|
|
|
ALLWOOD™ TWO-PLY VENEERS ELIMINATE BLACK LINES AT EDGES AND REDUCE "TELEGRAPHING"
|
| Red Oak 2'x8' Allwd Veneer
...plus other(s)
|
SHEETS OF ALLWOOD™ "A" GRADE VENEER ARE LAMINATED AT A RIGHT ANGLE TO VENEER OF THE SAME OR SIMILAR SPECIES TO OFFER THE LOOK OF SOLID WOOD ON LAMINATED SURFACES:
CONSTRUCTION REDUCES CHECKING, TELEGRAPHING AND OFFERS BETTER FLEXIBILITY. TWO PLY ALL WOOD CONSTRUCTION ELIMINATES THE BLACK LINES OFTEN FOUND AT THE EDGES OF OTHER VENEER APPLICATIONS. ALLWOOD™ VENEERS AVERAGE BETWEEN .038 AND.042 IN TOTAL THICKNESS INCLUDING FACE, LAMINATING ADHESIVE AND BACKING VENEER. SANDED SMOOTH, IT'S ALMOST READY TO FINISH. SOME VERY LIGHT FINAL SANDING WITH 220 GRIT PAPER MAY BE REQUIRED BEFORE FINISH IS APPLIED. AVAILABLE IN 24" X 96" AND 48" X 96" SHEETS IN EIGHT DOMESTIC WOOD VARIETIES. USA
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
888-864 - ROTARY CUTTER - CLICK HERE. 899-649 - JAPANESE VENEER SAW - CLICK HERE. 909-293 - OL' YELLER™ YELLOW WOOD GLUE - CLICK HERE. 893-723 - J-HANDLE/PRESSURE ROLLERS - CLICK HERE. 821-791 - SABEL® BLOCK ROLLER - CLICK HERE.
|
|
|
|
THIS ARCHITECTURAL GRADE, FLEXIBLE SHEET VENEER IS USED BY DESIGNERS AND CUSTOM FURNITURE MAKERS
|
| 2'x8' Tamo Ash Burl Veneer
...plus other(s)
|
|
JACARANDA VENEERS ARE OF UNPARALLELED QUALITY WITH EXCELLENT FLEXIBILITY AND RESISTANCE TO SHRINKAGE OR EXPANSION. 4-PLY LAMINATED SHEETS HAVE A 12-MIL (.012 WOOD FACE WITH A 2-MIL (.002) PAPER AND A 2-MIL (.002) ALUMINUM LINER BONDED TO A 5-MIL (.005)PAPER OUTER LINER. SHEETS AVERAGE ABOUT 21-MIL (.021) OVERALL THICKNESS. ALUMINUM LAYER ACTS AS A BARRIER BETWEEN THE APPLICATION ADHESIVE AND THE APPLIED FINISH AND REDUCES THE SHRINKAGE OR EXPANSION TO .5% (MANY OTHER WOOD VENEERS HAVE SHRINKAGE OR EXPANSION IN THE RANGE OF 3-6%). ARCHITECTURAL (AA) GRADE FACE IS PRE-SANDED TO 220-GRIT. (EXERCISE CAUTION WITH ANY FURTHER SURFACE SANDING). SHEETS WILL BEND AROUND A 1/4 RADIUS ACROSS THE GRAIN AND A 1/16 RADIUS WITH THE GRAIN WITHOUT CRACKING OR CHECKING LIKE CONVENTIONAL VENEERS. CAN BE APPLIED WITH NEARLY ANY TYPE OF WOODWORKING ADHESIVE. ACCEPTS MOST STANDARD FINISHES INCLUDING LACQUERS, RESINS, VARNISHES AND OILS WITH NO EFFECT ON THE BOND TO THE BACKING MATERIAL. SHEETS ARE PRODUCED USING A PATENTED ENVIRONMENT FRIENDLY™SLICING PROCESS THAT INCREASES YIELD UP TO 300% REQUIRING FEWER TREES THAN CONVENTIONAL SLICING METHODS. 120-482, 120-488, 120-491 REALTEC™ TECHNICALLY ENHANCED WOOD VENEERS USE A UNIQUE PROCESS TO ALTER THE WOOD FIBERS TO PRODUCE A DISTINCTIVE FIDDLEBACK GRAIN PATTERN IN THE WOOD NOT JUST PRINTED ONTO THE SURFACE./LI> AVAILABLE IN 24 X 96 SHEETS. IMPORTED. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST: 888-864 - ROTARY CUTTER - CLICK HERE. 899-649 - JAPANESE VENEER SAW - CLICK HERE . 116-348 - FLEXIBLE SHEET VENEER ADHESIVE - CLICK HERE . 893-723 - J-HANDLE/PRESSURE ROLLERS - CLICK HERE . 821-791 - SABEL&174; BLOCK ROLLER - CLICK HERE.
