|
|
|
Hardware Drawer Slides - Accessories
|
BLUM UNIVERSAL INDIVIDUAL TEMPLATE MAKES CABINET HARDWARE SETUP SIMPLE AND ACCURATE
|
| Universal Individual Template
|
THE UNIVERSAL INDIVIDUAL TEMPLATE™ ALLOWS YOU TO USE YOUR CORDED OR CORDLESS DRILL TO ACCURATELY MARK AND BORE MOUNTING HOLES FOR A WIDE VARIETY OF FONT COLOR=#FF9900>BLUM® CABINET HARDWARE.
EASILY ADJUSTS AND LOCKS TO GIVE PROPER SETBACK FOR AVENTOS™ LOCATING PINS, TANDEM™ AND TANDEMBOX™ RUNNERS, HINGE MOUNTING PLATES AND BLUMOTION™ AND TIP-ON™ ADAPTER PLATES. SET INCLUDES UNIVERSAL INDIVIDUAL TEMPLATE, 2.5MM AND 5MM STOP COLLARS FOR TWIST BITS (BITS NOT INCLUDED). AUSTRIA
|
|
|
|
Hardware Hinges - Butt
|
BRUSSO® BUTT HINGES FOR SMALL BOXES
|
| 3/4"l Spans 5/16" Stop Hinge
...plus other(s)
|
BRUSSO® BUTT HINGES ARE MILLED FROM SOLID BRASS AND FEATURE A FLAWLESS SATIN FINISH:
811-418 JB-101 FULL MORTISE BUTT HINGES - (3/4" LONG X 3/32" LEAF THICKNESS, SPANS 5/16" MATERIAL) HAVE BUILT-IN STOPS TO ALLOW LID TO REMAIN OPEN AT 95°. 811-425 JB-103 FULL MORTISE BUTT HINGES - (1-1/4" LONG X 3/32" LEAF THICKNESS, SPAN 7/16" MATERIAL); OPERATION SIMILAR TO JB-101. 811-419 JB-102 FULL MORTISE BUTT HINGES - (1-1/4" LONG X 3/32" LEAF THICKNESS, SPANS 5/16" MATERIAL); OPERATION SIMILAR TO JB-101. 105-830 JB-804 STOP HINGES - (1-1/4" X 1-1/32, 3/16" LEAF THICKNESS, 1/8" RADIUS CORNER) PROVIDE BUILT-IN STOPS, ALLOWING LID TO REMAIN OPEN AT ABOUT 95° - USE WHEN ADDITIONAL STAYS NOT DESIRED. MORTISE FLAT INTO BOX AND LID. HINGE PINS ARE TOOL STEEL, FITTED TO PRECISION-REAMED BORES. SOLD IN PAIRS (MOUNTING SCREWS INCLUDED)..
