|
|
|
Machinery Accessories - Band Saws
|
STEEL CITY™ 14" BAND SAW HAS 2 SPEEDS AND COMES WITH LOADS OF CONVENIENT FEATURES
|
| Rip Fence For 14" Band Saw
...plus other(s)
|
|
|
|
Machinery Accessories - Band Saws
|
JET® 14" BAND SAWS
|
| Rip Fence For Jet 14" Band Saw
...plus other(s)
|
WITH ALL OF ITS FEATURES, THE JET® JWBS-14CS (708115K) 14" CLOSED STAND WOODWORKING BAND SAW WILL BE A WELCOME ADDITION TO YOUR SHOP:
1HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. MICRO ADJUSTABLE BLADE GUIDE WITH GRAPHITE IMPREGNATED JET BLOCKS™ FOR SMOOTHER RUNNING. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 15" X 15" CAST IRON TABLE TILTS 45°R AND 10°L. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. SIMILAR JWBS-14MW (708116K) 14" CLOSED STAND METALWORKING BAND SAW FEATURES THREE SPEEDS (735, 1,470, 2,350 SFPM) FOR NON-FERROUS METAL AND WOODWORKING APPLICATIONS. 68"H X 26"W X 19"D. 185 LBS. NET WEIGHT; 200 LBS. SHIPPING WEIGHT. JWBS-14OS (708113A) 14" OPEN STAND WOODWORKING BAND SAW FEATURES: 3/4HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 14" X 14" CAST IRON TABLE TILTS 45°R AND 15°L. 16GA STEEL STAND - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. 68"H X 24"W X 26-1/2"D. 172 LBS. NET WEIGHT; 187 LBS. SHIPPING WEIGHT.
5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
ADD RIP FENCE ACCURACY TO YOUR DELTA® 14" BANDSAW
|
| Band Saw Rip Fence, 24" Rails
...plus other(s)
|
A GENUINE DELTA® MODEL 28-858 24" RIP FENCE MOUNTS DIRECTLY ONTO THE TABLE AND CAN BE THE MOST VALUABLE ACCESSORY YOU CAN ADD TO YOUR DELTA® 14" BANDSAW:
USE THE FENCE AND SAW TO PREPARE STOCK FOR TURNING, SPLIT DOWELS, RIP BEVELS, RIP EXTRA THICK STOCK, RESAW ACCURATELY AND MUCH MORE. INCLUDES STURDY ALUMINUM BODY, REMOVABLE PIVOT BAR FOR FREEHAND RESAWING, GUIDE RAILS AND MOUNTING HARDWARE. WEIGHS 15 LBS. 28-856 - HAVING SIMILAR FEATURES, THIS SMALLER DELTA® RIP FENCE (NOT SHOWN) IS 12" LONG BUT ALSO FITS 14" BANDSAWS. WEIGHS 12 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Jigs And Fixtures
|
ANGLE°PERFECT III™ WITH ZERO CLIP™
|
| Angle Perfect Iii With Zero Clip
|
AP-3 ANGLE°PERFECT III™ WITH ZERO CLIP™ IS THE ONLY MEASUREMENT TOOL YOU'LL NEED TO SET UP THE SIX CRITICAL ELEMENTS OF TABLESAW ALIGNMENT, PLUS IT IS IDEAL FOR ENSURING JOINTER BLADES ARE EXACTLY LEVEL:
WHEN PUT INTO CONTACT WITH THE SAWBLADE, THE BUILT-IN LED LIGHTS WHEN PERFECT CUTTING ANGLES ARE SET. A SIMILAR APPROACH DETERMINES IF RIP FENCES OR MITER GAUGES NEED ALIGNMENT. ZERO CLIP™ ALLOWS THE SAME PRECISION WHEN SETTING JOINTER KNIVES. SIMPLY PLACE THE MAGNETIC BASE ONTO THE FEED TABLE, ROCK THE CUTTERHEAD AND READ THE LED. INCLUDES 3V BATTERY AND COMPLETE INSTRUCTIONS. 2-1/8"H X 2"W X 7-1/2"L; 12.8 OZ. ONE-YEAR MANUFACTURER'S WARRANTY. USA.
