|
|
|
Abrasives - Accessories/hand Sanding
|
PREPPIN' WEAPON SANDING BLOCK
|
| Preppin Weapon Sanding Block
|
THE PREPPIN' WEAPON SANDING BLOCK LETS YOU LOAD UP TO FOUR SHEETS OF SANDPAPER AT ONE TIME AND THEN TEAR OFF EACH SHEET AS IT WEARS OUT:
USES 1/4 SHEETS CUT FROM 9" X 11" SANDPAPER. EASY TO USE LEVER ACTION CLIPS MAKE RELOADING A SNAP. HIGH IMPACT ABS PLASTIC BODY. POLISHED STAINLESS STEEL CLIPS WON'T RUST, PERMITTING DRY OR WET SANDING - STYROFOAM CORE MEANS BLOCK WILL FLOAT. TAPERED EDGES ALLOW SANDING INTO CORNERS. COMFORTABLE GRIP REDUCES FATIGURE DURING EXTENDED PERIODS OF WORK. 7-3/4"L X 2-3/4"W, WEIGHS 1 LB. USA.
|
|
|
|
Abrasives - Accessories/hand Sanding
|
ROUND RUBBER HAND SANDER
|
| 5" Psa Round Rubber Hand Sander
...plus other(s)
|
USING THE SAME 5" OR 6" DIA. HOOK & LOOP (H&L) OR PRESSURE SENSITIVE ADHESIVE (PSA) DISC SANDPAPER AS YOUR POWERED SANDER, A ROUND RUBBER HAND SANDER WORKS GREAT WITH FINE GRIT TO GET OUT THE FINAL SWIRL MARKS LEFT BY A RANDOM ORBIT SANDER:
EASY GRIP HANDLE FOR QUICK AND EFFICIENT HAND SANDING. ALTHOUGH ROUND AND FLAT, SANDER WILL STILL ROLL UP ONTO A BACK SPLASH OR GENTLE CONTOUR, WHEN NEEDED."
|
|
|
|
Abrasives - Accessories/hand Sanding
|
ROUND RUBBER HAND SANDER
|
| 5" H&l Round Rubber Hand Sander
...plus other(s)
|
USING THE SAME 5" OR 6" DIA. HOOK & LOOP (H&L) OR PRESSURE SENSITIVE ADHESIVE (PSA) DISC SANDPAPER AS YOUR POWERED SANDER, A ROUND RUBBER HAND SANDER WORKS GREAT WITH FINE GRIT TO GET OUT THE FINAL SWIRL MARKS LEFT BY A RANDOM ORBIT SANDER:
EASY GRIP HANDLE FOR QUICK AND EFFICIENT HAND SANDING. ALTHOUGH ROUND AND FLAT, SANDER WILL STILL ROLL UP ONTO A BACK SPLASH OR GENTLE CONTOUR, WHEN NEEDED.
|
|
|
|
Abrasives - Accessories/hand Sanding
|
A&H ABRASIVES SANDING SPONGES
|
| 3"x4" Sand Sponge Coarse (60 Grit)
...plus other(s)
|
BUY IN BULK AND SAVE 3" X 4" SANDING SPONGES 144 TO THE CASE. COME IN FOUR DIFFERENT GRITS:
COARSE (60 GRIT), MEDIUM (80 GRIT), FINE (100 GRIT), EXTRA FINE (150 GRIT). 1/2" THICK FOAM PADS ARE REINFORCED WITH FABRIC FOR LONGER LIFE. CONFORMS TO SHAPES BETTER THAN CONVENTIONAL SANDPAPER AND LAST UP TO 10 TIMES LONGER. CAN BE USED WER OR DRY. GRIT IS ON ONE SIDE ONLY.
