|
|
|
Finishes - Fillers
|
EASILY REPAIR OR REBUILD WOOD WITH WOODFIL® HAND-MIXABLE EPOXY
|
| Walnut Epoxy Stick
...plus other(s)
|
TWO-PART, HAND-MIXABLE WOODFIL® EPOXY CAN BE USED TO FILL NAIL HOLES, CHIPS, BUTT JOINTS OR EVEN HOLES DRILLED OFF LOCATION:
CUT OFF AMOUNT REQUIRED, KNEAD INTO UNIFORM COLOR AND PRESS INTO AREA TO BE FILLED. 15-25 MINUTE WORKING TIME - SAND, FILE, DRILL, MACHINE, PAINT OR STAIN AFTER 60 MINUTES. COMPLETELY FILLS DAMAGED AREAS AND WILL NOT SHRINK. AVAILABLE IN FIVE WOOD-TONE COLORS AND WHITE - CHANGE COLOR BY INTERMIXING OR ADDING OIL-BASED STAIN. SOLVENT RESISTANT, NON-VOLATILE WITH A COMPRESSION STRENGTH OF 10,000-14,000 PSI. 2 OZ. CONTAINERS. USA.
|
|
|
|
Finishes - Fillers
|
MIRACLE LATEX WOOD FILLER
|
| Miracle Wood Latex Filler
|
MIRACLE WOOD®-2 FILLER TAKES WOOD STAIN FAR BETTER THAN ANY OTHER LATEX FILLER WE'VE TESTED:
NON-TOXIC, WATER-BASED LATEX FORMULA CLEANS-UP EASILY AND IS SOLVENT FREE. NO NOXIOUS FUMES - USE ON NAIL HOLES, CRACKS, SPLIT EDGES; INDOORS AND OUT. MOLDABLE, BUT DRIES HARD. 8 OZ. CONTAINER."
|
|
|
|
Finishes - Fillers
|
PREMIUM STRENGTH CAULKING SEALS OUT MOISTURE AND AIR TO IMPROVE HOME ENERGY EFFICIENCY
|
| Redi Set
...plus other(s)
|
PROFESSIONAL STRENGTH UV GUARD® PREMIUM CAULKING FORMS A POWERFUL ADHESIVE BOND THAT REMAINS FLEXIBLE, WATER RESISTANT AND WEATHER TIGHT FOR YEARS:
PAINTABLE WHEN DRY. SPECIFICALLY SUITED FOR LOG HOME JOINTS, COATED OR UNCOATED WOOD, SHEET METAL, MASONRY AND STUCCO. CONTAINS UV BLOCKERS AND STABILIZERS AND RESISTS TEMPERATURE EXTREMES. WHEN CURED, SPANS GAPS UP TO 2". SAFE FOR INTERIOR AND EXTERIOR USE. 1/4" WIDE X 180 LIN. FT. COVERAGE/30 OZ. TUBE - SKINS OVER IN 30 MINUTES; COMPLETELY CURED IN 48 HOURS.
FOR ADDITIONAL PROTECTION, REDI SET™ BETWEEN LOG SEALANT IS DESIGNED FOR USE BETWEEN LOG COURSES DURING STACKING:
USE ON SWEDISH COPE, SINGLE AND DOUBLE TONGUE & GROOVE AND FLAT-ON-FLAT LOG APPLICATIONS. FORMULATED FROM HIGHEST QUALITY, PURE ACRYLIC LATEX, THE PRODUCT FORMS A PERMANENT BOND THAT REMAINS FLEXIBLE, WATER RESISTANT AND WEATHER TIGHT. NATURAL PINE COLOR. SKINS OVER IN 1-2 HOURS; COMPLETELY CURED IN 2-4 WEEKS.
