMELY WELL MADE MACHINE AT AN AFFORDABLE PRICE
|
| 72gp Glue Pot Edge Bander
|
DIGITAL ELECTRONIC TEMPERATURE AND ELECTRONIC VARIABLE SPEED CONTROL. ELECTROMAGNETIC END CUTTER DOES NOT REQUIRE COMPRESSED AIR. ACCUTRIM EDGE TRIMMER USES PORTER-CABLE® 28,000 RPM INDUSTRIAL TRIM MOTORS FOR FINISHED EDGES THAT DON'T NEED FILING OR SANDING. USA.
SPECIFICATIONS MOTOR: 230V, 20A, 1PH OPERATION TYPE: GLUE POT FEED RATE: 0-24 FPM TRIM: AUTOMATIC TOP & BOTTOM CAPACITIES: WIDTH: 1/2" X 1-3/4", THICKNESS: 1 MM DIMENSIONS: 72"W X 42"H X 37"D NET WEIGHT: 350 LBS. SHIPPING WEIGHT: 400 LBS.
|
|
|
|
Machinery - Edgebanding
|
WOODTEK® MAKES EDGEBANDING QUICK, EASY AND AFFORDABLE
|
| Portable Edge Bander
...plus other(s)
|
LIGHT ENOUGH TO MOVE EASILY, THE WOODTEK® BENCHTOP EDGEBANDER HAS FEATURES FOUND ON MUCH LARGER UNITS:
STEINEL HL2000P ELECTRONICALLY CONTROLLED, DOUBLE INSULATED HEAT ELEMENT. TOP MOUNTED 200° TO 1,100° F. HEAT CONTROL ALLOWS APPLICATION OF A VARIETY OF EDGEBANDING MATERIALS, SUCH AS WOOD OR POLYESTER, TO MANY DIFFERENT SUBSTRATES. 3/4" TO 2" MATERIAL CAPACITY. BUILT IN CUT OFF KNIFE HAS PALM STRIKE KNOB FOR QUICK, CLEAN CUTS. 27" X 7-1/2" LAMINATE COVERED TABLE. FENCES AND GUIDES ADJUST USING THE SAME HEX WRENCH. 110V; UL LISTED. 27"W X 27"L X 10"H OVERALL. WEIGHS 30 LBS. IMPORTED.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX® AUTOMATIC PRODUCTION EDGEBANDER EB-25 READY FOR OPERATION IN JUST 60 SECONDS
|
| Eb-25(35) Auto Edgebander
...plus other(s)
|
FOR PANEL EDGEBANDING USING PREGLUED PVC, POLYESTER, MELAMINE AND WOOD TAPE, THE FLOOR-MOUNTED VIRUTEX® EB-25 AUTOMATIC PRODUCTION EDGEBANDER, WITH POWER FEEDER, IS A PRODUCTION FACILITY POWERHOUSE:
HOT AIR SYSTEM USES ELECTRONIC TEMPERATURE CONTROL TO HEAT TO 900°F IN ONE MINUTE. MOTORIZED TRIMMING HELPS ENSURE PRECISE EDGES. BELT DRIVE PROVIDES SMOOTHER OPERATION. ONE YEAR MANUFACTURER'S WARRANTY. SPAIN.
