|
|
|
Abrasives - Accessories/other
|
MITCHELL'S SANDING CORD AND TAPE
|
| .055" Cord Roll (50ft)
...plus other(s)
|
HANDY 50 FOOT SPOOLS OF 150-GRIT ALUMINUM OXIDE ABRASIVE TAPE OR CORD MAKE IT POSSIBLE TO SAND THOSE "NEAR TO IMPOSSIBLE PLACES" WITH EASE:
EXCELLENT FOR SANDING HOLES, INSIDE DIAMETERS, TURNINGS AND IRREGULAR SHAPES HANDY 50 FOOT SPOOLS OF 150-GRIT ALUMINUM OXIDE ABRASIVE TAPE OR CORD MAKE IT POSSIBLE TO SAND THOSE "NEAR TO IMPOSSIBLE PLACES" WITH EASE:
EXCELLENT FOR SANDING HOLES, INSIDE DIAMETERS, TURNINGS AND IRREGULAR SHAPES. ESPECIALLY USEFUL FOR LATHE, CARVING OR REFINISHING WORK. 0.005" DIA. CORD; 3/16" WIDE TAPE. ALSO USEFUL FOR AUTO BODY REPAIRS, PLUMBING AND METAL WORKING. A MUST FOR EVERY TOOL KIT!
|
|
|
|
Abrasives - Misc/flapwheel
|
4" FLAP SANDER"
|
| 80 Grit Sanding Wheel
...plus other(s)
|
RESIN BOND, CLOTH BACKED ALUMINUM OXIDE REMOVES STOCK FAST, YET DOESN'T LEAVE DEEP SCRATCH MARKS. 4" FLAP SANDER ALSO WORKS WELL ON FLAT AREAS AND IS FINE FOR WET SANDING, TOO. TRY IT ON CARVINGS OR MOLDINGS:
FOUR GRITS TO SELECT FROM; 4" DIA. DISCS ARE ABOUT 1" THICK; SLASHED ABRASIVE MOLDS TO DIFFERENT SHAPES. DUE TO HEAVY BACKING, IT'S A GOOD IDEA TO BREAK IN SANDER EDGES ON SOMETHING FIRM BEFORE STARTING A CONTOURED PIECE. THIS ENSURES THAT EDGES FLUFF UP AND THE ABRASIVE STRIPS BECOME PROPERLY ORIENTED. 3,200 RPM MAXIMUM SPEED; 1/4" SHANK. USA."
|
|
|
|
Abrasives - Misc/flapwheel
|
4" FLAP SANDER
|
| 120 Grit Sanding Wheel
...plus other(s)
|
RESIN BOND, CLOTH BACKED ALUMINUM OXIDE REMOVES STOCK FAST, YET DOESN'T LEAVE DEEP SCRATCH MARKS. 4" FLAP SANDER ALSO WORKS WELL ON FLAT AREAS AND IS FINE FOR WET SANDING, TOO. RESIN BOND, CLOTH BACKED ALUMINUM OXIDE REMOVES STOCK FAST, YET DOESN'T LEAVE DEEP SCRATCH MARKS. 4" FLAP SANDER ALSO WORKS WELL ON FLAT AREAS AND IS FINE FOR WET SANDING, TOO. TRY IT ON CARVINGS OR MOLDINGS:
FOUR GRITS TO SELECT FROM; 4" DIA. DISCS ARE ABOUT 1" THICK; SLASHED ABRASIVE MOLDS TO DIFFERENT SHAPES. DUE TO HEAVY BACKING, IT'S A GOOD IDEA TO BREAK IN SANDER EDGES ON SOMETHING FIRM BEFORE STARTING A CONTOURED PIECE. THIS ENSURES THAT EDGES FLUFF UP AND THE ABRASIVE STRIPS BECOME PROPERLY ORIENTED. 3,200 RPM MAXIMUM SPEED; 1/4" SHANK. USA.
