NARROW RESULTS Results are sorted by product category.
(Clicking on the  will
narrow the results by subcategory)
|
|---|
Machinery (21)
Lathes (21)
|
|
|
Machinery - Lathes
|
PROXXON MICRO TURNING LATHE
|
| Proxxon Micro Lathe
...plus other(s)
|
THE GERMAN-ENGINEERED PROXXON MODEL DB 250 MICRO WOODTURNING LATHE IS PERFECT FOR TURNING SMALL ITEMS SUCH AS PENS, CHESS FIGURES, MINIATURES AND MUCH MORE IN A QUIET, VIBRATION-FREE OPERATION. THE TOOL REST ROTATES 360°. FREE ACCESSORIES ADD ADDITIONAL VALUE TO THIS GERMAN MADE MICRO TURNING LATHE:
INCLUDES ROTATING TOOL REST, DRIVE CENTER, LIVE CENTER, FACEPLATES, 6-PIECE COLLET SET (2, 3, 4, 6, 8 AND 10MM), 3-PIECE TURNING SET, SAFETY GOGGLES AND SANDPAPER. NET WEIGHT - 5.5 LBS. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. GERMANY.
SPECIFICATIONS:
MOTOR - 1/5HP, 120VAC, 1PH. SPEED RANGE - 1,000 TO 5,000 RPM. SWING OVER BED - 3-1/8". DISTANCE BETWEEN CENTERS - 9-3/4". HEADSTOCK THROUGH HOLE - 3/8" (10MM). TAILSTOCK QUILL TRAVEL - 3/4". OVERALL DIMENSIONS - 21-5/8"L X 3-7/8"W X 6-1/8"H.
|
|
|
|
Machinery - Lathes
|
POWERMATIC® 3520B LATHE
|
| Powermatic 3520b Lathe
...plus other(s)
|
THE FULLY ACCESSORIZED POWERMATIC® MODEL 3520B WOOD LATHE HAS IMPROVED FEATURES IN THIS THIRD GENERATION MODEL INCLUDING AN ENHANCED DIGITAL TACHOMETER, SPINDLE INDEXING, IMPROVED TOOL REST LOCKING AND A LASER ETCHED TAILSTOCK QUILL. THE DRIVE SYSTEM USES A TWO-STEP, POLY V-BELT DRIVE WITH TWO REVERSIBLE VARIABLE SPEED RANGES: 50-1,200 AND 125-3,200 RPM. AN OPTIONAL 50" BED EXTENSION BRINGS THE BETWEEN CENTERS DISTANCE TO 84" AND CAN BE USED IN CONJUNCTION WITH AND OPTIONAL 26" DOUBLE-POSTED TOOL REST FOR EXTRA LONG SPINDLE TURNING. THE MOVABLE HEADSTOCK SLIDES TO THE END OF THE BED FOR 38" SWING OUTBOARD BOWL TURNING WHEN USED WITH THE OPTIONAL 18" BED EXTENSION BOLTED TO THE LOWER MOUNT HOLES:
OPTIONAL 50" BED EXTENSION INCLUDES LEG SUPPORT. OPTIONAL 26" DOUBLE-POSTED TOOL REST REQUIRES AN ADDITIONAL TOOLREST BASE ASSEMBLY FOR OPERATION. OPTIONAL 18" BED EXTENSION INCLUDES TOOLREST BASE POST EXTENSION. LATHE INCLUDES 14" TOOL REST, 3" FACE PLATE, SPUR DRIVE, LIVE CENTER, SAFETY SHIELD, TOOL TRAY, METAL SHELF, DEAD CENTERS (2), WRENCH, KNOCKOUT ROD, SPINDLE LOCK AND INSTRUCTION MANUAL. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 2HP, 230VAC, 6.2A, 3PH (REQUIRES 230V, 20A, 1PH CIRCUIT INPUT). SPEED RANGES (2): 0-1,200 AND 0-3,200 RPM. INBOARD SWING - 20" (16" OVER BASE). BETWEEN CENTERS - 34-1/2". OUTBOARD SWING 38" HEADSTOCK SHAFT: 1-1/4"-8TPI, #2MT, 5/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 4-1/2" TRAVEL, #2MT, 3/8" BORE, SELF-EJECTING. SPINDLE HEIGHT 44" (W/2" ADJUSTABLE FEET). DIMENSIONS - 58"H X 50"W X 24"D. NET/SHIPPING WTS 682/720 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
POWERMATIC LIVE CENTER - 134-792. ONEWAY STRONGHOLD CHUCK - 959-979. ONEWAY TALON CHUCK - 959-627. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE ACCESSORIES. TURNING TOOLS.
