|
|
|
Adhesives - Specialty
|
FLEXIBLE SHEET VENEER CONTACT ADHESIVE
|
| Flexible Sheet Veneer Glue
...plus other(s)
|
FORMULATED FOR USE WITH A WIDE RANGE OF SHEET GOODS, FLEXIBLE SHEET VENEER (FSV) ADHESIVE PRODUCES A RIGID GLUE LINE THAT RESISTS MOVEMENT WHEN CURED - ESPECIALLY RECOMMENDED FOR BACKED VENEERS AND LAMINATES:
HIGHLY SOLVENT, WATER AND HEAT RESISTANT. CAN BE APPLIED WITH FOAM BRUSH, ROLLER OR SPRAY SYSTEM. MOST APPLICATIONS ONLY REQUIRE APPLYING FSV TO SUBSTRATE - VENEER CAN BE REPOSITIONED OR REMOVED FOR UP TO 10 MINUTES. ONE-HOUR SET TIME, 24 HOUR CURE TIME. WATER-BASED, NON-FLAMMABLE AND NO ANNOYING ODOR. WARM WATER AND SOAP CLEANUP BEFORE SET TIME.
NOTE: TO ENSURE PROPER PERFORMANCE, DO NOT ALLOW WATER-BASED FLEXIBLE SHEET VENEER (FSV) ADHESIVE TO FREEZE.
DUE TO CONDITIONS BEYOND OUR CONTROL, EXPOSURE TO FREEZING TEMPERATURES CAN OCCUR DURING SHIPPING:
BETWEEN OCTOBER 31 AND APRIL 1, IF YOUR ORDER INCLUDES FLEXIBLE SHEET VENEER (FSV) ADHESIVE, TELEPHONE US TOLL-FREE, AT 1-800-645-9292. WE WILL PROCESS YOUR ENTIRE ORDER BUT DELAY SHIPPING THIS WATER-BASED ITEM UNTIL APRIL 1 OR LATER - AT NO ADDITIONAL CHARGE. TO RECEIVE YOUR ORDER, INCLUDING FLEXIBLE SHEET VENEER (FSV) ADHESIVE, WITHOUT DELAY, IT IS NOT NECESSARY TO CALL - SIMPLY PLACE THE ENTIRE ORDER USING OUR WOODWORKER.COM WEB SITE. AS ALWAYS, WE RECOMMEND TESTING A PRODUCT ON SCRAP MATERIAL BEFORE APPLYING IT TO YOUR PROJECT.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® COLD PRESS FOR VENEER
|
| Titebond Cold Press Veneer Glue Qt
...plus other(s)
|
TITEBOND® COLD PRESS FOR VENEER HAS BEEN SPECIFICALLY FORMULATED FOR LARGE SCALE BONDING OF VENEERS TO FLAT SURFACES. YOU CAN USE IT FOR COLD PRESS LAMINATING OF WOOD TO SOLID WOOD, PARTICLEBOARD, MDF, PLYWOOD OR OTHER POROUS MATERIALS:
MODERATE SET SPEED (15 MINUTE ASSEMBLY TIME AFTER APPLICATION), LEAVES A TRANSLUCENT GLUE LINE AND PRODUCES NO HARMFUL OR CORROSIVE FUMES. PREVENTS BLEED THROUGH ON OPEN GRAIN AND UNBACKED WOOD VENEERS. CLEANS UP WITH WATER WHEN GLUE IS WET. FOR CONSISTENT COVERAGE A MECHANICAL SPREADER IS RECOMMENDED. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® GREENCHOICE™ CONTACT CEMENT IS SAFER FOR YOU AND THE ENVIRONMENT
|
| Titebond Neoprene Plus Clear Quart
...plus other(s)
|
ENVIRONMENTALLY SUPERIOR TITEBOND® GREENCHOICE™ NEOPRENE PLUS CONTACT CEMENT IS A FAST-GRAB, NONFLAMMABLE ADHESIVE THAT SPREADS EASILY OVER LARGE SURFACES. THIS POST-FORMING, HEAT RESISTANT ADHESIVE SPECIALIZES IN BONDING DECORATIVE LAMINATE, VENEER, LEATHER AND RUBBER SHEETING TO PLYWOOD, PARTICLEBOARD AND OTHER WOOD BASED COMPOSITES. ITS' FAST SET AND PROFESSIONAL STRENGTH ALLOWS FOR IMMEDIATE TRIMMING, CUT FILLING OR MACHINING AFTER APPLICATION. NEOPRENE PLUS CONTACT CEMENT IS VOC-COMPLIANT AND MEETS GREENSEAL GS-36 PRODUCT SPECIFICATION, MAKING IT NON-TOXIC AND NON-HARMFUL TO THE ENVIRONMENT. IT CONTRIBUTES TO HABITAT AND RESOURCE CONSERVATION AND DOES NOT CONTAIN HARMFUL CARCINOGENS OR EMIT DANGEROUS FUMES INTO THE ATMOSPHERE. THIS PRODUCT DOES NOT GIVE OFF A STRONG OFFENSIVE ODOR:
