|
|
|
Abrasives - Accessories/hand Sanding
|
5" AND 6" FLEX HAND SANDING PADS
|
| 5" H&l Flex Pad, 3/8" Thick
...plus other(s)
|
FLEX HAND SANDING PADS ARE GREAT FOR CONTOUR SANDING ON FURNITURE, WOODTURNINGS AND WHEREVER CURVED AND IRREGULAR SHAPES ARE HARD TO SAND. THESE H&L SPONGE PADS SAVE YOUR FINGERPRINTS WHILE ENSURING CONSISTENT SURFACES AND LONGER LASTING SANDPAPER:
ELASTIC STRAP SECURELY HOLDS PAD TO HAND. CAN BE USED WITH ANY H&L SANDPAPER AND ABRASIVE PADS. USE 1/8" PAD FOR TIGHTER CURVES AND SMALL DIAMETER SPINDLES. USE 3/8" PAD FOR LARGER CURVES, BOWLS AND FLAT SANDING OPERATIONS. INTERFACE PADS ADD ADDITIONAL CUSHIONING AND FLEXIBILITY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
C-WEIGHT H&L PAPER BACKED DISCS - 132-674. F-WEIGHT H&L CLOTH BACKED DISCS - 949-846. J-WEIGHT H&L CLOTH BACKED DISCS - 131-387. NYLON H&L ABRASIVE PADS - 912-776. MICRO H&L SANDING DISCS - 949-373. MICRO-MESH H&L SANDING DISCS - 125-315. ABRALON H&L SANDING PADS - 928-165. LAMBS WOOL H&L BUFFING PADS - 143-186.
|
|
|
|
Abrasives - Accessories/hand Sanding
|
A&H ABRASIVESTM ABRASIVE FINISHING SPONGES
|
| Soft Hand Pad-very Fine
...plus other(s)
|
DURING THE WET SANDING PROCESS, ABRASIVE FINISHING SPONGES HEAT DANISH OIL APPLIED TO THE WOOD'S SURFACE, TURNING IT INTO A "GRAVY" THAT SOAKS IN, FILLS THE GRAIN AND LEAVES A BEAUTIFUL SHEEN DURING THE WET SANDING PROCESS, ABRASIVE FINISHING SPONGES HEAT DANISH OIL APPLIED TO THE WOOD'S SURFACE, TURNING IT INTO A "GRAVY" THAT SOAKS IN, FILLS THE GRAIN AND LEAVES A BEAUTIFUL SHEEN:
SOLD IN PACKAGES OF 10 AND AVAILABLE IN FIVE GRITS TO MEET YOUR SPECIFIC REQUIREMENTS: COARSE (36-80); MEDIUM (80-120); FINE (120-180); VERY FINE (180-220); AND SUPER FINE (220-400). 1/2" X 3-3/4" X 4-3/4". CLEAN WITH MINERAL SPIRITS TO REUSE.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
J.E. MOSER'S® DANISH OIL - 859-973.
|
|
|
|
Abrasives - Misc/other
|
NYALOX® BRUSHES
|
| 4"x1/4" Nyalox 80 Grit Flap Brush
...plus other(s)
|
AS THE RESULT OF GRIT-IMPREGNATED NYLON BRISTLES, NYALOX ABRASIVE BRUSHES WILL NOT RUST AND WILL LAST UP TO 5 TIMES LONGER THAN WIRE BRUSHES:
REMOVE OLD PAINT AND FINISHES FROM WOOD, CLEAN AND SAND WOOD TURNINGS, RAILINGS, BANISTERS, TRIM AND MOLDING OR PREPARE PLASTIC, FIBERGLASS AND RUBBER SURFACES FOR ADHESIVES. BRISTLES REMOVE MATERIAL FROM CRACKS AND CREVICES WITHOUT AFFECTING CONTOUR SURFACES. 4" DIA. WHEELS HAVE 7/8" WIDE FACES AND 1/4" SHANKS - USE WITH DRILL MOTOR OR FLEX SHAFT (2,500 MAXIMUM RPM). COLOR-CODED FOR EASY IDENTIFICATION - GRAY (80 GRIT), ORANGE (120 GRIT), BLUE (240 GRIT). USA..
|
|
|
|
Adhesives - Instant
|
TITEBOND INSTANT BOND IS FORMULATED TO BOND WOOD IN SECONDS
|
| Instant Bond Ca Thin
...plus other(s)
|
TITEBOND INSTANT BOND IS A TWO-PART BONDING SYSTEM THAT TAKES BETWEEN 5 - 15 SECONDS TO SET AND 30 - 60 SECONDS FOR INITIAL CURE. IT PROVIDES A STRONG, PERMANENT BOND AND IS IDEAL FOR HARD TO REACH JOINTS OR SURFACE AREAS THAT ARE DIFFICULT TO CLAMP. DESIGNED PRIMARILY FOR WOOD AND WOOD PRODUCTS, THIS ADHESIVE IS ALSO VERY EFFECTIVE ON A WIDE VARIETY OF MATERIALS AND SUBSTRATES.