|
|
|
|
Machinery - Lathes
|
POWERMATIC® 4224 LATHE
|
| Powermatic 4224 Lathe
...plus other(s)
|
THE POWERMATIC® 4224 WOOD LATHE IS A LONG AND STRONG CAST IRON WOOD LATHE DESIGNED FOR LARGE BOWL AND SPINDLE TURNING. IT USES A 3-STEP, POLY V-BELT DRIVE WITH THREE VARIABLE SPEED RANGES: 0-910 RPM FOR HEAVY BOWL WORK, 0-2,000 RPM FOR STANDARD TURNING AND 0-3,500 RPM FOR HIGH SPEED SPINDLE AND FINISHING WORK. THE SPINDLE DIRECTION IS REVERSIBLE FOR OUTBOARD TURNING AND A REMOTE ON/OFF SWITCH MAGNETICALLY ATTACHES TO ANY PART OF THE LATHE. AN OPTIONAL 65" INBOARD BED IS AVAILABLE WHICH BRINGS THE INBOARD BETWEEN CENTERS DISTANCE TO 109". FOR LONG SPINDLE TURNING, AN OPTIONAL 26" DOUBLE-POSTED TOOL REST IS USED WITH A SECOND INBOARD TOOLREST BASE. A 48" SWING OUTBOARD TURNING ASSEMBLY IS ALSO AVAILABLE FOR FREE HANGING OPEN BOWL AND PLATTER TURNING:
OPTIONAL 65" INBOARD BED INCLUDES SUPPORT LEG. OPTIONAL 48" SWING OUTBOARD TURNING ASSEMBLY COMPLETE INCLUDES 20" OUTBOARD BED W/SUPPORT LEG AND OUTBOARD TOOLREST BASE. LATHE INCLUDES 14" TOOL REST, 3" FACEPLATE, SPUR DRIVE, LIVE CENTER, REMOTE ON/OFF SWITCH, SAFETY SHIELD, SPINDLE LOCK, KNOCKOUT ROD, WRENCH AND OPERATION MANUAL. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 3HP, 230VAC, 6.2A, 3PH (REQUIRES 230V, 20A, 1PH CIRCUIT INPUT). SPEED RANGES (3): 0-910, 0-2,000 AND 0-3,500 RPM. INBOARD SWING - 24" (18-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 42". OUTBOARD SWING - 48". HEADSTOCK SHAFT: 1-1/4"-8TPI, #2MT, 5/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 4-1/2" TRAVEL, #2MT, 3/8" BORE, SELF-EJECTING. SPINDLE HEIGHT - 44" W/2" ADJUSTABLE FEET. OVERALL DIMENSIONS - 54-3/4"H X 65"W X 24"D. NET/SHIPPING WTS 848/904 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
POWERMATIC LIVE CENTER - 134-792. ONEWAY STRONGHOLD CHUCK - 959-979. SUPERNOVA2 CHUCK - 961-892. HIGH SPEED STEEL TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Machinery - Lathes
|
JET® MINI LATHES
|
| Jml-1014 Mini Lathe, 6-spd, 1/2hp
...plus other(s)
|
THE JET® MINI LATHES ARE MADE OF HEAVY DUTY CAST IRON WITH NON-SKID RUBBER FEET. THESE LATHES ARE AVAILABLE IN SIX-SPEED AND VARIABLE SPEED MODELS WITH A SPEED RANGE BETWEEN 500 AND 3900 RPM. THE HEADSTOCK HAS 1"-8TPI SPINDLE THREADS WITH 24-POINT INDEXING AND A SECURE SPINDLE LOCK. THE TAILSTOCK IS SELF-EJECTING WITH A 3/8" THROUGH HOLE. AN OPTIONAL 28" BED EXTENSION INCREASES THE BETWEEN CENTERS CAPACITY TO 42" AND AN OPTIONAL ADJUSTABLE FLOOR STAND FITS BOTH MODELS:
INCLUDES 6" TOOL REST, 3" FACEPLATE, SPUR CENTER, LIVE CENTER, KNOCKOUT ROD, SAFETY GOGGLES AND INSTRUCTION MANUAL. NET WEIGHT - 72 LBS, SHIPPING WEIGHT - 80 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
JET® JML-1014 MINI LATHE. 1/2 HP, 115VAC, 5A, 1PH MOTOR. SIX SPEEDS: 500, 840, 1240, 1800, 2630, 3975 RPM.
JET® JML-1014VS MINI LATHE. 1/2 HP, 115VAC, 5A, 1PH MOTOR. VARIABLE SPEEDS FROM 500 TO 3900 RPM.
SPECIFICATIONS:
SWING OVER BED - 10" (7-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 14". HEADSTOCK SHAFT: 1"-8TPI THREADS, #2MT, 3/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2" TRAVEL, #2MT, 3/8" BORE. OVERALL DIMENSIONS: 14-1/8"H, 28-1/8"W, 10-1/4"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HIGH SPEED STEEL TURNING TOOLS - 142-607. POWDER METAL TURNING TOOLS - 137-093. CARBON STEEL TURNING TOOLS - 873-826. SORBY LIVE CENTER SYSTEM - 137-177. ONEWAY TALON CHUCK - 959-627. NOVA G3 CHUCK - 962-546. VEGA MIDI LATHE DUPLICATOR - 139-424.
