|
|
|
Hand Tools - Scraping & Shaping
|
SMALL PALM PLANE GIVES AMAZING CONTROL
|
| Palm Plane
|
WITH A 1" WIDE BLADE AND A 3-1/4" LONG SOLE, THIS DIMINUTIVE PLANE WORKS IN TIGHT SPACES AS WELL AS ON INTRICATE DETAILS:
TIME TESTED DESIGN FITS FIRMLY IN THE PALM WITH A FINGER RESTING AT THE FRONT OF THE PLANE. ONE PIECE CAST IRON CONSTRUCTION FOR NEAR INDESTRUCTIBILITY; BLADE IS SET USING A SIMPLE THUMBSCREW (FINAL HONING REQUIRED). GERMANY.
|
|
|
|
Hand Tools - Scraping & Shaping
|
STANLEY® HAND PLANES
|
| #60-1/2p L/a Block Plane
...plus other(s)
|
SOME OF THE FINEST QUALITY, YET ECONOMICAL, HAND PLANES ARE PRODUCED BY STANLEY® FOR SMOOTH OPERATION AND PRECISION:
103-151 - #78 RABBET PLANE IS 10" LONG WITH 1-1/2" WIDE CUTTER. ONE PIECE CAST IRON BODY AND HANDLE WITH ALL WORKING SURFACES ACCURATELY MACHINED FOR PRECISE RESULTS. TWO CUTTER POSITIONS: REAR FOR REGULAR WORK AND FORWARD FOR BULL NOSE WORK. REAR CUTTER HAS PRECISE DEPTH ADJUSTMENT. FITTED WITH A SPUR FOR WORK ACROSS WOOD GRAIN, REMOVABLE DEPTH GAUGE AND ADJUSTABLE FENCE THAT CAN BE FITTED ON EITHER SIDE.
103-017 - 6" LOW ANGLE BLOCK PLANE HAS 1-3/8" WIDE CUTTER. GRAY CAST IRON BASE WITH PRECISION GROUND SIDES AND BOTTOM. DURABLE EPOXY COATING FOR LONG LASTING PROTECTION. SHAVING CONTROL PROVIDED BY EXACT DEPTH AND LATERAL CUTTER ADJUSTMENT. QUICK RELEASE CAM LOCK FOR EASY BLADE REMOVAL. MACHINED FINGER GRIPS IN SIDES PROVIDE EASY SINGLE-HANDED USE. 13-1/2° LOW ANGLE CUTTER ENSURES THAT VIBRATION IS KEPT TO A MINIMUM FOR A FINE FINISH. IDEAL FOR PLANING END GRAIN AND PLASTIC MATERIALS.
103-020 - #75 ADJUSTABLE BULL NOSE PLANE IS 4" LONG WITH 1-1/8" WIDE CUTTER. GRAY CAST IRON BODY MACHINED ON BASE AND SIDES. IDEAL LIGHTWEIGHT TOOL FOR TRIMMING REBATES. ADJUSTABLE MOUTH FOR COURSE OR FINE WORK. DESIGNED WITH CUTTER AT FRONT FOR CLOSE WORK INTO CORNERS.
|
|
|
|
Hand Tools - Scraping & Shaping
|
NEED SMALL HAND TOOLS TO FIT SMALL PROJECTS?
|
| Miniature Block Plane
...plus other(s)
|
USING PLANTATION GROWN ROSEWOOD ALONG WITH BRASS FITTINGS, THESE EXQUISITELY SIZED SMALL HAND TOOLS CAN BE USED FOR MODEL MAKING, INSTRUMENT MAKING OR FINE WORK ON ANY PROJECT:
DESIGNED TO THE SAME HIGH STANDARDS AS THEIR LARGER COUNTERPARTS, THESE TOOLS PERFORM EXTREMELY WELL. 952-024, 952-017, 952-010 - PLANES ARE ABOUT 3" LONG. 103-535 - TORPEDO LEVEL IS 4-1/4" LONG. 103-547 - TRY SQUARE HAS A 4" BLADE. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
EASILY SCRAPE WOOD AS SMOOTH AS GLASS
|
| Bow Form Scraper Holder
|
USING THE BOW-FORM™ CONCAVE SCRAPER HOLDER, AND ITS ENCLOSED SCRAPER BLADE, YOU CAN SET UP GENTLE BOWS FOR PRECISE, CONSISTENT AND SMOOTH WOOD SCRAPING:
7-1/2"W X 2"H X 1-3/8"D ANODIZED ALUMINUM BODY WITH KNURLED BRASS ADJUSTING SCREW - HANDLES SCRAPERS UP TO 1/16" THICK. NO TECHNIQUES TO LEARN, NO BURNED FINGERS AND NO TIRED HANDS. CAN BE USED WITH ALMOST ANY SCRAPER. USA.
|
|
|
|
Hand Tools - Scraping & Shaping
|
2 IN 1 CORNERING TOOL
|
| 2 In 1 Cornering Tool
|
ONE OF THE HANDIEST AND QUICKEST WAYS TO SOFTEN EDGES, THE 2-IN-1 CORNERING TOOL WILL EASILY FIT INTO YOUR HAND:
THE HEAD OF THE 5" LONG TOOL IS MOLDED AT THE CORRECT ANGLE SO THE TRIM BLADE CAN CUT PERFECT CHAMFERS. THE RADIUS EDGE CUTTER PROVIDES SMOOTH 1/16" OR 1/8" ROUNDED EDGES WITH A SIMPLE PULL OR PUSH. DURABLE PLASTIC HANDLE WITH HANGING HOLE - THUMBSCREW HOLDS THE TRIM BLADE OR RADIUS EDGE CUTTER IN PLACE DURING USE. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
PROFESSIONAL SCRAPING PERFORMANCE WITH A SOFT GRIP HANDLE
|
| 2-1/2" 4 Edge Soft Grip Scraper
...plus other(s)
|
SOFT GRIP SANTOPRENE®, DOUBLED MOLDED OVER A SOLID CORE HANDLE, MEANS THESE SCRAPERS HELP REDUCE FATIGUE AND BLISTERS:
FOUR EDGE, CAMBER GROUND BLADE CUTS THROUGH CAKED ON PAINT LIKE A HOT KNIFE THROUGH BUTTER. CHOOSE FROM THREE SCRAPER BLADE WIDTHS. 110-285 - 2-1/2"W SCRAPER HAS A BLADE FILE STORED IN THE HANDLE FOR RESHARPENING. USA.
