|
|
|
Machinery - Boring
|
DELTA® 13 SPINDLE LINE BORING MACHINE
|
| 13 Spindle Line Boring Machine
...plus other(s)
|
THE DELTA® 32-325 13 SPINDLE BORING MACHINE PROVIDES A FULL 12" OF WORK SPACE IN FRONT OF THE BORING HEAD TO HANDLE EXTRA-LARGE BOARDS:
3/4HP, 120V, 1,725 RPM, 1PH MOTOR. SEE-THROUGH SPINDLE GUARD FOR SAFETY - 10MM COLLETS, 4" THROAT CAPACITY. ADJUSTABLE DEPTH STOP CONTROLS THE 2" DOWNWARD TRAVEL. TELESCOPING HANDLE EXTENDS FROM 16" TO 23" FOR INCREASED LEVERAGE - RETRACTS WHEN NOT IN USE. FULLY ADJUSTABLE 16" X 29-3/4" TABLE AND FENCE HAVE ENGLISH AND METRIC SCALES FOR QUICK SET-UP AND ACCURATE BORING. INDEXING PINS HELP MAINTAIN CORRECT SPINDLE ALIGNMENT FOR RESUMING LINE BORING OPERATIONS IN LONG WORKPIECES. WORK STOPS ON EITHER END OF THE FENCE ALLOW YOU TO LINE UP WORK FROM THE LEFT OR RIGHT FOR PERFORMING PARALLEL BORING PATTERNS. STEEL SUPPORT STRUCTURE AND BASE - PRE-DRILLED FOR BENCH OR STAND MOUNTING (STAND SOLD SEPARATELY). 32-1/2"H X 30"W X 28-1/2"L. NET WEIGHT 98 LBS.; 125 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. USA. SEVEN RIGHT-HAND (RH) AND SIX LEFT-HAND (LH) 5MM BRADPOINT BORING BITS REQUIRED (SOLD SEPARATELY). OPTIONAL FENCE EXTENSION ADDS 30" TO EXISTING FENCE.
|
|
|
|
Machinery - Drill Presses
|
DELTA® 16-1/2" DRILL PRESS INCLUDES TWINLASER®
|
| 16-1/2" Drill Press, 1/2hp
...plus other(s)
|
DELTA® MODEL 17-950L 16-1/2" DRILL PRESS INTEGRATES A DUAL LASER POD THAT PROJECTS CROSSHAIRS ONTO THE TABLE AT THE POINT OF BIT CONTACT FOR MUCH MORE PRECISE DRILLING:
120V, 1/2HP, 1,720 RPM MOTOR; 12 SPEEDS - 250-3,000 RPM. 5/8" JACOBS® CHUCK AND KEY, 2" QUILL DIAMETER, 3-7/8" STROKE. ADJUSTABLE-POSITION LOCKING DEPTH STOP FOR ACCURATE DEPTH MEASUREMENT AND REPETITIVE DRILLING. ZERO-CLEARANCE MDF PLUNGE PLATE - 18" X 14" CAST IRON TABLE WITH T-SLOTS TILTS 0-45° FORWARD AND 0-90°, LEFT AND RIGHT. BELTS, STEP PULLEY, MOTOR CONTROL, WORK LIGHT AND INSTRUCTIONS INCLUDED. 66"H X 12-3/4"W X 25-1/4"D. NET WEIGHT 194 LBS.; 225 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
17" DRILL PRESS W/BACK FENCE
|
| 17" Drill Press W/back Fence
...plus other(s)
|
|
|
|
Machinery - Drill Presses
|
DELTA® 18" DRILL PRESS PROVIDES GREAT STOCK SUPPORT AND ACCURATE PERFORMANCE
|
| 18" Drill Press, 16-spd 3/4hp Tilt-table
...plus other(s)
|
|
