NARROW RESULTS Results are sorted by product category.
(Clicking on the  will
narrow the results by subcategory)
|
|---|
Chemicals (13)
Polishes (13)
|
|
|
Chemicals - Polishes
|
HUT ULTRA GLOSS
|
| Ultra Gloss
|
HUT ULTRA GLOSS POLISHES PLASTIC MATERIALS RANGING FROM THE SOFT BUTERATES TO HARDER MATERIALS SUCH AS ACRYLIC ACETATE, ACRYLIGEM, POLY-GEM, ACRYLIC ROD, CRUSHED VELVET, CELLULOSE ACETATE AND CORIAN®. SAND TURNINGS TO 800 GRIT OR HIGHER. APPLY POLISH WITH THE LATHE ON SLOW FOR EVEN DISTRIBUTION AND THEN POLISH ON HIGH SPEED WITH MODERATE PRESSURE TO PRODUCES A WARM FRICTION POLISH WITH A GLASS LIKE FINISH IN SECONDS:
COMES IN A 8 OZ. BOTTLE. USA
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HUT CRYSTAL COAT WOOD POLISH - 103-679.
|
|
|
|
Chemicals - Polishes
|
J.E. MOSER'S BUTCHER BLOCK OIL WOOD FINISH
|
| Orange Oil
...plus other(s)
|
J.E. MOSER'S® BUTCHER BLOCK OIL IS ODORLESS AND NON-TOXIC SO IT SAFELY HELPS PROTECT WOOD SURFACES THAT COME IN CONTACT WITH FOOD:
SIMPLY WIPE ON UNFINISHED WOOD, ALLOW 5 MINUTES TO PENETRATE AND WIPE OFF THE EXCESS. USE REGULARLY ON CUTTING BOARDS, UTENSILS, BOWLS, BUTCHER BLOCKS, ETC. J.E. MOSER'S® ORANGE OIL IS MADE USING OIL SQUEEZED FROM ORANGE RINDS SO IT WILL CLEAN AND FRESHEN THE FINISH WITHOUT USING ANY HARSH SOLVENTS(NOT FOR USE ON FOOD RELATED ITEMS):
PLEASANT CITRUS ODOR. WIPE ON WITH A LINT FREE CLOTH. 16 OZ. PLASTIC BOTTLES. USA.
|
|
|
|
Chemicals - Polishes
|
3M™ SUPER DUTY RUBBING COMPOUND SUPER FOR SOLID SURFACES
|
| Super Duty Compound
...plus other(s)
|
3M™ SUPER DUTY RUBBING COMPOUND IS AGGRESSIVE AND REMAINS WET ON THE JOB WITH LITTLE OR NO MESS:
MAINTAINS HIGH CUT RATE WITH CONSTANT PRESSURE AND BUFFS TO A HIGH GLOSS WITH A MINIMUM OF SWIRL MARKS. CAN BE USED BY HAND OR MACHINE. AVAILABLE IN QUART OR GALLON SIZES. USA. NOTE: GROUND SHIPMENT ONLY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
123-821 - J.E. MOSER'S™ SHOP RAGS CLICK HERE. 125-405 - BUFFING PADS CLICK HERE.
|
|
|
|
Chemicals - Polishes
|
FINE SPRAY WAX FORMULATED FOR LACQUER, VARNISH OR FRENCH POLISH FURNITURE FINISHES
|
| Fine Spray Wax-400ml
|
LIBERON FINE SPRAY WAX CREATES AN EXTRA BARRIER AGAINST DAMAGE FROM WATER, HEAT AND ALCOHOL WHILE PRODUCING A SOFT SHEEN AND LEAVING A SILKY FEEL:
CAN ALSO BE USED AS A FINISH ON UNFINISHED OAK OR PINE FOR A COUNTRY-STYLE APPEARANCE. 13.5 OZ. (400ML) AEROSOL CAN. ENGLAND.
