|
|
|
Machinery Accessories - Table Saws
|
MERLIN TABLE SAW SPLITTER INSTALLS OR REMOVES IN SECONDS
|
| Merlin Spltr-powermatic 66-ta (lt)
...plus other(s)
|
THE MTK SERIES MERLIN TABLE SAW SPLITTER ADDS SAFETY AND CONVENIENCE AND CAN BE INSTALLED OR REMOVED WITHOUT TOOLS IN A MATTER OF SECONDS:
INCLUDES 0.075" THICK SPLITTER BLADE SUITABLE FOR THIN AND REGULAR KERF SAWBLADES, REAR MOUNT ASSEMBLY AND UNIVERSAL RECEIVER, WHICH FITS INSIDE SAW THROAT USING EXISTING HOLES FROM FACTORY-SUPPLIED SPLITTER ASSEMBLY. ADJUSTABLE UP AND DOWN AND SIDE TO SIDE FOR PERFECT ALIGNMENT. ANTI-KICKBACK PROTECTION PROVIDED BY FOUR SHARPENED PIVOTING PAWLS THAT ACT ON THIN AND THICK MATERIAL ALIKE.
MTK120 - DELTA® 10" UNISAW® (RIGHT TILT) AND JET® XACTA TAS-10 (RIGHT TILT). MTK121 - DELTA® 10 UNISAW® (LEFT TILT) AND JET® XACTA (LEFT TILT). MTK130 - DELTA® CONTRACTOR'S SAW® (RIGHT TILT). MTK140 - GENERAL® 350 (RIGHT TILT). MTK150 - GENERAL® 10" CONTRACTOR 50-175 (RIGHT TILT) AND JET® CONTRACTOR JWTS. MTK200 - POWERMATIC® MODEL 66 (LEFT TILT). MTK220 - SEARS® 10" MODEL 113299120C (RIGHT TILT).
|
|
|
|
Machinery Accessories - Table Saws
|
ZERO CLEARANCE TABLE SAW INSERTS
|
| Zero Clearance Tblsaw Ins, Yellow
...plus other(s)
|
UPGRADE YOUR TABLESAW AND REDUCE TEAROUT FOR SHARP EDGES WITH THE DURABLE ABS PLASTIC PRECISION TABLESAW INSERTS. USE WITH THIN KERF BLADES, RIP BLADES AND DADOES ON LAMINATES, PLYWOODS AND OTHER FINE WOODS:
MOLDED RIBS UNDERNEATH ADD STRENGTH AND ENSURE FLATNESS. SET SCREWS LEVEL AND ELIMINATE SIDE TO SIDE PLAY FOR BETTER ACCURACY THAN OEM INSERTS. 95-380 - USE WITH RIGHT TILT DELTA® CONTRACTOR'S SAW® AND UNISAW® (YELLOW). NOTE: DOES NOT FIT LEFT TILT SAWS. 95-610 - USE WITH MOST CRAFTSMAN® AND SOME RIDGID® TABLESAWS (RED). 95-611 - FITS MOST POWERMATIC® #64 AND #66 SAWS (ORANGE). 95-612 - FITS JET® AND WOODTEK® CONTRACTOR TYPE SAWS (WHITE). IMPORTED. 131-987 (NOT SHOWN) - USE WITH CRAFTSMAN® TABLESAWS (GRAY). PREMIUM MELAMINE FACED, HIGH DENSITY PHENOLIC LAMINATE - LIMITED TO QUANTITIES ON HAND. USA.