APPLY TO BOTH SURFACES, LET DRY AND BOND 2 HOUR WORKING TIME. BONDED ASSEMBLIES CAN BE MACHINED IMMEDIATELY. CLEANS UP WITH WATER WHILE WET. APPLY LIBERALLY WITH OUR GLUE ROLLERS, BRUSH, OR BY SPRAY; COVERS APPROX. 533 SQ FT PER GALLON, SINGLE SUDFACE COVERAGE. AVAILABLE IN NEUTRAL/CLEAR OR BLUE/GREEN IN QUARTS AND GALLONS. USA
|
|
|
|
Clamps And Vises - Specialty Clamps
|
WOODTEK 9" PRESS SCREW
|
| 9" Press Screw
|
WOODTEK® 9" PRESS SCREWS ARE A GREAT CHOICE FOR MAKING VENEERING FRAMES, AS PANEL CLAMPS OR FOR CUSTOM JIGS FOR ALL TYPES OF GLUING AND VENEERING OR OTHER ASSEMBLY OPERATIONS:
11/16" DIA. STEEL SCREW WITH SMOOTHLY CUT ACME THREADS. CRANK TYPE HANDLE AND REMOVABLE SWIVEL FACE. NOTCHED CENTER FLANGE FOR MOUNTING. MALLEABLE AND/OR DUCTILE IRON CASTINGS. 11-1/2"L X 6"W X 1-3/8"H; WEIGHS 1-7/8 LBS. IMPORTED."
|
|
|
|
Edgebanding/veneer And Composite
|
THERE'S NO IRONING WITH FASTEDGE™ EDGEBANDING
|
| 15/16"x50' White Pvc Psa Edgeband
...plus other(s)
|
FASTEDGE™ EDGEBANDING IS PEEL-AND-STICK EDGEBANDING THAT ACTUALLY WORKS:
ADHESIVE STRENGTHENS AS IT CURES, PROVIDING A LONG-LASTING, PERMANENT BOND. AVAILABLE IN HIGH QUALITY PVC OR REAL WOOD VENEERS THAT ACCEPT FINISHES - 15/16" X 50' ROLLS. PERFECT FOR FIELD REPAIRS, INSIDE AND OUTSIDE RADII, SCRIBE TAPE AND COUNTLESS OTHER APPLICATIONS.
|
|
|
|
Edgebanding/veneer And Composite
|
EDGEMATE® EDGEBANDING HAS HEAT SET ADHESIVE BACKING FOR HAND OR MACHINE APPLICATION
|
| 13/16" Alder-fleece-preglued
...plus other(s)
|
|
EDGEMATE® PREGLUED EDGEBANDINGS ARE DESIGNED FOR STRAIGHT LINE AND SIMPLE RADIUS OR CONTOUR APPLICATIONS DONE WITH HANDHELD IRONS OR HOT AIR EDGEBANDING MACHINES. CHOOSE FROM TEN VARIETIES OF UNFINISHED REAL WOOD VENEER BANDING WITH FLEECE BACKING OR KRAFT (PAPER) BACKING, AND FOUR COLORS OF UNBACKED POLYESTER BANDING, ALL WITH HOT MELT ADHESIVE. FLEECE EDGE BANDINGS ARE .022"+/-.002" THICK, FEATURE COLORED FLEECE BACKING, COLOR MATCHED FINGER JOINTS AND HIGH QUALITY PRE-APPLIED HOT MELT ADHESIVE. 13/16" WIDTH FLEECE EDGE BANDING IS AVAILABLE IN 50 FOOT OR 250 FOOT ROLLS; 1-1/2" WIDTH IS AVAILABLE IN 250 FOOT ROLLS; 2" WIDTH IS AVAILABLE IN 25 FOOT ROLLS. 7/8" KRAFT EDGE BANDINGS ARE .020"+/-.002" THICK, FEATURE A PAPER BACKING, COLOR MATCHED FINGER JOINTS A MINIMUM OF 8 FEET APART, AND HIGH QUALITY PRE-APPLIED HOT MELT ADHESIVE. PAPER BACKING ADDS STABILITY AND ADDITIONAL STRENGTH FOR SMOOTHER INSTALLATION, CLEANER TRIMMING AND GREATER IMPACT RESISTANCE. 7/8" KRAFT EDGE BANDINGS ARE AVAILABLE IN 250' ROLLS WITH FINGER JOINTS A MINIMUM OF 8' APART ABOVE EDGEBANDINGS ARE SANDED SMOOTH AND UNFINISHED. WE NOW OFFER THREE VARIETIES OF 13/16" X 250' FLEECE BACKED PRE-GLUED EDGEGBANDINGS WITH A UV CURED CLEAR LACQUER FINISH. PREFINISHED BANDINGS SAVE TIME IN APPLICATION AND FINISHING AND LOWER THE ENVIRONMENTAL IMPACT OF FINISHING EDGES IN YOUR SHOP. FINISHED ARE DURABLE AND IMPACT RESISTANT. PREFINISHED VARIETIES ARE CHERRY, MAPLE AND RED OAK. USA.
|
|
|
|
Edgebanding/veneer And Composite
|
PREFINISHED REAL WOOD EDGEBANDING
|
| 13/16" Cherry-preglued-prefinished
...plus other(s)
|
EDGEMATE® FLEECE EDGE CVR IS THE 'ORIGINAL' FLEECE BACKED COILED VENEER EDGEBANDING PRODUCT NOW OFFERED IN A PREFINISHED VERSION. EDGEMATE® FLEECE EDGE CVR IS THE 'ORIGINAL' FLEECE BACKED COILED VENEER EDGEBANDING PRODUCT NOW OFFERED IN A PREFINISHED VERSION.
