|
|
|
Bits Drill And Boring - Plug & Tenon
|
CONCEAL POCKET HOLES USING PLUGS MADE FROM THE SAME WOOD AS YOUR PROJECT
|
| Pocket Hole Plug Cutter
|
USING THIS NEW STAINLESS STEEL POCKET HOLE PLUG CUTTER, YOU CAN FORGET ABOUT TRYING TO MATCH PRECUT PLUGS TO YOUR PROJECT. INSTEAD, USE THE LEFTOVER WOOD TO MAKE PLUGS THAT MATCH COLOR AND GRAIN:
WOOD IS HELD IN PLACE USING C-CLAMPS (NOT INCLUDED) WHILE YOU USE YOUR DRILL PRESS TO CUT THE PLUGS. WHEN DRILLING IS COMPLETED, RESAW PLUGS OUT OF THE WOOD USING YOUR BAND SAW. FOUR FLUTE, 3-1/16" OAL CUTTER, WITH 3/8" SHANK, MAKES PERFECT 3/8" DIAMETER PLUGS, TIME AFTER TIME. SIMPLY GLUE INTO POCKET HOLES, SAND AND FINISH. REQUIRES SIMPLE CONSTRUCTION OF 15° ANGLE FIXTURE, USING 3/4" STOCK. COMPLETE INSTRUCTIONS INCLUDED. PATENTS #5,810,524 AND #6,273,652. USA.
|
|
|
|
Books
|
THE RIGHT TECHNIQUE MAKES OR BREAKS THE BEST PROJECT
|
| Woodworking The Right Techniques
...plus other(s)
|
BEING ABLE TO USE THE RIGHT TECHNIQUE IS A BIG PART OF THE PLEASURE OF WOODWORKING. THAT'S WHY WOODWORKING: THE RIGHT TECHNIQUE©, A BOOK FULL OF JIGS, FIXTURES, TECHNIQUES, HINTS AND TIPS, SHOULD BE A PART OF YOUR LIBRARY. PLUS, WE HAVE ASSEMBLED THE HARDWARE NEEDED TO BUILD THE BEST OF THE JIGS IN THE BOOK:
900-335 - HARDWARE FOR MAKING GENERAL JIGS. 900-342 - SOLID STOP THAT WON'T PIVOT AND ONE THAT FLIPS OUT OF THE WAY. 900-349 - HARDWARE TO MAKE AN EASY TO USE TAPERING JIG. 900-356 - HARDWARE TO BUILD A 25" LONG FENCE FOR ULTRA PRECISE CROSSCUTTING FROM PERFECTLY SQUARE TO 60°. 900-363 - USE TO RESAW THICK STOCK INTO USABLE PIECES. 900-370 - HARDWARE TO ALLOW YOUR ROUTER TO CUT PERFECT CIRCLES AND ARCS. NOTE: HARDWARE ITEMS ARE LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Machinery Accessories - Band Saws
|
BOLT-ON BAND SAW FENCE FEATURES T-SLOT DESIGN AND LOTS OF OPTIONS
|
| 4-1/2" Resaw Guide
...plus other(s)
|
THE PATENTED 18" CAPACITY BOLT-ON BAND SAW FENCE IS DESIGNED TO ATTACH TO 14" DELTA® AND MOST IMPORTED BAND SAWS (SAE AND METRIC FASTENERS INCLUDED) TO PROVIDE GREATER ACCURACY AND ADDITIONAL OPTIONS:
MOUNTING BRACKET, RAIL AND FENCE ARE EXTRUDED ALUMINUM FOR DURABILITY. T-SLOTS ON TOP AND FACE OF RAIL AND FENCE ALLOW SIMPLE JIG AND FIXTURE ATTACHMENTS, USING 1/4"-20 CAP SCREWS. FENCE AND RAIL ARE EACH 19-1/4" LONG - RAIL SLIDES TO ONE SIDE TO ALLOW USE OF MITER SLOT.