IF YOU ARE INTERESTED IN THIS TOOL, YOU MIGHT BE INTERESTED IN:
ANGLE°PERFECT III™ & BLADEGAUGE III™ COMBO KIT - 147-875.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
FINE TUNE YOUR TOOLS TO 0.001" ACCURACY WITH THE RED-LINE X POINT POWER TOOL SETUP GAUGE
|
| X-point Power Tool Setup Gauge
|
NOW YOU CAN ALIGN ALL OF THE COMPONENTS OF STATIONARY POWER TOOLS SO THEY CUT SMOOTHLY, QUIETLY AND WITH PERFECT ACCURACY. WITH THE RED-LINE X POINT POWER TOOL SETUP GAUGE YOU CAN TEST THE FLATNESS OF TABLESAW BLADES, CHECK TABLESAW ARBOR RUNOUT, ALIGN BLADE AND RIP FENCES WITH MITER SLOTS, SET MITER GAUGE ANGLES, MEASURE DRILL PRESS SPINDLE RUNOUT, SQUARE DRILL PRESS TABLE TO SPINDLE, SET JOINTER KNIVES AND CHECK BANDSAW TABLES FOR SQUARENESS TO THE BLADE:
THREE POINT BEARING GUIDES ENSURE A "SLOP FREE" FIT IN MITER GAUGE SLOTS; TWO POWERFUL RARE EARTH MAGNETS HOLD THE BASE TIGHT TO TOOL SURFACE, WHILE BASE LEVELING SCREWS ENSURE SQUARENESS TO TOOL SURFACES. SOLID ALUMINUM WITH PRECISION, EASY TO READ ANALOG DIAL INDICATOR. COMPLETE INSTRUCTIONS AND MOLDED PROTECTIVE CASE INCLUDED.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
LONG WEARING, SLIPPERY UHMW MAKES GREAT JIGS AND FIXTURES...MACHINES LIKE WOOD
|
| 1/8"x4"x48"" Uhmw Strip
...plus other(s)
|
ULTRA HIGH MOLECULAR WEIGHT (UHMW) PLASTIC IS DENSE, VERY SLIPPERY AND TREMENDOUSLY DURABLE - AVAILABLE IN SIZES AND SHAPES TO FIT YOUR SPECIFIC NEEDS:
1/8", 1/4", 3/8" AND 1/2" THICK PIECES MAKE GREAT AUXILIARY FENCES. 3/4" MATERIAL WORKS WELL FOR MAKING FIXTURE AND JIG RUNNERS AND CUTOUTS. 3/8" X 3/4" PIECE CAN BE USED AS A MITER GAUGE SLOT RUNNER (MIGHT REQUIRE FINAL FITTING). 813-784 - SELF ADHESIVE UHMW WEARSTRIP CAN BE APPLIED TO MACHINE FENCES, TOOL BOTTOM PLATES OR BASE PLATES. UHMW MACHINES JUST LIKE WOOD, EXCEPT IT HAS A TENDENCY TO CLOG FINE COUNTERSINKS. USA.
|
|
|
|
Machinery Accessories - Table Saws
|
MITER GAUGE TAKES ACCURACY TO A NEW LEVEL
|
| Osborne Precision Miter Gauge
|
THE OSBORNE EB3 MITER GAUGE, FROM EXCALIBUR, FEATURES A UNIQUE, ROCK SOLID TRIANGULAR DESIGN, ACCURATE WITHIN 1/30° RIGHT OUT OF THE BOX - QUICKLY CHANGEABLE FOR LEFT- OR RIGHT-HAND OPERATION:
21" LONG GUIDE BAR HAS EXPANSION SLOTS FOR A PERFECT FIT IN ANY 3/8" X 3/4" MITER GAUGE SLOT AND A REMOVEABLE T-SLOT WASHER. EXTRUDED ALUMINUM FENCE HAS ABRASIVE FACE, ELIMINATING LATERAL WORKPIECE MOVEMENT DURING CROSSCUTS. 41" CAPACITY TO SLIDING STOP - STOPS FLIPS OUT OF THE WAY WHEN NOT IN USE. NINE PRESET LOCATIONS - ±45°, 30°, 22.5°, 15° AND 0°. INCLUDES SELF ADHESIVE MEASURING SCALE AND NON-SLIP SELF ADHESIVE STRIP FOR FRONT FACE OF THE FENCE AND FENCE EXTENSION. LIFETIME MANUFACTURER'S WARRANTY.