|
|
|
|
Hand Tools - Scraping & Shaping
|
SIX DOUBLE EDGED BLADES PROVIDE 12 EFFECTIVE SCRAPING PROFILES
|
| Contour Scraper
|
THE ALLWAY CS6 CONTOUR SCRAPER HAS AN ERGONOMICALLY CORRECT, SOFT GRIP HANDLE FOR LESS FATIGUE AND INTERCHANGEABLE BLADES TO MEET MOST REQUIREMENTS:
EACH HEAT TREATED, CUTLERY STAINLESS STEEL BLADE HAS TWO DIFFERENT EDGES TO MAKE SCRAPING MOLDING, FURNITURE AND MILLWORK EASIER. SCRAPER HOLDS BLADES AT CORRECT ANGLE FOR SCRAPING WITH NO CHATTER. HALF ROUND FILE STORES IN HANDLE FOR QUICK TOUCH UPS WHEN BLADES NEED SHARPENING. HANDLE IS ABOUT 7-3/4" LONG. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ENGLISH PATTERN DRAWKNIVES FOR OLD WORLD FINISHING
|
| Bent Draw Knife 11"x1-5/8"
...plus other(s)
|
CROWN TOOLS' ENGLISH PATTERN DRAWKNIVES ARE MANUFACTURED FROM CAREFULLY HARDENED AND TEMPERED HIGH CARBON STEEL:
BOTH FEATURE 10" LONG BLADES WITH BEECH HANDLES AND BRASS FERRULES. 113-057 - MODEL DKB HAS HANDLES IN LINE WITH THE BACK OF THE BLADE FOR GREATER CONTROL AND A SLIGHT CURVE TO SPEED STOCK REMOVAL. 119-663 - MODEL DK IS A STRAIGHT-BLADED OR LONDON PATTERN CARPENTER'S DRAWKNIFE WITH HANDLES FIXED AT 90° TO THE EDGE. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
QUALITY RALI® SWISS HAND PLANES NEVER NEED SHARPENING
|
| Rali 260m Smoothing Plane
...plus other(s)
|
|
|
|
Hand Tools - Scraping & Shaping
|
RAZOR SHARP HARDENED STAINLESS STEEL TOOLS CUT SMOOTH AND FAST
|
| Large Round Rasp W/handle
...plus other(s)
|
THE EXCLUSIVE MICROPLANE® HAND TOOL MANUFACTURING PROCESS CREATES EXTREMELY SHARP AND DURABLE TEETH FOR FAST, SMOOTH, LOW EFFORT CUTTING IN ALL TYPES OF WOOD - PATENTED CUTTERS PRODUCE SHAVINGS INSTEAD OF SAWDUST, LEAVING A FINISH THAT ONLY REQUIRES MINIMAL SANDING. SQUARE AND ROUND RASPS COME IN THREE SIZES AND INCLUDE HANDLES. SPECIALTY PRODUCTS INCLUDE:
STANDARD SERIES RASP COMES IN LARGE OR SMALL AND ROUND OR SQUARE SHAPE AND INCLUDES HANDLE. SNAP-IN RASP FEATURES AN INTERCHANGEABLE, REVERSIBLE 1" X 8" COARSE FLAT BLADE. REPLACEMENT FLAT, ROUND OR ANGLED BLADES EASILY SNAP INTO THE COMFORTABLE OFFSET HANDLE. 1" AND 2" ROTARY SHAPERS USE REPLACEABLE BLADES IN A 1/4" DIA. SHANK MOUNTED DESIGN FOR DRILL PRESS USE (2,500 RPM MAX. SPEED). ROTARY SHAPER FOLLOWER KIT WILL MOUNT ONTO THE BASE OF EITHER SHAPER FOR USE WITH TEMPLATES TO DUPLICATE CONTOURS. 12" FLEXIBLE, RIGID AND HALF ROUND BLADES PLUS 2-IN-1 BLADES CAN BE MOUNTED INTO STANDARD HACKSAW FRAMES. 10" AND 5-1/2" FLAT BLADES REPLACE STANDARD SURFORM® PLANE BLADES. USA.
|
|
|
|
Hand Tools - Scraping & Shaping
|
CLIFTON PLANES ARE ACCURATE, SMOOTHLY FUNCTIONING TOOLS FOR CABINET MAKERS AND DISCERNING WOODWORKERS
|
| #3 Clifton Bench Plane 1-3/4" Blde
...plus other(s)
|
CLIFTON PLANES FEATURE HAND FORGED 1/8" THICK HIGH CARBON STEEL BLADES WITH TWO-PIECE CAP IRONS, FULLY GROUND SIDES AND SOLES AND POLISHED BUBINGA HARDWOOD KNOBS AND HANDLES. THEY ALSO HAVE STAINLESS STEEL ADJUSTING LEVERS AND COMPONENTS AND ACCURATELY MACHINED GRAY CAST IRON BODIES AND FROGS (FROG MECHANISMS USE FULLY MACHINED "BEDROCK" DESIGN FOR RIGIDITY; DESIGN MEANS MOUTH WIDTH CAN BE ADJUSTED WITHOUT CHANGING THE BLADE SETTING):
116-780, 116-783 - #3 AND #4 BENCH PLANES ARE 9-3/4"L. 143-102 - #4-1/2 SMOOTH PLANE IS 10-1/2"L. 116-786 - #5 BENCH PLANE IS 14"L. 143-105 - #5-1/2 JACK PLANE IS 15"L. 116-789 - #6 BENCH PLANE IS 18"L. 116-792 - #7 BENCH PLANE IS 22-1/4"L. 116-807 - THE 3-IN-1, CLIFTON 3110 PLANE COMBINES THE FEATURES OF SHOULDER, CHISEL AND BULL NOSE PLANES. AS A SHOULDER PLANE, A FRONT EXTENSION PIECE IS ATTACHED. AS A CHISEL PLANE, ALL NOSE PIECES ARE REMOVED. AS A BULL NOSE PLANE, THE THINNER NOSE PIECE IS FITTED WITH ONE OR BOTH 1/32" AND 1/64" PRECISION MACHINED STEEL SHIMS. 6"L. 1-1/8" BLADE. 2 LBS. 116-813 - THE CLIFTON 420 SHOULDER RABBET PLANE FILLS THE NEED FOR A LIGHT, ACCURATE SHOULDER PLANE. 8"L. 3/4" BLADE. 2.5 LBS. 116-819 - MODEL 410 IS A NARROW, LIGHT AND ACCURATE SHOULDER PLANE. 5-1/2"L. 11/16" BLADE. 1-1/4 LBS.
NOTE: COMBINATION AND SHOULDER RABBET PLANES ARE MACHINED USING MANY OF THE SAME QUALITY MATERIALS AS THE BENCH PLANES; ADJUSTMENTS ARE GENERALLY MADE USING A SET SCREW.
116-825 - MODEL 400 IS A DELICATE PLANE FOR PRECISION WORK. BLADE ADJUSTED AND HELD IN PLACE WITH A ROSEWOOD WEDGE. 3-1/8"L. 3/8" BLADE. 810-173, 810-180 - CLIFTON 2 PIECE CAP IRONS IMPROVE THE PERFORMANCE OF STANDARD BENCH PLANES BY FITTING TIGHTER AND REDUCING CLOGGING IN THE MOUTH. 810-173, 810-180 - CLIFTON 2 PIECE CAP IRONS IMPROVE THE PERFORMANCE OF STANDARD BENCH PLANES BY FITTING TIGHTER AND REDUCING CLOGGING IN THE MOUTH. 810-173 FITS #4 AND #5 BENCH PLANES; 810-180 FITS #6 AND #7. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
CORNERING TOOL SET
|
| Cornering Tool Set
|
WOODWORKER'S SUPPLY® TWO-PIECE CORNERING TOOL SET CAN SOFTEN THOSE DOOR EDGES SO THAT NOT ONLY IS THE FIT RIGHT, BUT FINISH OR PAINT WILL NOT CHIP OFF:
ROUND EDGES TO 1/16", 1/8", 3/16" OR 1/4" RADII. USE ONE SIZE SMALLER TOOL TO "BREAK" THE EDGE AND FOLLOW WITH THE FINISHING SIZE. 5-3/4" LONG HARDENED TOOL STEEL - NICKEL PLATED. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
FOOTPRINT TOOLS HAND PLANES MANUFACTURED UNDER STRINGENT QUALITY ASSURANCE STANDARDS
|
| 7"x1-5/8" #220b Block Plane
...plus other(s)
|
