|
|
|
Sawblades - Bandsaw
|
BANDSAW BLADES
|
| 1/2"x44-7/8"x.020" 14st Bimetal Portabnd
...plus other(s)
|
THE BI-METAL M-42 USED IN A&H ABRASIVES™ REPLACEMENT PORTA-BAND® BLADES IS IDEAL FOR THE PRODUCTION CUTTING OF ABRASIVE, EXOTIC ALLOYS, TOOL STEEL OR STAINLESS STEEL:
BI-METAL MATRIX II HIGH SPEED STEEL CUTTING EDGE MAKES THE BEST ALL AROUND GENERAL PURPOSE BLADE FOR ALL TYPES OF MATERIAL. WILL FIT BLACK & DECKER®, GREENLEE®, MILWAUKEE®, PORTER-CABLE®, ROCKWELL®, SKIL® AND UNITEC® PORTABLE BANDSAWS THAT REQUIRE 0.020" THICK BLADES. USA AND IMPORTED.
|
|
|
|
Sawblades - Bandsaw
|
BANDSAW BLADES
|
| 1/4"x71-3/4"x.025" 6h Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
BANDSAW BLADES
|
| 1/4"x80"x.025" 6h Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
BANDSAW BLADES
|
| 1/4"x95"x.025" 6h Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
BANDSAW BLADES
|
| 1/4"x105"x.025" 6h Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
BANDSAW BLADES
|
| 3/16"x133"x.025" 4s Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
WOODTEK 18" BAND SAW
|
| 1/4"x144"x.025" 6h Flex Bndsaw Bld
...plus other(s)
|
WITH TWO SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, WOODTEK® BAND SAWS TRACK STRAIGHT AND RUN COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOTS AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN AND A QUICK RELEASE BLADE LATCH. FOOT BRAKES ARE LARGE AND EASY TO REACH, SO YOU CAN QUICKLY STOP THE BLADE. SAWBLADE, TIRE, MITER GAUGE, RIP FENCE, GUIDE RAIL, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. 4" DIA. DUST COLLECTION PORT AT THE LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WOODTEK® 18" BAND SAW: MOTOR - 2 HP, 230V, 9.6A, 1PH, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 3,000 FPM. BLADE SIZE - 144", 1/4" TO 1" WIDE (17-1/2" DIA. WHEEL). HEIGHT CAPACITY - 10". DEPTH CAPACITY - 17-1/2". TABLE SIZE - 25-5/8" X 18-1/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 72-3/4"H X 31-1/2"W X 28-1/2"D. SHIPPING WEIGHT - 558 LBS.
WOODTEK® 20" BAND SAW: MOTOR - 2 HP, 230V, 12A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,000 FPM. BLADE SIZE - 155", 3/8" TO 1" WIDE (20" DIA. WHEEL). HEIGHT CAPACITY - 12-7/16". DEPTH CAPACITY - 19-3/16". TABLE SIZE - 23" X 20-1/2"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 73-3/4"H X 34"W X 26"D. SHIPPING WEIGHT - 593 LBS.
WOODTEK® 24" BAND SAW: MOTOR - 5 HP, 230V, 25A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,600 FPM. BLADE SIZE - 177", 3/8" TO 1" WIDE (23-1/4" DIA. WHEEL). HEIGHT CAPACITY - 15-1/2". DEPTH CAPACITY - 23-1/4". TABLE SIZE - 29" X 22-3/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 80"H X 36"W X 28"D. SHIPPING WEIGHT - 753 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Sawblades - Bandsaw
|
WOODTEK 4 SPEED WOOD OR METAL BAND SAW
|
| 1/4"x111"x.025" 14std Bimetal Bndsaw Bld
...plus other(s)
|
WOODTEK® 15" OR 18" FOUR SPEED METAL/WOOD CUTTING BANDSAWS WILL EASILY HANDLE FERROUS AND NON-FERROUS METALS AS WELL AS HARD AND SOFT WOODS - CLUTCH LEVER SWITCHES BETWEEN OPERATING MODES:
80 FPM (STEEL AND STEEL ALLOYS), 150 FPM (CAST IRON AND BRONZE), 200 FPM (ALUMINUM, BRASS AND COPPER) OR 2,800 FPM (WOODCUTTING). UPPER AND LOWER GUIDE PINS PROVIDE SAWBLADE SIDE SUPPORT THRUST BEARINGS SUPPORT REAR. SEPARATE BLADE TENSIONING AND BLADE TRACKING CONTROLS. HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOT AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. 14TPI METAL CUTTING AND 6TPI WOOD CUTTING SAWBLADES, TIRES, MITER GAUGE, RIP FENCE WITH KNOB, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
130-367 15" BANDSAW:
MOTOR - 1HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 111", 3/16" TO 3/4" WIDE (15" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 8-3/4". DEPTH CAPACITY - 14-5/8". TABLE SIZE - 15" X 15"; TILTS 5°L AND 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 68"H X 27"W X 22"D. NET WEIGHT - 302 LBS. SHIPPING WEIGHT - 353 LBS.
