|
|
|
Machinery Accessories - Scroll Saws
|
OLSON® FRETLITE™ MAKES FRETWORK SCROLLSAW BLADE INSERTION EASY
|
| Scrollsaw Fretlite
|
THE OLSON® FRETLITE™ MOUNTS BELOW THE TABLE TO ILLUMINATE PILOT HOLES FROM UNDERNEATH THE WORKPIECE FOR FRETWORK:
EASILY INSTALLED ON ANY SCROLLSAW - BUILT-IN MAGNETS FOR STEEL TABLES; ADHESIVE PLATE FOR ALUMINUM AND NON-FERROUS TABLES. HIGH INTENSITY LED BULB WITH SIMPLE PUSHBUTTON SWITCH; INCLUDES 2 LITHIUM BATTERIES FOR UP TO 124 HOURS USE.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Machinery Accessories - Scroll Saws
|
BLADES RUN SMOOTHER AND LAST LONGER WITH FASTTRAK BAND SAW TUNING STONE
|
| Bandsaw/scrollsaw Tuning Stone
|
ROUNDING THE BACK OF YOUR BAND SAW BLADE WITH THE SPECIALLY FORMULATED, SILICON CARBIDE FASTTRAK TUNING STONE WILL INCREASE BLADE LIFE AND INCREASE THE LIFE OF THE THRUST BEARING:
JUST REST THE STONE AGAINST THE BACK OF THE BLADE WHEN THE SAW IS RUNNING AND SLIDE IT BACK AND FORTH FOR A COUPLE OF MINUTES TO ROUND THE BACK OF THE BLADE. THIS WILL ALSO CLEAN THE WELD - BLADES WILL RUN SMOOTHER AND LAST LONGER. USA.
|
|
|
|
Machinery Accessories - Scroll Saws
|
SPEED FRET WORK WITH A DELTA® QUICKSET II® SCROLLSAW BLADE CHUCK
|
| Quickset Ii Scrollsaw Blade Chuck
|
THE DELTA® MODEL 40-251 QUICKSET II® BLADE CHUCK GREATLY SIMPLIFIES THE TEDIOUS AND TIME CONSUMING TASK OF BLADE THREADING IN SCROLLSAW FRET WORK INVOLVING INSIDE CUTOUTS AND DESIGNS:
NO BLADE CENTERING TOOLS OR WRENCHES REQUIRED - FASTEST AND EASIEST BLADE THREADING AND CHANGING SYSTEM ON THE MARKET. INCLUDES 0.053" WIDE/0.018" THICK/12TPI SKIP TOOTH BLADE, HEX KEY FOR ADJUSTING CHUCK JAWS TO ACCOMMODATE VARIOUS BLADE THICKNESSES, A ROLL PIN REMOVAL/INSERTION PEG TO FACILITATE REMOVAL OF THE OLD SCROLLSAW CHUCK AND REPLACEMENT WITH THE NEW CHUCK AND INSTRUCTIONS. FITS DELTA® 16" VARIABLE SPEED, Q-3 18" VARIABLE SPEED AND P-20 20" SCROLLSAWS. IMPORTED.