SPECIFICATIONS:
POWER - 220VAC, 15A, 1PH. FEED - 15 FPM POWER FEEDER W/AUTO EDGE FEED. TRIM - AUTOMATIC TOP, BOTTOM, FRONT AND END. CAPACITY - 7/16" - 2-1/2". DIMENSIONS - 67.7" X 37.4" X 53.1". WEIGHT - 260 LBS. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX® AUTOMATIC PRODUCTION EDGEBANDER
|
| Automatic Benchtop Edgebander
|
FOR EDGEBANDING USING PRE-GLUED PVC, MELAMINE AND VENEER, THE VIRUTEX ® EB10C BENCH MOUNT PRODUCTION EDGEBANDER PROVIDES SIMULTANEOUS, FLUSH, TOP AND BOTTOM TRIMMING PLUS AUTOMATIC ROUGH TRIMMING OF THE ENDS:
220VAC, 15A, 1PH HOT AIR SYSTEM USES ELECTRONIC TEMPERATURE CONTROL TO HEAT TO 900°F IN ONE MINUTE. 0.3" TO 2.55" THICKNESS CAPACITY. NO COMPRESSED AIR OR DUST COLLECTOR REQUIRED. TO EDGEBAND CURVED PIECES, REMOVE THE TRIMMING UNIT AND USE THE FOOT PEDAL TO CUT THE ENDS. 17"H X 37.4"W X 23.6"D. 79 LBS. NET WEIGHT; 84 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. SPAIN. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX BENCHTOP / PORTABLE GLUE POT EDGE BANDER CAN BE EASILY TRANSPORTED TO JOBSITES
|
| Glue Pot Edge Bander, Bench Top/portable
|
|
GLUE POT EDGE BANDER WITH TEMPERATURE CONTROL FOR PVC, POLYESTER, MELAMINE, WOOD VENEER TAPES OF UP TO 1/8" (3 MM) THICK AND PLASTIC LAMINATE STRIPS. EASY AND FAST SET UP OF TAPE HEIGHT AND PANEL THICKNESS. AUTOMATIC TAPE FEED WITH CONTROL. FAST HEAT UP TIME OF 10 MINUTES. RUSTIC IRON DROP PULLS ADD A UNIQUE APPEARANCE TO DOORS AND CABINETS. LIMITED TO QUANTITIES IN HAND
|
|
|
|
Machinery - Edgebanding
|
WOODTEK® MAKES EDGEBANDING QUICK, EASY AND AFFORDABLE
|
| Edgebander With Free Edge Trimmer
|
LIGHT ENOUGH TO MOVE EASILY, THE WOODTEK® BENCHTOP EDGEBANDER HAS FEATURES FOUND ON MUCH LARGER UNITS:
STEINEL HL2000P ELECTRONICALLY CONTROLLED, DOUBLE INSULATED HEAT ELEMENT. TOP MOUNTED 200° TO 1,100° F. HEAT CONTROL ALLOWS APPLICATION OF A VARIETY OF EDGEBANDING MATERIALS, SUCH AS WOOD OR POLYESTER, TO MANY DIFFERENT SUBSTRATES. 3/4" TO 2" MATERIAL CAPACITY. BUILT IN CUT OFF KNIFE HAS PALM STRIKE KNOB FOR QUICK, CLEAN CUTS. 27" X 7-1/2" LAMINATE COVERED TABLE. FENCES AND GUIDES ADJUST USING THE SAME HEX WRENCH. 110V; UL LISTED. 27"W X 27"L X 10"H OVERALL. WEIGHS 30 LBS. IMPORTED.
|
|
|
|
Machinery - Grinders
|
DEWALT® BENCH GRINDERS
|
| Dw756 6" Bench Grinder
...plus other(s)
|
DEWALT® HEAVY DUTY BENCH GRINDERS FEATURE CAST IRON HOUSINGS, PRECISION MACHINED ALUMINUM TOOL RESTS, WHEEL GUARDS AND EXHAUST PORTS. GRINDERS INCLUDE 36 AND 60 GRIT WHEELS, EYE SHIELDS, SPARK DEFLECTORS, TOOLS RESTS AND A WHEEL ADJUSTING WRENCH:
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
DW756 6" BENCH GRINDER 5/8HP, 120VAC, 4A, 3,450 RPM, 1/2" SPINDLE. 3/4" WIDE X 6" DIAMETER GRINDING WHEELS. 28.5 LBS. NET WEIGHT; 30.4 LBS. SHIPPING WEIGHT.
