|
|
|
Hardware Shelf And Support - Brackets
|
CREATE A WORK SURFACE THAT SIMPLY FOLDS OUT OF THE WAY FOR STORAGE
|
| 12" Folding Bracket
...plus other(s)
|
STURDY KNAPE & VOGT® FOLDING SHELF BRACKETS SUPPORT UP TO 750 LBS. PER PAIR WHEN PROPERLY INSTALLED:
BRACKETS LOCK AT 90°, 80° AND 70° FOR CONVENIENT VERSATILITY AND 0° FOR OUT-OF-THE-WAY STORAGE. PERFECT FOR LAUNDRY ROOMS, CRAFT AREAS, PLAYROOMS, BEDROOMS AND DRAWING TABLE APPLICATIONS. DURABLE ZINC-COATED STEEL WITH SPRING-LOADED RELEASE LEVER. NOTE: TO ACHIEVE 750 LBS. PER PAIR CAPACITY, MANUFACTURER RECOMMENDS INSTALLING EACH BRACKET WITH THREE #10 X 2" PAN HEAD SCREWS, FASTENED INTO 2 X 4 WOODEN WALL STUDS AT 16" ON CENTER.
|
|
|
|
Hardware Shelf And Support - Brackets
|
SUPER-STRONG STEEL SHELF BRACKETS
|
| Set - White Bracket 11-1/2" X 8-1/4"
...plus other(s)
|
WITH 5MM THICK STEEL AND SWAGED 3/4" STRUTS, KV® SERIES 208 L-BRACKETS ARE AMONG THE STRONGEST AVAILABLE:
FOUR SIZES - WHITE OR BLACK EPOXY COATING. RECOMMENDED FASTENERS ARE 3" OR LONGER X 5/16" LAG SCREWS MOUNTED INTO STUDS (LAG SCREWS INCLUDED). ATTACH SHELF USING #8 OR LARGER, ROUND-HEAD WOOD SCREWS. USA.
|
|
|
|
Hardware Shelf And Support - Brackets
|
HEAVY DUTY WORK STATION BRACKETS PERFECT FOR WORKBENCHES, COMPUTERS AND MUCH MORE
|
| 12x18 Rev Brackets Black
...plus other(s)
|
HIGH QUALITY, CANTILEVER WORK STATION BRACKETS ARE FABRICATED FROM 1/8" STEEL WITH WHITE OR BLACK TEXTURED POWDER COAT FINISHES - EASILY CREATE STRONG WORK SURFACES WITHOUT CUMBERSOME LEGS TO GET IN THE WAY:
AVAILABLE IN FOUR SIZES; REVERSIBLE DESIGN MAKES THEM VERSATILE AND EASIER TO USE. 3" X 3" - 45° NOTCHES ALLOW FOR STANDARD WALL CLEATS AND WIRE RUNS. MULTIPLE 1/4" DIA. MOUNTING HOLES PER SIDE (MOUNTING HARDWARE NOT INCLUDED). PACKAGED IN EQUAL QUANTITIES OF "RIGHTS" AND "LEFTS". IMPORTED.
|
|
|
|
Hardware Shelf And Support - Brackets
|
EASY LEVELING SHELF AND COUNTER BRACKETS
|
| 8"x11" Easy Level Bracket-wh
...plus other(s)
|
UNLIKE CONVENTIONAL SHELF BRACKETS, PATENT PENDING EASY LEVELING SHELF AND COUNTER BRACKETS CAN BE ADJUSTED TO MAKE SHELVES, COUNTERTOPS OR WORKSTATIONS LEVEL - ONCE ALIGNED, TOP AND BOTTOM SECTIONS BOLT TOGETHER SECURELY:
TESTED TO SUPPORT UP TO 640 LBS. WHEN ATTACHED FIRMLY TO WOOD STUDS, 16" ON CENTER. 19", 21" AND 27" BRACKETS HAVE A 1-3/8" DIA. PUNCHED HOLE FOR ROUTING CABLES, WIRING OR AIR LINES. WORK WITH 3/4" X 1-1/2" OR 1-1/2" X 1-1/2" CLEATS. NO CROSS BRACE REQUIRED. EASY ACCESS TO WALL ANCHOR SCREWS. WHITE OR BLACK POWDER COATED STEEL - SURFACE CAN BE PAINTED TO MATCH DECOR. ANSI/BHMA TESTED. IMPORTED.