OVERSIZED TABLE TILTS FORWARD 0-45° AND ROTATES LEFT/RIGHT 0-90° T-SLOTS ON TABLE FOR AUXILIARY BACK FENCE OR SHOP BUILT JIGS. REPLACEABLE PLUNGE PLATE ON TABLE FOR THROUGH DRILLING. 3/4 HORSEPOWER MOTOR PROVIDES PLENTY OF POWER. AUTO TENSIONING BELT DRIVE SYSTEM MAKES SPEED CHANGES EASY. DEPTH STOP WITH MICRO ADJUSTMENT AND INDEPENDENT DEPTH SCALE. AUTO BELT TENSIONING KEEPS MOTOR AND PULLEY IN ALIGNMENT FOR LESS VIBRATION. 6" QUILL STROKE PROVIDES EXTENDED DEPTH OF CUT. FULLY ADJUSTABLE LASER PROJECTS CROSSHAIR ON WORK PIECE. LED WORK LAMP OF FLEXIBLE GOOSENECK. LARGE NON-TIP BASE WITH FLAT MACHINED SURFACE AND ATTACHMENT SLOTS. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
WOODTEK® 21" FLOOR DRILL PRESS
|
| 21" Drill Press W/mortising Attachment
...plus other(s)
|
WITH ITS THREE SPOKE WHEEL, TILTING CAST IRON TABLE (0° TO 45°, LEFT AND RIGHT), LOCKING RACK AND PINION HEIGHT ADJUSTMENT AND QUIET, POWERFUL "V" BELT DRIVE MOTOR, THE WOODTEK® 21" FLOOR DRILL PRESS OFFERS REAL VALUE FOR MONEY SPENT:
MOTOR - 1HP, 120V, 12A, 1PH, 1,700 RPM. SPEEDS (12) - 180, 280, 300, 480, 500, 650, 1,250, 1,650, 1,700, 2,500, 2,850 AND 4,200 RPM. CHUCK - 5/8"; JT3/MT3 SPINDLE TAPER. SWING - 21-1/8". STROKE - 4-13/16". TABLE SIZE - 18-3/8" X 16-1/2". OVERALL DIMENSIONS - 68"H X 20"W X 22-1/2"D. NET WEIGHT - 326 LBS. SHIPPING WEIGHT - 346 LBS.
NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
IN ADDITION TO WOODTEK® 16-1/2" AND 21" DRILL PRESSES, MORTISING ATTACHMENT 832-294 FITS DELTA® AND CRAFTSMAN® 20" DRILL PRESSES AS WELL AS OTHERS WITH 2-15/16" COLLARS.
|
|
|
|
Machinery - Jointers & Planers
|
DELTA® 20" AND 24" PLANERS ARE DESIGNED FOR HEAVY DUTY PRODUCTION WORK
|
| 20" Planer, 5hp 3ph 200-220/440v
...plus other(s)
|
DELTA® PRODUCTION PLANERS FEATURE MICRO ADJUSTABLE BED ROLLERS WITH LEVER OPERATED DROP AWAYS. UPFRONT CONTROLS, MASSIVE GEARBOXES, CHAIN DRIVEN FEED ROLLERS AND HEAVY CAST IRON BEDS HELP ENSURE MAXIMUM PERFORMANCE:
22-450, 22-451 20" DC-580 PLANERS:
5HP, 3PH, 220-220/440V MOTOR WITH MAGNETIC STARTER AND AUTOMATIC RESET PROTECTION. 3 KNIFE CUTTERHEAD TURNS AT 5,000 RPM FOR 15,000 CPM. 20/30 FPM FEED RATE. MAXIMUM STOCK WIDTH 20"; 11/64" MINIMUM THICKNESS; 8-5/8" MAXIMUM. 22" X 28" PRECISION GROUND TABLE WITH EXTENSIONS. MICRO ADJUSTABLE BED ROLLERS WITH LEVER OPERATED DROP AWAY. UPFRONT CONTROLS, MASSIVE GEARBOX, CHAIN DRIVEN FEED ROLLERS AND HEAVY CAST IRON BED. HINGED DUST HOOD FEATURES A BUILT IN 6" DIAMETER DUST CHUTE. 32"L X 44-1/2"W X 49"H. NET WEIGHT 840 LBS.; 945 LBS. SHIPPING WEIGHT. 22-451 - SAME AS 22-450, BUT WITH A 1PH, 220V MOTOR.