DW758 8" BENCH GRINDER 3/4HP, 120VAC, 4.2A, 3,600 RPM, 5/8" SPINDLE. 1" WIDE X 8" DIAMETER GRINDING WHEELS. 39.5 LBS. NET WEIGHT; 40.5 LBS. SHIPPING WEIGHT.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WHEEL DRESSING STICK - 145-001. DIAMOND WHEEL DRESSER - 110-849. ONEWAY SHARPENING JIGS - 882-931. TRU-GRIND SHARPENING JIGS - 141-518. FELT HONING WHEELS - 872-175. MUSLIN BUFFING WHEELS - 911-075. CGW GRINDING WHEELS - 105-677. NORTON GRINDING WHEELS - 138-860. PACIFIC GRINDING WHEELS - 106-856.
|
|
|
|
Machinery - Grinders
|
GENERAL® LOW-SPEED BENCH GRINDERS
|
| 6" Low-speed Bench Grinder
...plus other(s)
|
GENERAL INTERNATIONAL® OFFERS THESE TWO LOW SPEED BENCH GRINDERS FOR SHARPENING CARBON AND HIGH SPEED STEEL CHISELS, TURNING TOOLS AND OTHER SHOP CUTTING KNIVES. THE SLOWER SPEED ALSO MAKES SHAPING STEEL TOOLS COOLER AND EASIER WHILE MINIMIZING BURN. FEATURES DOUBLE SEALED BEARINGS, ADJUSTABLE TOOL RESTS, LARGE WHEEL-TO-MOTOR CLEARANCE, GOOSENECK WORK LIGHTS, EYE SHIELDS, ADJUSTABLE SPARK DEFLECTORS AND WHEEL COVERS:
OPTIONAL HEAVY DUTY 36" CAST IRON AND TUBE STEEL PEDESTAL AVAILABLE. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
MODEL 15-625 6" LOW-SPEED BENCH GRINDER
1/3 HP, 110V, 1PH, 3.5A. 1725 RPM - 1/2" DIA. SHAFT. ADJUSTABLE ALUMINUM TOOL RESTS. INCLUDES 36 GRIT AND 60 GRIT 6" X 3/4" GRINDING WHEELS. NET WEIGHT: 21 LBS.
MODEL 15-825 8" LOW-SPEED BENCH GRINDER
1/2HP, 110V, 1PH, 5A. 1,725 RPM - 5/8" DIA. SHAFT. ADJUSTABLE CAST IRON TOOL RESTS. INCLUDES 36 GRIT AND 60 GRIT 8" X 3/4" GRINDING WHEELS. NET WEIGHT: 42 LBS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WHEEL DRESSING STICK - 145-001. DIAMOND WHEEL DRESSER - 110-849. CGW GRINDING WHEELS - 105-677. NORTON GRINDING WHEELS - 138-860. PACIFIC GRINDING WHEELS - 106-856. ONEWAY SHARPENING JIGS - 882-931. TRU-GRIND SHARPENING JIGS - 141-518. FELT HONING WHEELS - 872-175. MUSLIN BUFFING WHEELS - 911-075.
|
|
|
|
Machinery - Grinders
|
TORMEK® T-7 WATER COOLED SHARPENING SYSTEM
|
| T-7 Tormek Water Cooled Grinder
...plus other(s)
|
RECOGNIZED AS ONE OF THE FINEST WATER COOLED SHARPENING SYSTEMS ON THE MARKET, THE TORMEK® T-7 FEATURES A SLOW TURNING 2" WIDE X 10" DIAMETER SG-250 220 GRIT ALUMINUM OXIDE GRINDSTONE FOR SHARPENING KNIVES, CHISELS, TURNING TOOLS, PLANER BLADES AND A HOST OF OTHER CUTTING TOOLS. THE GRINDSTONE IS PAIRED UP WITH AN 8-5/8" DIA. X 1-1/4" WIDE LA-220 LEATHER HONING WHEEL TO PRODUCE VERY SHARP CUTTING EDGES. THE BASIC T-7 SYSTEM COMES WITH SEVERAL ACCESSORIES ALONG WITH A HANDBOOK AND AN INSTRUCTIONAL DVD. A WIDE VARIETY OF JIGS ARE AVAILABLE THAT CAN BE PURCHASED INDIVIDUALLY OR IN THE ACCESSORY HAND TOOL KIT AND WOODTURNER'S KIT. A COMPLETE TORMEK® T-7 SHARPENING SYSTEM WOULD INCLUDE THE T-7, THE HAND TOOL KIT, THE WOODTURNER'S KIT AND THE SVH-320 PLANER/JOINTER BLADE JIG:
90 RPM INDUSTRIAL MOTOR FOR CONTINUOUS USE. STURDY 1/8" THICK STEEL CASE WITH CARRYING HANDLE. REMOVABLE WATER TROUGH. USED IN MANY COMMERCIAL WOODWORKING SHOPS. 7 YEAR MANUFACTURER'S WARRANTY. SWEDEN.