|
|
|
|
Machinery - Lathes
|
JET® 1236 LATHE
|
| Jet 1236 Lathe
...plus other(s)
|
THE JET® JWL-1236 WOOD LATHE HAS A CAST IRON BED WITH A HEADSTOCK THAT ROTATES 360° WITH STOPS AT 45°, 90° AND 180°. THE DRIVE SYSTEM HAS VARIABLE SPEEDS FROM 500 TO 3000 RPM WITH SIX PRESET DETENTS FOR COMMONLY USED SPEEDS. A SHORT OUTBOARD BED IS SUPPLIED WITH THE LATHE FOR BOWL TURNING. AN OFFSET TOOL REST ATTACHMENT HELPS BRING THE TOOL REST IN ALIGNMENT WITH THE ROTATED HEADSTOCK FOR CONVENIENT BOWL TURNING ACCESS:
INCLUDES 12" TOOL REST, 6" FACEPLATE, SPUR CENTER, LIVE CENTER, FACE SHIELD, KNOCKOUT ROD AND INSTRUCTION MANUAL. NET WEIGHT - 183 LBS; SHIPPING WEIGHT - 210 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 3/4HP, 115V, 11A, 1PH. SPEED RANGE - VARIABLE FROM 500 TO 3,000 RPM. SWING OVER BED - 12" (8-3/4" OVER BASE). DISTANCE BETWEEN CENTERS - 34-1/2". HEADSTOCK SHAFT: 1"-8TPI, #2MT, 3/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2-1/4" TRAVEL, #2MT, 3/8" BORE. OVERALL DIMENSIONS - 44"H X 60"W X 17"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY SCROLL CHUCK - 959-585. ONEWAY TALON CHUCK - 959-627. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE DUPLICATOR - 140-069. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Machinery - Lathes
|
JET® 1442 LATHES
|
| Jet 1442vs Benchtop Lathe
...plus other(s)
|
THE JET® JWL-1442 LATHES HAVE A REEVES MECHANICALLY VARIABLE SPEED DRIVE WITH EIGHT INDIVIDUAL SPEED SETTINGS. THE HEADSTOCK MOVES ALONG THE BED AND ROTATES 360° WITH POSITIVE STOPS AT 45° AND 90° FOR CONVENIENT BOWL TURNING APPLICATIONS. AN OPTIONAL 20" BED EXTENSION INCREASES THE BETWEEN CENTERS DISTANCE TO 62". ALSO AVAILABLE IS AN OPTIONAL 57" BED EXTENSION W/LEG BRINGING THE BETWEEN CENTERS DISTANCE TO 99". THE JET 1442VS MODEL IS A BENCHTOP LATHE AND THE JET 1442VSK MODEL HAS A CAST IRON LEG SET:
LATHE INCLUDES 12" TOOL REST, 6" FACE PLATE, SPUR CENTER, LIVE CENTER, KNOCKOUT ROD, WRENCH AND INSTRUCTION MANUAL. NET WEIGHT - 190 LBS; SHIPPING WEIGHT - 210 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 1HP, 115/230VAC, 7.4/3.7A, 1PH. SPEED SETTINGS (8) - FROM 450 TO 3000 RPM. SWING OVER BED - 14" (10" OVER BASE). DISTANCE BETWEEN CENTERS - 42". HEADSTOCK SHAFT: 1"-8TPI, #2MT. INDEXING - 36 POINT. TAILSTOCK QUILL: 4" TRAVEL, #2MT, 3/8" BORE. OVERALL DIMENSIONS - 58"H X 50"W X 24"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY SCROLL CHUCK - 959-585. ONEWAY TALON CHUCK - 959-627. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE DUPLICATOR - 140-069. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Machinery - Lathes
|
JET® 1642 LATHES
|
| Jet 1642 Evs Lathe
...plus other(s)
|
THE JET® JWL-1642 LATHES USE A TWO-STEP, POLY V-BELT DRIVE TO PROVIDE TWO REVERSIBLE VARIABLE SPEED RANGES: 0-1,200 AND 0-3,200 RPM. THE MOVABLE HEADSTOCK CAN BE POSITIONED AT THE END OF THE BED AND USED FOR LARGER DIAMETER FREE-HANGING BOWL TURNING WHEN USING THE OPTIONAL OUTBOARD TURNING STAND. AN OPTIONAL FREE-HANGING 20" BED EXTENSION INCREASES THE BETWEEN CENTERS DISTANCE TO 62". ALSO AVAILABLE IS AN OPTIONAL 57" BED EXTENSION W/LEG BRINGING THE BETWEEN CENTERS DISTANCE TO 99". AVAILABLE IN 1-1/2HP AND 2HP MODELS:
LATHES INCLUDES 14" TOOL REST, 6" FACEPLATE, SPUR CENTER, LIVE CENTER, SAFETY SHIELD, TOOL BASKET, KNOCKOUT ROD AND INSTRUCTION MANUAL. ADDITIONAL FEATURES INCLUDE DIGITAL READOUT, TOOL STORAGE BASKET AND SHELF SUPPORT LIP CAST IN THE STAND TO ACCEPT 2X4 SHELVING. NET WEIGHT - 410 LBS; SHIPPING WEIGHT - 420 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
MODEL JWL-1642EVS PRO WOOD LATHE. MOTOR - 1-1/2HP, 230V, 4.6A, 3PH (REQUIRES 230V, 15A, 1PH CIRCUIT INPUT).
MODEL JWL-1642-2EVS PRO WOOD LATHE. MOTOR - 2HP, 230V, 4.6A, 3PH (REQUIRES 230V, 20A, 1PH CIRCUIT INPUT).
SPECIFICATIONS:
SPEED RANGES (2): 0-1,200 AND 0-3,200 RPM. SWING OVER BED - 16" (12" OVER BASE). DISTANCE BETWEEN CENTERS - 42". HEADSTOCK SHAFT: 1-1/4"-8TPI, #2MT. INDEXING - 36 POINT. TAILSTOCK QUILL: 4" TRAVEL, #2MT, 3/8" BORE. SPINDLE HEIGHT - 44-1/2". OVERALL DIMENSIONS - 50"H X 63-1/2"W X 20"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY STRONGHOLD CHUCK - 959-979. ONEWAY TALON CHUCK - 959-627. ONEWAY SCROLL CHUCK - 959-585. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE DUPLICATOR - 140-069. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Machinery - Lathes