BY ADDING THE 4-1/2" RESAW GUIDE TO THE BOLT-ON BAND SAW FENCE, STOCK CAN BE RESAWN TO UNIFORM THICKNESS BY ELIMINATING "DRIFT" THAT CAN MAKE BAND SAW CUTS DIFFICULT: RESAW GUIDE BOLTS SECURELY ONTO FENCE RAIL AND ITS CURVED FACE SUPPORTS WOOD, BUT ALLOWS FEED ANGLES TO BE ADJUSTED WHILE THE DISTANCE BETWEEN GUIDE AND BLADE REMAINS CONSTANT.
WHEN STOP POSITIONS NEED TO BE ADJUSTED BY THOUSANDTHS OF AN INCH, ADD THE PATENTED MICROADJUSTER TO YOUR BOLT-ON BAND SAW FENCE: CLAMPED ONTO THE RAIL BESIDE THE FENCE, MICROADJUSTER ALLOWS FOR VERY PRECISE (0.008") ADJUSTMENTS TO FENCE SETTINGS.
ALL HARDWARE AND INSTRUCTIONS INCLUDED WITH EACH ITEM.
|
|
|
|
Machinery Accessories - Band Saws
|
BAND SAW FENCE SYSTEM FEATURES T-SLOT DESIGN AND LOTS OF OPTIONS
|
| Kreg 4-1/2" Resaw Guide
...plus other(s)
|
THE PATENTED KREG™ KMS7200 PRECISION BAND SAW FENCE COMBINES UNPARALLELED RIGIDITY AND PRECISION:
TWO DIMENSIONAL ADJUSTMENT SIMPLIFIES SETTING THE FENCE PARALLEL TO THE BLADE. CUTTING ACCURACY AND REPEATABILITY ENHANCED BY PRECISION LENS CURSOR AND INCLUDED SCALE. RIGID, INTERLOCKING DOVETAIL DESIGN - FITS MOST DELTA®, JET®, GENERAL®, GRIZZLY® AND OTHER 14" BAND SAWS. OPTIONAL KMS7215 MICRO-ADJUSTER CLAMPS ONTO RAIL BESIDE FENCE ALLOWING VERY PRECISE (0.008") ADJUSTMENTS. OPTIONAL KMS7213 4-1/2" AND KMS7214 7" RESAW GUIDES ELIMINATE "DRIFT" SO STOCK CAN BE CUT TO UNIFORM THICKNESS. GUIDES BOLT ONTO FENCE RAIL BUT ALLOW FEED ANGLES TO BE ADJUSTED WHILE GUIDE-TO-BLADE DISTANCE REMAINS CONSTANT. ONE YEAR MANUFACTURERS WARRANTY. USA.
|
|
|
|
Machinery Accessories - Band Saws
|
CARTER ROLLER GUIDES FOR DELTA® 14" BAND SAWS
|
| 28-198 Carter Roller Guides
|
CARTER ROLLER GUIDES REPLACE YOUR EXISTING GUIDES TO PROVIDE EXCELLENT CONTROL FOR BOTH GENERAL BAND SAW WORK AND RESAWING:
SIDE ROLLERS HOLD THE BLADE IN PLACE AND THE REAR THRUST BEARING IS ENGAGED BY CUTTING PRESSURE TO PROVIDE UNEQUALLED BLADE SUPPORT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
ADD RIP FENCE ACCURACY TO YOUR DELTA® 14" BANDSAW
|
| Band Saw Rip Fence, 24" Rails
...plus other(s)
|
A GENUINE DELTA® MODEL 28-858 24" RIP FENCE MOUNTS DIRECTLY ONTO THE TABLE AND CAN BE THE MOST VALUABLE ACCESSORY YOU CAN ADD TO YOUR DELTA® 14" BANDSAW:
USE THE FENCE AND SAW TO PREPARE STOCK FOR TURNING, SPLIT DOWELS, RIP BEVELS, RIP EXTRA THICK STOCK, RESAW ACCURATELY AND MUCH MORE. INCLUDES STURDY ALUMINUM BODY, REMOVABLE PIVOT BAR FOR FREEHAND RESAWING, GUIDE RAILS AND MOUNTING HARDWARE. WEIGHS 15 LBS. 28-856 - HAVING SIMILAR FEATURES, THIS SMALLER DELTA® RIP FENCE (NOT SHOWN) IS 12" LONG BUT ALSO FITS 14" BANDSAWS. WEIGHS 12 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
DOUBLE THE HEIGHT CAPACITY OF YOUR DELTA® 14" BANDSAW WITH A FACTORY BUILT ATTACHMENT
|
| Height Attachment/14" Bs
|
WHEN YOU ADD THE MODEL 28-984 HEIGHT ATTACHMENT TO YOUR DELTA® 14" BANDSAW, THE CAPACITY UNDER THE GUIDE INCREASES FROM 6-1/4" TO 12-1/4"!