130-370 18" BANDSAW:
MOTOR - 1-1/2HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 133", 3/16" TO 1" WIDE (18" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-3/4". DEPTH CAPACITY - 17-3/4". TABLE SIZE - 18" X 19"; TILTS 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 75"H X 33"W X 24"D. NET WEIGHT - 344 LBS. SHIPPING WEIGHT - 400 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Sawblades - Bandsaw
|
WOODTEK 10" BAND SAW
|
| 3/8"x67"x.025" 4s Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
STARRETT® FLEXBACK BANDSAW BLADES
|
| 1/8"x.025x100ft 18s Flexback Coil
...plus other(s)
|
MANUFACTURED FROM CARBON STEEL, STARRETT FLEXBACK BANDSAW COILS HAVE TEETH THAT HAVE BEEN HEAT TREATED TO RETAIN THEIR SHARP EDGE. MANUFACTURED FROM CARBON STEEL, STARRETT® FLEXBACK BANDSAW COILS HAVE TEETH THAT HAVE BEEN HEAT TREATED TO RETAIN THEIR SHARP EDGE:
RECOMMENDED FOR GENERAL PURPOSE CUTTING OF EASY-TO-MACHINE FERROUS METAL, AS WELL AS WOOD AND NON-FERROUS METAL CUTTING, WHERE HIGH BLADE SPEEDS (1,000-6,000 FPM) ARE USED. COILS ARE 100 FEET LONG.
|
|
|
|
Sawblades - Bandsaw
|
POWERMATIC 1791800 PM1800 18" BAND SAW
|
| 1/4"x160"x.025" 6h Flex Bndsaw Bld
...plus other(s)
|
|
BALL BEARING BLADE GUIDES WITH MICRO-ADJUSTMENT FOR GREAT BLADE CONTROL SPECIAL GROOVED THRUST BEARING STABILIZES SMALLER BLADES MASSIVE CAST IRON CONSTRUCTION DAMPENS VIBRATION FOR SMOOTH OPERATION DYNAMICALLY BALANCED CAST IRON WHEELS HAVE FLYWHEEL MOMENTUM 2 BLADE SPEEDS TO HANDLE A VARIETY OF WORK, 1,800/4,200 SFPM 24" X 24" CAST IRON TABLE WITH 3/8" X " T-BOTTOM MITER SLOT HEAVY DUTY T-SQUARE STYLE FENCE WITH ADJUSTABLE EXTRUDED ALUMINUM CHEEK INCLUDES PRECISION MITER GAUGE 2" DIAMETER SOLID STEEL RE-SAW POST MULTI-STEP BLADE TENSION RELEASE LEVER IS QUICK AND EASY TO USE 4" DUST PORT CONVENIENTLY LOCATED FOOT BRAKE 5HP MOTOR IN SINGLE OR THREE PHASE, 3-PHASE PRE-WIRED 230V
|
|
|
|
Sawblades - Bandsaw
|
DELTA® 20" STEEL FRAME BANDSAW MEETS PRODUCTION SHOP REQUIREMENTS
|
| 3/8"x 76"x.025" 4h Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
TOUGHER BLADES SPECIFICALLY FOR THREE WHEEL BANDSAWS
|
| 3/8"x71-3/4"x.014"14std Flex Bndsaw Bld
...plus other(s)
|
A&H ABRASIVES™ BLADES FOR THREE WHEEL BANDSAWS ARE MADE FROM THINNER, TOUGHER AND HEAT TREATED STEEL TO WITHSTAND SHARP FLEXING. BLADES HAVE BEEN SPECIALLY DESIGNED TO RESIST BLADE FATIGUE AND BREAKAGE ON 10" DIA. AND SMALLER BANDSAW WHEELS:
CHOOSE FROM THREE LENGTHS, THREE WIDTHS AND STANDARD OR SKIP TEETH. PAY LESS WHEN YOU ORDER THREE OR MORE BLADES AT THE SAME TIME! USA.