MADE USING SHEFFIELD STEEL BLADES, FOOTPRINT TOOLS HAND PLANES OFFER HIGH QUALITY AT A REASONABLE PRICE:
124-703 - 220B BLOCK PLANE IS IDEAL FOR END GRAIN OR SMALL-SCALE PLANNING - 7"L X 1-5/8"W, WEIGHS 1-3/4 LBS. 124-706 - 4B SMOOTH PLANE DESIGNED FOR GENERAL PURPOSE PLANNING; OFTEN USED AFTER JACK PLANE FOR FINAL FINISHING - 9-3/4"L X 2"W, WEIGHS 4-1/4 LBS. 124-709 - 5B JACK PLANE REMOVES HEAVY MATERIAL AND SQUARES ROUGH TIMBER - 14"L X 2"W, WEIGHS 5 LBS. ALL FEATURE HIGH CARBON SHEFFIELD STEEL BLADES - BLOCK PLANE HAS PLASTIC HANDLE; SMOOTH AND JACK PLANE HANDLES ARE BEECH. GRAY CAST IRON BODIES, FROGS AND LEVER CAPS AND MACHINE-GROUND BASES. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
NICHOLSON® AMERICAN PATTERN 10" RASPS
|
| #49 Second Cut Nicholson Rasp
...plus other(s)
|
NICHOLSON® 10" AMERICAN PATTERN RASPS ARE IDEAL FOR AGGRESSIVE STOCK REMOVAL:
124-829, 124-832 - PATTERN MAKER'S CABINET RASPS FEATURE A NARROW PATTERN WITH CUT EDGES AND HALF-ROUND SHAPE. MODEL #49 IS A SECOND CUT FOR AGGRESSIVE STOCK REMOVAL. #50 IS A SMOOTH CUT FOR FAST CUTTING, BUT LEAVES A SMOOTH FINISH. EACH WEIGHS ABOUT 5 OZ. AND ACCEPTS OPTIONAL HANDLES. 124-835 - 4-IN-HAND® RASP (FORMERLY SHOE RASP) HAS SEPARATE FILE AND RASP SECTIONS ON FLAT AND HALF-ROUND SIDES - A GOOD CHOICE FOR WOODWORKERS, HOMEOWNERS OR BOAT BUILDERS. WEIGHS 10 OZ. USE WITHOUT HANDLE. 124-874 - FILE HANDLE USES INTERCHANGEABLE CUSHION INSERTS DESIGNED TO HOLD MOST POPULAR FILES AND RASPS. RUBBER COATED, EGONOMIC HANDLE HAS REAR TAPER, WIDE MIDDLE AND FLARED NECK TO INCREASE PUSH FORCE.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ANANT® RABBET PLANE REPRESENTS A SOLID VALUE
|
| A-10 Bench Plane
|
THE ANANT® MODEL A-10 RABBET PLANE CAN PROVIDE MANY YEARS OF QUALITY SERVICE FOR A PRICE THAT IS A FRACTION OF OTHER HAND PLANES:
CAST IRON BODY ENSURES STRENGTH AND RIGIDITY. MACHINED LEVER CAP FIRMLY HOLDS IRON CAP AND IRON IN PLACE WITH SCREWS TO HELP PREVENT CHATTERING. HIGH CARBON STEEL BLADE IS HARDENED AND TEMPERED FOR ACCURACY AND UNIFORMITY - LATERAL ADJUSTING LEVER SETS EVENNESS OF CUT. HARDWOOD HANDLE AND KNOB WITH KNURLED BRASS ADJUSTING NUT. 12-7/8"L X 2-1/8"W X 5-3/8"H, WEIGHS 4 LBS., 5 OZ.. ONCE PROPERLY TUNED, THIS HAND PLANE CAN EASILY EXCEED YOUR EXPECTATIONS IN ALMOST EVERY WAY. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
BLOCK PLANE 5"-ROSEWOOD
|
| Block Plane 5"-rosewood
...plus other(s)
|
DURABLE ASIAN ROSEWOOD GIVES THESE HANDCRAFTED WOODWORKING PLANES THEIR DISTINCTIVE APPEARANCE:
DESIGNED TO BE USED ON THE "PULL" RATHER THAN THE "PUSH" STROKE (RABBET PLANE CAN BE USED IN EITHER DIRECTION). CARBON STEEL IRONS SECURED WITH WEDGES (USE HAMMER TO ADJUST) - SOLES INCLUDE A BRASS INSERT AT THE MOUTH TO REDUCE WEAR. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
GLEN-DRAKE PLANE HAMMER #2 - 131-759.
|
|
|
|
Hand Tools - Scraping & Shaping
|
EURO SMOOTHING PLANE - 9-3/4"
|
| 9-3/4" Euro Smoothing Plane
...plus other(s)
|
DURABLE ASIAN ROSEWOOD HAS BEEN USED TO GIVE THESE UNIQUE EUROPEAN STYLE WOODWORKING PLANES THEIR DISTINCTIVE APPEARANCE:
EURO SMOOTHING PLANES INCLUDE A CHIPBREAKER AND CARBON STEEL IRON SECURED WITH A WEDGE (USE HAMMER TO ADJUST). JACK/SMOOTH PLANE FEATURES A CARBON STEEL IRON WITH WEDGE. RABBET PLANE HAS AN ADJUSTABLE NOSEPIECE AND CARBON STEEL IRON WITH WEDGE. CONTOUR PLANES HAVE CARBON STEEL BLADES WITH NO WEDGES - USE IS SIMILAR TO A SMALL SPOKESHAVE. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
STANLEY® SWEETHEART™ NO.4 SMOOTHING PLANES ARE IDEAL FOR FINAL SMOOTHING
|
| Sweetheart No.4 Smoothing Bench Plane
|
STANLEY BEGAN THEIR BUSINESS IN 1843 AND HAVE SINCE DEVELOPED QUALITY, INNOVATIVE TOOLS FOR THE PROFESSIONAL WOODWORKER. OVER THE YEARS STANLEY HAS BECOME ONE OF THE MOST SUCCESSFUL MANUFACTURERS OF CAST IRON PLANES AND HAVE SOLD MILLIONS WORLDWIDE. THESE NEW STANLEY® SWEETHEART™ NO.4 PLANES ARE SOLIDLY BUILT AND FEATURE TOUGH AND DURABLE A2 TOOL STEEL FOR SUPERIOR EDGE RETENTION. THE NO.4 PLANE IS 2-1/2" WIDE X 10" LONG WITH A 2" WIDE BLADE AND AT APPROXIMATELY 5 LBS. IS THE IDEAL SIZE FOR THAT FINAL SURFACE SMOOTHING PRIOR TO FINISH SANDING AND FINISHING. EACH PLANE BASE IS MADE FROM PRECISION GROUND, HIGH QUALITY CAST IRON FOR FLATNESS, RIGHT OUT OF THE BOX. SPECIAL CASTING ELIMINATES MOST CHATTER AND VIBRATION.
IDEAL FOR FINAL FINISHING AND SMOOTHING. IRON IS EXTRA THICK 1/8" STEEL. SOLID CHERRY WOOD HANDLES FOR COMFORT. ADJUSTABLE THROAT PLATE FOR DIFFERENT TYPES OF WOOD. ADJUSTABLE MOUTH FOR DIFFERENT TYPES OF WOOD. NORRIS TYPE ADJUSTER WITH LATERAL LOCK FOR ACCURACY AND EASE OF USE.
|
|
|
|
Hand Tools - Scraping & Shaping
|
STANLEY® SWEETHEART™ NO.62 LOW ANGLE JACK PLANE PLANES CAN BE USED FOR MOST PLANING OPERATIONS
|
| Sweetheart No.62 Low Angle Jack Plane
|
IF YOU ONLY WANT TO OWN ONE PLANE THIS IS PROBABLY THE ONE TO HAVE. THE REINTRODUCED STANLEY® SWEETHEART™ NO. 62 PLANES ARE SOLIDLY BUILT AND FEATURE TOUGH AND DURABLE A2 TOOL STEEL FOR SUPERIOR EDGE RETENTION. THE NO. 62 COMES COMPLETE WITH A 2" WIDE BEVEL UP BLADE THAT CAN BE USED FOR JOINTING SHORT BOARDS, AND FOR ROUGHING OR SMOOTHING. THESE PLANES COMBINE THE BAILEY CLASSIC DESIGNS WITH THE LATEST DESIGN FEATURES. EACH PLANE BASE IS MADE FROM PRECISION GROUND, HIGH QUALITY CAST IRON FOR FLATNESS, RIGHT OUT OF THE BOX. SPECIAL CASTING ELIMINATES MOST CHATTER AND VIBRATION.