GREAT FOR RESAWING, CUTTING ANGULAR PIECES LIKE CHAIR BACKS AND FOR CUTTING THICK CORBELS OR LOGS. INCLUDES CAST BLOCK, DOWELS AND BOLT, EXTENSION AND FRONT AND BACK BLADE GUARDS. WEIGHS 12 LBS. MUST BE USED WITH 105" BLADES.
|
|
|
|
Machinery Accessories - Table Saws
|
FEED WORK PARALLEL TO THE SAWBLADE AND ELIMINATE BARE HAND FEEDING WITH GRR-RIPPER®
|
| Gr-200 Grr-ripper System
|
GRR-RIPPER® GRR-200 IS A HAND TOOL THAT GRIPS BOTH SIDES OF STOCK DURING CUTTING OPERATIONS, MAINTAINING BALANCED PARALLEL FEEDING, GREATLY INCREASING THE ACCURACY OF CUTS AND ELIMINATING BURNING AND KICKBACK:
STOCK IS COMPLETELY ENCLOSED AS IT PASSES ALONG THE RIP FENCE TOWARDS THE BLADE, PROTECTING HANDS AND FINGERS FROM CUTTING EDGES. MULTIPLE GROOVED, NON-SLIP PADS PROVIDE SUPERIOR GRIPPING - 8 ADJUSTABLE/DETACHABLE COMPONENTS CAN BE USED ON TABLESAWS, ROUTER TABLES, SHAPERS OR JOINTERS. USE FOR RESAWING, AS A PUSH BLOCK, CUSTOM JIG, HOLD DOWN, SPLITTER, NAVIGATOR OR ANY OF MANY OPTIONS - FULLY ADJUSTABLE. COMPLETE INSTRUCTIONS INCLUDED. ONE YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery - Band Saws
|
STEEL CITY™ STEEL FRAME INDUSTRIAL BANDSAWS OFFER 12" RESAW CAPACITY
|
| 18" Band Saw 2hp 1ph 2 Speed
...plus other(s)
|
STEEL CITY™ INDUSTRIAL BANDSAWS HAVE PLENTY OF POWER FOR EVEN THE TOUGHEST CUTTING OPERATIONS:
MODEL 50250 18" INDUSTRIAL BANDSAW: (SHOWN) 2HP, 230V, 1PH TEFC MOTOR W/MECHANICAL ON/OFF SWITCH - 1,850/3,100 SFPM. 18" BLADE TO FRAME - 10" MAXIMUM RIP RIGHT OF BLADE WITH RIP FENCE, 15-1/2" LEFT. 137" STANDARD BLADE LENGTH, 1-1/4" MAXIMUM WIDTH. 73"H X 39"W X 27"D. 450 LBS. NET WEIGHT; 510 LBS. SHIPPING WEIGHT.
MODEL 50300 20" INDUSTRIAL BANDSAW: 3HP, 230V, 1PH TEFC MOTOR W/MAGNETIC ON/OFF SWITCH - 2,100/3,450 SFPM. 20" BLADE TO FRAME - 11" MAXIMUM RIP RIGHT OF BLADE WITH RIP FENCE, 17-1/2" LEFT. 150" STANDARD BLADE LENGTH, 1-1/4" MAXIMUM WIDTH. 78"H X 40"W X 29"D. 536 LBS. NET WEIGHT; 596 LBS. SHIPPING WEIGHT.