|
|
|
|
Sawblades - Bandsaw
|
HITACHI CB75F 14-1/2" BANDSAW
|
| 1"x110-3/4"x.023" 2h Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
STARRETT®/BAHCO®/MILFORD® REPLACEMENT BAND SAW BLADES
|
| 3/16"x113"x.025" 4s Flex Bndsaw Bld
...plus other(s)
|
WOODWORKER'S SUPPLY® QUICK REFERENCE BAND SAW BLADE CHART LETS YOU MATCH A BLADE TYPE WITH YOUR CUTTING NEEDS:
ALL BLADES HAVE A RAKER SET AS SHOWN IN FIGURE A. THE RAKER TOOTH ACTS AS A RUDDER TO KEEP YOUR CUT TRUE AND IT CLEANS AS IT CUTS TO PREVENT CLOGGING AND BURNING. TOOTH CONFIGURATIONS ARE SHOWN IN FIGURE B. STANDARD TEETH HAVE A 0° ANGLE AND ARE USED FOR GENERAL PURPOSE SAWING. THEY GIVE A SMOOTH CUT AND ARE RECOMMENDED FOR INTRICATE CURVES AND STRAIGHT CUT OFF WORK. SKIP TEETH HAVE A 0° ANGLE WITH SHALLOW GULLETS THAT PROVIDE AMPLE CHIP REMOVAL. LARGE GULLETS RESIST CLOGGING. HOOK TEETH HAVE A 10° ANGLE THAT BITES MORE AGGRESSIVELY INTO THE MATERIAL, REQUIRING LESS FEED PRESSURE. SAW BLADE LENGTHS RANGE FROM 52-3/4" TO 177".
|
|
|
Click for More Info
|
Sawblades - Bandsaw
|
STARRETT® FLEXBACK BANDSAW BLADES
|
| 1/8"x57"x.025"14std Flex Bndsaw Bld
...plus other(s)
|
WOODWORKER'S SUPPLY STOCKS A COMPLETE INVENTORY OF CARBON STEEL, BI-METAL AND CARBIDE TIPPED BANDSAW BLADES TO MEET ALL APPLICATIONS AND MOST BANDSAW BRANDS. TOOTH DESIGNS INCLUDE STANDARD, SKIP AND HOOK (1/2" WIDE CARBIDE TIPPED BLADES HAVE 4 TPI; 1/2" WIDE BI-METAL 3 TPI; 3/8" WIDE X 93-1/2" LONG AND 105" LONG BI-METAL, 4 TPI):
|
|
|
|
Sawblades - Bandsaw
|
STARRETT® FLEXBACK BANDSAW BLADES
|
| 3/16"x92-1/2"x.025" 4s Flex Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
STARRETT® FLEXBACK BANDSAW BLADES
|
| 3/16"x111"x.025" 4s Flex Bndsaw Bld
...plus other(s)
|
|
|
|
Sawblades - Circular
|
STEEL CITY™ 8" STACK DADO SET IS HIGHLY DURABLE AND EASY TO SETUP
|
| 8" Stack Dado, 1/4" To 13/16"
|
THE STEEL CITY™ 8" STACK DADO SET CAN BE USED ON TABLE AND RADIAL ARM SAWS TO CUT SLOTS, GROOVES, DADOES AND RABBETS FROM WIDE IN EVERYTHING FROM VENEERED PLYWOODS AND LAMINATES TO SOLID WOOD:
INCLUDES 2-8" OUTSIDE BLADES, 5-CHIPPERS, 6-SHIMS PLUS A WOOD CASE. ADJUSTABLE FOR 1/4" TO 13/16" WIDTH CUTS. 5/8" ARBOR. WEIGHS 7 LBS. INCLUDING CASE. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Sawblades - Circular
|
FREUD® QUALITY AND CRAFTSMANSHIP IN AFFORDABLE 6" AND 8" DIAMETER STACK DADOES
|
| Sd206 6" Pro Dado Set
...plus other(s)
|
|
NEGATIVE HOOK ANGLES CUT FLAT BOTTOM GROOVES AND VIRTUALLY SPLINTER FREE CUTS. TWO OUTSIDE BLADES COMBINE WITH THE 5 TWO-WING CHIPPERS: FOUR 1/8" AND ONE 1/16" TO CUT DADOS FROM 1/4" TO 13/16" IN 1/16" INCREMENTS. 5/8" ARBORS: 6" DADO SET HAS 10 TEETH; 8", 12 TEETH. ANTI-KICKBACK DESIGN WITH RESHARPENABLE CARBIDE TIPS FOR YEARS OF USE. INCLUDES SHIM SET FOR FINE ADJUSTMENTS. NOT RECOMMENDED FOR FERROUS METALS OR MASONRY.