22-470 24" INDUSTRIAL PLANER:
POWERFUL 7-1/2HP, 3PH, 230-220/460V MOTOR WITH MAGNETIC STARTER AND AUTOMATIC RESET PROTECTION. 24" WIDE PLANING CAPACITY - OTHER FEATURES SIMILAR TO 22-450. 36"L X 48"W X 50"H. NET WEIGHT 980 LBS.; 1,090 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED. NOTE: EACH SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.
|
|
|
|
Machinery - Jointers & Planers
|
DELTA® 13" PORTABLE PLANER FEATURES A CUTTERHEAD DESIGNED TO PRODUCE AN ULTRA SMOOTH FINISH
|
| 13" Portable Planer, 3-knife Cutterhead
...plus other(s)
|
|
DELTA® 13" PORTABLE PLANER FEATURES A 3 KNIFE CUTTERHEAD FOR MORE CUTS PER INCH AND IMPROVED SURFACE QUALITY. THE CUTTERHEAD IS DESIGNED TO EXTEND BLADE LIFE AND HAS A PATENTED LOCK SYSTEM TO HELP CONTROL SNIPE. A MICRO-ADJUST DEPTH STOP WITH A RANGE FROM 1/8" TO 1-1/4" ALLOWS THE USER TO SET AND ACCURATELY RETURN TO A DESIRED THICKNESS. A FULL WIDTH MATERIAL REMOVAL GAUGE INDICATES THE AMOUNT OF MATERIAL BEING REMOVED WITH EACH PASS. HSS INDEXED, DOUBLE-SIDED KNIVES REGISTER IN PLACE FOR EASY BLADE CHANGES. A15 AMP 120V MOTOR PROVIDES PLENTY OF POWER FOR EVEN THE MOST DEMANDING HARDWOODS. INCLUDES CUTTERHEAD WRENCH, KNIFE MAGNET, CHIP CHUTE AND OWNER'S MANUAL. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED. MOTOR: 15 A, 120V, 1 PHASE, 60 HZ SWITCH: MECHANICAL W/OVERSIZED PADDLE CUTTERHEAD DIAMETER: 2" NUMBER OF KNIVES: 3 CUTTERHEAD SPEED: 10,000 RPM TABLE SIZE: 13"X12-1/2" FEED RATE: 26 FPM MAX DEPTH OF CUT: 1/8" MAX STOCK WIDTH: 13" MIN STOCK THICKNESS: 1/8" MAX STOCK THICKNESS: 6" MIN STOCK LENGTH: 10" FEED ROLLERS: NITRILE RUBBER DUST PORT: 4" HEIGHT: 19.5" DEPTH: 14" WIDTH: 22" NET WEIGHT: 76 LBS. SHIPPING WEIGHT" 80 LBS.
|
|
|
|
Machinery - Jointers & Planers
|
DELTA® X5™ PLANER PROCESSES STOCK TO UNIFORM THICKNESS AND A SMOOTH SURFACE
|
| X5 15" Planer, 3hp, 1ph, 230v
...plus other(s)
|
HANDLES LONG STOCK WITH EASE, BECAUSE THE BED ALWAYS REMAINS LEVEL WITH THE FOLD-DOWN EXTENSION ROLLERS. SIDE-TO-SIDE PARALLELISM IS ENSURED BY A PATENTED CUTTER HEAD ADJUSTMENT SYSTEM THAT IS EASY TO ACCESS AND USE. TWO FEED RATES (15 & 30 FPM) ALLOW YOUR TO QUICKLY SIZE STOCK OR MAKE SMOOTH FINISH PASSES. THREE-KNIFE CUTTER HEAD HAS JACK SCREW ADJUSTMENT FOR EASY KNIFE CHANGES. CHIP CHUTE WITH 4" OR 5" DUST PORT. FIVE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS MOTOR 3HP, 1PH. VOLTAGE 230V. CUTTER HEAD:
DIAMETER 3"
KNIVES THREE
SPEED 5000 RPM FEED RATES 15 & 30 FPM. MAX. CUT DEPTH 1/8". DUST PORTS 4" OR 5". NET WEIGHT 400 LBS. SHIPPING WEIGHT 488 LBS.