SPECIFICATIONS:
MOTOR: 115VAC, 1.8A, 3600 RPM DC MOTOR. SPEED: 90 RPM. GRINDSTONE: 10" DIA., 2" WIDE, 12MM BOORE. HONING WHEEL: 8-5/8" DIA., 1-1/4" WIDE. DIMENSIONS: 12-3/4"H X 15"W X 10"D. SHIPPING WEIGHT: 37-1/2 LBS.
BASIC T-7 SYSTEM INCLUDES:
US-105 UNIVERSAL TOOL SUPPORT WITH MICROADJUST. SE-76 SQUARE EDGE JIG FOR PLANE IRONS AND WOOD CHISELS. TT-50 TRUING AND DRESSING TOOL TO KEEP THE STONE ROUND AND FLAT. SP-650 STONE GRADER CHANGES THE STONE TO ABOUT A 1000 GRIT FINISH. WM-200 ANGLEMASTER SETS EDGE ANGLES FROM 10° TO 75°, W/1° ACCURACY. PA-70 HONING COMPOUND USED WITH THE LEATHER HONING WHEELS. HB-10 HANDBOOK ("WATER COOLED GRINDING AND SHARPENING OF EDGE TOOLS"©), 156 PAGES WITH 560 DETAILED DRAWINGS. DVD-1 INSTRUCTIONAL VIDEO ("EDGE TOOL SHARPENING THE TORMEK® WAY"), 24-MINUTE T-7 SHARPENING VIDEO.
ADDITIONAL ACCESSORIES:
SVM-45 KNIFE JIG - SHARPENS KNIVES AND CARVER'S DRAW KNIVES (2-3/8" MINIMUM BLADE LENGTH). SVM-140 LONG KNIFE JIG - FOR LONG THIN KNIVES AND PORTABLE ELECTRIC HAND PLANER BLADES (4-3/4" MINIMUM BLADE LENGTH). SVX-150 SCISSORS JIG - SHARPENS ALL SIZES OF SCISSORS AND SHEARS. SVA-170 AXE JIG - FOR CARVING AND CARPENTER'S AXES (6-1/2" MAXIMUM AXE SIZE). SVS-32 SHORT TOOL JIG - FOR STRAIGHT SHANKED CARVING GOUGES, V-TOOLS DOWN TO 1-3/4", SHORT WOOD CHISELS AND POWER CARVER CHISELS (1-1/4" MAXIMUM TOOL WIDTH). SVD-185 GOUGE JIG - SHARPENS WOODTURNING GOUGES, BENT CARVING GOUGES AND V-TOOLS (1" MAXIMUM TOOL WIDTH). INCLUDES TURNING RING TOOL CUTTER ADAPTER. SVS-50 MULTI-JIG - SHARPENS TURNING SKEW CHISELS, PARTING AND BEADING TOOLS, ROUGHING GOUGES AND STRAIGHT CARVING GOUGES UP TO 2" WIDE. SVD-110 TOOL REST - A 3-1/2" X 4-1/4" PATENTED LOCKING PLATFORM FOR SHARPENING WOODTURNING SCRAPERS, HOLLOWING TOOLS, PARTING TOOLS, CABINET SCRAPERS, SCREWDRIVERS AND SPOKESHAVE BLADES. SVH-320 PLANER/JOINTER BLADE JIG - SHARPENS ANY LENGTH HSS PLANER AND JOINTER BLADE (1/2" MINIMUM WIDTH). ALSO FOR MITER GUILLOTINE BLADES. DBS-22 DRILL BIT