IRON IS EXTRA THICK 3/16" STEEL. 2-1/2" WIDE BY 14" LONG. SOLID CHERRY WOOD HANDLES FOR COMFORT. ADJUSTABLE THROAT PLATE FOR DIFFERENT TYPES OF WOOD. THE LOW ANGLE MAKES EASIER WORK OF DIFFICULT GRAIN. NORRIS TYPE ADJUSTER WITH LATERAL LOCK FOR ACCURACY AND EASE OF USE.
|
|
|
|
Hand Tools - Scraping & Shaping
|
STANLEY® SWEETHEART™ NO.9-1/2 BLOCK PLANES ARE IDEAL FOR TRIMMING AND PARING
|
| Sweetheart No.9-1/2 Block Plane
|
THESE PLANES COMBINE THE BAILEY CLASSIC DESIGNS WITH THE LATEST DESIGN FEATURES. EACH PLANE BASE IS MADE FROM PRECISION GROUND, HIGH QUALITY CAST IRON FOR FLATNESS, RIGHT OUT OF THE BOX.
IRON IS EXTRA THICK 1/8 STEEL. PRECISION GROUND DUCTILE CAST IRON BASE FOR ACCURACY. FULLY ADJUSTABLE MOUTH. SOLID BRASS HARDWARE. NORRIS TYPE ADJUSTER WITH LATERAL LOCK FOR ACCURACY AND EASE OF USE.
|
|
|
|
Hand Tools - Scraping & Shaping
|
STANLEY® SWEETHEART™ NO.60-1/2 LOW ANGLE BLOCK PLANES HELP PREVENT TEAROUT
|
| Sweetheart No.60-1/2 L/a Block Plane
|
THESE LOW ANGLE BLOCK PLANES ARE IDEAL FOR TRIMMING END GRAIN AND THE LOWER ANGLE PREVENTS MUCH OF THE TEAROUT WHEN WORKING LAMINATES. THESE PLANES COMBINE THE BAILEY CLASSIC DESIGNS WITH THE LATEST DESIGN FEATURES. EACH PLANE BASE IS MADE FROM PRECISION GROUND, HIGH QUALITY CAST IRON FOR FLATNESS, RIGHT OUT OF THE BOX.
IRON IS EXTRA THICK 1/8" STEEL. PRECISION GROUND DUCTILE CAST IRON BASE FOR ACCURACY. FULLY ADJUSTABLE MOUTH. SOLID BRASS HARDWARE. NORRIS TYPE ADJUSTER WITH LATERAL LOCK FOR ACCURACY AND EASE OF USE.
|
|
|
|
Hand Tools - Scraping & Shaping
|
STANLEY® SWEETHEART™ NO.92 SHOULDER/CHISEL PLANE ALLOWS EASY TRIMMING OF WOOD TENNONS
|
| Sweetheart No.92 Shoulder/chisel Plane
|
THESE NEW STANLEY® SWEETHEART™ NO.92 PLANES FEATURE TOUGH AND DURABLE A2 TOOL STEEL FOR SUPERIOR EDGE RETENTION. DUAL PURPOSE, IT EASILY CONVERTS FROM A SHOULDER PLANE TO A CHISEL PLANE FOR CORNER CLEANING AND GLUE REMOVAL. EACH PLANE BASE IS MADE FROM PRECISION GROUND, HIGH QUALITY CAST IRON FOR FLATNESS, RIGHT OUT OF THE BOX.
IRON IS EXTRA THICK 1/8" STEEL. 3/4" WIDE X 6" LONG. FINGER GRIPS FOR BETTER CONTROL.
|
|
|
|
Hand Tools - Scraping & Shaping
|
DRAW KNIFE SHAVES WOOD AS SMOOTH AS GLASS
|
| 9-1/2"x1" Drawknife
|
THE HOLLOW-BACKED, GENTLY CURVED CUTTING EDGE ON THIS FISCH™ PRECISION TOOLS' DRAW KNIFE YIELDS MORE CONTROL AND PRODUCES FINER SLICES THAN A STRAIGHT EDGE:
MODEL 3360-03N DRAW KNIFE HAS A 9-1/2" X 1" CUTTING EDGE. BLADES ARE HIGH CARBON STEEL, WITH HARDWOOD HANDLES, OFFSET BELOW THE CUTTING EDGE. AUSTRIA.
|
|
|
|
Hand Tools - Scraping & Shaping
|
GLUE SCRAPER
|
| Glue Scraper
...plus other(s)
|
WHEN WOODWORKER'S SUPPLY COULDN'T GET THE GLUE SCRAPER IT WANTED, THE COMPANY HAD IT BUILT:
DESIGNED WITH PLENTY OF LEVERAGE AND A KNOB FOR A TWO HANDED HOLD SO YOU CAN BEAR DOWN ON BOARDS. WITH ITS LARGE KNOB AND CONTOURED HANDLE, THE GLUE SCRAPER IS QUITE COMFORTABLE TO HOLD. 13" LONG OVERALL; 2-1/4" X 2-1/4" BLADE. BLADES ARE HEAT TREATED FOR HARDNESS TO HOLD AN EDGE; COME SHARPENED ON ALL FOUR SIDES.
|
|
|
|
Hand Tools - Scraping & Shaping
|
CERAMIC EDGE TRIMMERS CLEANLY CUT NEARLY ANY MAN MADE MATERIAL
|
| Square Cut Ceramic Trimmer
...plus other(s)
|
USE CERAMIC EDGE TRIMMERS TO CLEANLY TRIM LAMINATES, VENEERS AND MELAMINE EDGINGS:
CERAMIC BLADES GIVE THESE TOOLS EXTRA LONG LIFE AND PROVIDE A VERY CLEAN, EVEN FINISH. AVAILABLE IN SQUARE OR CHAMFER CUT; UNIQUE DESIGN LETS YOU TRIM INTO CORNERS. 1-3/16"H X 7/8"W X 3"L. 801-513 - BUY BOTH AT THE SAME TIME AND SAVE! JAPAN.
|
|
|
|
Hand Tools - Scraping & Shaping
|
CABINET SCRAPERS PARTICULARLY EFFECTIVE ON TWISTED OR CURLY WOOD GRAINS
|
| Scraper Blades
...plus other(s)
|
BASED UPON TRADITIONAL CRAFTSMANSHIP, THESE .68MM THICK STEEL CABINET SCRAPERS LEAVE A SILKY SMOOTH FINISH:
CHOOSE FROM STRAIGHT (APPROX. 5" X 2-1/2"), GOOSENECK (APPROX. 4-5/8" X 3") OR CONVEX/CONCAVE (APPROX. 5-7/8" X 2") BLADES. 810-145 - ORDER THE 3 PIECE SET AND SAVE! THE SET WILL HANDLE VIRTUALLY ANY SCRAPING NEED IN YOUR SHOP. ENGLAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
910-991 - "ONE PASS" SCRAPER BURNISHER - CLICK HERE.
|
|
|
|
Hand Tools - Scraping & Shaping
|
GENERAL PURPOSE HOOK SCRAPER HAS REVERSIBLE TUNGSTEN CARBIDE BLADE
|
| Scraper Blades
...plus other(s)
|
THIS DURABLE GENERAL PURPOSE HOOK SCRAPER IS VERY EFFECTIVE FOR SCRAPING FINISHES, PAINT, GLUE, PUTTY, FILLER AND RAW WOOD:
2" WIDE, REVERSIBLE TUNGSTEN CARBIDE BLADE IS RE-SHARPENABLE AND REPLACEABLE TO OFFER A QUICK, CLEAN, SHARP EDGE AS NEEDED - BLADE HELD IN PLACE WITH A WING NUT. STEEL BODY - 7-1/4" O.A.L. WITH 1" DIA. HANDLE. NEW ZEALAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ANANT® BENCH PLANES AND SPECIALTY PLANES PROVIDE DEPENDABLE PERFORMANCE AT AN AFFORDABLE PRICE.
|
| A-110 Block Plane
...plus other(s)
|
THE FIT AND FINISH OF THE CASTINGS IS CLEAN, MACHINED SURFACES ARE FLAT AND EVEN, TROPICAL HARDWOOD HANDLES HAVE A HIGH GLOSS FINISH, AND THE HIGH CARBON STEEL IRON KEEPS AN EDGE VERY WELL. CAST IRON BODIES ARE RIBBED TO ENSURE STRENGTH AND RIGIDITY. MACHINED FROG FACES BED FIRMLY ONTO SIMILAR MACHINED BODY FACES AND ARE FASTENED INTO POSITION WITH SCREWS TO HELP PREVENT CHATTERING:
HIGH CARBON STEEL BLADES ARE HARDENED AND TEMPERED FOR ACCURACY AND UNIFORMITY (A-78 HAS TWO BLADES). HARDWOOD HANDLES AND KNOBS (KNOB ONLY ON BP-110, NO HARDWOOD ON A-77). ONCE FINE TUNED, THESE HAND PLANES CAN EASILY EXCEED YOUR EXPECTATIONS IN ALMOST EVERY WAY.