|
|
|
|
Hardware Shelf And Support - Brackets
|
SUPER HEAVY DUTY SHELVING STANDARDS AND BRACKETS CAN HOLD LUMBER, PIPING, POWER TOOLS AND MORE
|
| 24" Hd Shelf Standard
...plus other(s)
|
SUPER HEAVY DUTY SHELVING STANDARDS AND BRACKETS ARE FORMED FROM 3/16" THICK, HEAVY GAUGE STEEL TO HOLD EVEN THE HEAVIEST OBJECTS, SAFELY:
WHEN PROPERLY INSTALLED ONTO THE 24" LONG STANDARDS, 10" AND 18" BRACKETS CAN EACH SUPPORT UP TO 500 LBS., 1" FROM THE TIP. BLACK POWDER-COAT FINISH FOR DURABILITY. STANDARDS ARE PREDRILLED FOR 3/8" DIA. FASTENERS (FASTENERS NOT INCLUDED>). USA.
|
|
|
|
Hardware Shelf And Support - Brackets
|
KV 187LL SHELF BRACKET WITH LOCK
|
| 12" Kv187ll Shelf Bracket-ano
|
|
|
|
Hardware Shelf And Support - Brackets
|
KNAPE & VOGT® 71/170 STANDARDS AND BRACKETS FOR SPECIALTY APPLICATIONS
|
| 8" Kv170 Shelf Bracket
...plus other(s)
|
KNAPE & VOGT® KV71 ANOCHROME™ NARROW FACE SHELVING STANDARDS COME IN FOUR LENGTHS WITH A FINISH THAT RESISTS RUST AND OXIDATION:
DURABLE 16 GAUGE STEEL, 5/16"W X 13/32"H ( MOUNTING SCREWS NOT INCLUDED). COMPATIBLE WITH KV170 ANOCHROME™ BOLTLESS BRACKETS, WHICH FIT AND SNAP INTO STANDARDS. ALSO COMPATIBLE WITH KV80 STANDARDS.
|
|
|
|
Hardware Shelf And Support - Brackets
|
QUICKLY AND EASILY ELIMINATE ANNOYING SUB-FLOOR SAGS OR SEAMS
|
| Seam-ender
|
ALSO A LEICHTUNG WORK SHOPS® PRODUCT
EACH OF THESE HEAVY-DUTY SUPPPORT SYSTEMS WILL HELP END SUB-FLOOR SAGS, DIPS AND WEAK SPOTS IN MINUTES - GREAT FOR ON-SITE CONSTRUCTION OR MANUFACTURED HOMES:
912-468 - WHETHER JOISTS SUPPORTING THE SUB-FLOOR ARE 2" X 8" OR 2" X 6", SAG-ENDER™ AUTOMATICALLY ADAPTS TO REMOVE SAGS AND DIPS - USE NARROW PATTERN FOR 2" X 6", WIDE PATTERN FOR 2" X 8" OR LARGER. PHILLIPS SCREWDRIVER, ADJUSTABLE WRENCH AND HAMMER REQUIRED FOR INSTALLATION. INCLUDES TWO ANGLED SUB-FLOOR PLATES, TWO REINFORCED SUPPORT ARMS, WOOD SCREWS, HEX HEAD BOLTS, INSERT LOCK NUTS, WASHERS AND COMPLETE INSTRUCTIONS.