THESE EDGEBANDINGS FEATURE A SPECIALLY SATURATED FLEECE MEMBRANE; CAREFULLY SELECTED PREMIUM GRADE VENEERS AND EXPERTLY MATCHED, VIRTUALLY UNDETECTABLE FINGER JOINTS. THE PREFINISHED VERSION OFFERS A UV CURED, HIGHLY DURABLE CLEAR LAQUER FINISH. THE UV FINISH BRINGS OUT THE NATURAL BEAUTY OF THE REAL WOOD AND PROVIDES RESISTANCE TO IMPACT, HEAT, STAINING AND SCRATCHING. USING PREFINISHED BANDINGS ELIMINATES THE FINISHING TIME AND REDUCES ENVIRONMENTAL CONCERNS AND DIFFICULTIES ASSOCIATED WITH EDGE FINISHING. WE OFFER NATURAL CHERRY, MAPLE AND RED OAK 13/16" X 250' ROLLS WITH HEAT SET BACKING OR 7/8" X 500' ROLLS WITHOUT ADHESIVE, FOR USE WITH AUTOMATIC EDGEBANDERS. STANDARD THICKNESS IS .020" ()20 MILS). USA>
|
|
|
|
Finishes - Finishing Materials
|
J.E. MOSER'S 938936 MOSER'S WOOD PREP PRE STAIN
|
| Moser's Wood Prep
|
MIXED WITH WATER TO CONDITION RAW WOOD AND VENEER; J.E. MOSER'S® WOOD PREP™ HELPS PREVENT BLOTCHES WHEN STAINING AND EVEN IMPROVES SMOOTHNESS WHEN SANDING
USE ON END GRAIN TO MINIMIZE DARKENING OR ON BRITTLE VENEERS TO LIMBER THEM UP FOR EASIER VENEERING. APPLY BY BRUSH, DIPPING, SPRAYING OR FOAM ROLLER (NOT FOR USE WITH PAPER BACKED VENEERS). 32 OZ. BOTTLE MAKES UP TO THREE QUARTS.
|
|
|
|
Hand Tools - Carving Tools
|
SUPERBLY BALANCED CARVING KNIVES
|
| Detail Carving Knife
...plus other(s)
|
SUPERBLY BALANCED CARVING KNIVES HAVE POLISHED TUNGSTEN AND CARBON BLADES, TAPERED TO A FINE POINT FOR INTRICATE DETAIL CARVING:
878-421 - DETAIL KNIFE HAS 1-3/16"L BLADE; 6-1/4" OVERALL. 878-428 - ROUGH OUT KNIFE HAS 2"L BLADE; 7" OVERALL. 878-435 - JUMBO KNIFE HAS 2-1/4"L BLADE; 7-1/4" OVERALL. PAKKA HARDWOOD VENEER HANDLES ARE DYED, PRESSED WITH EPOXY AND SHAPED (HANDLE COLORS WILL VARY). EACH KNIFE COMES WITH A LEATHER SHEATH. USA.
|
|
|
|
Hand Tools - Cutting
|
JAPANESE VENEER SAW
|
| Japanese Veneer Saw
...plus other(s)
|
TOP QUALITY WOOD VENEERS REQUIRE TOP QUALITY TOOLS LIKE THIS JAPANESE VENEER SAW:
CURVED BLADE FOR EASY CUTTING OF THIN VENEERS. COMFORTABLE 6" LONG WOODEN HANDLE - 3" LONG BLADE. 899-656 - REPLACEMENT BLADES AVAILABLE. JAPAN.
|
|
|
|
Hardware Storage - Cabinet Storage
|
WOODEN INSERTS HELP ORGANIZE SPICE DRAWERS
|
| 10" Wood Spice Drawer Insert
...plus other(s)
|
BIRCH VENEER KV® WOOD SPICE TRAY INSERTS HAVE FOUR COMPARTMENT ORGANIZERS TO HELP END SPICE DRAWER CLUTTER:
FIT DRAWERS 10-1/8 TO 19-1/8 INSIDE WIDTH. REQUIRE 21-1/2 INSIDE DRAWER LENGTH; 3-1/2 DRAWER DEPTH.