|
|
|
|
Abrasives - Accessories/hand Sanding
|
5" AND 6" FLEX HAND SANDING PADS
|
| 5" H&l Flex Pad, 3/8" Thick
...plus other(s)
|
FLEX HAND SANDING PADS ARE GREAT FOR CONTOUR SANDING ON FURNITURE, WOODTURNINGS AND WHEREVER CURVED AND IRREGULAR SHAPES ARE HARD TO SAND. THESE H&L SPONGE PADS SAVE YOUR FINGERPRINTS WHILE ENSURING CONSISTENT SURFACES AND LONGER LASTING SANDPAPER:
ELASTIC STRAP SECURELY HOLDS PAD TO HAND. CAN BE USED WITH ANY H&L SANDPAPER AND ABRASIVE PADS. USE 1/8" PAD FOR TIGHTER CURVES AND SMALL DIAMETER SPINDLES. USE 3/8" PAD FOR LARGER CURVES, BOWLS AND FLAT SANDING OPERATIONS. INTERFACE PADS ADD ADDITIONAL CUSHIONING AND FLEXIBILITY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
C-WEIGHT H&L PAPER BACKED DISCS - 132-674. F-WEIGHT H&L CLOTH BACKED DISCS - 949-846. J-WEIGHT H&L CLOTH BACKED DISCS - 131-387. NYLON H&L ABRASIVE PADS - 912-776. MICRO H&L SANDING DISCS - 949-373. MICRO-MESH H&L SANDING DISCS - 125-315. ABRALON H&L SANDING PADS - 928-165. LAMBS WOOL H&L BUFFING PADS - 143-186.
|
|
|
|
Abrasives - Accessories/hand Sanding
|
HAND SANDING BLOCKS FOR ALMOST EVERY IMAGINABLE SHAPE
|
| Curv-a-flex
...plus other(s)
|
CURVED PIECES, TIGHT CORNERS, NOOKS AND CRANNIES ARE ALL EASIER TO SAND WITH THESE COMFORTABLE, PREMOLDED OR MEDIUM DENSITY RUBBER HAND SANDING BLOCKS:
920-555 - CURV-A-FLEX™ CAN BE ROLLED TIGHTER OR LOOSER TO MATCH ANY RADIUS YOU NEED TO SAND. 5-1/2"L X 2-1/8" OD RADIUS CURVE - PREMOLDED RUBBER. 920-565 - 5" TRUE FLAT PUTS A LOT OF PAPER IN CONTACT WITH THE WOOD TO SPEED PANEL SANDING. 2-3/4"W X 5"L - MEDIUM DENSITY RUBBER. 920-569 - 9" TRUE FLAT IS SIMILAR TO 5" TRUE FLAT BUT IS 9"L. 920-576 - LARGE TEARDROP™ HAS SHARP POINTS AND EDGES THAT ARE GREAT FOR SANDING GLUE FROM CORNERS, WHILE THE SMOOTH RADIUS MAKES IT USEFUL FOR CURVED PIECES. SPLIT DESIGN LOCKS ABRASIVE PAPER IN PLACE. 5-1/2"L X 1-5/8" OD RADIUS CURVE - PREMOLDED RUBBER. 920-583 - SMALL TEARDROP™ IS SIMILAR TO LARGE TEARDROP BUT IS 2-1/2"L. 920-590 - DOUBLE DENSITY BLOCKS HAVE A FIRM SIDE FOR SANDING PANELS AND A SOFTER SIDE FOR CONTOURS. "H X "W X "L - SOFT RUBBER, CAN BE USED FOR WET OR DRY SANDING. 920-592 - BUY ALL SIX SANDING BLOCKS AT ONE TIME AND SAVE ON PRICE AND SHIPPING! SANDING BLOCKS CAN USE 1/4 AND 1/2 SHEET OR ROLL STOCK ABRASIVES (NOT INCLUDED).