912-461 - SEAM-ENDER™ TACKLES THE PROBLEM OF UNSIGHTLY SUB-FLOOR SEAM "POPS" - PARTICULARLY NOTICEABLE IN VINYL FLOORS: OFFENDING SHEET OF SUB-FLOOR IS PULLED BACK INTO ALIGNMENT, LEVEL WITH THE SEAM - USE ON MOST SUB-FLOORS AND JOISTS UP TO 2" X 10". PHILLIPS SCREWDRIVER AND ADJUSTABLE WRENCH REQUIRED FOR INSTALLATION. TWO ANCHOR PLATES, DOUBLE FLANGE JOIST BRACKET, CARRIAGE BOLTS, WASHERS, HEX NUTS, SCREWS AND COMPLETE INSTRUCTIONS INCLUDED.
WILL NOT DAMAGE FLOOR COVERINGS - NO NEED TO RIP UP CARPETING OR VINYL. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Shelf And Support - Brackets
|
SHELF BRACKETS THAT FOLD OUT OF THE WAY
|
| Folding Shelf Bracket-12"
...plus other(s)
|
GREAT ANYWHERE WHERE SHELVES NEED TO FOLD OUT OF THE WAY:
12" AND 8" STEEL BRACKETS AUTOMATICALLY LOCK INTO POSITION; LIFT THE SHELF AND THEY UNLOCK. GREY ENAMEL FINISH. SOLD IN PAIRS. USE #10 SCREWS (NOT INCLUDED).
|
|
|
|
Hardware Shelf And Support - Brackets
|
FOLDING SHELF BRACKETS HOLD UP TO 88 LBS. PER PAIR
|
| Folding Shelf Bracket
|
10" LONG FOLDING SHELF BRACKETS LOCK OPEN TO HOLD SHELVES UP TO 12" WIDE:
RELEASE BUTTON LETS SHELF FOLD DOWN AND OUT OF THE WAY WHEN NOT IN USE. YELLOW CHROMATE FINISH. MOUNT TO SHELVING WITH #8 SCREWS (NOT INCLUDED). SOLD IN PAIRS. IMPORTED
|
|
|
|
Hardware Shelf And Support - Brackets
|
LOCKING HOLDERS KEEP GLASS SHELVES IN PLACE
|
| 1/4" Glass Clip-chrome
...plus other(s)
|
LOCKING GLASS SHELF CLIPS FEATURE RUBBER TIPPED NYLON SCREWS TO SECURE GLASS:
BRASS OR CHROME FINISHES PROVIDE A DECORATIVE ACCENT. PLATED STEEL BRACKETS ARE 3/4" SQUARE. 941-602 AND 941-609 HAVE 5MM PINS AND INCLUDE NYLON BUSHINGS SO THEY CAN BE USED AS PIVOT HINGES FOR SMALL GLASS DOORS. NYLON INSERTS ARE NOT DESIGNED FOR USE AS SLEEVES IN SHELF APPLICATIONS.. SOLD IN BAGS OF 4.
|
|
|
|
Hardware Shelf And Support - Not Listed Elsewhere
|
MULTI-PURPOSE RACKING SYSTEM PROVIDES SIX LEVELS OF STORAGE
|
| Triton Lumber Rack
|
FOR INTERNAL OR EXTERNAL APPLICATIONS, THE TRITON® WRA001 WOODRACK SYSTEM WEIGHS LESS THAN 20 LBS., BUT STORES UP TO 110 LBS. ON EACH OF ITS SIX STORAGE LEVELS:
IDEALLY SUITED FOR WOOD, PIPES AND OTHER LONG ITEMS IN WORKSHOPS, GARAGES AND SHEDS OR ON FENCES AND WALLS. TWIN 41" HIGH STANDARDS ARE SPACED 4' TO 6' APART; RACKS PROJECT 12-13/16"; COMPLETE INSTALLATION INSTRUCTIONS INCLUDED. AUSTRALIA.