|
|
|
|
Sawblades - Circular
|
DEWALT® CORDLESS COMBO KITS INCLUDE A DRILL/DRIVER AND YOUR CHOICE OF SAW
|
| Dw9054 5-3/8" Carbide Tipped Blade
...plus other(s)
|
DEWALT® CORDLESS COMBO KITS LET YOU SELECT THE TOOLS THAT BEST MEET YOUR SPECIFIC REQUIREMENTS - 1/2" CHUCK DRILL/DRIVERS HAVE EXCLUSIVE 3-SPEED, ALL METAL TRANSMISSIONS:
MODEL DW987KC-2: 18V XRP™ DRILL/DRIVER WITH 450 IN-LBS. MAXIMUM TORQUE. INCLUDES DW938 18V CORDLESS RECIPROCATING SAW WITH KEYLESS BLADE CLAMP FOR QUICK BLADE CHANGES.
MODEL DW988KC-2: 18V XRP™ HAMMERDRILL/DRILL/DRIVER WITH 450 IN-LBS. MAXIMUM TORQUE. COMES WITH DW938 18V CORDLESS RECIPROCATING SAW WITH KEYLESS BLADE CLAMP FOR QUICK BLADE CHANGES.
MODEL DC987SA: DW987 18V XRP™ DRILL/DRIVER WITH 450 IN-LBS. MAXIMUM TORQUE. INCLUDES DW939 18V CIRCULAR SAW WITH 6-1/2", 24 TOOTH CARBIDE BLADE AND RIP FENCE THAT CAN CUT 2X4S AT A 45° ANGLE IN A SINGLE PASS.
18V COMBO KITS INCLUDE CHARGER, TWO 18V XR+ PACK™ BATTERIES, 360° SIDE HANDLE, DOUBLE ENDED SCREWDRIVER BIT AND CASE.
MODEL DC983SA: DW983 XRP™ 14.4V DRILL/DRIVER PROVIDES 400 IN-LBS. MAXIMUM TORQUE. ACCOMPANIED BY DW935 14.4V TRIM SAW WITH 5-3/8", 16 TOOTH CARBIDE TIPPED BLADE AND RIP FENCE THAT CUTS 2X4S AT 90° IN A SINGLE PASS. INCLUDES CHARGER, TWO 14.4V XR+ PACK™ BATTERIES, DOUBLE ENDED SCREWDRIVER BIT AND CASE.
ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Sawblades - Circular
|
PROTECT YOUR HANDS AND EXPENSIVE CIRCULAR SAWBLADES WITH ECONOMICAL BLADE GUARDS
|
| 7-1/4" Saw Blade Protector
|
|
THESE GUARDS PROTECT CIRCULAR SAWBLADES FROM CHIPPED OR BROKEN TEETH WHEN STORED IN A TOOLBOX. INEXPENSIVE, YET DURABLE BLADE GUARDS PROTECT 7" AND 7-1/4" SAWBLADES FOR A FRACTION OF THE COST OF BUYING NEW BLADES. SIMPLE TWO PIECE DESIGN SNAPS TOGETHER AND HOLDS THIN OR THICK KERF BLADES. SEMI-TRANSPARENT PLASTIC MAKES IT POSSIBLE TO VIEW SAWBLADE TEETH WITHOUT DISASSEMBLING.