|
|
|
|
Machinery - Jointers & Planers
|
22-790X + 37-275X W/FREE 14-651 MORTISER
|
| 22-790x + 37-275x W/free 14-651 Mortiser
...plus other(s)
|
|
|
|
Machinery - Jointers & Planers
|
DELTA® 12" JOINTER HAS HUGE CAPACITY AND EASY, PRECISE SET UP
|
| Dj30 12" Jointer 3hp 3ph 220/440v
...plus other(s)
|
WITH ITS CENTER MOUNTED FENCE AND RACK AND PINION MECHANISM, THE DELTA® MODEL 37-360, DJ-30 12" JOINTER ALLOWS FOR PRECISE ADJUSTMENTS:
220/440V, 3HP, 3PH MOTOR; 5,000 RPM, 3-7/8" DIA. CUTTERHEAD PRODUCES 15,000 CPM. MAXIMUM 12" CUTTING WIDTH, 3/4" CUTTING DEPTH AND 3/4" RABBETING CAPACITY. VERSATILE 5-1/2" X 47" FENCE TILTS IN AND OUT 45°; POSITIVE STOPS AT 45° AND 90°. 41-1/2"L X 13"W INFEED AND OUTFEED TABLES HAVE TABLE BED RAISING AND LOWERING LEVERS; ENGLISH/METRIC FOR MEASURING CUTTING DEPTH. INFEED AND OUTFEED TABLES ARE CAST IRON AND HEAVILY RIBBED UNDERNEATH FOR SOLID SUPPORT. PARALLELOGRAM SUPPORT SYSTEM ALLOWS TABLE TO MOVE UP OR DOWN IN SAME ARC AS CUTTERHEAD. BUILT IN 5" DUST CHUTE. INCLUDES THREE KNIVES, CUTTERHEAD ASSEMBLY AND GUARD, WRENCHES, RABBETING LEDGE, PUSH BLOCKS AND INSRUCTION MANUAL. 43"H X 84"L X 40"W. WEIGHS 706 LBS.
37-361 - SIMILAR TO 37-360 BUT WITH 220V, 3HP, 1 PH MOTOR.
TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
DELTA X5™ AND INDUSTRIAL 8" JOINTERS ARE AS DURABLE AS THEY ARE ACCURATE
|
| X5 Dj20 8" Jointer 1-1/2hp 1ph
...plus other(s)
|
WITH ITS CENTER LOCKING FENCE AND PARALLELOGRAM BED DESIGN, THE DELTA X5™ MODEL 37-365X 8" DJ20 PRECISION JOINTER (SHOWN) PROVIDES HIGH QUALITY CUTS - TIME AFTER TIME:
120/240V, 1-1/2HP, 1PH, 3,450 RPM TEFC MOTOR. 5,500 RPM, 16,500 CPM THREE KNIFE (3-3/8" DIA.) CUTTERHEAD. 8" CUTTING WIDTH, 5/8" DEPTH, 5/8" RABBETING. 76-1/2" TABLE - 32" REAR, 42" FRONT. 5" X 35" FENCE TILTS IN AND OUT 45° WITH POSITIVE 45° AND 90° IN AND OUT STOPS. INCLUDES ENCLOSED STAND, DUST COLLECTOR CONNECTOR, RABBETING LEDGE, CUTTERHEAD GUARD WITH WRENCHES, PUSH BLOCKS, TWO PULLEYS AND INSTRUCTIONS. 32"H X 26"D X 76-1/2"W. NET WEIGHT 394 LBS.; 534 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY! THE SIMILARLY EQUIPPED DELTA® INDUSTRIAL MODEL 37-350A DJ-20 8" PRECISION JOINTER COMES WITH A TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
TP-305 12-1/2" PLANER + 22-562 KNIVES
|
| Tp-305 12-1/2" Planer + 22-562 Knives
...plus other(s)
|
|
|
|
Machinery - Jointers & Planers
|
DELTA X5™ 8" PRECISION JOINTER - FLAT AND STRAIGHT EVERY TIME
|
| 37-365x Dj20 Jointer W/ Free Mobile Base
|
WITH ITS CENTER LOCKING FENCE AND PARALLELOGRAM BED DESIGN, THE DELTA X5™ MODEL 37-365X 8" DJ20 PRECISION JOINTER PROVIDES HIGH QUALITY CUTS - TIME AFTER TIME:
120/240V, 1-1/2HP, 1PH, 3,450 RPM MOTOR. 5,500 RPM, 16,500 CPM THREE KNIFE (3-3/8" DIA.) CUTTERHEAD. 8" CUTTING WIDTH, 5/8" DEPTH, 5/8" RABBETING. 76-1/2" TABLE - 32" REAR, 42" FRONT. 5" X 35" FENCE TILTS IN AND OUT 45° WITH POSITIVE 45° AND 90° IN AND OUT STOPS. INCLUDES ENCLOSED STAND, DUST COLLECTOR CONNECTOR, RABBETING LEDGE, CUTTERHEAD GUARD WITH WRENCHES, PUSH BLOCKS, TWO PULLEYS AND INSTRUCTIONS. 32"H X 26"D X 76-1/2"W. NET WEIGHT 394 LBS.; 534 LBS. SHIPPING WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
