|
|
|
Machinery Accessories - Table Saws
|
MERLIN TABLE SAW SPLITTER INSTALLS OR REMOVES IN SECONDS
|
| Merlin Spltr-powermatic 66-ta (lt)
...plus other(s)
|
THE MTK SERIES MERLIN TABLE SAW SPLITTER ADDS SAFETY AND CONVENIENCE AND CAN BE INSTALLED OR REMOVED WITHOUT TOOLS IN A MATTER OF SECONDS:
INCLUDES 0.075" THICK SPLITTER BLADE SUITABLE FOR THIN AND REGULAR KERF SAWBLADES, REAR MOUNT ASSEMBLY AND UNIVERSAL RECEIVER, WHICH FITS INSIDE SAW THROAT USING EXISTING HOLES FROM FACTORY-SUPPLIED SPLITTER ASSEMBLY. ADJUSTABLE UP AND DOWN AND SIDE TO SIDE FOR PERFECT ALIGNMENT. ANTI-KICKBACK PROTECTION PROVIDED BY FOUR SHARPENED PIVOTING PAWLS THAT ACT ON THIN AND THICK MATERIAL ALIKE.
MTK120 - DELTA® 10" UNISAW® (RIGHT TILT) AND JET® XACTA TAS-10 (RIGHT TILT). MTK121 - DELTA® 10 UNISAW® (LEFT TILT) AND JET® XACTA (LEFT TILT). MTK130 - DELTA® CONTRACTOR'S SAW® (RIGHT TILT). MTK140 - GENERAL® 350 (RIGHT TILT). MTK150 - GENERAL® 10" CONTRACTOR 50-175 (RIGHT TILT) AND JET® CONTRACTOR JWTS. MTK200 - POWERMATIC® MODEL 66 (LEFT TILT). MTK220 - SEARS® 10" MODEL 113299120C (RIGHT TILT).
|
|
|
|
Machinery Accessories - Table Saws
|
ZERO CLEARANCE TABLE SAW INSERTS
|
| Zero Clearance Tblsaw Ins, Yellow
...plus other(s)
|
UPGRADE YOUR TABLESAW AND REDUCE TEAROUT FOR SHARP EDGES WITH THE DURABLE ABS PLASTIC PRECISION TABLESAW INSERTS. USE WITH THIN KERF BLADES, RIP BLADES AND DADOES ON LAMINATES, PLYWOODS AND OTHER FINE WOODS:
MOLDED RIBS UNDERNEATH ADD STRENGTH AND ENSURE FLATNESS. SET SCREWS LEVEL AND ELIMINATE SIDE TO SIDE PLAY FOR BETTER ACCURACY THAN OEM INSERTS. 95-380 - USE WITH RIGHT TILT DELTA® CONTRACTOR'S SAW® AND UNISAW® (YELLOW). NOTE: DOES NOT FIT LEFT TILT SAWS. 95-610 - USE WITH MOST CRAFTSMAN® AND SOME RIDGID® TABLESAWS (RED). 95-611 - FITS MOST POWERMATIC® #64 AND #66 SAWS (ORANGE). 95-612 - FITS JET® AND WOODTEK® CONTRACTOR TYPE SAWS (WHITE). IMPORTED. 131-987 (NOT SHOWN) - USE WITH CRAFTSMAN® TABLESAWS (GRAY). PREMIUM MELAMINE FACED, HIGH DENSITY PHENOLIC LAMINATE - LIMITED TO QUANTITIES ON HAND. USA.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw 1-1/2hp
...plus other(s)
|
"ONE SOLID MACHINE" AND "PURRED LIKE A KITTEN" ARE WORDS WOOD® MAGAZINE EDITORS USED TO DESCRIBE THE POWERMATIC® PWBS-14CS 14" BAND SAW:
1-1/2 HP, 115/230V, 1PH MOTOR - 3,000 SFPM. MICRO ADJUSTABLE, DUAL BEARING BLADE GUIDE SYSTEM ABOVE AND BELOW THE TABLE - 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. TWO PIECE CAST IRON TABLE HAS 5" X 15" TILTING (45° RIGHT, 10° LEFT) SECTION AND FIXED 15" X 5" EXTENSION - CHIP BLOWER ENSURES CLEAN, VISIBLE CUT LINE. TENSIONING GAUGE SETTINGS INDICATED IN "BLADE WIDTH" INCREMENTS CARTER QUICK RELEASE™ LEVER SPEEDS BLADE CHANGES. BALANCED, NINE SPOKE CAST IRON WHEELS RUN SMOOTHLY - POLY V-BELT MAXIMIZES POWER TRANSMISSION WHILE MINIMIZING NOISE AND VIBRATION. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. MITER GAUGE, 1/4" X 93-1/2" BLADE, 60 WATT HALOGEN WORK LIGHT, TOOL KIT AND INSTRUCTIONS INCLUDED. 68"H X 34"W X 20"L. 203 LBS. NET WEIGHT; 221 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® 20" AND 24" INDUSTRIAL BAND SAWS
|
| 2013 20" 2-spd Band Saw, 2hp 1ph 230v
...plus other(s)
|
TWO-SPEED POWERMATIC® MODEL 2013 20" AND MODEL 2415 24" INDUSTRIAL BAND SAWS CAN BE OPERATED AT 2,000 SFPM OR 4,000 SFPM TO TAKE FULL ADVANTAGE OF THEIR STANDARD AND RESAW CAPACITIES:
2, 3 OR 5 HP MOTOR - 1PH OR 3PH - 230V OR 230/460V WITH MAGNETIC ON/OFF SWITCH. SAWBLADE IS COMPLETELY GUARDED BUT EASILY ACCESSIBLE FOR CHANGING. CAST IRON WHEELS ARE EQUIPPED WITH VULCANIZED RUBBER TIRES - LOWER WHEEL BRUSH HELPS ELIMINATE SAWDUST BUILDUP. EASILY ACCESSIBLE HANDWHEELS AND CONTROLS. CONVENIENT FOOT BRAKE FOR RAPID STOPS. CAST IRON TABLE WITH 3/8" X 3/4" MITER SLOT TILTS 45° RIGHT, 10° LEFT. 4" DIA. DUST COLLECTION PORT (MINIMUM 600 CFM DUST COLLECTION REQUIRED). WORK LIGHT, RIP FENCE, MITER GAUGE, RAILS, WRENCH, HARDWARE AND INSTRUCTIONS INCLUDED.
