|
|
|
Abrasives - Misc/flapwheel
|
A&H ABRASIVES™ MOUNTED AND UNMOUNTED ABRASIVE FLAP WHEELS
|
| 1"x1"x1/4" Alox 60x Flap Wheel
...plus other(s)
|
A&H ABRASIVES™ ALUMINUM OXIDE MOUNTED AND UNMOUNTED FLAP WHEELS ARE WELL SUITED FOR DEBURRING, SCALE REMOVAL, CLEANING AND SURFACE PREPARACTION ON FERROUS AND NON-FERROUS METALS, PLASTICS, RUBBER AND WOOD:
MOUNTED FLAP WHEELS HAVE A 1/4" SHANK ALLOWING MOUNTING ON A 1/4" OR LARGER CHUCK - IDEAL FOR HIGH RPM DIE GRINDERS, AIR TOOLS, DRILL MOTORS AND OTHER PORTABLE AND STATIONARY POWER TOOLS. UNMOUNTED FLAP WHEELS ARE BEST FOR A UNIFORM FINISH ON CONTOURED PARTS (METAL, PLASTIC, WOOD) - USE WITH PORTABLE AIR TOOLS, ELECTRIC TOOLS AND BENCH GRINDERS. USA."
|
|
|
|
Abrasives - Misc/flapwheel
|
A&H ABRASIVESTM MOUNTED ABRASIVE FLAP WHEELS
|
| 1"x1"x1/4" Alox 80x Flap Wheel
...plus other(s)
|
A&H ABRASIVES™ ALUMINUM OXIDE MOUNTED FLAP WHEELS ARE WELL SUITED FOR DEBURRING, SCALE REMOVAL, CLEANING AND SURFACE PREPARATION ON FERROUS AND NON-FERROUS METALS, PLASTICS, RUBBER AND WOOD:
MOUNTED FLAP WHEELS HAVE A 1/4" SHANK ALLOWING MOUNTING ON A 1/4" OR LARGER CHUCK - IDEAL FOR HIGH RPM DIE GRINDERS, AIR TOOLS, DRILL MOTORS AND OTHER PORTABLE AND STATIONARY POWER TOOLS. MOUNTED FLAP WHEELS ARE BEST FOR A UNIFORM FINISH ON CONTOURED PARTS (METAL, PLASTIC, WOOD USA.
|
|
|
|
Abrasives - Misc/flapwheel
|
A&H ABRASIVESTM MOUNTED ABRASIVE FLAP WHEELS
|
| 6"x1"x1" Alox 80x Flap Wheel
...plus other(s)
|
A&H ABRASIVES™ ALUMINUM OXIDE UNMOUNTED FLAP WHEELS ARE WELL SUITED FOR DEBURRING, SCALE REMOVAL, CLEANING AND SURFACE PREPARATION ON FERROUS AND NON-FERROUS METALS, PLASTICS, RUBBER AND WOOD:
UNMOUNTED FLAP WHEELS HAVE A 5/8" OR 1" HOLE ALLOWING MOUNTING ON SOME AIR TOOLS, DRILL MOTORS AND OTHER PORTABLE AND STATIONARY POWER TOOLS. UNMOUNTED FLAP WHEELS ARE BEST FOR A UNIFORM FINISH ON CONTOURED PARTS (METAL, PLASTIC, WOOD) - USE WITH PORTABLE AIR TOOLS, ELECTRIC TOOLS AND BENCH GRINDERS. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
INTACAP® KEEPS GRIME AND DIRT OUT OF PNEUMATIC TOOLS
|
| Air Tool End Caps
|
INTACAP® PNEUMATIC TOOL CAPS HELP PREVENT THE WEAR AND TEAR OF DUST AND CONTAMINANTS INSIDE OF AIR-POWERED TOOLS:
PLIABLE, FORM FITTING CAP ON ONE END FITS OVER AND SEALS THE 1/4" AIR TOOL INTAKE CONNECTOR - RING ON OPPOSITE END ATTACHES TO TOOL TO PREVENT LOSS. BRIGHT YELLOW FOR VISIBILITY; SOLD IN PACKAGES OF 5. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
LIGHTWEIGHT HOSE REEL COMES WITH 100 FEET OF HOSE
|
| 100 Ft. Hose Reel
|
THE LIGHTWEIGHT POWERPORT PRODUCTS HOSE REEL WITH HOSE CAN BE WALL MOUNTED OR HAND CARRIED:
UV-STABILIZED POLYPROPYLENE REEL INCLUDES CRANK HANDLE, TOP CARRYING HANDLE AND 5' LONG FULL-FLOW SWIVEL SUPPLY HOSE. CAN ALSO BE WALL MOUNTED. 100' LONG, 3/8" ID PVC AIR HOSE HAS 1/4" NPT FITTINGS - 300 PSI MAXIMUM WORKING PRESSURE. WEIGHS LESS THAN 25 LBS. LIFETIME MANUFACTURER'S WARRANTY.
|
|
|
|
Air Tool Accessories - Hoses
|
PORTER-CABLE® AIR HOSE
|
| 3/8" X 25' Vinyl Air Hose, 1/4"npt
...plus other(s)
|
GIVE YOUR AIR COMPRESSOR A BREAK BY USING ADDITIONAL PORTER-CABLE® VINYL AIR HOSE INSTEAD OF EXTENSION CORDS - YOU'LL GET THE SAME PRESSURE WHILE YOUR COMPRESSOR WILL LAST LONGER AND HAVE MORE POWER:
3/8" - 300 PSI. WILL ACCOMMODATE GRINDERS, SANDERS, DRILLS AND OTHER LARGE AIR TOOLS. 1/4" NPT MALE BRASS FITTINGS SECURED WITH FERRULES ON BOTH ENDS. PREMIUM PVC COVER WITH HEAVY-DUTY SPIRAL REINFORCEMENT. ABRASION RESISTANT, NON MARRING. USA.
|
|
|
|
Bits Driver - Extractors
|
GRABIT® REMOVES DAMAGED OR FREE SPINNING SCREWS EASILY
|
| Grabit Screw Extractor
|
HIGH QUALITY, TOOL STEEL GRABIT® POWER SCREW EXTRACTORS HAVE SERRATED EDGES FOR AGGRESSIVE PERFORMANCE, MEANING THEY WILL WORK ON MOST HEX, PHILLIPS, POZI, TORX® AND SQUARE HEAD FASTENERS - EVEN NO.6 TO NO.14 MECHANICAL SCREWS:
BURNISHING END IS FIRST USED TO REMOVE FASTENER'S CASE HARDENED LAYER AND CREATE A GRIPPING SURFACE. THEN, THE OPPOSITE REMOVER END CAN GRIP THE SCREW AND REMOVE IT FROM WOOD, METAL OR PLASTIC. USE 1/4" HEX SHANK EXTRACTORS WITH A VARIABLE SPEED, REVERSIBLE DRILL OR MANUALLY WITH A 1/4" HEX NUT DRIVER. SUITABLE FOR ALMOST ANY ALLOY FASTENER, INCLUDING SOFT BRASS. TWO DIFFERENT DIAMETER EXTRACTORS (EACH APPROXIMATELY 2" LONG), 5/8"H X 3-3/8"W X 2-1/2"D PLASTIC STORAGE CASE AND COMPLETE INSTRUCTIONS INCLUDED. NOTE: EXTRACTOR CAN BE COMPROMISED IF REMOVING LARGE SCREWS EXCEEDING 2" IN LENGTH AND/OR HAVING AGGRESSIVE THREADS. IMPORTED.
