|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw 1-1/2hp
...plus other(s)
|
"ONE SOLID MACHINE" AND "PURRED LIKE A KITTEN" ARE WORDS WOOD® MAGAZINE EDITORS USED TO DESCRIBE THE POWERMATIC® PWBS-14CS 14" BAND SAW:
1-1/2 HP, 115/230V, 1PH MOTOR - 3,000 SFPM. MICRO ADJUSTABLE, DUAL BEARING BLADE GUIDE SYSTEM ABOVE AND BELOW THE TABLE - 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. TWO PIECE CAST IRON TABLE HAS 5" X 15" TILTING (45° RIGHT, 10° LEFT) SECTION AND FIXED 15" X 5" EXTENSION - CHIP BLOWER ENSURES CLEAN, VISIBLE CUT LINE. TENSIONING GAUGE SETTINGS INDICATED IN "BLADE WIDTH" INCREMENTS - CARTER QUICK RELEASE™ LEVER SPEEDS BLADE CHANGES. BALANCED, NINE SPOKE CAST IRON WHEELS RUN SMOOTHLY - POLY V-BELT MAXIMIZES POWER TRANSMISSION WHILE MINIMIZING NOISE AND VIBRATION. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. MITER GAUGE, 1/4" X 93-1/2" BLADE, 60 WATT HALOGEN WORK LIGHT, TOOL KIT AND INSTRUCTIONS INCLUDED. 68"H X 34"W X 20"L. 203 LBS. NET WEIGHT; 221 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® 20" AND 24" INDUSTRIAL BAND SAWS
|
| 24" 2415 Bandsaw 3hp 1ph 230v
...plus other(s)
|
TWO-SPEED POWERMATIC® MODEL 2013 20" AND MODEL 2415 24" INDUSTRIAL BAND SAWS CAN BE OPERATED AT 2,000 SFPM OR 4,000 SFPM TO TAKE FULL ADVANTAGE OF THEIR STANDARD AND RESAW CAPACITIES:
2, 3 OR 5 HP MOTOR - 1PH OR 3PH - 230V OR 230/460V WITH MAGNETIC ON/OFF SWITCH. SAWBLADE IS COMPLETELY GUARDED BUT EASILY ACCESSIBLE FOR CHANGING. CAST IRON WHEELS ARE EQUIPPED WITH VULCANIZED RUBBER TIRES - LOWER WHEEL BRUSH HELPS ELIMINATE SAWDUST BUILDUP. EASILY ACCESSIBLE HANDWHEELS AND CONTROLS. CONVENIENT FOOT BRAKE FOR RAPID STOPS. CAST IRON TABLE WITH 3/8" X 3/4" MITER SLOT TILTS 45° RIGHT, 10° LEFT. 4" DIA. DUST COLLECTION PORT (MINIMUM 600 CFM DUST COLLECTION REQUIRED). WORK LIGHT, RIP FENCE, MITER GAUGE, RAILS, WRENCH, HARDWARE AND INSTRUCTIONS INCLUDED.
MODEL 2013 20" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 12-3/8"/20". TABLE: 24" X 24". BLADE LENGTH/WIDTH: 158-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-1/4" TABLE HEIGHT X 34-1/4"W X 24"D. NET WEIGHT: 950 LBS. SHIPPING WEIGHT: 970 LBS.