|
|
|
|
Sawblades - Circular
|
FREUD® LU98 SINGLE SIDED LAMINATE/MELAMINE SAWBLADES CUT SMOOTHER AND LAST LONGER
|
| 7" Laminate/melamine Sawblade
...plus other(s)
|
CARBIDE TIPPED FREUD® LU98R SAWBLADES ARE LONG LIFE PRODUCTION BLADES FOR CHIP FREE SINGLE-SIDED LAMINATES, PARTICLE BOARD OR OTHER CUTTING:
1/4" MINIMUM CUT; 1-5/8" MAXIMUM. NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. MODIFIED TRIPLE CHIP GRIND - PRECISION TENSIONING WITH COMPUTER CONTROLLED EQUIPMENT KEEPS BLADE FLAT AND TRUE. FREUD® LU98M SAWBLADES ARE SIMILAR BUT DO NOT HAVE THE PERMA-SHIELD™ COATING - LIMITED TO QUANTITIES ON HAND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LM71M THICK STOCK RIP SAWBLADES
|
| 10"x18t Thick Stock Rip Blade
...plus other(s)
|
FREUD® LM71M THICK STOCK RIP SAWBLADES OFFER ALL THE QUALITY THAT FINE CABINETMAKERS EXPECT:
MICROGRAIN CARBIDE TIPS THICK ENOUGH FOR SEVERAL SHARPENINGS. TRI-METAL BRAZING FOR IMPACT RESISTANCE TO ENSURE LONGER LIFE. 20° HOOK ANGLE - FLAT GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU72M INDUSTRIAL THICK STOCK GENERAL PURPOSE SAWBLADES
|
| 8"x34t Thick Stock General Purpose
...plus other(s)
|
FREUD® LU72M INDUSTRIAL THICK STOCK GENERAL PURPOSE SAWBLADES ARE THE BEST CHOICE FOR PRODUCTION SIZING OF HARD OR SOFT WOODS:
CUT WOOD UP TO 3-1/2" THICK WITH MITER BOX. MICROGRAIN CARBIDE TIPS. TRI-METAL BRAZING FOR IMPACT RESISTANCE. 13° HOOK ANGLE - ATB GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU71M HEAVY DUTY GENERAL PURPOSE SAWBLADES
|
| 14"x42t Hd General Purpose Blade
...plus other(s)
|
FREUD® LU71M HEAVY DUTY GENERAL PURPOSE SAWBLADES ARE THE WORKHORSES OF THE COMPANY'S BLADES:
IDEAL FOR FAST SIZING THICK STOCK. 1/4" TO 1-1/4" RIPPING RANGE - 1-1/2" TO 3-1/2" CROSSCUT RANGE. MICROGRAIN CARBIDE TIPS. TRI-METAL BRAZING FOR IMPACT RESISTANCE. 15° HOOK ANGLE - ATB GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU81M INDUSTRIAL STACKED CHIPBOARD SAWBLADES
|
| 8"x34t Stacked Chipboard Blade
...plus other(s)
|
FREUD® LU81M INDUSTRIAL STACKED CHIPBOARD SAWBLADES ARE PERFECT FOR FAST SIZING THICK OR STACKED CHIPBOARD UP TO 3-1/2" HIGH:
WORKS WELL FOR HARD AND SOFT WOODS OR PLYWOOD WHERE SURFACE FINISH IS LESS IMPORTANT THAN CUT SPEED. THICK MICROGRAIN CARBIDE TIPS. TRI-METAL BRAZING FOR IMPACT RESISTANCE. 13° HOOK ANGLE - TCG GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU90M INDUSTRIAL THIN STOCK NON-FERROUS METALS' BLADES
|
| 10"x100t Thin Stock Nonferrous
...plus other(s)
|
FREUD® LU90M 10" AND 12" INDUSTRIAL THIN STOCK NON-FERROUS METALS' BLADES WERE SPECIFICALLY DESIGNED TO CUT THIN, NONFERROUS METAL EXTRUSIONS SUCH AS ALUMINUM STORM WINDOW FRAMES WITHOUT DAMAGING DELICATE PROFILES. (AMPLE USE OF LIQUID LUBRICANT RECOMMENDED WHEN CUTTING - WAX STICKS NOT RECOMMENDED.):
BLADES CUT CLEANLY AND QUICKLY THROUGH NONFERROUS MATERIALS WITHOUT BINDING. LASER CUT BLADE BODIES AND EXPANSION SLOTS. KICKBACK REDUCING DESIGN. TRI-METAL BRAZING FOR IMPACT RESISTANCE. 5° HOOK ANGLE - TCG GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU94M INDUSTRIAL PLASTICS SAWBLADES
|
| 8"x64t Plastics Blade
...plus other(s)