|
|
|
|
Books
|
CELTIC WOODCRAFT AUTHENTIC PROJECTS FOR WOODWORKERS
|
| Celtic Woodcraft
|
|
THEIR WORKS HAVE ALL BUT DISAPPEARED, BUT WOODWORKERS WERE SOME OF THE MOST PROLIFIC ARTISANS OF CELTIC CULTURES. TWENTY OF THE MOST POPULAR CELTIC DESIGNS APPEAR IN PATTERNS JUST FOR WOODWORKERS, BASED ON SURVIVING STONE-CARVED AND IRON-ENGRAVED VERSIONS OF KNOTWORK, BORDERWORK, OVERLAYS, AND OTHER INTRICACIES DATING BACK TO STONE-AGE TRIBAL WEAPONS AND MEDIEVAL RELIGIOUS SYMBOLS. USE YOUR REGULAR HAND OR POWER TOOLS TO FASHION CELT-INSPIRED PROJECTS SUCH AS AN EAGLE WALL PLAQUE, MIRRORED CANDLE SCONCE, COASTERS IN A HOLDER, TREE OF LIFE SEEDKEEPER, DRAGON TRINKET BOX, AND CELTIC CROSS, ALONG WITH A VARIETY OF PICTURE FRAMES, MESSAGE BOARDS, AND HAND MIRRORS. INSTRUCTIONS ALSO SHOW HOW TO TRANSFER DESIGNS FROM OTHER CELTIC ARTBOOKS AND APPLY THEM IN YOUR OWN ORIGINAL WORKS. 8 1/4 X 10 7/8. ALL IN COLOR, 128 PAGES, PAPERBACK.
|
|
|
|
Books
|
CLASSIC JOINTS WITH POWER TOOLS
|
| Classic Joints With Power Tools
|
|
DO YOU LOVE WOODWORKING---BUT BALK AT THE THOUGHT OF HAND-CHISELING A MORTISE AND TENON JOINT? THEN THESE 100 MARVELOUS ALTERNATIVES ARE JUST RIGHT FOR YOU: JOINTS TO CUT USING POWER TOOLS ALONE, SIMPLIFYING THE PROCESS AND GUARANTEEING SUPERB RESULTS EVERY TIME. AN EXPERIENCED WOODWORKER AND TEACHER TAKES YOU THROUGH ALL THE COMMON WOODSHOP TOOLS-TABLE SAW, BANDSAW, ROUTER, MORTISING MACHINE, BISCUIT JOINTER, DRILL PRESS, AND PLENTY OF SHOP-MADE JIGS--SHOWING HOW EACH CAN FORM PERFECT, TIGHT-FITTING JOINTS. AND, DON'T WORRY IF YOU LACK A PARTICULAR PIECE OF EQUIPMENT: THE SAME JOINT CUT BY A BANDSAW CAN BE DONE WITH A ROUTER OR OTHER TOOL. HUNDREDS OF COLOR PHOTOS AND ILLUSTRATIONS DETAIL HOW TO SET UP THE NECESSARY MACHINES AND ACCESSORIES FOR EVERYTHING FROM SIMPLE DOWELS, SPLINES, OR BISCUITS TO MORE CHALLENGING MITERS, RABBETS, TONGUE-AND-GROOVE, MORTISE-AND-TENON, DOVETAILS, AND BOX JOINTS. YOU'LL HAVE CLASSIC JOINTS FOR ALL YOUR PROJECTS IN HALF THE TIME OF DOING THEM BY HAND. 8 1/2 X 10. ALL IN COLOR. 176 PAGES, PAPERBACK W/FLAP.
|
|
|
|
Books
|
RESIDENTIAL FRAMING A HOMEBUILDER'S CONSTRUCTION GUIDE
|
| Residential Framing
|
|
"OPENS THE SUBJECT TO ANYONE...STARTS OUT WITH DETAILED COVERAGE OF STANDARD BUILDING MATERIALS AND UP-TO-DATE HOW-TO INFORMATION ABOUT MODERN POWER TOOLS AND SAFETY REQUIREMENTS...EXPLORES ALL THE STANDARD FRAMING METHODS FOR FLOORS, WALLS, CEILINGS AND ROOFS...DEMYSTIFIES SOME OF THE MORE OBSCURE TASKS, SUCH AS BUILDING GABLE DORMERS, MULTIPLE-PITCHED ROOFS, STAIRCASE CONSTRUCTION AND STRUCTURAL FOUNDATIONS. THERE'S EVEN A SECTION DEVOTED TO POST-AND-BEAM CONSTRUCTION. THE BOOK CONCLUDES WITH A DISCUSSION ABOUT DOOR AND WINDOW INSTALLATION, EXTERIOR SIDING AND INTERIOR FINISHING."--POPULAR MECHANICS. 320 PAGES, 654 B/W ILLUS., 8 1/4 X 11. 8 1/4 X 11. 654 B/W ILLUS., PAPERBACK.
|
|
|
|
Books
|
WOODCARVING©
|
| Weekend Crafter: Woodcarving
|
|
FROM A REVIEW OF TOOLS AND TECHNIQUES TO ADVICE ON SANDING AND FINISHING TO AN ARRAY OF QUICK AND WONDERFUL PROJECTS, THIS GUIDE HAS IT ALL. BEGIN BY FOLLOWING THE TIPS ON SELECTING KNIVES, GOUGES, SAWS, POWER TOOLS, AND SPECIALTY CUTTING EQUIPMENT. MASTER THE MAJOR CUTS AND SEE HOW TO TRANSFER PATTERNS OR TEMPLATES TO THE WOOD. SOFTCOVER, 8-1/2" X 11", 80 PAGES.
|
|
|
|
Books
|
ILLUSTRATED GUIDE TO USING WOODWORKING TOOLS
|
| Illust Guide To Using Woodworking Tools
|
THIS STEP-BY-STEP PICTORIAL REFERENCE COVERS USING ALL THE TOOLS FOUND IN A MODERN WOODWORKING SHOP. ORGANIZED FOR QUICK ACCESS, THIS BOOK MAKES IT EASY TO FIND EXACTLY THE TECHNIQUE YOU ARE LOOKING FOR. OVER 850 PHOTOS AND DRAWINGS ILLUSTRATE USING HAND AND POWER TOOLS, INCLUDING CHOOSING THE RIGHT TOOL FOR THE JOB, SETTING IT UP, AND BASIC AND SPECIAL OPERATIONS.
WRITTEN BY LONNIE BIRD, WHO FOR MANY YEARS RAN A UNIVERSITY WOODWORKING PROGRAM. HE LIVES IN DANDRIDGE, TENNESSEE, WHERE HE MAKES 18TH-CENTURY FURNITURE AND OPERATES A WOODWORKING SCHOOL. AMONG THE TOPICS COVERED:
CHOOSING THE RIGHT TOOL MASTERING HAND-TOOL SKILLS SETTING UP MACHINES MAKING ACCURATE CUTS USING JIGS AND FIXTURES HARDCOVER, 9-3/16 X 10-7/8 IN., 288 PAGES, WITH COLOR PHOTOS AND DRAWINGS.
