NARROW RESULTS Results are sorted by product category.
(Clicking on the  will
narrow the results by subcategory)
|
|---|
Machinery (10)
Shapers (10)
|
|
|
Machinery - Shapers
|
POWERMATIC® TILT SPINDLE SHAPERS HAVE PRODUCTION FACILITY CAPACITIES
|
| Tilt Spindle Shaper, Slide Table
...plus other(s)
|
|
|
|
Machinery - Shapers
|
JET® ENCLOSED STAND SHAPERS WITH YOUR CHOICE OF SPINDLES, MOTORS AND EXTRA LARGE WORK SURFACES
|
| 1-1/2hp Shaper 1/2" & 3/4" Cs
...plus other(s)
|
JET® ENCLOSED STAND SHAPERS COME IN A SELECTION THAT SHOULD MEET THE REQUIREMENTS OF THE MOST DISCRIMINATING WOODWORKER:
138-665 - JWS-22CS SHAPER - 1/2" AND 3/4" INTERCHANGEABLE SPINDLES: 1-1/2HP, 115/230V, 1PH TEFC REVERSING MOTOR INDUSTRIAL CONTROLS - 7,000 AND 9,000 RPM SPINDLE SPEEDS; 1-7/16" SPINDLE TRAVEL. 2-3/16" SPINDLE CAPACITY UNDER NUT. 5-1/4" DIA. TABLE OPENING. 18-1/8" X 22-3/8" CAST IRON TABLE WITH MITER GAUGE T-SLOT. INDEPENDENT 3" X 9-3/4" LEFT AND RIGHT FENCES ARE MICRO ADJUSTABLE. 40"H X 23"W X 25"D; 190 LBS. NET WEIGHT. 138-668 - JWS-34L SHAPER - 3/4" AND 1" INTERCHANGEABLE SPINDLES: 2HP, 230V, 1PH TEFC REVERSING MOTOR WITH MAGNETIC ON/OFF SWITCH - 8,000 AND 10,000 RPM SPINDLE SPEEDS; 2-7/8" SPINDLE TRAVEL. 3-3/16" SPINDLE CAPACITY UNDER NUT (3/4"); 2-3/16" (1"). 6-3/16" DIA. TABLE OPENING. 21-5/8" X 25" CAST IRON TABLE WITH MITER GAUGE T-SLOT. INDEPENDENT 3" X 11-1/4" LEFT AND RIGHT FENCES ARE MICRO ADJUSTABLE. 42-1/4"H X 25"W X 22"D; 317 LBS. NET WEIGHT. 138-671 - JWS-25C SHAPER - 1/2" AND 3/4" INTERCHANGEABLE SPINDLES: 3HP, 230V, 1PH TEFC REVERSING MOTOR WITH MAGNETIC ON/OFF SWITCH - 8,000 AND 10,000 RPM SPINDLE SPEEDS; 3" SPINDLE TRAVEL. 3-1/2" SPINDLE CAPACITY UNDER NUT. 7-1/4" DIA. TABLE OPENING. 25" X 25" CAST IRON TABLE WITH MITER GAUGE T-SLOT. INDEPENDENT 2-3/4" X 9-1/2" LEFT AND RIGHT FENCES ARE MICRO ADJUSTABLE. INCLUDES 7" X 25" CAST IRON EXTENSION WING. 44"H X 25"W X 25"D; 320 LBS. NET WEIGHT. SHAPERS ALSO INCLUDE REMOVABLE MOTOR COVERS, ACCESS DOORS, 1/4" AND 1/2" ROUTER BIT COLLETS, MITER GAUGES, CUTTER GUARDS, HOLDDOWNS, 4" DIA. DUST PORTS AND INSTRUCTIONS. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Shapers
|
WOODTEK 5HP SPINDLE SHAPER 5 SPEEDS
|
| 5hp Shaper, 1ph, 230v, 5-spd
|
WITH ITS IMPRESSIVE 5HP MOTOR, THE WOODTEK® PROFESSIONAL 5HP SPINDLE SHAPER HAS THE POWER AND STABILITY IT TAKES TO RUN ALL DAY WITH CONSISTENT RESULTS:
EXTRA LARGE AND HEAVY CAST IRON TABLE WITH 3/8" X 3/4" MITER GAUGE T-SLOT PROVIDES STABILITY AND ROOM FOR BIG JOBS. INDEPENDENTLY ADJUSTABLE CAST IRON AND WOOD SPLIT FENCES ALLOW USE OF VIRTUALLY ANY CUTTER AND OPERATION. TWO OVERSIZED ACCESS DOORS MAKE SPEED CHANGES AND MAINTENANCE EASY. ENCLOSED FORMED STEEL STAND, MITER GAUGE, 4 HOLDDOWNS, TOOL KIT, HARDWARE AND INSTRUCTIONS INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 5HP, 230V, 28A, 1PH, 3,400 RPM, TEFC - "V" BELT DRIVE (POWER CORD AND PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC W/REVERSE. SPINDLE SIZES - 3/4" AND 1-1/4". SPINDLE LENGTHS - 4-1/8" AND 5-3/8". SPINDLE TRAVEL - 3-13/16". CAPACITY UNDER NUT - 3-1/16" AND 3-7/8". MAXIMUM CUTTER DIAMETER - 7-1/2". SPINDLE SPEEDS (5) - 3,000, 4,000, 6,000, 8,000 AND 10,000 RPM. TABLE SIZE - 36"W X 28-1/4"D X 3-1/2" THICK CAST IRON. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 34-3/4"H X 36"W X 28-1/4"D. NET WEIGHT - 548 LBS. SHIPPING WEIGHT - 682 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Shapers
|
WOODTEK 7-1/2HP SPINDLE SHAPER
|
| 7-1/2hp Shaper 3ph 230/460v 5-spd
|
WITH ITS POWERFUL MOTOR AND FIVE OPERATING SPEEDS, THE WOODTEK® 7-1/2HP SHAPER IS AN INDUSTRIAL MACHINE THAT STANDS READY FOR ALMOST ANY PROJECT:
INDEPENDENTLY ADJUSTABLE, SPLIT CAST IRON FENCE, WITH MICRO-ADJUST, ALLOWS USE OF VIRTUALLY ANY CUTTER AND OPERATION. ABOVE- AND BELOW-TABLE DUST COLLECTION FOR EFFICIENT CHIP REMOVAL. TWO OVERSIZED ACCESS DOORS MAKE SPEED CHANGES AND MAINTENANCE EASIER. FORMED STEEL BASE ADDS DURABILITY. FOUR HOLDDOWNS, HARDWARE AND INSTRUCTIONS INCLUDED. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 7.5HP, 220V/440V, 20A/10A, 3PH, 3,450 RPM, TEFC - "V" BELT DRIVE (POWER CORD AND PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC W/REVERSE. SPINDLE SIZE - 1-1/4". SPINDLE TRAVEL - 3-5/16". CAPACITY UNDER NUT - 5-1/8". MAXIMUM CUTTER DIAMETER - 7-3/8". SPINDLE SPEEDS (5) - 3,000, 4,000, 6,000, 8,000, 10,000 RPM. TABLE INSERTS/DIAMETER - TWO: 4-9/16", 7-3/4". TABLE SIZE - 33-3/4"D X 47-1/4"W CAST IRON; 3/8" X 3/4" "T" MITER SLOT. FENCE - 4"H X 19-3/16"W CAST IRON (2 EACH). DUST PORT (2) - 4" DIA. OVERALL DIMENSIONS - 40"H X 47-1/4"W X 33-3/4"D. NET WEIGHT - 1,000 LBS. SHIPPING WEIGHT - 1,134 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Shapers
|
POWERMATIC® PM2700 2 SPEED SHAPER IS LOADED WITH FEATURES
|
| Pm2700 Shaper 3hp 1ph 230v
...plus other(s)
|
THE POWERMATIC® PM2700 SHAPER FEATURES DIGITAL SPINDLE HEIGHT READOUT, 3/4" AND 1-1/4" INTERCHANGEABLE SPINDLE COLLETS AND YOUR CHOICE OF MOTOR OPTIONS:
3HP OR 5HP, 230V, 1PH OR 3PH TEFC MOTOR - 7,500 AND 10,000 RPM REVERSIBLE SPINDLE SPEEDS. 4" SPINDLE TRAVEL. 30" X 40" CAST IRON TABLE W/MITER SLOT AND INDEPENDENTLY ADJUSTABLE 4-7/8" X 18-3/4" ALUMINUM FENCE. 7-3/8" DIA. TABLE OPENING - 2-3/4 AND 3-7/8" DIA. INSERT OPENINGS. ABOVE AND BELOW TABLE 4" DUST PORTS - MINIMUM 600 CFM REQUIRED. DELUXE MITER GAUGE, CHROME PLATED WHEELS AND FEATHERBOARD HOLD DOWNS INCLUDED. 45"H X 40"W X 37"D. 664 LBS. NET WEIGHT; 690 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURERS WARRANTY. IMPORTED.
