|
|
|
Adhesives - Specialty
|
3M™ SUPER 77 MULTIPURPOSE ADHESIVE RESISTS BLEEDING, STAINING OR WRINKLING
|
| 3m Super 77 Spray Adhesive
|
3M™ SUPER 77 MULTIPURPOSE ADHESIVE EASILY SPRAYS ON TO SECURELY BOND LIGHTWEIGHT MATERIALS AND CAN BE USED FOR A VARIETY OF JOBS:
USE FOR PERMANENTLY ATTACHING FOIL, CARPETING, LIGHTWEIGHT PAPER, CARDBOARD, FELT OR CLOTH TO PAINTED OR UNPAINTED METALS, WOOD OR HARDBOARD. HIGH COVERAGE, LOW SOAK-IN AND FAST, AGGRESSIVE TACK MAKE IT A VERY VERSATILE ADHESIVE. LOW VOCS. DOES NOT CONTAIN OZONE DEPLETING CFCS. 16-3/4 OZ. AEROSOL CAN. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Adhesives - Specialty
|
TEMPORARY PATTERN MOUNTING ADHESIVES
|
| Repositionable 75 Spray Adhesive
...plus other(s)
|
3M™ REPOSITIONABLE 75 SPRAY ADHESIVE AND H. BEHLEN® MASTER™ SPRAY ADHESIVE ADHERE IN SECONDS, YET HAVE EXTRA LONG TACK RANGES THAT ALLOW YOU TO LIFT AND REPOSITION MATERIALS:
EXCELLENT FOR PRODUCTION LINE WORK WHERE PARTS ARE HELD IN PLACE TEMPORARILY PRIOR TO FINAL ASSEMBLY. BOND PAPER, CARDBOARD, ACETATE, FOIL, FABRICS, SHEETING, ETC. WILL NOT BLEED THROUGH, STAIN OR WRINKLE MOST MATERIALS. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Adhesives - Specialty
|
TWO GLUE GUNS TO SUIT NEARLY ANY NEED IN ANY SHOP
|
| The Leader Glue Gun
...plus other(s)
|
THE HIGH-VOLUME, AD-TECH™ HT LEADER INDUSTRIAL GLUE GUN CAN DELIVER UP TO 4.2 LBS. OF ADHESIVE PER HOUR USING A UNIQUE GRID MELT CHAMBER:
KEEPS UP WITH ALMOST ANY HIGH VOLUME APPLICATION AT A DELIVERY RATE THAT REDUCES HAND FATIGUE - NO HEAT LOSS SLOWDOWNS OR INCREASED FEEDING FORCE. PRESET ELECTRONIC TEMPERATURE CONTROL HOLDS AT 410°F. 120V, 125 WATTS - UL LISTED. LIGHT DUTY MODEL G760 HOT MELT GLUE GUN OPERATES AT 380°F.: METAL STORAGE STAND. 120V, 40W, UL LISTED. USE 1/2" DIA. GLUE STICKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
HOT MELT GLUE STICKS - 895-024.
|
|
|
|
Adhesives - Specialty
|
HIPURFORMER™ POLYURETHANE ADVANCED BONDING SYSTEM GLUES ALMOST ANYTHING
|
| Ww30 Poly Hot Melt
...plus other(s)
|
THE TITEBOND® HIPURFORMER™ POLYURETHANE ADVANCED BONDING SYSTEM PROVIDES PERMANENT, HIGH STRENGTH, WATERPROOF BONDS THAT VIRTUALLY ELIMINATE THE NEED FOR MECHANICAL FASTENERS. EACH KIT CONTAINS:
A CORDLESS HOT MELT GLUE GUN WITH UP TO 20 MINUTES OFF THE CHARGER USE AND THREE POLYURETHANE HOT MELT ADHESIVE CARTRIDGES: - WW30 - QUICK REPAIRS AND SETUPS (30 SECOND SET TIME)
- WW60 - GAP FILLING (60 SECOND SET TIME).