|
|
|
|
Chemicals - Polishes
|
FINISH YOUR GUITAR WITHOUT A SPRAY GUN
|
| Buffer's Polish #5
...plus other(s)
|
H. BEHLEN® GUITAR FINISHING KIT IS DESIGNED SO EXPERIENCED AND FIRST TIME LUTHIERS ALIKE CAN CREATE A PROFESSIONAL FINISH WITH THIS KIT! YOU CAN APPLY A CLEAR FINISH OR A FINISH WITH A SUNBURST EFFECT. THE KIT COMES WITH 2 DVD'S THAT GIVE DETAILED STEP-BY-STEP PROCEDURES FOR GUITAR FINISHING AND REPAIRS. NO SPRAY EQUIPMENT IS REQUIRED BECAUSE THE FINISHES COME IN AEROSOL CANS. THE KIT IS IDEAL FOR BOTH ACOUSTIC AND SOLID BODIED GUITARS INCLUDING:
TOPCOAT, SEALER, AND TONERS. RUBBING PRODUCTS. FINGERBOARD OIL. USA. NOTE: REGULATIONS RESTRICT DELIVERIES OF CERTAIN ITEMS (SEE BELOW).
|
|
|
|
Chemicals - Polishes
|
FURNITURE POLISH AND CLEANER ALL IN ONE FORMULA
|
| Furniture Polish & Cleaner
|
RESTORES THE FINISH ON OLD WOOD TO MAKE IT LOOK NEW; IMAGINE WHAT IT WILL DO FOR YOUR NOT-SO-OLD FURNITURE:
HIDES FINE SCRATCHES REMARKABLY WELL AND MANY WATER RINGS WILL SIMPLY DISAPPEAR IN SECONDS. A SPECIAL BLEND OF LEMON AND ORGANIC OILS FEED WOOD TO HELP PREVENT DRYNESS AS WELL AS ADD MOISTURE PROTECTION. CONTAINS NO WAX OR SILICONES, SO THERE'S NO GREASY FINISH. APPLIES EASILY WITH A SOFT CLOTH. 16 OZ. BOTTLE.
|
|
|
|
Chemicals - Polishes
|
H. BEHLEN® RUBBING COMPOUNDS - THE PERFECT FINISHING TOUCHES FOR WOOD
|
| Rubbing Compound
...plus other(s)
|
THREE H. BEHLEN® RUBBING COMPOUNDS WITH WHAT IT TAKES TO PUT A HIGH QUALITY FINISH ON FURNITURE AND OTHER FINE WOOD PROJECTS:
RUBBING COMPOUND - MEDIUM FINE - FOR THE FIRST RUB
849-797 - SEMI-PASTE, EFFECTIVE FOR RUBBING OUT FINAL COATS OF LACQUER, SHELLAC AND VARNISH OR FOR REMOVING MINOR SURFACE IMPERFECTIONS AND OVERSPRAY ON SPOT REPAIRS. USE IN PLACE OF MEDIUM PUMICE STONE FOR A MEDIUM LUSTER FINISH.
FINISH-RUB - POLISHES THE FIRST RUB AND MAKES DULLED FINISHES LUSTROUS
849-804 - A FINER ABRASIVE THAN THE RUBBING COMPOUND. WHEN USED IN SUCCESSION, THE TWO COMPOUNDS PRODUCE A VERY SMOOTH SURFACE WITH A GLOSS SHEEN. ALSO GOOD FOR RESTORING DULL FINISHES ON OLDER FURNITURE AND BUFFING OUT MINOR DEFECTS. APPLY WITH CLOTH, STEEL WOOL OR A NYLON MESH PAD (FOR A SATIN FINISH). IF APPLIED WITH A CLOTH, DAMPEN CLOTH WITH WATER.