SHARPENING ATTACHMENT - SHARPENS DRILL BITS FROM 1/8" TO 7/8" IN DIAMETER LA-120 PROFILED LEATHER HONING WHEEL - FOR HONING THE INSIDE OF SMALL CHISEL GOUGES AND V-TOOLS. INCLUDES TWO LEATHER DISCS - ONE WITH 1/8" RADIUS TIP AND ONE WITH 60° POINTED TIP. TTS-100 TURNING TOOL SETTER - GAUGE FOR SETTING SHAPES AND EDGE ANGLES WHEN USING SVD-185 AND SVS-50. RECIPE LABEL SET (BAG OF 12) FOR CONVENIENT LABELING OF SHARPENING ANGLES ON TURNING TOOLS FOR USE WITH SVD-185 AND SVS-50. TNT-300 WOODTURNER'S INSTRUCTION BOX - INCLUDES 80-MINUTE DVD AND INSTRUCTION HANDBOOK FOR USE WITH WOODTURNING JIGS. MH-380 MACHINE COVER - PROTECTS MACHINE FROM WOOD DUST. SB-250 BLACKSTONE SILICON GRINDSTONE - A 220 GRIT GRINDSTONE DESIGNED FOR SHAPING AS WELL AS SHARPENING. REMOVES MATERIAL FASTER BUT WITH LESS SURFACE FINISH. CAN BE ALTERED WITH 1000 GRIT SP-650 STONE GRADER. SJ-250 JAPANESE WATERSTONE GRINDSTONE A 4000 GRIT GRINDSTONE THAT EXCELS AT SHARPENING CARVING TOOLS, KNIVES, SCISSORS, PLANE IRONS AND WOOD CHISELS WHERE A MINIMUM OF STEEL REMOVAL PRODUCES A SUPERIOR SURFACE EDGE AND FINISH. REPLACEMENT SG-250 ORIGINAL TORMEK GRINDSTONE. REPLACEMENT LA-220 LEATHER HONING WHEEL. REPLACEMENT SE-76 SQUARE EDGE JIG. REPLACEMENT US-105 UNIVERSAL TOOL SUPPORT WITH MICROADJUST. REPLACEMENT XB-100 HORIZONTAL BASE FOR UNIVERSAL TOOL SUPPORT. REPLACEMENT WM-200 ANGLEMASTER. REPLACEMENT TT-50 TRUING AND DRESSING TOOL. REPLACEMENT SP-650 STONE GRADER. REPLACEMENT PA-70 HONING COMPOUND. REPLACEMENT HB-10 HANDBOOK. REPLACEMENT DVD-1 INSTRUCTIONAL VIDEO.
ACCESSORY KITS:
HTK-705 HAND TOOL KIT CONTAINS HAND TOOL JIGS FOR SHARPENING KNIVES, SCISSORS, DRAW KNIVES, AXES, SHORT CHISELS AND CARVING TOOLS IN A CONVENIENT STORAGE BOX. INCLUDES SVM-45, SVM-140, SVX-150, SVS-32 AND SVA-170. TNT-708 WOODTURNER'S KIT CONTAINS WOODTURNING JIGS FOR SHARPENING GOUGES, CHISELS, SCRAPERS AND RING CUTTERS IN A CONVENIENT STORAGE BOX. INCLUDES SVD-185, SVS-50, TTS-100, SVD-110, LA-120, MH-380 AND TTN-300.