OPTIONAL HINGE ROUTING JIGS, MILLED FROM SOLID BRASS, ENSURE QUICK AND PRECISE PLACEMENT OF BRUSSO® HINGES:
TJ-101 JIG - JB-101 HINGES. TJ-102 JIG - JB-102 HINGES. TJ-103 JIG - JB-103 HINGES. COMPLETE INSTRUCTIONS INCLUDED. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE ROUTER BIT (NOT INCLUDED). USA.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE® SINGLE PIVOT HINGE ALLOWS FULL 270° OPENING ON OVERLAY DOORS
|
| 270d Full O/l Single Pvt Hinge-screw-on
...plus other(s)
|
IDEAL FOR MOST CRITICAL APPLICATIONS, WHERE STABILITY AND ENDURANCE ARE REQUIRED. THESE HINGES ARE CERTIFIED FOR APPLICATIONS IN PUBLIC ENVIRONMENTS IN COMPLIANCE WITH FIR LEVEL 5 AND ANSI GRADE 1 REQUIREMENTS:
BRIGHT NICKEL DIE CAST CUP AND ARM WITH SINGLE PIVOT DESIGN. FITS STANDARD 35MM BORING PATTERN WITH 45MM FASTENER SPREAD; CUP BORING DEPTH IS 12MM MINIMUM. SPRING ACTION SELF CLOSING. COMPENSATING SIDE ADJUSTMENT FROM -3MM TO +3MM. HEIGHT ADJUSTMENT ±2MM SNAP ON MOUNTING OF HINGE ARM TO DOMI™ SERIES 200 MOUNTING PLATES. DEPTH ADJUSTMENT OFROM-.5MM TO +2.8MM. ANTI-SLIDING SAFETY STOP. CAN BE MOUNTED WITH THE HINGE KNUCKLE RECESSED INTO THE DOOR EDGE OR LEFT EXPOSED BEYOND THE EDGE OF THE DOOR, FOR RECESSED KNUCKLE APPLICATIONS CUP BORING CENTER DISTANCE IS 18.5MM FROM THE DOOR EDGE AND A RELIEF OF 8MM X 43MM MUST BE MILLED INTO THE DOOR EDGE TO ACCOMMODATE THE HINGE MECHANISM. FOR EXPOSED KNUCKLE APPLICATIONS, HINGE CUP BORING CENTER DISTANCE IS 10.5MM FROM THE DOOR EDGE, ALLOWING AN OPENING FOR THE HINGE MECHANISM. MAY BE USED ON INSET, HALF OVERLAY OR FULL OVERLAY DOORS ON FRAMELESS (PANEL) CABINETS. PLATE HEIGHT REQUIREMENTS RANGE FROM 0MM TO 18MM DEPENDING ON APPLICATION. AVAILABLE IN SCREW-ON OR PRESS-IN (8MM DOWEL) STYLES ALL SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FH NICKEL PLATED WOOD SCREWS PURCHASE SEPARATELY FOR COMPLETE APPLICATION INFORMATION, REFER TO THE .PDF BROCHURE BELOW. MANUFACTURER'S LIMITED LIFETIME WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Specialty
|
BRUSSO® QUADRANT HINGES INCLUDE POSITIVE STOPS
|
| 1" Quadrant Hinge
...plus other(s)
|
BRUSSO® QUADRANT HINGES WITH SUPPORTS ARE PRECISION MILLED FROM SOLID BRASS AND HAVE A HIGH SATIN FINISH:
HD-638 - (1" BARREL WITH 1" X 1" LEAF) COMES WITH A BUILT-IN STOP, ALLOWING LID TO REMAIN OPEN AT 95° - ARC IS MORTISED INTO SIDE OF BOX BENEATH LEAF. HD-680 - (1-1/2" BARREL WITH 1-1/2" X 1-3/4" LEAF); OPERATION SIMILAR TO HD-638. SOLD IN PAIRS (MOUNTING SCREWS INCLUDED). USA.