|
ONEWAY 1640 LATHE
|
| Oneway 1640 Lathe, 1.5 Hp
...plus other(s)
|
AVAILABLE IN 1-1/2HP AND 2HP VARIABLE SPEED MODELS, THE ONEWAY 1640 LATHE IS A MID-SIZED LATHE GOOD FOR BOTH BOWL AND SPINDLE TURNING AND NOTED FOR ITS QUALITY AND PERFORMANCE. IT HAS A 16" SWING WITH 40" BETWEEN CENTERS THAT CAN BE INCREASED TO 64" WITH THE ADDITION OF THE OPTIONAL 24" BED EXTENSION. THE 24" BED EXTENSION CAN ALSO BE BOLTED TO THE OUTBOARD SIDE OF THE LATHE (SHOWN) PROVIDING A 24" SWING CAPACITY FOR LARGER OUTBOARD TURNING AND REQUIRING AN ACCESSORY 24" BANJO TOOLREST BASE AND TAILSTOCK RISER BLOCK FOR OPERATION:
SPINDLE HEIGHT SHOULD BE SPECIFIED WHEN ORDERING AND IS AVAILABLE IN 1" INCREMENTS FROM 42" TO 46" (INDUSTRY AVERAGE IS 45"). COMES WITH 14" STEEL TOOL REST, 4" FACEPLATE, #2MT DRIVE CENTER, #3MT LIVE CENTER, KNOCK OUT ROD AND OPERATION MANUAL. FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
SPECIFICATIONS:
MOTORS: 1-1/2HP AND 2HP, 230VAC, 1PH. SPEED RANGES (2): 14-700, 51-2,500 RPM. INBOARD SWING - 16" (12-1/2" OVER BASE). BETWEEN CENTERS - 40". OUTBOARD SWING 24". HEADSTOCK SHAFT: M33 X 3.5 THREADS, #2MT, 5/8" BORE. INDEXING - 48 POINT. TAILSTOCK QUILL: 4" TRAVEL, #3MT, 5/16" BORE. DIMENSIONS: 60"W X 31-1/4"D. NET/SHIPPING WTS: 600/650 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
FACEPLATES - 139-349. 3" SS FACEPLATES - 156-686. LIVE CENTERS - 882-896. SPUR CENTERS - 882-917. BOWL STEADY - 961-024. SPINDLE STEADY - 961-052. EASY CORE - 139-397. ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery - Lathes
|
ONEWAY 1224 LATHE
|
| 1224 Lathe, 1hp 110/220v
...plus other(s)
|
THE ONEWAY 1224 LATHE IS A HIGH QUALITY, SMALL TO MID CAPACITY LATHE BUILT TO THE SAME SPECS AND STURDY CONSTRUCTION AS ONEWAY'S LARGER LATHES. IT IS STACKED WITH FEATURES NORMALLY ASSOCIATED WITH LARGER MACHINES AND WAS DESIGNED FOR TURNERS WITH LIMITED SPACE WHO FOCUS ON SMALL TO MEDIUM SIZED WORK:
FEATURES 2-POSITION MOVEABLE CONTROL BOX WITH FULL-SPEED REVERSE. PATENTED 'BANJO' LOCKING TOOLREST BASE PROVIDES POSITIVE LOCKDOWN. OPTIONAL RFI FILTER ELIMINATES AM STATIC. OPTIONAL REMOTE ON/OFF SWITCH MAGNETICALLY ATTACHES TO ANY PART OF THE LATHE. OPTIONAL 24" BED EXTENSION PROVIDES ADDITIONAL CAPACITY. LATHE INCLUDES METAL STAND, TWO WOOD SHELVES, 11" STAINLESS STEEL TOOL REST, 3" FACEPLATE, DRIVE CENTER, LIVE CENTER, KNOCK OUT ROD AND OPERATION MANUAL. FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
SPECIFICATIONS:
MOTOR: 1HP, 110V/230VAC, 1PH. SPEED RANGES (2): 0-1,200 AND 0-4,500 RPM. INBOARD SWING - 12-1/2". BETWEEN CENTERS - 24". HEADSTOCK SHAFT: 1"-8TPI THREADS, #2MT, 7/16" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 3" TRAVEL, #2MT. BENCH HEIGHT - 30". SPINDLE HEIGHT 44-1/2". DIMENSIONS: 47"W X 23-1/2"D. NET/SHIPPING WTS - 300/360 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
FACEPLATES - 139-349. 3" SS FACEPLATES - 156-686. LIVE CENTERS - 882-896. SPUR CENTERS - 882-917. BOWL STEADY - 961-024. SPINDLE STEADY - 961-052. EASY CORE - 139-397. ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery - Lathes
|
WOODTEK® 10" MIDI LATHE
|
| Woodtek 10" Midi Lathe
...plus other(s)
|
FEATURING SOLID CAST IRON CONSTRUCTION AND SIX-SPEED DRIVE, THE WOODTEK® 10" MIDI LATHE WAS SPECIFICALLY DEVELOPED BY ENGINEERS AT WOODWORKER'S SUPPLY® FOR TURNERS WHO SPECIALIZE IN PENS AND PENCILS, CHESS PIECES, DUCK CALLS, CHRISTMAS ORNAMENTS AND OTHER SMALL TURNINGS. IT HAS THE SAME FEATURES AS OTHER 10" MIDI LATHES BUT AT AN AFFORDABLE PRICE. THIS MIDI LATHE JOINS THE WOODTEK® LINE OF LATHES INCLUDING THE WOODTEK® 12" WOOD LATHE AND THE WOODTEK® NO.1 WOOD LATHE™:
FEATURES POLY-V BELT DRIVE, SELF-EJECTING TAILSTOCK AND UPFRONT BELT TENSIONING WITH CONVENIENT SIDE ACCESS DOOR FOR FASTER SPEED CHANGES.LATHE INCLUDED 6" TOOL REST, 3-1/8" FACEPLATE, 4-PRONG SPUR CENTER, LIVE CENTER, CHROME HANDWHEELS, KNOCKOUT BAR AND INSTRUCTION MANUAL.NET WEIGHT - 87 LBS.; SHIPPING WEIGHT 115 LBS.ONE YEAR PARTS AND WORKMANSHIP WARRANTY.IMPORTED.