BP-110 BLOCK PLANE, 7" X 2". A-4 #4 SLICK PLANE, 9-3/4"" X 2-1/2". A-5 #5 JACK PLANE, 14" X 2-1/2". A-5C #5 CORRUGATED PLANE, 14-1/2" X 2-1/2". A-7 #7 JOINTER PLANE, 22" X 2-3/4". A-77 BULLNOSE PLANE, 4" X 1-1/16". A-78 RABBET AND FILLISTER PLANE, 8-1/2" X 2-1/2". A-10 #10 BENCH RABBET PLANE, 12-1/2" X 2-1/8".
IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ALL METAL CLASSIC SPOKESHAVES ARE ALWAYS USEFUL
|
| Flat Face Adjust Spokeshave
...plus other(s)
|
ANANT® FLAT AND ROUND FACE SPOKESHAVES WILL NEVER OUTLIVE THEIR USEFULNESS DUE TO THEIR TRADITIONAL OLD WORLD DESIGN. USED FOR SMOOTHING OUT BUMPS AND RIPPLES ON EDGES CUT BY HAND, SABER OR BAND SAW - PARTICULARLY USEFUL FOR ROUNDING COMPOUND CURVES:
FLAT FACE SPOKESHAVES HANDLE CONVEX AND CONCAVE CURVES EQUALLY WELL - ROUND FACE ARE DESIGNED FOR CONCAVE CURVES (BLADE ENCLOSED WITH EACH TYPE; REPLACEMENT BLADES AVAILABLE, SEPARATELY). A151, A151R - TWO KNURLED THUMBSCREW ADJUSTING NUTS MAKE BLADE SETUPS QUICKER, EASIER AND MORE ACCURATE; 9-3/4" WIDE. A51, A51R - SIMILAR TO A151 MODELS BUT WITHOUT BLADE THUMBSCREW ADJUSTING NUTS. A63, A64 - NO THUMBSCREW ADJUSTING NUTS; 8-1/4" WIDE. ALL FEATURE COMFORTABLE, RAISED CAST IRON DOUBLE HANDLES WITH HANGING HOLES. IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
WORLD-CLASS CLIFTON SPOKESHAVES SEAT FIRMLY AND ADJUST PRECISELY
|
| Clifton 550 Concave Spokeshave
...plus other(s)
|
CLIFTON CONCAVE AND CONVEX SPOKESHAVES FOLLOW THE TRADITIONAL OLD WORLD DESIGN. USE FOR SMOOTHING OUT BUMPS AND RIPPLES ON EDGES CUT BY HAND, JIG SAW OR BAND SAW:
MODEL 550 - CONCAVE SPOKESHAVE SHAPES CURVED SURFACES. MODEL 500 - CONVEX SPOKESHAVE IS ESSENTIAL FOR RECESSED WORK. EACH WEIGHS 15 OZ. AND IS 10" WIDE WITH A 2-1/2" CURVE DIAMETER HSS BLADE - BLADE ADJUSTS WITH A THUMBSCREW. FINISHED AND POLISHED VIRTUALLY UNBREAKABLE SPHEROIDAL GRAPHITE/MALLEABLE IRON BODY. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
NEEDLE RASP SETS GREAT FOR MODEL MAKING, DETAIL CARVING AND SHAPING ODD PIECES
|
| 6 Pc Needle Rasp Set
...plus other(s)
|
GROBET USA® NEEDLE RASP SETS ARE FAST CUTTING FOR USE ON SMALL PROJECTS OR IN TIGHT SPACES AND LEAVE A SMOOTH FINISH:
864-388 - EACH RASP IN THE 6 PIECE SMALL SET IS 5-1/2"L. 864-395 - RASPS IN THE 5 PIECE LARGE SET ARE 8"L. EACH RASP HAS A DIFFERENT PROFILE TO FIT NEARLY ANY SHAPE. SWITZERLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
HIGH QUALITY WOODWORKING RASPS MADE WITH EUROPEAN PRECISION
|
| 8" Flat Second Cut Rasp
...plus other(s)
|
PRODUCED UNDER EXACTING ISO 9001 REQUIREMENTS BY A MORE THAN 200 YEAR OLD COMPANY, 6", 8" AND 10" PFERD WOODWORKING RASPS COME IN DIFFERENT SHAPES FOR VIRTUALLY ALL APPLICATIONS. HARDENED STEEL WITHOUT HANDLES - GREAT FOR QUICK STOCK REMOVAL OR SHAPING ODDLY SHAPED PIECES:
STANDARD RASPS - CUT ON BOTH SIDES, SINGLE CUT ON ONE EDGE AND ARE PARALLEL IN WIDTH. HALF ROUND RASPS - CUT ON BOTH FLAT AND ROUNDED SIDES WITH SINGLE CUT EDGES AND TAPERS TOWARD POINT. ROUND RASPS - USE WHERE SHAPE MAKES THEM PARTICULARLY EFFECTIVE. CABINET RASPS - CURVED SIDES SIMILAR TO HALF ROUND RASPS BUT WITH LARGER RADIUS, SINGLE CUT ON EDGES. STAIRCASE MAKERS' COMBINED FILE AND RASP - FINE, SHARP RASP CUT FOR PRELIMINARY WORK ON HANDRAILS AND ORNAMENTS WITH FILE CUT ON REVERSE FOR FINISHING. GERMANY.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ITALIAN 8 PIECE RIFFLER SET
|
| Italian Style 8 Pc Riffler Set
...plus other(s)
|
8 PIECE RIFFLER SETS LEAVE A FINISH THAT NEEDS JUST A LITTLE SANDING OR DETAIL FILING:
THE MANY DIFFERENT PROFILES OFFER TREMENDOUS VERSATILITY. ITALIAN STYLE SET (864-654) HAS A SMALLER PROFILE THAN THE COARSE SET (864-661). IMPORTED.
|
|
|
|
Hand Tools - Scraping & Shaping
|
SHAVEHOOKS FIT WHERE CABINET SCRAPERS CAN'T REACH
|
| 3 Pc Shavehook Set
|
EXCELLENT FOR SCRAPING IN TIGHT PLACES, THE THREE SHAVEHOOKS IN THIS CROWN TOOLS' SHAVEHOOK SET FEATURE HARDENED AND TEMPERED STEEL BLADES, RIVETED TO SHANKS, WHICH RUN THE FULL LENGTH OF SPECIALLY SHAPED BEECH HANDLES:
TRIANGLE, PEAR AND COMBINATION SHAPES, EACH SHAVEHOOK IS 7-1/2" LONG. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
WARRENSVILLE 8" FILE SPECIALLY SHARPENED FOR LAMINATES
|
| 8" Laminate File
|
SIMILAR IN APPEARANCE TO A MILL FILE, THE WARRENSVILLE 8" LAMINATE FILE IS MADE FROM SPECIALLY HARDENED AND SHARPENED STEEL:
DESIGNED FOR TRIMMING PLASTICS, LAMINATES AND FORMICA® - FINE TEETH ON BOTH SIDES. WEIGHS 3.6 OZ. BRAZIL.