MODEL 2013 20" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 12-3/8"/20". TABLE: 24" X 24". BLADE LENGTH/WIDTH: 158-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-1/4" TABLE HEIGHT X 34-1/4"W X 24"D. NET WEIGHT: 950 LBS. SHIPPING WEIGHT: 970 LBS.
MODEL 2415 24" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 14-3/8"/24". TABLE: 24" X 28". BLADE LENGTH/WIDTH: 180-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-3/8" TABLE HEIGHT X 39"W X 34-3/8"D. NET WEIGHT: 1,050 LBS. SHIPPING WEIGHT: 1,190 LBS.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC 1791800 PM1800 18" BAND SAW
|
| Pm1800 18" Band Saw, 5hp 1ph 230v
...plus other(s)
|
|
BALL BEARING BLADE GUIDES WITH MICRO-ADJUSTMENT FOR GREAT BLADE CONTROL SPECIAL GROOVED THRUST BEARING STABILIZES SMALLER BLADES MASSIVE CAST IRON CONSTRUCTION DAMPENS VIBRATION FOR SMOOTH OPERATION DYNAMICALLY BALANCED CAST IRON WHEELS HAVE FLYWHEEL MOMENTUM 2 BLADE SPEEDS TO HANDLE A VARIETY OF WORK, 1,800/4,200 SFPM 24" X 24" CAST IRON TABLE WITH 3/8" X " T-BOTTOM MITER SLOT HEAVY DUTY T-SQUARE STYLE FENCE WITH ADJUSTABLE EXTRUDED ALUMINUM CHEEK INCLUDES PRECISION MITER GAUGE 2" DIAMETER SOLID STEEL RE-SAW POST MULTI-STEP BLADE TENSION RELEASE LEVER IS QUICK AND EASY TO USE 4" DUST PORT CONVENIENTLY LOCATED FOOT BRAKE 5HP MOTOR IN SINGLE OR THREE PHASE, 3-PHASE PRE-WIRED 230V
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw + Riser Block Kit
...plus other(s)
|
|
PWBS-14CS 14" BAND SAW + RISER BLOCK KIT RISER BLOCK KIT FOR 14" BAND SAW
|
|
|
|
Machinery - Panel Saws
|
POWERMATIC® VERTICAL PANEL SAW HAS THE POWER FOR DEMANDING SHEET GOOD CUTS
|
| 511 Vertical Panel Saw
...plus other(s)
|
THE POWERMATIC® MODEL 511 VERTICAL PANEL SAW USES A TRUE COUNTERWEIGHT SYSTEM TO KEEP THE SAW CARRIAGE IN THE DESIRED POSITION WHEN LOADING OR UNLOADING PANELS:
POWERFUL 3HP, 120V, 1PH, 13A MOTOR - 8" DIA. BLADE SWIVELS IN SAW CARRIAGE TO PERFORM RIP CUTS (SAWBLADE NOT INCLUDED). 62" MAXIMUM CROSS CUT LENGTH; UNLIMITED RIP CUTS - 1-1/2" MAXIMUM THICKNESS. HEAVY DUTY, WELDED ONE PIECE STEEL FRAME - STAINLESS STEEL GUIDE TUBES WITH 8 ROLLER BEARING GUIDES. DUAL 4" DIA. DUST PORTS WITH NYLON BRUSH SURROUNDING SAWBLADE FOR SUPERIOR DUST COLLECTION. INCLUDES CASTERS, DUST HOSE AND COUNTERWEIGHT SYSTEM. 86"H X 120"W X 38"D. 435 LBS. NET WEIGHT; 500 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Table Saws
|
POWERMATIC® STRAIGHT LINE RIP SAW IS IDEAL FOR PROCESSING STOCK FROM KILN OR DOING GLUE LINE RIPS
|
| Slr12 Straight Line Rip Saw
...plus other(s)
|
|