|
|
|
|
Hardware Storage - Cabinet Storage
|
REDESIGNED TOP MOUNT WASTE AND RECYCLING BINS
|
| 1-35qt Door Mount Waste Bin-white
...plus other(s)
|
TOP-MOUNTED KNAPE & VOGT® WASTE BINS HAVE WOODEN PLATFORMS THAT MOVE ON PRECISION, FULL-EXTENSION SLIDES FOR EASY ACCESS. RATED IN THE HEAVY-DUTY 100 LBS. WEIGHT CLASS, SLIDES EXCEED BHMA TEST REQUIREMENTS AND ARE SPECIFICALLY DESIGNED FOR 1-1/2" WIDE FACE FRAME CABINETRY (FOR FRAMELESS CABINETRY, ADDITIONAL BLOCKING MIGHT BE REQUIRED):
156-614 - SINGLE BIN UNIT INCLUDES ONE, 35-QUART WHITE BIN AND WIRE ACCESSORY BASKET TO HOLD TRASH BAGS - 19"H X 12"W X 24"D MINIMUM CABINET OPENING. 156-617 - DOUBLE BIN HAS TWO, 35-QUART WHITE BINS - 19"H X 15"W X 24"D MINIMUM CABINET OPENING. 156-620 - LARGER SINGLE BIN UNIT FEATURES 50-QUART WHITE BIN - 22"H X 14.5"W X 24"D MINIMUM CABINET OPENING. 3/4" THICK, FINISHED BIRCH VENEER PLYWOOD WITH SOFT RADIUS EDGES - DOOR-MOUNT BRACKETS OFFER SIX-WAY ADJUSTABILITY FOR PRECISE ALIGNMENT. OPTIONAL LIDS ARE AVAILABLE FOR 35 QT BINS. LIDS AD 3/4" TO BIN HEIGHT.
|
|
|
|
Kits
|
SEGMENTED BOWL KITS
|
| Anasazi Bowl Kit
...plus other(s)
|
DESIGNED FOR EASY ASSEMBLY AND TURNING, SEGMENTED BOWL KITS ARE A GOOD INTRODUCTION TO SEGMENTED TURNING. KITS INCLUDE ALL THE MATERIALS NEEDED TO COMPLETE THE PROJECTS INCLUDING DETAILED INSTRUCTIONS AND A FULL SCALE TEMPLATE FOR TURNING. THE SMALLER KITS HAVE ALL THE SEGMENTS CUT TO SIZE; ALL YOU NEED TO DO IS SAND THE PARTS AND ASSEMBLE PRIOR TO TURNING. THE LARGER KITS PROVIDE THE WOOD BUT THE SEGMENTS NEED TO BE CUT TO SIZE EXTENDING THE RANGE OF SEGMENTED TURNING TECHNIQUES:
THE SMALLER ANASAZI AND PINSTRIPE ARE ABOUT 4" IN DIAMETER WHILE THE LARGER PUEBLO AND CHACO KITS ARE ABOUT 8" IN DIAMETER. SMALL KITS REQUIRE A DISK OR BELT SANDER, C-CLAMPS AND A LATHE. LARGE KITS REQUIRE A SANDER, BANDSAW, C-CLAMPS AND A LATHE. DESIGNED BY BUD LATVEN FOR THE BOWL KIT COMPANY.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
SEGMENTED BOWL PLANS - 890-268. 10-PLAN SET - 127-127. SEGMENT DESIGN METHODS - 150-464. COLORED VENEERS - 119-276/A>.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX BENCHTOP / PORTABLE GLUE POT EDGE BANDER CAN BE EASILY TRANSPORTED TO JOBSITES
|
| Glue Pot Edge Bander, Bench Top/portable
|
|
GLUE POT EDGE BANDER WITH TEMPERATURE CONTROL FOR PVC, POLYESTER, MELAMINE, WOOD VENEER TAPES OF UP TO 1/8" (3 MM) THICK AND PLASTIC LAMINATE STRIPS. EASY AND FAST SET UP OF TAPE HEIGHT AND PANEL THICKNESS. AUTOMATIC TAPE FEED WITH CONTROL. FAST HEAT UP TIME OF 10 MINUTES. RUSTIC IRON DROP PULLS ADD A UNIQUE APPEARANCE TO DOORS AND CABINETS. LIMITED TO QUANTITIES IN HAND
|
|
|
|
Plans - Boxes & Sets
|
SEGMENTED BOWL PLANS
|
| Segmented Bowl Plans
...plus other(s)
|
WRITTEN BY BUD LATVEN FOR THE BOWL KIT COMPANY, THESE COMPREHENSIVE BOWL PLANS PROVIDE STEP-BY-STEP INSTRUCTIONS ON HOW TO BUILD DISTINCTIVE SEGMENTED AND STAVED BOWLS. EACH PLAN INCLUDES A COLOR REPRODUCTION, DESCRIPTIVE TEXT, STEP-BY-STEP PROCEDURES, MATERIALS LIST, EXPLODED VIEWS, DETAILED DRAWINGS AND A FULL SCALED TEMPLATE. PROJECTS ARE RATED BY COMPLEXITY FROM 1 TO 5 (EASY TO DIFFICULT). OTHER WOODS CAN BE SUBSTITUTED PRODUCING A RANGE OF DIFFERENT COLORED BOWLS. TOOLS REQUIRED INCLUDE A BANDSAW OR TABLE SAW, DISK OR STATIONARY BELT SANDER, CLAMPS AND A LATHE. BRIEF TURNING INSTRUCTIONS INCLUDED:
SOUTHWESTERN SERIES:
SEGMENTED BOWL PLAN (LEVEL 2), 7-1/2" DIA. X 5-1/2" TALL. HERRINGBONE BOWL PLAN (LEVEL 4), 8" DIA. X 5-1/2" TALL. SEEDPOT BOWL PLAN (LEVEL 3), 8" DIA. X 5" TALL. SQUASHPOT BOWL PLAN (LEVEL 3), 7-1/2" DIA. X 6" TALL. TEARDROP BOWL PLAN (LEVEL 4), 7" DIA. X 6" TALL.