|
|
|
|
Hardware Shelf And Support - Pilasters & Standards
|
KNAPE & VOGT® SHELVING SYSTEM SUPPORTS UP TO 450 POUNDS
|
| 48" Kv82 Shelf Standard-black
...plus other(s)
|
THE KNAPE & VOGT® SERIES 82/182 SHELVING SYSTEM IS A GREAT CHOICE WHERE APPEARANCE AND STRENGTH ARE CRITICAL - IDEAL FOR SCHOOLS, HOSPITALS, OFFICES AND EVEN HOMES. SMOOTH, ROUNDED CORNERS GIVE A SOFTER AND LESS INTRUSIVE LOOK WHILE ALL-METAL, DUAL-TRACK STANDARDS AND "U"-SHAPED BRACKETS EASILY SUPPORT HEAVY LOADS - WHITE OR BLACK EPOXY FINISHES:
KV® 82 STANDARDS ARE 1.05" WIDE, PROJECT 0.69" AND ARE AVAILABLE IN 48", 72" AND 96" LENGTHS. UNIQUE COVER STRIPS PROVIDE A CLEAN AND APPEALING APPEARANCE. KV® 182 BRACKETS ARE 0.53" WIDE AND FASTEN ONTO STANDARDS USING LUGS. 5" LONG BRACKETS SUPPORT 425 LBS., 7" - 360 LBS., 9" - 370 LBS., 10-1/2" - 330 LBS., 12-1/2" - 300 LBS., 14-1/2" - 450 LBS., 18-1/2" - 400 LBS., 22-1/2" - 400 LBS. BOOKENDS SNAP-FIT INTO STANDARDS. 7" LONG UNIT IS 4-1/2" HIGH; 9" AND 10-1/2" ARE 5-3/4" HIGH. SHELF LOCATORS/JOINERS MOUNT ONTO SHELF BOTTOM TO STABILIZE SHELF ON BRACKETS, WHILE ALLOWING EASY REMOVAL (4 LOCATORS/JOINERS AND 8 SCREWS). WALL STANDARD SCREWS FASTEN STANDARDS ONTO WALLS (6, 2" LONG FLAT HEAD SCREWS, 6 WALL ANCHORS, 6 COVER TABS). SHELF BRACKET SCREWS ANCHOR SHELVES DIRECTLY ONTO BRACKETS (6, EACH, 1", 2" AND 3-1/8" LONG OVAL HEAD TAPPING SCREWS). NOTE: STANDARDS, BRACKETS, BOOKENDS AND HARDWARE SOLD SEPARATELY - SHELVES NOT INCLUDED. ALSO AVAILABLE IN BLACK OR WHITE, DISCONTINUED, TWIN-SLOT KNAPE & VOGT® SERIES E3200 HEAVY-DUTY SHELVING STANDARDS CAN BE INSTALLED USING 182 BRACKETS AND MOUNTING HARDWARE (NOT INCLUDED) - LIMITED TO QUANTITIES ON HAND. LIFETIME MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Hardware Shelf And Support - Pilasters & Standards
|
ADJUSTABLE, DURABLE KNAPE & VOGT® KV180 SHELVING BRACKETS DESIGNED FOR KV80 STANDARDS
|
| 36" Kv80 Anochrome Shelf Standard
...plus other(s)
|
KNAPE & VOGT® 16 GAUGE STEEL KV180 SHELF BRACKETS ARE AVAILABLE IN ELECTROPLATED ANOCHROME™ OR POWDER COATED BLACK OR WHITE FINISHES:
AVAILABLE IN 8" TO 20" LENGTHS - ADJUSTABLE ON 1" CENTERS. DESIGNED TO FIT AND SNAP INTO KV80 SHELF STANDARDS (ORDER SEPARATELY) FOR SECURE SUPPORT. USA.