DELUXING COMPOUND - WAX AND RUBBING COMPOUND COMBINED
849-818 - A COMBINATION OF WAXES AND BUFFING MATERIALS THAT LET YOU RUB OUT A FINISH AND APPLY WAX AT THE SAME TIME. USE IT AS THE LAST STEP IN CREATING SMOOTH, MIRROR-LIKE FINISHES. NOT AVAILABLE IN CALIFORNIA
|
|
|
|
Chemicals - Polishes
|
J.E. MOSER'S 875973 PUMICE AND ROTTEN STONE
|
| Coarse Pumice Stone
...plus other(s)
|
J.E. MOSER'S® NATURAL ABRASIVE PRODUCTS, USED WITH PARAFFIN OIL OR WATER, ARE EXCELLENT CHOICES FOR RUBBING OUT WOOD FINISHES:
J.E. MOSER'S® ROTTENSTONE POLISHES TO A HIGH GLOSS. COARSE (2F) AND FINE (4F) PUMICE STONE PROVIDE A MEDIUM GLOSS SHEEN. J.E. MOSER'S® PARAFFIN OIL, IN A CONVENIENT 32 OZ. PUMP DISPENSER. OPTIONAL 4" X 2" X 1" FELT BLOCKS ARE IDEAL FOR RUBBING WITH PUMICE AND ROTTENSTONE AND SPEEDS FINISHING. SAVE MONEY WITH A COMPLETE FINISH RUB OUT KIT, INCLUDING ROTTENSTONE, COARSE AND FINE PUMICE, PARAFFIN OIL AND 3 FELT BLOCKS. USA.
|
|
|
|
Chemicals - Polishes
|
REFORMULATED OZ® POLISH PERFORMS AND PROTECTS EVEN BETTER
|
| Oz Polish
...plus other(s)
|
NEW AND IMPROVED OZ® CREAM POLISH NOW FEATURES:
AN ULTRAVIOLET LIGHT ABSORBER THAT HELPS PROTECT WOOD COLOR. EXTENDED EVAPORATION RATE SO LARGER PIECES CAN BE POLISHED WITH GREATER EASE. AN ANTI-STATIC AGENT THAT MEANS LESS DUSTING AND A CLEAN, FRESH LEMON SCENT. SIMPLY APPLY AND WIPE TO CLEAN, POLISH AND PROTECT ALMOST ANY SMOOTH SURFACE. NON-FLAMMABLE, NON-ABRASIVE, GREASELESS AND CONTAINS NO SILICONES. AVAILABLE IN PINTS AND QUARTS. USA.
|
|
|
|
Chemicals - Polishes
|
BURN-IN BALM MAKES BURN-IN REPAIRS EASIER
|
| 4" X 2" X 1" Felt Block
...plus other(s)
|
H. BEHLEN® MASTER™ BURN-IN BALM IS A HEAT RESISTANT PASTE USED TO PREVENT SCORCHING OF THE SURROUNDING FINISH WHILE LEVELING A BURN-IN REPAIR:
ALSO HELPS PREVENT UNWANTED SPREADING OF EXCESS BURN-IN STICK. USE OPTIONAL FELT BLOCK WITH SLIGHTLY DAMPENED EXTRA FINE WET OR DRY SANDPAPER FOR FINAL LEVELING. USA.
|
|
|
|
Chemicals - Polishes
|
J.E. MOSER'S BRASS & COPPER POWER METAL POLISH - 8OZ.
|
| Brass & Copper Power Polish
...plus other(s)
|
CLEAN UP TARNISH AND STAINS, QUICKLY AND EASILY, USING J. E. MOSER'S® METAL POLISH:
910-053 - J. E. MOSER'S® BRASS & COPPER POWER POLISH CLEANS AND SHINES COPPER BOTTOM PANS, BRASS BEDS AND BRASS HARDWARE. 8 OZ. CAN. 910-060 - J. E. MOSER'S® SILVER & PEWTER POWER POLISH MAKES QUICK WORK OF THE FINEST TABLEWARE AND OTHER FINE SILVER PIECES. APPLY WITH A CLOTH AND BUFF OFF TO LEAVE A PROTECTIVE FILM THAT HELPS PREVENT TARNISHING. 8 OZ. CAN. NOTE: GROUND SHIPMENT ONLY.
|
|
|
|
Chemicals - Polishes
|
EFFECTIVE PRODUCTS THAT REVIVE "DEAD" PLASTIC
|
| Novus #1 Polish
...plus other(s)
|
HOW ELSE COULD YOU RESTORE A SCRATCHED AND HAZED FACE SHIELD OR ADD NEW LIFE TO AN OLD PAIR OF SAFETY GLASSES OR GOGGLES?