SPECIFICATIONS:
MOTOR - 1/2 HP, 115VAC, 5A, 1PH.SPEEDS (6) - 500, 840, 1,240, 1,800, 2,630, 3,975 RPM.SWING OVER BED - 10" (7-1/4" OVER BASE).DISTANCE BETWEEN CENTERS - 17".HEADSTOCK SHAFT: 1"-8TPI, #2MT, 3/8" BORE.TAILSTOCK QUILL: 2-3/8" TRAVEL, #2MT, 3/8" BORE.OVERALL DIMENSIONS - 14-3/4"H X 33-1/2"W X 9-1/2"D.NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE.EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS.CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HIGH SPEED STEEL TURNING TOOLS - 142-607.POWDER METAL TURNING TOOLS - 137-093.CARBON STEEL TURNING TOOLS - 873-826.ONEWAY TALON CHUCK - 959-627.NOVA G3 CHUCK - 962-546.VEGA MIDI LATHE DUPLICATOR - 139-424.
|
|
|
|
Machinery - Lathes
|
NOVA DVR XP LATHE
|
| Nova Dvr Xp 16" Benchtop Lathe
...plus other(s)
|
THE NOVA DVR XP™ WOOD LATHE HAS A DIGITAL VARIABLE RELUCTANCE (DVR) MOTOR BUILT INTO THE HEADSTOCK. THIS DIRECTLY DRIVES THE LATHE SPINDLE PRODUCING HIGHER TORQUE WITH A MINIMUM LOSS OF POWER. THE LATHE IS PRE-WIRED FOR 120V BUT CAN BE EASILY WIRED TO 240V FOR AN ADDITIONAL BOOST IN POWER. A TOUCH-PAD MICROCOMPUTER WITH DIGITAL DISPLAY CONTROLS SPEEDS, FORWARD/REVERSE AND FIVE PRE-PROGRAMMABLE TURNING SPEEDS. THE PIVOTING HEADSTOCK ROTATES 360° WITH SWIVEL LOCKS AT 22-1/2°, 45°, 90° AND 315°. AN OPTIONAL OUTBOARD TURNING ASSEMBLY INCREASES TURNING CAPACITY WHILE PROVIDING ERGONOMIC COMFORT. SHOWN WITH OPTIONAL STAND AND OUTBOARD TOOL REST ASSEMBLY:
LATHE INCLUDES 12" TOOL REST, 3" FACEPLATE, SPUR DRIVE, LIVE CENTER, HAND WHEEL AND INSTRUCTION MANUAL (CAST IRON STAND AND OUTBOARD ASSEMBLY ARE OPTIONAL). OPTIONAL 20" BED EXTENSION INCREASES BETWEEN CENTERS DISTANCE TO 44". NET WEIGHT - 181 LBS, SHIPPING WEIGHT - 190 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1-3/4HP, 115VAC, 15A, 1PH (2HP, 230VAC, 20A). SPEED RANGE - 100 TO 3,500 RPM IN 5 RPM INCREMENTS. SWING OVER BED - 16". OUTBOARD SWING - 29". DISTANCE BETWEEN CENTERS - 24". HEADSTOCK SHAFT - 1-1/4"-8TPI, #2MT, 9/16" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL - 3-1/4" TRAVEL, #2MT, 9/16" BORE. OVERALL DIMENSIONS - 16-1/4"H X 43-1/2"W X 9-1/2"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
NOVA PRECISION MIDI CHUCKS - 136-802. NOVA G3 CHUCKS - 962-546. SUPERNOVA2 CHUCKS - 961-892.
|
|
|
|
Machinery - Lathes
|
ONEWAY 1236SD LATHE
|
| Oneway 1236sd 1hp 110v Lathe
...plus other(s)
|
FOR THOSE WITH PHYSICAL OR AGE RELATED ISSUES, SITTING DOWN WHILE TURNING, SANDING AND FINISHING CAN BE A REAL COMFORT. THE INNOVATIVE ONEWAY 1236SD LATHE OFFERS THE OPTION OF FLIPPING THE BED DOWN ON ITS SIDE SO IT CAN BE USED WHILE SITTING DOWN. THE TOOLREST AND TAILSTOCK ARE DESIGNED TO RUN SMOOTHLY ON THEIR SIDE ALONG TUBULAR BEDWAYS FOR EASY MOVEMENT AND HANDLING. THE MOTOR HAS FULL SPEED REVERSE AND THE ON/OFF SWITCH AND SPEED CONTROLS ARE BUILT INTO A REMOTE CONTROL UNIT THAT WILL MAGNETICALLY ATTACH ANYWHERE TO THE LATHE FOR CONVENIENT ACCESS:
COMES IN 120V AND 230V MODELS. LATHE INCLUDES 6" TOOL REST, 9" TOOL REST, 3" FACEPLATE, #2MT SAFE DRIVER, #2MT LIVE CENTER, KNOCK OUT ROD, LEVELING PADS AND SPINDLE LOCK WRENCH. FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
SPECIFICATIONS:
MOTORS: 1HP, 110V/220V, 1PH. SPEED RANGES (2): 0-2,000, 0-4,000 RPM. INBOARD SWING - 12" (9" OVER BASE). BETWEEN CENTERS - 36". HEADSTOCK SHAFT: 1"-8TPI THREADS, #2MT, 7/16" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 3" TRAVEL, #2MT. DIMENSIONS - 60"W X 28"D. NET/SHIPPING WTS - 450/500 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
FACEPLATES - 139-349. 3" SS FACEPLATES - 156-686. LIVE CENTERS - 882-896. SPUR CENTERS - 882-917. ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery - Lathes
|
JET® 1220 LATHES
|
| Jwl-1220 6-speed Mini Lathe
...plus other(s)
|
THE JET® JML-1220 LATHES ADD CAPACITY AND POWER TO THE COMPANY'S TRADITIONAL JML-SERIES OF SMALL LATHES. THEY COME IN SIX-SPEED AND VARIABLE SPEED MODELS WITH SPEEDS UP TO 4000 RPM. THESE MIDI SIZED LATHES MAKE TURNING SMALL BOWLS PRACTICAL ON A MIDI SIZED LATHE:
ALL CAST IRON CONSTRUCTION WITH NON-SKID RUBBER FEET. OPTIONAL 28" BED EXTENSION EXPANDS DISTANCE BETWEEN CENTERS TO 48". OPTIONAL LATHE STAND AND STAND EXTENSION ADD VERSATILITY. LATHE INCLUDES 6" AND 10" TOOL RESTS, 3" FACE PLATE, SPUR CENTER, LIVE CENTER, CARRYING HANDLE, WORK LAMP, KNOCKOUT ROD AND INSTRUCTION MANUAL. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
JET® JML-1220 LATHE. MOTOR: 3/4 HP, 115VAC, 4.5A, 1PH. SIX SPEEDS: 500, 840, 1240, 1,800, 2,630, 3,975 RPM. NET WEIGHT - 98 LBS; SHIPPING WEIGHT ? 108 LBS. OVERALL DIMENSIONS - 15-1/2"H X 32"W X 12"D.