|
|
|
|
REAL WOOD VENEERS WITH IRON-ON CONVENIENCE
|
| 2'x4' Red Oak Iron On Veneer
...plus other(s)
|
REAL WOOD VENEERS HAVE A 5-MIL (.005")FACE WITH A 10-MIL (.010") PAPER BACKING AND USE A HEAT SET, IRON-ON ADHESIVE. IDEAL FOR OVERLAYS ON FURNITURE, CABINETS AND BOXES:
AVAILABLE AS 24" X 48" SHEETS IN EIGHT DOMESTIC SPECIES PLUS AFRICAN MAHOGANY AND TEAK - ALL SPECIES HAVE FLAT CUT GRAIN PATTERN. ADHESIVE IS ACTIVATED AT 200°C (392°F), EQUIVALENT TO THE "COTTONS" SETTING ON HOUSEHOLD IRONS. TO APPLY, PLACE VENEER ON CLEAN, SMOOTH SUBSTRATE AND APPLY HEATED IRON TO ACTIVATE ADHESIVE (USE A PIECE OF BROWN KRAFT PAPER TO COVER THE VENEER SURFACE WHILE APPLYING HEAT TO KEEP BOTH VENEER AND IRON CLEAN).
|
|
|
|
TOP QUALITY WOOD VEENERS AT CLEARANCE PRICES
|
| 2'x8' Figured Anegre Veneer
...plus other(s)
|
WHEN IT COMES TO BACKED VENEERS, IT'S HARD TO BEAT EDGEMATE® CABINETMAKER-PRO 10MIL - ESPECIALLY AT THESE DISCONTINUED PRODUCT PRICES FOR ANEGRE, QUARTERED SAPELE, AFRICAN ROSEWOOD AND MORE:
VERY FLEXIBLE VENEER IS EASY TO WORK WITH, MAKING IT THE SOLUTION FOR WRAPPING CONTOURS AND SHAPES. CUTS WITH SCISSORS. APPLIES IN SECONDS WITH GLUE, CONTACT CEMENT OR HOT MELT. STANDARD 4' X 8' SHEETS AND 2' X 8' SECTIONS.
LIMITED TO QUANTITIES ON HAND
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FLEXIBLE SHEET VENEER ADHESIVE - 116-351. TITEBOND® NEOPRENE CONTACT CEMENT - 927-519. HOT MELT SHEET ADHESIVE - 132-008.
|
|
|
|
COMPOSITE HARDWOOD VENEERS AT PRICES YOU PROBABLY WON'T SEE AGAIN
|
| 10 Mil Birdseye Brandied Peach Ven
...plus other(s)
|
BONDED THROUGH HEAT AND PRESSURE ONTO 10 MIL PAPER BACKING, BROOKLINE PAPERBACK VENEER IS STRESS RELIEVED, SANDED AND TRIMMED. THE RESULTING PRODUCT IS AN EXTREMELY FLEXIBLE VENEER, IDEAL FOR LAMINATING ONTO CURVED OR FLAT SURFACES:
COLORS AND GRAIN PATTERNS ARE CONSISTENT, ALLOWING YOU TO EASILY MATCH PROJECTS. CUT WITH SCISSORS - APPLY WITH GLUE, CONTACT CEMENT OR HOT MELT. FINISHING METHODS ARE THE SAME AS NON-COMPOSITE VENEER. 4' X 8' SHEETS AND 2' X 8' SECTIONS.