THE THIN VISCOSITY PRODUCT OFFERS THE FASTEST ASSEMBLY TIME OF 5 SECONDS AND AN INITIAL CURE SPEED OF 3 SECONDS. IT IS IDEAL FOR REPAIRING HAIR LINE CRACKS AND SMALL DEFECTS IN WOOD, AS WELL AS REPAIRING LOOSE VENEER EDGES. IT CAN ALSO BE USED AS A FINISH. THE MEDIUM VISCOSITY PRODUCT OFFERS AN ASSEMBLY TIME OF 7 SECONDS AND AN INITIAL CURE SPEED OF 5 SECONDS. IN ADDITION TO TYPICAL BONDING APPLICATIONS, IT IS IDEAL FOR FILLING KNOTS AND VOIDS IN WOOD, ADHERING PEN TUBES TO BLANKS FOR PEN TURNING APPLICATIONS, AND FOR SOAKING END-GRAIN TO PREVENT SPLITTING. THE THICK VISCOSITY PRODUCT OFFERS AN ASSEMBLY TIME OF 10 SECONDS AND AN INITIAL CURE SPEED OF 8 SECONDS. IT IS IDEAL FOR BONDING END-GRAIN IN A MITER JOINT APPLICATION, QUICK ASSEMBLY OF JIGS AND FIXTURES, ADHERING TURNING BLOCKS TO SCRAP BLOCKS ON A FACEPLATE FOR IMMEDIATE USE. THE GEL VISCOSITY PRODUCT OFFERS THE LONGEST ASSEMBLY TIME OF 30 SECONDS AND AN INITIAL CURE SPEED OF 20 SECONDS. IT IS IDEAL FOR GAP-FILLING APPLICATIONS, GLUING POROUS AND ODD-SHAPED SURFACES AND VARIOUS CABINET MAKING APPLICATIONS, SUCH AS PRE-BONDING MOLDINGS. THE ACTIVATOR IS ESPECIALLY EFFECTIVE FOR APPLICATIONS INVOLVING LARGE GAPS, VERY POROUS WOOD, ACIDIC SURFACES OR IN LOW HUMIDITY CONDITIONS. IT IS A HEPTANE-BASED SOLVENT THAT WILL NOT MAR FINISHES OR DAMAGE PLASTICS. APPLY TO OPPOSITE SURFACE BEFORE ASSEMBLY FOR EXTREMELY FAST CURING OF ALL VISCOSITY TYPES OF INSTANT BOND.
|
|
|
|
Adhesives - Instant
|
J. E. MOSER'S® LOW ODOR LIGHTNING BOND™ MAKES USING INSTANT GLUES MORE ENJOYABLE
|
| Low Odor Thin Lightning Bond-1oz.
...plus other(s)
|
ODOR LEVELS HAVE BEEN DRAMATICALLY REDUCED MAKING LOW ODOR LIGHTNING BOND™ MUCH MORE COMFORTABLE TO USE INDOORS BY MANY CRAFTSMEN WHO ARE SENSITIVE TO NORMAL CA GLUE FUMES. I ALSO NOTICE THAT MY EYES DON'T STING WHEN WORKING WITH THIS INSTANT GLUE. LOW ODOR LIGHTNING BOND™ SUPER GLUE IS IDEAL FOR QUICKLY ADHERING SURFACES WITHOUT CLAMPING AND REPAIRING CRACKS QUICKLY - A TREMENDOUS TIME SAVER. IT IS ALSO VERY USEFUL FOR FINISHING SMALL TURNINGS ON THE LATHE. THIS GLUE IS FORMULATED FOR ADHERING WOOD BUT WILL BOND VIRTUALLY ANYTHING INCLUDING CLOTH, GLASS, LEATHER, PAPER, METAL, MOST PLASTICS, STONE, WOOD, ETC. IT WILL NOT BOND TEFLON®, HIGH-DENSITY POLYETHYLENE OR POLYPROPYLENE ON IT'S OWN. WORKS BEST ON TIGHT FITTING JOINTS, BUT MANY LOOSE FITTING JOINTS CAN ALSO BE SUCCESSFULLY BONDED USING THE THICK. WORKING TIMES VARY BUT AVERAGE AROUND 30 SECONDS FOR THE THIN VISCOSITY WHEN APPLIED TO SNUG FITTING JOINTS. MEDIUM AND THICK VISCOSITY INSTANT GLUES HAVE SLIGHTLY LONGER TACK TIMES. ADD LIGHTNING ACTIVATOR TO GREATLY REDUCE TACK-UP TIME OF ALL VISCOSITIES. PLEASE ALLOW ALL CYANOACRYLATE(CA) INSTANT, SUPER GLUES APPROXIMATELY 24 HOURS TO FULLY CURE FOR MAXIMUM STRENGTH.
