Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Fasteners (62)
Wood Screws (62)
|
|
|
Fasteners - Wood Screws
|
BLACK-FINISH, PYRAMID HEAD SCREWS FOR RUSTIC HARDWARE
|
| #12x1-1/4 Pyramid Head Screw-combo
...plus other(s)
|
DECORATIVE HEADS PROVIDE THE FINISHING TOUCH FOR RUSTIC HARDWARE - ACORN PYRAMID HEAD SCREWS ARE AVAILABLE IN SIZES TO FIT MOST APPLICATIONS:
SLOTTED OR COMBINATION SLOTTED/PHILLIPS DRIVE. PACKED IN CLEAR PLASTIC BOXES. BOX COUNT VARIES BY SCREW SIZE.
|
|
|
|
Fasteners - Wood Screws
|
CONFIRMAT STYLE CONNECTING SCREWS JOIN PARTICLEBOARD, MDF OR MELAMINE CABINET BOXES
|
| 7mmx50mm Fl-pz Confirm W/hol Zp
...plus other(s)
|
FOR BEST PERFORMANCE, CONNECTING SCREWS SHOULD BE INSTALLED BY BORING A PILOT HOLE USING THE OPTIONAL STEPPED DRILL BIT:
BOTH ARE 7MM DIAMETER X 50MM LENGTH WITH #3 POZI DRIVE. 128-498 HAVE COUNTERSINKING NIBS AND SHARP POINT. 128-495 HAVE FLAT POINT AND SMOOTH UNDERSIDE OF HEAD. BOTH ARE BRIGHT ZINC PLATED; SOLD IN BAGS OF 100. OPTIONAL CONFIRMAT STYLE STEP DRILL BIT IS 5MM/7MM/10MM X 5-3/4".
|
|
|
|
Fasteners - Wood Screws
|
#4 X 5/8" FLAT HEAD STATUARY BRONZE WOOD SCREWS"
|
| #3x5/8 Fl-ph Hdw Screws Stat Brnz
...plus other(s)
|
STATUARY BRONZE PLATED SCREWS MATCH DARK ANTIQUE HARDWARE FINISHES. IN PAST YEARS, FURNITURE HARDWARE WAS FINISHED IN STATUARY BRONZE. THIS FINISH LOOKED GREAT WITH TRADITIONAL FURNITURE DESIGNS AND FINISHES. OVER THE YEARS, STATUARY BRONZE SCREWS HAVE BECOME HARDER TO FIND, YET MOST OF THE HARDWARE IS STILL AVAILABLE:
USE THESE SCREWS FOR RESTORING OLDER FURNITURE OR CREATING NEW CLASSICS - FLAT AND PAN HEAD STYLES."
|
|
|
|
Fasteners - Wood Screws
|
BLUM® T59.3570 TANDEM™ DRAWER SLIDE SPACERS
|
| 6.3mmx13mm Fl-pz Euro Screws Np
...plus other(s)
|
|
BLUM® T59.3570 TANDEM™ SPACER BLOCKS ARE USED TO MOVE TANDEM PLUS™ SLIDES AWAY FROM CABINET SIDES FOR CLEARANCE FOR INTERIOR DRAWERS OR ROLL-OUT TRAYS: 25MM (1") THICK PLASTIC SPACER BLOCKS ARE FASTENED TO CABINET SIDES AND SLIDES USING 13.5MM EURO SCREWS - TWO SPACERS PER RUNNER ON SLIDES FROM 9" TO 15"; THREE SPACERS PER SLIDE FOR LONGER SLIDES. PACKED 5 PAIRS OF SPACERS AND 40 SCREWS PER BAG. BOXES OF 100 SPACERS REQUIRE 807-275 EURO SCREWS (SOLD SEPARATELY). LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA."