MSK-250 STAINLESS STEEL SHAFT WITH EZYLOCK THIS SYSTEM MAKES IT EASY TO CHANGE GRINDING STONES WITH A KNURLED NUT. INCLUDES STAINLESS STEEL SHAFT, BEARINGS AND EZYLOCK NUT.
|
|
|
|
Machinery - Grinders
|
WOODTEK WATER COOLED SHARPENER
|
| Water Cooled Sharpener
...plus other(s)
|
THE COMPACT WOODTEK® WATER COOLED SHARPENING MACHINE HAS A GRINDING WHEEL THAT SPINS AT 420 RPM FOR ULTRA SMOOTH, PRECISION SHARPENING:
BELT DRIVEN AND RUNNING NEARLY VIBRATION FREE, IT EASILY SHARPENS PLANE IRONS, KNIVES, PLANER KNIVES, DRAWKNIVES, SCISSORS AND OTHER TOOLS AND BLADES. BUILT IN, ADJUSTABLE STEEL GUIDE MAKES IT EASY TO FOLLOW THE CORRECT ANGLE FOR ANY TYPE OF EDGE; DURABLE PLASTIC BODY. GRINDING WHEEL, UPPER AND LOWER WATER TANKS, WATER ADJUSTMENT VALVE, SPONGE AND COMPLETE INSTRUCTIONS INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1/6 HP, 115V, 1PH, 1.2A, 3,450 RPM (8' POWER CORD WITH PLUG INCLUDED). ON/OFF SWITCH - TOGGLE, MECHANICAL. WHEEL - 7" DIA. X 3/4", 1,000 GRIT. OVERALL DIMENSIONS - 10"H X 10-1/2"W X 13-3/4"D. NET WEIGHT - 14 LBS. SHIPPING WEIGHT - 16-1/2 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Jointers & Planers
|
STEEL CITY™ 12" PARALLELOGRAM JOINTER MAINTAINS UNIFORM, CLOSE CLEARANCES
|
| 12" Parallelogram Jointer 3 Knife
...plus other(s)
|
IN ADDITION TO AN OVERSIZED, CENTER-MOUNTED, CAST IRON FENCE THAT PROVIDES MAXIMUM SUPPORT THROUGHOUT THE ENTIRE CUT, THE STEEL CITY™ MODEL 40610 12" INDUSTRIAL JOINTER FEATURES AN EXTRA LONG TABLE TO SUPPORT OVERSIZED WORKPIECES:
3HP, 230V, 15A, 1PH, 3,450 RPM TEFC MOTOR W/MAGNETIC ON/OFF SWITCH. 3 HSS KNIVES - 3-7/8" DIA., 5,000 RPM CUTTERHEAD; 15,000 CPM. 12" X 83-1/2" LONG CAST IRON TABLE IS 31" HIGH. 5-3/8"H X 47"L FENCE TILTS 45° IN OR OUT (POSITIVE 45° AND 90° STOPS). 12"W X 3/4"D CUTTING AND 3/4" RABBETING CAPACITIES. 43"H X 83-1/2"W X 39"D. 750 LBS. NET WEIGHT; 890 LBS SHIPPING WEIGHT. STAND, CUTTERHEAD GUARD, PULLEYS, 5" DUST PORT, PUSH BLOCKS, WRENCHES AND COMPLETE INSTRUCTIONS INCLUDED. FIVE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
STEEL CITY™ 6" AND 8" WEDGE BED JOINTERS PROVIDE AMPLE WORKING SPACE
|
| 6" Wedge Bed Jointer 3 Knife Head
...plus other(s)
|
IN ADDITION TO AN INTEGRAL MOBILE BASE FOR ADDED VERSATILITY, THE STEEL CITY™ MODEL 40615 6" DELUXE JOINTER (SHOWN) FEATURES AN OVERSIZED, CENTER-MOUNTED, CAST IRON FENCE THAT PROVIDES MAXIMUM SUPPORT THROUGHOUT THE ENTIRE CUT:
1-1/2HP, 120/240V, 1PH TEFC MOTOR (PREWIRED 115V) W/MECHANICAL ON/OFF SWITCH. 3 HSS KNIVES - 2-1/2" DIA., 5,000 RPM CUTTERHEAD; 15,000 CPM. 6"W X 68" LONG TABLE IS 32" HIGH. 4"H X 38"L FENCE TILTS 45° IN OR OUT (POSITIVE 45° AND 90° STOPS). 6-1/8"W X 1/2"D CUTTING AND 1/2" RABBETING CAPACITIES. 50"H X 68"W X 23"D. 204 LBS. NET WEIGHT; 231 LBS SHIPPING WEIGHT.