THIN VISCOSITY FOR REPAIRING HAIRLINE CRACKS AND FINISHING. MEDIUM VISCOSITY HIGHER VISCOSITY, GAP FILLING. THICK VISCOSITY EXTRA THICK, GAP FILLING. ACTIVATOR ACCELERATES ANY INSTANT GLUE TO MAKE IT TRULY "INSTANT". DEBONDER REMOVES GLUE FROM HANDS, TOOLS. USA.
|
|
|
|
Books
|
TURNING WOOD WITH RICHARD RAFFAN
|
| Turning Wood
|
COMPLETELY REVISED AND UPDATED, TURNING WOOD WITH RICHARD RAFFAN© PROVIDES A COMPLETE OVERVIEW OF WOOD TURNING. IN IT, THE WORLD'S PRE-EMINENT WOODTURNING TEACHER PROVIDES ADVICE ABOUT:
CHOOSING THE PROPER CHUCKS AND TOOLS FOR THE JOB. SHARPENING AND MAINTAINING TOOLS FOR BEST RESULTS. HANDLING TOOLS SAFELY AND EFFICIENTLY. LEARNING BASIC TECHNIQUES WITH EASE.
SOFTCOVER. 202 PAGES, 355 COLOR PHOTOS AND 69 DRAWINGS.
|
|
|
|
Books
|
TURNING BOWLS WITH RICHARD RAFFAN
|
| Turning Bowls W/raffan
|
TURNING BOWLS WITH RICHARD RAFFAN© IS A FULL-LENGTH STUDY OF BOWL TURNING. IN IT, THE WORLD'S PRE-EMINENT WOODTURNING TEACHER PROVIDES:
THOROUGH COVERAGE OF TOOLS, WOOD SELECTION AND DESIGN. ADVICE ON HOW TO AVOID AND SOLVE COMMON TURNING PROBLEMS. INFORMATION THAT RANGES FROM THE BASIC TO THE ADVANCED. EXPERT-LEVEL INSTRUCTION IN AN EASY-TO-UNDERSTAND FORMAT.
SOFTCOVER. 186 PAGES, 305 COLOR PHOTOS AND 41 DRAWINGS.
|
|
|
|
Books
|
CHRIS CHILD'S PROJECTS FOR WOODTURNERS
|
| Projects For Woodturners
|
|
MASTER TRADITIONAL WOODTURNING TECHNIQUES WHILE MAKING A SERIES OF BEAUTIFUL AND PRACTICAL PROJECTS. COLLECTED FROM THE PAGES OF THE POPULAR WOODTURNING MAGAZINE, HERE ARE MORE THAN 20 PROJECTS THAT CAN ALL BE DONE ON A BASIC LATHE USING STANDARD TOOLS AND EQUIPMENT BY TURNERS WITH LITTLE PRIOR EXPERIENCE. GENEROUSLY ILLUSTRATED IN FULL-COLOR, THE INSTRUCTIONS ARE FREE OF TECHNICAL JARGON AND ARE FILLED WITH HELPFUDL GUIDANCE FROM THE AUTHOR, A NOTED WOODTURNER AND TEACHER. MOST OF THE PROJECTS CAN BE COMPLETED IN ONE DAY, SOME IN ONLY A FEW HOURS. MAKE A SIMPLE YET ELEGANT FRUIT BOWL OR BASIC LIDDED BOX. PRACTICE YOUR SPINDLE-TURNING SKILLS BY MAKING A MUG TREE. USE A THREADED JOINT TO MAKE A STAND FOR SEWING SUPPLIES. TURN A PAIR OF GORGEOUS CANDLESTICKS, MATCHING SALT AND PEPPER MILLS, A SPICE RACK, A TRIPOD TABLE, A LAMP, A HAND MIRROR, AND MORE. 128 PAGES, PAPERBACK.
|
|
|
|
Books
|
TURNING GREEN WOOD
|
| Turning Green Wood
|
|
GREEN WOODTURNING--TURNING FRESH LUMBER STRAIGHT FROM THE LOG--BRINGS THE CRAFTSMAN IN CONTACT WITH THE LIVING, GROWING TREE, AND REVEALS ITS SPECIAL WARMTH, DURABILITY, COLOR, AND GRAIN PATTERNS. ABOVE ALL, WITH GREEN WOOD IT'S POSSIBLE TO PRODUCE BOWLS AND GOBLETS OF SUCH DELICACY THAT THEY APPEAR TRANSLUCENT. AIDED BY SPECTACULAR PHOTOGRAPHS, A FOREMOST EXPONENT OF THE STYLE TELLS HOW TO HARVEST AND STORE GREEN WOOD; EXPLAINS ALL THE INTRICACIES OF TOOLS AND TECHNIQUES; HELPS YOU ANTICIPATE THE NATURAL CHANGES GREEN WOOD UNDERGOES AS IT DRIES; AND REVEALS THE MYSTERIES OF THE MOST ADMIRED SKILLS IN THE CRAFT. SIX STUNNING PROJECTS DEVELOP YOUR EXPERTISE, INCLUDING A VERY THIN, ALMOST TRANSPARENT CROSS-GRAIN BOWL AND A FINE, NATURAL-EDGE END-GRAIN GOBLET. 8 1/4 X 10 7/8. ALL IN COLOR, 144 PAGES, PAPERBACK.