|
|
|
|
Hardware Shelf And Support - Pilasters & Standards
|
KNAPE & VOGT® 83/183 OVERSIZE STANDARDS AND FLANGED BRACKETS FOR LONG RUNS OF SHELVING
|
| 48" Kv83 Shelf Standard-ano
...plus other(s)
|
DESIGNED FOR EXTRA-LONG APPLICATIONS, KNAPE & VOGT® KV83 OVERSIZE SHELVING STANDARDS AND BRACKETS COME IN FIVE LENGTHS WITH A FINISH THAT RESISTS RUST AND OXIDATION:
KV83 STANDARDS ARE MADE FROM 16GA STEEL, 3/4" WIDE X 1/2" HIGH - COMPATIBLE WITH ALL KV® SHELF BRACKETS FOR USE IN 1" ADJUSTMENT STANDARDS. BRACKETS ARE AVAILABLE IN CENTER (FLANGED BOTH SIDES) AND STYLES FOR LEFT- OR RIGHT-HAND SHELF ENDS. KV183 BRACKETS HAVE A WIDE FLANGE TO ALLOW BETTER FASTENING OF SHELF MATERIAL TO BRACKETS. ANOCHROME™ ELECTROPLATED FINISH.
|
|
|
|
Hardware Shelf And Support - Pilasters & Standards
|
KNAPE & VOGT® 87/186/187 STANDARDS AND BRACKETS LOCK TOGETHER FOR ADDED SECURITY
|
| 36" Kv87 Anochrome Shelf Standard
...plus other(s)
|
IDEAL FOR WORKSHOPS AND LIGHT INDUSTRIAL APPLICATIONS, KNAPE & VOGT® HEAVY DUTY SHELVING STANDARDS AND BRACKETS COME IN SIZES TO MEET MOST STORAGE REQUIREMENT AND ARE AVAILABLE WITH A WHITE POWDER COAT OR ANOCHROME™ FINISH:
KV87 STANDARDS ARE 12GA STEEL, 7/8" WIDE X 11/16" HIGH AND FEATURE 2" ADJUSTMENT INCREMENTS - 24", 36", 48", 60", 72", 84" AND 96" LENGTHS. KV186LL BRACKETS ARE 12GA STEEL, 4-5/16" HIGH AND WILL ACCOMMODATE SHELF DEPTHS OF 8" AND 10". KV187LL BRACKETS ARE 12GA STEEL, 5-1/16" HIGH FOR SHELF DEPTHS OF 12" 14", 16" AND 18"; 6-1/2" HIGH FOR SHELF DEPTHS OF 20", 22" AND 24". BOTH BRACKET STYLES FEATURE AN INJECTION-MOLDED RESIN LOCKING LEVER TO SECURE THE BRACKETS TO THE STANDARDS.
|
|
|
|
Hardware Shelf And Support - Pilasters & Standards
|
KNAPE & VOGT® KV144 ANOCHROME™ MIRROR STANDARDS SUPPORT BOTH MIRRORS AND SHELVES
|
| 48" Mirror Standard
...plus other(s)
|
DESIGNED FOR MIRRORED WALL SHELVING APPLICATIONS, KNAPE & VOGT® KV144 ANOCHROME™ MIRROR STANDARDS COME IN THREE LENGTHS OF DURABLE STEEL WITH A FINISH THAT RESISTS RUST AND OXIDATION:
1.13" FACE X 0.31" THICK; MIRRORS ARE HELD IN PLACE BY 0.25" OVERHANG ON EACH SIDE OF STANDARD - NOTCHES ACCOMMODATE SHELF BRACKETS (NOT INCLUDED). 48", 60" AND 72" LENGTHS (MOUNTING SCREWS NOT INCLUDED).