|
|
|
|
Abrasives - Misc/other
|
A&H ABRASIVES™ MINI BUFFING WHEELS
|
| 1" Mini Sewn Buffing Wheel
...plus other(s)
|
A&H ABRASIVES™ MINI BUFFING WHEELS ARE THE IDEAL SOLUTION FOR PUTTING A HIGH QUALITY FINISH ONTO FINE DETAIL OR INTRICATE CARVINGS:
SELECT FROM 1" OR 2" DIAMETER. REQUIRES 1/8" SHANK MINI BUFFING WHEEL MANDREL (SOLD SEPARATELY)."
|
|
|
|
Hand Tools - Carving Tools
|
JERRY-RIG™ WORK HOLDING SYSTEM
|
| Jerry-rig Work Positioner
...plus other(s)
|
EXTREMELY RUGGED AND IMPRESSIVELY VERSATILE, THE JERRY-RIG™ WORK HOLDING SYSTEM SECURELY HOLDS WOODEN SCULPTURES, TURNINGS, MODELS AND OTHER OBJECTS FOR CARVING, TEXTURING, GLUING, PAINTING AND FINISHING. THE SYSTEM USES TWO MAIN WORK HOLDING FIXTURES - THE BLUE CAST IRON WORK POSITIONER AND THE STAINLESS STEEL BALL POSITIONER. THE WORK POSITIONER COMES WITH A PADDED LOCKING HANDLE ALLOWING ACCESSORIES TO ROTATE 360° SIDE-TO-SIDE WITH 12 INDEXED FRONT-TO-BACK STOP LOCATIONS. THE BALL POSITIONER HAS AN ERGONOMIC BALL AND SOCKET HOLDER FOR UNIVERSAL ROTATION. BOTH POSITIONERS CAN BE BOLTED DIRECTLY TO A TABLE TOP OR USED WITH THE OPTIONAL TABLE CLAMPING FIXTURE FOR WORK TABLES UP TO 3" THICK. SEVERAL JERRY-RIG™ MODELS ARE AVAILABLE ALONG WITH A RANGE OF ACCESSORIES FOR DIFFERENT WORK HOLDING REQUIREMENTS:
JERRY-RIG™ JR-100 WORK POSITIONER INCLUDES THE WORK POSITIONER, TABLE CLAMP FIXTURE, STANDARD POSITIONER PLATE AND HARDWARE KIT. JERRY-RIG™ JR-100LC WORK POSITIONER IS THE SAME AS THE JR-100 BUT DOES NOT INCLUDE THE TABLE CLAMP FIXTURE AND HARDWARE KIT - FOR TABLE TOP MOUNTING ONLY. JERRY-RIG™ JR-B4 BALL POSITIONER INCLUDES BALL POSITIONER, TABLE CLAMP FIXTURE, STANDARD POSITIONER PLATE AND HARDWARE KIT. JERRY-RIG™ JR-B4LC BALL POSITIONER IS THE SAME AS THE JR-B4 BUT DOES NOT INCLUDE THE TABLE CLAMP FIXTURE AND HARDWARE KIT - FOR TABLE TOP MOUNTING ONLY.
