|
|
|
Sawblades - Bandsaw
|
REPLACEMENT PORTA-BAND® BLADES ARE THE IDEAL CHOICE FOR PRODUCTION CUTTING
|
| 1/2"x44-7/8"bi-metal 14tpi Porta
...plus other(s)
|
THE BI-METAL M-42 USED IN A&H ABRASIVES™ REPLACEMENT PORTA-BAND® BLADES IS IDEAL FOR THE PRODUCTION CUTTING OF ABRASIVE, EXOTIC ALLOYS, TOOL STEEL OR STAINLESS STEEL:
BI-METAL MATRIX II HIGH SPEED STEEL CUTTING EDGE MAKES THE BEST ALL AROUND GENERAL PURPOSE BLADE FOR ALL TYPES OF MATERIAL. WILL FIT BLACK & DECKER®, GREENLEE®, MILWAUKEE®, PORTER-CABLE®, ROCKWELL®, SKIL® AND UNITEC® PORTABLE BANDSAWS THAT REQUIRE 0.020" THICK BLADES. USA AND IMPORTED.
|
|
|
|
Sawblades - Bandsaw
|
REPLACEMENT PORTA-BAND® BLADES ARE THE IDEAL CHOICE FOR PRODUCTION CUTTING
|
| 1/4x71-3/4x.025 6h Fl Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
REPLACEMENT PORTA-BAND® BLADES ARE THE IDEAL CHOICE FOR PRODUCTION CUTTING
|
| 1/4x80x.025 6h Fl Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
REPLACEMENT PORTA-BAND® BLADES ARE THE IDEAL CHOICE FOR PRODUCTION CUTTING
|
| 1/4x95x.025 6h Fl Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
REPLACEMENT PORTA-BAND® BLADES ARE THE IDEAL CHOICE FOR PRODUCTION CUTTING
|
| 1/4x105x.025 6h Fl Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
REPLACEMENT PORTA-BAND® BLADES ARE THE IDEAL CHOICE FOR PRODUCTION CUTTING
|
| 3/16x133x.025 4s Fl Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
PRECISION BLADE GUIDES AND CAST IRON TABLES HELP WOODTEK® 18", 20" AND 24" BAND SAWS RUN SMOOTHER
|
| 1/4x144x.025 6h Fl Bndsaw Bl
...plus other(s)
|
WITH TWO SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, WOODTEK® BAND SAWS TRACK STRAIGHT AND RUN COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOTS AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN AND A QUICK RELEASE BLADE LATCH. FOOT BRAKES ARE LARGE AND EASY TO REACH, SO YOU CAN QUICKLY STOP THE BLADE. SAWBLADE, TIRE, MITER GAUGE, RIP FENCE, GUIDE RAIL, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. 4" DIA. DUST COLLECTION PORT AT THE LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WOODTEK® 18" BAND SAW: MOTOR - 2 HP, 230V, 9.6A, 1PH, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 3,000 FPM. BLADE SIZE - 144", 1/4" TO 1" WIDE (17-1/2" DIA. WHEEL). HEIGHT CAPACITY - 10". DEPTH CAPACITY - 17-1/2". TABLE SIZE - 25-5/8" X 18-1/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 72-3/4"H X 31-1/2"W X 28-1/2"D. SHIPPING WEIGHT - 558 LBS.
WOODTEK® 20" BAND SAW: MOTOR - 2 HP, 230V, 12A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,000 FPM. BLADE SIZE - 155", 3/8" TO 1" WIDE (20" DIA. WHEEL). HEIGHT CAPACITY - 12-7/16". DEPTH CAPACITY - 19-3/16". TABLE SIZE - 23" X 20-1/2"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 73-3/4"H X 34"W X 26"D. SHIPPING WEIGHT - 593 LBS.