|
|
|
|
Books
|
DEWALT® PROFESSIONAL REFERENCE MANUALS AND EXAM GUIDES
|
| Construction Professional Ref
...plus other(s)
|
POWERFUL TOOLS THAT SAVE TIME AND MONEY, DEWALT® PROFESSIONAL REFERENCE MANUALS AND EXAM GUIDES PROVIDE A WEALTH OF USEFUL INFORMATION IN A SINGLE SOURCE:
CONSTRUCTION PROFESSIONAL REFERENCE DCONP00: FRAMING, HARDWARE SIZING, CORRECT NAILING PATTERNS, STAIRWAY STRINGERS, WALLS AND ROOFING, FLOORING AND TILE, ROOF PITCHES AND MORE. ELECTRICAL PROFESSIONAL REFERENCE - ENGLISH EDITION DEPO500: VALUABLE, TIME SAVING INFORMATION ON ELECTRICAL FORMULAS AND WIRING. INCLUDES WIRE AMP CAPACITY, CONDUIT AND BOX FILL, RACEWAYS AND WIRING SPECIFICATIONS, MOTORS, OVERLOAD PROTECTION, TRANSFORMERS AND MORE. DSPEP02 ELECTRICISTA REFERENCIA PROFESIONAL - SPANISH EDITION. PLUMBING PROFESSIONAL REFERENCE DPPR000: COVERS SIZING PIPE AND FITTINGS, CALCULATING WATER DEMAND, FINDING INSTALLATION REQUIREMENTS AND SPECIFICATIONS, DESIGNING AND INSTALLING DRAINAGE AND SEWER SYSTEMS AND MORE. WIRING DIAGRAMS PROFESSIONAL REFERENCE DWDPR00: PACKED WITH HUNDREDS OF EASY TO FOLLOW DIAGRAMS COVERING OUTLETS AND SWITCHES, ELECTRICAL SERVICE, LIGHTING, POWER DISTRIBUTION, TRANSFORMERS, OVERLOAD PROTECTION, MOTORS AND CONTROLS AND MORE. ELECTRIC MOTOR PROFESSIONAL REFERENCE DEMPR00: INCLUDES RUNNING CURRENTS, WIRING DIAGRAMS, LOCK ROTOR AMPS, INSTALLATION REQUIREMENTS, THERMAL OVERLOADS, MAINTENANCE PROCEDURES AND MORE. LIGHTING AND MAINTENANCE PROFESSIONAL REFERENCE DLMPR0: PART 1 COVERS THE DESIGN, SELECTION AND INSTALLATION REQUIREMENTS OF LIGHTING SYSTEMS FOR RESIDENTIAL, COMMERCIAL AND INDUSTRIAL APPLICATIONS. PART 2 CONTAINS VALUABLE INFORMATION REGARDING ELECTRICAL AND GENERAL MAINTENANCE INCLUDING CRITICAL ELECTRICAL SAFETY ISSUES. OVER 375 PAGES, EACH, INCLUDING EASY TO READ CHARTS AND ILLUSTRATIONS. 4" X 6" BOOKS EASILY FIT INTO A TOOLBOX OR POCKET - BINDING ALLOWS BOOK TO LAY FLAT WHEN OPENED. SEMI-SYNTHETIC COVER MATERIAL PROVIDES FLEXIBILITY, DURABILITY AND WATER AND OIL RESISTANCE. ELECTRICAL LICENSING EXAM GUIDE DELEG00: CAN BE USED IN EVERY STATE - BASED UPON 2005 NATIONAL ELECTRICAL CODE®. COVERS JOURNEYMAN, CONTRACTOR, MASTER, MAINTENANCE, RESIDENTIAL AND SIGN LICENSING EXAMS. SAMPLE EXAMS INCLUDE ANSWER KEYS WITH CORRESPONDING NEC® REFERENCES. 8-1/2" X 11", 272 PAGES. HVAC TECHNICIAN CERTIFICATION EXAM GUIDE DHTCE00: MOST COMPLETE AND COMPREHENSIVE GUIDE AVAILABLE. COVERS NORTH AMERICAN TECHNICIAN EXCELLENCE, INSTITUTION OF CIVIL ENGINEERING AND REFRIGERATION SERVICE ENGINEERS SOCIETY REQUIREMENTS PLUS HVAC TECHNICAL LICENSING EXAMS. ALSO COVERS STATE LIMITED ENERGY LICENSE AND HVAC CONTRACTOR LICENSING. 8-1/2" X 11", 240 PAGES.
|
|
|
|
Books
|
THE COMPLETE GUIDE TO SHARPENING©
|
| The Complete Guide To Sharpening
|
TOOL EXPERT LEONARD LEE HAS CONSOLIDATED A LIFETIME OF STUDY OF SHARPENING METHODS, TECHNIQUES AND DEVICES INTO THE MOST PRACTICAL REFERENCE BOOK ON THE SUBJECT. WITH THE COMPLETE GUIDE TO SHARPENING©, YOU'LL DISCOVER THE MOST EFFECTIVE WAYS TO SHARPEN YOUR TOOLS:
GET BETTER EDGES THAN ON MOST RAZOR BLADES AND LEARN HOW TO SHAPE EDGES TO CUT BETTER AND STAY SHARP LONGER. CHAPTERS COVER SHARPENING EQUIPMENT AND HOW TO SHARPEN CHISELS, PLANES, KNIVES, CARVING TOOLS, TURNING TOOLS, SCRAPERS, HANDSAWS, AXES, HATCHETS, ADZES, POWER SAW BLADES, DRILL BITS, MILLING CUTTERS AND OTHER SHOP TOOLS. SOFTCOVER, 8-3/4" X 11-7/8", 256 PAGES WITH BLACK AND WHITE PHOTOS AND DRAWINGS.
|
|
|
|
Chemicals - Lubricants
|
SLIPIT® LUBRICANTS ARE SPECIFICALLY DESIGNED FOR WOODWORKING
|
| Slipit Sliding Compound Gel
...plus other(s)
|
REPLACE ALL OF THOSE CANS OF MACHINE OIL, SILICONE, PASTE WAX OR OTHER PRODUCTS WITH SINGLE CONTAINERS OF SLIPIT®, SPECIFICALLY FORMULATED TO LUBRICATE AND PROTECT ALMOST ANYTHING. PRODUCTS ARE NON-GUMMING, ATTRACT LESS SAWDUST AND LAST LONGER:
909-314 - SIL-FREE SLIDING COMPOUND® 16 OZ. CAN: GEL FORMULA FOR TOOLS, TABLE SAWS, MITER GAUGE SLOTS AND RUNNERS, FENCES, RAILS AND TRUNNIONS. ALSO REDUCES FRICTION ON WOODEN WINDOWS, DOORS, DRAWERS OR ANYWHERE WOOD COMES IN CONTACT WITH WOOD. WON'T HARM FINISHED WOOD SURFACES; APPLY WITH A BRUSH. 921-103 - SIL-FREE TOOL LUBE® 12 OZ. NON-FLAMMABLE AEROSOL CAN: CONVENIENT SPRAY ON LUBRICATION FOR POWER AND HAND TOOLS, MOVING PARTS, BITS, CUTTING BLADES AND ROUTERS. INHIBITS RUST AND CORROSION. 921-614 - SIL-FREE LIQUI-FORM® 16 OZ. PUMP SPRAYER: SUITABLE FOR BANDSAW BLADES, TABLES, ROUTERS, SHAPERS, JOINTERS AND MORE. REDUCES DRAG AND PROLONGS TOOL LIFE. NON FLAMMABLE; NO CFCS; NON TOXIC; SILICONE FREE. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Chemicals - Lubricants
|
SLIPIT TOOL AND DRAWER LUBRICANT
|
| Slipit Tool Lube Aerosol
...plus other(s)
|
REPLACE ALL OF THOSE CANS OF MACHINE OIL, SILICONE, PASTE WAX OR OTHER PRODUCTS WITH SINGLE CONTAINERS OF SLIPIT®, SPECIFICALLY FORMULATED TO LUBRICATE AND PROTECT ALMOST ANYTHING. PRODUCTS ARE NON-GUMMING, ATTRACT LESS SAWDUST AND LAST LONGER:
SIL-FREE TOOL LUBE® 12 OZ. NON-FLAMMABLE AEROSOL CAN: CONVENIENT SPRAY-ON LUBRICATION FOR POWER AND HAND TOOLS, MOVING PARTS, BITS, CUTTING BLADES AND ROUTERS. INHIBITS RUST AND CORROSION. SIL-FREE LIQUI-FORM® 16 OZ. PUMP SPRAYER: SUITABLE FOR BANDSAW BLADES, TABLES, ROUTERS, SHAPERS, JOINTERS AND MORE. REDUCES DRAG AND PROLONGS TOOL LIFE. SIL-FREE SLIDING COMPOUND® 16 OZ. CAN: GEL FORMULA FOR TOOLS, TABLE SAWS, MITER GAUGE SLOTS AND RUNNERS, FENCES, RAILS AND TRUNNIONS. ALSO REDUCES FRICTION ON WOODEN WINDOWS, DOORS, DRAWERS OR ANYWHERE WOOD COMES IN CONTACT WITH WOOD. WON'T HARM FINISHED WOOD SURFACES; APPLY WITH A BRUSH.