LIMITED TO QUANTITIES ON HAND
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FLEXIBLE SHEET VENEER ADHESIVE - 116-351. TITEBOND® NEOPRENE CONTACT CEMENT - 927-519. HOT MELT SHEET ADHESIVE - 132-008.
|
|
|
|
NON-WOVEN BACKING MAKES THESE VENEERS EASY TO APPLY
|
| 2'x8' White Ash Psa Veneer
...plus other(s)
|
THESE EDGEMATE®CAB-PRO 10-MIL™ TOP QUALITY WOOD VENEERS ARE AVAILABLE IN TWO STYLES, THREE SIZES AND 13 SPECIES TO MATCH JUST ABOUT ANY PROJECT:
10 MIL PAPER BACKED VENEERS REQUIRE GLUING TO THE SUBSTRATE AND FEATURE A NON-WOVEN FIBER TO KEEP THEM STRAIGHT AND FLAT. PRESSURE SENSITIVE ADHESIVE (PSA) VENEERS ARE ALSO PAPER BACKED AND HAVE A STRONG 3M® ADHESIVE APPLIED TO THE BACKING - ALL YOU DO IS PEEL OFF THE PROTECTIVE SHEET AND PRESS TO APPLY. PLAIN BACKED VENEERS AVERAGE .024" IN OVERALL THICKNESS WITH A .012" THICK WOOD FACE. PSA BACKED VENEERS AVERAGE .031" IN OVERALL THICKNESS WITH A .012" THICK FACE. EASILY CUT TO SIZE WITH SCISSORS OR UTILITY KNIFE. USA TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
888-864 - ROTARY CUTTER - 888-864. 899-649 - JAPANESE VENEER SAW - 899-649. 116-348 - FLEXIBLE SHEET VENEER ADHESIVE - 116-348. 893-723 - J-HANDLE/PRESSURE ROLLERS - 893-723. 821-791 - SABEL® BLOCK ROLLER - 821-791.
|
|
|
|
Wood Specialties - Buttons & Plugs
|
END GRAIN FLAT HEAD TAPER PLUGS
|
| 3/8" Birch Plugs
...plus other(s)
|
WHEN GLUED INTO PLACE AND SANDED SMOOTH, FLAT HEAD TAPER PLUGS ARE PERFECT FOR HIDING SCREW AND OTHER HOLES:
1/4" THICK END GRAIN PLUGS HAVE A 1° TAPER FOR A SNUG FIT. SOLD IN PACKAGES OF 100 OR BOXES OF 1,000.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
OL' YELLER™ CABINETMAKER'S GLUE - 909-293.
|
|
|
|
Wood Specialties - Buttons & Plugs
|
SOLID WOOD OVAL HEAD BUTTONS HIDE HOLES
|
| 3/8" Birch Oval Head Buttons
...plus other(s)
|
WHEN PRESSED OR GLUED INTO PLACE, SOLID WOOD OVAL HEAD BUTTONS ARE PERFECT FOR HIDING SCREW OR BOLT HOLES:
AVAILABLE IN BIRCH, OAK, CHERRY, WALNUT AND MAHOGANY. SOLD IN PACKAGES OF 100 OR IN BULK BOXES OF 1,000.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
OL' YELLER™ ALIPHATIC YELLOW GLUE - 909-293.
|
|
|
|
Wood Specialties - Buttons & Plugs
|
OAK AND BIRCH ROUND HEAD TAPERED PLUGS
|
| 3/8 "birch Round Head Plug
...plus other(s)
|
ROUND HEAD HARDWOOD PLUGS ADD A DECORATIVE, FINISHED TOUCH TO YOUR PROJECTS:
SMOOTH SANDED PLUGS ARE READY TO USE AND HAVE A 1° TAPER FOR EASIER FITTING. 9/32" HIGH - TWO DIAMETERS TO CHOOSE FROM.
|
|
|
|
Wood Specialties - Buttons & Plugs
|
SIDE GRAIN TAPERED PLUGS HIDE HOLES BETTER
|
| 3/8" Oak Side Grain Plugs
...plus other(s)
|
WHILE MORE COSTLY THAN FLAT HEAD TAPERED PLUGS, SIDE GRAIN TAPERED PLUGS DO A MUCH BETTER JOB OF HIDING SCREW HOLES. MATCH THE WOOD, ALIGN THE GRAIN AND GLUE INTO PLACE:
1° TAPER; 1/4" HIGH. AVAILABLE IN OAK, WALNUT AND MAPLE. SOLD IN PACKAGES OF 100.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
909-293 - OL' YELLER™ ALIPHATIC YELLOW GLUE.