|
|
|
|
Machinery - Table Saws
|
POWERMATIC® STRAIGHT LINE RIP SAW IS IDEAL FOR PROCESSING STOCK FROM KILN OR DOING GLUE LINE RIPS
|
| Slr12 Straight Line Rip Saw
...plus other(s)
|
|
FULL CAST IRON CONSTRUCTION FOR HEAVY DUTY PERFORMANCE 15HP MAIN MOTOR CAN HANDLE STOCK UP TO 12/4 AUTO-OILER WITH SHUT OFF FOR CONVEYOR CHAIN 18" RIP CAPACITY, AND 3-3/8" MAXIMUM DEPTH OF CUT HIGH ALLOY HEAT TREATED ARBOR PRECISION GROUND & DYNAMICALLY BALANCED SPECIAL GRADE CAST IRON FEED CHAIN BLOCKS V SHAPED CONVEYOR TRACK WAYS FOR RIGIDITY AND ACCURACY FULL BRUSH CLEANING SYSTEM TO KEEP CONVEYOR CLEAN 2HP FEED MOTOR WITH 30-125 FPM VARIABLE SPEED 7 STOCK HOLD DOWNS TO KEEP WORK PIECE FLAT & STRAIGHT THROUGH CUT CYCLE DUAL ANTI-KICKBACK DEVICES HEAVY STEEL FENCE WITH MICRO-ADJUSTMENT AND SOLID STEEL FENCE RAIL PEDESTAL MOUNTED CONTROLS, RIP, CONVEYOR SPEED AND DEPTH OF CUT EFFICIENT DUST COLLECTION ONE YEAR MANUFACTURERS WARRANTY
|
|
|
|
Machinery - Table Saws
|
POWERMATIC® PM2000 10" CABINET SAW OFFERS LEFT TILT BLADE, 50" FENCE AND RETRACTABLE WHEELS
|
| Pm2000 10" Table Saw, 3hp, 1ph
...plus other(s)
|
EQUIPPED WITH THE INDUSTRY'S FIRST ARBOR LOCK, THE POWERMATIC® PM2000 10" LEFT TILT CABINET SAW FEATURES AN INTEGRATED CASTER SYSTEM AND A TRUE, QUICK RELEASE RIVING KNIFE AND BLADE GUARD SYSTEM:
3HP, 230V, 1PH OR 5HP, 230V, 1PH OR 3PH (MAGNETIC SWITCH) - 4,300 RPM ARBOR SPEED; 5/8" ARBOR W/LOCK. POLY V-BELT DRIVE. 3-1/8" MAXIMUM CUT DEPTH AT 90°; 2-1/8" AT 45°; 50" MAXIMUM RIP RIGHT OF BLADE; 13-1/2" LEFT. 42" LONG X 30-1/2" WIDE CAST IRON TABLE (INCLUDES EXTENSIONS). UNIQUE TILT SCALE LETS YOU MARK A REFERENCE AND RETURN TO IT FOR REPEAT ANGLE CUTS. COMES WITH 50" ACCU-FENCE®, TWO CAST IRON EXTENSIONS, ENCLOSED STAND WITH CAST IRON BASE, MITER GAUGE, 4" DIA. DUST PORT, BLADE GUARD AND SPLITTER, ARBOR WRENCH AND INSTRUCTIONS. 34-1/2"H X 85"W X 37"D. 540 LBS. NET WEIGHT; 600 LBS. SHIPPING WEIGHT. 150-878, 150-881 AND 150-884 FEATURE A HARDWOOD EXTENSION TABLE, COMPLETE WITH BENCH DOG HOLES AND VISE, THAT REPLACES THE STANDARD MDF TABLE AND DOUBLES AS A MOBILE WORKBENCH. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Table Saws
|
POWERMATIC® HORIZONTAL PANEL SAWS ARE IDEAL FOR PROCESSING SHEET GOODS
|
| Hps67 Slide Table Saw, 3hp, 1ph, 230v
...plus other(s)
|
|
HEAVY WALLED EXTRUSIONS ON SLIDER & SUPPORT ARM ELIMINATE DISTORTION ALL CARRIAGE PARTS HARD ANODIZED TO PREVENT MARRING OF WORK PIECE CROSS CUT TABLE & COMPONENTS ARE FULL SEAM WELDED FOR RIGIDITY 2 POSITION CROSS CUT FENCE W/TELESCOPING EXTENSION & 2 FLIP DOWN WORK STOPS CAST IRON MAIN TABLE WITH SOLID STEEL FENCE RAIL DUAL POSITION MAIN TABLE FENCE W/MICRO-ADJUSTMENT SEPARATE MAIN MOTOR AND SCORING BLADE MOTOR ALL BLADE HEIGHT AND TILT CONTROLS FULLY ENCLOSED FOR DUST PROTECTION BLADE AND RIVING KNIFE ENCLOSED IN EURO STYLE DUST COLLECTION SHROUD OVERARM BLADE GUARD WITH DUST COLLECTION REAR OUTFEED AND RIGHT SIDE EXTENSION TABLES SELF BRAKING MOTORS INDEPENDENT SCORING BLADE MOTOR WITH ALIGNMENT ADJUSTMENT & SWITCH ONE YEAR MANUFACTURER'S WARRANTY
|
|
|
|
Advanced Search Tools
Browse
will