|
|
|
|
Hand Tools - Scraping & Shaping
|
"ONE PASS" BURNISHER MAKES IT EASY TO TURN A PERFECT BURR ON A SCRAPER EDGE
|
| Scraper Burnisher
|
CABINET SCRAPERS WITH 90° EDGES CAN BE USED FOR LIGHT SCRAPING WORK. HOWEVER, TO REMOVE MORE MATERIAL, YOU'LL NEED THE "ONE PASS" BURNISHER TO TURN A BURR ON THE SCRAPER'S EDGE:
3/8" DIA. X 6"L BURNISHER SHAFT IS HIGH QUALITY HIGH SPEED STEEL WITH A COMFORTABLE, PLANTATION GROWN ROSEWOOD HANDLE. TO BURNISH, HOLD SCRAPER FIRMLY IN A PADDED BENCH VISE, APPLY A SMALL AMOUNT OF LUBRICANT ON THE EDGE AND, WHILE HOLDING BURNISHER AT AN ANGLE, RUN IT ALONG THE EDGE OF THE SCRAPER USING MINIMAL PRESSURE. A LIGHT PASS AT 85° WILL TURN A PERFECT BURR ON A HONED SCRAPER BLADE. THE GREATER THE ANGLE THE MORE MATERIAL WILL BE REMOVED; 5° IS SUITABLE FOR FINE FINISHING, WHILE 10° OR MORE CAN BE USED FOR PAINT AND LACQUER REMOVAL. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
TURN YOUR ORDINARY HACKSAW OR STANLEY® SURFORM® INTO AN EXTRAORDINARY WOOD SHAPING TOOL
|
| 2-in-1 Hacksaw Frame Blade
...plus other(s)
|
|
|
|
Hand Tools - Scraping & Shaping
|
TWELVE-PIECE NEEDLE FILE SET WORKS GREAT IN TIGHT SPOTS
|
| 12-pc. Precision Needle File Set
|
THERE ARE SOME PLACES REGULAR FILES JUST CAN'T REACH. THAT'S WHERE YOU'LL USE THE FILES FROM THIS 12-PIECE NEEDLE FILE SET, WHETHER ON WOOD, PLASTIC OR METAL:
ESSENTIAL FOR FINE, INTRICATE WORK ON CARVINGS, MODELS OR JEWELRY BECAUSE THEY GIVE YOU FINER CONTROL THAN LARGER, HEAVIER FILES. HEAT TREATED, HIGH-CARBON ALLOY STEEL - SET INCLUDES 12 SHAPES FOR ANY CUT YOU MIGHT HAVE. 5-1/2" LONG WITH VINYL POUCH. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Recip Saw
|
PORTER-CABLE® TIGER SAW® AND TIGER CLAW™ RECIPROCATING SAW KITS
|
| Tiger Saw Vs Dual Action Recip Saw
...plus other(s)
|
THE PORTER-CABLE® 9748 VARIABLE SPEED, DUAL-ACTION QUIK-CHANGE™ TIGER SAW® KIT CAN BE OPERATED IN THE STRAIGHT RECIPROCAL OR ORBITAL CUTTING MODE:
120VAC, 11.5A MOTOR - 1-1/8" STROKE. 0-2,600 SPM ELECTRONIC VARIABLE SPEED. BACK HANDLE ROTATES FOR INCREASED COMFORT WHEN RIP CUTTING. 17" LONG. 9 LBS. NET WEIGHT; 13.5 LBS. SHIPPING WEIGHT.
THE PORTER-CABLE® TIGERCLAW™ 9750 VARIABLE ANGLE TIGER SAW® COMBINES TWO ADJUSTABLE GEAR HOUSINGS TO HANDLE CUTTING SITUATIONS OTHER RECIPROCATING SAWS CAN'T:
120VAC, 11.5A MOTOR - 1-1/4" STROKE. 0-2,900 SPM ELECTRONIC VARIABLE SPEED. REAR GEAR HOUSING ADJUSTS 180° WITH 13 POSITIVE STOPS. FRONT GEAR HOUSING SCROLLS 360° WITH 12 POSITIVE STOPS. 8-1/2" LENGTH AT 90° - BLADE CAN BE INSTALLED UPSIDE DOWN FOR BETTER REACH IN TIGHT-FITTING APPLICATIONS. 19" LONG. 9.3 LBS. NET WEIGHT; 14 LBS. SHIPPING WEIGHT.
QUIK-CHANGE™ FRONT SHOE CAN BE EXTENDED TO USE MORE OF THE BLADE'S TEETH IN THE CUTTING ACTION. QUIK-CHANGE™ BLADE CLAMP FOR KEYLESS BLADE CHANGES IN SECONDS - ADAPTER ALLOWS UNIVERSAL JIGSAW BLADE USE. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Recip Saw
|
DEWALT® RECIPROCATING SAW KIT
|
| Dw311k Hd Reciprocating Saw Kit
|
THE DEWALT® DW311K HEAVY DUTY RECIPROCATING SAW KIT FEATURES STRAIGHT CUTTING MOTION FOR METAL OR ORBITAL ACTION FOR FASTER WOOD CUTTING:
120V, 13A MOTOR. 1-1/8" STROKE; 0-2,700 SPM. VARIABLE SPEED DIAL MATCHES CORRECT CUTTING SPEED FOR THE APPLICATION. KEYLESS, STAINLESS STEEL BLADE CLAMP. KEYLESS, ADJUSTABLE PIVOTING SHOE. 18" OVERALL LENGTH. 9 LBS. NET WEIGHT; 15 LBS. SHIPPING WEIGHT ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Recip Saw
|
BOSCH POWER HANDSAW PUTS THE FINISHING TOUCHES ON ALL PROJECTS
|
| Finecut Power Handsaw
...plus other(s)
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
MAKITA® 2-1/4HP ROUTERS AVAILABLE WITH VARIABLE SPEED OR D-HANDLE...OR BOTH!
|
| 2-1/4hp Vs Fixed Base Router 1/4" & 1/2"
...plus other(s)
|
THE ELECTRONIC SPEED CONTROLS ON THESE DURABLE 2-1/4HP MAKITA® ROUTERS MAINTAIN CONSTANT SPEED, EVEN UNDER LOAD:
MODEL RF1101 - FIXED BASE ROUTER; VARIABLE SPEED. MODEL RD1101 - D-BASE ROUTER; VARIABLE SPEED. SOFT-START 115V, 11A MOTORS RUN AT 8,000-24,000 RPM. RUGGED ALUMINUM HOUSINGS HAVE SUB-BASES THAT ACCEPT INDUSTRY STANDARD TEMPLATE GUIDES. INDUSTRIAL CAM LOCKS FOR FAST, EASY DEPTH ADJUSTMENT OR MOTOR REMOVAL. LARGE CALIBRATED DEPTH CONTROL RINGS FOR EASY DEPTH ADJUSTMENT. 8-3/4" TALL; 7.9 LBS. EACH INCLUDES 1/4" AND 1/2" COLLETS, TWO WRENCHES AND INSTRUCTION MANUAL. RATED AS THE QUIETEST (81DB) AND SMOOTHEST ROUTERS IN THEIR CLASS. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
MAKITA® 2-1/4HP ROUTER KIT INCLUDES PLUNGE BASE, EDGE GUIDE, LARGER HOLE BASE PLATE AND FITTED CASE
|
| Makita Router2-1/4 Hp Router Kit
...plus other(s)
|
THE MAKITA® MODEL RF1101KIT 2-1/4HP ROUTER KIT PROVIDES LOTS OF VALUE IN ITS ONE FITTED CASE:
MODEL RF1101 FIXED BASE ROUTER HAS A POWERFUL, 115V, 11A SOFT START WITH ELECTRONIC FEEDBACK. 8,000 TO 24,000 RPM FOR SMOOTH CUTS. RUGGED 3-1/4" DIA. ALUMINUM MOTOR HOUSING FOR EASY HANDLING WITH TWO ALL WOOD HANDLES. DURABLE FLAT TOP DESIGN FOR STABILITY WHEN CHANGING BITS. EXTERNALLY ACCESSIBLE CARBON BRUSHES. FIXED BASE FEATURES INDUSTRIAL CAM LOCK FOR FAST AND EASY DEPTH ADJUSTMENT AND REMOVAL OF MOTOR. LARGE CALIBRATED DEPTH CONTROL RING FOR EASY DEPTH ADJUSTMENT. 8-3/4"H; WEIGHS 7.1 LBS.