SHOPMASTER™ 6" VARIABLE SPEED JOINTER GIVES YOU BIG CAPACITY IN THE SHOP OR AT THE JOBSITE
|
| Jt-160 6" Bench Jointer W/free Knives
...plus other(s)
|
THE DELTA® SHOPMASTER™ JT-160 6" VARIABLE SPEED BENCH JOINTER USES A POLY V-BELT FOR MAXIMUM POWER TRANSMISSION WITH MINIMUM BELT SLIPPAGE:
120VAC, 1PH, 10A, 6,000 TO 11,000 RPM MOTOR. 2 KNIFE CUTTERHEAD - 12,000 TO 22,000 CPM. 4-1/4" X 19-3/4" FENCE TILTS 0-45° OUT; POSITIVE STOPS AT 45° AND 90°. 6-1/8" MAXIMUM CUT WIDTH. 1/8" MAXIMUM CUT DEPTH. 6-3/16" X 30" TABLE. INCLUDES CUTTERHEAD GUARD, PUSH BLOCKS AND INSTRUCTION MANUAL. 13-1/2"H X 30"W X 18"D. 33 LBS. NET WEIGHT; 35 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
SHOPMASTER® 12-1/2" PLANER COMBINES DELTA® PERFORMANCE WITH AN ECONOMICAL PRICE
|
| 12-1/2" Planer
...plus other(s)
|
THE DELTA® SHOPMASTER™ TP-305 PLANER 12-1/2" PORTABLE PLANER FEATURES REVERSIBLE HIGH SPEED STEEL DOUBLE-EDGED KNIVES FOR TWICE THE CUTTING LIFE, PULLEY CUTTERHEAD DRIVE WITH RUGGED GEARBOX/CHAIN AND SPROCKET FEED ROLL DRIVE FOR MAXIMUM POWER TRANSMISSION:
120V, 15A, 1PH MOTOR - 8,000 RPM/16,000 CPM, 26.2 FPM. PATENTED LOCK STABILIZES 2" DIA. CUTTERHEAD FOR RIGIDITY AND SUPERIOR SNIPE CONTROL. 12-1/2" MAXIMUM STOCK WIDTH; 3/16" CUT DEPTH. 6" MAXIMUM STOCK THICKNESS; 12" MINIMUM LENGTH, 3/16" MINIMUM THICKNESS. ADJUSTABLE INFEED/OUTFEED TABLES AND CONVENIENT WOOD RETURN ROLLER. EASY TO READ ENGLISH/METRIC SCALES FOR FASTER SETTINGS. INTEGRAL HANDLES FOR EASIER CARRYING. INCLUDES KNIVES, POLY V-BELT, DUST CHUTE, ELEVATION CRANK, KNIFE SETTING GAUGE, BLADE WRENCH AND INSTRUCTION MANUAL. 15"H X 20-1/2"W X 23-3/4"D. NET WEIGHT 62 LBS.; SHIPPING WEIGHT 69 LBS. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Lathes
|
DELTA® 12" MIDI-LATHES
|
| Delta 12" 5-spd Midi Lathe, 3/4hp
...plus other(s)
|
DESIGNED FOR TURNING BOWLS AS WELL AS PENS, SPINDLES AND BOXES, THE NEW DELTA® 12" MIDI-LATHES NOW HAVE ENOUGH THE HORSEPOWER, SWING AND BELT GRIP FOR MOST TYPES OF WOODTURNING. TWO MODELS ARE AVAILABLE: 3/4HP, 5-SPEED MODEL 46-455 AND THE 1HP, VARIABLE SPEED MODEL 46-460. THESE ARE THE FIRST MIDI LATHES TO OFFER BOTH FORWARD AND REVERSE DRIVE ROTATIONS THROUGH A REVERSIBLE DC DRIVE. FEATURES INCLUDE ALL CAST IRON CONSTRUCTION, 6-GROOVE POLY-V BELT DRIVE, LOCKING FACEPLATE FOR REVERSE SANDING OPERATIONS AND A PATENTED QUICK-CHANGE BELT TENSIONING SYSTEM:
LATHE INCLUDES 6" AND 10" TOOL RESTS, 3" FACE PLATE, SPUR DRIVE, LIVE CENTER, KNOCKOUT ROD, FACEPLATE WRENCH AND INSTRUCTION MANUAL. OPTIONAL 25-1/2" BED EXTENSION BRINGS DISTANCE BETWEEN CENTERS TO 42". TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
DELTA® 46-455 LATHE. MOTOR: 3/4 HP, 115VAC, 1PH. FIVE SPEEDS: 500, 950, 1240, 1,550, 2,700, 4,000 RPM.