NON FLAMMABLE; NO CFCS; NON TOXIC; SILICONE FREE. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
NEW BESSEY® KLIKLAMP CAN APPLY LIGHT-AS-A-FEATHER UP TO 330 LBS. PRESSURE
|
| 4" Kliklamp
...plus other(s)
|
USING A MAGNESIUM JAW, GLASS-FIBER REINFORCED, POLYAMID LEVER AND STEEL RAIL, THE BESSEY® KLIKLAMP PROVIDES QUICK CLAMPING AND QUICK RELEASE ON VIRTUALLY ANY SHAPE OBJECT:
RATCHET ACTION RESISTS VIBRATION, MAKING CLAMP IDEAL FOR USE AROUND POWER TOOLS. 3" NOMINAL THROAT DEPTH. LIFETIME MANUFACTURERS WARRANTY. GERMANY.
|
|
|
|
Clothing - Aprons
|
WOODTEK® RUGGED LEATHER APRON
|
| Leather Apron
|
OUR RUGGED LEATHER APRONS ARE IDEAL FOR TAKING THE ABUSE AND ABRASIONS OF WOODWORKING. OUR RUGGED LEATHER APRONS ARE IDEAL FOR TAKING THE ABUSE AND ABRASIONS OF WOODWORKING. BESIDES PROTECTING CLOTHES, THIS LEATHER APRON HELPS PREVENT LOOSE CLOTHING FROM BEING WHERE IT SHOULDN'T BE (LIKE NEAR A POWER TOOL):
THREE DOUBLE-STITCHED POCKETS HAVE PLENTY OF ROOM FOR PENCILS, A MEASURING TAPE, RULERS, ETC. - GROMMETS AND RIVETS MAKE THE POCKETS EXTRA DURABLE. CANVAS WEB SUSPENDERS CROSS OVER THE BACK IN AN X SHAPE AND USE ADJUSTABLE SNAP-LOCK CONNECTORS FOR A COMFORTABLE FIT. 32-1/2" LONG FRONT. FITS OVER MOST FOLKS WEARING A S-L SHIRT SIZE. IMPORTED.
|
|
|
|
Dust Collection - Not Listed Elsewhere
|
PORTER-CABLE® 10 GALLON WET/DRY VACUUM STARTS WHEN TOOL IS TURNED ON
|
| 7812 10 Gallon Wet/dry Vac
...plus other(s)
|
THE PORTER-CABLE® MODEL 7812 10 GALLON WET/DRY VACUUM IS GREAT FOR FINE PARTICULATE PICKUP LIKE DRYWALL OR SOLID SURFACE DUST. FEATURES INCLUDE:
120V, 9A MOTOR. BUILT-IN OUTLET FOR POWER TOOL (NOTE: POWER TOOL NOT TO EXCEED 120V, 6A) - VACUUM STARTS WHEN TOOL IS TURNED ON. 15 SECOND VACUUM OVERRUN CLEARS HOSE WHEN TOOL IS TURNED OFF. 99.85% FILTRATION EFFICIENCY @ 114 CFM. DUAL FILTRATION SYSTEM WITH WASHABLE AUTOMOTIVE TYPE PAPER FILTER AND 2 PLY, 10 GALLON PAPER FILTER BAG. CORROSION RESISTANT POLYPROPYLENE TANK; LARGE WHEELS FOR EASY MANEUVERING. INCLUDES HOSE AND OPERATING MANUAL. WEIGHS 26-1/4 LBS. ONE YEAR MANUFACTURER'S WARRANTY.
|
|
|
|
Dust Collection - Not Listed Elsewhere
|
SHOP-VAC® INDUSTRIAL ON-DEMAND-VAC™ SWITCHES ON WHEN POWER TOOL IS TURNED ON
|
| On Demand Vac Wet/dry Vacuum
...plus other(s)
|
TO USE THE 12 GALLON, SHOP-VAC® INDUSTRIAL WET/DRY ONDEMANDVAC™, PLUG IT INTO A 120V OUTLET, ATTACH THE VAC DUST HOSE TO YOUR 120V POWER TOOL EXHAUST PORT, PLUG THE TOOL INTO THE VACUUM AND, WHEN YOU TURN ON THE TOOL, THE VACUUM AUTOMATICALLY STARTS:
MODEL 925-63 FEATURES A POWERFUL 6 HP (PEAK), 10A MOTOR; THREE POSITION SWITCH - ON/OFF/AUTO. HANDLES POWER TOOLS UP TO 8A. 50% QUIETER THAN A STANDARD SHOP-VAC®. FEATURES LOCKON™ POSITIVE CONNECTION HOSE SYSTEM AND ONBOARD TOOL STORAGE. INCLUDES 1-1/4" DIA. X 12'L HOSE, TWO 1-1/4" DIA. EXTENSION WANDS, 10" COMBINATION NOZZLE AND SQUEEGEE, DUAL SURFACE SELECTOR NOZZLE, "GULPER" NOZZLE, ROUND BRUSH, CREVICE TOOK, UNIVERSAL TOOL ADAPTER, CARTRIDGE FILTER, FINE DUST COLLECTION FILTER BAG AND 18'L CORD. ONE YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Dust Collection - Not Listed Elsewhere
|
FEIN TURBO WET/DRY VACUUMS ARE POWERFUL, QUIET AND HAVE A TOOL-ACTIVATED SWITCH
|
| Turbo I-vs Wet/dry Vacuum 6 Gal
...plus other(s)
|
|
POWERFUL AND LOW NOISE LEVEL FOR PERFORMANCE AND COMFORT. TOOL ACTIVATED SWITCH TURNS ON VACUUM WHEN CONNECTED TOOL IS USED. LONG CORD AND HOSE ARE CONVENIENT STANDARD EQUIPMENT. 5 MICRON FABRIC BOOT FILTER CAN BE WASHED AND REUSED. LARGE FOOTPRINT MAKES VACUUM EXTREMELY STABLE. 2-STAGE MOTOR WITH BY-PASS COOLING TECHNOLOGY TO PREVENT HEAT DAMAGE. COPOLYMER PLASTIC TANK WILL NOT RUST OR CORRODE IN WET APPLICATIONS. ONE YEAR MANUFACTURERS WARRANTY, ITALY. NOTE: DUST BAGS & HEPA FILTERS FIT NEW AND OLD MODELS.
|
|
|
|
Hand Tools - Carving Tools
|
FLEXCUT™ 21 PIECE DELUXE STARTER SET HAS EVERYTHING TO GET STARTED CARVING
|
| 21 Pc Deluxe Starter Set
|
OUR DELUXE STARTER SET HAS EVERYTHING A NEW WOOD CARVER NEEDS. IT INCLUDES 16 INTERCHANGEABLE BLADES, CUTTING KNIFE, QUICK CONNECT HANDLE AND A MALLET POWER HANDLE. THERE'S ALSO A SLIPSTROP, GOLD COMPOUND AND AN OWNER'S MANUAL SHOWING HOW TO CARE FOR YOUR TOOLS. PLUS YOU'LL FIND A FREE STEP-BY-STEP DVD FOR A GREAT FIRST PROJECT. THIS IS OUR MOST COMPLETE CARVING SET ALL IN ONE BOX. THE FOLLOWING 16 GOUGE PROFILES FEATURED IN THIS KIT ARE NOT INCLUDED IN ANY OTHER FLEXCUT SK CARVING SET.