SIMILAR DESIGN MODEL 40620 8" DELUXE JOINTER FEATURES: 2HP, 240V, 1PH TEFC MOTOR W/MAGNETIC ON/OFF SWITCH. 3 HSS QUICK-CHANGE, DISPOSABLE DOUBLE-EDGE KNIVES - 3-1/8" DIA., 5,000 RPM CUTTERHEAD; 15,000 CPM. 8" X 75-1/2" LONG TABLE IS 31-1/2" HIGH. 5-1/2"H X 48"L FENCE TILTS 45° IN OR OUT (POSITIVE 45° AND 90° STOPS). 8"W X 1/2"D CUTTING AND 1/2" RABBETING CAPACITIES. 44"H X 75-1/2"W X 25"D. 447 LBS. NET WEIGHT; 563 LBS SHIPPING WEIGHT. NOTE: DOES NOT INCLUDE INTEGRAL MOBILE BASE.
CUTTERHEAD GUARD, 4" DUST PORT, PUSH BLOCKS, WRENCHES AND COMPLETE INSTRUCTIONS INCLUDED. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
WOODTEK 16" DOUBLE SIDED THICKNESS PLANER
|
| 16" Double Sided Planer
...plus other(s)
|
PLANING BOTH SIDES AT ONCE OR JUST ONE AT A TIME IS YOUR OPTION WITH THE WOODTEK® 16" DOUBLE SIDED PLANER, WHICH ALSO BRINGS PLANED SURFACES PARALLEL:
HAND WHEEL MOVES HEAD ASSEMBLY UP AND DOWN ON FOUR THREADED STEEL POSTS - LOCK KNOBS FASTEN INTO PLACE. COMBINATION INCH/METRIC SCALE FOR EASY, ACCURATE MEASUREMENTS. SPIRAL SERRATED, STEEL INFEED ROLLER USES CHAIN AND SPROCKET DRIVE TO ADVANCE LUMBER - RUBBER COATED OUTFEED ROLLER WON'T MAR FRESHLY PLANED SURFACES. GRAVITY OPERATED METAL FINGERS PREVENT KICKBACK. BUILT IN CASTERS MAKE IT EASY TO MOVE AROUND THE SHOP. TWO DUST COLLECTION HOODS, SIX WRENCHES, KNIFE SETTING GAUGE, HARDWARE AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
UPPER MOTOR - 3HP, 220V, 1PH, 15A, 3,450 RPM - 3 V-BELT DRIVE (5-1/2' LONG POWER CORD INCLUDED, PLUG NOT INCLUDED.). LOWER MOTOR - 2HP, 220V, 1PH, 15A, 3,450 RPM - 3 V-BELT DRIVE. ON/OFF SWITCH - PUSH BUTTON, MAGNETIC - SEPARATE UPPER AND LOWER START BUTTONS, ONE STOP BUTTON. CUTTERHEAD - 2.88" DIA, 3 KNIFE, 5,000 RPM, 15,000 CPM. FEED SPEED - 16 FPM OR 20 FPM. CAPACITY - 1/8" (TOP HEAD), 3/32" (BOTTOM HEAD) MAXIMUM CUT DEPTH, MAXIMUM 16" WIDE X 6" THICK, MINIMUM 6" LONG. FEED SPEED - 16 FPM OR 20 FPM. FEED ROLLERS (2) - 2" DIA. TABLE - 16" X 50" CAST IRON (INCLUDING TWO BOLT ON EXTENSIONS). DUST PORTS (2) - 4" DIA. OVERALL DIMENSIONS - 51"H X 33"W X 50"D. NET WEIGHT - 713 LBS. SHIPPING WEIGHT - 787 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)