- MP75 - MULTI-PURPOSE BONDING OF WOOD, MELAMINE, CERAMICS, METAL, MOST PLASTICS, MARBLE, GLASS, FRP, BRICK AND MORE (75 SECOND SET TIME).
ADHESIVE APPLICATOR, CHARGER/STAND, DETACHABLE POWER CORD, WEATHER RESISTANT CASE AND INSTRUCTIONS ALSO INCLUDED.
WITH CAPABILITIES SIMILAR TO MP75, BUT A LONGER SET TIME (5 MINUTES), MP300 MULTI-PURPOSE ADHESIVE HAS BEEN SPECIFICALLY FORMULATED FOR ASSEMBLY WORK (NOT INCLUDED IN KIT). EACH 50G HOT MELT ADHESIVE CARTRIDGE CAN PRODUCE A 1/16" X 71' LINE OF GLUE.
|
|
|
|
Adhesives - Specialty
|
FLEXIBLE SHEET VENEER ADHESIVE OFFERS NUMEROUS ADVANTAGES OVER CONTACT CEMENT
|
| Fsv Adhesive-16oz.
...plus other(s)
|
FORMULATED FOR USE WITH A WIDE RANGE OF SHEET GOODS, FLEXIBLE SHEET VENEER (FSV) ADHESIVE PRODUCES A RIGID GLUE LINE THAT RESISTS MOVEMENT WHEN CURED - ESPECIALLY RECOMMENDED FOR BACKED VENEERS AND LAMINATES:
HIGHLY SOLVENT, WATER AND HEAT RESISTANT. CAN BE APPLIED WITH FOAM BRUSH, ROLLER OR SPRAY SYSTEM. MOST APPLICATIONS ONLY REQUIRE APPLYING FSV TO SUBSTRATE - VENEER CAN BE REPOSITIONED OR REMOVED FOR UP TO 10 MINUTES. ONE-HOUR SET TIME, 24 HOUR CURE TIME. WATER-BASED, NON-FLAMMABLE AND NO ANNOYING ODOR. WARM WATER AND SOAP CLEANUP BEFORE SET TIME.
NOTE: TO ENSURE PROPER PERFORMANCE, DO NOT ALLOW WATER-BASED FLEXIBLE SHEET VENEER (FSV) ADHESIVE TO FREEZE.
DUE TO CONDITIONS BEYOND OUR CONTROL, EXPOSURE TO FREEZING TEMPERATURES CAN OCCUR DURING SHIPPING:
BETWEEN OCTOBER 31 AND APRIL 1, IF YOUR ORDER INCLUDES FLEXIBLE SHEET VENEER (FSV) ADHESIVE, TELEPHONE US TOLL-FREE, AT 1-800-645-9292. WE WILL PROCESS YOUR ENTIRE ORDER BUT DELAY SHIPPING THIS WATER-BASED ITEM UNTIL APRIL 1 OR LATER - AT NO ADDITIONAL CHARGE. TO RECEIVE YOUR ORDER, INCLUDING FLEXIBLE SHEET VENEER (FSV) ADHESIVE, WITHOUT DELAY, IT IS NOT NECESSARY TO CALL - SIMPLY PLACE THE ENTIRE ORDER USING OUR WOODWORKER.COM WEB SITE. AS ALWAYS, WE RECOMMEND TESTING A PRODUCT ON SCRAP MATERIAL BEFORE APPLYING IT TO YOUR PROJECT.
|
|
|
|
Adhesives - Specialty
|
TAKE HEAVY DUTY BUTANE POWERED GLUE GUN TO JUST ABOUT ANY JOB, JUST ABOUT ANYWHERE
|
| Butane Glue Gun
|
THE ADTECH CB800 BUTANE-POWERED GLUE GUN LETS YOU GLUE ANYWHERE, ANYTIME:
PIEZO IGNITION SYSTEM USES PRESSURIZED BUTANE LIGHTER GAS (NOT INCLUDED) TO REACH 385°F. OPERATING TEMPERATURE IN LESS THAN 5 MINUTES. VALVED, INSULATED BRASS NOZZLE. HINGED, FOLD AWAY STAND AND ERGONOMIC DESIGN FOR COMFORTABLE USE. 7-1/4"L X 7-1/2"H X 1-3/4"W; WEIGHS 10.3 OZ. USES STANDARD 1/2" DIA. GLUE STICKS. IRELAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
HOT MELT GLUE STICKS - 895-024.