ENCLOSED PLUNGE BASE HAS A CONVENIENTLY LOCATED PLUNGE LOCK LEVER FOR OPERATOR CONVENIENCE: EASY TO USE FINE DEPTH ADJUSTMENT WITH 3 DEPTH STOPS FOR CONSISTENT PLUNGE CUTTING. NICKEL PLATED PLUNGE POLES PREVENT CORROSION FOR LONGER TOOL LIFE. 2-19/32" MAXIMUM PLUNGE DEPTH. REMOVABLE CLEAR PLASTIC SHIELD. SUB-BASE ACCEPTS INDUSTRY STANDARD TEMPLATE GUIDES. RF1101 ROUTER WITH PLUNGE BASE IS 11-1/2"H; WEIGHS 9.3 LBS.
KIT ALSO INCLUDES 1/2" AND 1/4" COLLETS, DUST NOZZLE ASSEMBLY, STRAIGHT GUIDE ASSEMBLY, CLEAR SUB-BASE (2-1/2" HOLE), THREE REGULAR WRENCHES, ONE HEX WRENCH AND COMPLETE INSTRUCTIONS.
109-502 - MODEL RP1101 IS AN RF1101 ROUTER EQUIPPED WITH A PLUNGE BASE: COMES WITH 1/4" AND 1/2" COLLETS, THREE WRENCHES AND COMPLETE INSTRUCTIONS.
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
PORTER-CABLE® ROUTERS AND TRIMMERS ARE THE STANDARDS OF THE INDUSTRY
|
| 1-3/4hp Fixed Base Router
...plus other(s)
|
PORTER-CABLE® ROUTERS AND TRIMMERS ARE TRUE WORKHORSES, PERFECT FOR MORTISING, DADOS, RABBETS OR INTRICATE EDGE DETAILING:
EACH OF THE FOLLOWING 120V, 11A, 1-3/4HP ROUTERS INCLUDES LEVER RELEASE HEIGHT ADJUSTMENT, AUTO RELEASE COLLET SYSTEM TO END "FROZEN" BITS AND MICROMETER DEPTH OF CUT ADJUSTMENT ACCURATE TO 1/128". EACH INCLUDES BASE (114-740 AND 123-170 INCLUDE FIXED AND PLUNGE BASES), 1/4" AND 1/2" COLLETS, COLLET WRENCHES AND OPERATING MANUAL - 8"H, WEIGHS 8 LBS.
109-739 - MODEL 690LR FIXED BASE ROUTER: 27,500 RPM.
114-740 - MODEL 693LRPK FIXED AND PLUNGE BASE ROUTER: 27,500 RPM. CARRYING CASE INCLUDED.
114-743 - MODEL 9690LR FIXED BASE ROUTER: 27,500 RPM. CARRYING CASE INCLUDED.
118-160 - MODEL 9690VSK FIXED BASE, VARIABLE SPEED ROUTER: NO LONGER AVAILABLE
114-737 - MODEL 690LRVS FIXED BASE, VARIABLE SPEED ROUTER WITH SOFT START: 10,000 RPM TO 27,500 RPM.
108-023 - MODEL 691 D-HANDLE, FIXED BASE ROUTER: 27,500 RPM.
123-170 - MODEL 694VK FIXED AND PLUNGE BASE, VARIABLE SPEED ROUTER KIT: 10,000 TO 27,500 RPM. CARRYING CASE INCLUDED.
118-172 - MODEL 8529 2HP PLUNGE BASE, VARIABLE SPEED ROUTER KIT: 120V, 12A MOTOR - 10,000 TO 23,000 RPM SPEED DIAL. SINGLE WRENCH BIT CHANGES FROM BENEATH SUB-BASE OR ABOVE ROUTER TABLE TOP. THROUGH-THE-BASE DUST COLLECTION. STABLE 6-1/2" BASE DIA. WITH 3-1/2" BIT OPENING. INCLUDES OFFSET WRENCH, TEMPLATE GUIDE ADAPTER, 1/4" AND 1/2" COLLETS AND OPERATING MANUAL.
107-310 - MODEL 310 PRODUCTION LAMINATE TRIMMER: 120V, 4A MOTOR - 27,500 RPM, 1/4" COLLET. COMPACT, LIGHTWEIGHT, ONE-HANDED CONTROL. FLAT TOP DESIGN FOR QUICK BIT CHANGES. MICROMETER RING DEPTH ADJUSTMENT ACCURATE TO ± 0.015". INCLUDES WRENCHES AND OPERATING MANUAL. 7"H, WEIGHS 3-3/4 LBS.
ONE YEAR MANUFACTURER'S WARRANTY.
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
BOSCH 3-1/4HP PLUNGE ROUTER
|
| 3-1/4hp Plunge Router
...plus other(s)
|
THE BOSCH 1619EVS 3-1/4HP ELECTRONIC PLUNGE ROUTER USES A DURABLE ALUMINUM HOUSING TO CUT WEIGHT AND CONSTANT RESPONSE™ CIRCUITRY TO MAINTAIN SPEED UNDER LOAD FOR TOP PERFORMANCE:
120V, 15A, 8,000-21,000 RPM VARIABLE SPEED MOTOR. 2-9/16" PLUNGE DEPTH. 7-1/2" DIA. BASE. SOFT START REDUCES START-UP TORQUE WHILE CONVENIENT FRONT SPINDLE LOCK SPEEDS BIT CHANGES. COARSE TO MICROFINE BIT DEPTH ADJUSTMENT KNOB AND RESETTABLE DEPTH INDICATOR RING. EXCLUSIVE PRECISION CENTERING DESIGN FOR ACCURATE BIT POSITIONING. LARGE BASE OPENING PLUS 2" SUB-BASE OPENING ACCEPT LARGE BITS. EASILY CONVERTS TO ROUTER TABLE USE. COMES WITH DUST EXTRACTION HOOD, VACUUM HOSE ADAPTER, FINE ADJUSTMENT CONTROL EXTENSION, 1/4" AND 1/2" COLLET CHUCKS, 16MM SHAFT WRENCH, 24MM COLLET NUT WRENCH, CHIP SHIELD, TOOL FREE TEMPLET GUIDE ADAPTER AND INSTRUCTIONS. 13.2 LBS. NET WEIGHT; 16.8 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
BOSCH COMBO PACKS FEATURE COMBINATION PLUNGE AND FIXED BASE ROUTERS
|
| 1617evspk Router Kit
...plus other(s)
|
THE BOSCH MODEL 1617EVSPK COMBINATION PLUNGE AND FIXED BASE ELECTRONIC ROUTER PACK OFFERS CAPABILITIES FROM PLUNGING TO EDGE FORMING, LAMINATE TRIMMING, DOVETAILS AND OTHER JOINERY:
120V, 2-1/4HP, 12A, 8,000-25,000 RPM SOFT START MOTOR WITH VARIABLE SPEED DIAL. CONSTANT RESPONSE™ CIRCUITRY MAINTAINS SPEED UNDER LOAD AND PROTECTS AGAINST OVERLOAD. QUICK CLAMP SYSTEM ON BOTH BASES FOR TOOL-FREE CONVERSION. MICROFINE BIT DEPTH ADJUSTMENT SYSTEM. EXCLUSIVE PRECISION CENTERING DESIGN. 6" DIA. BASE WITH 2" SUBBASE OPENINGS. RIGHT OR LEFT SWITCH AND CORD LOCATION. INCLUDES PLUNGE AND FIXED BASES, 1/4" AND 1/2" COLLET CHUCKS, 16MM SHAFT WRENCH, 24MM COLLET NUT WRENCH, T-HANDLE HEX WRENCH, TOOL-FREE TEMPLET GUIDE ADAPTER, FIXED AND PLUNGE BASE CHIP SHIELDS, 10' POWER CORD AND CARRYING CASE. WEIGHS 19.5 LBS. MODEL 1617PK COMBINATION PLUNGE AND FIXED BASE ROUTER PACK IS SIMILAR BUT COMES WITH A 120V, 2HP, 11A, 25,000 RPM MOTOR. MODEL RA1166 PLUNGE BASE CAN BE ORDERED SEPARATELY: 2-5/16" PLUNGE DEPTH. DEPTH ROD FINE ADJUSTMENT AND CHIP SHIELD INCLUDED. WEIGHS 3.4 LBS. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