WOODTEK® 24" BAND SAW: MOTOR - 5 HP, 230V, 25A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,600 FPM. BLADE SIZE - 177", 3/8" TO 1" WIDE (23-1/4" DIA. WHEEL). HEIGHT CAPACITY - 15-1/2". DEPTH CAPACITY - 23-1/4". TABLE SIZE - 29" X 22-3/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 80"H X 36"W X 28"D. SHIPPING WEIGHT - 753 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Sawblades - Bandsaw
|
WOODTEK® FOUR SPEED METAL/WOOD CUTTING BANDSAWS WILL PROVIDE YEARS OF SERVICE
|
| 1/4x111x.025 14tpi Bi Bndsaw Bl
...plus other(s)
|
WOODTEK® 15" OR 18" FOUR SPEED METAL/WOOD CUTTING BANDSAWS WILL EASILY HANDLE FERROUS AND NON-FERROUS METALS AS WELL AS HARD AND SOFT WOODS - CLUTCH LEVER SWITCHES BETWEEN OPERATING MODES:
80 FPM (STEEL AND STEEL ALLOYS), 150 FPM (CAST IRON AND BRONZE), 200 FPM (ALUMINUM, BRASS AND COPPER) OR 2,800 FPM (WOODCUTTING). UPPER AND LOWER GUIDE PINS PROVIDE SAWBLADE SIDE SUPPORT THRUST BEARINGS SUPPORT REAR. SEPARATE BLADE TENSIONING AND BLADE TRACKING CONTROLS. HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOT AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. 14TPI METAL CUTTING AND 6TPI WOOD CUTTING SAWBLADES, TIRES, MITER GAUGE, RIP FENCE WITH KNOB, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
130-367 15" BANDSAW:
MOTOR - 1HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 111", 3/16" TO 3/4" WIDE (15" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 8-3/4". DEPTH CAPACITY - 14-5/8". TABLE SIZE - 15" X 15"; TILTS 5°L AND 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 68"H X 27"W X 22"D. NET WEIGHT - 302 LBS. SHIPPING WEIGHT - 353 LBS.
130-370 18" BANDSAW:
MOTOR - 1-1/2HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 133", 3/16" TO 1" WIDE (18" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-3/4". DEPTH CAPACITY - 17-3/4". TABLE SIZE - 18" X 19"; TILTS 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 75"H X 33"W X 24"D. NET WEIGHT - 344 LBS. SHIPPING WEIGHT - 400 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Sawblades - Bandsaw
|
WOODTEK® 10" BANDSAW IS BOTH POWERFUL AND PORTABLE
|
| 3/8x67x.025 4s Fl Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
STARRETT® BANDSAW COILS EXCEL AT GENERAL PURPOSE CUTTING
|
| 1/8"x.025x100ft 18s Flexback Coil
...plus other(s)
|
MANUFACTURED FROM CARBON STEEL, STARRETT® FLEXBACK BANDSAW COILS HAVE TEETH THAT HAVE BEEN HEAT TREATED TO RETAIN THEIR SHARP EDGE:
RECOMMENDED FOR GENERAL PURPOSE CUTTING OF EASY-TO-MACHINE FERROUS METAL, AS WELL AS WOOD AND NON-FERROUS METAL CUTTING, WHERE HIGH BLADE SPEEDS (1,000-6,000 FPM) ARE USED. COILS ARE 100 FEET LONG.
|
|
|
|
Sawblades - Bandsaw
|
DELTA® 20" STEEL FRAME BANDSAW MEETS PRODUCTION SHOP REQUIREMENTS
|
| 3/8" X 176" Flex 4 Hook
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
TOUGHER BLADES SPECIFICALLY FOR THREE WHEEL BANDSAWS
|
| 3/8x71-3/4x.014 14s Fl Bndsaw Bl
...plus other(s)
|
A&H ABRASIVES™ BLADES FOR THREE WHEEL BANDSAWS ARE MADE FROM THINNER, TOUGHER AND HEAT TREATED STEEL TO WITHSTAND SHARP FLEXING. BLADES HAVE BEEN SPECIALLY DESIGNED TO RESIST BLADE FATIGUE AND BREAKAGE ON 10" DIA. AND SMALLER BANDSAW WHEELS:
CHOOSE FROM THREE LENGTHS, THREE WIDTHS AND STANDARD OR SKIP TEETH. PAY LESS WHEN YOU ORDER THREE OR MORE BLADES AT THE SAME TIME! USA.