|
|
|
|
Books
|
COMPLETE ILLUSTRATED GUIDE TO TURNING©
|
| Illust Guide To Turning
|
A STEP-BY-STEP PICTORIAL REFERENCE BY RICHARD RAFFAN THAT COVERS ALL OF THE ESSENTIAL TECHNIQUES FOR TURNING WOOD:
ORGANIZED FOR EASY ACCESS, THE BOOK MAKES IT EASY TO FIND BASIC TO ADVANCED TECHNIQUES. OVER 850 PHOTOS AND DRAWINGS ILLUSTRATE HOW TO HOLD, SHARPEN AND USE TURNING TOOLS, USE SPECIALIZED CHUCKS, DEEP HOLLOW ELEGANT VESSELS, FINISH AT THE LATHE AND MUCH MORE. THE AUTHOR HAS BEEN INTERNATIONALLY RECOGNIZED FOR BOTH HIS GALLERY QUALITY PRODUCTION WORK AND HIS TEACHING. HARDCOVER. 9-1/2" X 11-1/4", 246 PAGES.
|
|
|
|
Books
|
THE FUNDAMENTALS OF WOODTURNING©
|
| Fundamentals Of Woodturning
|
|
THE BEST ALL-AROUND GUIDE TO TURNING! INSIDE YOU WILL FIND COMPREHENSIVE INFORMATION ON TOOLS, WOOD SELECTION, BOWL TURNING, SPINDLE TURNING AND MORE. AN ESSENTIAL RESOURCE FOR WOOD TURNERS OF ALL LEVELS. INCLUDES HUNDREDS OF COLOR PHOTOGRAPHS AND DIAGRAMS. 198 PAGES, 8-1/2" X 11" SOFTCOVER.
|
|
|
|
Books
|
WOODTURNING METHODS©
|
| Woodturning Methods
|
|
INTERMEDIATE AND ADVANCED TURNERS WILL FIND A PLETHORA OF INFORMATION THAT LOOKS AT THE TOOLS AND TECHNIQUES NEEDED TO CREATE A VARIETY OF EFFECTS INCLUDING CHUCKING, TURNING SPINDLES AND ROUND OBJECTS, MULTI-AXIS TURNING, TURNING ELLIPSES AND RINGS AND DRILLING METHODS ON THE LATHE. 200 PAGES, 8-1/2" X 11" SOFTCOVER.
|
|
|
|
Books
|
WOODTURNING TECHNIQUES©
|
| Woodturning Techniques
|
|
LEARN THE TECHNIQUES NECESSARY TO MASTER THE LATHE. IN THIS BOOK BY MIKE DARLOW, YOU WILL FIND CAREFULLY WRITTEN TEXT, CLOSE-UP COLOR PHOTOGRAPHY AND DETAILED DIAGRAMS TO EXPLAIN EACH TECHNIQUE IN DEPTH. ALSO INCLUDED ARE 40 HISTORICAL ENGRAVINGS, 90 COLOR DIAGRAMS AND OVER 400 COLOR PHOTOGRAPHS. SOME OF THE TECHNIQUES PRESENTED ARE HUNDREDS OF YEARS OLD, WHILE OTHERS ARE MORE RECENT. 200 PAGES, 8-1/2" X 11" SOFTCOVER.
|
|
|
|
Books
|
WOODTURNING WITH RAY ALLEN©
|
| Woodturning With Ray Allen
|
|
MOVE BEYOND BASIC WOODTURNING WITH CREATIVE "SEGMENTED" WOODTURNING. INSIDE THE BOOK YOU WILL FIND EVERYTHING YOU NEED TO KNOW ABOUT RAY ALLEN, SEGMENTED WOODTURNING AND HOW TO CREATE YOUR OWN BEAUTIFUL PIECES. 144 PAGES, 8-1/2" X 11" SOFTCOVER.
|
|
|
|
Books
|
POPULAR MECHANICS WORKSHOP: LATHE FUNDAMENTALS©
|
| Popular Mechanics Wkshp-lathe Fund
|
WITH MORE THAN 300 COLOR PHOTOS, THIS FOURTH AUTHORITATIVE POPULAR MECHANICS' WORKSHOP TOOL BOOK HELPS WOODWORKERS TAKE FULL ADVANTAGE OF THIS MOST ESSENTIAL PIECE OF EQUIPMENT:
AUTHOR RICK PETERS DISCUSSES EVERY ASPECT OF THE LATHE, FROM THE SIMPLEST FUNCTION UP TO THE MOST ADVANCED TECHNIQUES. HE EXAMINES THE VARIOUS BRANDS AND MODELS, AS WELL AS ALL THEIR FEATURES AND ACCESSORIES AND THEN PUTS WOODWORKERS THROUGH THEIR PACES. DELVES INTO THE DETAILS OF SPINDLE, FACEPLATE, BOWL AND EMBELLISHING TURNING; FINISHING; MAKING JIGS AND FIXTURES; AND DOING MAINTENANCE AND TROUBLESHOOTING. 192 PAGES. 8-1/2" X 10" SOFTCOVER; ALL IN COLOR.