|
|
|
|
Wood Specialties - Dowel Rods
|
THREE AND FOUR FOOT LONG TROPICAL HARDWOOD DOWELS IDEAL FOR CRAFTS
|
| 3/16" X 36" Hardwood Dowel
...plus other(s)
|
AN INEXPENSIVE ALTERNATIVE TO OTHER HARDWOODS, THESE 36" AND 48" LONG TROPICAL HARDWOOD DOWELS HAVE A SPECIFIC WEIGHT SIMILAR TO WHITE BIRCH:
1/4" TO 1-1/4" DIA. SANDED SMOOTH AND UNFINISHED. NOTE: COLORS AND SPECIES WILL VARY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
OAK DOWELS - 203-000. WALNUT DOWELS - 203-017. CHERRY DOWELS - 203-018. MAHOGANY DOWELS - 203-019. MAPLE DOWELS - 863-716.
|
|
|
|
Wood Specialties - Dowel Rods
|
THREE AND FOUR FOOT LONG OAK DOWELS ARE IDEAL FOR PROJECTS
|
| 1/4"x36" Oak Dowel
...plus other(s)
|
GREAT FOR PROJECTS AND FOR MAKING CONTRASTING OR MATCHING DOWEL PINS, THESE 36" AND 48" LONG DOWELS ARE CUT FROM THE FINEST OAK:
1/4" TO 1-3/4" DIA. SANDED SMOOTH AND UNFINISHED.
IF YOU NEED OTHER HARDWOODS:
203-017 - WALNUT DOWELS. 203-018 - CHERRY DOWELS. 203-019 - MAHOGANY DOWELS. 863-716 - MAPLE DOWELS. 119-366 - HARDWOOD DOWELS FOR CRAFTS.
|
|
|
|
Wood Specialties - Dowel Rods
|
THREE AND FOUR FOOT LONG WALNUT DOWELS ARE IDEAL FOR PROJECTS
|
| 3/8"x36" Walnut Dowel
...plus other(s)
|
GREAT FOR PROJECTS AND FOR MAKING CONTRASTING OR MATCHING DOWEL PINS, THESE 36" AND 48" LONG DOWELS ARE CUT FROM THE FINEST WALNUT:
1/4" TO 1-3/4" DIA. SANDED SMOOTH AND UNFINISHED.
IF YOU NEED OTHER HARDWOODS:
203-000 - OAK DOWELS. 203-018 - CHERRY DOWELS. 203-019 - MAHOGANY DOWELS. 863-716 - MAPLE DOWELS. 119-366 - HARDWOOD DOWELS FOR CRAFTS.
|
|
|
|
Wood Specialties - Dowel Rods
|
THREE AND FOUR FOOT LONG CHERRY DOWELS ARE IDEAL FOR PROJECTS
|
| 3/8"x36" Cherry Dowel
...plus other(s)
|
GREAT FOR PROJECTS AND FOR MAKING CONTRASTING OR MATCHING DOWEL PINS, THESE 36" AND 48" LONG DOWELS ARE CUT FROM THE FINEST CHERRY:
1/4" TO 1-3/4" DIA. SANDED SMOOTH AND UNFINISHED.
IF YOU NEED OTHER HARDWOODS:
203-000 - OAK DOWELS. 203-017 - WALNUT DOWELS. 203-019 - MAHOGANY DOWELS. 863-716 - MAPLE DOWELS. 119-366 - HARDWOOD DOWELS FOR CRAFTS.
|
|
|
|
Wood Specialties - Dowel Rods
|
THREE AND FOUR FOOT LONG MAHOGANY DOWELS ARE IDEAL FOR PROJECTS
|
| 1/4"x36" Mahogany Dowel
...plus other(s)
|
GREAT FOR PROJECTS AND FOR MAKING CONTRASTING OR MATCHING DOWEL PINS, THESE 36" AND 48" LONG DOWELS ARE CUT FROM THE FINEST MAHOGANY:
1/4" TO 1-3/8" DIA. SANDED SMOOTH AND UNFINISHED.
