|
|
|
Bits Drill And Boring - Specialty
|
MACHINE BORING BITS DESIGNED FOR EURO HINGE INSTALLATION
|
| 35mm X 57.5mm X 10mm Carbide Boring Bit
...plus other(s)
|
DESIGNED SPECIFICALLY FOR INSTALLING EURO-STYLE HINGES, THE 35MM AND 40MM DIA. EURO-HINGE BITS HAVE CARBIDE TIPS FOR CLEAN, SMOOTH, FLAT-BOTTOM HOLES:
CARBIDE SPURS AND RADIAL CUTTERS ENSURE LONG LIFE - 2-5/16" OVERALL LENGTH. 3/8" DIA. SHANKS WITH FLATTENED SIDE FOR BETTER GRIP. BITS WORK EQUALLY WELL IN DRILL PRESSES AND BORING MACHINES. NOTE: USE REDUCED SPEEDS FOR LARGE DIAMETER BITS. IMPORTED.
|
|
|
|
Edgebanding/veneer And Composite
|
SANDED EDGE BANDING HAS HEAT SET GLUE BACKING
|
| 13/16" Mahogany-fleece-preglued
...plus other(s)
|
SANDED EDGE BANDING WITH HEAT SET GLUE BACKING IS PERFECT FOR PUTTING THE FINISHING TOUCHES ON PROJECTS:
SELECT FROM 2 PLY MAHOGANY, ASH, WALNUT, WHITE BIRCH, RED BIRCH, RED OAK AND CHERRY OR WHITE, ALMOND, BLACK AND GREY POLYESTERS TO MATCH LAMINATES. 13/16", 7/8", 1", 1-1/2" AND 2" WIDTHS - 6', 8', 25', 200' AND 250' ROLLS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
HAND HELD EDGEBANDING IRON - 800-933. BANDIT-EDGE® TRIMMER - 930-344. CERAMIC EDGE TRIMMER - 801-511. WOODTEK® BENCHTOP EDGEBANDER - 834-842. VIRUTEX® AG98F EDGEBANDER - 948-817. VIRUTEX® DOUBLE EDGE TRIMMER - 809-702.
|
|
|
|
Hand Tools - Cutting
|
VIRUTEX® DOUBLE EDGE TRIMMER FOR LAMINATES
|
| Repl Blade Au
...plus other(s)
|
THE VIRUTEX® DOUBLE EDGE TRIMMER CUTS BOTH SIDES, SIMULTANEOUSLY, TO CUT TRIMMING TIME IN HALF:
HANDLES EDGES UP 55/64" IN WIDTH. HIGH QUALITY, LONG LIFE BLADES. SPRING LOADED DESIGN REQUIRES NO ADJUSTMENT. FOR WIDER EDGES, USE AS TWO INDEPENDENT, ONE SIDED TRIMMERS.
|
|
|
|
Hand Tools - Cutting
|
VIRUTEX® PORTABLE EDGEBANDING TRIMMER FOR PVC, MELAMINE, POLYESTER, VENEER AND MORE
|
| Repl Blades For Rc-21e
...plus other(s)
|
|
|
|
Hand Tools - Cutting
|
THE "GENUINE" VIRUTEX® LAMINATE SLITTER
|
| Laminate Slitter
|
A HAND HELD PORTABLE STRIP CUTTER FOR PLASTIC LAMINATES AND VENEERS, THE VIRUTEX® LAMINATE SLITTER IS QUICK AND EASY TO USE:
CLEAN AND SPLINTER FREE CUTS WITH NO WASTE. 1/2" TO 4.33" CUTTING WIDTH; 0 TO 3/32" CUTTING DEPTH. METAL BRACKET PROVIDES STRONGER HOLD AND STABILITY FOR GUIDE FENCE, WHICH IS BOLTED AT BOTH ENDS FOR EXTRA STRENGTH. EQUIPPED WITH SPECIAL LOCK KNOB ASSEMBLY FOR TIGHTER LOCKING OF FENCE HOLDING BRACKET. WEIGHS 2.7 LBS.
|
|
|
|
Hand Tools - Not Listed Elsewhere
|
HAND HELD, ELECTRIC EDGEBANDING IRON MAKES SMALL JOBS A BREEZE
|
| Edgebanding Iron
|
PERFECT FOR SMALL RUNS, TOUCH-UPS OR REPAIRS IN THE FIELD OR SHOP, THE VIRUTEX® MODEL HI165 EDGEBANDING IRON PROVIDES VARIABLE TEMPERATURES USING A CONCENTRATED HEATING ELEMENT TO DISTRIBUTE HEAT EVENLY FOR CONSISTENT ADHESION:
11" OVERALL WITH 4" X 1-5/8" FACE; 190°-420° F.; WEIGHS 1.1 LBS. 115VAC; UL LISTED; INCLUDES ALUMINUM STAND. USA.