|
|
|
|
Books
|
SUCCESS WITH SHARPENING©
|
| Success With Sharpening
|
ILLUSTRATED WITH 200 COLOR PHOTOGRAPHS AND DIAGRAMS, THIS INTRODUCTORY GUIDE TACKLES A FUNDAMENTAL, YET VITAL FOR SUCCESS, WOODWORKING PROCESS - TOOL SHARPENING:
SHARPENING BY HAND, FROM OILSTONES AND HONING TO SLIPS AND STROPS; MACHINE SHARPENING, INCLUDING CONTROLLING HEAT BUILDUP AND GRINDING WHEELS ARE COVERED. SPECIFIC DIRECTIONS ARE PROVIDED FOR SHARPENING TURNING AND CARVING TOOLS, MARKING DEVICES, SCRAPERS, PLANER BLADES, GREEN WOODWORKING TOOLS AND HOUSEHOLD ITEMS. 176 PAGES; 8-1/4" X 10-7/8" SOFTCOVER.
|
|
|
|
Books
|
THE PEN TURNER'S WORKBOOK©
|
| The Pen Turners Workbook
|
REVISED AND UPDATED EDITION OF ORIGINAL BEST-SELLER, THE PEN TURNER'S WORKBOOK© INCLUDES STEP-BY-STEP DEMONSTRATIONS, 17 BEAUTIFUL PROJECTS, A GALLERY OF STUNNING PENS AND THE LATEST INFORMATION ON TURNING PRODUCTS AND TECHNIQUES:
ADDITIONAL CONTENTS INCLUDE SETTING UP YOUR SHOP, SELECTING MATERIALS, TURNING PENS USING WOOD AND OTHER MATERIALS, IDEAS FOR VISUAL MARKETING AT CRAFT SHOWS TO EARN TOP DOLLAR AND AN EXPANDED FAQS AND TROUBLESHOOTING SECTION. 8-1/2" X 11" SOFTCOVER. 126 PAGES W/COLOR PHOTOS.
|
|
|
|
Books
|
THE WOODTURNER'S FAQ BOOK©
|
| The Woodturners Faq Book
|
DESIGNED TO ANSWER EVERY QUESTION ON A BEGINNING WOODTURNER'S MIND, THE WOODTURNER'S FAQ BOOK© IS THE PERFECT REFERENCE AND INTRODUCTION TO WOODTURNING. THROUGH 12 DETAILED CHAPTERS, AUTHOR FRED HOLDER ADDRESSES:
WHAT LATHE DO I NEED? WHERE DO I GET MY WOOD? HOW DO I TURN A SPINDLE? HOW DO I TURN A BOWL? AND MUCH MORE... 8-1/2" X 10" SOFTCOVER. 128 PAGES W/COLOR PHOTOS AND B&W DIAGRAMS.
|
|
|
|
Books
|
WOOD IDENTIFICATION & USE©
|
| Wood Identification & Use
|
MORE THAN 200 SPECIES FROM AROUND THE WORLD ARE DESCRIBED IN DETAIL IN WOOD IDENTIFICATION & USE© WHILE ANOTHER 200 ARE LISTED IN BRIEF:
CONTAINS DATA ON WORKING PROPERTIES, SEASONING REQUIREMENTS, TYPICAL USES AND SAFETY CONSIDERATIONS. INCLUDES WOODS USED IN CABINETMAKING, JOINERY, CARPENTRY, TURNING, CARVING AND A HOST OF MORE SPECIALIST APPLICATIONS. CONTAINS VALUABLE INFORMATION ON WOOD DEFECTS AND POTENTIAL HEALTH HAZARDS. 8-1/2" X 11" HARDCOVER. 288 PAGES W/COLOR PHOTOS AND DIAGRAMS.
|
|
|
|
Books
|
WOODTURNING A FOUNDATION COURSE (NEW EDITION)
|
| Woodturning - A Foundation Course
|
THE BASIC COURSE ON WOODTURNING FOR 10 YEARS JUST GOT BETTER! MORE PHOTOS, MORE COLOR, NEW AND EXCITING PROJECTS, AND A WHOLE HOST OF NEW TECHNIQUES AND MACHINES ARE COVERED. IT'S THOROUGHLY UPDATED AND EXPANDED TO INCLUDE ALL THE LATEST LATHES AND ACCESSORIES. START WITH THE MOST SUITABLE TYPES OF WOOD YOU'LL NEED. THEN DEVELOP YOUR TECHNIQUES FOR BETWEEN-CENTERS AND FACEPLATE TURNING, AND BORING AND ROUTING ON THE LATHE. TRY 12 PROJECTS, INCLUDING A GOBLET, AN APPLE AND A PEAR, A PLATTER, STAIRCASE BALUSTERS, AN INLAID NUT BOWL, A TWIG POT, A PEPPER MILL, A TABLE LAMP, AND A TWIST PEN. IT'S THE FIRST TURNING BOOK YOU SHOULD EVER OWN. 176 PAGES (ALL IN COLOR), 8 1/4 X 10 7/8. NEW EDITION. 4 X 10 7/8.