|
|
|
|
Machinery Accessories - Table Saws
|
HIGHLY ACCURATE, ELECTRONIC WAY TO SET UP YOUR TABLESAW
|
| Angle Perfect Ii
|
ANGLE°PERFECT II™ IS THE ONLY MEASUREMENT TOOL NEEDED TO SET UP THE CRITICAL ELEMENTS OF TABLESAW ALIGNMENT:
WHEN PUT INTO CONTACT WITH A SAWBLADE, A BUILT-IN LED LIGHTS WHEN PERFECT 90° OR 45° CUTTING ANGLES ARE SET. A SIMILAR APPROACH DETERMINES IF SAWBLADES, RIP FENCES OR MITER GAUGES NEED ALIGNMENT; THE LED LIGHTS TO INDICATE WHEN PROPER ADJUSTMENTS HAVE BEEN MADE. MAGNETIC BASE FOR STABILITY AND HANDS-FREE USE. INCLUDES 3V LITHIUM BATTERY AND COMPLETE INSTRUCTIONS. 7L X 2H X 2W; 10-1/2 OZ. ONE-YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Table Saws
|
FEED WORK PARALLEL TO THE SAWBLADE AND ELIMINATE BARE HAND FEEDING WITH GRR-RIPPER®
|
| Grr-ripper Table Saw Push Block System
|
GRR-RIPPER® GRR-200 IS A HAND TOOL THAT GRIPS BOTH SIDES OF STOCK DURING CUTTING OPERATIONS, MAINTAINING BALANCED PARALLEL FEEDING, GREATLY INCREASING THE ACCURACY OF CUTS AND ELIMINATING BURNING AND KICKBACK:
STOCK IS COMPLETELY ENCLOSED AS IT PASSES ALONG THE RIP FENCE TOWARDS THE BLADE, PROTECTING HANDS AND FINGERS FROM CUTTING EDGES. MULTIPLE GROOVED, NON-SLIP PADS PROVIDE SUPERIOR GRIPPING - 8 ADJUSTABLE/DETACHABLE COMPONENTS CAN BE USED ON TABLESAWS, ROUTER TABLES, SHAPERS OR JOINTERS. USE FOR RESAWING, AS A PUSH BLOCK, CUSTOM JIG, HOLD DOWN, SPLITTER, NAVIGATOR OR ANY OF MANY OPTIONS - FULLY ADJUSTABLE. COMPLETE INSTRUCTIONS INCLUDED. ONE YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Table Saws
|
NEW BOSCH 10" PORTABLE JOBSITE TABLE SAWS ARE LIKE HAVING A SHOP ON LOCATION
|
| 10" Portable Table Saw W/o Stand
...plus other(s)
|
POWERED BY CONSTANT RESPONSE™ CIRCUITRY WITH A SOFT START, 4.4HP, 120V, 1PH, 15A, 3,650 RPM BOSCH 4100-SERIES 10" TABLE SAWS ARE JOBSITE PROVEN WITH A SUPER-DURABLE SUB-BASE COMPLETE WITH INTEGRATED CARRYING HANDLES FOR QUICK AND EASY TRANSPORT:
25" RIP CAPACITY, 3-1/8" CUT DEPTH AT 90°, 2-1/2" AT 45°; -2° TO 47° BEVEL ANGLE RANGE. 5/8" LOCKING ARBOR. 29" HIGH W/21-1/2" SQUARE TABLE. ON BOARD FENCE STORAGE, MITER GAUGE AND 40-TOOTH PREMIUM BLADE INCLUDED. 60 LBS. NET WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
4100 JOBSITE TABLE SAW COMES WITH SQUARE-LOCK™ RIP FENCE AND SMART GUARD SYSTEM. 4100-09 JOBSITE TABLE SAW INCLUDES SQUARE-LOCK™ RIP FENCE, SMART GUARD SYSTEM AND GRAVITY-RISE™ WHEELED STAND. 4100DG-09 JOBSITE TABLE SAW INCLUDES DIGITAL SQUARE-LOCK™ RIP FENCE, SMART GUARD SYSTEM AND GRAVITY-RISE™ STAND.
DIGITAL FENCE INCORPORATES HIGH-VISIBILITY LCD GAUGE AND DISPLAY. ACCURATE TO 1/64" OR 0.010", WHILE OFFERING READOUTS IN 1/8", 1/16" AND 1/32" INCREMENTS AND METRIC WITHIN 0.5MM. SMART GUARD SYSTEM CONSISTS OF BLADE GUARD, RIVING KNIFE AND ANTI-KICKBACK PAWLS. ALL THREE ARE MODULAR AND TOOL FREE AND CAN BE REMOVED QUICKLY AND EASILY BASED UPON THE TASK. GRAVITY-RISE™ STAND HAS 8" DIA. PNEUMATIC WHEELS FOR EASY JOBSITE MOBILITY.