ACCESSORIES:
JR-P1 STANDARD POSITIONER PLATE W/MOUNTING ROD (3-1/2" X 4-1/2" X 5/8") IS USED FOR LARGE CARVINGS. JR-PM MEDIUM POSITIONER PLATE W/MOUNTING ROD (3-5/8" X 1-1/4" X 5/8") IS COMMONLY USED FOR HOLDING LARGE FISH AND DUCKS. JR-PS-2 SMALL POSITIONER PLATE W/MOUNTING ROD (2-1/8" X 3/4" X 1/4") IS COMMONLY USED FOR HOLDING SMALL IRREGULARLY SHAPED OBJECTS. JR-HW HARDWARE KIT IS A HANGER BOLT AND KNOB KIT THAT ALLOWS YOU TO QUICKLY SLIDE A WORK PIECE ON OR OFF THE JR-P1 POSITIONER PLATE - INCLUDES TWO STEEL HANGER BOLTS 1/2"-13 AND 3/8"-16, TWO STEEL KNOBS 1/2"-13 AND 3/8"-16, TWO 3/8" STEEL WASHERS, TWO NYLON SPACERS 3/8" X 1/2", FOUR #14 WOOD SCREWS AND AN ALLEN WRENCH. JR-DH1 J-RIG MOUNTING KIT IS A THREADED SHAFT AND HANDLE THAT IS PLACED UP THROUGH THE WORK BENCH AND INTO THE BASE OF POSITIONERS ALLOWING QUICK ROTATION OF WORK. JR-G1 GRIP-ALL HOLDER ATTACHES CARVINGS TO POSITIONERS WITH 3-1/2" LONG X 5/8" DIAMETER HARDENED STEEL HEXAGONAL SHAFT WITH #7 X 3-1/2" WOOD SCREW USED FOR SMALL CARVINGS AND STICK MAKERS. JR-G2 GRIP-STICK HOLDER ATTACHES CARVINGS TO POSITIONERS WITH 3-1/2" LONG X 9/16" DIAMETER HARDENED STEEL HEXAGONAL SHAFT WITH #10 WOOD SCREW USED FOR PAINTING AND DETAILING WORK. JR-V2 TWO-JAW VISE ATTACHMENT FITS INTO THE POSITIONER - FOR LIGHT HOLDING APPLICATIONS. JR-PP1 PEG PLATES ARE ATTACHED TO THE JR-V2 VISE FOR HOLDING IRREGULAR OBJECTS AND INDUSTRIAL COMPONENTS. JRCP-1 CRAVING POST FOR 1"-8TPI WOODTURNING CHUCKS AND FACEPLATES. JRCP-1.25 CARVING POST FOR 1.25"-8TPI WOODTURNING CHUCKS AND FACEPLATES. JRCP-1.5 CARVING POST FOR 1.5"-8TPI WOODTURNING CHUCKS AND FACEPLATES. JR-PW 6" TAPERED CARVING SCREW MOUNTS LARGE CARVINGS TO JR-P1 POSITIONER PLATE, WORK BENCH AND CARVING ARMS WITH TAPERED SCREW AND NUT. JR-CSM 6-3/4" TAPERED CARVING SCREW MOUNTS SMALL TO MEDIUM CARVINGS TO WORK BENCH AND CARVING ARMS WITH TAPERED SCREW AND T-HANDLE TIGHTENER. JR-CSL 9" TAPERED CARVING SCREW MOUNTS LARGE CARVINGS TO WORK BENCH AND CARVING ARMS WITH TAPERED SCREW AND T-HANDLE TIGHTENER. USA.
|
|
|
|
Hand Tools - Carving Tools
|
START OUT RIGHT WITH THIS SIX PIECE WOODCARVING SET
|
| 6 Pc Woodcarving Set
|
IDEAL FOR BEGINNERS, THE 7" LONG TOOLS IN THIS CROWN SIX PIECE WOODCARVING SET FEATURE HIGH QUALITY, HARDENED AND TEMPERED CARBON STEEL BLADES FITTED TO STAINED BEECH HANDLES:
SET INCLUDES 5/16" SQUARE CHISEL, 5/16" BENT SQUARE CHISEL, 5/16" SKEW CHISEL, 3/16" STRAIGHT GOUGE, 5/16" BENT GOUGE AND A 3/16" BENT V-TOOL. ENGLAND.