|
|
|
|
Adhesives - Specialty
|
HEAVY DUTY GLUE GUN REACHES OPERATING TEMPERATURE IN MINUTES
|
| Hd200 Glue Gun
|
THE ADHESIVE TECH™ ELECTRIC GLUE GUN PRODUCES 410°F. FOR FAST, CONSISTENT GLUE DELIVERY:
ADVANCED ERGONOMIC DESIGN AND LARGE SOLID TRIGGER FOR COMFORTABLE USE. CAN BE STORED ON DETACHABLE, TILT-RESISTANT METAL STAND OR BY USING ATTACHED HANGING RING. 7.5"H X 9.5"L X 2"W - WEIGHS 1.2 LBS. 120V, 200W, 6' CORD, UL LISTED. USES STANDARD 1/2" DIA. GLUE STICKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
HOT MELT GLUE STICKS - 895-024.
|
|
|
|
Adhesives - Specialty
|
3M™ HI-STRENGTH 90 SPRAY ADHESIVE PROVIDES HIGH CONTACT BOND STRENGTH
|
| 3m Hi-strength 90 Contact Adhesive
|
3M™ HI-STRENGTH 90 AEROSOL ADHESIVE QUICKLY AND SECURELY BONDS HEAVIER MATERIALS:
ONE MINUTE DRY TIME - PRECISE SPRAY CONTROL - HIGH TEMPERATURE RESISTANCE. IDEAL FOR ADHERING POLYETHYLENE OR POLYPROPYLENE TO WOOD, METAL AND MANY OTHER MATERIALS. USE FOR BONDING DECORATIVE LAMINATE EDGES TO TABLES, CABINETS, SHELVING. DRIES CLEAR - 17.6 OZ. AEROSOL CAN; NEW, LOW VOC FORMULA. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Adhesives - Specialty
|
READY GRIP™ PRESSURIZED CONTACT ADHESIVE SPECIALLY FORMULATED FOR LAMINATE AND WOODWORKING
|
| Ready Grip Contact Adhesive
|
READY GRIP™ RG25 PRESSURIZED CONTACT ADHESIVE USES AN ADJUSTABLE, VARIABLE SPRAY TIP TO PRODUCE AN EVEN, CONTROLLED DISTRIBUTION OF ADHESIVE:
SPRAY ONTO BOTH SURFACES, ALLOW 2-4 MINUTES TO DRY UNTIL TACKY THEN BOND UP TO 30 MINUTES AFTER APPLICATION. QUICK TACK, FAST DRYING AND HIGH SHEAR STRENGTH. HEAT AND UV-STABLE AND WATER RESISTANT (EXTREMELY POROUS SURFACES LIKE PLYWOOD MIGHT REQUIRE TWO COATINGS). 17 OZ. AEROSOL CAN COVERS 70-80 SQ. FT. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Adhesives - Specialty
|
HOT MELT ADHESIVE IN CUT-TO-FIT SHEETS MAKES VENEERING EASIER
|
| Hot Melt Sheet 24"x96"
|
APPLYING FLEXIBLE VENEER IS A LOT SIMPLER WHEN YOU USE HOT MELT SHEET ADHESIVE:
SIMPLY CUT A SECTION TO SIZE USING A SCISSORS, PLACE THE SHEET BETWEEN THE SUBSTRATE AND VENEER AND THEN FASTEN INTO PLACE BY HEATING WITH A HOUSEHOLD IRON. GREAT FOR FAST ADHESION DURING REPAIRS OR TIMES WHEN YOU DO NOT WANT TO USE STANDARD CONTACT ADHESIVES - SOLD IN 2' X 8' ROLLS. USA. LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Specialty
|
PRE-FORMULATED, BLENDED UREA RESIN ONLY REQUIRES WATER AND MIXING FOR USE
|
| Ppr Urea Resin
|
WHEN RECONSTITUTED WITH WATER, PPR UREA RESIN POWDER PRODUCES GLUE THAT WILL HARDEN TO A STRONG, RIGID, THERMO-SET BOND WITH EXCELLENT HEAT RESISTANCE - FOLLOW MIXING INSTRUCTIONS BELOW:
5-1/2 HOUR POT LIFE, UP TO 40 MINUTE ASSEMBLY TIME, DRIES COMPLETELY IN 24 HOURS AT 70©F (TIMES DECREASE AS TEMPERATURE INCREASES). ADHESIVE CAN BE USED FOR CURVED LAMINATIONS, VENEERING OR GENERAL ASSEMBLY AT A SUGGESTED APPLICATION RATE OF 3 LBS. GLUE PER 100 SQ. FT. TYPE II WATER RESISTANCE AND EXCELLENT SANDABILITY. ONE YEAR SHELF LIFE - SOAP AND WATER CLEAN UP. USA.
|
|
|
|
Adhesives - Specialty
|
AMAZING ASSEMBLY TAPE HOLDS JOINTS FOR ASSEMBLING AND MACHINING
|
| Assembly Tape 2" X 216'
|
AMAZING BECAUSE IT STICKS TO SLICK SURFACES, ASSEMBLY TAPE HOLDS TIGHT AND ALLOWS PRE-ASSEMBLY OF PROJECTS WITHOUT LEAVING A RESIDUE:
ONE OF ITS BEST USES IS TAPING CUT LINES TO PREVENT TEAR OUT. TRANSPARENT TAPE IS 2" WIDE X 72 YARDS (216') LONG. SPECIAL PVC BACKING PROVIDES EXTREME TENSILE STRENGTH.
|
|
|
|
Adhesives - Specialty
|
INNOVATIVE 2P-10 ADHESIVE SYSTEM BONDS WOOD IN 10 SECONDS, CURES IN 30 SECONDS
|
| 2p10 Jel 2.25oz Refill
...plus other(s)
|
USING THE TWO PART FASTCAP™ 2P-10 ADHESIVE SYSTEM KIT, YOU CAN QUICKLY AND EASILY GLUE THE MOST DIFFICULT CABINETRY OR OTHER WOODWORKING JOINTS WITHOUT CLAMPING:
JUST APPLY THE GLUE, SPRAY ON THE ACTIVATOR AND STICK TOGETHER FOR A STRONG PERMANENT 4,000 PSI BOND. 2P-10 KIT INCLUDES JëL, THICK AND MEDIUM ADHESIVES FOR BONDING DIFFERENT SURFACES (2 OZ., EACH), ONE 2 OZ. CONTAINER OF ACTIVATOR FOR FASTER BONDS AND ONE 2 OZ. BOTTLE OF DEBONDER FOR REMOVING GLUE RESIDUE. KIT ALSO COMES WITH PUMP SPRAYERS, HARD SHELL CARRYING CASE, MIRCO-TIPS AND INSTRUCTIONS. PRODUCT REFILLS AVAILABLE. ACTIVATOR AVAILABLE IN CONVENIENT 12 OZ. AEROSOL CANS. MICRO-TIPS ARE USED TO LAY DOWN MICRO FINE BEADS OF GLUE - GREAT FOR FILLING CRACKS.