. #1 SK406 (5/8") CHISEL #2 SK407 (9/16") SKEW #3 SK323 (1/4") GOUGE #3 SK700 (7/8'') GOUGE #5 SK601 (1/8") GOUGE #6 SK446 (1/2") GOUGE #8 SK428 (1/4") GOUGE #8 SK402 (3/8'') GOUGE #8 SK702 (11/16'') GOUGE #9 SK703 (9/16") GOUGE #11 SK602 (1/16") GOUGE #11X SK725 (3/16") THUMBNAIL GOUGE #11X SK927 (1/2'') THUMBNAIL GOUGE #45° SK317 (5/32") V-TOOL #70° SK403 (3/8") V-TOOL #SK754 (7/8") BACK BEND GOUGE #USA
|
|
|
|
Hand Tools - Not Listed Elsewhere
|
FROM POWER CHOPPING TO FINE EDGE CUTTING, THESE HAND AXES DO IT ALL
|
| Firestone Handaxe
...plus other(s)
|
ERGONOMICALLY DESIGNED FIRESTONE HAND AXES REPRESENT THE ULTIMATE IN LIGHTWEIGHT VERSATILITY FOR OUTDOOR CHORES. ALL INCLUDE HANDCRAFTED, FULL GRAIN LEATHER BELT SHEATHS FOR "HANDLE UP" OR "HANDLE DOWN" CARRYING AND LIFETIME MANUFACTURER'S WARRANTIES:
117-935 - HANDAXE WEIGHS 12.5 OZ. AND IS 12" OVERALL; 3-5/8"W X 4-1/2"L BLADE. 117-938 - POCKETAXE WEIGHS 6.75 OZ. AND IS 9" OVERALL. BLADES AND TANGS ARE 1/8" THICK, 420 STAINLESS STEEL, HARDENED TO RC52/53. HOLLOW GROUND BLADES ARE HARD ENOUGH TO HOLD A KNIFE EDGE, BUT RESILIENT TO PREVENT CHIPPING. REINFORCED POLYSTYRENE HANDLES ARE TEXTURED FOR POSITIVE GRIP. HANDLE DESIGN ALLOWS AXES TO BE HELD COMFORTABLY FOR CHOPPING AND EDGE CUTTING. IMPORTED.
117-941, 117-944 - UTILITYAXE AND CARVINGAXE ARE DESIGNED FOR RUGGED OUTDOOR USE: UTILITYAXE WEIGHS 1 LB., 6 OZ. AND IS 12.5" OVERALL; 5"W X 4-1/2"L HOLLOW GROUND BLADE (CARVINGAXE HAS SAME HEAD DESIGN BUT DIFFERENT HANDLE ANGLE). HEADS ARE 440 STAINLESS STEEL, BEAD BLASTED FOR A QUALITY SATIN FINISH AND SECURED TO LAMINATED BIRCH HANDLES WITH SET SCREWS AND STAINLESS STEEL ROLL PINS. USA.
931-555 - VIKING BEARDED HAND AXE BLADE IS INVESTMENT CAST, HIGH CARBON 440C STAINLESS STEEL; HEAT TREATED AND ANNEALED TO HOLD A KNIFE-LIKE EDGE THROUGH THE HEAVIEST CUTTING, CHOPPING AND SKINNING TASKS. HANDLE IS A HANDCRAFTED MASTERPIECE OF LAMINATED FINNISH BIRCH AND IS SECURED BY A HARDENED STEEL SET SCREW AND SPRING STEEL ROLL PIN. USA. 117-938 IS LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hand Tools - Not Listed Elsewhere
|
PUSH-PULL SCREWDRIVER/DRILL WORKS LIKE A YANKEE®
|
| Push Pull Drill/driver
...plus other(s)
|
THE EAZYPOWER® ISOMAX® 17" PUSH-PULL SCREWDRIVER/DRILL MAKES QUICK WORK OF JOBS WHERE ELECTRICAL POWER IS NOT BE READILY AVAILABLE - ACCEPTS ALL STANDARD 1/4" HEX SHANK ADAPTERS, DRILL BITS AND POWER BITS:
WITH LOCK CONTROL "ON," TOOL CAN BE USED AS A 12" LONG RATCHETING SCREWDRIVER. FOR DRILLING, TURN THE LOCK "OFF" AND A SPRING LOADED SHAFT EXTENDS TOOL LENGTH TO 17". MOVE THE RATCHET SWITCH "UP" FOR CLOCKWISE DRILLING OR "DOWN" FOR COUNTERCLOCKWISE, INSTALL BIT AND PROCEED. COMES WITH 3" LONG #1, #2 PHILLIPS® POWER BITS, 3" LONG 6-8, 8-10 SLOTTED POWER BITS AND A 1/4" HEXBIT® DRILL BIT (OTHER ACCESSORIES SHOWN NOT INCLUDED). 141-584 - 12" PUSH-PULL SCREWDRIVER/DRILL IS SIMILAR BUT 9-1/2" LONG, EXTENDING TO 12". INCLUDES #1, #2, #3 PHILLIPS® POWER BITS, 4, 5, 8, 10 SLOTTED POWER BITS PLUS #2 SQUARE AND T15 TORX® POWER BITS. MANUFACTURER GUARANTEES SCREWDRIVER/DRILL AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP. IMPORTED.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
1/4" HEX SHANK KEYLESS CHUCK - 26-922. FOR ADDITIONAL DRIVER DRILL BITS AND ACCESSORIES, PLEASE VISIT THE WOODWORKER'S SUPPLY® WEB SITE.
|
|
|
|
Hand Tools - Striking
|
WOODEN CARVER'S MALLETS OFFER POWER AND CONTROL
|
| 16 Oz Wooden Carving Mallet
...plus other(s)
|
STUBAI WOODEN CARVER'S MALLETS ARE MADE FROM QUALITY BEECHWOOD AND HAVE ROUND HEADS SO FORCE IS CENTERED AND THEY WON'T SPIN WHEN YOU HIT AN EDGE:
SELECT THE 16 OZ. MALLET FOR EASIER WORKING OR THE HEAVIER 20 OZ. FOR TAKING AWAY LOTS OF WOOD - EACH IS 11-1/2" LONG. SINCE EACH TAP OF THE MALLET GIVES YOU BASICALLY THE SAME DEPTH OF CUT, CREATING AN EVEN BORDER OR FRAME WITH A CHISEL AND MALLET IS EASY. USA AND AUSTRIA.
|
|
|
|
Hand Tools - Striking
|
NON-MARRING DEADBLOW HAMMERS IN SIX SIZES
|
| Deadblow Hammer-1lb.