|
|
|
|
Fasteners - Wood Screws
|
KREG® POCKET HOLE SCREWS
|
| #8x1-1/4" Coarse Rwh Pocket Screws
...plus other(s)
|
KREG® POCKET HOLE SCREWS FEATURE LARGE ROUND WASHER HEADS THAT PROVIDE SUPER HOLD IN THE BOTTOM OF THE POCKET:
COARSE THREADS FOR SOFT WOODS AND COMPOSITES. FINE THREADS FOR HARDWOOD APPLICATIONS. #6 X 3/4" FINE THREAD SCREWS DESIGNED SPECIFICALLY FOR USE WITH 1/2" THICK STOCK. AVAILABLE IN SINGLE STYLE PACKAGES OR A KIT CONTAINING 150EA 1" FINE THREAD,PAN HEAD, 1" COARSE THREAD, PAN HEAD, 1-1/4" FINE THREAD, RWH, 1-1/4" COARSE THREAD, RWH, AND 75 EA 2-1/2" BLUE KOTE (EXTERIOR) RWH. IMPORTED REFER TO THE SELECTION CHART BELOW TO CHOOSE THE BEST SCREW FOR YOUR APPLICATION
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® BLACK OXIDE ASSEMBLY SCREWS #2 SQUARE
|
| #8x1 Fl-sq Q$ Assembly Screws-black
...plus other(s)
|
QUICK$CREWS® GENERAL PURPOSE ASSEMBLY SCREWS FEATURE DEEP,WIDE THREADS A SMOOTH COUNTERSINK ON THE HEAD AND A BLACK OXIDE FINISH:
QUICKSCREW™ COARSE THREADS PROVIDE EASY STARTS AND QUICK PENETRATION IN COMPOSITES AND TOUGH MATERIALS. #2 SQUARE DRIVE(R2) GIVES MORE POSITIVE DRIVE AND REDUCED CAMOUT. #9 SCREWS HAVE #8 HEAD. SOLD IN BAGS OF 100, BOXES OF 500 OR 1,000 AND BULK QUANTITY CASES. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® WOODEN KNOB MOUNTING SCREWS
|
| #12x1-1/2 Rwh Ph+sl Knob Screw Zp
...plus other(s)
|
QUICKSCREWS® ZINC-FINISH KNOBSCREWS™ ARE LONG ENOUGH TO INSTALL WOODEN KNOBS ON THICKER DOORS OR DRAWER FRONTS::
FOR USE ON WOODEN KNOBS WITHOUT THREADED INSERTS. COARSE, TYPE B THREAD. ROUND WASHER HEAD. PHILLIPS/SLOTTED COMBO DRIVE. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
LOG HOME FASTENERS QUICKLY PENETRATE AND OFFER INCREASED STRIP OUT RESISTANCE AND HIGH PULL OUT STRENGTH
|
| 10" Hd Log Home Screws
...plus other(s)
|
|
|
|
Fasteners - Wood Screws
|
LOG HOME INSULATION PANEL FASTENERS CAN BE USED WITHOUT PLATES
|
| 10" Insul. Panel Screws
...plus other(s)
|
|
|
|
Fasteners - Wood Screws
|
WHEN JOINING LOG HOME TIMBERS YOU CAN COUNT ON THE WT FASTENING SYSTEM
|
| 1/4"x6.30" Dbl Thrd Timber Screw
...plus other(s)
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® DRAWER FRONT ADJUSTING SCREWS-COMBO DRIVE
|
| #8x1 Rwh-co Q$ Dfa Scrw T17 Zp
...plus other(s)
|
QUICKSCREWS® DRAWER FRONT ADJUSTING SCREWS FEATURE LARGE ROUND WASHER HEADS AND TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING:
AVAILABLE BY THE BAG, BOX OR CARTON #8, ZINC PLATED SCREWS.QUICK$CREW®COARSE THREAD FOR OPTIMAL HOLDING. SMOOTH SHANK FOR BETTER DRAW DOWN. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® COMPACT HINGE MOUNTING SCREWS
|
| #8x5/8 Pn-sq Q$ Hng Screw T17 Zp
...plus other(s)
|