IF YOU NEED OTHER HARDWOODS:
203-000 - OAK DOWELS. 203-017 - WALNUT DOWELS. 203-018 - CHERRY DOWELS. 863-716 - MAPLE DOWELS. 119-366 - HARDWOOD DOWELS FOR CRAFTS.
|
|
|
|
Wood Specialties - Dowel Rods
|
THREE FOOT LONG HARDWOOD DOWEL ASSORTMENT
|
| 28 Dowel Assortment
|
GREAT FOR PROJECTS AND FOR MAKING CONTRASTING OR MATCHING DOWEL PINS, THESE 36" LONG, ASSORTED DOWELS ARE SANDED SMOOTH AND UNFINISHED:
TWO, EACH, 1/4" DIA. OAK, WALNUT, CHERRY, MAHOGANY. TWO, EACH, 3/8" DIA. OAK, WALNUT, CHERRY, MAHOGANY. TWO, EACH, 1/2" DIA. OAK, WALNUT, CHERRY, MAHOGANY. ONE, EACH, 1" DIA. OAK, WALNUT, CHERRY, MAHOGANY.
IF YOU REQUIRE ADDITIONAL SUPPLIES:
CHERRY DOWELS - 203-018. MAHOGANY DOWELS - 203-019. MAPLE DOWELS - 863-716. TROPICAL HARDWOOD DOWELS - 119-366. WALNUT DOWELS - 203-017. FOUR FOOT LONG HARDWOOD DOWEL ASSORTMENT - 815-737.
|
|
|
|
Wood Specialties - Dowel Rods
|
FOUR FOOT LONG HARDWOOD DOWEL ASSORTMENT
|
| 48" Dowel Assortment
|
GREAT FOR PROJECTS AND FOR MAKING CONTRASTING OR MATCHING DOWEL PINS, THESE 48" LONG, ASSORTED DOWELS ARE SANDED SMOOTH AND UNFINISHED:
TWO, EACH, 1/4" DIA. MAPLE, OAK, WALNUT. TWO, EACH, 3/8" DIA. MAPLE, OAK, WALNUT. TWO, EACH, 1/2" DIA. MAPLE, OAK, WALNUT. ONE, EACH, 1" DIA. MAPLE, OAK, WALNUT.
IF YOU REQUIRE ADDITIONAL SUPPLIES:
CHERRY DOWELS - 203-018. MAHOGANY DOWELS - 203-019. MAPLE DOWELS - 863-716. TROPICAL HARDWOOD DOWELS - 119-366. WALNUT DOWELS - 203-017. THREE FOOT LONG HARDWOOD DOWEL ASSORTMENT - 203-098.
|
|
|
|
Wood Specialties - Dowel Rods
|
THREE AND FOUR FOOT LONG MAPLE DOWELS ARE IDEAL FOR PROJECTS
|
| 1/4"x48" Maple Dowel
...plus other(s)
|
GREAT FOR PROJECTS AND FOR MAKING CONTRASTING OR MATCHING DOWEL PINS, THESE 36" AND 48" LONG DOWELS ARE CUT FROM THE FINEST MAPLE:
1/4" TO 1-1/2" DIA. SANDED SMOOTH AND UNFINISHED.
IF YOU NEED OTHER HARDWOODS:
203-000 - OAK DOWELS. 203-017 - WALNUT DOWELS. 203-018 - CHERRY DOWELS. 203-019 - MAHOGANY DOWELS. 119-366 - HARDWOOD DOWELS FOR CRAFTS.
|
|
|
|
Wood Specialties - Dowel Rods
|
THREE AND FOUR FOOT HARDWOOD DOWELS
|
| 1-3/8" X 36" Mahogany Dowel
...plus other(s)
|
MAHOGANY 3' AND 4' HARDWOOD DOWELS ARE GREAT FOR PROJECTS. 1-3/8" AND 1-1/2" DIA. SANDED SMOOTH.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Wood Specialties - Dowel Rods
|
TROPICAL HARDWOOD DOWELS - IDEAL FOR CRAFT PROJECTS
|
| 1/4" X 36" Hardwood Dowel
...plus other(s)
|
|
AN INEXPENSIVE ALTERNATIVE TO OTHER HARDWOOD DOWELS, INDONESIAN AND PHILIPPINE TROPICAL HARDWOOD DOWELS HAVE A SPECIFIC WEIGHT SIMILAR TO WHITE BIRCH:
|
|
|
|
Please Wait......Searching....
to see Sub Categories)