|
|
|
|
Machinery Accessories - Scroll Saws
|
SCROLLSAW SAWDUST COLLECTOR BOXES KEEP WORK AREAS CLEAN
|
| Dust Collection Box
...plus other(s)
|
ALSO A LEICHTUNG WORK SHOPS® PRODUCT
IN ADDITION TO MINIMIZING CLEAN UP, SAWDUST COLLECTOR BOXES HELP KEEP WOOD PARTICLES OUT OF THE AIR:
ACRYLIC BOX COLLECTS 90% OF THE CUTTINGS FROM BENEATH THE BLADE. FITS UNDER TABLE BENEATH BLADE SLOT AND MOUNTS WITH MAGNETS (INCLUDED); EASILY EMPTIED. 42-507 - FITS 15" SCROLLSAWS BY DELTA®, GRIZZLY®, AMT, BUFFALO, TRUE VALUE AND PENNSTATE®. 49-098 - FITS 16" DELTA® MODEL 40-150.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Machinery Accessories - Scroll Saws
|
SCROLLSAW BLADE INSTALLATION FIXTURE SPEEDS BLADE CHANGES
|
| Scroll Blade Fixture
|
THE SCROLLSAW BLADE INSTALLATION FIXTURE MAKES IT EASY TO INSTALL AND REMOVE BLADES FROM STANDARD BLADE HOLDERS:
JUST PLACE THE HOLDER IN AND THE FIXTURE KEEPS IT IN PLACE WHILE ONE HAND HOLDS THE BLADE AND THE OTHER LOOSENS THE SCREW. MOUNTS TO FLANGE BENEATH THE WORK TABLE, SO IT'S ALWAYS THERE WHEN YOU NEED IT (FOR FLAT BLADES ONLY).
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Machinery - Scroll Saws
|
PROXXON TWO SPEED SCROLLSAW EXCELS AT INTERNAL CUTS IMPOSSIBLE TO MAKE WITH BAND OR CIRCULAR SAWS
|
| 2 Speed Bench Top Scroll Saw
|
THE PERFECT MACHINE FOR TOOL AND DIE MAKING, MODEL BUILDING, TOY REPAIRS, PUZZLE SAWING, ARCHITECTURAL WORK, ANTIQUE RESTORATION AND MORE, THE PROXXON MODEL 38 092 TWO SPEED SCROLLSAW CAN BE USED ON WOOD, ACRYLICS, FIBERGLASS, POLYSTYRENE FOAM, RUBBER, LEATHER AND CORK:
120V, 900/1,500 SPM SUPER QUIET MOTOR. 15.75" THROAT DEPTH; 2" WOOD CUT DEPTH; 1.2" PLASTICS; 0.4" NON-FERROUS METALS. AIR BLOWER WITH ADJUSTABLE NOZZLE PROVIDES CLEAR CUT LINE VISIBILITY. 14.25" X 7.1" ALUMINUM DIE CAST TOP; (TABLE TILTS UP TO 45° FOR MITER CUTS). CAST IRON BASE FOR VIBRATION FREE OPERATION AND STABILITY. 11.8" X 20.9" X 11" OVERALL. INCLUDES FIVE COARSE AND FIVE FINE BLADES, T-ALLEN KEY, ADAPTER TO CONNECT VACUUM CLEANER OR DUST EXTRACTOR AND INSTRUCTION MANUAL. WEIGHS 44 LBS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
122-681 - THE NEW SCROLL SAW HANDBOOK© - CLICK HERE. 122-822 - CREATIVE SCROLL SAW SEGMENTATION© - CLICK HERE. 825-343 - CLASSIC FRETWORK SCROLL SAW PATTERNS© - CLICK HERE.
|
|
|
|
Machinery - Scroll Saws
|
WOODTEK 24" SCROLL SAW
|
| 24" Scroll Saw
|
WITH A WOODTEK® 24" BENCHTOP SCROLLSAW YOU GET A HEAVY DUTY MACHINE BACKED UP BY A SOLID, CAST IRON TABLE AND BODY FOR ROCK SOLID, SMOOTH CUTTING
LARGER THROAT PROVIDES GREATER CAPACITY WHILE TWO CUTTING SPEEDS ADD VERSATILITY. WRENCH FREE BLADE THREADING AND CHANGING. ADJUSTABLE DUST BLOWER KEEPS CUTTING LINE FREE OF CHIPS AND DUST. SAWBLADES AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1/8HP, 120V, 2.2A, 1PH - (POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL - KEYED FOR SAFETY. BLADE SPEED - 860 AND 1,720 CSPM. SAWBLADE - 5" LONG, PIN OR PLAIN END. TABLE - 20-5/8" X 11-1/8" W/2-1/2" DIA. X 1/8" THICK REMOVABLE INSERT. TABLE TILTS 45° LEFT. MAXIMUM THROAT DEPTH - 24-1/2". MAXIMUM CUT DEPTH @ 90° - 2-1/2". MAXIMUM CUT DEPTH @ 45° - 13/16". OVERALL DIMENSIONS - 15-1/4"H X 34-1/2"W X 13-1/4"D. NET WEIGHT - 75 LBS. SHIPPING WEIGHT - 90 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
THE NEW SCROLL SAW HANDBOOK© - 122-681. CREATIVE SCROLL SAW SEGMENTATION© - 122-822. CLASSIC FRETWORK SCROLL SAW PATTERNS© - 825-343.