AVAILABLE BY THE BAG, BOX OR CASE IN 5/8" TO 3/4" LENGTHS, QUICKSCREWS® #8 COMPACT HINGE SCREWS FEATURE A ZINC FINISH AND #2 SQUARE DRIVE:
PAN HEADS WITH TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICKSCREW® THREAD FOR OPTIMAL HOLDING. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #8 X 1-1/4 INCH FLAT HEAD ZINC PLATED SCREWS #2 SQUARE DRIVE
|
| #8x1 Fl-sq Q$ Assy T17 Zp Nibs
...plus other(s)
|
QUICKSCREWS® FLAT HEAD SCREWS FEATURE SELF COUNTERSINKING NIBS AND #2 SQUARE DRIVE. AVAILABLE BY THE BAG, BOX OR CARTON IN 1" TO 4" LENGTHS, QUICKSCREWS® #8, #9 AND #10 ZINC ASSEMBLY SCREWS FEATURE:
TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® COARSE THREAD FOR OPTIMAL HOLDING. SMOOTH SHANKS FOR BETTER DRAWDOWN. FLAT HEADS (#9 SCREWS HAVE #8 HEADS) WITH NIBS FOR SELF COUNTERSINKING. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #6 DRAWER SLIDE MOUNTING SCREWS #1 SQUARE DRIVE
|
| #6x1/2 Fl-1sq Slide Screw T17 Zp
...plus other(s)
|
QUICKSCREWS® FLAT HEAD #6 DRAWER SLIDE SCREWS HAVE ZINC PLATING FOR DURABILITY. AVAILABLE BY THE BAG, BOX OR CARTON IN 1/2" TO 1-1/2" LENGTHS:
TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. #1 SQUARE RECESS FOR NON-SLIP DRIVINGQUICK$CREW® COARSE THREAD FOR OPTIMAL HOLDING. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #8 X 1-1/2" BLACK OXIDE ASSEMBLY SCREWS"
|
| #8x1 Fl-sq Q$ Assy T17 Blk Nibs
...plus other(s)
|
QUICKSCREWS®BLACK ASSEMBLY SCREWS FEATURE SELF DRILLING AUGER POINTS AND SELF COUNTERSINKING NIBS:
AVAILABLE IN 1" TO 4" LENGTHSTYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® COARSE THREAD DRIVES QUICKLY AND CLEANLY FOR OPTIMAL HOLDING. SMOOTH SHANKS FOR BETTER DRAWDOWN.#9 SCREWS HAVE #8 HEAD SIZEIMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #6 FLAT HEAD NICKEL PLATED HINGE SCREWS #2 SQUARE
|
| #6x1/2 Fl-sq Q$ Hng Screw T17 Np
...plus other(s)
|
QUICKSCREWS® FLAT HEAD NICKEL PLATED HINGE AND HARDWARE SCREWS FEATURE SELF DRILLING AUGER POINT AND #2 SQUARE DRIVE:
AVAILABLE BY THE BAG, BOX OR CARTON IN 1/2" TO 3/4" LENGTHS FLAT HEADS AND TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® COARSE THREAD FOR OPTIMAL HOLDING. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #6 FLAT HEAD ZINC PLATED HINGE SCREWS #2 SQUARE
|
| #6x1/2 Fl-sq Q$ Hdwe Screw T17 Zp
...plus other(s)
|
QUICKSCREWS® FLAT HEAD ZINC PLATED HINGE AND HARDWARE SCREWS FEATURE SELF DRILLING AUGER POINT AND #2 SQUARE DRIVE:
AVAILABLE BY THE BAG, BOX OR CARTON IN 1/2" TO 3/4" LENGTHS FLAT HEADS AND TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® COARSE THREAD FOR OPTIMAL HOLDING. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® SELF DRILLING INSTALLATION SCREWS FOR METAL STUDS
|
| #8x2-1/2 Rwh-sq Ft Instal Sds Zp