|
FREUD® LU94M INDUSTRIAL PLASTICS SAWBLADES CLEANLY CUT ACRYLIC, POLYCARBONATE, VINYL AND MOST OTHER PLASTICS WITHOUT MELTING:
THICK MICROGRAIN CARBIDE TIPS. LASER CUT BLADE BODIES AND EXPANSION SLOTS. KICKBACK REDUCING DESIGN. TRI-METAL BRAZING FOR IMPACT RESISTANCE. -3° HOOK ANGLE - MTCG GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® 10" CIRCULAR SAWBLADES RIP GLUE LINES, SLICE THROUGH SOLID SURFACES LIKE CORIAN® AND MAKE SHORT WORK OF LAMINATES
|
| 10"x30t Glue Line Rip
...plus other(s)
|
LASER CUT (NOT STAMPED) BLADES, LASER CUT HEAT EXPANSION SLOTS, LASER CUT 5/8" ARBORS, TO REDUCE VIBRATION, AND STRONG TICO™ CARBIDE TEETH ARE WHY FREUD® INDUSTRIAL 10" CIRCULAR SAWBLADES MAKE THE JOB EASIER AND MORE ACCURATE:
LM74 GLUE LINE RIP 30-TOOTH SAWBLADES ARE DESIGNED FOR CREATING A GLUE LINE RIP IN MATERIALS 1" AND UNDER. TRIPLE CHIP GRIND (TCG) TEETH PRODUCE EXTREMELY SMOOTH, TRUE SURFACES FOR GLUING AND FINISHING WORK - 12° HOOK ANGLE. LU95 SOLID SURFACE 72-TOOTH HEAVY DUTY SAWBLADES SLICE THOROUGH MATERIALS LIKE DUPONT CORIAN®, WILSONART GIBRALTAR® AND SSV FOUNTAINHEAD®, FLAWLESSLY. TCG BLADE LEAVES SURFACES BURN AND SWIRL FREE - 0° HOOK ANGLE. LU97 DOUBLE SIDED LAMINATE/MELAMINE 80-TOOTH SAWBLADES MINIMIZE CHATTER AND VIBRATION AND WITHSTAND ABRASIVE LAMINATES WITHOUT GIVING UP BLADE LIFE. TCG TEETH - NO SCORING BLADE REQUIRED - -3° HOOK ANGLE. AVAILABLE WITH POLISHED SILVER ICE™ SURFACE OR RED, NON-STICK PERMA-SHIELD™ COATING MAKES THAT BLADES RESISTANT TO FRICTION, HEAT AND PITCH BUILDUP. ITALY.
|
|
|
|
Sawblades - Circular
|
DIABLO™ CONSTRUCTION SERIES SAW BLADES PROVIDE MORE WORK, LESS CHATTER
|
| 7-1/4" X 24t X 5/8" Framing Blade, Atb
...plus other(s)
|
FREUD® DIABLO™ CONSTRUCTION SERIES SAW BLADES HAVE BEEN SPECIFICALLY BUILT TO MEET THE NEEDS OF THE CONSTRUCTION AND REMODELING MARKETS:
LASER CUT ARBORS, STABILIZER VENTS AND HEAT EXPANSION SLOTS. MICROGRAIN TITANIUM CARBIDE TEETH FOR DURABILITY AND LONGER CUTTING LIFE; IDEAL FOR WET LUMBER. RED, PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. FRAMING BLADES REQUIRE LESS POWER FROM THE SAW, EXTENDING ITS LIFE. RIPPING AND GENERAL PURPOSE BLADES - OAK, PINE, PRESSURE TREATED LUMBER AND PLYWOOD. COMBINATION AND FINISH BLADES - GOOD CHOICES FOR PLYWOOD. FINE FINISH BLADES - OAK, PINE, MELAMINE, PLYWOOD AND MOLDING CROSSCUTTING. ULTRA FINISH BLADES - OAK, PINE, MELAMINE, VENEER PLYWOOD AND DELICATE MOLDING CROSSCUTTING. ITALY.
|
|
|
|
Sawblades - Circular
|
DIABLO™ METAL CUTTING SAWBLADES DESIGNED FOR HEAVY DUTY, BURR FREE CUTS
|
| 7-1/4" X 56t X 5/8" Non-ferrous Metal
...plus other(s)
|
FREUD® DIABLO™ METAL CUTTING SAWBLADES HAVE WHAT IT TAKES FOR ON THE JOB CUTTING OF COPPER PIPE, ALUMINUM EXTRUSIONS, BRASS PLATE OR STEEL STUDS, PIPES AND SHEET STEEL:
LASER CUT BODIES FOR LONGER LIFE AND PRECISION CUTS. LASER CUT STABILIZER VENTS REDUCE NOISE AND VIBRATION. LASER CUT HEAT EXPANSION SLOTS ALLOW BLADE TO EXPAND DUE TO HEAT BUILDUP, KEEPING CUTS STRAIGHT AND TRUE. RED, PERMA-SHIELD™ COATING SHIELDS BLADES AGAINST HEAT AND CORROSION. BLADES COVERED BY MANUFACTURER'S LIMITED LIFETIME WARRANTY.