CONTEMPORARY SERIES:
PINSTRIPE BOWL PLAN (LEVEL 2), 4" DIA. X 4" TALL. TULIPWOOD OPEN BOWL PLAN (LEVEL 1), 5" DIA. X 4" TALL. KINGWOOD VASE PLAN (LEVEL 2), 5" DIA. X 6-1/2" TALL. SATINWOOD OPEN BOWL PLAN (LEVEL 3), 4-1/2" DIA. X 6-1/2" TALL. FLUTED VENEERS PLAN (LEVEL 5), 7" DIA. X 5" TALL.
SPIRAL-BOUND 10-PLAN SET CONTAINS ALL OF THE PLANS IN ONE EASY REFERENCE BOOK. NOTE: WOOD NOT INCLUDED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
COLOR VENEER PACKS - 119-276. SEGMENTED BOWL KITS - 865-826. SEGMENTED DESIGN METHODS - 150-464.
|
|
|
|
Plans - Boxes & Sets
|
HIS AND HERS JEWELRY BOX PLANS FROM A MASTER BOX MAKER
|
| Jewelry Box Plan
|
RECOGNIZED AS ONE OF THE LEADING DESIGNERS OF PRESENTATION, JEWELRY AND SMALL STORAGE BOXES, CHARLIE JOHNSON RECOMMENDS HIGHLY FIGURED WOODS AND VENEERS TO BRING INTEREST TO HIS JEWELRY BOX PLANS:
LADY'S BOX IS 20"L X 10"D X 7-1/2"H AND HAS A LIFT OUT TRAY AS WELL AS A SLIDE OUT DRAWER. MAN'S BOX IS 16-1/2"L X 8-1/2"D X 5"H WITH A REMOVABLE TRAY. DETAILED INSTRUCTIONS MAKE THESE EASY ENOUGH FOR BEGINNERS, YET ELEGANT ENOUGH FOR EXPERIENCED WOODWORKERS.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
BENCH DOG® PANEL-LOC® SERVES AS HAND GUARD, TOO
|
| Panel-loc
|
USE IT FOR ROUTING PANELS OR RIPPING LARGE SHEETS OF PLYWOOD OR VENEER. BENCH DOG® PANEL-LOC® IS THE FIRST COMBINATION HAND GUARD AND PANEL HOLD-DOWN. PROTECTS HANDS, ELIMINATES CHATTER, REDUCES FATIGUE AND IMPROVES RESULTS. CAN ALSO BE USED WITH TABLE SAWS. USA.
UHMW PLASTIC CONTACT STRIP PLACES PRESSURE IN JUST THE RIGHT SPOT. FITS ALL BENCH DOG® PROFENCES™. INCLUDES 20" T-LOC™ T-TRACK FOR MOUNTING ON OTHER FENCES. 6 LBS.
|
|
|
|
Portable Power Tools Electric - Not Listed Elsewhere
|
VIRUTEX® PORTABLE, HOT AIR EDGEBANDER EASILY APPLIES PRE-GLUED PVC, MELAMINE OR WOOD VENEER
|
| Hand Held Edgebander
|
A SPECIAL DESIGN WITH ADJUSTABLE CLAMPS ENSURES THE VIRUTEX® AG98F PORTABLE, HOT AIR EDGEBANDER PRODUCES PRECISION WORK WITH GREAT STABILITY. PERFECT FOR CIRCULAR AND SHAPED PIECES:
110V, 1,500W ELEMENT - ONE MINUTE SET UP TIME. 572°F. OR 977°F. OPERATING TEMPERATURES 2" MAXIMUM EDGEBANDING WIDTH. WEIGHS 6 LBS. SPAIN.