...plus other(s)
|
QUICKSCREWS® SELF DRILLING INSTALLATION SCREWS FEATURE WASHER HEADS AND FINE THREADS FOR STRONG ATTACHMENT IN METAL WALL STUDS:
AVAILABLE BY THE BAG, BOX OR CARTON IN 2-1/2" LENGTHS SELF DRILLING POINTS FOR QUICKER PENETRATION. SHEET METAL THREADS FOR OPTIMAL HOLDING. FOR COLOR MATCHING, 144-224, 144-227, 144-230 AND 144-233 HAVE WHITE PAINTED HEADS. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® ROUND WASHER HEAD ASSEMBLY SCREWS
|
| #8x1 Rwh-sq Q$ Assy Screw T17 Zp
...plus other(s)
|
QUICKSCREWS® #8 ZINC PLATED PAN HEAD SCREWS FOR COMPACT HINGE INSTALLATION FEATURE SELF DRILLING AUGER POINTS AND #2 SQUARE DRIVE:
AVAILABLE BY THE BAG, BOX OR CARTON IN 1" TO 3" LENGTHSTYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® COARSE THREAD FOR OPTIMAL HOLDING. SMOOTH SHANK FOR BETTER DRAW DOWN. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICK$CREWS® #8 COMPACT HINGE SCREWS
|
| #8x3/4 Pn-sq Q$ Hng Screw T17 Zp
...plus other(s)
|
AVAILABLE BY THE BAG, BOX OR CASE IN 5/8" TO 3/4" LENGTHS, QUICK$CREWS® #8 COMPACT HINGE SCREWS COME WITH A ZINC FINISH AND FEATURE:
PAN HEADS WITH TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® THREAD FOR OPTIMAL HOLDING. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® #8 TRUSS HEAD HINGE AND HARDWARE SCREWS
|
| #8x5/8 Tr-sq Q$ Hdwe Screw T17 Zp
...plus other(s)
|
QUICKSCREWS® ZINC PLATED #8 TRUSS HEAD HINGE AND HARDWARE SCREWS FEATURE SELF DRILLING AUGER POINTS AND #2 SQUARE DRIVE:
AVAILABLE BY THE BAG, BOX OR CASE IN 5/8" TO 3/4" LENGTHSTRUSS HEADS WITH TYPE 17 AUGER POINTS FOR REDUCED TORQUE, QUICKER PENETRATION AND REDUCED SPLITTING. QUICK$CREW® COARSE THREAD FOR OPTIMAL HOLDING. POSITIVE #2 SQUARE DRIVE. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® POCKET HOLE SCREWS
|
| #6x1-1/4 Pn-sq Ft Pocket T17 Pl/lb
...plus other(s)
|
QUICKSCREWS® POCKET HOLE SCREWS LET YOU CHOOSE FROM SIX THREAD STYLES TO HANDLE FACE FRAME JOINERY IN ALL KINDS OF WOOD. POCKET HOLE SCREWS FEATURE A MODIFIED PAN HEAD DESIGN THAT INCREASES STRENGTH AND PREVENTS SNAPPING WHILE AUGER POINTS AND DRI-LUBE PROVIDE FOR QUICKER PENETRATION:
#2 SQUARE DRIVE UNLESS OTHERWISE SPECIFIED. BUY IN BULK AND SAVE!IMPORTED
|
|
|
|
Fasteners - Wood Screws
|
DESIGNED BY A CABINET MAKER, ZINC PLATED POWERHEAD SCREWS GIVE YOU OPTIONS
|
| Powerhead Screws #10x2-1/2"
...plus other(s)
|
PATENT PENDING FASTCAP™ POWERHEAD CABINET INSTALLATION SCREWS HAVE BEEN ENGINEERED WITH NIBS TO MAKE COUNTERSINKING EASIER:
IDEAL FOR USE WITH AN IMPACT DRIVER, #8 SCREWS HAVE 9/16" DIA. HEADS THAT WON'T PULL THROUGH. #2 SQUARE DRIVES, TYPE 17 POINTS - 2-1/2" OR 3" LONG.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
FASTCAP™ COVER CAPS - 922-006.