BOTH ARE EASY TO APPLY AND CLEAN UP WITH WATER. DO NOT APPLY BELOW 40°F. OR WHEN RAIN IS IMMINENT. NON-TOXIC. MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA.
|
|
|
|
Finishes - Fillers
|
GRAIN FILLER IS THICK FOR EASY HAND APPLICATION AND DRIES CLEAR
|
| Crystalac Wood Grain Filler Qt
|
|
GET A GLASS SMOOTH FINISH BY SIMPLY APPLYING CRYSTALAC® CLEAR WATERBOURNE WOOD GRAIN FILLER TO THE WOOD USING A PUTTY KNIFE OR BRUSH. THEN DRAG OFF THE EXCESS USING A SQUEEGEE OR OLD CREDIT CARD. THIS FILLS THE OPEN PORES IN HARD TO FINISH WOOD SUCH AS MAHOGANY, MAPLE, OAK AND OTHERS. SINCE IT DRIES CLEAR IT ALLOWS THE NATURAL LOOK OF THE WOOD TO POP THROUGH. IF YOU WANT TO DARKEN OR CHANGE THE GRAIN COLOR JUST ADD A SQUIRT OF TINTS-ALL UNIVERSAL COLORANT, AVAILABLE IN SEVERAL WOOD TONE COLORS. COMPATIBLE WITH WATERBORNE OR SOLVENT-BASED FINISHES AND STAINS. USA
|
|
|
|
Finishes - Fillers
|
WOOD-TEX® SYNTHETIC WOOD FILLER DRIES FAST SO IT IS IDEAL FOR ASSEMBLY OPERATIONS
|
| Red Birch Synthetic Wood
...plus other(s)
|
GENUINE WOOD FLOUR COMBINED WITH SPECIAL BONDING AGENTS MAKES WOOD-TEX® SYNTHETIC WOOD HANDLE LIKE WOOD ITSELF. IT'S WATER AND WEATHER RESISTANT. STAIN IT, SAND IT, DRILL IT, OR PLANE IT - JUST LIKE REAL WOOD:
FAST SETTING (7 TO 15 MINUTES) WITH MINIMUM SHRINKAGE. CREAMY CONSISTANCY COMES OFF OF THE BLADE SMOOTHLY. TAKES STAINS AND PAINTS EVENLY WITH MINIMAL SANDING. USE ON VIRTUALLY ANY TYPE OF WOOD INSIDE OR OUTSIDE. THE SOLVENT IS IDEAL FOR THINNING AND CLEAN-UP. USA.
|
|
|
|
Finishes - Fillers
|
BEHLEN B744-0416 POR-O-PAC GRAIN FILLER
|
| Pore-o-pac Mahogany
...plus other(s)
|
PORE-O-PAC™ BUILDS A PERFECTLY SMOOTH SURFACE FOR SUBSEQUENT FINISH COATS ON OPEN GRAIN WOODS.
APPLY WITH A PUTTY KNIFE OR THIN WITH PORE-O-PAC™ SOLVENT FOR BRUSH AND SPRAY APPLICATIONS. THREE COLORS TO CHOOSE FROM; NATURAL CAN BE MIXED WITH JAPAN OR MASTER™ COLORS. REMOVE EXCESS WITH BURLAP. ONE QUART CANS. USA.
|
|
|
|
Finishes - Fillers
|
FAMOWOOD® WOOD FILLER DRIES FAST AND SANDS EASILY
|
| Solvent Free Natural Filler 3.25 Oz.
...plus other(s)
|
FAMOWOOD® #1 PROFESSIONAL WOOD FILLERS ARE FACE GRADE FILLERS WITH A VERY HIGH SOLIDS CONTENT FOR EASY SMOOTHING AND EASY SANDING:
SOLVENT BASED FAMOWOOD® FILLER HAS BEEN THE PROS CHOICE FOR OVER 50 YEARS:
FAST DRY TIME: USUALLY DRY IN 15 MINUTES AND READY TO BE SAWED, DRILLED, SANDED, PLANED OR NAILED. HIGH SOLIDS CONTENT: SINCE IT IS MADE OF WOOD IT ACCEPTS STAINS NATURALLY. MINIMAL SHRINKAGE: STRONGER THAN THE WOOD IT REPLACES WITH LITTLE TO NO SIGNS OF SHRINKAGE. WATER AND WEATHER RESISTANT: USE INDOORS OR OUT. USE FAMOWOOD® SOLVENT TO RECONSTITUTE OLDER OR THICKENED FILLER-ADD A SMALL AMOUNT BEFORE SEALING CAN TO KEEP FILLER READY FOR NEXT USE.