|
|
|
|
Sawblades - Bandsaw
|
HITACHI® 14-1/2" BANDSAW FEATURES 3" WIDE BLADE FOR PRECISION RESAWING
|
| 1x110-3/4x.023 2h Fl Bndsaw Bld
...plus other(s)
|
RESAWING VALUABLE WOOD IS FASTER AND MORE ACCURATE WITH THE LARGE BLADE CAPACITY OF THE HITACHI® CB 75F RESAW BANDSAW COMBINED WITH THE SAW'S 11-3/16" MAXIMUM CUTTING HEIGHT:
2.8HP, 120VAC, 15A, 1PH MOTOR - 900 RPM. HAND BRAKE NEXT TO START AND STOP BUTTONS FOR EXTRA SAFETY. 20-1/2" X 19-1/4" CAST IRON TABLE TILTS 45° AND HAS MITER GAUGE GROOVE. RACK AND PINION FENCE ADJUSTMENT PROVIDES SMOOTH OPERATION AND ACCURACY. ACCEPTS BLADES 1/4" TO 3" WIDE. ALL-STEEL BODY WITH BUILT-IN 4" DIA. DUST PORT. INCLUDES DURABLE 3" WIDE STELLITE® BLADE, GUIDE ASSEMBLY, TWO DOUBLE-END WRENCHES, BOX WRENCH, HEX BAR WRENCH, 6-1/2' LONG GROUNDED POWER CORD WITH PLUG AND INSTRUCTION MANUAL. 60"H X 37"W X 29"D, WEIGHS 308 LBS - DESIGNED FOR FLOOR MOUNTING. FIVE-YEAR MANUFACTURER'S WARRANTY. JAPAN.
HITACHI® CB 75F BANDSAW REPLACEMENT BLADES:
939-971 - 3" X 111.8" X 0.023" STELLITE® BLADE (12 TPF). 967-701 - 3" X 111.8" X 0.023" ALTERNATE-TOOTH STELLITE® BLADE (16 TPF). 921-705 - 1" X 110.75" X 0.025" SWAGED STEEL BLADE (24 TPF). 921-712 - 1/2" X 110.75" X 0.025" SWAGED STEEL BLADE (35 TPF). 921-719 - 1/4" X 110.75" X 0.025" SWAGED STEEL BLADE (48 TPF). 923-537 - 1" BLADE GUIDE (REQUIRED FOR 1" BLADE USE). 923-544 - 1/4" AND 1/2" BLADE GUIDE (REQUIRED FOR 1/4" AND 1/2" BLADE USE).
|
|
|
|
Sawblades - Bandsaw
|
BAHCO® FLEXBACK BANDSAW COILS SUITABLE FOR GENERAL PURPOSE CUTTING
|
| 3/4" X 4t/in Hook Bandsaw Coil (100')
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
STARRETT®/BAHCO®/MILFORD® REPLACEMENT BAND SAW BLADES
|
| 3/16x113x.025 4s Fl Bndsaw Bl
...plus other(s)
|
WOODWORKER'S SUPPLY® QUICK REFERENCE BAND SAW BLADE CHART LETS YOU MATCH A BLADE TYPE WITH YOUR CUTTING NEEDS:
ALL BLADES HAVE A RAKER SET AS SHOWN IN FIGURE A. THE RAKER TOOTH ACTS AS A RUDDER TO KEEP YOUR CUT TRUE AND IT CLEANS AS IT CUTS TO PREVENT CLOGGING AND BURNING. TOOTH CONFIGURATIONS ARE SHOWN IN FIGURE B. STANDARD TEETH HAVE A 0° ANGLE AND ARE USED FOR GENERAL PURPOSE SAWING. THEY GIVE A SMOOTH CUT AND ARE RECOMMENDED FOR INTRICATE CURVES AND STRAIGHT CUT OFF WORK. SKIP TEETH HAVE A 0° ANGLE WITH SHALLOW GULLETS THAT PROVIDE AMPLE CHIP REMOVAL. LARGE GULLETS RESIST CLOGGING. HOOK TEETH HAVE A 10° ANGLE THAT BITES MORE AGGRESSIVELY INTO THE MATERIAL, REQUIRING LESS FEED PRESSURE. SAW BLADE LENGTHS RANGE FROM 52-3/4" TO 177".