20" X 20" CAST IRON TABLE TILTS 10° LEFT AND 48° RIGHT. 3/4" X 3/8" MITER SLOT. QUICK RELEASE BLADE TENSION LEVER FOR LESS BLADE FATIGUE AND LONGER BLADE LIFE. CAST IRON WHEELS, RESAW POST, 4" DUST PORT, WHEEL BRUSH, ADJUSTABLE BEARING GUIDES, WRENCHES AND INSTRUCTIONS INCLUDED. FIVE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
PRECISION BLADE GUIDES AND CAST IRON TABLES HELP WOODTEK® 18", 20" AND 24" BAND SAWS RUN SMOOTHER
|
| 18" Band Saw 2hp 1ph 230v
...plus other(s)
|
WITH TWO SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, WOODTEK® BAND SAWS TRACK STRAIGHT AND RUN COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOTS AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN AND A QUICK RELEASE BLADE LATCH. FOOT BRAKES ARE LARGE AND EASY TO REACH, SO YOU CAN QUICKLY STOP THE BLADE. SAWBLADE, TIRE, MITER GAUGE, RIP FENCE, GUIDE RAIL, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. 4" DIA. DUST COLLECTION PORT AT THE LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WOODTEK® 18" BAND SAW: MOTOR - 2 HP, 230V, 9.6A, 1PH, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 3,000 FPM. BLADE SIZE - 144", 1/4" TO 1" WIDE (17-1/2" DIA. WHEEL). HEIGHT CAPACITY - 10". DEPTH CAPACITY - 17-1/2". TABLE SIZE - 25-5/8" X 18-1/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 72-3/4"H X 31-1/2"W X 28-1/2"D. SHIPPING WEIGHT - 558 LBS.
WOODTEK® 20" BAND SAW: MOTOR - 2 HP, 230V, 12A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,000 FPM. BLADE SIZE - 155", 3/8" TO 1" WIDE (20" DIA. WHEEL). HEIGHT CAPACITY - 12-7/16". DEPTH CAPACITY - 19-3/16". TABLE SIZE - 23" X 20-1/2"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 73-3/4"H X 34"W X 26"D. SHIPPING WEIGHT - 593 LBS.
WOODTEK® 24" BAND SAW: MOTOR - 5 HP, 230V, 25A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,600 FPM. BLADE SIZE - 177", 3/8" TO 1" WIDE (23-1/4" DIA. WHEEL). HEIGHT CAPACITY - 15-1/2". DEPTH CAPACITY - 23-1/4". TABLE SIZE - 29" X 22-3/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 80"H X 36"W X 28"D. SHIPPING WEIGHT - 753 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
PRECISION BLADE GUIDES AND CAST IRON TABLE KEEP THE WOODTEK® TWO SPEED 14" BANDSAW RUNNING SMOOTHER
|
| 14" Band Saw 1hp W/fence & Miter
...plus other(s)
|
WITH TWO UPPER AND TWO LOWER SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, THE WOODTEK® TWO SPEED 14" BANDSAW TRACKS STRAIGHT AND RUNS COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLE HAS 3/8" X 3/4" MITER SLOT AND OFFERS VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. AIR NOZZLE, SAWBLADE, URETHANE TIRES, MITER GAUGE, EXTRUDED ALUMINUM FENCE SYSTEM, WRENCHES AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1HP, 120V, 1PH, 10A, 1,750 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SPEED - 1,720 OR 2,900 FPM. BLADE SIZE - 93-1/2", 1/4" TO 3/4" WIDE (13-7/8" DIA. WHEELS). HEIGHT CAPACITY - 6". DEPTH CAPACITY - 13-1/2". TABLE SIZE - 16-1/16" X 16-1/2"; TILTS 13°L AND 50°R. DUST PORT - 2-1/4" DIA. OVERALL DIMENSIONS - 67"H X 29-1/2"W X 19-1/8"D. SHIPPING WEIGHT - 194 LBS.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw 1-1/2hp