SOLVENT FREE FAMOWOOD® FILLER HAS ALL THE SAME QUALITIES OF SOLVENT BASED FILLER BUT IS FREE FROM SOLVENT FUMES, LOW IN TOXICITY, MEETS VOC REGULATIONS, HAS MINIMAL SHRINKAGE, IS NON-FLAMMABLE AND CLEANS UP WITH WATER:
AVAILABLE IN ONE PINT, 1/4 PINT, AND 3-1/4 OZ. TUBES. STORE ABOVE 45° AND IT LASTS OVER SIX MONTHS. USA
NOTE: FACE GRADE FILLERS ARE NOT DESIGNED TO REPLACE OR REPAIR STRUCTURAL INTEGRITY - 180 DAY LIMITED MANUFACTURER'S WARRANTY.
|
|
|
|
Finishes - Fillers
|
J.E. MOSER'S 83338 WOOD EPOXY PASTE KIT
|
| Je Moser Epoxy Paste Kit
...plus other(s)
|
WHETHER RESTORING A WOOD FLOOR, REPLACING MISSING OR CHIPPED CORNERS AND EDGES OR REPAIRING AGED OR ROTTING WOODWORK, YOU DONT WANT TO HAVE TO REDO THE JOB AS SOON AS YOU TURN AROUND. J.E. MOSERS® EPOXY PASTE OUTPERFORMS OTHERS WE HAVE TESTED IN DURABILITY, LOW ODOR AND EASE OF USE - USE INDOORS OR OUTSIDE:
SIMPLY MIX TOGETHER EQUAL AMOUNTS OF PARTS A AND B AND START FILLING USING A PUTTY KNIFE OPEN TIME IS MORE THAN 45 MINUTES. LET DRY OVERNIGHT, SAND AND THEN FINISH OR PAINT (A COAT OF LIQUID PETRIFIER 903-986, BRUSHED ONTO ROTTED AREAS TO STABILIZE THE WOOD BEFORE FILLING, IS RECOMMENDED). PASTE DRIES TO A NATURAL WOOD TONE AND ACCEPTS STAIN. CAN ALSO BE TINTED DURING MIXING BY ADDING A SMALL AMOUNT OF TINTSALL© OR J.E. MOSERS® FRESCO COLORS. USA."
|
|
|
|
Finishes - Fillers
|
J.E. MOSER'S LUMBER PUTTY EPOXY WOOD FILLER STICK
|
| Je Moser's Epoxy Stick
...plus other(s)
|
|
FILLS HOLES, ROTTEN WOOD, GOUGES AND SCRATCHES, JUST SLICE OFF WHAT YOU NEED, BLEND TO ONE COLOR IN YOUR HANDS AND PRESS INTO ANY WOOD THAT NEEDS PATCHING. CAN BE SANDED, SHAPED, DRILLED OR SAWED. 2 OZ. STICK. OPTIONAL SET OF FOUR SPATULAS (915-338) MAKES PATCHING FASTER AND EASIER."
|
|
|
|
Finishes - Fillers
|
MOSER'S FILL-IT WOOD FILLER
|
| Je Moser's Fill-it
...plus other(s)
|
SOLVENT FREE, NON-TOXIC J.E. MOSER'S® FILL-IT™ WON'T SHRINK, CRACK OR FLAKE WHEN DRY, PLUS IT EXCELS AT ACCEPTING STAIN TO MATCH THE WOOD AROUND IT.
EASY INTERIOR OR EXTERIOR USE - EASY CLEAN-UP. 8 FL. OZ. CAN. 913-217 - OPTIONAL 2" WIDE PLASTIC PUTTY KNIFE HAS JUST THE RIGHT FLEXIBILITY TO FIRMLY PRESS IN FILLERS AND PUTTY (NOT FOR USE WITH FURNITURE STRIPPERS)."
|
|
|
|
Finishes - Fillers
|
FAMOWOOD® TROWEL GRADE GRAIN FILLER
|
| Fir/maple Grain Filler Tr/gr
...plus other(s)
|
SMOOTH CONSISTENCY MAKES FAMOWOOD® GRAIN FILLER EASY TO APPLY WITH A TROWEL OR BROAD KNIFE:
DOESN'T BLISTER OR PULL OUT OF CRACKS, SEAMS AND KNOTS LIKE OTHER FILLERS. AN ACRYLIC WATER BASE MEANS IT DRIES QUICKLY SO YOU CAN FILL AND SAND WITHIN A FEW HOURS (OIL BASED FILLERS HAVE TO DRY A MINIMUM OF 24 HOURS). DRIED BOND STRENGTH IS SO HIGH IT WILL NOT CRACK OR PULL AWAY FROM THE WOOD. NON-TOXIC AND CLEANS UP WITH WATER. AVAILABLE IN GALLONS, WHICH COVER 200-400 SQUARE FEET. CAN BE TINTED FOR EXACT COLOR MATCHING. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
J.E. MOSER'S® WIZARD TINTS™ - 913-560.