|
|
|
|
Sawblades - Bandsaw
|
STARRETT®/BAHCO®/MILFORD® REPLACEMENT BAND SAW BLADES
|
| 3/16x92-1/2x.025 4s Fl Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Bandsaw
|
STARRETT®/BAHCO®/MILFORD® REPLACEMENT BAND SAW BLADES
|
| 3/16x111x.025 4s Fl Bndsaw Bl
...plus other(s)
|
|
|
|
Sawblades - Circular
|
FREUD® QUALITY AND CRAFTSMANSHIP IN AFFORDABLE 6" AND 8" DIAMETER STACK DADOES
|
| Sd206 6" Pro Dado Set
...plus other(s)
|
|
NEGATIVE HOOK ANGLES CUT FLAT BOTTOM GROOVES AND VIRTUALLY SPLINTER FREE CUTS. TWO OUTSIDE BLADES COMBINE WITH THE 5 TWO-WING CHIPPERS: FOUR 1/8" AND ONE 1/16" TO CUT DADOS FROM 1/4" TO 13/16" IN 1/16" INCREMENTS. 5/8" ARBORS: 6" DADO SET HAS 10 TEETH; 8", 12 TEETH. ANTI-KICKBACK DESIGN WITH RESHARPENABLE CARBIDE TIPS FOR YEARS OF USE. INCLUDES SHIM SET FOR FINE ADJUSTMENTS. NOT RECOMMENDED FOR FERROUS METALS OR MASONRY.
|
|
|
|
Sawblades - Circular
|
DEWALT® CORDLESS COMBO KITS INCLUDE A DRILL/DRIVER AND YOUR CHOICE OF SAW
|
| Dw9054 5-3/8" Carbide Tipped Blade
...plus other(s)
|
DEWALT® CORDLESS COMBO KITS LET YOU SELECT THE TOOLS THAT BEST MEET YOUR SPECIFIC REQUIREMENTS - 1/2" CHUCK DRILL/DRIVERS HAVE EXCLUSIVE 3-SPEED, ALL METAL TRANSMISSIONS:
MODEL DW987KC-2: 18V XRP™ DRILL/DRIVER WITH 450 IN-LBS. MAXIMUM TORQUE. INCLUDES DW938 18V CORDLESS RECIPROCATING SAW WITH KEYLESS BLADE CLAMP FOR QUICK BLADE CHANGES.
MODEL DW988KC-2: 18V XRP™ HAMMERDRILL/DRILL/DRIVER WITH 450 IN-LBS. MAXIMUM TORQUE. COMES WITH DW938 18V CORDLESS RECIPROCATING SAW WITH KEYLESS BLADE CLAMP FOR QUICK BLADE CHANGES.
MODEL DC987SA: DW987 18V XRP™ DRILL/DRIVER WITH 450 IN-LBS. MAXIMUM TORQUE. INCLUDES DW939 18V CIRCULAR SAW WITH 6-1/2", 24 TOOTH CARBIDE BLADE AND RIP FENCE THAT CAN CUT 2X4S AT A 45° ANGLE IN A SINGLE PASS.
18V COMBO KITS INCLUDE CHARGER, TWO 18V XR+ PACK™ BATTERIES, 360° SIDE HANDLE, DOUBLE ENDED SCREWDRIVER BIT AND CASE.
MODEL DC983SA: DW983 XRP™ 14.4V DRILL/DRIVER PROVIDES 400 IN-LBS. MAXIMUM TORQUE. ACCOMPANIED BY DW935 14.4V TRIM SAW WITH 5-3/8", 16 TOOTH CARBIDE TIPPED BLADE AND RIP FENCE THAT CUTS 2X4S AT 90° IN A SINGLE PASS. INCLUDES CHARGER, TWO 14.4V XR+ PACK™ BATTERIES, DOUBLE ENDED SCREWDRIVER BIT AND CASE.
ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Sawblades - Circular
|
PROTECT YOUR HANDS AND EXPENSIVE CIRCULAR SAWBLADES WITH ECONOMICAL BLADE GUARDS
|
| 7-1/4" Saw Blade Protector
|
|
THESE GUARDS PROTECT CIRCULAR SAWBLADES FROM CHIPPED OR BROKEN TEETH WHEN STORED IN A TOOLBOX. INEXPENSIVE, YET DURABLE BLADE GUARDS PROTECT 7" AND 7-1/4" SAWBLADES FOR A FRACTION OF THE COST OF BUYING NEW BLADES. SIMPLE TWO PIECE DESIGN SNAPS TOGETHER AND HOLDS THIN OR THICK KERF BLADES. SEMI-TRANSPARENT PLASTIC MAKES IT POSSIBLE TO VIEW SAWBLADE TEETH WITHOUT DISASSEMBLING.
|
|
|
|
Advanced Search Tools
Browse our
to see Sub Categories)