...plus other(s)
|
"ONE SOLID MACHINE" AND "PURRED LIKE A KITTEN" ARE WORDS WOOD® MAGAZINE EDITORS USED TO DESCRIBE THE POWERMATIC® PWBS-14CS 14" BAND SAW:
1-1/2 HP, 115/230V, 1PH MOTOR - 3,000 SFPM. MICRO ADJUSTABLE, DUAL BEARING BLADE GUIDE SYSTEM ABOVE AND BELOW THE TABLE - 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. TWO PIECE CAST IRON TABLE HAS 5" X 15" TILTING (45° RIGHT, 10° LEFT) SECTION AND FIXED 15" X 5" EXTENSION - CHIP BLOWER ENSURES CLEAN, VISIBLE CUT LINE. TENSIONING GAUGE SETTINGS INDICATED IN "BLADE WIDTH" INCREMENTS - CARTER QUICK RELEASE™ LEVER SPEEDS BLADE CHANGES. BALANCED, NINE SPOKE CAST IRON WHEELS RUN SMOOTHLY - POLY V-BELT MAXIMIZES POWER TRANSMISSION WHILE MINIMIZING NOISE AND VIBRATION. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. MITER GAUGE, 1/4" X 93-1/2" BLADE, 60 WATT HALOGEN WORK LIGHT, TOOL KIT AND INSTRUCTIONS INCLUDED. 68"H X 34"W X 20"L. 203 LBS. NET WEIGHT; 221 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® 20" AND 24" INDUSTRIAL BAND SAWS
|
| 20" 2013 Bandsaw 2hp 1ph 230v
...plus other(s)
|
TWO-SPEED POWERMATIC® MODEL 2013 20" AND MODEL 2415 24" INDUSTRIAL BAND SAWS CAN BE OPERATED AT 2,000 SFPM OR 4,000 SFPM TO TAKE FULL ADVANTAGE OF THEIR STANDARD AND RESAW CAPACITIES:
2, 3 OR 5 HP MOTOR - 1PH OR 3PH - 230V OR 230/460V WITH MAGNETIC ON/OFF SWITCH. SAWBLADE IS COMPLETELY GUARDED BUT EASILY ACCESSIBLE FOR CHANGING. CAST IRON WHEELS ARE EQUIPPED WITH VULCANIZED RUBBER TIRES - LOWER WHEEL BRUSH HELPS ELIMINATE SAWDUST BUILDUP. EASILY ACCESSIBLE HANDWHEELS AND CONTROLS. CONVENIENT FOOT BRAKE FOR RAPID STOPS. CAST IRON TABLE WITH 3/8" X 3/4" MITER SLOT TILTS 45° RIGHT, 10° LEFT. 4" DIA. DUST COLLECTION PORT (MINIMUM 600 CFM DUST COLLECTION REQUIRED). WORK LIGHT, RIP FENCE, MITER GAUGE, RAILS, WRENCH, HARDWARE AND INSTRUCTIONS INCLUDED.
MODEL 2013 20" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 12-3/8"/20". TABLE: 24" X 24". BLADE LENGTH/WIDTH: 158-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-1/4" TABLE HEIGHT X 34-1/4"W X 24"D. NET WEIGHT: 950 LBS. SHIPPING WEIGHT: 970 LBS.
MODEL 2415 24" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 14-3/8"/24". TABLE: 24" X 28". BLADE LENGTH/WIDTH: 180-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-3/8" TABLE HEIGHT X 39"W X 34-3/8"D. NET WEIGHT: 1,050 LBS. SHIPPING WEIGHT: 1,190 LBS.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
FROM GENERAL CUTTING TO RESAWING, JET® 16", 18" AND 20" WOODWORKING BAND SAWS CAN HANDLE IT ALL
|
| Jwbs-16b 16" Band Saw 1-1/2hp 1ph
...plus other(s)
|
JET® PROFESSIONAL WOODWORKING BAND SAWS FEATURE TRIANGULAR COLUMN AND STEEL STANDS FOR ROCK SOLID STABILITY:
BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. CAST IRON TABLES TILT 45°R AND 10°L. PUSH BUTTON, MECHANICAL ON/OFF SWITCH (JWBS-18X-3 AND JWBS-20 HAVE MAGNETIC SWITCHES).
JWBS-16B 16" BAND SAW 708749B: 1-1/2HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 10" DEPTH RESAW CAPACITY; 16-3/8" WIDE CUTTING CAPACITY. 17" X 17" TABLE. 123" SAWBLADE. 71"H X 22"W X 30-3/4"D. 310 LBS. NET WEIGHT; 345 LBS. SHIPPING WEIGHT.