|
|
|
|
Machinery Accessories - Table Saws
|
TAPERING JIG FOR TABLE SAW
|
| Tapering Jig
|
USING A WOODTEK® TAPER JIG ENSURES COMPLETE CONTROL OF ANGLED CUTS ON RADIAL ARM, BAND OR TABLE SAWS:
24" LONG ALUMINUM JIG CONVERTS TO RIGHT- OR LEFT-HAND USE AND ADJUSTS UP TO 15° (3" PER FOOT). JIG RIDES AGAINST SAW FENCE - USE IS SIMILAR TO EVERYDAY RIPPING. EASY-TO-READ SCALE MAKES ADJUSTMENTS QUICK AND SIMPLE. WORKS WITH DADO AND MOLDING HEADS, TOO. EASY TO ASSEMBLE - ALL HARDWARE INCLUDED. IMPORTED."
|
|
|
|
Machinery Accessories - Table Saws
|
INCRA® 18" MITER SLIDER
|
| Incra 18" Miter Slider & Plans
|
THE INCRA® 18" MITER SLIDER HAS AN ALUMINUM RUNNER THAT ADJUSTS FOR PERFECT SLIDING ACTION IN ANY 3/4" X 3/8" MITER SLOT. OR, IT CAN BE LOCKED INTO PLACE FOR OTHER OPERATIONS. WON'T WARP, SHRINK OR SWELL LIKE WOODEN RUNNERS. FREE, ILLUSTRATED PLANS SHOW HOW TO BUILD A VARIETY OF SHOP MADE TABLESAW JIGS. USA. PLANS INCLUDE:
CROSSCUT BOX - BOX FIRMLY SUPPORTS STOCK OFF OF TABLE SURFACE FOR SMOOTH CUTS, WHILE MAINTAINING PERFECTLY SQUARE CUTS. MITER JIG - JIG GUARANTEES ACCURATE AND REPEATABLE 45° CUTS WITHOUT INCONVENIENCE OF SETTING UP MITER GAUGE, TILTING THE BLADE OR TRIAL AND ERROR CUTS. FEATHER BOARD - FEATHER BOARD LOCKS INTO MITER SLOT TO HOLD STOCK FIRMLY AGAINST RIP FENCE.
|
|
|
|
Machinery Accessories - Table Saws
|
INCRA® TS-III FENCE SYSTEM
|
| Micro-adjust Table Saw Fence
|
GET MACHINE SHOP ACCURACY WITH AN INCRA® TS-III TABLESAW FENCE (SHOWN WITH TWO OPTIONAL ROUTER TABLE EXTENSION WINGS AND STAINLESS STEEL SCALE). PATENTED SAWTOOTH RACKS POSITION WORK INSTANTLY AND AUTOMATICALLY TO WITHIN 0.002". RETURN TO ANY FORMER POSITION IN LESS THAN 5 SECONDS WITH ZERO ERROR. MICRO ADJUSTABLE TO 0.001". POSITIONING RANGE 32" RIGHT OF BLADE, 16" LEFT OF BLADE. BECAUSE OF ITS STRUCTURAL DESIGN, CENTRALLY PLACED CARRIAGE AND OPTIMIZED SIDE MOUNTED CLAMPING SYSTEM, THE ENTIRE UNIT VIRTUALLY WELDS ITSELF TOGETHER INTO ONE SOLID BLOCK OF STEEL AND ALUMINUM WHEN LOCKED INTO PLACE. USA. INCLUDES:
36" EXTRUDED ALUMINUM RIP FENCE W/31" RANGE. 72" RAIL SYSTEM. INCRA® JIG ULTRA 32 (WITH MICRO ADJUST KNOB AND QUICK ACTION CAM CLAMP). MOUNTING BRACKETS, HARDWARE AND INSTALLATION MANUAL.
THE INCRA® TS-III IS PRECUT TO FIT ALMOST ANY 10" TABLESAW, 27"-28" FRONT TO BACK, WITH NO DRILLING, TAPPING OR MODIFICATIONS.