JET® JML-1220VS LATHE. MOTOR: 3/4 HP, 115VAC, 4.5A, 1PH. VARIABLE SPEED RANGE - 270 TO 4,200 RPM. NET WEIGHT - 125 LBS; SHIPPING WEIGHT ? 130 LBS. OVERALL DIMENSIONS - 15-1/2"H X 39"W X 11"D.
SPECIFICATIONS:
SWING OVER BED - 12" (9-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 20". HEADSTOCK SHAFT: 1"-8TPI, #2MT, 3/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2" TRAVEL, #2MT, 3/8" BORE. SPINDLE HEIGHT - 43" TO 45" WITH ADJUSTABLE STAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HIGH SPEED STEEL TURNING TOOLS - 142-607. POWDER METAL TURNING TOOLS - 137-093. CARBON STEEL TURNING TOOLS - 873-826. ONEWAY TALON CHUCK - 959-627. NOVA G3 CHUCK - 962-546. WOODCUT BOWL SAVER - 140-504. VEGA MIDI LATHE DUPLICATOR - 139-424.
|
|
|
|
Machinery - Lathes
|
GENERAL® MAXI-LATHE VS+
|
| 12" Maxi Lathe Vs+
...plus other(s)
|
GENERAL INTERNATIONAL® PULLED OUT ALL THE STOPS WITH THE MODEL 25-200 M1 MAXI LATHE VS+. IT HAS A 12" SWING, A 360° PIVOTING HEADSTOCK AND A 3/4 HP HIGH-TORQUE DC MOTOR WITH THREE SPEED RANGES FOR BOWL TURNING AND HIGH SPEED SPINDLE WORK. THIS ROCK-SOLID LITTLE LATHE IS 50% HEAVIER THAN OTHER MIDI LATHES IN THE SAME CATEGORY COMING IN AT 146 LBS. IT COMES WITH A SHORT OUTBOARD BED AND A TOOL REST POST EXTENSION FOR TURNING OPEN BOWLS AND PLATES UP TO 19" DIAMETER ON THE OUTBOARD SIDE. AN OPTIONAL 32" BED EXTENSION IS AVAILABLE FOR LONGER WORK EXPANDING THE DISTANCE BETWEEN CENTERS TO 49":
ALL CAST IRON CONSTRUCTION. DIGITAL READOUT PROVIDES QUICK SPINDLE SPEED DISPLAY. HEADSTOCK HAS SPINDLE LOCK AND 36-POINT INDEXING. PIVOTING HEADSTOCK ROTATES 360° WITH POSITIVE STOP AT 180°. QUICK RELEASE LEVER ACCOMMODATES EFFICIENT BELT CHANGING. OPTIONAL LATHE STAND ADDS VERSATILITY. LATHE INCLUDES: 3" FACEPLATE, SPUR CENTER, LIVE CENTER, KNOCKOUT ROD, SAFETY GLASSES, TOOL REST POST EXTENSION, OUTBOARD BED AND INSTRUCTION MANUAL. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 3/4 HP, 110VDC, 2400 RPM, 6A. VARIABLE SPEED RANGES (3): 300-900, 600-1800, 1200-3600. SWING OVER BED - 12" (9-1/4" OVER BASE). SWING OVER OUTBOARD BED - 19-1/4" (16-5/8" OVER BASE). DISTANCE BETWEEN CENTERS - 17-1/4" (32" W/BED EXTENSION). HEADSTOCK SHAFT: 1"-8TPI, #2MT, 3/8" BORE. INDEXING - 36 POINT. TAILSTOCK QUILL: 2-1/8" TRAVEL, #2MT, 3/8" BORE. NET WEIGHT - 146 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
GENERAL MINI LATHE DUPLICATOR - 157-595. ONEWAY TALON CHUCK - 959-634. NOVA G3 CHUCK - 962-560. HIGH SPEED STEEL TURNING TOOLS - 142-607. POWDER METAL TURNING TOOLS - 137-093. LATHE ACCESSORIES. TURNING TOOLS.