JWBS-18QT 18" BAND SAW 710750B: 1-3/4HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 410 LBS. NET WEIGHT; 450 LBS. SHIPPING WEIGHT.
JWBS-18QT-3 18" BAND SAW 710751B: 3HP, 1PH, 230V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 460 LBS. SHIPPING WEIGHT.
JWBS-20QT-3 20" BAND SAW 708754B: 3HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
JWBS-20QT-5 20" BAND SAW 708755B: 5HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT AND MITER GAUGE (JWBS-16 EXCLUDED), 4TPI 3/4" WIDE SAWBLADE, 4" DUST PORT, FOOT BRAKE (JWBS-20 ONLY) AND INSTRUCTIONS INCLUDED. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
IT'S TOUGH TO MATCH THE JET® 18" WOODWORKING BANDSAW FOR FEATURES, QUALITY AND PRICE
|
| Jwbs-18qt 18" Band Saw 1-3/4hp 1ph
|
ONE OF THE MOST POPULAR JET® BANDSAWS, THE JWBS-18 18" WOODWORKING BANDSAW HAS EVERYTHING NEEDED TO RUN RIGHT OUT OF THE BOX:
1-1/2HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 10-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 133" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D; 320 LBS. NET WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 20" WOODWORKING BANDSAW IS POWERED BY A 2HP INDUSTRIAL STRENGTH MOTOR
|
| Jwbs-20qt-3 20" Band Saw 3hp 1ph
|
A TRUE CUTTING AND RESAWING WORKHORSE, THE JET® JWBS-20 20" WOODWORKING BANDSAW COMES WITH ALL OF THE FEATURES EXPECTED BY PROFESSIONAL OR SERIOUS AMATEUR WOODWORKERS - EVEN A FOOT BRAKE AS STANDARD EQUIPMENT:
2HP, 230V, 1PH TEFC MOTOR - 3,450 SFPM. PUSH BUTTON, MAGNETIC ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 20" FRAME TO BLADE CLEARANCE. 21" X 21" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 150" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 75"H X 22"W X 30-3/4"D; 500 LBS. NET WEIGHT. LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 18" WOODWORKING BANDSAW WITH ROLLER GUIDES
|
| Jwbs-18qt-3 18" Band Saw 3hp 1ph
...plus other(s)
|
THE JET® JWBS-18X-3 18" WOODWORKING BANDSAW HAS BIG-MACHINE CAPACITY WITH A FOOTPRINT SLIGHTLY LARGER THAN A 14" MACHINE:
3HP, 230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 137" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 435 LBS. SHIPPING WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
WOODTEK® 17" BANDSAWS HAS 2 SPEEDS AND BALL BEARING BLADE GUIDES
|
| 17" Band Saw 2hp 1ph 120/230v
|
THE WOODTEK® 17" BANDSAW TRACKS STRAIGHT AND RUNS COOL - A THIRD BEARING IN THE UPPER AND LOWER BLADE GUIDES SUPPORTS THE BACK OF THE SAWBLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