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
111-122 - 9" X 11" ALUMINUM OXIDE SANDPAPER SHEETS.
|
|
|
|
Abrasives - Accessories/hand Sanding
|
HAND SANDING BLOCKS
|
| 5" True Flat Sander
...plus other(s)
|
CURVED PIECES, TIGHT CORNERS, NOOKS AND CRANNIES ARE ALL EASIER TO SAND WITH THESE COMFORTABLE, PREMOLDED OR MEDIUM DENSITY RUBBER HAND SANDING BLOCKS:
920-555 - CURV-A-FLEX™ CAN BE ROLLED TIGHTER OR LOOSER TO MATCH ANY RADIUS YOU NEED TO SAND. 5-1/2"L X 2-1/8" OD RADIUS CURVE - PREMOLDED RUBBER. 920-565 - 5" TRUE FLAT PUTS A LOT OF PAPER IN CONTACT WITH THE WOOD TO SPEED PANEL SANDING. 2-3/4"W X 5"L - MEDIUM DENSITY RUBBER. 920-569 - 9" TRUE FLAT IS SIMILAR TO 5" TRUE FLAT BUT IS 9"L. 920-576 - LARGE TEARDROP™ HAS SHARP POINTS AND EDGES THAT ARE GREAT FOR SANDING GLUE FROM CORNERS, WHILE THE SMOOTH RADIUS MAKES IT USEFUL FOR CURVED PIECES. SPLIT DESIGN LOCKS ABRASIVE PAPER IN PLACE. 5-1/2"L X 1-5/8" OD RADIUS CURVE - PREMOLDED RUBBER. 920-583 - SMALL TEARDROP™ IS SIMILAR TO LARGE TEARDROP BUT IS 2-1/2"L. 920-590 - DOUBLE DENSITY BLOCKS HAVE A FIRM SIDE FOR SANDING PANELS AND A SOFTER SIDE FOR CONTOURS. "H X "W X "L - SOFT RUBBER, CAN BE USED FOR WET OR DRY SANDING. 920-592 - BUY ALL SIX SANDING BLOCKS AT ONE TIME AND SAVE ON PRICE AND SHIPPING! SANDING BLOCKS CAN USE 1/4 AND 1/2 SHEET OR ROLL STOCK ABRASIVES (NOT INCLUDED).
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
111-122 - 9" X 11" ALUMINUM OXIDE SANDPAPER SHEETS.
|
|
|
|
Abrasives - Accessories/lubricants
|
ABRASIVE BELT LUBRICANT
|
| 3.2 Oz Mag Lub Abrasive Lubricant
...plus other(s)
|
MAGLUBE® SOLID BLOCK LUBRICANT REALLY WORKS AND IS COMPLETELY BIODEGRADABLE, SAFE AND CAN DOUBLE THE LIFE OF ABRASIVE BELTS OR DISCS:
KEEPS SANDPAPER CLEAN AND SHARP LONGER - WON'T SPOT OR STAIN WOOD. GENTLY RUB ON FOR IMMEDIATE RESULTS. 1-3/8"H X 2-3/4"W X 1-13/16"D BLOCK; 2" DIA. X 9" TUBE. BEST RESULTS ARE ACHIEVED WHEN USED IN COMBINATION WITH AN ABRASIVE CLEANING STICK. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ABRASIVE CLEANING STICKS - 111-001.
|
|
|
|
Abrasives - Detail & Multi Tool Shapes/fits Black & Decker Mouse H&l
|
A&H ABRASIVESTM SANDER DISCS
|
| Mouse Shape H&l Alox 80 Grit
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ GOLD SANDPAPERFITS BLACK AND DECKER MOUSE DETAIL SANDERS SHAPES:
HOOK & LOOP (H&L) BACKINGS; NO DUST HOLES. H&L ADHERES SOLIDLY BUT REMOVES EASILY WHEN WORN. 40, 80, 120, 180 AND 240 GRIT.