|
|
|
|
Machinery - Scroll Saws
|
EXCALIBUR PRECISION SCROLL SAWS HAVE TILTING HEADS FOR WORKPIECE STABILITY
|
| 21" Scroll Saw + Stand + Foot Switch
...plus other(s)
|
THE EXCALIBUR EX-21 VS 21" SCROLL SAW HAS A HEAD THAT TILTS 45º LEFT AND RIGHT, TILTING THE BLADE, NOT THE TABLE, KEEPING THE WORKPIECE LEVEL FOR BETTER CONTROL AND MORE ACCURATE CUTS:
TABLE TILTS ON DUAL TRUNNIONS WITH A PIN LOCATOR FOR COMMON ANGLES. MAKE PRECISE CUTS IN MATERIAL UP TO 2" THICK. 13-1/2" X 23-1/2" SOLID STEEL TABLE HAS ZERO MAINTENANCE ANTI-FRICTION COATING. 400-1550 STROKES/MINUTE VARIABLE SPEED, 120V, 1.3A MOTOR (115VAC INPUT REQUIRED). QUICK BLADE CHANGES WITH FINGER OPERATED BLADE CLAMPS. NO TOOLS REQUIRED; (USES UNPINNED 5" SCROLL SAW BLADES). EASY ACCESS SPEED AND TENSION CONTROLS. ONBOARD DUST BLOWER. 32"L X 15"W X 15"H. 65 LBS. NET WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
THE NEW SCROLL SAW HANDBOOK© - 122-681.
|
|
|
|
Machinery - Scroll Saws
|
DELTA® 20" VARIABLE SPEED SCROLL SAW IS LOADED WITH FEATURES
|
| 20" Vs Scroll Saw W/stand & Work Lamp
...plus other(s)
|
|
DELTA'S VERY FIRST PRODUCT WAS A SMALL HAND-CRANK SCROLL SAW BACK IN THE 1920S. NOW DELTA IS RETURNING TO ITS ROOTS WITH THE 40-695 20" VARIABLE SPEED SCROLL SAW. IT'S LOADED WITH FEATURES, AND BACKED BY DELTA'S 5-YEAR WARRANTY. DUAL PARALLEL-LINK ARM INCREASES ACCURACY BY KEEPING THE BLADE PERPENDICULAR TO THE TABLE AND REDUCING VIBRATION AND NOISE. TOOL FREE BLADE CLAMP ALLOWS THE BLADE TO BE CHANGED IN SECONDS. UP-FRONT CONTROLS GIVE THE USER CONVENIENT ACCESS TO ON/OFF SWITCH, SPEED CONTROL, AND BLADE TENSIONING LEVER. ELECTRONIC VARIABLE SPEED CAN BE ADJUSTED FROM 400-1,750 SPM FOR A WIDE ARRAY OF CUTTING APPLICATIONS. OVERSIZED WOODWORKER'S TABLE PROVIDES EXCELLENT MATERIAL SUPPORT AND BEVELS 0°-45 ° LEFT AND RIGHT. FLEXIBLE WORK LIGHT ILLUMINATES THE WORK SURFACE FOR BETTER VISIBILITY. HEAVY-DUTY ALL-METAL STAND PROVIDES A SOLID WORKSTATION FOR THE SAW AND KEEPS WORK BENCHES CLEAR FOR OTHER USES. MACHINE STAND, WORK LIGHT, AND TWO BLADES INCLUDED. 5-YEAR WARRANTY.