|
|
|
|
Fasteners - Wood Screws
|
NEW KREG WEATHER RESISTANT SELF TAPPING SCREWS
|
| #8x1-1/4" Coarse Rwh Blue-kote
...plus other(s)
|
WITH KREG WEATHER RESISTANT SELF TAPPING SCREWS YOU GET EXCEPTIONAL RUST-RESISTANT PROPERTIES PLUS THE ULTIMATE IN HOLDING POWER:
IDEAL FOR POCKET SCREW APPLICATIONS, BLUE-KOTE™ WEATHER RESISTANT SCREWS FEATURE THREE SPECIAL ANTI-CORROSION LAYERS THAT RESIST RUST 400% BETTER THAN OLDER KREG ZINC PLATED SCREWS. STAINLESS STEEL SCREWS ARE DESIGNED FOR MARITIME USE, EXCESSIVE EXPOSURE TO SALT WATER AND CORROSIVE ENVIRONMENTS SUCH AS ACQ TREATED LUMBER. THESE MAXI-LOC™ WASHER HEAD SCREWS HAVE #2 SQUARE DRIVES AND ARE AVAILABLE IN BOXES OF 50, 100, 250 AND 1,000. B>BLUE-KOTE™ WEATHER RESISTANT SCREWS ARE ALSO AVAILABLE IN A 450 PC KIT WHICH INCLUDES 100 EA 1-1/4" COARSE THREAD, 100 EA 1-1/2" COARSE THREAD, 100 EA 2" COARSE THREAD, AND 150EA 2-1/2" COARSE THREAD SCREWS. IMPORTED REFER TO THE SELECTION CHART BELOW TO CHOOSE THE BEST SCREW FOR YOUR APPLICATION
|
|
|
|
Fasteners - Wood Screws
|
KREG POCKETHOLE SCREW KITS OFFER THE CONVENIENCE OF ASSORTED SIZES IN A SINGLE PORTABLE CONTAINER
|
| Sk03 Pocket Hole Screw Kit
...plus other(s)
|
|
ASSORTED STYLES AND SIZES ALLOW YOU TO MATCH THE BEST FASTENER TO YOUR POCKET HOLE APPLICATIONS. THE SK03 KIT CONTAINS 675 FASTENERS: 150 EACH OF #7X1 FINE THREAD, PAN HEAD SCREWS, #8X1 COARSE THREAD, PAN HEAD SCREWS, #7X1-1/4 FINE THREAD, PAN HEAD SCREWS, #8X1-1/4 COARSE THREAD, MAXI-LOC™ ROUND WASHER HEAD SCREWS, AND 75 #8X2-1/2MAXI-LOC™BLUE-KOTE™ ROUND WASHER HEAD SCREWS. THE SK03B KIT CONTAINS 450 ASSORTED BLUE-KOTE™ WEATHER RESISTANT SCREWS: 100EA #8X1-1/4 ROUND, WASHER HEAD SCREWS, 100EA #8X1-1/2 ROUND WASHER HEAD SCREWS, 100EA #8X2 ROUND WASHER HEAD SCREWS AND 150EA #8X2-1/2 ROUND WASHER HEAD SCREWS. BOTH KITS COME IN STURDY PLASTIC DIVIDED STORAGE CASES WHICH ARE EASY TO CARRY, CLOSE SECURELY AND STAND UP FOR STORAGE ON A SHELF. IMPORTED.
|
|
|
|
Fasteners - Wood Screws
|
STAR DRIVE FLAT HEAD ASSEMBLY SCREWS
|
| #8x1" Fh Star Drive Screw T20
...plus other(s)
|
INCREASED BIT LIFE, BETTER BATTERY LIFE FOR CORDLESS DRIVERS AND VIRTUALLY NO TWIST OFF MAKE THESE THE IDEAL GENERAL PURPOSE FLAT HEAD FASTENERS. THE SIX-LOBED STAR DRIVE RECESS HANDLES MORE DRIVING TORQUE THAN PHILLIPS OR SQUARE DRIVE REDUCING CAMOUT DAMAGE TO FASTENERS AND DRIVER BITS.
INTERIOR GRADE MULTIPURPOSE SCREWS WORK EQUALLY WELL IN HARD AND SOFT WOODS, COMPOSITES AND OTHER TOUGH MATERIALS. HEAT TREATED, HARDENED STEEL SCREWS HAVE YELLOW ZINC COATING TO RESIST CORROSION. DEEP, WIDE, SHARP THREADS AND PROPER THREAD ANGLE LET SCREWS CUT CLEANLY WITHOUT CRUMBLING OR CRUSHING OF WOOD FIBERS. TYPE 17 AUGER POINT ALLOWS SCREWS TO START QUICKLY WITHOUT A PILOT HOLE IN MOST MATERIALS. TRUE FLAT HEAD WITH 16 CUTTING NIBS SELF COUNTERSINKS EVEN IN HARD OR BRITTLE MATERIALS AND PREVENTS SPINOUT. KNURLED SHOULDERS (ON SCREWS OVER 1-1/2" IN LENGTH) REAM HOLE IN BOARD BEING FASTENED REDUCING DRAG ON SHANK AND DRIVING TOOL. AVAILABLE IN SIZES FROM #8X1" TO #10X6" TO ACCOMMODATE A WIDE RANGE OF FASTENING APPLICATIONS.