|
|
|
|
Machinery - Shapers
|
WOODTEK 3HP SPINDLE SHAPER 2 SPEED
|
| 3hp Shaper 1ph 230v 2-spd
...plus other(s)
|
THE WOODTEK® 3 HP REVERSIBLE SPINDLE SHAPER HAS THE POWER AND STABILITY IT TAKES TO RUN ALL DAY WITH CONSISTENT RESULTS:
TABLE INSERT IS A GENEROUS 6-3/8" TO MAKE CHANGING CUTTERHEADS EASIER. DURABLE CAST IRON TABLE HAS MITER GAUGE T-SLOT. LOCKING HAND WHEEL ADJUSTS CUTTERHEAD HEIGHT. ENCLOSED STAND, MITER GAUGE, TWO PIECE ADJUSTABLE WOOD FENCE, HOLDDOWN SPRINGS, TOOL KIT, HARDWARE AND COMPLETE INSTRUCTIONS INCLUDED. 933-580 - SHAPER WITH 10" X 21-1/2" SLIDING CAST IRON TABLE MAKES RAISING PANELS SAFER, QUICKER AND FAR MORE ACCURATE, ESPECIALLY ON TRICKY END GRAIN PASSES. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS
MOTOR - 3HP, 230V, 18A, 1PH, 3,450 RPM - "V" BELT DRIVE (3-1/2' LONG POWER CORD INCLUDED; PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC W/REVERSE. SPINDLES - 1/2", 3/4" AND 1-1/4"; 1/2" ROUTER COLLET SPINDLE SPEEDS - 7,500 & 10,000 RPM. SPINDLE TRAVEL - 3". CAPACITY UNDER NUT - 4" ON 1-1/4" SPINDLE. TABLE SIZE - 23" X 29". FENCE SIZE - 3-3/4" X 13", EACH. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 40"H X 23"W X 25"D. SHIPPING WEIGHT - 410 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Shapers
|
WOODTEK 2HP SPINDLE SHAPER 2 SPEED
|
| 2hp Shaper, 2 Speeds 1ph 230v
...plus other(s)
|
THE WOODTEK® 2HP REVERSIBLE SPINDLE SHAPER IS PERFECT FOR THE SMALL SHOP OR BEGINNING WOODWORKER:
DURABLE CAST IRON TABLE HAS MITER GAUGE "T" SLOT FOR MORE ACCURATE SHAPING. LOCKING HAND WHEEL ADJUSTS CUTTERHEAD HEIGHT. ENCLOSED STAND, MITER GAUGE, TWO PIECE ADJUSTABLE FENCE, HOLDDOWN SPRINGS, TOOL KIT, HARDWARE AND COMPLETE INSTRUCTIONS INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS
MOTOR - 2HP, 230V, 1PH - "V" BELT DRIVE (3-1/2' POWER CORD INCLUDED; PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC W/REVERSE. SPINDLES - 1/2" & 3/4"; 1/2" ROUTER BIT COLLET. SPINDLE SPEEDS - 7,000 & 11,000 RPM. SPINDLE TRAVEL - 3". TABLE SIZE - 19-3/4" X 19-3/4" OVERALL DIMENSIONS - 34"H X 19-3/4"W X 19-3/4"D. NET WEIGHT - 286 LBS. SHIPPING WEIGHT - 363 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Shapers
|
WOODTEK 3 WORK STATION SHAPER
|
| 3 Work Station Shaper 5hp 3ph
...plus other(s)
|
USEFUL FOR ALMOST ANY SHAPING OPERATION, THE WOODTEK® THREE HEAD HEAVY DUTY SHAPER IS DESIGNED TO LET YOU MAKE THE THREE CUTS NEEDED IN CABINET DOOR MAKING (COPE, STICK AND PANEL RAISING) WITHOUT HAVING TO CHANGE OR ADJUST CUTTERS OR SPINDLE SPEEDS:
THREE SEPARATE MOTORS, EACH WITH ITS OWN SWITCH AND ADJUSTMENTS, ALLOW YOU TO SET CORRECT SPEEDS FOR EACH OPERATION. HAND WHEEL ADJUSTS CUTTERHEAD HEIGHT. HEAVY DUTY CAST IRON TABLE WITH DOVETAILED MITER GAUGE SLOTS TO HELP ENSURE SAFETY. INCLUDES TABLE INSERTS, SIX SPINDLES, ONE ROUTER COLLET, MITER GAUGE, 3 ADJUSTABLE FENCES, HOLDDOWNS AND COMPLETE INSTRUCTIONS. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS
MOTORS (3) - 3HP, 230V, 1PH, 14A OR 5HP, 230V, 3PH, 7A - "V" BELT DRIVE (POWER CORD AND PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. SPINDLES (3) - 3/4" & 1-1/4" AND ONE, 1/2" ROUTER BIT COLLET. SPINDLE SPEEDS - 7,000 & 10,000 RPM. SPINDLE TRAVEL - 4". TABLE SIZE - 26" X 14" X 12". FENCE SIZE (3) - 3-5/8" X 11-1/2". DUST PORT - 4" DIA. OVERALL DIMENSIONS - 43"H X 40"W X 46"D. NET WEIGHT - 880 LBS. SHIPPING WEIGHT - 1,177 LBS. (DUE TO WEIGHT, FREIGHT COMPANY IS NOT RESPONSIBLE FOR UNLOADING). NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Shapers
|
SURFACE PLANE AND MILL FLAT OR CURVED MOLDINGS WITH THE ORIGINAL WILLIAMS & HUSSEY MOLDER/PLANER PACKAGE
|
| Model 154 Molder
...plus other(s)
|
MOLDINGS, CASINGS, ASTRAGALS, CROWNS - EVEN RAISED PANELS; YOUR ORIGINAL WILLIAMS & HUSSEY MODEL 154 MOLDER/PLANER PACKAGE CAN PRODUCE MORE THAN 98% OF ALL MOLDING PATTERNS USED TODAY:
2HP, 220V, 1PH TEFC MOTOR INCLUDING SWITCH AND CORD (PLUG NOT INCLUDED), PLUS BELT AND PULLEY ASSEMBLY. 7,000 RPM ARBOR; 15 FPM FEED RATE. WELDED STEEL STAND, ROLLER ASSEMBLY, TABLE GUIDES AND DUST HOOD WITH 4" DIA. OUTLET. 3/4" MAXIMUM PROFILE DEPTH; 6-3/4" MAXIMUM PROFILE WIDTH; PLANES 7" WIDE. 9" MINIMUM STOCK LENGTH; 1/4" MINIMUM THICKNESS; 8" MAXIMUM THICKNESS (ALL MOLDING CUTS MUST BE MADE AT FULL DEPTH AND IN A SINGLE PASS). INCLUDES KNIFE CATALOG (MOLDER/PLANER KNIVES NOT INCLUDED), GEAR OIL AND MANUAL. 45"H X 20"W X 33"L. NET WEIGHT 215 LBS.; SHIPPING WEIGHT 220 LBS. SEVEN-YEAR LIMITED MANUFACTURER'S WARRANTY ON MACHINE. TWO-YEAR LIMITED MANUFACTURER'S WARRANTY ON MOTORS. MACHINE IS MADE IN USA - MOTOR IS IMPORTED. OPTIONAL EJ92 ELLIPTICAL JIG LETS YOU EASILY PRODUCE DIVERSIFIED MOLDING. FROM A 7" RADIUS WITH A MAXIMUM STOCK OF 6-1/2", THE JIG WILL SATISFY MOST MOLDING REQUIREMENTS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST
WILLIAMS & HUSSEY HSS MOLDER/PLANER KNIVES - 956-563.
|
|
|
|
Machinery - Shapers
|
43-460 SHAPER + MOBILE BASE + AP400
|
| 43-460 Shaper + Mobile Base + Ap400
...plus other(s)
|
|
|
|
Advanced Search Tools
Browse