|
|
|
|
Machinery - Scroll Saws
|
EXCALIBUR PRECISION SCROLL SAWS HAVE TILTING HEADS FOR WORKPIECE STABILITY
|
| 30" Scroll Saw W/tilting Table
...plus other(s)
|
THE EXCALIBUR EX-30 VS 30" SCROLL SAW HAS A HEAD THAT TILTS 45º LEFT AND RIGHT, TILTING THE BLADE, NOT THE TABLE, KEEPING THE WORKPIECE LEVEL FOR BETTER CONTROL AND MORE ACCURATE CUTS:
CUT TO THE CENTER OF 5' LONG WORK PIECES WITH THE 30" THROAT. MAKE PRECISE CUTS IN MATERIAL UP TO 2" THICK. TABLE TILTS ON DUAL TRUNNIONS WITH A PIN LOCATOR FOR COMMON ANGLES. LARGE 14" X 32-1/2" SOLID STEEL TABLE HAS ZERO MAINTENANCE ANTI-FRICTION COATING. 400-1550 STROKES/MINUTE VARIABLE SPEED, 120V, 1.3A MOTOR (115VAC INPUT REQUIRED). QUICK BLADE CHANGES WITH FINGER OPERATED BLADE CLAMPS. NO TOOLS REQUIRED; (USES UNPINNED 5" SCROLL SAW BLADES). EASY ACCESS SPEED AND TENSION CONTROLS. ONBOARD DUST BLOWER. 43-1/4"L X 15-1/2"W X 15-1/4"H. 114 LBS. NET WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
THE NEW SCROLL SAW HANDBOOK© - 122-681.
|
|
|
|
Machinery - Scroll Saws
|
DEWALT® 20" SCROLL SAW CUTS VIBRATION TO CUT MORE PRECISELY
|
| 20" Vs Scroll Saw
...plus other(s)
|
THE HEAVY DUTY DEWALT® MODEL DW788 20" SCROLL SAW FEATURES A DOUBLE PARALLEL LINK ARM TO SIGNIFICANTLY REDUCE VIBRATION, NOISE AND BLADE BREAKAGE, RESULTING IN EXTREMELY ACCURATE CUTS:
120VAC, 1.3A, 400-1,750 SPM MOTOR - 3/4" STROKE LENGTH. 20" THROAT WITH 2" CUT DEPTH. TOOL FREE BLADE CLAMP USES 5" PLAIN END BLADES. MECHANICAL ON/OFF SWITCH, ELECTRONIC VARIABLE SPEED CONTROL, FLEXIBLE DUST BLOWER AND BLADE TENSIONING LEVER ON FRONT UPPER ARM FOR ADDED CONVENIENCE. 19-1/4" X 26-1/2" CAST IRON "TEARDROP" TABLE TILTS 45°, LEFT AND RIGHT. HEX WRENCH, BLADES AND INSTRUCTION MANUAL INCLUDED. 56 LBS. NET WEIGHT; 64.5 LBS. SHIPPING WEIGHT. OPTIONAL DW7880 SCROLL SAW STAND IS ALL METAL CONSTRUCTION AND HAS ADJUSTABLE LEGS. OPTIONAL DW7881 SCROLL SAW LIGHT HAS FLEXIBLE NECK FOR EASY POSITIONING (25W BULB INCLUDED). ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SET 963-322 AVAILABLE FOR LIMITED TIME. SET INCLUDES 913-819 20 VARIABLE-SPEED SCROLL SAW, 914-078 SCROLL SAW STAND AND 914-085 SCROLL SAW WORKLIGHT.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
THE NEW SCROLL SAW HANDBOOK© - 122-681.
|
|
|
|
Advanced Search Tools
Browse
will