NOVUS® #1 PLASTIC CLEAN & SHINE CLEANS ALL PLASTICS WITHOUT SCRATCHING AND LEAVES A LUSTROUS SHINE THAT RESISTS FOGGING, REPELS DUST AND ELIMINATES STATIC. PERFECT FOR POLISHING CORIAN™ PENS. IF THE SURFACE IS EXTREMELY DIRTY, APPLY NOVUS #1 LIBERALLY AND WIPE USING LONG, SWEEPING STROKES. DO NOT USE PRESSURE AT THIS TIME SINCE LARGE DIRT PARTICLES CAN SCRATCH THE PLASTIC. REAPPLY USING SHORT, CIRCULAR STROKES WITH A CLEAN PORTION OF THE CLOTH. WHEN SURFACE IS THOROUGHLY CLEAN AND UNIFORMLY COVERED, BUFF TO A SLIPPERY GLAZE WITH A CLEAN PORTION OF THE CLOTH. SURFACES BUFFED TO A HIGH GLAZE ARE MORE RESISTANT TO DUST AND FUTURE SCRATCHING. REAPPLY REGULARLY TO MAINTAIN THE ANTI-STATIC, SMUDGE AND SCRATCH-RESISTANT PROPERTIES.
NOVUS® #2 FINE SCRATCH REMOVER REMOVES FINE SCRATCHES, HAZINESS AND ABRASIONS FROM MOST PLASTICS. REPEATED USE CAN RESTORE FADED AND DISCOLORED PLASTICS. THE DEEPER THE SCRATCHES, THE GREATER PRESSURE REQUIRED TO REMOVE THEM. IF THE SURFACE IS DIRTY, CLEAN WITH #1 BEFORE APPLYING #2. SHAKE WELL; TEST IN AN INCONSPICUOUS AREA; APPLY LIBERALLY. USING A CLEAN, SOFT CLOTH, POLISH WITH A FIRM BACK-AND-FORTH MOTION AT RIGHT ANGLES TO THE SCRATCHES. KEEP THE CLOTH SATURATED WITH POLISH AT ALL TIMES. WHEN THE WORST SCRATCHES HAVE BEEN POLISHED OUT, REAPPLY UNIFORMLY IN A CIRCULAR MOTION TO THE ENTIRE SURFACE USING SHORT, CIRCULAR STROKES AND LIGHT PRESSURE. ALLOW TO DRY TO A LIGHT HAZE. USING A CLEAN PORTION OF THE CLOTH, BUFF THE SURFACE TO A SLIPPERY GLAZE USING FIRM, SHORT STROKES. FOR HEAVIER SCRATCHES, MULTIPLE APPLICATIONS OR AN APPLICATION OF NOVUS® #3 MIGHT BE REQUIRED. FOLLOW WITH #1 FOR BEST RESULTS. (IF THE DAMAGED AREA IS FAIRLY LARGE OR BADLY DAMAGED, A POWER BUFFER CAN BE USED WITH #2 AND #3. USE A CLEAN WOOL OR COTTON BONNET AND OPERATE THE BUFFER AT A LOW SPEED - APPROXIMATELY 1,000 RPM - TO AVOID OVERHEATING THE PLASTIC. EACH POLISH SHOULD BE APPLIED WITH A SEPARATE, CLEAN BONNET.) NOT RECOMMENDED FOR USE ON EYEGLASS LENSES.