|
|
|
|
Adhesives - Specialty
|
PEEL & STICK SPEEDTAPE REPLACES CONTACT CEMENT IN MANY APPLICATIONS
|
| Speed Tape 1"x50'
...plus other(s)
|
PATENTED, SUPER STICKY FASTCAP™ SPEEDTAPE IS A HIGH STRENGTH, PRESSURE SENSITIVE ADHESIVE THAT COMES ON A ROLL. ALL YOU DO IS PEEL OFF THE LINER AND STICK IT INTO PLACE - NO MESS AND YOU GET A PERMANENT BOND:
CLEAR, DOUBLE SIDED TAPE IS GREAT FOR APPLYING EDGEBANDING, LAMINATING, VENEERING, PUTTING UP TRIM OR MOLDING AND MUCH, MUCH MORE. AVAILABLE IN 1" AND 6-1/2" WIDE X 50' ROLLS - APPROXIMATELY 4 MILS THICK.
|
|
|
|
Adhesives - Specialty
|
TITEBOND® 811 ADVANTAGE ADHESIVE OFFERS WOOD FLOORING INSTALLATION OPTIONS
|
| 811 Wood Flooring Adhesive-gal
|
TITEBOND® 811 ADVANTAGE URETHANE WOOD FLOORING ADHESIVE IS A PROFESSIONAL PRODUCT THAT PROVIDES THE OPTION OF INSTALLING FLOORING USING THE "WET LAY" (GLUE AND INSTALL AS YOU GO) OR *"FLASHED" (APPLY GLUE FIRST, INSTALL FLOORING LATER) METHOD, DEPENDING UPON REQUIREMENTS:
MOISTURE CURE, NON-SLUMP FORMULA TROWELS EASILY AND WILL NOT CAUSE DIMENSIONAL CHANGES IN FLOORING. EXCELLENT BOND STRENGTH. SUITABLE FOR ABOVE-, ON- AND BELOW-GRADE USE. CONTAINS NO WATER - UNAFFECTED BY FREEZING TEMPERATURES. DEPENDING UPON INSTALLATION, A ONE GALLON CONTAINER WILL COVER FROM 30-65 SQ. FT. CLEAN-UP WET USING MINERAL SPIRITS. USA. *NOTE: 30-MINUTE "FLASH" TIME; DO NOT TROWEL MORE ADHESIVE THAN CAN BE COVERED WITH FLOORING IN TWO HOURS.
|
|
|
|
Adhesives - Specialty
|
TITEBOND® CLEAR PRESSURE SENSITIVE ADHESIVE
|
| Pressure Sensitive Adhesive-gal
|
IDEAL FOR PAPER AND FELT BACKED VINYL, VINYL COMPOSITION AND CARPET TILES, TITEBOND® CLEAR PRESSURE SENSITIVE ADHESIVE IS A LATEX BASED PRODUCT THAT COMBINES FAST TACK WITH A LONG - UP TO 72 HOURS - WORKING TIME:
WATER RESISTANT. FREEZE/THAW STABLE. CLEAN UP WITH WATER; USE MINERAL SPIRITS TO REMOVE DRIED EXCESS. GALLON CONTAINER. USA
|
|
|
|
Adhesives - Specialty
|
TITEBOND® HEAVY DUTY CONSTRUCTION ADHESIVE
|
| Hd Construction Adhesive-10.5 Oz
...plus other(s)
|
DESIGNED FOR A WIDE RANGE OF CONSTRUCTION APPLICATIONS INCLUDING WET, FROZEN AND TREATED LUMBER, TITEBOND® HEAVY DUTY CONSTRUCTION ADHESIVE IS ALSO IDEAL FOR METAL, BRICK, CONCRETE, CERAMICS AND MOST LARGE PANEL-TYPE SUBSTRATES - 20-30 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
FILLS GAPS AND IRREGULARITIES TO PROVIDE A MORE SOLID BACKUP SURFACE. SCRAPE OFF DRIED EXCESS; REMOVE RESIDUE WITH MINERAL SPIRITS. 10.5 OZ. AND 29 OZ. CARTRIDGES. USA.