|
|
|
|
Hand Tools - Carving Tools
|
FLEXCUT® CRAFT CARVER SETS HAVE THE PROFILES YOU NEED TO CREATE BEAUTIFUL RESULTS
|
| 5 Piece Craft Carver Kit
...plus other(s)
|
FLEXCUT® WOODCARVING TOOLS ARE THE CHOICE OF SERIOUS AMATEUR AND PROFESSIONAL WOODTURNERS, WOOD CARVERS, WOOD SCULPTORS, WOODEN BLOCK PRINTMAKERS AND COMMERCIAL SIGN SHOPS:
5 PIECE CRAFT CARVER SET COMES WITH AN INTERCHANGABLE ABS HANDLE AND 4 INTERCHANGEABLE BLADES: #3 SWEEP SK305(3/8), #6 SWEEP SK306 (5/16"), #9 SWEEP SK801 (1.5MM MICRO) AND V PARTING TOOL (1/4").. 11 PIECE CRAFT CARVER SET IS SIMILAR BUT HAS 10 INTERCHANGEABLE BLADES: 1 CHISEL SK329(1/4"), (2)#3 SWEEPS SK305(3/8")& SK400(5/8), #5 SWEEP SK401(9/16"), #6 SWEEP SK306(5/16"), #9 SWEEP SK801(1.5MM), #11 SWEEP SK309(3MM), #11 SWEEP SK408(1-4), PARTING TOOL V SK803 (1MM), & SK307 (1/4"). THE SLIPSTROP AND FLEXCUT GOLD COMPOUND ARE MADE FOR KEEPING A RAZOR SHARP EDGE ON YOUR FLEXCUT CARVING TOOLS. SETS COME WITH BEGINNING CARVING BLANK, SHARPENING MANUALS AND A STORAGE TOOL ROLL..
|
|
|
|
Hand Tools - Carving Tools
|
FLEXCUT® WOODCARVING KNIVES GIVE GREAT CONTROL AND COMFORT
|
| Detail Knife
...plus other(s)
|
|
FLEXCUT® WOODCARVING KNIVES ARE RAZOR SHARP FOR GREAT CONTROL AND MADE WITH THE SAME EDGE HOLDING STEEL AS OUR GOUGES AND CHISELS. ALL HAVE COMFORTABLE CURVED WOODEN HANDLES TO ALLOW FOR LONG PERIODS OF CARVING WITHOUT HAND FATIGUE. THE 3-KNIFE STARTER SET HAS THREE OF THE MOST POPULAR KNIVES IN ONE: KN12 CUTTING KNIFE, KN13 DETAIL KNIFE AND KN14 ROUGHING KNIFE.
|
|
|
|
Hand Tools - Carving Tools
|
FLEXCUT® FLEXIBLE DRAW KNIFE CONFORMS CLOSELY TO THE FINISHED SHAPE
|
| 5" Flexible Draw Knife W/sheath
|
|
FLEXCUT® 5" FLEXIBLE DRAW KNIFE HAS 5" OF WORKABLE EDGE. DESIGNED TO FLEX AROUND CONTOURS WHERE LARGE AMOUNTS OF STOCK NEED TO BE REMOVED QUICKLY AND THEY CONFORM CLOSELY TO THE FINISHED SURFACE, TAKING LESS TIME TO SAND OR SCRAPE. A PROTECTIVE SHEATH IS INCLUDED.
|
|
|
|
Hand Tools - Carving Tools
|
FLEXCUT® SCORPS ALLOW YOU TO CARVE WHERE A GOUGE WONT FIT
|
| Kn21 Scorp Rh
...plus other(s)
|
FLEXCUT® WOODCARVING TOOLS ARE THE CHOICE OF SERIOUS AMATEUR AND PROFESSIONAL WOODTURNERS, WOOD CARVERS, WOOD SCULPTORS, WOODEN BLOCK PRINTMAKERS AND COMMERCIAL SIGN SHOPS:
SCORPS ARE RIGHT-ANGLED GOUGES ARE DESIGNED FOR CARVING AREAS WHERE THE FULL LENGTH OF A GOUGE WILL NOT FIT; AVAILABLE IN RIGHT AND LEFT HANDED MODELS.