NOVUS® #3 HEAVY SCRATCH REMOVER REMOVES HEAVY SCRATCHES AND ABRASIONS FROM MOST ACRYLIC SURFACES. REQUIRES THE USE OF #2 FOR FINAL POLISHING. REMOVE SURFACE DIRT AND DUST WITH #1. SHAKE WELL; TEST IN AN INCONSPICUOUS AREA; APPLY #3 LIBERALLY. USING A CLEAN, SOFT CLOTH, POLISH WITH A FIRM BACK-AND-FORTH MOTION AT RIGHT ANGLES TO THE SCRATCHES. KEEP THE CLOTH SATURATED WITH POLISH AT ALL TIMES. CONTINUE POLISHING UNTIL ONLY FINE SCRATCHES REMAIN. USING CLOTH, REMOVE ALL REMAINING POLISH. USING A CLEAN CLOTH, APPLY #2 IN A CIRCULAR MOTION UNIFORMLY TO ENTIRE SURFACE. POLISH USING LIGHT PRESSURE UNTIL #2 DRIES TO A LIGHT HAZE. USING A CLEAN PORTION OF THE CLOTH, BUFF THE SURFACE CLEAN. FOLLOW WITH #1 FOR BEST RESULTS. NOT RECOMMENDED FOR USE ON EYEGLASS LENSES.
BUY ALL THREE AT ONE TIME AND SAVE!
NOTE: THE TYPE OF POLISHING CLOTH YOU USE MAKES A DIFFERENCE. THE IDEAL CLOTH IS NON-ABRASIVE, ABSORBENT AND LINT-FREE FABRIC (SUCH AS A COTTON DIAPER). TO ELIMINATE ANY CHANCE OF SCRATCHING, USE ONLY DISPOSABLE CLOTHS. AVOID PAPER TOWELS AND POLYESTER OR RAYON WIPES, WHICH CAN SCRATCH UNPROTECTED PLASTIC.
|
|
|
|
Chemicals - Polishes
|
J.E. MOSER'S 959281 COARSE POLISHING COMPOUND #1
|
| Coarse Polishing Compound #1
...plus other(s)
|
ALTHOUGH THEY CAN BE APPLIED BY HAND, FOR BEST RESULTS USE J.E. MOSER'S® POLISHING COMPOUNDS WITH A MACHINE BUFFER AND FOAM PADS:
COARSE POLISHING COMPOUND #1 FOLLOWS 400-600 GRIT SANDING TO CREATE A MATTE SHEEN. YELLOW CUTTING FOAM PAD RECOMMENDED FOR APPLICATION; THREADED BACKING PLATE ATTACHED. USE MEDIUM POLISHING COMPOUND #2 AFTER 600-800 GRIT SANDING OR FOLLOWING COMPOUND #1 TO CREATE A HIGH GLOSS FINISH. WHITE POLISHING FOAM PAD RECOMMENDED FOR APPLICATION; THREADED BACKING PLATE ATTACHED. FINE POLISHING COMPOUND #3, WHEN USED FOLLOWING COMPOUND #2, CREATES A VERY HIGH GLOSS SURFACE. ALSO REMOVES 1,000 GRIT SANDING MARKS ON LACQUER, POLYURETHANE OR POLYESTER COATINGS AND CAN BE USED TO RESTORE GLOSS OR REMOVE OXIDATION FROM FIBERGLASS. WHITE POLISHING FOAM PAD RECOMMENDED. ALL COME IN 1.65 LB. CANS. NOTE: ALWAYS USE A SEPARATE PAD FOR EACH COMPOUND. FOR NEW OR DRY PADS, DAMPEN PAD SURFACE BY MISTING WITH WATER AND CONTINUE PERIODIC MISING DURING USE. WASH, AS NECESSARY, IN WARM WATER AND MILD DETERGENT TO PREVENT COMPOUND FROM DRYING OUT OR BECOMING CAKED ON THE PAD. LIQUID SWIRL REMOVER POLISHING COMPOUND #4 COMPLETELY REMOVES FINE SCRATCHES AND SWIRL MARKS AND IS APPLIED FOLLOWING 1000-1200 GRIT WET/DRY SANDING - 16.96 OZ. CONTAINER. GERMANY. FOR A GLASS SMOOTH FINAL FINISH, USE A HOOK & LOOP (H&L) LAMB'S WOOL BUFFING PAD RUNNING AT 1,200-1,400 RPM. PAD USE REQUIRES THREADED H&L BACKING PLATE, SOLD SEPARATELY.
TO HELP COMLETE YOUR PROJECT, MAY WE SUGGEST:
PORTER-CABLE® MODEL 7424 POLISHER - 958-707.
|
|
|
|
Advanced Search Tools
Browse