UPPER BLADE GUIDE IS ON A RACK-AND-PINION SYSTEM FOR GREATER ACCURACY. HEAVY CAST IRON TABLE, WITH 3/8" X 3/4" MITER "T" SLOT, OFFERS VIBRATION-FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. DUST PORT AT LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. SAWBLADE, REMOVABLE BLADE INSERT, RUBBER TIRES, LOWER WHEEL WIPER, MITER GAUGE, WRENCHES, HARDWARE AND INSTRUCTIONS INCLUDED. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 2HP, 120/240V, 8A/4A, 1PH, 1,720 RPM - "V" BELT DRIVE. ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SPEED - 1,800 FPM/2,800 FPM. BLADE SIZE - 130-1/2", 1/4" TO 1-3/8" WIDE (14-3/4" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-1/2". THROAT CAPACITY - 17-5/16". TABLE SIZE - 18" X 19"; TILTS 45°R AND 13°L. FENCE - 3-5/8"H X 18"L. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 84"H X 38"W X 30"D. NET WEIGHT - 350 LBS. SHIPPING WEIGHT - 404 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
DELTA X5™ 14" BAND SAW INCLUDES ENCLOSED STAND
|
| X5 14" Bandsaw 1-1/2hp Closed Base
...plus other(s)
|
CUT GRACEFUL CURVES, RESAW HARDWOODS OR MAKE COMPOUND CUTS WITH THE DELTA X5™ MODEL 28-475X 14" BAND SAW:
115/230VAC, 1-1/2HP, 1PH, 3,000 SFM MOTOR. STANDARD 93-1/2" X 1/4" BLADE - 13-3/4" BLADE TO FRAME CAPACITY, 6-1/4" UNDER GUIDE AND WHEEL. 16" X 16" TABLE WITH 45° RIGHT TILT, 9° LEFT - 3/8"D X 3/4"W MITER GAUGE GROOVE. INCLUDES PUSH BUTTON SWITCH, CHIP CHUTE, BLADE AND BELT GUARDS, ARBOR AND MOTOR PULLEYS, V-BELT, BLADE GUIDES, PLATINUM PRO® BAND SAW BLADE, QUICK RELEASE BLADE TENSION LEVER, INTEGRATED 4" DUST PORT AND INSTRUCTIONS. 65-1/2"H X 17-1/2"D X 25"W. 275 LBS. NET WEIGHT; 310 LBS. SHIPPING WEIGHT. USA. OPTIONAL 5" DIA. DUST CONNECTOR REPLACES EXISTING BAND SAW DUST SPOUT.
|
|
|
|
Machinery - Band Saws
|
HITACHI® 14-1/2" RESAW BANDSAW FEATURES 3" WIDE BLADE FOR PRECISION RESAWING
|
| Cb75f 14-1/2" RESAW BANDSAW
...plus other(s)
|
RESAWING VALUABLE WOOD IS FASTER AND MORE ACCURATE WITH THE LARGE BLADE CAPACITY OF THE HITACHI® CB 75F RESAW BANDSAW COMBINED WITH THE SAW'S 11-3/16" MAXIMUM CUTTING HEIGHT:
2.8HP, 120VAC, 15A, 1PH MOTOR - 900 RPM. HAND BRAKE NEXT TO START AND STOP BUTTONS FOR EXTRA SAFETY. 20-1/2" X 19-1/4" CAST IRON TABLE TILTS 45° AND HAS MITER GAUGE GROOVE. RACK AND PINION FENCE ADJUSTMENT PROVIDES SMOOTH OPERATION AND ACCURACY. ACCEPTS BLADES 1/4" TO 3" WIDE. ALL-STEEL BODY WITH BUILT-IN 4" DIA. DUST PORT. INCLUDES DURABLE 3" WIDE STELLITE® BLADE, GUIDE ASSEMBLY, TWO DOUBLE-END WRENCHES, BOX WRENCH, HEX BAR WRENCH, 6-1/2' LONG GROUNDED POWER CORD WITH PLUG AND INSTRUCTION MANUAL. 60"H X 37"W X 29"D, WEIGHS 308 LBS - DESIGNED FOR FLOOR MOUNTING. FIVE-YEAR MANUFACTURER'S WARRANTY. JAPAN.
HITACHI® CB 75F BANDSAW REPLACEMENT BLADES:
939-971 - 3" X 111.8" X 0.023" STELLITE® BLADE (12 TPF). 967-701 - 3" X 111.8" X 0.023" ALTERNATE-TOOTH STELLITE® BLADE (16 TPF). 921-705 - 1" X 110.75" X 0.025" SWAGED STEEL BLADE (24 TPF). 921-712 - 1/2" X 110.75" X 0.025" SWAGED STEEL BLADE (35 TPF). 921-719 - 1/4" X 110.75" X 0.025" SWAGED STEEL BLADE (48 TPF). 923-537 - 1" BLADE GUIDE (REQUIRED FOR 1" BLADE USE). 923-544 - 1/4" AND 1/2" BLADE GUIDE (REQUIRED FOR 1/4" AND 1/2" BLADE USE).
|
|
|
|
Advanced Search Tools
Browse our
symbol next to the category that matches your desired product and select a sub-category link.