|
|
|
|
Hardware Hinges - Specialty
|
TRUNK PARTS - FLUSH MOUNT LOCK
|
| Chest Hinge W/stop 1-1/2"x2-1/2"
...plus other(s)
|
THIS SELECTION OF TRUNK HARDWARE INCLUDES ALMOST ALL OF THE DECORATIVE AND FUNCTIONAL ELEMENTS YOU MIGHT NEED TO BUILD OR REFURBISH A FLAT- OR DOME-TOP TRUNK:
PLATED-STEEL HARDWARE - GENUINE LEATHER HANDLES. SOLD INDIVIDUALLY (MOUNTING SCREWS OR BRADS NOT INCLUDED UNLESS OTHERWISE INDICATED). 943-222 - FLUSH-MOUNT TRUNK LOCK (BRASS FINISH), 3-3/4" X 4-3/4" - USE SEVEN, #6 ROUND HEAD SCREWS. 943-231 - DRAW BOLT (BRASS FINISH), 1-3/4" X 3-1/4" - USE FIVE, #5 FLAT HEAD SCREWS. 943-236 - TRUNK CORNER (BRASS FINISH), 1-1/2" WIDE W/2" LEGS - USE FOUR, #6 ROUND HEAD SCREWS. 943-243 - LID STAY (BRASS FINISH), 7/8" X 6-3/4", OPEN - USE TWO, #6 FLAT HEAD SCREWS. 943-250 - TRUNK CORNER (BRASS FINISH), 1-1/4" X 1-1/4" X 1-1/4" - USE THREE, #6 ROUND HEAD SCREWS. 943-257 - TRUNK CORNER (BRASS FINISH), 1" X 1" X 1" - USE THREE, #6 ROUND HEAD SCREWS. 943-264 - HANDLE LOOP (BRASS FINISH), 2-1/4" X 2-1/16" - USE FOUR, #6 ROUND HEAD SCREWS. 943-271 - HANDLE LOOP (NICKEL FINISH), 2-1/4" X 2" - USE THREE, 18GA BRADS. 943-278 - BLACK LEATHER HANDLE (1-1/8" X 8-5/8" X 1/4"). 943-285 - BLACK LEATHER HANDLE (1" X 9-1/4" X 1/4"). 943-287 - NATURAL LEATHER HANDLE (1-1/8" X 8-5/8" X 1/4"). 155-498 - 90°-STOP TRUNK HINGE (BRASS FINISH), 2-1/2" X 1-1/2" - SOLD IN PAIRS, SCREWS INCLUDED.
|
|
|
|
Hardware Storage - Cabinet Storage
|
TURN UNUSED UNDERSINK SPACE INTO CONVENIENT STORAGE
|
| 11" Sink Tray-almond
...plus other(s)
|
DESIGNED FOR USE WITH SCISSORS OR EURO-TRAY HINGES (SOLD SEPARATELY), KNAPE & VOGT® PLASTIC SINK FRONT TRAYS ARE LEAKPROOF AND WORK WITH FACE FRAME OR FRAMELESS CABINETRY - AVAILABLE IN WHITE OR ALMOND:
TRAYS INSTALL USING CONVENIENT KEYHOLE SLOTS AND CAN BE REMOVED EASILY FOR CLEANING (MOUNTING SCREWS NOT INCLUDED). NO STOP NEEDED FOR THIS STYLE INSTALLATION. SHALLOW TRAYS INTENDED FOR SOLID SURFACE COUNTERTOPS WITH LARGE, DEEP SINKS. "RS" MODELS INCLUDE RING STORAGE LUG. SCISSORS HINGES: 40° OPENING ANGLE, SPRING-LOADED, SELF-CLOSING WITH INTERNAL STOP. 3-3/4"H X 3/4"W X 1-3/4"D - ZINC-PLATED STEEL. EURO-TRAY HINGES: 45°-90° OPENING ANGLE. 2-3/4"H X 4"W X 2"D - NICKEL-PLATED STEEL. MOUNTING HARDWARE AND INSTALLATION INSTRUCTIONS INCLUDED. SOLD IN PAIRS.