PAPERBACK.
|
|
|
|
Clothing - Protective
|
VERY DURABLE, YET LIGHTWEIGHT, DISPOSABLE COVERALLS
|
| Disposable Coverall/medium
...plus other(s)
|
MADE FROM DURABLE TYVEK®, DISPOSABLE COVERALLS RESIST TEARS AND ARE VERY COMFORTABLE:
ZIPPERED FRONTS MAKE THEM EASY TO GET INTO AND OUT. CAN BE USED OVER AND OVER, YET THROWN AWAY WHEN NECESSARY. GREAT FOR PAINTING, WOODTURNING AND ALL SHOP WORK.
|
|
|
|
Finishes - Coatings
|
H. BEHLEN® TRADITIONAL VARNISHES FOR EVERY PURPOSE
|
| Water White Varnish
...plus other(s)
|
FOUR VARNISHES THAT WILL MEET YOUR FINE WOODFINISHING REQUIREMENTS:
WATER WHITE RESTORATION VARNISH IS A MARINE SPAR VARNISH SUITABLE FOR INTERIOR OR EXTERIOR APPLICATIONS: HIGHLY RESISTANT TO WEATHER, SALT WATER AND HEAVY FOOT TRAFFIC. DRIES CLEAR IN 4 TO 5 HOURS; RECOAT AFTER OVERNIGHT DRYING. USE MINERAL SPIRITS FOR THINNING AND CLEAN UP.
ROCKHARD™ TABLE TOP VARNISH PRODUCES AN EXTREMELY HARD FINISH THAT IS HIGHLY RESISTANT TO ALCOHOLS, CHEMICALS AND OTHER HARSH WEAR: DRIES TO A HIGH GLOSS IN ABOUT 4 HOURS; READY TO RECOAT OR RUBOUT OVERNIGHT. USE ONLY ROCKHARD™ REDUCER FOR THINNING AND CLEANING.
VIOLIN VARNISH IS A BLEND OF SUPER BLONDE SHELLAC FLAKES, GUM MASTIC AND GUM SANDARAC: PRODUCES A HARD, WATER-RESISTANT FILM THAT STAYS ELASTIC, MAKING IT IDEAL FOR MUSICAL INSTRUMENTS. THIN AND CLEAN UP WITH BEHKOL.
WOODTURNER'S FINISH IS FOR FINISHING TURNINGS WHILE THEY ARE STILL ON THE LATHE. SPECIFICALLY FORMULATED TO COVER EVENLY, WITH NO LAP MARKS AND VERY LITTLE DRAG, JUST WIPE IT ONTO A SLOWLY SPINNING TURNING WITH A PAD.
JAPAN DRIER SHORTENS THE CURE TIME OF OIL BASED PRODUCTS SUCH AS NATURAL RESIN VARNISHES, LINSEED OIL MIXTURES AND OTHER FORMULATIONS.
NOTE: REGULATIONS RESTRICT DELIVERIES OF CERTAIN ITEMS (SEE BELOW). USA.
|
|
|
|
Hand Tools - Turning
|
SKEWJY GOUGE IS A MULTIPURPOSE TURNING TOOL
|
| 3/8" Skewjy Gouge
...plus other(s)
|
THE "ALAN BEECHAM" SKEWJY GOUGE PERFORMS THE FUNCTIONS OF BOTH A SKEW AND A GOUGE WITH A REDUCED CHANCE OF "CATCH":
3/8" THICK HIGH SPEED STEEL CUTTER. 19-1/2" OVERALL TOOL LENGTH. VERSATILE TURNING TOOL WORKS EQUALLY WELL ON HARD AND SOFT WOODS. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
IRONS TOOL GATE PROVIDES EXCELLENT WOODTURNING CONTROL
|
| Irons Tool Gate, 1" Post
...plus other(s)
|
THE WOODCUT® IRONS TOOL GATE PIVOTING SADDLE FIRMLY SUPPORTS PRO-FORME AND OTHER ROUND SHAFT TURNING TOOLS WHILE CUTTING:
GATE EXTENSION PLATFORM FIRMLY CONNECTS TO TOOL SUPPORT POST WHILE AN ADJUSTABLE LOCKING COLLAR CAN BE TIGHTENED ONCE PROPER TOOL HEIGHT HAS BEEN SET. 5/8" AND 1-1/8" "U" SHAPED TOOL GUIDES, PLATFORM AND TOOL POST INCLUDED. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-FORME TOOLS - 131-552.
|
|
|
|
Hand Tools - Turning
|
CUP HOLLOWING TOOL
|
| Cup Hollowing Tool, Handled
...plus other(s)
|
THE WOODCUT® CUP HOLLOWING TOOL IS SPECIFICALLY DESIGNED FOR TURNING END GRAIN OPEN BOWLS, CUPS, GOBLETS AND SMALL VASES. WILL PRODUCE A VERY SMOOTH SURFACE WITH MINIMAL SANDING. WHEN THE CUTTER EDGE DULLS, JUST LOOSEN AND ROTATE CUTTER TO EXPOSE A SHARP CUTTING EDGE. RECOMMENDED FOR EXPERIENCED TURNERS WITH GOOD TOOL CONTROL:
SHAFT IS 1/2" DIAMETER AND 10-3/4" LONG. CUTTERS ARE 1/2" DIAMETER. AVAILABLE HANDLED AND UNHANDLED. UNHANDLED TOOL FITS WOODCUT FLEXI, ONEWAY SURE-GRIP AND KELTON HANDLES. INSTRUCTIONS INCLUDED. NEW ZEALAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
WOODCUT FLEXI HANDLE - 155-171. ONEWAY SURE-GRIP HANDLES - 129-683. KELTON HANDLES - 130-778.