|
|
|
|
Hand Tools - Not Listed Elsewhere
|
J-ROLLER AND PRESSURE ROLLER TAME UNRULY VENEER
|
| J-roller
...plus other(s)
|
THESE DURABLE ROLLERS MAKE SHORT WORK OF PRESSING VENEER INTO PLACE - ALSO WORK WELL FOR LAMINATES:
893-723 - MODEL JR-3 J-ROLLER FEATURES 1-1/2" DIA. X 3" WIDE NON-MARRING ROLLER MOUNTED ONTO 10" LONG, 1/2" DIA. SOLID ALUMINUM HANDLE - 12-1/2" OVERALL. WEIGHS 1/2 LB. 893-730 - MODEL PR-3 PRESSURE ROLLER USES SIMILAR NON-MARRING ROLLER MOUNTED ONTO 1/2" DIA. ZINC-PLATED, SOLID STEEL HANDLE, BENT FOR GREATER LEVERAGE AND PRESSURE. 14-3/4" OVERALL, WEIGHS 1-1/2 LBS. ROLLERS HAVE NO AXLE PROJECTIONS FOR SCRATCHLESS FLUSH AND INSIDE WORK - EACH TOOL HAS TWO VINYL GRIPS FOR A SECURE HOLD. 893-725 - BUY BOTH AT THE SAME TIME AND SAVE! USA.
|
|
|
|
Machinery Accessories - Drill Presses
|
COMPLETE SET
|
| Complete Set
...plus other(s)
|
THE SIMPLE TO USE, EURO-EZE™ ATTACHMENT ADDS A GREAT DEAL OF VERSATILITY BY LETTING YOUR DRILL PRESS BORE ALL THREE HOLES NEEDED TO MOUNT EUROPEAN STYLE HINGES (45MM C/C BLUM® OR GRASS PATTERN) IN ONE STROKE:
DRILLING HEAD FITS INTO 1/2" AND LARGER CHUCKS WHILE STABILIZING ARM QUICKLY CLAMPS TO ROLL SMOOTHLY ALONG SUPPORT POST (FITS FROM 2.34" TO 3.625" POSTS). HEAD HAS BUILT-IN, ADJUSTABLE CHIP GUARD AND STOP OR YOU CAN USE THE DRILL PRESS STOP. USE WITH A SUB TABLE AND BACKING FENCE - DESIGNED TO FIT 10" TO 21" DRILL PRESSES. COMPLETE SET INCLUDES DRILLING HEAD, ROLLING SUPPORT BRACKET, GUIDE POSTS, 10MM BUSHINGS FOR 7/64" DRILL BITS, WRENCH AND INSTRUCTIONS (BITS SOLD SEPARATELY). U.S. PATENT NO. 6,244,793. OPTIONAL INSERTION RAM IS USED TO INSERT DOWELED HINGES - BOLTS ONTO EURO-EZE™ HEAD BUT FLIPS OUT OF THE WAY WHEN NOT IN USE. OPTIONAL TAB SETTING JIG MAKES SET UP QUICK AND EASY BY ADJUSTING FOR TAB MEASUREMENTS FROM 1MM TO 12MM. USA.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX® AUTOMATIC PRODUCTION EDGEBANDER EB-25 READY FOR OPERATION IN JUST 60 SECONDS
|
| Eb-25(35) Auto Edgebander
...plus other(s)
|
FOR PANEL EDGEBANDING USING PREGLUED PVC, POLYESTER, MELAMINE AND WOOD TAPE, THE FLOOR-MOUNTED VIRUTEX® EB-25 AUTOMATIC PRODUCTION EDGEBANDER, WITH POWER FEEDER, IS A PRODUCTION FACILITY POWERHOUSE:
HOT AIR SYSTEM USES ELECTRONIC TEMPERATURE CONTROL TO HEAT TO 900°F IN ONE MINUTE. MOTORIZED TRIMMING HELPS ENSURE PRECISE EDGES. BELT DRIVE PROVIDES SMOOTHER OPERATION. ONE YEAR MANUFACTURER'S WARRANTY. SPAIN.