|
|
|
|
Machinery - Lathes
|
NOVA DVR 2024 LATHE
|
| Nova Dvr 2024 Lathe
...plus other(s)
|
THE NEW NOVA DVR 2024 LATHE ADDS TO THE POPULAR DVR LINE WITH 2 HORSEPOWER, A 20" SWING AND A WIRELESS REMOTE CONTROL. THE TOUCH-PAD SPEED CONTROLS HAVE TEN PRE-PROGRAMMABLE TURNING SPEEDS AND A VARIABLE SPEED RANGE FROM 100 TO 5000 RPM. AN ON/OFF/SPEED WIRELESS REMOTE COMES STANDARD AND CAN BE WORN ON YOUR WRIST OR MAGNETICALLY ATTACHED ANYWHERE ON THE LATHE. THE HEADSTOCK PIVOTS 360° WITH SWIVEL LOCKS AT 22-1/2°, 45° AND 90°. THIS IS USED IN CONJUNCTION WITH THE OPTIONAL 2024 OUTRIGGER UNIT TO INCREASE THE SWING CAPACITY ON THE SIDE OF THE LATHE TO 33" FOR FREE HANGING BOWL TURNING:
OPTIONAL 20" BED EXTENSION INCREASES BETWEEN CENTERS DISTANCE TO 44". OPTIONAL SWING AWAY HINGE ATTACHES TO THE END OF THE BED TO CONVENIENTLY MOVE TAILSTOCK ASIDE. LATHE INCLUDES CAST IRON STAND, 12" TOOL REST, 3" FACEPLATE, SPUR DRIVE, LIVE CENTER, HAND WHEEL, WIRELESS REMOTE AND INSTRUCTION MANUAL. NET WEIGHT - 315 LBS, SHIPPING WEIGHT - 340 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 2HP, 230VAC, 1PH. VARIABLE SPEED RANGE - 100 TO 5,000 RPM. SWING OVER BED - 20". OUTRIGGER SWING - 33". DISTANCE BETWEEN CENTERS - 24". HEADSTOCK SHAFT - 1-1/4"-8TPI, #2MT, 15MM BORE. INDEXING - 24 POINT. TAILSTOCK QUILL - 3-1/4" TRAVEL, #2MT, 15MM BORE. OVERALL DIMENSIONS - 50"H X 40-3/4"W X 25"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
TITAN2 CHUCKS - 162-536. SUPERNOVA2 CHUCKS - 961-892. NOVA G3 CHUCKS - 962-546.
|
|
|
Click for More Info
|
Machinery - Lathes
|
NOVA™ COMET II MIDI LATHE
|
| Comet Ii Midi Lathe
...plus other(s)
|
POWERFUL ENOUGH FOR SMALL BOWLS, THE NOVA™ COMET II MIDI LATHE HAS A 12" SWING AND A 3/4" HP MOTOR WITH THREE SPEED RANGES FROM 250-4000 RPM. THIS UNIQUE LITTLE MACHINE STARTS A NEW TREND IN ACCESSORIZING WITH THE NOVA™ VERSATURN™ ADAPTER THAT CONNECTS THE OUTBOARD SPINDLE TO A NUMBER OF WOODWORKING ACCESSORIES INCLUDING A 8" WHETSTONE GRINDER, 4" X 36" BELT SANDER, FLEXIBLE SHAFT CARVING TOOL, 6" X 3/4" GRINDING WHEEL, 6" DISK SANDER AND A 6" X 1" WIRE WHEEL:
OPTIONAL 24-1/2" BED EXTENSION EXPANDS DISTANCE BETWEEN CENTERS TO 41". FORWARD/REVERSE DRIVE ACCOMMODATES THE NOVATM G3 REVERSIBLE CHUCK. LATHE INCLUDES 3" FACEPLATE, 6" TOOLREST, SPUR DRIVE, LIVE CENTER, KNOCKOUT ROD, HANDWHEEL AND INSTRUCTION MANUAL. FIVE YEAR MANUFACTURER'S WARRANTY (ONE YEAR ON MOTOR). IMPORTED.
SPECIFICATIONS:
MOTOR: 3/4 HP, 120VDC, 60HZ (110VAC, 15A INPUT). SPEED RANGES (3): 250-680, 530-1420, 1380-4000 RPM. INBOARD SWING - 12" (9-1/2" OVER BASE). BETWEEN CENTERS - 16-1/2" (41" W/24-1/2" BED EXTENSION). HEADSTOCK SHAFT: 1"-8TPI, #2MT, 3/8" (10MM) BORE. TAILSTOCK QUILL: 2.5" TRAVEL, #2MT, 3/8" (10MM) BORE. NET/SHIPPING WEIGHTS - 77/88 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
NOVA G3 CHUCK - 962-546. NOVA PRECISION MIDI CHUCK - 136-799.
|
|
|
|
Machinery - Lathes
|
ONEWAY 20" AND 24" LATHES
|
| Oneway 2436 Lathe, 1.5hp
...plus other(s)
|
PROFESSIONAL QUALITY ONEWAY 20" AND 24" LATHES COME IN A RANGE OF SIZES AND FEATURES THAT WILL MEET THE NEEDS OF SMALL WORKSHOPS, SCHOOLS AND PROFESSIONAL TURNING OPERATIONS. THERE ARE FOUR BASIC MODELS TO CHOOSE FROM: 2016 AND 2036, 2416 AND 2436. THE FIRST TWO NUMERALS IN THE MODEL NUMBER INDICATE THE SWING OVER BED IN INCHES AND THE LAST TWO NUMBERS INDICATE THE DISTANCE BETWEEN CENTERS. THERE ARE THREE MOTOR DRIVE SYSTEMS TO CHOOSE FROM: 1-1/2, 2 AND 3 HP. EACH DRIVE SYSTEM HAS THREE SPEED RANGES: 70-700, 190-1,900 AND 300-3,000 RPM. A COMPLETE LINE OF LATHE ACCESSORIES ARE AVAILABLE INCLUDING BED EXTENSIONS, OUTBOARD TURNING ATTACHMENT, EXHAUST HOOD AND STAINLESS STEEL BEDWAYS:
SPINDLE HEIGHT TO FLOOR DISTANCE SHOULD BE SPECIFIED WHEN ORDERING (INDUSTRY AVERAGE IS 44" TO 45"). FOR 20" SWING LATHES SELECT 41", 42", 44" OR 46". FOR 24" SWING LATHES SELECT 43", 44", 46" OR 48". OPTIONAL BRAKING RESISTOR SHOULD BE ORDERED AT TIME OF PURCHASE TO AVOID EXPENSIVE RETROFIT (RECOMMENDED FOR LARGE LATHE MODELS). OPTIONAL STAINLESS STEEL BEDWAYS MUST BE SPECIFIED WHEN ORDERING (RECOMMENDED FOR WET TURNING CONDITIONS). OPTIONAL WHEEL SET AND DUST HOOD ADD CONVENIENCE AND VERSATILITY. OPTIONAL 60" BED EXTENSION INCLUDES BED SUPPORT. OPTIONAL 20" AND 32" OUTBOARD BEDS INCLUDE LEG SUPPORTS. OPTIONAL 20" AND 32" OUTBOARD ATTACHMENTS COMPLETE INCLUDE OUTBOARD BED W/LEGS, OUTBOARD BANJO TOOLREST BASE AND 18" OUTBOARD TOOL REST. PATENTED SLIDING-CAM "BANJO" TOOL REST BASES HAVE FLEX-FREE POSITIVE LOCKDOWN. MOTOR HAS POLY-V BELT DRIVE WITH FULL SPEED REVERSE FOR OUTBOARD TURNING AND REVERSE SANDING OPERATIONS. LATHE INCLUDES 14" TOOL REST, 6" FACEPLATE, #2MT DRIVE CENTER, #3MT LIVE CENTER, KNOCK OUT ROD AND INSTRUCTION MANUAL. NET WEIGHT (APPROX): 2436 - 850 LBS; 2416 - 800 LBS; 2036 - 650 LBS; 2016 - 600 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
SPECIFICATIONS:
MOTORS: 1-1/2, 2 AND 3HP, 230VAC, 1PH. SPEED RANGES (3): 70-700, 190-1,900 AND 305-3,050 RPM. HEADSTOCK SHAFT: M33 X 3.5 THREADS, #2MT, 5/8" BORE. INDEXING - 48 POINT. TAILSTOCK QUILL: 4" TRAVEL, #3MT, 5/16" BORE. FOOTPRINT: 2436/2036 - 60" X 31"; 2416/2016 - 40" X 31".