|
|
|
|
Hand Tools - Turning
|
SORBY PROBE AND SWAN NECK HOLLOWING TOOLS
|
| 3/8" X 20" Probe Hollowing Tool
...plus other(s)
|
DESIGNED TO WORK THROUGH NARROW OPENINGS, THE ROBERT SORBY SWIVEL-TIP PROBE AND SWAN NECK HOLLOWING TOOLS WILL QUICKLY HOLLOW OUT BOWL AND VASE FORMS. THE STRAIGHT SHAFTED PROBE TOOLS WILL OPEN OUT THE FORMS WHILE THE SWAN NECK TOOLS ARE DESIGNED TO CUT THE INSIDE WALLS AND UNDERCUT RIM AREAS. THE HIGH SPEED STEEL SWIVEL-TIP CUTTERS CAN BE POSITIONED FOR THE MOST EFFECTIVE CUTTING ANGLE AND ARE SUITABLE FOR BOTH SIDE AND END GRAIN WORK. THE MAXIMUM RECOMMENDED EXTENSION OVER THE TOOL REST IS 5-1/2" FOR THE 20" TOOLS AND 7" FOR THE 24" TOOLS. OPTIONAL WALL THICKNESS GAUGES TAKE THE GUESSWORK OUT OF DETERMINING WALL THICKNESS AND ARE AVAILABLE FOR THE 14" AND 20" SWAN NECK TOOLS:
ALL TOOLS ARE FITTED WITH BULLET TIP CUTTERS. 859H AND 8802H TOOLS ALSO COME WITH ACCESSORY RS233C BALL END CUTTER. ENGLAND.
SPECIFICATIONS:
8801H PROBE TOOL: 3/8" BAR DIAMETER X 20" OAL. 8802H PROBE TOOL: 1/2" BAR DIAMETER X 24" OAL. 851H SWAN NECK TOOL: 3/8" BAR DIAMETER X 14" OAL. 855H SWAN NECK TOOL: 1/2" BAR DIAMETER X 20" OAL. 859H SWAN NECK TOOL: 5/8" BAR DIAMETER X 24" OAL. 854 WALL THICKNESS GAUGE FITS 14" 851H SWAN NECK TOOL. 857H WALL THICKNESS GAUGE FITS 20" 855H SWAN NECK TOOL. 851C BULLET TIP CUTTER FITS 851H, 855H AND 8801H TOOLS. RS232C BULLET TIP CUTTER FITS 859H AND 8802H TOOLS. RS233C BALL END CUTTER FITS 859H AND 8802H TOOLS. RS200C TEARDROP CUTTER FITS 859H AND 8802H TOOLS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SORBY TURNING TOOLS - 153-605. SORBY HOLLOWMASTER TOOLS - 153-683. SORBY CHATTERTOOL - 137-249. SORBY SPIRALING SYSTEM - 153-695. SORBY THREAD CUTTING SYSTEM - 137-228. SORBY TURNING SMOCKS - 139-163.
|
|
|
|
Hand Tools - Turning
|
PRO-PM DETAIL GOUGES
|
| 3/8" Pro-pm Detail Gouge
...plus other(s)
|
CROWN PRO-PM DETAIL GOUGES ARE MADE OF HIGH SPEED STEEL USING AN ADVANCED POWDER METAL (PM) TECHNOLOGY RESULTING IN LONG LASTING CUTTING EDGES. GENERALLY USED FOR MAKING COVES AND BEADS, THESE TOOLS ALSO FEATURE LONG SIDE GRINDS FOR LIGHT HOLLOWING CUTS. THE HIGH SPEED STEEL BLADES ARE MADE OF THE FINEST SHEFFIELD STEEL AND THE HANDLES ARE DESIGNED FOR COMFORT AND BALANCE:
HIGHLY FINISHED BLACK ASH HANDLES HAVE BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 19" OAL. ENGLAND.
NOTE: TIP SHOWN FOR DETAIL. TO VIEW TOOLS SEE CROWN PRO-PM 5 PIECE TURNING SET - 137-093.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE SET - 137-093. PRO-PM SPINDLE GOUGES - 110-396. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432. PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Hand Tools - Turning
|
ELLSWORTH PRO-PM SIGNATURE GOUGE
|
| Ellsworth Pm Signature Gouge
|
THE ELLSWORTH PRO-PM SIGNATURE GOUGE BY CROWN TOOLS OF SHEFFIELD, ENGLAND IS A WELL BALANCED, DEEP FLUTED BOWL GOUGE WITH THE CLASSIC ELLSWORTH SIDE GRIND. MADE FROM 5/8" BAR STOCK AND POWDER METAL (PM) HIGH SPEED STEEL, IT HAS EXCEPTIONAL EDGE HOLDING ABILITY FOR THE FINEST PROJECTS. THE EXTRA LONG HANDLE PROVIDES ADDITIONAL LEVERAGE FOR DEEP HOLLOWING. A SET OF DETAILED TURNING INSTRUCTIONS FROM DAVID ELLSWORTH IS INCLUDED:
HIGHLY FINISHED BLACK ASH HANDLE HAS BRASS FERRULE. PACKAGED IN PLASTIC SLEEVE FOR PROTECTION AND STORAGE. 26" OAL, 5/8" BAR DIAMETER. ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM 5 PIECE TURNING SET - 137-093. PRO-PM SPINDLE GOUGE - 110-396. PRO-PM DETAIL GOUGES - 131-537. PRO-PM BOWL GOUGES - 131-549. PRO-PM ROUGHING GOUGE - 131-534. PRO-PM SQUARE SCRAPERS - 110-420. PRO-PM ROUND NOSE SCRAPERS - 110-423. PRO-PM SKEW CHISELS - 110-426. PRO-PM DIAMOND PARTING TOOL - 110-432.