...plus other(s)
|
FILLED WITH LEAD SHOT FOR EXTRA FORCE AND SHOCK ABSORPTION, DEADBLOW HAMMERS WILL GIVE YOU THE POWER YOU NEED WHEN ASSEMBLING OR DISASSEMBLING PROJECTS:
LENGTHS RANGE FROM 8-3/4" TO 13-1/4". TEXTURED HANDLE GRIPS HELP ENSURE NON-SLIP CONTROL. IMPORTED.
|
|
|
|
Hand Tools - Turning
|
PRO-FORME HOLLOWING TOOL SYSTEM
|
| Powerhead Cutter W/gauge
...plus other(s)
|
THE WOODCUT® PRO-FORME HOLLOWING TOOLS ARE SOME OF THE MOST EFFECTIVE TURNING TOOLS AVAILABLE FOR DEEP HOLLOWING AND GENERAL ROUGHING WORK. THESE EFFICIENT TOOLS QUICKLY REMOVE LARGE AMOUNTS OF MATERIAL WITHOUT THE FEAR OF CATCH AND DIG-IN. THE SYSTEM INCLUDES THREE BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. THREE DIFFERENT 5/8" DIAMETER BORING BARS ARE AVAIABLE: STRAIGHT FOR GENERAL CUTTING OPERATIONS, SLIGHT BEND FOR INSIDE WALL CUTTING AND HEAVY BEND FOR INSIDE WALL AND UNDER-RIM CUTTING. THE REPLACEABLE POWERHEAD CUTTERS HAVE AN ADJUSTABLE GAUGE FOR LIGHT OR AGGRESSIVE CUTTING OPERATIONS AND THE PROMASTER 20" HANDLE WILL EXTEND REACH TO 10" BEYOND TOOL REST. AN OPTIONAL PRO-SCRAPER ASSEMBLY IS DESIGNED FOR HIGH-SPEED SURFACE FINISHING OPERATIONS:
PRECISION POWERHEAD CUTTERS FEATURE TRIPLE-TEMPERED HIGH SPEED STEEL WITH AN OPEN-SIDED HOOK TO ALLOW SHAVINGS TO BE EJECTED WITHOUT CLOGGING. CUTTERS ARE SHARPENED WITH HAND HELD DIAMOND HONES ROTATED AROUND THE CUTTER END - INSTRUCTIONS INCLUDED. PRO-FORME STARTER KIT INCLUDES STRAIGHT BORING BAR WITH POWERHEAD CUTTER AND A PROMASTER 20" HANDLE. PRO-FORME ADVANCED KIT INCLUDES STRAIGHT, SLIGHT BEND AND HEAVY BEND BORING BARS WITH POWERHEAD CUTTERS AND A PROMASTER 20" HANDLE. 1-1/8" DIAMETER PROMASTER 20" HANDLE HAS A PADDED FOAM GRIP FOR COMFORT AND CONTROL. THE 5/8" DIAMETER END COUPLERS MAKE IT POSSIBLE TO JOIN TWO OR MORE HANDLES TOGETHER FOR AN EVEN LONGER REACH. OPTIONAL PRO-SCRAPER ASSEMBLY INCLUDES TWO HIGH SPEED STEEL SCRAPER CUTTERS. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FLEXI HOLLOWERS - 155-168. IRONS TOOL GATE - 130-805. DIAMOND FLEXI-SHARP HONES - 957-706. 4-WAY DIAMOND HONE - 874-974. DIA-SHARP HONES - 115-403.
|
|
|
|
Layout And Measuring - Electronic Tools
|
CUT COSTS AND ERRORS WITH THE CONSTRUCTION MASTER PRO DESKTOP™ CALCULATOR
|
| Construction Master Pro Dt
|
THE CONSTRUCTION MASTER PRO DESKTOP IS THE MOST COMPLETE CONSTRUCTION-MATH CALCULATOR ON THE MARKET! WITH MANY POWERFUL NEW BUILT-IN SOLUTIONS AND EXPANDED PREFERENCE SELECTION; ITS EASY TO USE FOR FAST, ACCURATE SOLUTIONS TO CONSTRUCTION PROBLEMS. PERFECT FOR COMPLETING LAYOUTS, BIDS AND ESTIMATES SAVES TIME, MONEY, MATERIALS AND FRUSTRATION. NO OFFICE SHOULD BE WITHOUT IT.
CALCULATIONS::
WORK IN AND CONVERT BETWEEN ANY BUILDING DIMENSION, INCLUDING METRIC TRIGONOMETRIC FUNCTION FIND WEIGHT PER VOLUME BUILT-IN RIGHT-ANGLE SOLUTIONS COMPLETE STAIR LAYOUTS ROOF, RAFTER, AND FRAMING SOLUTIONS ADVANCED CIRCULAR CALCULATIONS: ARCS, CIRCUMFERENCE, SEGMENTS AND MORE
NEW FEATURES, FUNCTIONS AND ENHANCED SOLUTIONS::
DRYWALL, SIDING, PANELS FIND NUMBER OF SHEETS FOR AN AREA STAIRS SET RISER HEIGHT AND SOLVE FOR STAIRWELL OPENING STUDS FIND NUMBER ON-CENTER FOR AN ENTERED LENGTH COMPOUND MITER CUTS ARCHED RAKE-WALLS EQUAL SIDED POLYGONS
|
|
|
|
Layout And Measuring - Electronic Tools
|
MEASURE MASTER CLASSIC™ MAKES COMPLEX CALCULATIONS FRQUENTLY USED BY WOODWORKERS
|
| Measure Master Pro
|
GET PROFESSIONAL RESULTS EVERY TIME WITH THIS HANDY AND EASY-TO-USE TOOL FOR PROJECTS INVOLVING MEASUREMENTS! WORK IN AND CONVERT BETWEEN DIMENSIONAL FORMATS INCLUDING FEET-INCH-FRACTIONS, DECIMAL FEET-INCH-FRACTIONS, YARDS, METERS, CENTIMETERS AND MILLIMETERS AS WELL AS AREAS AND VOLUMES.
BUILT-IN FUNCTIONS MAKE THE MEASURE MASTER PRO IDEAL FOR FASTER, MORE ACCURATE MATERIAL ESTIMATES. QUICKLY SOLVE CIRCUMFERENCE, CIRCLE AREA, AND ARCS. THIS SIMPLE AND POWERFUL CALCULATOR FITS IN A POCKET, BRIEFCASE OR TOOL POUCH. USE IT AT HOME OR IN THE SHOP FOR ON-THE-SPOT CALCULATIONS SAVING YOU TIME, MONEY AND FRUSTRATION!