|
|
|
|
Abrasives - Detail & Multi Tool Shapes/fits Bosch & P-c H&l
|
A&H ABRASIVES™ SANDER DISCS
|
| Bosch Detail 6 Hole H&l Alox 40 Grit
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ GOLD SANDPAPER FITS VIRTUALLY ALL MAJOR BRAND DETAIL SANDERS:
HOOK & LOOP (H&L) OR PRESSURE SENSITIVE ADHESIVE (PSA) BACKINGS; NO DUST HOLES. PSA ADHERES SOLIDLY BUT REMOVES EASILY WHEN WORN. 40, 80, 120, 180 AND 240 GRIT. WOLFCRAFT® STYLE SANDPAPER IS LIMITED TO QUANTITIES ON HAND."
|
|
|
|
Abrasives - Detail & Multi Tool Shapes/fits Bosch & P-c H&l
|
A&H ABRASIVESTM SANDER DISCS
|
| Bosch Detail 6 Hole H&l Alox 120 Grit
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ SUPER GOLD SANDPAPER FITS BOSCH BRAND DETAIL SANDERS:
HOOK & LOOP (H&L) BACKINGS; WITH DUST HOLES. 40, 80, 120, 180 AND 240 GRIT.
|
|
|
|
Abrasives - Detail & Multi Tool Shapes/fits Bosch Finger Shape H&l
|
A&H ABRASIVESTM SANDER DISCS
|
| Bosch Finger H&l Alox 100 Grit
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ SUPER GOLD ALUMINUM OXIDE SANDPAPER FITS BOSCH BRAND FINGER SHAPE DETAIL SANDERS:
HOOK & LOOP (H&L 40, 80, 120, 180 AND 240 GRIT.
|
|
|
|
Abrasives - Detail & Multi Tool Shapes/fits Fein & Dremel Multi-max H&l
|
A&H ABRASIVESTM SANDER DISCS
|
| Fein/dremel H&l Alox 120 Grit
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ SUPER GOLD SANDPAPER FITS HOOK AND LOOP DREMEL AND FEIN BRAND DETAIL SANDERS:
HOOK & LOOP (H&L) BACKINGS; NO DUST HOLES. 40, 80, 120, 180 AND 240 GRIT.
|
|
|
|
Abrasives - Detail & Multi Tool Shapes/fits Fein Psa
|
A&H ABRASIVESTM SANDER DISCS
|
| Fein Detail Psa Alox 80 Grit
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ SUPER GOLD SANDPAPER FITS FEIN BRAND DETAIL SANDERS:
PRESSURE SENSITIVE ADHESIVE (PSA) BACKINGS; NO DUST HOLES. PSA ADHERES SOLIDLY BUT REMOVES EASILY WHEN WORN. 40, 80, 120, 180 AND 240 GRIT.
|
|
|
|
Abrasives - Detail & Multi Tool Shapes/fits Porter Cable Diamond H&l
|
A&H ABRASIVESTM SANDER DISCS
|
| Pc Detail H&l Alox 120 Grit
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ SUPER GOLD SANDPAPER FITS PORTER CABLE BRAND DETAIL SANDERS:
HOOK & LOOP (H&L) BACKINGS; NO DUST HOLES. 40, 80, 120, 180 AND 240 GRIT.