|
|
|
|
Adhesives - Specialty
|
TITEBOND® SOLVENT FREE CONSTRUCTION ADHESIVE
|
| Solvent Free Const.adhesive 10.5oz
...plus other(s)
|
IDEAL FOR COMMON BUILDING MATERIALS INCLUDING TRIM, PANELING, DRYWALL, FOAMBOARD, TUB SURROUNDS, METAL, MASONRY AND WET, FROZEN AND TREATED LUMBER, TITEBOND® SOLVENT FREE CONSTRUCTION ADHESIVE IS ENVIRONMENTALLY SUPERIOR AND CONTAINS NO OZONE-DEPLETING CHEMICALS - 20 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
WATER CLEAN UP WHEN WET; SCRAPE OFF DRIED EXCESS. 10.5 OZ. AND 29 OZ. CARTRIDGES. USA.
|
|
|
|
Adhesives - Specialty
|
TITEBOND® COVE BASE ADHESIVE
|
| Solv.free Cove Base Adh. 10.5 Oz.
...plus other(s)
|
FORMULATED FOR EASY INSTALLATION OF RUBBER AND VINYL COVE BASES AND ACOUSTICAL TILES, TITEBOND® COVE BASE ADHESIVE OFFERS EXCELLENT ADHESION TO DRYWALL, PLASTER, PAINT, WALLPAPER, PANELING AND CERAMIC TILE - 5-10 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
FAST GRAB, "NO SAG" INSTALLATION. WATER CLEANUP. 11 OZ. AND 29 OZ. CARTRIDGES. USA
|
|
|
|
Adhesives - Specialty
|
TITEBOND® INTERIOR/EXTERIOR CONSTRUCTION ADHESIVE
|
| Interior/exterior Const.adh.10.5oz
...plus other(s)
|
A VERSATILE WOOD, PANELING, DRYWALL, CERAMIC TILE, METAL, FOAMBOARD AND TUB SURROUND ADHESIVE, TITEBOND® INTERIOR/EXTERIOR CONSTRUCTION ADHESIVE IS EFFECTIVE FOR INSTALLING FOAM INSULATION AND PANELS - 30 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
SCRAPE OFF DRIED EXCESS; REMOVE RESIDUE WITH MINERAL SPIRITS. 10.5 OZ. AND 29 OZ. CARTRIDGES. USA.
|
|
|
|
Adhesives - Specialty
|
TITEBOND® PREMIUM POLYURETHANE CONSTRUCTION ADHESIVE
|
| Polyurethane Const.adh. 10.5 Oz.
...plus other(s)
|
PROVIDES EXCEPTIONALLY STRONG BONDS ON VIRTUALLY ALL COMMON BUILDING MATERIALS INCLUDING WET, FROZEN AND TREATED LUMBER, TITEBOND® PREMIUM POLYURETHANE CONSTRUCTION ADHESIVE IS ALSO IDEAL FOR USE WITH NON-POROUS SUBSTRATES - APPROXIMATE 60 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
USE INSIDE OR OUTDOORS, EVEN IN SEVERE WEATHER. SCRAPE OFF DRIED EXCESS; REMOVE RESIDUE WITH MINERAL SPIRITS. 10.5 OZ. AND 29 OZ. CARTRIDGES. USA.
|
|
|
|
Adhesives - Specialty
|
VERSATILE H. BEHLEN® SPRAY ADHESIVE CAN BE USED FOR TEMPORARY AND PERMANENT BONDS
|
| Master Spray Adhesive
|
H. BEHLEN® MASTER™ SPRAY ADHESIVE IS AN EXCELLENT CHOICE FOR THE TEMPORARY BONDING OF PAPER PATTERNS TO WOOD, PLASTIC AND LEATHER - ONCE CUTTING IS COMPLETE, JUST PEEL OFF THE PATTERN AND CONTINUE:
CAN ALSO BE USED TO CREATE PERMANENT BONDS BETWEEN PAPER, FABRIC, LEATHER, WOOD, PLASTIC AND URETHANE FOAM. 13 OZ. AEROSOL CAN. USA.
|
|
|
|
Adhesives - Specialty
|
TITEBOND® WATERPROOF POLYURETHANE GLUE GIVES YOU A LONGER OPEN TIME
|
| Titebond Polyurethane 8oz
...plus other(s)
|
TITEBOND POLYURETHANE GLUE IS A BREAKTHROUGH IN ADHESIVE TECHNOLOGY. IT IS THE ONLY PROFESSIONAL STRENGTH POLYURETHANE GLUE TO COMBINE A LONG 20 MINUTE WORKING TIME WITH A SHORT 45 MINUTE CLAMP TIME. THIS VERSATILE, PROFESSIONAL-STRENGTH GLUE IS SPECIFICALLY FORMULATED FOR MULTI-PURPOSE APPLICATIONS.