DIABLO™ NON-FERROUS METAL BLADES HAVE DURABLE MICROGRAIN TITANIUM CARBIDE TEETH FOR RAZOR SHARP CUTS AND LONGER LIFE. ALSO WORK ON PLASTIC: 122-990 - 7-1/4" X 56TCG, -6° HOOK ANGLE, 5/8" ARBOR, 0.106 KERF, 0.087 PLATE. 122-993 - 10" X 80TCG, -5° HOOK ANGLE, 5/8" ARBOR, 0.091 KERF, 0.071 PLATE. 122-996 - 12" X 96TCG, -5° HOOK ANGLE, 1" ARBOR, 0.091 KERF, 0.071 PLATE.
DIABLO™ STEEL DEMON™ FERROUS METAL BLADES HAVE SPECIALLY FORMULATED TUNGSTEN-TITANIUM TEETH WITH TRI-METAL SHOCK RESISTANT BRAZING TO WITHSTAND IMPACT, REDUCE WEAR AND LAST LONGER. USE ON STEEL STUDS, UNISTRUT™, ALL THREAD™, FLAT BAR, ANGLE IRON AND EMT CONDUIT: 122-999 - 7" X 48TCG, -2° HOOK ANGLE, 5/8" ARBOR, 0.103 KERF, 0.090 PLATE. 123-005 - 10" X 50TCG, -2° HOOK ANGLE, 5/8" ARBOR, 0.114 KERF, 0.098 PLATE. 123-008 - 12" X 60TCG, -2° HOOK ANGLE, 1" ARBOR, 0.114 KERF, 0.098 PLATE. 123-017 - 14" X 72TCG, -2° HOOK ANGLE, 1" ARBOR, 0.114 KERF, 0.098 PLATE. ONLY USE 123-005, 123-008 AND 123-017 ON DEDICATED, METAL CUTTING SAWS (1,800 MAXIMUM RPM).
|
|
|
|
Sawblades - Circular
|
FREUD® 10" LU83R THIN KERF COMBINATION SAWBLADE CUTS SMOOTHER, QUIETER AND WITH LESS WASTE
|
| 10x50t Thin Kerf Combination Blade
...plus other(s)
|
THE 10" DIA. FREUD® LU83R THIN KERF COMBINATION SAWBLADE REMOVES LESS MATERIAL, WHICH REDUCES WASTE AND MEANS EASIER FEEDING:
CUTS ARE QUIETER AND SMOOTHER WITH A SUPERIOR FINISH. ANTI-VIBRATION DESIGN ELIMINATES SIDEWAYS MOTION AND THE NEED FOR BLADE STABILIZERS. 50 TEETH (ATB WITH FLAT), 10° POSITIVE HOOK ANGLE, 0.091" KERF, 0.071" PLATE - 5/8" ARBOR. OVERSIZE CARBIDE TEETH PROVIDE UP TO 4 TIMES MORE SHARPENINGS THAN ORDINARY SAWBLADES. NON-STICK PERMA-SHIELD™ COATING MAKES BLADE RESISTANT TO HEAT BUILDUP AND CORROSION. LIMITED LIFETIME MANUFACTURER'S WARRANTY. 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. ARBOR. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU74R THIN KERF CROSSCUT SAWBLADES FEATURE PERMA-SHIELD™ PROTECTION
|
| 8"x64t Abt Thn Krf Crosscut Blade
...plus other(s)
|
FREUD® LU74R PERMA-SHIELD™ SAWBLADES PRODUCE A FINE FINISH WHEN CROSSCUTTING HARDWOODS, SOFTWOODS AND MOLDINGS:
USE ON HARDWOOD, SOFTWOOD, PLYWOOD AND PARTICLE BOARD; 1/4" MINIMUM DEPTH OF CUT, 1-5/8" MAXIMUM. NON-STICK COATING HELPS MAKE THE BLADE RESISTANT TO HEAT BUILDUP AND CORROSION - LASER CUT SLOTS REDUCE VIBRATION AND SIDEWAYS MOVEMENT. THIN KERF FOR EASIER FEEDING AND REDUCED WASTE. 5° POSITIVE HOOK ANGLE; AVAILABLE IN 8" AND 10" DIAMETERS (5/8" ARBORS) OR 12" AND 14" DIAMETERS (1" ARBORS). 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. ARBOR. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® BOX JOINT CUTTER SET
|
| Box Joint Cutter
|
THE PATENTED FREUD® SBOX8 BOX JOINT CUTTER SET PROVIDES A SIMPLE AND ACCURATE WAY TO CUT PERFECTLY SQUARE, CHIP FREE, FLAT BOTTOM BOX JOINTS WITHOUT SHIMS OR AWKWARD ADJUSTMENTS:
SIMPLY INSTALL THE 8" DIA., 5/8" ARBOR BLADES ON YOUR TABLE SAW (BACK-TO-BACK FOR 1/4" BOX JOINTS; FACE-TO-FACE FOR 3/8") AND FOLLOW ENCLOSED DIRECTIONS TO BUILD A JIG TO USE WITH YOUR SAW'S MITER GAUGE. TICO™ HI-DENSITY CARBIDE FOR A SMOOTHER FINISH AND LONGER LIFE. UNIQUE TOOTH DESIGN DELIVERS CLEAN CUTS THROUGH END GRAIN. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Sawblades - Circular
|
PORTER-CABLE® PREMIUM THIN KERF SAWBLADES
|
| 7 1/4" 40t 5/8' Arbor Blade Left
...plus other(s)
|
|
|
|
Sawblades - Circular
|
DELTA® 8" STACK DADO WITH DURABLE CASE
|
| 8" 24t 5/8" Stack Dado W/case & Shims
...plus other(s)
|
DELTA® 35-7670 8" STACK DADO COMES STANDARD WITH ALL OF THE CHIPPERS NEEDED FOR PLYWOOD AND SOLID-WOOD CONSTRUCTION:
HEAVY GAUGE, LASER CUT PLATES PROVIDE TRUE, ACCURATE CUTS - 5/8" ARBOR. OUTER BLADES ARE 1/8" THICK AND HAVE 24 TEETH. CHIPPERS INCLUDE FOUR, FOUR WING 1/8", ONE 3/32" AND 1/16" BLADES. ALL HAVE A -12° HOOK TO HELP CONTROL TEAR OUT AND PROVIDE FOR SAFER OPERATION IN RADIAL ARM SAW APPLICATIONS. MICRO-GRAIN CARBIDE TEETH DELIVER CLEAN CUTS AND REDUCE SPLINTERING. 12 STAINLESS STEEL SHIMS ALLOW FOR ULTRA-FINE WIDTH ADJUSTMENTS. HEAVY DUTY STORAGE CASE PROTECTS BLADES AGAINST CHIPPED TEETH AND DAMAGE. 5 LBS. NET WEIGHT; 10 LBS. SHIPPING WEIGHT. IMPORTED. NOTE: NOT FOR USE ON HAND HELD SAWS.
|
|
|
|
Sawblades - Circular
|
FREUD® LU73M HEAVY DUTY CROSSCUTTING BLADES FOR THE INDUSTRIAL CABINETMAKER
|
| 8" X 48t Cabinetmaker's Crosscut Blade
...plus other(s)
|
POLISHED METAL, CARBIDE TIPPED FREUD® LU73M SAWBLADES ARE PRIMARILY DESIGNED FOR HEAVY CROSSCUT USE IN A CABINETMAKERS' SHOPS:
ALTERNATE TOP BEVEL TOOTH DESIGN PROVIDES QUALITY CUTS. PRECISION TENSIONING WITH COMPUTER CONTROLLED EQUIPMENT KEEPS BLADE FLAT AND TRUE. USE ON HARDWOOD, SOFTWOOD, PLYWOOD, LAMINATE AND PARTICLE BOARD - 1/2" MINIMUM DEPTH OF CUT, 2-3/4" MAXIMUM. ITALY.
|
|
|
|
Sawblades - Circular
|
DELTA® PREMIUM CIRCULAR SAWBLADES REDUCE SPLINTERING AND TEAROUT DRAMATICALLY
|
| 10" X 24t X .118" X +20 Deg Rip Blade
...plus other(s)
|
|
|
|
Sawblades - Circular
|
FREUD® PREMIER FUSION™ 10" CIRCULAR SAWBLADE
|
| P410 10" X 40t Hi-atb Blade
...plus other(s)
|
A DOUBLE SIDE GROUND DESIGN FUSED WITH 30° HI-ATM TOOTH GEOMETRY MEAN THE NEW FREUD® F410 PREMIER FUSION™ 10" CIRCULAR SAWBLADE CAN PRODUCE FLAWLESS TOP, BOTTOM AND SIDE CUTS IN VENEERED PLYWOOD, HARDWOODS AND MELAMINE:
40 HI-ATB TICO™ CARBIDE TEETH, +18° HOOK ANGLE, 0.126 KERF, 0.098 PLATE, 5/8" ARBOR. 3/8" TO 1-1/2" DEEP RIP CUTS; 3/4" TO 3-1/2" DEEP CROSSCUTS. NON-STICK PERMA-SHIELD™ COATING RESISTS FRICTION, HEAT BUILDUP AND PITCH BUILD-UP. LASER CUT SLOTS MINIMIZE VIBRATION. ITALY.
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)