LIMITED TO QUANTITIES ON HAND
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
830-690 - KNAPE & VOGT® KV180 ANOCHROME™ SHELF BRACKETS.
|
|
|
|
Hardware Shelf And Support - Pilasters & Standards
|
KNAPE & VOGT® 85/185 ANOCHROME™ STANDARDS AND BRACKETS SUPPORT LONG RUNS OF SHELVING
|
| 48" Double Slotted Standard
...plus other(s)
|
FOR USE ANYWHERE STRONG SHELVING IS NEEDED, KNAPE & VOGT® KV85 ANOCHROME™ DOUBLE SLOT SHELVING STANDARDS COME WITH A FINISH THAT RESISTS RUST AND OXIDATION:
DURABLE 16GA STEEL, 1/2"H X 1-1/4"W WITH 1" HEIGHT ADJUSTMENT (#10 FLATHEAD MOUNTING SCREWS NOT INCLUDED). COMPATIBLE WITH KV185 ANOCHROME™ DOUBLE SLOT SHELVING BRACKETS, WHICH SNAP INTO STANDARDS. BRACKETS HAVE HOLES IN CROSS MEMBERS FOR ATTACHING TO SHELF. 8", 10" AND 12" BRACKETS ARE 16GA STEEL; 16" TO 24" ARE 14GA.
|
|
|
|
Hardware Shelf And Support - Pilasters & Standards
|
KNAPE & VOGT® KV71 ANOCHROME™ NARROW FACE SHELVING STANDARDS IDEAL FOR SPECIAL EFFECTS AND CUSTOM FIXTURE DESIGN
|
| 48" Kv71 Shelf Standard
...plus other(s)
|
DESIGNED FOR SPECIALITY APPLICATIONS, KNAPE & VOGT® KV71 ANOCHROME™ NARROW FACE SHELVING STANDARDS COME IN FOUR LENGTHS WITH A FINISH THAT RESISTS RUST AND OXIDATION:
DURABLE 16 GAUGE STEEL, 5/16"W X 13/32"H. 48", 60", 72" AND 96" LENGTHS ( MOUNTING SCREWS NOT INCLUDED).
COMPATIBLE WITH KNAPE & VOGT® KV170 ANOCHROME™ BOLTLESS SHELVING BRACKETS, WHICH FIT AND SNAP INTO STANDARDS: 8", 10", 12", 14" AND 16".
|
|
|
|
Hardware Shelf And Support - Pilasters & Standards
|
KV® 80/180 STANDARDS AND BRACKETS CREATE STRONG, DURABLE SHELVING
|
| 80br 48"brass Pl.standard
...plus other(s)
|
KNAPE & VOGT® KV80 SHELF STANDARDS MEASURE 5/8" WIDE X 13/32" HIGH AND CAN BE MOUNTED ONTO NEARLY ANY TYPE OF WALL:
REINFORCED KV180 SHELF BRACKETS LOCK INTO SLOTTED STANDARDS FOR SECURE, WEIGHT-BEARING SUPPORT. FULLY ADJUSTABLE IN 1" INCREMENTS - BOTH ARE MADE FROM 16GA STEEL. AVAILABLE IN ELECTROPLATED ANOCHROME™ OR BLACK OR WHITE POWDER-COATED FINISHES.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
HEAVY FRAMES AND SWAGED BRACES MAKE THESE THE STRONGEST SHELF BRACKETS AVAILABLE
|
| Hardware For Kv Bracket
...plus other(s)
|
KNAPE & VOGT® SERIES 208™ SHELF BRACKETS ARE MADE FROM 5MM THICK X 1-3/16" WIDE STEEL AND INCLUDE A 3/4" WIDE SWAGED STRUT:
WILL SUPPORT 1,000 LBS. PER PAIR WHEN INSTALLED ACCORDING TO MANUFACTURERS INSTRUCTIONS. FOUR SIZES IN BLACK OR WHITE EPOXY COATING. BRACKETS SOLD INDIVIDUALLY. OPTIONAL FASTENER PACKAGE INCLUDES THREE, EACH, 5/16" X 3" LAG SCREWS, 5/16" FLAT WASHERS AND #8 X 5/8" WOOD SCREWS.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