IN ADDITION TO ITS SUPERIOR WOOD-TO-WOOD PERFORMANCE, TITEBOND POLYURETHANE GLUE IS IDEAL FOR METALS, CERAMICS, MOST PLASTICS, HPL, CORAIN, STONE AND OTHER POROUS/NON-POROUS MATERIALS. IT IS READY-TO-USE, OFFERS EXCELLENT SANDABILITY AND IS UNAFFECTED BY FINISHES. WORKS WELL EVEN ON EXOTIC OR OILY WOODS.
100% WATERPROOF (PASSES ANSI TYPE I & II WATER-RESISTANCE TESTING) BONDS VIRTUALLY EVERYTHING EXPANDS TO FILL GAPS EXCELLENT SANDABILITY SOLVENT FREE
|
|
|
|
Adhesives - Specialty
|
J.E. MOSER'S® HIDE GLUES
|
| Pearl Hide Glue
...plus other(s)
|
TO PREPARE J.E. MOSER'S® HIDE GLUES MIX ABOUT 50/50 WITH COOL WATER AND WARM TO APPROXIMATELY 140° F. BEFORE USE:
849-755 - PEARL HIDE GLUE IS AN ALL PURPOSE GLUE SUITABLE FOR MOST APPLICATIONS. 893-961 - GROUND HIDE GLUE IS A PURER GRADE FOR APPLICATIONS REQUIRING HIGHER TACK AND STRONGER BOND. BOTH ARE STRONGER THAN COMMERCIALLY PREPARED LIQUID HIDE GLUES WHEN PROPERLY MIXED. ALTHOUGH THESE HIDE GLUES PROVIDE QUICK GRAB, THEY ALLOW REPOSITIONING FOR AN EXTENDED PERIOD. NOTE: WHEN GLUING SOFT WOODS, 100-150 PSI CLAMPING PRESSURE IS RECOMMENDED - 175-250 PSI FOR HARDWOODS.
849-783 - THE THERMOSTAT EQUIPPED ELECTRIC GLUE POT WILL MAINTAIN 140° TO 150° F. AND NOT BURN GLUE: REMOVABLE, ONE QUART SPUN ALUMINUM CONTAINER WITH WIPER ROD INCLUDED FOR EASY CLEANING. 115V; UL APPROVED.
|
|
|
|
Adhesives - Specialty
|
GROUND RABBIT SKIN GLUE SAVES YOU TIME AND EFFORT
|
| Ground Rabbit Skin Glue
|
A DOMESTIC HIDE GLUE, RABBIT SKIN GLUE IS DRIED AND GROUND AND READY TO USE:
JUST ADD HOT WATER AND FOLLOW THE DIRECTIONS. MIX WITH GILDER'S WHITING AND ADDITIONAL WATER TO FORM A MOLDABLE GESSO FOR REPAIRING DAMAGE TO ORNATE ANTIQUE PICTURE FRAMES; ALSO USED BY GILDERS. SOLD IN 1 LB. CONTAINERS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
849-909 - GILDER'S WHITING.