|
|
|
|
Project Supplies - Pen & Pencil Mechanisms
|
SEGMENT DESIGN METHODS
|
| Segment Design Methods
|
SEGMENT DESIGN METHODS© FOR CONSTRUCTED WOODTURNINGS SHOWS HOW TO CONSTRUCT SEGMENTED FORMS USING TABLES, GUIDES AND MATERIALS LISTS USING THE PROCESSES AND TECHNIQUES DEVELOPED BY BUD LATVEN:
LEARN HOW TO CREATE SEGMENTED BOWLS OF ANY SIZE BY FOLLOWING STEP-BY-STEP INSTRUCTIONS IN A SAMPLE PROJECT. LEARN HOW TO USE A SAW GUIDE AND GUIDE TABLE (INCLUDED) FOR CUTTING ACCURATE SEGMENTS FOR BOWLS UP TO 20" IN DIAMETER WITHOUT MEASURING OR USING ANY MATH. PLANS INCLUDES INSTRUCTIONS, SAMPLE PROJECT, DIMENSIONS AND MATERIALS LISTS, TABLES, GUIDES AND GRAPH PAPER. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
COLOR VENEER PACKS - 119-276. SEGMENTED BOWL KITS - 865-826. SEGMENTED BOWL PLANS - 890-268.
|
|
|
|
Sawblades - Circular
|
STEEL CITY™ 8" STACK DADO SET IS HIGHLY DURABLE AND EASY TO SETUP
|
| 8" Stack Dado, 1/4" To 13/16"
|
THE STEEL CITY™ 8" STACK DADO SET CAN BE USED ON TABLE AND RADIAL ARM SAWS TO CUT SLOTS, GROOVES, DADOES AND RABBETS FROM WIDE IN EVERYTHING FROM VENEERED PLYWOODS AND LAMINATES TO SOLID WOOD:
INCLUDES 2-8" OUTSIDE BLADES, 5-CHIPPERS, 6-SHIMS PLUS A WOOD CASE. ADJUSTABLE FOR 1/4" TO 13/16" WIDTH CUTS. 5/8" ARBOR. WEIGHS 7 LBS. INCLUDING CASE. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Sawblades - Circular
|
DIABLO™ CONSTRUCTION SERIES SAW BLADES PROVIDE MORE WORK, LESS CHATTER
|
| 7-1/4" X 24t X 5/8" Framing Blade, Atb
...plus other(s)
|
FREUD® DIABLO™ CONSTRUCTION SERIES SAW BLADES HAVE BEEN SPECIFICALLY BUILT TO MEET THE NEEDS OF THE CONSTRUCTION AND REMODELING MARKETS:
LASER CUT ARBORS, STABILIZER VENTS AND HEAT EXPANSION SLOTS. MICROGRAIN TITANIUM CARBIDE TEETH FOR DURABILITY AND LONGER CUTTING LIFE; IDEAL FOR WET LUMBER. RED, PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. FRAMING BLADES REQUIRE LESS POWER FROM THE SAW, EXTENDING ITS LIFE. RIPPING AND GENERAL PURPOSE BLADES - OAK, PINE, PRESSURE TREATED LUMBER AND PLYWOOD. COMBINATION AND FINISH BLADES - GOOD CHOICES FOR PLYWOOD. FINE FINISH BLADES - OAK, PINE, MELAMINE, PLYWOOD AND MOLDING CROSSCUTTING. ULTRA FINISH BLADES - OAK, PINE, MELAMINE, VENEER PLYWOOD AND DELICATE MOLDING CROSSCUTTING. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® PREMIER FUSION™ 10" CIRCULAR SAWBLADE
|
| P410 10" X 40t Hi-atb Blade
...plus other(s)
|
A DOUBLE SIDE GROUND DESIGN FUSED WITH 30° HI-ATM TOOTH GEOMETRY MEAN THE NEW FREUD® F410 PREMIER FUSION™ 10" CIRCULAR SAWBLADE CAN PRODUCE FLAWLESS TOP, BOTTOM AND SIDE CUTS IN VENEERED PLYWOOD, HARDWOODS AND MELAMINE:
40 HI-ATB TICO™ CARBIDE TEETH, +18° HOOK ANGLE, 0.126 KERF, 0.098 PLATE, 5/8" ARBOR. 3/8" TO 1-1/2" DEEP RIP CUTS; 3/4" TO 3-1/2" DEEP CROSSCUTS. NON-STICK PERMA-SHIELD™ COATING RESISTS FRICTION, HEAT BUILDUP AND PITCH BUILD-UP. LASER CUT SLOTS MINIMIZE VIBRATION. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU80R PLYWOOD AND MELAMINE SAWBLADES
|
| 10"x80t Hiatb Crosscut Blade
...plus other(s)
|
FREUD® LU80R PLYWOOD AND MELAMINE SAWBLADES FEATURE A LASER CUT BLADE DESIGN WITH ANTI-VIBRATION SLOTS TO MAKE THE BLADE ACCOUSTICALLY NEUTRAL:
CRISP, SPLINTER AND CHIP FREE CUTS IN VENEERED PLYWOODS AND LAMINATES. TICO™ HIGH DENSITY CARBIDE TEETH - RED, NON-STICK PERMA-SHIELD™ COATING. KICKBACK REDUCING DESIGN. 2° HOOK ANGLE - HI-ATB GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® SUPER DADO SET INCLUDES SHIMS AND 6 CHIPPERS
|
| 6" Stack Super Dado, 5/8" Bore
...plus other(s)
|
THE FREUD® SUPER DADO SET CAN BE USED ON TABLE AND RADIAL ARM SAWS TO CUT CHIP FREE SLOTS, GROOVES, DADOES AND RABBETS FROM 1/4" TO 29/32" WIDE IN EVERYTHING FROM VENEERED PLYWOODS AND LAMINATES TO SOLID WOOD:
POLISHED METAL - AVAILABLE IN 6" (MODEL SD506) 8" (MODEL SD508) 10" (MODEL SD510) OR 12" (MODEL SD512) SETS. PROPERLY STRESSED AND TENSIONED 1/8" THICK OUTSIDE BLADES FEATURE VERY SHARP AND STEEPLY BEVELED CARBIDE TEETH (-12° HOOK ANGLE, 15° RELIEF ANGLE, 20° TOP BEVEL ANGLE) THAT LEAVE CLEANER EDGES. BLADES CUT 0.005" TO 0.010" DEEPER THAN CHIPPERS TO PREVENT TEAROUT ON CROSS GRAIN DADOES. INSIDE CHIPPERS FEATURE THE SAME CARBIDE - FOUR 1/8" THICK, ONE 3/32" AND ONE 1/16". NOT FOR USE ON HAND HELD SAWS. ITALY.