|
|
|
|
Abrasives - Detail & Multi Tool Shapes/fits Ryobi Psa
|
A&H ABRASIVESTM SANDER DISCS
|
| Ryobi Detail Psa Alox 120 Grit
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ SUPER GOLD SANDPAPER FITS RYOBI BRAND DETAIL SANDERS:
PRESSURE SENSITIVE ADHESIVE (PSA) BACKINGS; NO DUST HOLES. PSA ADHERES SOLIDLY BUT REMOVES EASILY WHEN WORN. 40, 80, 120, 180 AND 240 GRIT. WOLFCRAFT® STYLE SANDPAPER IS LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Abrasives - Discs/aluminum Oxide (j-weight) Micro Mesh
|
5" AND 6" MICRO MESH CUSHIONED ABRASIVE DISC
|
| 5" H&l Micro Mesh 1500 Grit Disc
...plus other(s)
|
AVAILABLE IN 5" OR 6" DIA., HOOK & LOOP (H&L) MICRO-MESH ABRASIVE DISCS ARE CUSHIONED TO PROVIDE HIGH-GLOSS FINISHES - USE ON BARE WOOD, PLASTICS OR BETWEEN MULTIPLE FINISH COATS:
WITH BARE WOOD, SMOOTH WORKPIECE WITH CONVENTIONAL SANDPAPER, THEN WET SAND WITH INCREASINGLY FINER GRIT MICRO-MESH (1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000) TO REMOVE EVEN THE SMALLEST IMPERFECTIONS. BETWEEN MULTIPLE COATS, ONLY SAND WITH 3200 GRIT BEFORE RECOATING. FOR FINAL FINISH COAT, START WITH 2400 GRIT AND PROCEED WITH FINER GRITS UNTIL DESIRED GLOSS IS ACHIEVED. FOR BEST RESULTS, USE WET - CAN BE CLEANED WITH WATER. SOLD IN PACKAGES OF 5 DISCS. 125-039 - 5" DIA. H&L NINE-DISC ASSORTMENT (1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000 GRIT). 125-081 - 6" DIA. H&L NINE-DISC ASSORTMENT (1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000 GRIT).
|
|
|
|
Abrasives - Drums And Sleeves/other
|
SLEEVELESS SANDING DRUMS
|
| 1"x3" W 1/4" Shaft Sleeveless Drum
...plus other(s)
|
|
A SIMPLE LOCK HOLDS SANDPAPER TIGHT SO YOU CAN USE ROLL OR SHEET PAPER FOR BIG SAVINGS OVER SANDING SLEEVES. SPONGE RUBBER BACKING INCREASES SANDPAPER LIFE AND REDUCES GOUGING; 1,750 RPM RECOMMENDED SPEED. DRUMS HAVE A 1/2" BORE. EACH HAS A 1/2" ADAPTER FOR USE IN DRILL PRESSES AND LATHE CHUCKS (DRUMS SMALLER THAN 2" DIAMETER HAVE 1/4" ADAPTERS). 901-865 - FOUR DRUM SET (3/4", 1", 2" AND 3" X 3") INCLUDES THREE ADAPTERS .
|
|
|
|
Abrasives - Misc/flapwheel
|
REPLACEMENT ABRASIVE LOADINGS
|
| 5pc Alox 60x Slashed Loading For B-12
...plus other(s)
|
UPDATE YOUR SAND-RITE DB-612 SANDER WITH FACTORY ORIGINAL REPLACEMENT PARTS:
FIVE ASSEMBLIES OF THREE FLAPS, EACH, MAKE UP A TOTAL OF 15 FLAPS PER LOAD - FLAPS ARE 12" LONG. HEAVY DUTY 1/4" STAGGERED, SLASHED CLOTH SANDPAPER LOADING. AVAILABLE IN SEVEN GRITS RANGING FROM 60 TO 220. 822-282, 822-289 - 6" X 7" CANVAS, 6" X 7" TUBES AND VALVE ASSEMBLIES PROVIDE OEM CONVENIENCE. 822-920 - SET OF 15 REPLACEMENT BRUSHES. 822-289, 822-297 - LIMITED TO QUANTITIES ON HAND."