|
|
|
|
Adhesives - Specialty
|
FOR THE PERSON WHO LIKES TO DO THINGS THE OLD WAY - TRADITIONAL RESTORATION MATERIALS
|
| Yellow Beeswax Prills
...plus other(s)
|
THESE MATERIALS ARE OFFERED FOR RESTORERS AND ARTISTS WHO ONLY WANT TO USE TRADITIONAL METHODS IN MIXING AND PRODUCING THEIR OWN FINISHING MATERIALS:
DISSOLVE OR MIX THE SOLID MATERIALS WITH ALCOHOL OR OTHER PRODUCTS TO PRODUCE TRADITIONAL PIGMENT COLORS OR THE FINEST SPIRIT VARNISHES AND LACQUERS OR SPIRIT GLAZES FOR FRENCH POLISHING.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Specialty
|
ALL HOT MELT GLUES ARE NOT CREATED EQUAL
|
| 10" High Strength Glue Stk
...plus other(s)
|
SELECT FROM THREE DIFFERENT HOT MELT GLUES TO MATCH THE EXACT DEMANDS OF YOUR APPLICATION:
ECONOMY CLEAR IS AN EXCELLENT, ALL PURPOSE GLUE THAT WORKS BEST ON POROUS MATERIALS - 35 TO 45 SECOND WORKING TIME. GENERAL PURPOSE CLEAR IS FOR NON-POROUS MATERIALS LIKE PLASTICS AND GLASS - 30 TO 40 SECOND WORKING TIME. HIGH-PERFORMANCE TAN HAS A 20 TO 30 SECOND WORKING TIME AND WORKS WELL WITH FABRIC, LEATHER UPHOLSTERY, ALL WOODS AND PARTICLE BOARD. 4" OR 10" LONG GLUE STICKS ARE 1/2" DIA. APPROXIMATELY 45, 4" STICKS PER LB.; 18, 10" STICKS PER LB.
|
|
|
|
Adhesives - Specialty
|
ALL PURPOSE WHITE, HOT MELT GLUE STICKS ARE STANDARD 1/2" DIAMETER
|
| White 4" Glue Sticks
|
MILKY WHITE, HOT GLUE STICKS ARE AN EXCELLENT, ALL PURPOSE GLUE THAT WORKS BEST ON POROUS MATERIALS:
35 TO 40 SECOND WORKING TIME. APPROXIMATELY 45 STICKS PER 1 LB. PACKAGE.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Specialty
|
J.E. MOSER'S® PREMIUM WATERPROOF POLYURETHANE GLUE BONDS A VARIETY OF MATERIALS
|
| Critical Bond-17oz.
...plus other(s)
|
CRITICAL BOND™ IS ONE OF THE FINEST INDUSTRIAL ADHESIVES WE'VE TESTED AND COSTS LESS THAN MANY COMPARABLE BRANDS:
USE TO BOND WOOD, STONE, METAL, CERAMICS, PLASTICS, GLASS AND MORE. CREATES A GAP FILLING, WATERPROOF, STRUCTURAL BOND WITHOUT MIXING (NOT FOR SUBMERSIBLE APPLICATIONS). SAFE TO USE INDOORS AND OUTDOORS AND WILL NOT EXPAND OR SHRINK AFTER HARDENING. FLOWS AND SPREADS EASILY - NORMALLY REQUIRES JUST A THIN FILM ON ONE SURFACE BEFORE CLAMPING. TOTAL ASSEMBLY TIME IS 25 MINUTES; CLAMP TIME IS 1-4 HOURS. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® II DARK WOOD GLUE IS MADE FOR DARKER WOOD
|
| 16 Oz Titebond Ii Dark
...plus other(s)
|
TITEBOND® II DARK WOOD GLUE IS A DYED VERSION OF TITEBOND II WOOD GLUE:
DARKER COLOR HELPS MAKE GLUE JOINTS IN DARK WOOD SUCH AS WALNUT LESS VISIBLE. SO WATER RESISTANT, IT'S THE ONLY ONE-PART GLUE TO PASS ANSI/HPVA TYPE II WATER-RESISTANCE SPECIFICATIONS (NOT INTENDED FOR CONTINUOUS SUBMERSION). ASSEMBLY TIME: 5 MINUTES. SET TIME: 24 HOURS. USA.
|
|
|
|
to see Sub Categories)