|
|
|
|
Hand Tools - Turning
|
PRO-FORME HOLLOWING TOOL SYSTEM
|
| Pro-forme Starter Kit
...plus other(s)
|
THE WOODCUT® PRO-FORME HOLLOWING TOOLS ARE SOME OF THE MOST EFFECTIVE TURNING TOOLS AVAILABLE FOR DEEP HOLLOWING AND GENERAL ROUGHING WORK. THESE EFFICIENT TOOLS QUICKLY REMOVE LARGE AMOUNTS OF MATERIAL WITHOUT THE FEAR OF CATCH AND DIG-IN. THE SYSTEM INCLUDES THREE BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. THREE DIFFERENT 5/8" DIAMETER BORING BARS ARE AVAIABLE: STRAIGHT FOR GENERAL CUTTING OPERATIONS, SLIGHT BEND FOR INSIDE WALL CUTTING AND HEAVY BEND FOR INSIDE WALL AND UNDER-RIM CUTTING. THE REPLACEABLE POWERHEAD CUTTERS HAVE AN ADJUSTABLE GAUGE FOR LIGHT OR AGGRESSIVE CUTTING OPERATIONS AND THE PROMASTER 20" HANDLE WILL EXTEND REACH TO 10" BEYOND TOOL REST. AN OPTIONAL PRO-SCRAPER ASSEMBLY IS DESIGNED FOR HIGH-SPEED SURFACE FINISHING OPERATIONS:
PRECISION POWERHEAD CUTTERS FEATURE TRIPLE-TEMPERED HIGH SPEED STEEL WITH AN OPEN-SIDED HOOK TO ALLOW SHAVINGS TO BE EJECTED WITHOUT CLOGGING. CUTTERS ARE SHARPENED WITH HAND HELD DIAMOND HONES ROTATED AROUND THE CUTTER END - INSTRUCTIONS INCLUDED. PRO-FORME STARTER KIT INCLUDES STRAIGHT BORING BAR WITH POWERHEAD CUTTER AND A PROMASTER 20" HANDLE. PRO-FORME ADVANCED KIT INCLUDES STRAIGHT, SLIGHT BEND AND HEAVY BEND BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. 1-1/8" DIAMETER PROMASTER 20" HANDLE HAS A PADDED FOAM GRIP FOR COMFORT AND CONTROL. THE 5/8" DIAMETER END COUPLERS MAKE IT POSSIBLE TO JOIN TWO OR MORE HANDLES TOGETHER FOR AN EVEN LONGER REACH. OPTIONAL PRO-SCRAPER ASSEMBLY INCLUDES TWO HIGH SPEED STEEL SCRAPER CUTTERS. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FLEXI HOLLOWERS - 155-168. IRONS TOOL GATE - 130-805. DIAMOND FLEXI-SHARP HONES - 957-706. 4-WAY DIAMOND HONE - 874-974. DIA-SHARP HONES - 115-403.
|
|
|
|
Hand Tools - Turning
|
PRO-PM SPINDLE GOUGES
|
| 3/8" Pro-pm Spindle Gouge
...plus other(s)
|
CROWN PRO-PM TURNING TOOLS HAVE EXCEPTIONALLY HARD HIGH SPEED STEEL WITH CUTTING EDGES THAT LAST LONGER THAN TRADITIONAL HIGH SPEED STEEL. THE PM PROCESS USES AN ADVANCED METALLURGY PROCESS WHERE THE POWDERED METAL IS MELTED AND COMPRESSED INTO MOLDS INSTEAD OF EXTENDED INTO RODS AND SHEETS. THIS ENSURES A MORE EVEN MIXTURE AND THE BEST POSSIBLE MOLECULAR ALIGNMENT PRODUCING AN EXCEPTIONALLY HARD HIGH SPEED STEEL:
TOOLS HAVE PRECISION GROUND CUTTERS WITH BLACK ASH HANDLES AND BRASS FERRULES. PACKAGED IN PLASTIC SLEEVES FOR PROTECTION AND STORAGE. 5-PC PRO-PM TURNING SET INCLUDES 3/4" ROUGHING GOUGE, 3/8" SPINDLE GOUGE, 1/2" BOWL GOUGE, 3/4" SKEW CHISEL AND 3/16" DIAMOND PARTING TOOL. BOWL GOUGE BAR DIAMETERS ARE APPROX 1/8" LARGER THAN SIZES INDICATED. 19" OAL (26" OAL FOR LONG BOWL GOUGES). ENGLAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
PRO-PM ELLSWORTH SIGNATURE GOUGE - 131-543.
|
|
|
|
Advanced Search Tools
Browse
will