CALCULATIONS::
WORK IN AND CONVERT BETWEEN DIMENSIONS, INCLUDING METRIC. LINEAR, AREA AND VOLUME MEASUREMENTS; SQUARE-UP AND PERIMETER. FIND WEIGHT AND WEIGHT PER VOLUME. INSTANT SOLUTIONS FOR CIRCLE AREA, CIRCUMFERENCE, ARCS AND MORE. BOARD FEET. COST PER UNIT: SOLVE UNIT COST AND PRICING.
|
|
|
Click for More Info
|
Layout And Measuring - Electronic Tools
|
POWERFUL METAL DETECTOR WITH LASER HELPS DETECT PREVENT COSTLY DAMAGE AND PERSONAL INJURY
|
| Lumber Wizard 4
|
THE WIZARD 4™ II IS THE LATEST, PORTABLE, PRECISION METAL DETECTOR WITH A LASER LINE GENERATOR THAT PROVIDES A BRIGHT VISUAL REFERENCE TO THE METAL FRAGMENTS HIDDEN INSIDE NEW OR USED LUMBER:
USE TO LOCATE NAILS OR SCREWS IN RECYCLED WOOD BEFORE SAWING OR PLANING. USE TO FIND STUDS INSIDE A WALL BY DETECTING DRYWALL SCREWS OR NAILS. NO GUESSING - WHEN METAL IS DETECTED, ALARM SOUNDS AND RED LEDS LIGHT UP AND A BRIGHT LASER LINE INDICATES THE POSITION. 6 WIDE SCANNING AREA QUICKLY SCANA ANY SIZE WOOD. ON/OFF SWITCH - FINE TUNING CALIBRATION. APPROXIMATELY 1-1/8"H X 3-1/8"W X 18"L; WEIGHS 10.3 OZ. REQUIRES A 9V BATTERY (NOT INCLUDED). ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Layout And Measuring - Electronic Tools
|
CONSTRUCTION MASTER PRO™ CALCULATOR HANDLES ALL BUILDING DIMENSIONAL FORMATS
|
| Construction Master Pro
|
THE CONSTRUCTION MASTER PRO SETS THE INDUSTRY STANDARD FOR ADVANCED CONSTRUCTION-MATH CALCULATORS. IT PROVIDES POWERFUL BUILT-IN SOLUTIONS AND EXPANDED PREFERENCE SETTINGS. ITS EASY TO USE IN THE FIELD OR OFFICE AND PERFECT FOR COMPLETING PLANS, LAYOUTS, BIDS AND ESTIMATES SAVES TIME, MONEY, MATERIALS AND FRUSTRATION. WORK SMARTER, BUILD BETTER AND IMPROVE YOUR BOTTOM LINE WITH THE CONSTRUCTION MASTER PRO!
CALCULATIONS::
WORK IN AND CONVERT BETWEEN BUILDING DIMENSIONS, INCLUDING METRIC. BUILT-IN RIGHT-ANGLE SOLUTIONS. AREAS, VOLUMES, SQUARE-UPS. COMPLETE STAIR LAYOUTS. ROOF, RAFTER AND FRAMING SOLUTIONS. CIRCLE: ARCS, CIRCUMFERENCE, SEGMENTS.
NEW FEATURES, FUNCTIONS AND ENHANCED SOLUTIONS::
DRYWALL SIDING AND PANELS. STAIRS RISER HEIGHT AND SOLVE FOR STAIRWELL OPENING. STUDS ON-CENTER. COMPOUND MITER CUTS. ARCHED RAKE WALLS. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Jigs And Fixtures
|
ANGLE°PERFECT III™ AND BLADEGAUGE III™ COMBO KIT
|
| Combo Kit Angle Per & Blade Gauge
|
THE KIT-1 ANGLE°PERFECT III™ & BLADEGAUGE III™ COMBO KIT WITH ZERO CLIP™ CAN HELP YOU SET UP ALMOST ANY POWER TOOL IN YOUR SHOP TO 1/100S-OF-1" ACCURACY:
ANGLE°PERFECT III™ USES AN LED TO LET YOU SET UP THE SIX CRITICAL ELEMENTS OF TABLESAW ALIGNMENT. 2-1/8H X 2W X 7-1/2"L; WEIGHS 12.8 OZ. USING THE BLADEGAUGE III™, YOU CAN DETERMINE TABLESAW BLADE AND ROUTER BIT HEIGHT FROM 1/32" TO 2", IN 1/32" INCREMENTS, BY ALSO USING THE BUILT-IN LED. 2-1/8H X 2W X 10"L; 12.8 OZ. MAGNETIC BASES ALLOW HANDS-FREE OPERATION - MAGAWIRE™ PROVIDES AN ELECTRICAL PATH FOR BLADEGAUGE III™ ON NON-CONDUCTIVE TABLE TOPS. FEATURING ZERO CLIP™, EITHER CAN BE USED TO ENSURE THAT JOINTER BLADES ARE INSTALLED PERFECTLY LEVEL. KIT COMES WITH FEELER GAUGE, EXTRA 3V BATTERY, BRASS SHIMS, EXTRA CLIPS, HEX WRENCH, CHOICE OF DEMONSTRATION DVD OR VHS TAPE, 2-3/4"H X 5"D X 11-3/4" WOOD STORAGE CASE AND COMPLETE INSTRUCTIONS. 2 LBS., 12 OZ. SHIPPING WEIGHT. ONE-YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA POWERGRIP JAWS
|
| Long Nose Jaws
...plus other(s)
|
THE NOVA POWERGRIP JAWS HAVE 1-1/8" DEEP JAWS WITH INTERNAL SERRATIONS FOR EXCEPTIONAL HOLDING POWER. THE MULTI-PURPOSE JAWS HAVE AN EXTERNAL DOVETAIL ON THE OUTSIDE RIM DOUBLING AS 4" JAW SET:
PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA POWERGRIP JAWS
|
| Powergrip Jaws
|
THE NOVA POWERGRIP JAWS HAVE 1-1/8" DEEP JAWS WITH INTERNAL SERRATIONS FOR EXCEPTIONAL HOLDING POWER. THE MULTI-PURPOSE JAWS HAVE AN EXTERNAL DOVETAIL ON THE OUTSIDE RIM DOUBLING AS 4" JAW SET:
PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Mobile Bases
|
EASY MACHINE MOVEMENT, GUARANTEED - HTC MOBILE BASES WORK BETTER THAN ANY CASTER SYSTEM
|
| Mb, Delta Contractor Saw Crow Feet
...plus other(s)
|
MAKE YOUR POWER TOOLS EASY TO MOVE OR STORE. WHEN YOU WANT ONE, SIMPLY ROLL IT ON ITS HTC MOBILE BASE TO WHERE YOU NEED IT - WHEN YOU'RE DONE, ROLL IT BACK:
THREE POINT LEVELING SYSTEM PROVIDES A SOLID, STABLE STANCE THAT REQUIRES NO TILTING OR ADJUSTING - SEAMLESS WELDING WITH ALL STEEL TUBULAR CONSTRUCTION FOR EXTRA STRENGTH. TWO RIGID WHEELS WITH LOCKING MECHANISMS AND ONE LOCKING SWIVEL WHEEL RAISE MACHINES 3/4" ABOVE FLOOR, ELIMINATING THE NEED TO RECALIBRATE MACHINE SETTINGS THAT CAN BE THROWN OFF BY RAISING AND LOWERING THE MACHINE