|
|
|
|
Sawblades - Scrollsaw
|
OLSON® CROWN TOOTH™ SCROLLSAW BLADE CUTS ON UP AND DOWN STROKES
|
| #2/0 20tpi Crown Tooth Blades
...plus other(s)
|
WITH 5" LONG OLSON® CROWN TOOTH™ SCROLLSAW BLADES YOU GET FORWARD AND REVERSE CUTTING FOR CLEAN, SMOOTH CUTS EVEN IN THIN PLYWOODS AND VENEERS:
WASTE IS BLOWN FROM THE CUT ON THE TOP AND BOTTOM, REDUCING HEAT BUILD-UP AND INCREASING CUTTING EFFICIENCY. WHEN A BLADE STARTS TO DULL, FLIP IT AND IT WILL CUT LIKE NEW. WIDE RANGE OF SIZES MAKE BLADES PERFECT FOR CUTTING SOFT AND HARDWOODS, PLYWOOD, PLASTICS AND ACRYLICS. 920-170, 920-219 - #2/0, 0.024"W, 0.011"T, 20 TOOTH BLADE. 920-177, 920-226 - #2, 0.026"W, 0.013"T, 20 TOOTH BLADE. 920-184, 920-233 - #3, 0.032"W, 0.014"T, 16 TOOTH BLADE. 920-191, 920-240 - #5, 0.038"W, 0.016"T, 16 TOOTH BLADE. 920-198, 920-247 - #7, 0.045"W, 0.017"T, 11 TOOTH BLADE. 920-205, 920-254 - #9, 0.053"W, 0.018"T, 6 TOOTH BLADE. 920-212, 920-261 - #12, 0.065"W, 0.024"T, 6 TOOTH BLADE.
|
|
|
|
Videos
|
"MASTERING YOUR BANDSAW" DVD
|
| Mastering Your Bandsaw Dvd
|
IN THE FINE WOODWORKING "MASTERING YOUR BANDSAW" DVD, YOU CAN WATCH PROFESSIONAL WOODWORKER MARK DUGINSKE AS HE SHOWS HOW TO PRECISELY TUNE AND ACCURATELY USE A BANDSAW. YOU'LL ALSO SEE AND HEAR HOW TO:
EFFORTLESSLY CHANGE BLADES. RESAW BOARDS FROM FIREWOOD. CUT YOUR OWN 1/32" THICK VENEER. MAKE PERFECT DOVETAILS. BUILD A CIRCLE JIG. CUT PERFECT CONES. MAKE BANDSAWN BOXES USING 2" THICK STOCK. VIEW ON DVD PLAYER AND HOME OR LAPTOP COMPUTER - DVD FORMAT LETS YOU TO SWITCH BACK AND FORTH FROM MENU TO VIDEO. FULL COLOR, 57 MINUTES - NTSC FORMAT, REGION 0 ENCODED FOR ALL-REGION COMPATIBILITY.
|
|
|
|
Videos
|
GET THREE INNOVATIVE WOODTURNING SOFTWARE PROGRAMS ON A SINGLE COMPACT DISC
|
| Woodturner Pro 3-in-1 Cd
|
YOU WILL BE AMAZED AT WHAT YOU CAN DO WITH THE THREE PROGRAMS CONTAINED ON THE WOODTURNER PRO 3-IN-1 COMPACT DISC:
3D DESIGN PRO LETS YOU CREATE A TWO DIMENSIONAL VESSEL WALL PROFILE AND THEN SEE A RENDERING IN THREE DIMENSIONS. START FROM SCRATCH OR OPEN ONE OF OVER 100 SAMPLE DRAWINGS. DESIGNED FOR ALL WOODTURNERS, NOT JUST SEGMENTED TURNERS. WOODTURNER PRO ALLOWS YOU TO ADD RINGS - FLAT, COMPOUND, STAVES AND VENEER - TO YOUR DESIGNS WITH A SINGLE MOUSE CLICK. DECIDE HOW MANY SEGMENTS PER RING AND USE ARROW KEYS TO IDENTIFY OUTSIDE AND INSIDE DIAMETERS. LAMINATION PRO HELPS YOUR DESIGN AND CONSTRUCT FEATURE RINGS FOR SEGMENTED VESSELS FROM LAMINATIONS. NOTE: INSTALLATION REQUIRES A PC RUNNING WINDOWS 95 OR ABOVE, 233 MHZ PROCESSOR, 20MB FREE HARD DISC SPACE AND 64MB RAM.