TO MAINTAIN TOOL SHARPNESS, FLEXCUT® OFFERS SLIPSTROP™ (117-665), SPECIALLY MOLDED TO ALLOW FOR POLISHING AND DEBURRING V-TOOLS, GOUGES AND OUTSIDE EDGE BEVELS. 117-677 - FLEXCUT GOLD™ POLISHING COMPOUND IS INCLUDED WITH SLIPSTROP™ TO SPEED SHARPENING; ALSO AVAILABLE SEPARATELY.
|
|
|
|
Hand Tools - Carving Tools
|
FLEXCUT™ MALLET TOOLS - THE EXTRA EDGE FOR THE SERIOUS WOODCARVER
|
| 60^ X 3/8" V-parting Tool
...plus other(s)
|
|
|
|
Hand Tools - Carving Tools
|
STUBAI QUALITY WOODCARVING TOOLS STAY SHARPER AND LAST LONGER
|
| 6-pc Basic Palm Gouge Set
...plus other(s)
|
DESIGNED FOR INTRICATE HAND CARVING, 5" LONG STUBAI 57 SERIES PALM GOUGES FEATURE HARDWOOD HANDLES, LIFETIME GUARANTEES AND ARE HAND FORGED SO EDGES STAY SHARPER AND LAST LONGER:
6 PIECE BASIC SET INCLUDES A SKEW CHISEL (#2-5MM), FOUR GOUGES (#3-7MM,#5-3MM,#5-5MM AND A #11-3MM) AND A V-TOOL (#41-5MM). 12 PIECE INTERMEDIATE SET CONTAINS TWO CHISELS (#1-7MM AND #2-5MM), EIGHT GOUGES (#3-5MM, #3-7MM, #5-3MM, #5-5MM, #5-7MM, #7-7MM, #9-4MM AND A #11-3MM) AND TWO V-TOOLS (#41-5MM AND #47-4MM). 18 PIECE ADVANCED SET INCLUDES THREE CHISELS (#1-7MM, #2-3MM AND #2-5MM), 12 GOUGES (#3-3MM, #3-5MM, #3-7MM, #3-20MM #5-3MM, #5-5MM, #5-7MM, #5-10MM, #32-5MM, #7-7MM, #9-4MM AND A #11-3MM) AND THREE V-TOOLS (#41-5MM, #41-8MM AND #47-4MM). AUSTRIA
|
|
|
|
Hand Tools - Carving Tools
|
CARVIN-JACK ™ A COMPLETE CARVING KIT IN YOUR POCKET
|
| Carvin Jack
...plus other(s)
|
THIS IS THE FIRST FOLDING MUTI-TOOL DESIGNED BY FLEXCUT® CARVING TOOLS SPECIFICALLY FOR THE NEEDS OF WOODCARVERS. CARVIN-JACK™ KNIFE INCLUDES A DETAIL KNIFE, HOOK KNIFE, GOUGE SCORP, V-SCORP, CHISEL AND STRAIGHT GOUGE.
KNIFE MEASURES 4-1/4" LONG, WEIGHS 3.5 OZ. INCLUDES A LEATHER SHEATH AND A SLIPSTROP FOR SHARPENING.
BUY THE CARVIN JACK AND GET A 8 PIECE ITALIAN COARSE RIFFLER SET FREE- A $21.99 VALUE FOR A LIMITED TIME ONLY
|
|
|
|
Hand Tools - Carving Tools
|
FLEXCUT™ 21 PIECE DELUXE STARTER SET HAS EVERYTHING TO GET STARTED CARVING
|
| 21 Pc Deluxe Starter Set
|
OUR DELUXE STARTER SET HAS EVERYTHING A NEW WOOD CARVER NEEDS. IT INCLUDES 16 INTERCHANGEABLE BLADES, CUTTING KNIFE, QUICK CONNECT HANDLE AND A MALLET POWER HANDLE. THERE'S ALSO A SLIPSTROP, GOLD COMPOUND AND AN OWNER'S MANUAL SHOWING HOW TO CARE FOR YOUR TOOLS. PLUS YOU'LL FIND A FREE STEP-BY-STEP DVD FOR A GREAT FIRST PROJECT. THIS IS OUR MOST COMPLETE CARVING SET ALL IN ONE BOX. THE FOLLOWING 16 GOUGE PROFILES FEATURED IN THIS KIT ARE NOT INCLUDED IN ANY OTHER FLEXCUT SK CARVING SET.