FOR OTHER STAR DRIVE STYLES:
154-400 - POCKET HOLE SCREWS. 154-424 - FINISH SCREWS. 154-448 - CABINET INSTALLATION SCREWS. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
INSERT DRIVER BITS - 154-028."
|
|
|
|
Fasteners - Wood Screws
|
STAR DRIVE POCKET HOLE SCREWS
|
| #7x1-1/4" Star Crse Pockt Hole T20
...plus other(s)
|
STAR DRIVE POCKET HOLE SCREWS CAN HANDLE HIGH TORQUE DRIVING MAKING FACE FRAME JOINTS SOLID AND SECURE. ROUND WASHER HEADS SEAT FIRMLY IN POCKET HOLE RECESSES FOR STRONG JOINTS.
HEAT TREATED, HARDENED STEEL SCREWS HAVE A DRY LUBED BRONZE FINISH. SELF STARTING TYPE 17 AUGER POINT. COARSE THREAD STYLES FOR SOFT WOODS AND COMPOSITES. FINE THREAD STYLES FOR USE IN HARD OR BRITTLE WOODS. AVAILABLE IN #7X1-1/4" OR #7X1-1/2" IN BOXES OF 100 OR 1000. USE T-20 DRIVER BIT.
FOR OTHER STAR DRIVE STYLES:
154-292 - FLAT HEAD ALL PURPOSE SCREWS. 154-424 - FINISH SCREWS. 154-448 - CABINET INSTALLATION SCREWS. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
INSERT DRIVER BITS - 154-028."
|
|
|
|
Fasteners - Wood Screws
|
STAR DRIVE FINISH SCREWS
|
| #7x1-5/8"star Finish Screw T10
...plus other(s)
|
STAR DRIVE FINISH SCREWS HAVE A SELF COUNTERSINKING HEAD AND THE SIX-LOBED STAR RECESS HANDLES MORE TORQUE AND GIVES BETTER BIT LIFE THAN PHILLIPS OR SQUARE DRIVES:
DEEP, WIDE, SHARP THREADS SET AT THE PROPER ANGLE LET SCREWS CUT CLEANLY WITHOUT CRUMBLING OR CRUSHING WOOD FIBERS REDUCING SPLITTING AND CRACKING. TYPE 17 AUGER POINT STARTS SCREWS QUICKLY WITHOUT THE NEED FOR A PILOT HOLE IN MOST MATERIALS. KNURLED SHOULDERS REAM HOLE IN BOARD BEING FASTENED REDUCING DRAG ON SHANK AND DRIVING TOOL. HEAD DIAMETER IS .204 AND FEATURES NIBS THAT ALLOW THE SCREWS TO SELF-COUNTERSINK EVEN IN HARD OR BRITTLE MATERIALS. HOLES ARE EASILY COVERED BY COMMON WOOD FILLERS. NO NEED FOR PLUGS. #7 SHANK SIZE AND LENGTHS FROM 1-5/8" TO 3". YELLOW ZINC COATING PROVIDES A DURABLE, TARNISH RESISTANT FINISH. USE T10 DRIVER.
FOR OTHER STAR DRIVE STYLES:
154-292 - FLAT HEAD ALL PURPOSE SCREWS. 154-400 - POCKET HOLE SCREWS. 154-448 - CABINET INSTALLATION SCREWS. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
INSERT DRIVER BITS - 154-028."
|
|
|
|
Fasteners - Wood Screws
|
STAR DRIVE CABINET INSTALLATION SCREWS
|
| #10x2-1/2" Star Cabinet Screw T25
...plus other(s)
|
STAR DRIVE CABINET INSTALLATION SCREWS FEATURE A LARGE WASHER HEAD WITH A SIX LOBED RECESS DRIVE WHICH HANDLES MORE TORQUE THAN PHILLIPS OR SQUARE DRIVE SCREWS.STAR DRIVE OFFERS A MORE POSITIVE CONNECTION BETWEEN DRIVER BIT AND SCREW HEAD REDUCING CAMOUT AND INCREASING THE EFFECTIVE BATTERY LIFE OF CORDLESS DRIVERS. INTERIOR GRADE MULTIPURPOSE SCREWS WORK EQUALLY WELL IN HARD AND SOFT WOODS, COMPOSITES AND OTHER TOUGH MATERIALS.