|
|
|
|
Wood Specialties - Not Listed Elsewhere
|
FASTCAP™ COVER CAPS HIDE SCREWS WITH STYLE
|
| White Pvc Fastcaps
...plus other(s)
|
FASTER AND MUCH BETTER LOOKING THAN SOFT PUTTY OR PLASTIC CAPS, PATENTED FASTCAP™ COVER CAPS ARE BUTTONS OF ACTUAL WOOD VENEER OR PVC THAT NATURALLY BLEND IN WITH CABINETRY:
REAL WOOD CAPS ACCEPT FINISHES, SO THEY CAN BE MATCHED TO JUST ABOUT ANY CABINET. PEEL-AND-STICK BACKS MAKE THEM VERY EASY AND QUICK TO INSTALL. 0.022" THICK X 9/16" (14MM) DIA. - SOLD IN SHEETS OF 52 OR MINI-BOXES OF 260.
128-339 - FLUSHMOUNT DRILLBIT SYSTEM SPEEDS INSTALLATION AND IMPROVES APPEARANCE: CUSTOM BIT ALLOWS YOU TO DRILL A PILOT HOLE AND COUNTERSINK A 9/16" DIA. OPENING IN ONE OPERATION (DRILL MOTOR NOT INCLUDED). CARBIDE DRILL BIT AND CUSTOM, TWO-PART DELRIN® STOP COLLAR HELP PREVENT SURFACE MARRING.
|
|
|
|
Wood Specialties - Not Listed Elsewhere
|
NATURAL WOOD VENEER CASTLE CAPS HAVE PRESSURE SENSITIVE ADHESIVE BACKS FOR EASIER CABINET MOUNTING
|
| Wht Pvc Castle Cap
...plus other(s)
|
DESIGNED TO COVER THE CUT OUT MADE BY A CASTLE MACHINE, CASTLE CAPS ARE AVAILABLE IN RED OAK AND MAPLE VENEER OR SMOOTH WHITE PVC TO BLEND IN WITH CABINETRY:
WOOD VENEER CAN BE STAINED AND FINISHED; WHITE PVC CAPS ALSO MAKE GREAT LABELS. SELF ADHESIVE BACKING MAKES FOR EASY AND QUICK INSTALLATION. SOLD IN SINGLE SHEETS; EACH SHEET HAS SIXTEEN 9/16" X 2-1/2" CAPS.
|
|
|
|
Wood Specialties - Veneer
|
ALLWOOD™ TWO-PLY VENEERS ELIMINATE BLACK LINES AT EDGES AND REDUCE "TELEGRAPHING"
|
| Red Oak 2'x8' Allwd Veneer
...plus other(s)
|
SHEETS OF ALLWOOD™ "A" GRADE VENEER ARE LAMINATED AT A RIGHT ANGLE TO VENEER OF THE SAME OR SIMILAR SPECIES TO OFFER THE LOOK OF SOLID WOOD ON LAMINATED SURFACES:
CONSTRUCTION REDUCES CHECKING, TELEGRAPHING AND OFFERS BETTER FLEXIBILITY. TWO PLY ALL WOOD CONSTRUCTION ELIMINATES THE BLACK LINES OFTEN FOUND AT THE EDGES OF OTHER VENEER APPLICATIONS. ALLWOOD™ VENEERS AVERAGE BETWEEN .038 AND.042 IN TOTAL THICKNESS INCLUDING FACE, LAMINATING ADHESIVE AND BACKING VENEER. SANDED SMOOTH, IT'S ALMOST READY TO FINISH. SOME VERY LIGHT FINAL SANDING WITH 220 GRIT PAPER MAY BE REQUIRED BEFORE FINISH IS APPLIED. AVAILABLE IN 24" X 96" AND 48" X 96" SHEETS IN EIGHT DOMESTIC WOOD VARIETIES. USA
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
888-864 - ROTARY CUTTER - CLICK HERE. 899-649 - JAPANESE VENEER SAW - CLICK HERE. 909-293 - OL' YELLER™ YELLOW WOOD GLUE - CLICK HERE. 893-723 - J-HANDLE/PRESSURE ROLLERS - CLICK HERE. 821-791 - SABEL® BLOCK ROLLER - CLICK HERE.
|
|
|
|
Advanced Search Tools
Browse
will