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
FACEPLATES - 139-349. LIVE CENTERS - 882-896. SPUR CENTERS - 882-917. STEADY RESTS - 961-024. EASY CORE - 139-397. DUST HOOD - 150-812. TAILSTOCK SWINGER™ - 150-806. ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979. SPINDLE ADAPTERS - 150-842.
|
|
|
|
Machinery - Lathes
|
DELTA® 12" MIDI-LATHES
|
| Delta 12" 5-spd Midi Lathe, 3/4hp
...plus other(s)
|
DESIGNED FOR TURNING BOWLS AS WELL AS PENS, SPINDLES AND BOXES, THE NEW DELTA® 12" MIDI-LATHES NOW HAVE ENOUGH THE HORSEPOWER, SWING AND BELT GRIP FOR MOST TYPES OF WOODTURNING. TWO MODELS ARE AVAILABLE: 3/4HP, 5-SPEED MODEL 46-455 AND THE 1HP, VARIABLE SPEED MODEL 46-460. THESE ARE THE FIRST MIDI LATHES TO OFFER BOTH FORWARD AND REVERSE DRIVE ROTATIONS THROUGH A REVERSIBLE DC DRIVE. FEATURES INCLUDE ALL CAST IRON CONSTRUCTION, 6-GROOVE POLY-V BELT DRIVE, LOCKING FACEPLATE FOR REVERSE SANDING OPERATIONS AND A PATENTED QUICK-CHANGE BELT TENSIONING SYSTEM:
LATHE INCLUDES 6" AND 10" TOOL RESTS, 3" FACE PLATE, SPUR DRIVE, LIVE CENTER, KNOCKOUT ROD, FACEPLATE WRENCH AND INSTRUCTION MANUAL. OPTIONAL 25-1/2" BED EXTENSION BRINGS DISTANCE BETWEEN CENTERS TO 42". TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
DELTA® 46-455 LATHE. MOTOR: 3/4 HP, 115VAC, 1PH. FIVE SPEEDS: 500, 950, 1240, 1,550, 2,700, 4,000 RPM.
DELTA® 46-460 LATHE. MOTOR: 1 HP, 115VAC, 1PH. VARIABLE SPEED RANGES (3): 250-700, 600-1,800, 1,350-4,000.
SPECIFICATIONS:
SWING OVER BED - 12-1/2" (9-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 16-1/2" (42" W/BED EXTENSION). HEADSTOCK SHAFT: 1"-8TPI, #2MT, 15/32" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2-1/4" TRAVEL, #2MT, 13/32" BORE. NET WEIGHT - 97 LBS. OVERALL DIMENSIONS - 36"W X 11"D X 17-3/4"H.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
DELTA LIVE CENTER SYSTEM - 46-490. HIGH SPEED STEEL TURNING TOOLS - 142-607. POWDER METAL TURNING TOOLS - 137-093. CARBON STEEL TURNING TOOLS - 873-826. ONEWAY TALON CHUCK - 959-627. NOVA G3 CHUCK - 962-546. WOODCUT BOWL SAVER - 140-504. VEGA MIDI LATHE DUPLICATOR - 139-424.
|
|
|
|
Machinery - Lathes
|
WOODTEK MIDI LATHE AND MICRO TOOL SET
|
| Woodtek Midi Lathe And Micro Tool Set
|
IDEAL FOR SMALL PROJECTS AND FINE DETAIL WORK, THE DELTA® 5-PIECE MICRO WOODTURNING TOOL SET COMES WITH A 1/4" ROUGHING OUT GOUGE, 1/8" SPINDLE GOUGE, 1/4" ROUND NOSE SCRAPER, 1/4" SKEW CHISEL AND 1/16" PARTING TOOL. EACH TOOL IS 10" LONG OVERALL:
PRECISION GROUND CUTTING EDGES. HARDWOOD HANDLES WITH BRASS FERRULES. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Lathes
|
WOODTEK 12" VARIABLE SPEED WOOD LATHE
|
| Woodtek 12" Vs Lathe W/safety Shield
...plus other(s)
|
|
SET - WOODTEK 12"" VS LATHE W/SAFELY SHIELD LATHE SHIELD
|
|
|
|
Advanced Search Tools
Browse