. #1 SK406 (5/8") CHISEL #2 SK407 (9/16") SKEW #3 SK323 (1/4") GOUGE #3 SK700 (7/8'') GOUGE #5 SK601 (1/8") GOUGE #6 SK446 (1/2") GOUGE #8 SK428 (1/4") GOUGE #8 SK402 (3/8'') GOUGE #8 SK702 (11/16'') GOUGE #9 SK703 (9/16") GOUGE #11 SK602 (1/16") GOUGE #11X SK725 (3/16") THUMBNAIL GOUGE #11X SK927 (1/2'') THUMBNAIL GOUGE #45° SK317 (5/32") V-TOOL #70° SK403 (3/8") V-TOOL #SK754 (7/8") BACK BEND GOUGE #USA
|
|
|
|
Hand Tools - Carving Tools
|
EIGHT PIECE CARVING SET CHISELS, GOUGES AND SPOONS DISPLAY EUROPEAN QUALITY
|
| 72 Straight Chisel 14mm
...plus other(s)
|
|
|
|
Hand Tools - Carving Tools
|
SUPERBLY BALANCED CARVING KNIVES
|
| Detail Carving Knife
...plus other(s)
|
SUPERBLY BALANCED CARVING KNIVES HAVE POLISHED TUNGSTEN AND CARBON BLADES, TAPERED TO A FINE POINT FOR INTRICATE DETAIL CARVING:
878-421 - DETAIL KNIFE HAS 1-3/16"L BLADE; 6-1/4" OVERALL. 878-428 - ROUGH OUT KNIFE HAS 2"L BLADE; 7" OVERALL. 878-435 - JUMBO KNIFE HAS 2-1/4"L BLADE; 7-1/4" OVERALL. PAKKA HARDWOOD VENEER HANDLES ARE DYED, PRESSED WITH EPOXY AND SHAPED (HANDLE COLORS WILL VARY). EACH KNIFE COMES WITH A LEATHER SHEATH. USA.
|
|
|
|
Hand Tools - Carving Tools
|
SIX PIECE SUBMINIATURE PALM GOUGE CARVING SET FOR EXTREMELY PRECISE WORK
|
| Subminiature Palm Gouge Set
...plus other(s)
|
THESE SIX-TOOL SETS ARE PARTICULARLY GOOD FOR INTRICATE WORK BECAUSE OF THE CHISEL SIZES. THE OVERALL DESIGN OF THE TOOL KEEPS YOUR FINGERS CLOSE TO THE CUTTING EDGE AND THE COMFORTABLE HALF-ROUND PALM STYLE HANDLES FEATURE A FLAT SPOT THAT KEEPS THEM FROM ROLLING OFF YOUR BENCH. MADE OF HIGH QUALITY TOOL STEEL, THIS SIX PIECE SUBMINIATURE PALM GOUGE SET WILL EXCEED YOUR CARVING REQUIREMENTS:
CUTTING EDGES ARE POLISHED, SHARPENED AND READY TO USE. HANDLES ARE LACQUERED HARDWOOD. OVERALL LENGTH 4", BLADE LENGTH 1-3/4". INCLUDES L-R, ONE EACH: 7/64" GOUGE, 5/64" BENT V, 5/64" U, 1/8" SKEW, 1/8" BENT CHISEL AND 1/8" CHISEL. IMPORTED.