|
|
|
|
Abrasives - Misc/flapwheel
|
REPLACEMENT ABRASIVE LOADINGS
|
| 5pc Alox 120x Slashed Loading For B-12
...plus other(s)
|
UPDATE YOUR SAND-RITE DB-612 SANDER WITH FACTORY ORIGINAL REPLACEMENT PARTS:
FIVE ASSEMBLIES OF THREE FLAPS, EACH, MAKE UP A TOTAL OF 15 FLAPS PER LOAD - FLAPS ARE 12" LONG. HEAVY DUTY 1/4" STAGGERED, SLASHED CLOTH SANDPAPER LOADING. AVAILABLE IN SEVEN GRITS RANGING FROM 60 TO 220. 822-282, 822-289 - 6" X 7" CANVAS, 6" X 7" TUBES AND VALVE ASSEMBLIES PROVIDE OEM CONVENIENCE. 822-920 - SET OF 15 REPLACEMENT BRUSHES. 822-289, 822-297 - LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Abrasives - Misc/other
|
10 POUNDS OF SANDPAPER REMNANTS
|
| Medium Sandpaper Remnants
...plus other(s)
|
|
|
|
Abrasives - Rolls/aluminum Oxide (f-weight) (red)
|
A&H ABRASIVES™ 4 1/2" WIDE ABRASIVE ROLLS"
|
| 4-1/2"x10ft Alox 60f Roll
...plus other(s)
|
|
EXTRA HEAVY E-WEIGHT BACKING AND PREMIUM RESIN-OVER-RESIN BOND OFFER EXCEPTIONAL DURABILITY. 4-1/2" WIDE IN 10' AND 150' LENGTHS; SEVEN GRITS, RANGING FROM 60 TO 220. SANDPAPER IN ROLLS LETS YOU CUT OFF JUST THE LENGTH NEEDED. MADE IN USA WITH COMPONENTS FROM SWEDEN AND USA."
|
|
|
|
Abrasives - Rolls/aluminum Oxide (j-weight) Open (red)
|
A&H ABRASIVESTM FLEXIBLE CLOTH BACKED J WEIGHT SANDPAPER
|
| 1-1/2"x150ft Alox 80j Shop Roll
...plus other(s)
|
|
"J" WEIGHT BACKING IS VERY SIMILAR TO THE DENIM CLOTH USED IN BLUE JEANS. SUPER FLEXIBLE CLOTH BACKED SANDPAPER 1-1/2" WIDE ROLLS FOR LATHE TURNERS. GRITS RANGE FROM 60 TO 220. SWEDEN.
|
|
|
|
Abrasives - Rolls/aluminum Oxide (j-weight) Open (red)
|
A&H ABRASIVESTM FLEXIBLE CLOTH BACKED J WEIGHT SANDPAPER
|
| 2"x150ft Alox 80j Shop Roll
...plus other(s)
|
|
"J" WEIGHT BACKING IS VERY SIMILAR TO THE DENIM CLOTH USED IN BLUE JEANS. SUPER FLEXIBLE CLOTH BACKED SANDPAPER 2" WIDE ROLLS FOR LATHE TURNERS. GRITS RANGE FROM 60 TO 220. SWEDEN.
|
|
|
|
Abrasives - Rolls/aluminum Oxide (j-weight) Open (red)
|
A&H ABRASIVES™ FLEXIBLE CLOTH BACKED J WEIGHT SANDPAPER
|
| 4-1/2"x10ft Alox 60j Roll
...plus other(s)
|
|
"J" WEIGHT BACKING IS VERY SIMILAR TO THE DENIM CLOTH USED IN BLUE JEANS. SUPER FLEXIBLE CLOTH BACKED SANDPAPER IS AVAILABLE IN 4-1/2" WIDE ROLLS THAT EASILY TUCK UNDER THE CLIPS OF 1/4 AND 1/2 SHEET SANDERS. ALSO AVAILABLE IN 1", 1-1/2" AND 2" WIDE ROLLS FOR LATHE TURNERS. 10' AND 150' LONG ROLLS; GRITS RANGE FROM 60 TO 220. SWEDEN."
|
|
|
|
Abrasives - Rolls/aluminum Oxide (j-weight) Open (red)
|
A&H ABRASIVESTM FLEXIBLE CLOTH BACKED J WEIGHT SANDPAPER
|
| 4-1/2"x10ft Alox 120j Roll
...plus other(s)
|
|
"J" WEIGHT BACKING IS VERY SIMILAR TO THE DENIM CLOTH USED IN BLUE JEANS. SUPER FLEXIBLE CLOTH BACKED SANDPAPER PREMIUM GRADE ABRASIVE 4-1/2" WIDE ROLLS TUCK NICELY UNDER 1/4 AND 1/2 SHEET SANDERS . GRITS RANGE FROM 60 TO 220. SWEDEN.