SPECIFICATIONS:
POWER - 220VAC, 15A, 1PH. FEED - 15 FPM POWER FEEDER W/AUTO EDGE FEED. TRIM - AUTOMATIC TOP, BOTTOM, FRONT AND END. CAPACITY - 7/16" - 2-1/2". DIMENSIONS - 67.7" X 37.4" X 53.1". WEIGHT - 260 LBS. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX® AUTOMATIC PRODUCTION EDGEBANDER
|
| Automatic Benchtop Edgebander
|
FOR EDGEBANDING USING PRE-GLUED PVC, MELAMINE AND VENEER, THE VIRUTEX ® EB10C BENCH MOUNT PRODUCTION EDGEBANDER PROVIDES SIMULTANEOUS, FLUSH, TOP AND BOTTOM TRIMMING PLUS AUTOMATIC ROUGH TRIMMING OF THE ENDS:
220VAC, 15A, 1PH HOT AIR SYSTEM USES ELECTRONIC TEMPERATURE CONTROL TO HEAT TO 900°F IN ONE MINUTE. 0.3" TO 2.55" THICKNESS CAPACITY. NO COMPRESSED AIR OR DUST COLLECTOR REQUIRED. TO EDGEBAND CURVED PIECES, REMOVE THE TRIMMING UNIT AND USE THE FOOT PEDAL TO CUT THE ENDS. 17"H X 37.4"W X 23.6"D. 79 LBS. NET WEIGHT; 84 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. SPAIN. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX BENCHTOP / PORTABLE GLUE POT EDGE BANDER CAN BE EASILY TRANSPORTED TO JOBSITES
|
| Glue Pot Edge Bander, Bench Top/portable
|
|
GLUE POT EDGE BANDER WITH TEMPERATURE CONTROL FOR PVC, POLYESTER, MELAMINE, WOOD VENEER TAPES OF UP TO 1/8" (3 MM) THICK AND PLASTIC LAMINATE STRIPS. EASY AND FAST SET UP OF TAPE HEIGHT AND PANEL THICKNESS. AUTOMATIC TAPE FEED WITH CONTROL. FAST HEAT UP TIME OF 10 MINUTES. RUSTIC IRON DROP PULLS ADD A UNIQUE APPEARANCE TO DOORS AND CABINETS. LIMITED TO QUANTITIES IN HAND
|
|
|
|
Portable Power Tools Electric - Not Listed Elsewhere
|
VIRUTEX® CURVE PLANER WORKS ON CONVEX, CONCAVE OR FLAT SURFACES
|
| Curve Planer
|
THE VIRUTEX® CE96H CURVE PLANER HAS A BASE THAT ADJUSTS FOR CONVEX OR CONCAVE SURFACES:
120V, 6.7A, 16,500 CPM MOTOR. 17-11/16" MINIMUM CONCAVE RADIUS; 15-3/4" CONVEX. 3-5/32" CUTTING WIDTH; 1/8" CUTTING DEPTH. 0°-45° BEVEL ADJUSTMENT. INCLUDES CASE, WRENCH, BLADE SETTING GAUGE, TWO REVERSIBLE CARBIDE BLADES, DUST COLLECTION PORT AND BEVEL FENCE. WEIGHS 8 LBS. ONE YEAR MANUFACTURERS WARRANTY. SPAIN.
|
|
|
|
Portable Power Tools Electric - Not Listed Elsewhere
|
VIRUTEX® EDGE LIPPING PLANER FOR PRECISION TRIMMING
|
| Edge Lipping Planer
|
THE VIRUTEX® EDGE LIPPING PLANER IS DESIGNED FOR PRECISION FLUSH PLANNING UP TO 2-1/4" OF SOLID SURFACE, HARDWOOD, SOFTWOOD, LAMINATES AND PVC:
110V, 1.4HP, 11,100 RPM MOTOR. REMOVAL RATE OF 1/8" PER PASS. CONTINUOUS CUTTING DEPTH ADJUSTMENT WITH NO MINIMUM INCREMENT. INCLUDES CARBIDE REVERSIBLE, SELF INDEXING BLADES THAT REQUIRE NO ADJUSTMENTS. NON-SCRATCH TEFLON® COATED BASE. WEIGHS 17 LBS.
|
|
|
|
Portable Power Tools Electric - Not Listed Elsewhere
|
VIRUTEX® PORTABLE, HOT AIR EDGEBANDER EASILY APPLIES PRE-GLUED PVC, MELAMINE OR WOOD VENEER
|
| Hand Held Edgebander
|
A SPECIAL DESIGN WITH ADJUSTABLE CLAMPS ENSURES THE VIRUTEX® AG98F PORTABLE, HOT AIR EDGEBANDER PRODUCES PRECISION WORK WITH GREAT STABILITY. PERFECT FOR CIRCULAR AND SHAPED PIECES:
110V, 1,500W ELEMENT - ONE MINUTE SET UP TIME. 572°F. OR 977°F. OPERATING TEMPERATURES 2" MAXIMUM EDGEBANDING WIDTH. WEIGHS 6 LBS. SPAIN.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.