FULL CAST IRON CONSTRUCTION FOR HEAVY DUTY PERFORMANCE 15HP MAIN MOTOR CAN HANDLE STOCK UP TO 12/4 AUTO-OILER WITH SHUT OFF FOR CONVEYOR CHAIN 18" RIP CAPACITY, AND 3-3/8" MAXIMUM DEPTH OF CUT HIGH ALLOY HEAT TREATED ARBOR PRECISION GROUND & DYNAMICALLY BALANCED SPECIAL GRADE CAST IRON FEED CHAIN BLOCKS V SHAPED CONVEYOR TRACK WAYS FOR RIGIDITY AND ACCURACY FULL BRUSH CLEANING SYSTEM TO KEEP CONVEYOR CLEAN 2HP FEED MOTOR WITH 30-125 FPM VARIABLE SPEED 7 STOCK HOLD DOWNS TO KEEP WORK PIECE FLAT & STRAIGHT THROUGH CUT CYCLE DUAL ANTI-KICKBACK DEVICES HEAVY STEEL FENCE WITH MICRO-ADJUSTMENT AND SOLID STEEL FENCE RAIL PEDESTAL MOUNTED CONTROLS, RIP, CONVEYOR SPEED AND DEPTH OF CUT EFFICIENT DUST COLLECTION ONE YEAR MANUFACTURERS WARRANTY
|
|
|
|
Machinery - Table Saws
|
POWERMATIC® PM2000 10" CABINET SAW OFFERS LEFT TILT BLADE, 50" FENCE AND RETRACTABLE WHEELS
|
| Pm2000 10" Table Saw, 3hp, 1ph
...plus other(s)
|
EQUIPPED WITH THE INDUSTRY'S FIRST ARBOR LOCK, THE POWERMATIC® PM2000 10" LEFT TILT CABINET SAW FEATURES AN INTEGRATED CASTER SYSTEM AND A TRUE, QUICK RELEASE RIVING KNIFE AND BLADE GUARD SYSTEM:
3HP, 230V, 1PH OR 5HP, 230V, 1PH OR 3PH (MAGNETIC SWITCH) - 4,300 RPM ARBOR SPEED; 5/8" ARBOR W/LOCK. POLY V-BELT DRIVE. 3-1/8" MAXIMUM CUT DEPTH AT 90°; 2-1/8" AT 45°; 50" MAXIMUM RIP RIGHT OF BLADE; 13-1/2" LEFT. 42" LONG X 30-1/2" WIDE CAST IRON TABLE (INCLUDES EXTENSIONS). UNIQUE TILT SCALE LETS YOU MARK A REFERENCE AND RETURN TO IT FOR REPEAT ANGLE CUTS. COMES WITH 50" ACCU-FENCE®, TWO CAST IRON EXTENSIONS, ENCLOSED STAND WITH CAST IRON BASE, MITER GAUGE, 4" DIA. DUST PORT, BLADE GUARD AND SPLITTER, ARBOR WRENCH AND INSTRUCTIONS. 34-1/2"H X 85"W X 37"D. 540 LBS. NET WEIGHT; 600 LBS. SHIPPING WEIGHT. 150-878, 150-881 AND 150-884 FEATURE A HARDWOOD EXTENSION TABLE, COMPLETE WITH BENCH DOG HOLES AND VISE, THAT REPLACES THE STANDARD MDF TABLE AND DOUBLES AS A MOBILE WORKBENCH. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Table Saws
|
POWERMATIC® HORIZONTAL PANEL SAWS ARE IDEAL FOR PROCESSING SHEET GOODS
|
| Hps67 Slide Table Saw, 3hp, 1ph, 230v
...plus other(s)
|
|
HEAVY WALLED EXTRUSIONS ON SLIDER & SUPPORT ARM ELIMINATE DISTORTION ALL CARRIAGE PARTS HARD ANODIZED TO PREVENT MARRING OF WORK PIECE CROSS CUT TABLE & COMPONENTS ARE FULL SEAM WELDED FOR RIGIDITY 2 POSITION CROSS CUT FENCE W/TELESCOPING EXTENSION & 2 FLIP DOWN WORK STOPS CAST IRON MAIN TABLE WITH SOLID STEEL FENCE RAIL DUAL POSITION MAIN TABLE FENCE W/MICRO-ADJUSTMENT SEPARATE MAIN MOTOR AND SCORING BLADE MOTOR ALL BLADE HEIGHT AND TILT CONTROLS FULLY ENCLOSED FOR DUST PROTECTION BLADE AND RIVING KNIFE ENCLOSED IN EURO STYLE DUST COLLECTION SHROUD OVERARM BLADE GUARD WITH DUST COLLECTION REAR OUTFEED AND RIGHT SIDE EXTENSION TABLES SELF BRAKING MOTORS INDEPENDENT SCORING BLADE MOTOR WITH ALIGNMENT ADJUSTMENT & SWITCH ONE YEAR MANUFACTURER'S WARRANTY
|
|
|
|
Advanced Search Tools
Browse
will