|
|
|
|
Machinery Accessories - Table Saws
|
PRECISELY SET UP YOUR MACHINERY TO OPERATE MUCH MORE ACCURATELY
|
| Master Plate
...plus other(s)
|
USING YOUR MACHINE'S OPERATING MANUAL, AN ENGINEER SQUARE AND MASTERPLATE™, YOU CAN ALIGN, CALIBRATE, TUNE AND TROUBLESHOOT TABLE, RADIAL, SLIDING COMPOUND MITER AND CHOP SAWS LIKE AN EXPERT:
956-759 - MASTERPLATE™ IS A 6" X 10" X 1/4" BLACK ANODIZED SOLID ALUMINUM PLATE, PRECISION GROUND TO WITHIN THOUSANDTHS OF AN INCH FOR FINE TUNING: SUBSTITUTE IT FOR YOUR SAWBLADE AND USE THE 10" FLAT SURFACE TO ALIGN PARALLEL TO MITER SLOTS. MOUNTED VERTICALLY, YOU HAVE ALMOST 7" OF HEIGHT TO SQUARE TO THE TABLE TOP. SET MITER AND BEVEL ANGLES BEFORE REINSTALLING THE BLADE. WORKS WITH ALL 5/8" AND 1" SAW ARBORS. USA. ENGINEER SQUARE NOT INCLUDED.
956-766 - FOR EVEN GREATER ACCURACY, THE OPTIONAL SUPERBAR™ - DESIGNED TO WORK WITH MASTERPLATE™ - USES A UNIQUE, PATENT PENDING ADJUSTMENT SYSTEM TO ENSURE GLASS SMOOTH ACTION - CHECK SAW ARBOR SHAFT FOR RUN OUT, RIP FENCE FOR WARPAGE, SAW FLANGE FOR RUN OUT AND ALIGN SAW BLADE PARALLEL TO MITER SLOT: DIAL INDICATOR ACCURATE TO 0.001" - MOLDED PLASTIC BODY, WITH LIFETIME GUARANTEE, FITS STANDARD 3/4" X 3/8" MITER SLOTS AND SEARS® 0.740" SLOT MODELS. INCLUDES 1" AND 2" STAINLESS STEEL EXTENSION STEMS, TWO 1/4" DIA. OUTRIGGER STABILIZING RODS, HEX WRENCHES AND COMPLETE INSTRUCTIONS. USA (DIAL IMPORTED). MASTERPLATE™ NOT INCLUDED.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
6" PRECISION ENGINEER SQUARE - 801-456.
|
|
|
|
Machinery Accessories - Table Saws
|
WORK FASTER, WORK SAFER WITH BIESEMEYER® 30" COMMERCIAL SAW FENCE SYSTEM
|
| 30" Biesemeyer Commercial Fence
...plus other(s)
|
RUGGEDLY CONSTRUCTED USING 9-PLY FINLAND BIRCH AND HIGH IMPACT LAMINATES HAND FITTED TO SOLID STEEL TUBING AND ANGLE IRON MOUNTING RAIL, BIESEMEYER® COMMERCIAL FENCE SYSTEMS FEATURE HAIRLINE POINTERS AND BUILT-IN TAPE MEASURES FOR PRECISE, REPEATABLE SET UPS:
BC50 COMMERCIAL FENCE SYSTEM: INCLUDES 42" FENCE AND RAILS FOR CUTTING UP TO 50" RIGHT AND 12" LEFT OF BLADE. THREE-POINT LOCKING SYSTEM ENSURES FENCE WILL BE PRECISELY PARALLEL TO THE BLADE AND WILL GIVE A SMOOTH, PRECISE CUT ACCURATE TO 1/32". 93 LBS. SHIPPING WEIGHT. OPTIONAL78-960 T-SQUARE® AND UNIFENCE® BLADE GUARD SYSTEM INCLUDES T-ARM ASSEMBLY, BLADE GUARD, SPLITTER, INSTALLATION BRACKET, MOUNTING HARDWARE AND INSTRUCTIONS. FITS 40" TO 62" FENCE SYSTEMS. 36 LBS. SHIPPING WEIGHT. BC30 COMMERCIAL SYSTEM COMES WITH 42" FENCE AND RAILS FOR 30" RIGHT AND 12" LEFT CUTTING CAPACITY; 77 LBS. SHIPPING WEIGHT. USES 78-955 T-SQUARE® BLADE GUARD SYSTEM (SIMILAR TO 78-960), WHICH FITS FENCE SYSTEMS 40" AND UNDER; 34 LBS. SHIPPING WEIGHT. OPTIONAL 78-966 DUST COLLECTION KIT PERMITS NON-THROUGH CUTTING OPERATIONS WITHOUT REMOVING GUARD. 5 LBS. SHIPPING WEIGHT. OPTIONAL 78-852 UNIVERSAL TABLE BOARD WITH LEGS MEASURES 2-1/2" X 27" X 44". 38 LBS. SHIPPING WEIGHT. OPTIONAL 50-302 OUTFEED TABLE INCLUDES 31" X 34" FOLDING TABLE AND OUTBOARD LEG (MOUNTING HARDWARE INCLUDED). 64 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.