PORTER-CABLE® MODEL 9690LR 1-3/4 PEAK HP ROUTERS
|
| 1-3/4hp Fixed Base Router W/case
...plus other(s)
|
PORTER-CABLE® MODEL 9690LR 1-3/4 PEAK HP ROUTERS HAVE UNDER TABLE STOPS TO PREVENT MOTORS FROM INADVERTENTLY ROTATING OUT OF THE BASE:
120VAC, 11A, 27,500 RPM MOTOR. AUTO RELEASE COLLET SYSTEM - LEVER RELEASE HEIGHT ADJUSTMENT. PRECISION MACHINED ALUMINUM MOTOR HOUSING AND BASES. INCLUDES 1/4" AND 1/2" AUTO RELEASE COLLETS, 2 COLLET WRENCHES, CARRYING CASE AND OPERATING MANUAL. 8 HIGH, WEIGHS 8 LBS. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
DEWALT® 1-3/4 HP FIXED AND PLUNGE BASE ROUTERS
|
| Dw616 1-3/4 Hp Fixed Base Router
...plus other(s)
|
DEWALT® MODEL DW616, DW616K, DW616D AND DW616PK FIXED AND PLUNGE BASE ROUTERS FEATURE MICO-FINE DEPTH ADJUSTMENT RINGS THAT PROVIDE PRECISE, QUICK DEPTH ADJUSTMENTS IN 1/64" INCREMENTS AND CONSTANT SWITCH AND CORDSET LOCATIONS. OTHER FEATURES INCLUDE:
120VAC, 11A, 24,500 RPM MOTOR. ADJUSTABLE, TOOL FREE MOTOR CAM LOCKS AND QUICK RELEASE MOTOR LATCHES TO ENSURE EASY DEPTH CHANGES, QUICK MOTOR PACK REMOVAL AND SOLID BASE LOCKING. PRECISION MACHINED DIE CAST ALUMINUM BASES, NICKEL PLATED, DIE CAST ALUMINUM MOTOR HOUSINGS, DUST SEALED SWITCHES AND CLEAR LEXAN® SUB-BASES PROVIDE ENHANCED DURABILITY. RUBBER OVERMOLDED HANDLES AND LOW CENTER OF GRAVITY ENSURE COMFORT, BALANCE AND CONTROL. WEIGH 7.1 LBS. ALL INCLUDE 1/2" AND 1/4" ONE PIECE, SELF-RELEASING COLLETS, 2 WRENCHES AND CONCENTRICITY GAUGE TO ENSURE BIT TO SUB-BASE CENTERING. DW616K - INCLUDES CARRYING CASE. DW616D - HAS DETACTABLE CORDSET THAT PLUGS DIRECTLY INTO MOTOR FROM D-HANDLE, ELIMINATING NEED FOR SHORT MOTOR CORD. DW616PK - PLUNGE BASE FEATURES THROUGH-THE-COLUMN DUST COLLECTION, MACHINED BRASS BUSHINGS AND CASE HARDENED STEEL GUIDE RODS. 5/128" MICRO-FINE DEPTH ADJUSTMENT PER TURN. SWITCH AND PLUNGE LEVER LOCATED NEAR HANDLES FOR BETTER CONTROL. INCLUDES VACUUM ADAPTOR AND CARRYING CASE.
ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
DEWALT® 2-1/4 HP ELECTRONIC VARIABLE SPEED PLUNGE AND FIXED BASE ROUTERS FEATURE SOFT START
|
| Dw618 2-1/4hp Vs Fixed Base Router
...plus other(s)
|
DEWALT® MODEL DW618, DW618K, DW618D AND DW618PK ELECTRONIC VARIABLE SPEED ROUTERS PROVIDE CONSTANT SPEED UNDER LOAD FROM 8,000-24,000 RPM AND SOFT STARTS TO SMOOTHLY ROUT THROUGH THE HARDEST MATERIALS:
MICRO-FINE DEPTH ADJUSTMENT RINGS PROVIDE PRECISE, QUICK DEPTH ADJUSTMENTS IN 1/64" INCREMENTS AND CONSTANT SWITCH AND CORDSET LOCATIONS. ADJUSTABLE TOOL-FREE MOTOR CAM LOCKS AND QUICK RELEASE MOTOR LATCHES ENSURE EASY DEPTH CHANGES, QUICK MOTOR PACK REMOVAL AND SOLID BASE LOCKING. PRECISION MACHINED DIE CAST ALUMINUM BASES, NICKEL PLATED, DIE CAST ALUMINUM MOTOR HOUSINGS, DUST SEALED SWITCHES AND CLEAR LEXAN® SUB-BASES PROVIDE ENHANCED DURABILITY. RUBBER OVERMOLDED HANDLES AND LOW CENTER OF GRAVITY ENSURE COMFORT, BALANCE AND CONTROL. SPINDLE LOCK ALLOWS FOR ONE WRENCH BIT CHANGING. ALL INCLUDE 1/2" AND 1/4" ONE PIECE, SELF-RELEASING COLLETS AND CONCENTRICITY GAUGE TO ENSURE BIT TO SUB-BASE CENTERING. WEIGH 7.3 LBS. DW618 AND DW618K - INCLUDE WRENCH AND ADDITIONAL LARGE HOLE SUB-BASE; DW618K INCLUDES CARRYING CASE. DW618D - HAS 2 WRENCHES AND DETACTABLE CORDSET THAT PLUGS DIRECTLY INTO MOTOR FROM D-HANDLE, ELIMINATING NEED FOR SHORT MOTOR CORD. DW618PK - PLUNGE BASE FEATURES THROUGH-THE-COLUMN DUST COLLECTION, MACHINED BRASS BUSHINGS AND CASE HARDENED STEEL GUIDE RODS. SWITCH AND PLUNGE LEVER LOCATED NEAR HANDLES FOR BETTER CONTROL. INCLUDES 2 WRENCHES, VACUUM ADAPTOR AND CARRYING CASE.
ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tools Electric - Routers & Trimmers
|
MAKITA® LAMINATE TRIMMERS WITH LED WORKLIGHTS
|
| Fixed Base Laminate Trimmer W/led
...plus other(s)
|
|
BUILT-IN, SHOCKPROOF, HIGH OUTPUT WHITE LED ILLUMINATES THE CUTTING EDGE. 2-3/8" DIAMETER ERGONOMICALLY DESIGNED BODY. 120V, 4.8A MOTOR WITH 26,000 RPM NO-LOAD SPEED. BASE LOCK SYSTEM WITH THUMB ROLLER FOR FINE ADJUSTMENT. 1-5/8" DEEP CUTTING WHEN TRIM ROUTING. 1/4" COLLET CAPACITY. 117-725 - FIXED BASE TRIMMER IS 8" OVERALL AND HAS A TRIMMER GUIDE FOR USING NON-PILOTED BITS. WEIGHS 2.6 LBS. 117-728 - TILT BASE TRIMMER IS 12-1/2" OVERALL AND ALLOWS TRIMMING OF ANGLED CORNERS AND UP TO VERTICAL SURFACES. WEIGHS 2.9 LBS.
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)