HRC-10 - (FITS INSIDE LEGS) DELTA® OLDER 50-315 CONTRACTOR'S SAW® WITH 25" STANDARD FENCE. HRD-10 - DELTA® 34-444, 36-440 AND 36-444 10" CONTRACTOR'S SAW® AND BENCH SAWS. HRLB-6 - DELTA® OLDER MODEL 14" BANDSAW, 6" BELT AND/OR 12" DISC SANDER AND OLDER MODEL 6" JOINTER WITH ENCLOSED TAPERED STANDS; ENCO® 199-9001, -9005, -9011 14" BANDSAWS. HRS-10 - DELTA® UNISAW® WITH 25" FENCE; JET JTAS-10 10" TABLESAW WITH STANDARD FENCE; GRIZZLY® G-1023, G-1023Z TABLESAWS; STAR TOOLS/ENLON IMPORT S3202, EN3202 TABLESAWS; JET OVS-10 SPINDLE SANDER; BRIDGEWOOD® YC-15P PLANER; DELTA® 43-370 THROUGH -386, TWO SPEED SHAPERS. HRBS-14 - DELTA® OLDER MODEL 50-312 FLARED LEG 14" BANDSAW. HRO-14 - DELTA® 28-275 AND 50-313 14" FOUR LEG BANDSAWS; DELTA® 43-355 SHAPER. HRSS-18 - DELTA® 40-560, -601, -640 16", 18", 20" SCROLL SAWS; LOBO MACHINERY CORP. JT-8 8" JOINTER. HRL-12 - DELTA® 12" STANDARD DUTY LATHE. HRJ-15 - DELTA® DJ-15 6" JOINTER; JET OLDER MODEL JBS-14 OS 14" BANDSAW; STAR TOOLS/ENLON IMPORT ENBS14N 14" BANDSAW; BRIDGEWOOD® YC-8J 8" JOINTER. HRD-10-X - DELTA® 34-445 & 36-490, -455 10" CONTRACTOR'S SAW® AND BENCH SAWS WITH 30" FENCE. HRS-8-X - DELTA® 36-751 10" CABINET SAW WITH 30" FENCE. HRS-8-G - DELTA® 36-752 10" CABINET SAW WITH 52" FENCE. HSJ-1413 - JET JWBS-14C 14" CLOSED STAND BANDSAW. HJTS-761 - JET 10" CONTRACTOR SAW; STAR TOOLS/ENLON IMPORT S3501 14.5" BANDSAW. HSK-593 - DELTA® 17-900 DRILL PRESS; GENERAL INTERNATIONAL 75-100 & 75-200 17" DRILL PRESSES; JET JDP-17MF 16-1/2" DRILL PRESS. HPB-30-S - JET JWBS-18 18" BANDSAW; POWERMATIC OLDER 30-B & 33-B BELT AND DISC SANDERS WITHOUT DUST COLLECTORS. HRS-2158 - DELTA® 40-650 18" THREE LEG SCROLL SAW; DEWALT® 20" DW-788 THREE LEG SCROLL SAW. HSB-2665 - DELTA® 31-250 18" X 36" DRUM SANDER. HDS-210 - DELTA® 31-280 6" BELT/12" DISC SANDER. HRS-10-G - DELTA® UNISAW® WITH 50" EXTENSION FENCE; JET JTAS-10 TABLESAW WITH 52" FENCE; GRIZZLY® G-1023 TABLESAW WITH 50" EXTENSION FENCE. HRLB-8 - DELTA® 8" LONG BED JOINTER (OLD STYLE). HRJ-8 - DELTA® 37-350 8" JOINTER. HRL-16 - DELTA® DL-40 ELECTRONIC LATHE. HRL-700 - DELTA® 46-705 LATHE; JET JWL-1236 LATHE. HRS-8 - DELTA® 36-755 10" CABINET SAW WITH 25" FENCE; BRIDGEWOOD® BW-310SL SHAPER. HRLS-5 - DELTA® 28-280 14" BANDSAW. LIFETIME MANUFACTURER'S WARRANTY. USA. LOCATE MOBILE BASES FOR WOODTEK® PRODUCTS BY ENTERING THE MACHINE'S SIX DIGIT PRODUCT NUMBER INTO THE WOODWORKER.COM WIZARD QUERY® SEARCH BOX.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
QUICK-SET SHIELD™ WORKS WHERE OTHERS CAN'T REACH
|
| 6"x8" Quick Set Shield
...plus other(s)
|
AVAILABLE IN TWO SIZES, THE QUICK-SET SHIELD™ PROVIDES PROTECTION FROM FLYING CHIPS WHEN USING BANDSAWS, DRILL PRESSES, ROUTER TABLES OR OTHER POWER TOOLS:
FULL, 1/8" THICK POLYCARBONATE SHIELD ATTACHES TO A FLEXIBLE 14"L X 3/4" DIA. LOC-LINE® ARM AND SWIVELS A FULL 360°. SHIELDS COME WITH MAGNETIC AND DIRECT MOUNTS. USA.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
FINE TUNE YOUR TOOLS TO 0.001" ACCURACY WITH THE RED-LINE X POINT POWER TOOL SETUP GAUGE
|
| X-point Power Tool Setup Gauge
|
NOW YOU CAN ALIGN ALL OF THE COMPONENTS OF STATIONARY POWER TOOLS SO THEY CUT SMOOTHLY, QUIETLY AND WITH PERFECT ACCURACY. WITH THE RED-LINE X POINT POWER TOOL SETUP GAUGE YOU CAN TEST THE FLATNESS OF TABLESAW BLADES, CHECK TABLESAW ARBOR RUNOUT, ALIGN BLADE AND RIP FENCES WITH MITER SLOTS, SET MITER GAUGE ANGLES, MEASURE DRILL PRESS SPINDLE RUNOUT, SQUARE DRILL PRESS TABLE TO SPINDLE, SET JOINTER KNIVES AND CHECK BANDSAW TABLES FOR SQUARENESS TO THE BLADE:
THREE POINT BEARING GUIDES ENSURE A "SLOP FREE" FIT IN MITER GAUGE SLOTS; TWO POWERFUL RARE EARTH MAGNETS HOLD THE BASE TIGHT TO TOOL SURFACE, WHILE BASE LEVELING SCREWS ENSURE SQUARENESS TO TOOL SURFACES. SOLID ALUMINUM WITH PRECISION, EASY TO READ ANALOG DIAL INDICATOR. COMPLETE INSTRUCTIONS AND MOLDED PROTECTIVE CASE INCLUDED.
|
|
|
|
Machinery Accessories - Stands
|
DELTA® UNIVERSAL STAND
|
| Universal Stand
|
USING THE DELTA® 50-330 UNIVERSAL STAND YOU CAN CONVERT A BENCH TOP DRILL PRESS OR SIMILAR POWER TOOL INTO A FLOOR MODEL:
HEAVY GAUGE STEEL RAILS AND LEGS - BOLT TOGETHER ASSEMBLY. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Components - Controls
|
POWER-LOC™ AUXILIARY SAFETY POWER SWITCH MOUNTS ALMOST ANYWHERE
|
| Power-loc Auxiliary Switch
|
FROM BENCH DOG TOOLS®, THE POWER-LOC™ MODEL PWR400 AUXILIARY SAFETY POWER SWITCH IS A REMOTE CONTROL THAT CAN BE MOUNTED IN ALMOST ANY LOCATION - FITS YOUR ROUTER TABLE, FENCE, CABINET AND MANY OTHER LOCATIONS:
SIMPLY PLUG YOUR TOOL INTO THE SWITCH AND THE SWITCH INTO WALL OUTLET. TOUGH AND DURABLE, LIGHTED ON/OFF SWITCH FEATURES A SAFETY LOCK TO PREVENT ACCIDENTAL ACTUATION. 120VAC, 15A, UL-LISTED, NON-MAGNETIC SWITCH INCLUDES 8' LONG, GROUNDED POWER CORD (MOUNTING BRACKET AND HARDWARE INCLUDED). TWO-YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Components - Controls
|
PUSH BUTTON SWITCH 120/230V 30/15A
|
| Push Button Switch 120/230v 30/15a
...plus other(s)
|
REPLACE OR UPGRADE SWITCHES ON YOUR POWER TOOLS OR MACHINERY WITH THESE REPLACEMENT QUALITY MECHANICAL ELECTRIC SWITCHES:
PUSH BUTTON SWITCH - 115/230V, 30A, 60HZ. DESIGNED FOR LARGER MACHINES; MEASURES 4-1/2" X 2-1/2" X 2-1/4". BAT HANDLE TOGGLE SWITCH - 125VAC, 15A, OR 250VAC, 10A; 60HZ. WORKS BEST WITH SMALLER ELECTRIC MOTORS, POWER TOOLS, LIGHT FIXTURES AND INSTRUMENTS. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
will