|
|
|
|
Finishes - Fillers
|
MAKE UNIQUE INLAYS IN WOOD OR REPAIR METAL WITH LAB-METAL™
|
| Lab-metal
...plus other(s)
|
LAB-METAL™ IS A READY TO USE METAL REPAIR PUTTY, DENT FILLER AND PATCHING COMPOUND THAT WORKS EQUALLY WELL FOR MAKING METAL INLAYS IN WOODWORKING PROJECTS:
NO MIXING OF TWO PARTS, MEASURING OR HEAT REQUIRED. POURS AND SPREADS EASILY THEN QUICKLY HARDENS INTO METAL THAT'S AS HARD AS BRASS. ADHERES TO ANY CLEAN AND DRY METAL, WOOD, GLASS, PLASTER, PORCELAIN OR HARD PLASTIC SURFACE. CURED LAB-METAL™ CAN BE MILLED, GROUND AND FILED JUST LIKE ANY METAL AND IT WITHSTANDS TEMPERATURES UP TO 350°F. WILL NOT SHRINK OR CRACK (NOT INTENDED TO BE USED AS AN ADHESIVE.) THIN WITH LAB-SOLVENT™ AND IT CAN BE BRUSHED OR SPRAYED ON TO PROVIDE A METALLIC COATING. LAB-SOLVENT™ ALSO CUTS GREASE, OIL AND DIRT AND IS RECOMMENDED AS A METAL CLEANER AND DEGREASER TO PREPARE SUFACES FOR LAB-METAL™. A LITTLE SOLVENT POURED INTO THE CAN BEFORE CLOSING PREVENTS HARDENING.
|
|
|
|
Finishes - Fillers
|
J.E. MOSER'S 175 GRAIN-FIL GRAIN FILLER
|
| Moser's Grain-fil
|
COMPATIBLE WITH OIL OR WATER BASED STAINS AND FINISHES, J.E. MOSER'S® GRAIN-FIL CLEAR PASTE WOOD GRAIN FILLER FOR A GLASS SMOOTH FINISH.
APPLY WITH A BRUSH, PUTTY KNIFE, OR SPRAY GUN - DRIES IN ABOUT 30-45 MINUTES. TINTS·ALL© UNIVERSAL TINTING COLORS WILL ADD COLOR AND MATCH OR ACCENT GRAIN IF DESIRED (TRANSPARENT GRAIN FILLER MAY LOOK SLIGHTLY HAZY ON SOME DARKER WOODS, SO IT IS ADVISABLE TO ADD A COLORANT TO THE FILLER WHEN USED OVER WOOD SUCH AS WALNUT OR DARK COLORANTS). 1 QT. CONTAINER. USA
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
TINTS·ALL© UNIVERSAL TINTING COLORS - 928-091."
|
|
|
|
Finishes - Fillers
|
EPOXY PUTTY STICKS: THE NO FUSS WAY TO USE EPOXY
|
| Metal Epoxy Stick
...plus other(s)
|
EPOXY PUTTY STICKS CONTAIN PUTTY-LIKE HARDENER AND EPOXY ROLLED INTO ONE:
JUST TEAR OFF THE AMOUNT YOU NEED AND MIX THE PUTTY TO A UNIFORM COLOR. 949-755 - PC-METAL™ CAN BE USED TO REPLACE MISSING AND RUSTED METAL; EVEN USE IT TO FILL DENTS; 3 MINUTE OPEN TIME. 949-762 - PC-CRETE™ REPAIRS ANY MASONRY OR CONCRETE SURFACE; 3 MINUTE OPEN TIME. 949-769 - PC-MARINE™ CURES ABOVE OR UNDERWATER (EVEN SALTWATER); IDEAL FOR SMALL REPAIRS ON HULLS, TANKS AND POOLS; 20 MINUTE OPEN TIME. 951-590 - BUY ALL THREE AT ONE TIME AND SAVE! 2 OZ. TUBES; ALL CURE TO FULL WORKING STRENGTH IN 60 MINUTES. USA.