|
|
|
|
Hand Tools - Carving Tools
|
TWO CHERRIES - THE ULTIMATE CARVING TOOLS
|
| 12 Pc Chisel Set
...plus other(s)
|
IF YOU HAVE BEEN CARVING VERY LONG, YOU KNOW ABOUT WORLD FAMOUS TWO CHERRIES CARVING TOOLS. THEY ARE HAND FORGED USING HIGH CARBON TOOL STEEL, HEAT TREATED BY HAND AND FINELY GROUND AND MIRROR POLISHED BY HAND:
HARDENED TO RC 61 AND HEAT TREATED USING THE IMMERSION BATH METHOD (WHICH GIVES A MUCH MORE CONSISTENT HARDNESS), THESE AMAZING TOOLS WILL TAKE A LITTLE EXTRA TIME TO HONE, HOWEVER, THEY WILL STAY SHARPER LONGER THAN ALMOST ANY OTHER TOOL AVAILABLE. STEEL HOOPS FORTIFY THE HORNBEAM HANDLES AND HELP PREVENT MUSHROOMING AND SPLITTING. FINAL HONING REQUIRED PRIOR TO USE. ORDER INDIVIDUALLY OR IN SETS. GERMANY.
957-137 - 6 PIECE CARVING SET: 957-158 - #6 STRAIGHT GOUGE - 16MM. 957-165 - #11 STRAIGHT GOUGE - 14MM. 957-151 - SKEW BEVEL CHISEL - 14MM. 957-172 - STRAIGHT V-TOOL 75° - 14MM. 957-179 - #16 LONG CURVED GOUGE - 10MM. 957-144 - #8 STRAIGHT CHISEL - 6MM.
957-130 - 12 PIECE CARVING SET: 957-214 - #5 STRAIGHT GOUGE - 16MM. 957-207 - #8 STRAIGHT GOUGE - 14MM. 957-200 - #5 STRAIGHT GOUGE - 14MM. 957-186 - #1 STRAIGHT CHISEL - 14MM. 957-221 - #6 STRAIGHT GOUGE - 10MM. 957-256 - STRAIGHT V-TOOL 75° - 6MM. 957-193 - #7 STRAIGHT GOUGE - 6MM. 957-235 - SKEW BEVEL CHISEL - 6MM. 957-263 - #14 LONG CURVED GOUGE - 6MM. 957-249 - SHORT CURVED CHISEL - 3MM. 957-228 - #6 STRAIGHT GOUGE - 3MM. 957-242 - #11 STRAIGHT GOUGE - 2MM. 957-270 - NO LONGER AVAILABLE.
SPECIALITY TOOLS: 102-233 - #1 SWISS PATTERN FISHTAIL GOUGE - 50MM. 102-236 - #3 SWISS PATTERN FISHTAIL GOUGE - 50MM. 102-239 - #6 SWISS PATTERN FISHTAIL GOUGE - 50MM. 102-242 - #7 SWISS PATTERN FISHTAIL GOUGE - 50MM.
NOTE: ENGLISH CONVERSIONS ARE APPROXIMATE: 2MM = 5/64". 3MM = 7/64". 6MM = 15/64". 10MM = 25/64". 14MM = 35/64". 16MM = 15/32". 50MM = 1-31/32".
|
|
|
|
Wood Specialties - Ornamental Carvings
|
LARGE HAND CARVED WOOD ORNAMENTS
|
| Sm Shell Ctr 5/8 X 12-1/4 X 3-1/2
...plus other(s)
|
|
|
|
Wood Specialties - Ornamental Carvings
|
LARGE HAND CARVED WOOD ORNAMENTS
|
| Medium Scroll
...plus other(s)
|
FROM BENDIX ARCHITECTURAL PRODUCTS, INC., THESE FINELY DETAILED, HAND CARVED WOOD ORNAMENTS ARE IDEAL FOR FURNITURE, CABINETRY OR ARCHITECTURAL ACCENTS - ALL ARE UNFINISHED:
SELECT FROM SCROLLS, PLUMES, CORNERS AND ROSETTES.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