DELTA® 46-460 LATHE. MOTOR: 1 HP, 115VAC, 1PH. VARIABLE SPEED RANGES (3): 250-700, 600-1,800, 1,350-4,000.
SPECIFICATIONS:
SWING OVER BED - 12-1/2" (9-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 16-1/2" (42" W/BED EXTENSION). HEADSTOCK SHAFT: 1"-8TPI, #2MT, 15/32" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2-1/4" TRAVEL, #2MT, 13/32" BORE. NET WEIGHT - 97 LBS. OVERALL DIMENSIONS - 36"W X 11"D X 17-3/4"H.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
DELTA LIVE CENTER SYSTEM - 46-490. HIGH SPEED STEEL TURNING TOOLS - 142-607. POWDER METAL TURNING TOOLS - 137-093. CARBON STEEL TURNING TOOLS - 873-826. ONEWAY TALON CHUCK - 959-627. NOVA G3 CHUCK - 962-546. WOODCUT BOWL SAVER - 140-504. VEGA MIDI LATHE DUPLICATOR - 139-424.
|
|
|
|
Machinery - Mortisers
|
DELTA® HOLLOW CHISEL MORTISER INCLUDES CHISELS AND BITS
|
| Deluxe Mortising Machine
...plus other(s)
|
HEAVY, CAST IRON AND STEEL FOR RIGIDITY AND STABILITY, THE DELTA® INDUSTRIAL MODEL 14-651 DELUXE MORTISER COMES WITH 1/4", 5/16", 3/8" AND 1/2" DELTA® CHISELS AND BITS:
120VAC, 1/2 HP, 4.8A, 1PH, 1,750 RPM INDUCTION MOTOR - 3/8" CHUCK WITH KEY. 5" MAXIMUM STROKE; UNIQUE, GAS-FILLED HEAD STABILIZER. 9-3/8" UNDER HEAD TO BASE, 3-3/4" UNDER HOLDDOWN. INCLUDED RISER BLOCK ADDS 1-3/4" CAPACITY UNDER HEAD. EASY, OPEN ACCESS TO DRILL CHUCK FOR BIT CHANGING. 12-1/4" X 8-1/4" CAST IRON TABLE WITH THROUGH HOLE; 16-1/4" X 13-1/2" BASE. RACK & PINION ADJUSTABLE 2-15/16" X 5-13/16" FENCE (EACH SIDE), 13-5/8" OVERALL. MORTISING HEAD CAN TURN 180° FOR OFF TABLE MORTISING. MULTI-POSITION FEED LEVER. PRE-DRILLED BASE FOR BENCH MOUNTING. TOOL AND CHISEL TRAY AND INSTRUCTION MANUAL INCLUDED. 30"H X 13-1/2"W X 16-1/4"D OVERALL. NET WEIGHT 55 LBS.; 77 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
REPLACEMENT MORTISE CHISELS HAVE 5/8" CHISEL SHANKS: 17-908 - 1/4" MORTISE, 1-7/8" CUT DEPTH; 4-1/4"L CHISEL, 6-1/8"L BIT. 17-909 - 5/16" MORTISE, 1-7/8" CUT DEPTH; 4-1/4"L CHISEL, 6-1/8"L BIT. 17-910 - 3/8" MORTISE, 3" CUT DEPTH; 5-1/2"L CHISEL, 7-1/8"L BIT. 17-911 - 1/2" MORTISE, 3" CUT DEPTH; 5-1/2"L CHISEL, 7-1/8"L BIT.