|
|
|
|
Finishes - Stains & Colorants
|
J.E. MOSER'S 856606 FRESCO COLORS
|
| English Drop Black Fresco Colors
...plus other(s)
|
J. E. MOSER'S® FRESCO COLORS ARE SUPER REFINED, PURE DRY PIGMENTS DESIGNED FOR COLORING, MIXING AND TINTING MOST PAINT, ENAMEL, EPOXY, FILLERS, SHELLAC, STAINS, LACQUER, VARNISH OR OTHER LIQUIDS:
VERY USEFUL FOR TOUCH UP WORK WHEN QUICK COLOR MATCHING OR CHANGES ARE REQUIRED. BECAUSE OF THE FINENESS OF THEIR TEXTURE, THEY MIX READILY TO PRODUCE A SMOOTH, OPAQUE FINISH. COMPATIBLE WITH MOST OIL, SOLVENT AND WATER BASED PRODUCTS - EVEN CONCRETE. 1 OZ., 4 OZ. OR 8 OZ. CONTAINERS (PLEASE TEST FOR COMPATIBILITY BEFORE USING). USA."
|
|
|
|
Finishes - Stains & Colorants
|
J.E. MOSER'S JAPAN COLORS
|
| Drop C. Black Japan Color
...plus other(s)
|
MADE FROM PURE, BASIC PIGMENTS THAT ARE FINELY MILLED AND SUSPENDED IN A VARNISH-LIKE MEDIUM, J.E. MOSER'S® JAPAN COLOR IS HIGHLY CONCENTRATED, MAKING IT IDEAL FOR TINTING PAINTS AND STAINS:
ALSO PERFECT FOR ANTIQUING, TOUCH UP AND DECORATIVE STENCILING. COLORS ARE EXCELLENT FOR MIXING WITH WOOD FILLER TO PRODUCE DESIRED COLOR. DRY TO A FLAT LUSTER AND CONTAIN NO LEAD. NOTE: DO NOT ADD TO WATER BASED PAINTS OR FINISHES. USA."
|
|
|
|
Finishes - Stains & Colorants
|
J.E. MOSER'S WIZARD TINT ANILINE DYES
|
| Honey Amber Wizard Tint
...plus other(s)
|
J.E. MOSER'S® WIZARD TINTS™ ARE EXTREMELY LIGHTFAST, SOLUBLE IN WATER OR ALCOHOL AND CAN BE USED TO EITHER MAKE A STAIN OR TINT SHELLAC AND WATER-BASED COATINGS - WILL ALSO TONE SOLVENT-FREE WOOD FILLER:
USED IN ANY LEVEL OF CONCENTRATION, WIZARD TINTS™ ARE ONE OF THE MOST VERSATILE DYE PRODUCTS ON THE MARKET. 2 OZ. DROPPER BOTTLES ENSURE PRECISE CONTROL IN STAIN FORMULATION (NOT FOR EXTERIOR USE). 913-581 - SILVER GRAY TINT IS LIMITED TO QUANTITIES ON HAND. USA."
|
|
|
|
Finishes - Stains & Colorants
|
TINTS-ALL COLORANT CHANGES THE COLOR OF MOST FILLER, FINISH OR STAIN IN SECONDS
|
| Tintsall Yellow Ochre
...plus other(s)
|
TINTS-ALL© UNIVERSAL TINTING COLORANTS (UTC) WERE ORIGINALLY FORMULATED TO TINT PAINT BUT WILL TINT JUST ABOUT ANY MEDIUM - WATER-BASED, LATEX, ALKYD, OIL BASE, ACRYLIC OR POLYVINYL PRODUCTS. ADD A FEW DROPS FOR A LITTLE COLOR OR MORE TO CREATE YOUR OWN CUSTOM STAIN OR FINISH:
ALSO WORKS WITH MOST WOOD FILLERS, FINISHES, TWO-PART EPOXIES AND EVEN CONCRETE. ADD IN SMALL QUANTITIES AND MIX UNTIL DESIRED COLOR IS ATTAINED (NO MORE THAN 8 OZ. PER GALLON). TEN DISTINCTIVE LEAD-FREE COLORS TO CHOOSE FROM IN 8 FL. OZ. SQUEEZE BOTTLES (KEEP ONE OF EACH ON HAND SO YOU ALWAYS HAVE JUST THE RIGHT COLOR). PLEASE TEST FOR COMPATIBILITY BEFORE USING. USA.
NOTE: NOT AVAILABLE IN CALIFORNIA
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.