|
|
|
|
Abrasives - Rolls/silicon Carbide Paper Stearated (silver)
|
PRESSURE SENSITIVE ADHESIVE (PSA) ABRASIVES IDEAL FOR 1/4 AND 1/2 SHEET SANDERS
|
| 4-1/2"x10yd Psa Silcarb 80 Grit Roll
...plus other(s)
|
4-1/2" X 30' PSA-BACKED SANDPAPER BY THE ROLL - JUST CUT TO LENGTH AND STICK ONTO YOUR PSA SANDER PAD:
PSA ADHERES SOLIDLY BUT REMOVES EASILY WHEN WORN. SEVEN GRITS FROM 80 TO 320. STIKIT™ REPLACEMENT PADS ARE FOR USE WITH PORTER-CABLE® SANDERS. USA.
|
|
|
|
Abrasives - Rolls/silicon Carbide Paper Stearated (silver)
|
3/M STIKIT SANDPAPER
|
| 4-1/2"x10yd Psa Silcarb 120 Grit Roll
...plus other(s)
|
|
4-1/2" X 10 YARD 3/M STIKIT SILICON CARBIDE PSA SANDPAPER ROLLS CAN BE CUT TO LENGTH AND STICK TO YOUR 1/4 OR 1/2 SHEET SANDER. THE SILICON CARBIDE ABRASIVE BREAKS DOWN EVENLY TO LEAVE THE BEST FINISH ON BARE OR FINISHED WOODS. WATER SOLUABLE STEARATE COATING HELPS RESIST LOADING AND MAKES THE SANDPAPER LAST LONGER.
|
|
|
|
Abrasives - Sheets/aluminum Oxide (j-weight) (red)
|
A&H ABRASIVESTM 9" X 11" SHEET SANDPAPER
|
| 9"x11" Alox 80j Cloth Sheet
...plus other(s)
|
A&H ABRASIVES™ 9" X 11" ALUMINUM OXIDE "J" WT CLOTH SANDPAPER SHEETS ARE SOLD IN SLEEVES OF 50 OR 100 SO YOU CAN STOCK UP ON A FEW EXTRA GRITS:
SAVE BY GETTING 5 OR MORE SLEEVES. USA.
|
|
|
|
Abrasives - Sheets/aluminum Oxide (j-weight) (red)
|
MICRO MESH CUSHIONED ABRASIVE FINISHING KIT
|
| 3"x4" Micro Mesh Kit 1 Ea Grit+block
...plus other(s)
|
USE THE MICRO-MESH FINISH SANDING KIT TO BRING PAINT AND POLYESTER FINISHES OR WOOD AND PLASTIC SURFACES TO AN EXTREMELY HIGH GLOSS (HAND APPLICATION ONLY):
KIT INCLUDES NINE REUSABLE 3" X 4" SHEETS (1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000 GRIT) PLUS A 3" X 4" FOAM SANDING BLOCK. CONSISTENTLY GRADED CRYSTAL ABRASIVES WITH AN INNER CUSHIONING LAYER ON SUPER FLEXIBLE BACKING ENSURE ONLY THE FINEST "SEE THROUGH" FINISH. TO USE, SMOOTH WORKPIECE WITH CONVENTIONAL SANDPAPER, THEN WET SAND WITH INCREASINGLY FINER GRIT MICRO-MESH TO REMOVE EVEN THE SMALLEST IMPERFECTIONS. SHEETS CLEAN UP WITH WATER, ALLOWING THEIR USE UP TO 15 TIMES LONGER THAN NORMAL ABRASIVES. CAN ALSO BE USED TO POLISH AND RESTORE "SMOKED" OR SCRATCHED PLASTIC LENSES TO OPTICAL CLARITY. REPLACEMENT SHEETS AVAILABLE IN PACKAGES OF 5.
|
|
|
|
Advanced Search Tools
Browse
will