|
|
|
|
Machinery - Radial Arm Saws
|
DELTA® 18", 16" AND 14" RADIAL ARM SAW "TURRET ARM" CONSTRUCTION LETS SAWBLADE ROTATE FULL 360° ABOVE TABLE
|
| 14" Radial Saw, 5hp, 3ph, 230/460v
...plus other(s)
|
DELTA® 18", 16" AND 14" INDUSTRIAL RADIAL ARM SAWS FEATURE LIFETIME, TRACK RODS WITH GLASS SMOOTH HARDENED SURFACES TO MINIMIZE ROLLER FRICTION. ALL MODELS FEATURE:
TEFC, 3,450 RPM MOTORS WITH ELECTRIC BRAKE; 1" ARBOR. 29" X 1" DEEP MAXIMUM CROSSCUT CAPACITY; 22" 45° RIGHT AND LEFT MITER; 41" MAXIMUM OUT RIP. 0°, 30°, 45°, 60° AND 90° BEVEL STOPS; 90° AND 45°, RIGHT AND LEFT, MITER STOPS. UPFRONT OPERATING CONTROLS INCLUDING BLADE ELEVATING CRANK. 44" X 36-1/2" TABLE; 76"H OVERALL. CUTTERHEAD RETURN AUTOMATICALLY PULLS THE CUTTERHEAD BEHIND THE FENCE. INCLUDE BLADE GUARD WITH ANTI-KICKBACK ATTACHMENT, RETRACTABLE LEAF GUARD, COMBINATION SAW BLADE, CUTTERHEAD CLAMP KNOB, ADJUSTABLE CROSSCUT STOP, STEEL LEGS AND INSTRUCTION MANUAL.
33-421 - 18" MODEL 33-421: 7-1/2HP, 230/460V, 3PH MOTOR. 4-7/8" MAXIMUM CUT DEPTH AT 90°. 6-1/16" MAXIMUM CUT DEPTH AT 90° WITHOUT LEAF GUARD. 3" MAXIMUM 45° BEVEL CUT DEPTH. WEIGHS 745 LBS.
33-420 - 18" MODEL 33-420: SAME AS 33-421 BUT WITH 5HP, 230V, 1PH MOTOR.
33-411 - 16" MODEL 33-411: 5HP, 230/460V, 3PH MOTOR. 4-1/2" MAXIMUM CUT DEPTH AT 90°. 5-1/16" MAXIMUM CUT DEPTH AT 90° WITHOUT LEAF GUARD. 2-1/8" MAXIMUM 45° BEVEL CUT DEPTH. WEIGHS 740 LBS.
33-410 - 16" MODEL 33-410: SAME AS 33-411 BUT WITH 3HP, 230V, 1PH MOTOR.
33-401 - 14" MODEL 33-401: 5HP, 230/460V, 3PH MOTOR. 4" MAXIMUM CUT DEPTH AT 90°. 4-1/16" MAXIMUM CUT DEPTH AT 90° WITHOUT LEAF GUARD. 3/4" MAXIMUM 45° BEVEL CUT DEPTH. WEIGHS 725 LBS.
33-400 - 14" MODEL 33-400: SAME AS 33-401 BUT WITH 3HP, 230V, 1PH MOTOR.
|
|
|
|
Machinery - Radial Arm Saws
|
DELTA® 10" AND 12" RADIAL ARM SAWS CROSS CUT, BEVEL, MITER AND DADO
|
| 10" Radial Arm Saw, 1-1/2hp, 120/240v
...plus other(s)
|
|
|
|
Machinery - Sanders
|
DELTA 12" SANDER AND 3 ZIRCONIA DISCS
|
| Delta 12" Sander And 3 Zirconia Discs
...plus other(s)
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