|
|
|
|
Hardware Storage - Cabinet Storage
|
KV® HALF MOON SHELF HARDWARE
|
| Half Moon Glideout Hardware-wh
...plus other(s)
|
DESIGNED FOR CONVENIENCE AND AVAILABLE WITH A WHITE OR ALMOND FINISH, KV® HALF MOON HARDWARE MAKES IT POSSIBLE TO TAKE FULL ADVANTAGE OF YOUR WOOD SHELVING:
5-1/2"H X 23"W HALF MOON GLIDE-OUT HARDWARE NOT ONLY PIVOTS THE SHELF OUT OF THE CABINET, BUT IT ALSO BRINGS IT OUT AN ADDITIONAL 13" ON HEAVY DUTY BALL BEARING SLIDES (INCLUDES STOP TO PREVENT SHELF FROM HITTING BACK OF CABINET). WEIGHS 7 LBS. 5-1/2"H X 23"W HALF MOON HARDWARE CONTAINS HINGE AND BRACE ASSEMBLY THAT MATE TOGETHER TO FORM A PIVOTING, TWO-ARM SUPPORT SYSTEM. WEIGHS 2 LBS. EACH HARDWARE PACKAGE CONTAINS MATERIALS FOR ONE SHELF. NOTE: ALMOND FINISH HARDWARE IS LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Machinery Accessories - Stands
|
BOSCH PORTABLE MITER SAW STANDS PROVIDE UP TO 18' OF MATERIAL SUPPORT
|
| T4b Gravity Rise Miter Saw Stand
...plus other(s)
|
BOSCH MITER SAW STANDS NOT ONLY OFFER EXCEPTIONAL CAPACITY BUT THEIR VERSATILE TOOL MOUNTS WILL ACCOMMODATE ALMOST ANY BRAND OF MITER SAW (MITER SAW NOT INCLUDED):
T4B GRAVITY RISE MITER SAW STAND:
QUICK RELEASE CLAMP MOUNTING SYSTEM. RAPID SETUP AND BREAKDOWN - 400 LBS. CAPACITY. 8" PNEUMATIC WHEELS AND ADJUSTABLE LEVELING FEET. POWER COATED 1-1/2" TUBULAR STEEL FRAME. 80 LBS. NET WEIGHT; 90 SHIPPING WEIGHT.
T3B TRACRAC® MITER SAW STAND:
CAM LOCK CLAMP MOUNTING SYSTEM. FOLDING/TELESCOPING LEGS - 500 LBS. CAPACITY. 4" HARD RUBBER WHEELS. 44 LBS. NET WEIGHT; 53 SHIPPING WEIGHT.
T1B FOLDING LEG MITER SAW STAND:
QUICK RELEASE CLAMP MOUNTING SYSTEM. FOLDING LEGS WITH PUSH BUTTON RELEASE HINGES. TELESCOPING STOCK SUPPORT EXTENSIONS W/STOCK STOPS. POWER COATED TUBULAR STEEL FRAME. 47 LBS. NET WEIGHT; 48 SHIPPING WEIGHT.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
EASILY AND ACCURATELY INSTALL DOOR HINGES USING YOUR ROUTER AND THE PORTER-CABLE® HINGE BUTT TEMPLATE KIT
|
| Hinge Butt Template Kit
...plus other(s)
|
THE PORTER-CABLE® MODEL 59381 HINGE BUTT TEMPLATE KIT IS EASY TO USE AND PERMITS MORTISING DOORS AND JAMBS FROM 78" TO 84" LONG AND ENSURES PERFECTS MATCHING OF HINGE LOCATIONS:
FEATURES INCLUDE SPRING LOADED NAILS, THAT STAY UP PRIOR TO DRIVING, AND CAN BE REMOVED WITH CLAW HAMMER; THICKNESS PINS TO MOUNT DOORS TO JAMB WITHOUT JAMB STOPS; END GAUGES FOR EACH END OF THE TEMPLATE; AND A FULL LENGTH LOCATOR WITH EACH TEMPLATE SECTION. INCLUDES TEMPLATES FOR 6'6", 6'8" AND 7'0" JAMBS AND DOORS; A HINGE TEMPLATE CAN BE ADJUSTED FOR CUTTING 3" TO 6" MORTISES FOR COMMON HINGE SIZES. ALSO INCLUDES 1/2" DIA. MORTISING BIT, TEMPLATE GUIDE, LOCK NUT, CARRYING CASE AND INSTRUCTION MANUAL. 878-955 - MODEL 517 LOCK FACE TEMPLATE IS USED TO QUICKLY ROUT LOCK FACES INTO DOORS AFTER THE BOX LOCK MORTISE HAS BEEN COMPLETED; AUTOMATICALLY SELF CENTERING AND SELF BEVELING.
|
|
|
|
Advanced Search Tools
Browse
will