BRUSSO® 1/4" SOLID BRASS SHELF SUPPORTS
|
| 1/4" Solid Brass Shelf Pins
|
ADDING ELEGANT DETAIL TO BOOKSHELVES AND CABINETS, BRUSSO® K-10 1/4" SOLID BRASS SHELF SUPPORTS ARE COMPRISED OF A DECORATIVE TURNED SUPPORT AND A CYLINDRICAL PEG:
PEG IS 1/4" DIA. X 3/8" LONG; INSTALLED SHELF SUPPORT PROJECTS 7/16". USA.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
EASY-TO-INSTALL "STEALTH" SHELF CLIPS ARE INCREDIBLY STRONG AND TOTALLY INVISIBLE
|
| 7-3/4" "stealth" Shelf Clip
...plus other(s)
|
TO INSTALL A SHELF USING "STEALTH" SHELF CLIPS, FIRST CUT 1/8" WIDE BLIND DADOS AT LEAST 3/8" DEEP INTO EACH SHELF END:
NEXT, DRILL TWO 1/8" DIA. X 3/8" DEEP, PARALLEL HOLES - 7-3/4" OR 9-3/4" ON CENTER - INTO EACH OF THE SIDEWALLS WHERE THE SHELF IS TO BE INSTALLED. PRESS THE CLIP ENDS INTO THE HOLES (INSTALLATION REQUIRES TWO CLIPS PER SHELF), THEN SLIDE THE SHELF OVER AND ONTO THE CLIPS. STEEL CLIPS WORK LIKE SPRINGS IN TENSION TO REMAIN SECURELY IN PLACE. USA.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
KNAPE & VOGT® 255 SERIES METAL SHELF STANDARDS AND SUPPORTS IN FINISHES AND SIZES TO MEET ALMOST ANY REQUIREMENT
|
| Zinc Shelf Clip
...plus other(s)
|
KNAPE & VOGT® 255 SERIES METAL SHELF STANDARDS EASILY SURFACE MOUNT OR FIT INTO 5/8"W X 1/4"D DEEP GROOVES:
STRONG ENOUGH TO HOLD WOOD OR LAMINATE SHELVES IN BOOKSHELF AND SHELVING APPLICATIONS (USE RUBBER PAD SUPPORT 866-616 WITH GLASS SHELVES). AVAILABLE IN 24" TO 96" LENGTHS OF ZINC PLATED, BRASS LOOK OR ALMOND, WHITE OR BROWN EPOXY COATED 19 GAUGE STEEL. 17GA. ALUMINUM STANDARDS COME IN 48" TO 144" LENGTHS. MOUNT STANDARDS WITH #4 X 5/8" OR #4 X 3/4" SCREWS (NOT INCLUDED). STANDARDS SOLD INDIVIDUALLY SLOTS ALLOW SHELF SUPPORT ADJUSTMENTS IN 1/2" INCREMENTS - SUPPORTS SOLD IN PACKAGES OF 10, 20 OR 100. USA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#4 X 3/4" ZINC PLATED SCREWS - 800-523. #4 X 5/8" BRASS PLATED SCREWS - 800-523. #4 X 3/4" ANTIQUE BRASS PLATED SCREWS - 800-514.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
5MM SHELF SUPPORTS
|
| Clear 5mm Shelf Supports
...plus other(s)
|
SHELF SUPPORTS FIT INTO 5MM DIA. HOLES:
CHAMFERED ENDS FOR EASY INSERTION. PLASTIC COVERED TO PROTECT FINISHED SHELVES.R FOUR COLORS TO CHOOSE FROM - SOLD IN BAGS OF 100.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
SHELF PINS MAKE ADJUSTABLE STORAGE SIMPLE
|
| Brass Support W/1/4" Pin
...plus other(s)
|
SOLD IN BAGS OF 20 AND 100, SELECTED SHELF PINS ARE ALSO AVAILABLE IN COST-SAVING PACKAGES OF 1,000:
YOU'LL SAVE MORE WHEN YOU BUY IN BULK! IMPORTED.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
SOLID BRASS LIBRARY SHELF PINS AND SLEEVES
|
| 10mm Brass Bushing For 6.9mm Pin
...plus other(s)
|
SOLD SEPARATELY, SO YOU CAN PUT A SLEEVE INTO EACH HOLE BUT USE SHELF PINS ONLY WHERE NEEDED:
PRESS-TO-FIT BRASS SLEEVES STRENGTHEN HOLES AND ADD A DECORATIVE TOUCH WHILE BRASS PINS HOLD SHELVES IN PLACE: 876-277, 876-274 - 9MM AND 10MM DIA. SLEEVES USE 6.9MM DIA. SHELF PIN 876-270. 941-651 - THIS 9MM SLEEVE EXPANDS AS SHELF PIN 941-644 IS SCREWED IN, LOCKING THE ASSEMBLY IN PLACE. SOLD IN BAGS OF 10 OR 100. NOTE: SLEEVE DIMENSIONS ARE OUTSIDE DIAMETER - SHELF PINS MUST ONLY BE USED WITH SLEEVES.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
MOVING SHELVES IS EASY WITH SPEEDY SHELF SUPPORTS
|
| 18" Wh Speedy Shelf Support
...plus other(s)
|
WITH SPEEDY SHELF SUPPORTS THERE'S NO NEED TO REPLACE SHELF PINS, COUNT SHELF PIN HOLES OR REMOVE ITEMS WHEN MOVING SHELVES UP. AS A SHELF IS LIFTED, BUILT-IN SPRING-ACTION HOLDERS RETRACT AND THEN SNAP BACK INTO PLACE:
FASTEN 18" LONG, INTERLOCKING SPEEDY SHELF SUPPORTS ONTO LEFT AND RIGHT INNER SIDES OF CABINETS - SURFACE MOUNT OR CUT 5/8" WIDE X 3/8" DEEP DADOES. COUNTERSUNK AND PRE-DRILLED HOLES ALLOW INSTALLATION USING 3/4" STAPLES, 3/4" NAILS OR #4 X 3/4" SCREWS (STAPLES, NAILS OR SCREWS NOT INCLUDED). TO INSTALL A SHELF, REST ONE END ON A PAIR OF SHELF HOLDERS, PUSH IN THE OPPOSITE HOLDERS AND SNAP THE SHELF INTO PLACE. DURABLE WHITE, MEDIUM BROWN OR ALMOND CO-POLYMER SUPPORTS ARE EASILY TRIMMED USING A KNIFE OR SAW. UP TO 400 LBS. LOAD CAPACITY. USA.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
CLAMPS DON'T JUST SUPPORT GLASS OR WOOD SHELVES - THEY HOLD AND ALIGN THEM
|
| Nickel Glass Shelf Clamp
...plus other(s)
|
THESE INGENIOUS SHELF CLAMPS WILL SECURELY HOLD GLASS SHELVES UP TO 3/8" THICK OR WOOD SHELVES UP TO 7/8" THICK AND WILL EVEN MAKE UP FOR SLIGHT IRREGULARITIES IN LINE BORING:
THE SHELF'S WEIGHT MAKES THE CLAMPS PIVOT, LOCKING THE SHELF BETWEEN STURDY METAL PINS. SINCE THEY ROTATE, INDEPENDENTLY, THE CLAMPS CAN HELP LEVEL IRREGULAR SHELVES PLUS COMPENSATE FOR THE OCCASIONAL, SLIGHTLY MISALIGNED HOLE. CLAMPS FOR GLASS SHELVES FEATURE VINYL PADDED PINS THAT SUPPORT WITHOUT CAUSING DAMAGE. BOTH STYLES HAVE A BURNISHED NICKEL FINISH AND EACH REQUIRES A 5MM DIA. MOUNTING HOLE. SOLD IN PACKAGES OF EIGHT CLIPS.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Advanced Search Tools
Browse our
to see Sub Categories)