HEAT TREATED, HARDENED STEEL SCREWS HAVE YELLOW ZINC COATING TO RESIST CORROSION. DEEP, WIDE, SHARP THREADS AND PROPER THREAD ANGLE LET SCREWS CUT CLEANLY WITHOUT CRUMBLING OR CRUSHING OF WOOD FIBERS. TYPE 17 AUGER POINT ALLOWS SCREWS TO START QUICKLY WITHOUT A PILOT HOLE IN MOST MATERIALS. LARGE ROUND WASHER HEAD GIVES MAXIMUM HOLDING POWER IN HEAVY LOAD APPLICATIONS. SMOOTH SHANK ABOVE THREADS. AVAILABLE IN #10X2-1/2" OR #10X3" IN PACKAGES OF 50 OR 250./
FOR OTHER STAR DRIVE STYLES:
154-292 - FLAT HEAD ALL PURPOSE SCREWS. 154-400 - POCKET HOLE SCREWS. 154-424 - FINISH SCREWS. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
INSERT DRIVER BITS - 154-028."
|
|
|
|
Fasteners - Wood Screws
|
#8 X 1-1/4" BLACK OXIDE FLAT HEAD WOOD SCREWS #2 SQUARE DRIVE"
|
| #6x1-1/8 Bu-ph Drywall Screw Blk
...plus other(s)
|
|
|
|
Fasteners - Wood Screws
|
#8 X 1-1/4" BLACK OXIDE FLAT HEAD WOOD SCREWS #2 SQUARE DRIVE"
|
| #10 X 4 Fl-sq Lo-root Screws-plain
...plus other(s)
|
THESE FLAT HEAD SCREWS HAVE THINNER SHANKS, DEEPER THREADS AND #2 SQUARE RECESS FOR MORE POSITIVE DRIVE THAN OTHER HEAD STYLES:
LO-ROOT THREAD DESIGN FEATURES THINNER SHANKS AND DEEPER THREADS FOR MAXIMUM HOLDING POWER IN SOLID WOODS AND COMPOSITES. BLACK OXIDE FINISH RESISTS CORROSION. DRY-LUBE PROVIDES EASIER DRIVING. 1 LB. PACKAGE QUANTITIES ARE APPROXIMATE. BUY BY THE CASE AND SAVE!"
|
|
|
|
Fasteners - Wood Screws
|
RECEX COMBO DRIVE WOOD SCREWS #8 X 1-1/4"
|
| #6x3/4" Fh-recex Screws-plain
...plus other(s)
|
HEAT TREATED STEEL WITH SHARP THREAD ANGLES, RECEX® SCREWS CAN BE INSTALLED USING YOUR CHOICE OF DRIVERS:
SHARP POINTS AND RAPID RISE FOR FULL THREAD PENETRATION AFTER THE FIRST REVOLUTION. THREAD SURFACES ARE NEARLY PERPENDICULAR TO THE SCREW AXIS TO GIVE THE GREATEST PULLOUT RESISTANCE.."
|
|
|
|
Fasteners - Wood Screws
|
FLAT HEAD HARDWARE MOUNTING SCREWS #2 PHILLIPS DRIVE
|
| #4x5/8" Fl-ph Hdwe Screw Zp
...plus other(s)
|
SMALL PHILLIPS FLAT HEAD SCREWS COME IN TWO SIZES, THREE LENGTHS IN ANTIQUE BRASS OR ZINC PLATED FINISH.
#2 PHILLIPS DRIVE.SOLD IN BAGS OF 100."
|
|
|
|
Fasteners - Wood Screws
|
POLYMER COATED PHILLIPS DRIVE EXTERIOR WOOD SCREWS
|
| #8x2" Ext. Deck Screw
...plus other(s)
|
POLYMER COATED SCREWS RESIST RUST AND CORROSION IN EXTERIOR DECK, GATE, FENCE AND FURNITURE PROJECTS:
#2 PHILLIPS DRIVE.807-086 - #8 X 2" EXTERIOR DECK SCREW. 807-093 - #8 X 2-1/4" EXTERIOR DECK SCREW. 807-097 - #8 X 3" EXTERIOR DECK SCREW. 807-079 - #8 X 1-3/4" EXTERIOR DECK SCREW.SOLD IN PACKAGES OF 100.
LIMITED TO QUANTITIES ON HAND"
|
|
|
|
Fasteners - Wood Screws
|
#6 TRIM HEAD WOOD SCREWS
|
| #6x1-5/8 Trim-1sq Finish Screw Blk
...plus other(s)
|
THE NARROW 0.215" DIA. HEADS ON THESE #6 BLACK FINISH SCREWS ALLOW THEM TO BE DRILLED HOME WITHOUT COUNTERSINKING:
SIMPLY FILL THE REMAINING HOLE WITH WOOD PUTTY, SAND AND FINISH. INSTALLATION REQUIRES A #1 SQUARE HEAD DRIVER. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
POZI DRIVE SCREWS FOR EUROPEAN HARDWARE
|
| 6.3mmx11.5mm Fl-pz Euro Screws Np
...plus other(s)
|
NICKEL-PLATED, POZI DRIVE HEAD, EURO HARDWARE SCREWS ARE THE FASTENER OF CHOICE FOR THE 32MM SYSTEM:
6.3MM DIAMETER FITS STANDARD 5MM BORE. FLAT HEAD DESIGN FITS INTO MOST EURO HARDWARE - DEEP THREADS OFFER INCREASED HOLDING POWER. FOUR LENGTHS TO CHOOSE FROM. BAGS OF 100 OR BOXES OF 1,000.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#2 POZI DRIVE - 112-028."
|
|
|
|
Fasteners - Wood Screws
|
PAN HEAD PHILLIPS DRIVE SCREWS
|
| #6x1/2 Pn-ph Screw-zp
...plus other(s)
|
THESE PAN HEAD PHILLIPS DRIVE SCREWS COME IN ZINC OR ANTIQUE ENGLISH FINISHES:
ZINC FINISH SCREWS ARE 1/2" LONG; ANTIQUE ENGLISH FINISH SCREWS ARE 3/4" LONG. BOTH COME IN TWO DIFFERENT SIZES. SOLD IN PACKAGES OF 100."
|
|
|
|
Fasteners - Wood Screws
|
#8 X 1/2" SELF DRILLING HEX HEAD SHEET METAL SCREWS"
|
| #8x1/2" Tek Sheet Metal Screws
...plus other(s)
|
#8 X 1/2" SELF-DRILLING SHEET METAL SCREWS HAVE A 1/4" HEX HEAD FOR EASY DRIVING AND ARE A GOOD CHOICE FOR JOINING DUST COLLECTION SYSTEM COMPONENTS:
SOLD IN PACKAGES OF 100. OPTIONAL MAGNETIC NUT SETTER SIMPLIFIES INSTALLATION. IMPORTED.
NOTE: WHEN USING ANY DUST COLLECTION SYSTEM, ALWAYS ENSURE PROPER ELECTRICAL GROUNDING. IF IN DOUBT, CONTACT AN ELECTRICIAN."
|
|
|
|
Fasteners - Wood Screws
|
CLEARANCE PRICED HETTICH FACE FRAME HINGES OPEN TO 120°
|
| #6x5/8 Fl-ph Hinge Screw-ab
...plus other(s)
|
|
|
|
Fasteners - Wood Screws
|
QUICK$CREWS® #6 FLAT HEAD SCREWS ARE THE IDEAL FASTENER FOR EURO HINGES
|
| #6x5/8"fl-ph Q$ Np Hinge Screw
...plus other(s)
|
NICKEL PLATED, 5/8" QUICK$CREWS® #6 GENERAL PURPOSE WOOD SCREWS FEATURE:
SHARP POINT FOR QUICK PENETRATION AND REDUCED SPLITTING. QUICK$CREW COARSE THREADS GIVE OPTIMAL HOLDING. FLAT HEAD WITH #2 PHILLIPS DRIVE. IDEAL FASTENER FOR EUROPEAN STYLE CONCEALED HINGES AND BASEPLATES. BUY IN BULK QUANTITIES AND SAVE!
|
|
|
|
Advanced Search Tools
Browse