MODEL 2415 24" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 14-3/8"/24". TABLE: 24" X 28". BLADE LENGTH/WIDTH: 180-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-3/8" TABLE HEIGHT X 39"W X 34-3/8"D. NET WEIGHT: 1,050 LBS. SHIPPING WEIGHT: 1,190 LBS.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
POWERMATIC® CBM21 LINE BORING MACHINE PROVIDES BOTTOM TO TOP DRILLING
|
| Cbm21 Cabinet Line Boring Machine
...plus other(s)
|
THE POWERMATIC® CBM21 21 SPINDLE LINE BORING MACHINE FEATURES A FULLY ADJUSTABLE BORING HEAD WITH DIGITAL READOUT THAT CAN DRILL VERTICALLY OR HORIZONTALLY AND LOCK AT ANY ANGLE IN BETWEEN:
2-1/2HP, 230V, 1PH MOTOR STARTS ONLY WHEN PNEUMATIC FEED CYCLE IS ACTIVATED BY THE FOOT PEDAL (90 PSI AIR SUPPLY REQUIRED). SIX POSITION TURRET STOP MAKES DRILLING DEPTH ADJUSTMENTS SIMPLE. CLAMP BAR WITH "GRIP TITE" SURFACE ENSURES PNEUMATIC WORK HOLD DOWNS STAY IN POSITION. 0-3-1/8" DRILLING DEPTH STROKE - 32MM BETWEEN CENTERS. 6" DEEP THROAT. 3,450 RPM SPINDLE SPEED. REQUIRES 11 RIGHT- AND 10 LEFT-HAND BORING BITS (NOT INCLUDED). 17-1/4" X 35" TABLE. 60" ADJUSTABLE BACKFENCE WITH FOUR FLIP STOPS LOCATES MATERIAL WITH PRECISION. COMES WITH TWENTY-ONE 10MM QUICK CHUCKS, TWO ADJUSTABLE FENCES FOR SMALL AND LARGE PANELS, FOOT PEDAL, TOOL KIT AND INSTRUCTIONS. 48"H X 31"W X 49"L. 682 LBS. NET WEIGHT; 841 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
POWERMATIC® LBM21 LINE BORING MACHINE
|
| Lbm21 Line Boring Machine
...plus other(s)
|
THE POWERMATIC® MODEL LBM21 21 SPINDLE LINE BORING MACHINE IS A SINGLE ROW LINE DRILL IDEAL FOR DRILLING SHELF SUPPORT HOLES, DRAWER SLIDE HOLES AND HINGE BASE PLATE HOLES:
2-1/2HP, 230V, 1PH MOTOR STARTS ONLY WHEN PNEUMATIC FEED CYCLE IS ACTIVATED BY THE FOOT PEDAL (90 PSI AIR SUPPLY REQUIRED). 0-2" DRILLING DEPTH STROKE - 32MM BETWEEN CENTERS. 6" DEEP THROAT. 3,450 RPM SPINDLE SPEED. REQUIRES 11 RIGHT- AND 10 LEFT-HAND BORING BITS (NOT INCLUDED). 19" X 47-1/4" TABLE. 60" FENCE WITH FOUR FLIP STOPS LOCATES MATERIAL WITH PRECISION. TWO MANUAL, HEAD-MOUNTED INDEX PINS PROVIDE PRECISE POSITIONING OF LONGER STOCK. COMES WITH TWENTY-ONE 10MM QUICK CHUCKS, FOOT PEDAL, ADJUSTABLE BACKFENCE AND INSTRUCTIONS. 63"H X 24"W X 49"L. 340 LBS. NET WEIGHT; 526 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
POWERMATIC® 18" DRILL PRESS LETS YOU CHANGE SPEED WITHOUT MANUALLY CHANGING THE BELT
|
| Pm2800 18" Drill Press 1hp 120/230
...plus other(s)
|
A SLIDING LEVER ON THE POWERMATIC® MODEL PM2800 18" FLOOR MODEL DRILL PRESS IS ALL THAT'S NEEDED TO SELECT THE SPEED YOU WANT USING JUST ONE HAND - NO MORE LOOSENING AND MOVING THE DRIVE BELT FROM PULLEY TO PULLEY. LASER CROSS HAIRS HELP ENSURE ACCURATE, CONSISTENT DRILLING:
1HP, 115/230V, 1PH, 400-3.000 RPM TEFC MOTOR - 5/8" KEYLESS CHUCK W/MT2 X JT33 SPINDLE TAPER. 3-1/8" DIA. COLUMN; 4-3/8" SPINDLE TRAVEL; 18" SWING. 14" X 16" CAST IRON TABLE, WITH TWO MITER SLOTS, TILTS 90° AND EXTENDS TO 16" X 26" TO HANDLE LONGER STOCK. ADJUSTABLE SPLIT FENCE HAS BUILT-IN DUST PORT. COMES WITH ASSEMBLY HARDWARE, WRENCHES AND INSTRUCTIONS. 68-1/2"H X 20"W X 31-1/2"D; 11-7/8" X 19-5/8" "FOOTPRINT". 287 LBS. NET WEIGHT; 302 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
LOADED WITH FEATURES, POWERMATIC® 8" PARALLELOGRAM JOINTER OFFERS PERFORMANCE AND VALUE
|
| Pj882 8" Jointer 2hp 1ph 230v
...plus other(s)
|
THE POWERMATIC® MODEL PJ882 8" PARALLELOGRAM JOINTER FEATURES A DESIGN THAT KEEPS ITS EXTRA-LONG 10" X 82" (31-5/16" HIGH) TABLE IN CLOSE ALIGNMENT WITH THE CUTTERHEAD FOR AN IMPROVED FINISH:
2HP OR 3HP, 230V, 1PH OR 3HP, 230V/460V - V-BELT DRIVE. 3 HSS KNIFE, 7,000 RPM CUTTERHEAD - 21,000 CPM. 4-3/4"H X 38-3/16"L FENCE TILTS IN AND OUT 45° (POSITIVE 45° AND 90° STOPS). 8"W X 1/2"D CUTTING AND 1/2" RABBETING CAPACITIES. 4" DIA. DUST PORT - MINIMUM 800 CFM REQUIRED. 732 LBS. NET WEIGHT; 764 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERMATIC® 8" JOINTER DELIVERS BIG CAPACITY AND PERFORMANCE
|
| 60c 8" Jointer 2hp 1ph 230v
...plus other(s)
|
THE POWERMATIC® MODEL 60B 8" JOINTER USES A FINE/QUICK ADJUSTMENT LEVER ON THE INFEED TABLE FOR PRECISION CUTS:
2HP, 230V, 1PH OR 3HP, 230V, 3PH MOTOR - V-BELT DRIVE. 3 HSS KNIFE, 7,000 RPM CUTTERHEAD - 21,000 CPM. 4-1/2"H X 38"L FENCE TILTS 45° LEFT OR RIGHT (POSITIVE 45° AND 90° STOPS) - 8-1/2" X 73" TABLE SURFACE. 8"W X 1/2"D CUTTING AND 1/2" RABBETING CAPACITIES. 4" DIA. DUST PORT - MINIMUM 800 CFM REQUIRED. COMES WITH CUTTER GUARD, DUST COLLECTION ADAPTER TWO PUSH BLOCKS AND INSTRUCTIONS. 482 LBS. NET WEIGHT; 510 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERMATIC® 6" JOINTER PROVIDES QUICK SETUPS WITH PRECISION CONTROLLED DEPTH OF CUT
|
| 54a 6" Jointer 1hp 1ph 115/230v
...plus other(s)
|
THE POWERMATIC® MODEL 54 6" JOINTER USES AN EXCLUSIVE CONTROLLED CHIP CUTTERHEAD FOR CLEANER AND SMOOTHER CUTS:
1HP, 115/230V, 1PH MOTOR - 18,000 CPM (PREWIRED 115V) - V-BELT DRIVE. 3 HSS KNIFE, 6,000 RPM CUTTERHEAD OR HELICAL MODEL WITH 40 FOUR-SIDED INSERTS. 7-1/4" X 66" TABLE; 32" HIGH - 4"H X 38"L FENCE TILTS 45° LEFT OR RIGHT (POSITIVE 45° AND 90° STOPS). 6"W X 1/2"D CUTTING AND 1/2" RABBETING CAPACITIES. STEEL STAND, CUTTER GUARD, 4" DUST PORT AND TWO PUSH BLOCKS INCLUDED. NET WEIGHT 313 LBS.; SHIPPING WEIGHT 332 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERMATIC® 15" PLANER/MOLDER USES HIGH SPEED FOR MAXIMUM STOCK REMOVAL, LOW FOR FINE FINISH
|
| Pm15 Planer/molder
...plus other(s)
|
THE VERSATILE POWERMATIC® MODEL PM15 15" PLANER/MOLDER WILL USE EITHER SINGLE MOLDING KNIVES OR 3 KNIFE SETS - IT'S YOUR CHOICE:
5HP, 230V, 1PH MOTOR POWERS THROUGH BIG JOBS - 10/20 FPM, TWO SPEED GEARBOX. 3 KNIFE HSS, 4,500 RPM CUTTERHEAD - 13,500 CPM. 1-1/2" DIA. URETHANE INFEED AND OUTFEED ROLLERS - 1/8" MAXIMUM PLANING CUT DEPTH; 3/4" MOLDING. 6-1/2" MAXIMUM WORKPIECE THICKNESS; 3/16" MINIMUM - 8" MINIMUM LENGTH. 15-5/8" X 27-1/2" CAST IRON TABLE SUPPORTED BY FOUR LEAD SCREWS - CHAIN AND SPROCKET CONTROL HEIGHT. 4" DIA. DUST PORT - MINIMUM 900 CFM REQUIRED. INCLUDES HINGED TOP, TOOL KIT, STEEL CABINET W/INTEGRATED CASTERS AND KNIFE SETTING GAUGE. 51"H X 34"W X 28"D. 423 LBS. NET WEIGHT; 550 LBS. SHIPPING WEIGHT. FIVE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERMATIC® 15S 15" PLANER
|
| 15s 15" Planer W/spiral Cutterhead
...plus other(s)
|
POWERMATIC® 15S DELUXE PLANER FEATURES CAST IRON EXTENSION TABLES, CLOSED STEEL STAND WITH BUILT-IN CASTERS AND TOP-MOUNTED STOCK RETURN ROLLERS TO SPEED REPETITIVE CUTS:
3HP, 230V, 1PH MOTOR W/MAGNETIC ON/OFF SWITCH. 16/20 FPM - V-BELT DRIVE. 4,500 RPM/13,500 CPM SPIRAL CUTTERHEAD WITH THREE FLEXIBLE KNIVES. 1/4" MAXIMUM CUT DEPTH; 14-7/8" MAXIMUM WIDTH. 6" MAXIMUM THICKNESS - 8" MINIMUM LENGTH. SERRATED STEEL INFEED AND SMOOTH STEEL OUTFEED ROLLERS. TWO-SPEED GEARBOX WITH AUTOMATIC CHAIN TENSIONER. 4" DIA. DUST PORT - MINIMUM 900 CFM REQUIRED. 43-1/2"H X 28"W X 48"D. 507 LBS. NET WEIGHT; 527 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERFUL POWERMATIC® 209 20" PLANER
|
| 209 20" Planer 5hp 1ph 230v
...plus other(s)
|
POWERMATIC® MODEL 209 20" PLANER FEATURES A HIGHLY ACCURATE DIGITAL READOUT, CAST IRON EXTENSION TABLES, CLOSED STEEL STAND WITH BUILT-IN CASTERS AND TOP-MOUNTED STOCK RETURN ROLLERS TO SPEED REPETITIVE CUTS:
5HP, 230V, 1PH MOTOR W/MAGNETIC ON/OFF SWITCH. 16/20 FPM AND 24/31 FPM FEED RATES - V-BELT DRIVE. 5,000 RPM/20,000 CPM CUTTERHEAD WITH FOUR STRAIGHT KNIVES. 3/32" MAXIMUM CUT DEPTH; 20" MAXIMUM WIDTH. 8" MAXIMUM THICKNESS 6-3/4" MINIMUM LENGTH. SERRATED STEEL INFEED AND SMOOTH STEEL OUTFEED ROLLERS. GEARBOX FEATURES AUTOMATIC CHAIN TENSIONER. 5" DIA. DUST PORT - MINIMUM 900 CFM REQUIRED. 41-3/8"H X 36-5/8"W X 26"D. 770 LBS. NET WEIGHT; 880 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
LOADED WITH FEATURES, POWERMATIC® 16" JOINTER OFFERS BIG CAPACITY AND PERFORMANCE
|
| 16" Jointer, Helical Cutterhead, 7-1/2hp
...plus other(s)
|
UNIQUE "FOUR POINT" PARALLELOGRAM TABLE DESIGN ALSO MAKES THE POWERMATIC® MODEL PJ1696 16" JOINTER EASIER TO KEEP IN PERFECT ALIGNMENT:
7-1/2HP, 230/460V, 3PH MOTOR - 20,800 CPM (6" DUST PORT - MINIMUM 800 CFM DUST COLLECTION SYSTEM RECOMMENDED). 4" DIA. HELICAL CUTTERHEAD TURNS AT 5,200 RPM AND HAS 56 FOUR-SIDED STANDARD AND 2 RABBET CARBIDE INSERTS. 19" X 96" TABLE HAS "LIPS" ON BOTH SIDES OF CUTTERHEAD TO AID IN NOISE REDUCTION. 3/4" X 16" CUTTING CAPACITY. BUILT-IN 5" X 24-1/2" RABBETING LEDGE. 5-1/4" X 47-1/4" CAST IRON FENCE ASSEMBLY ADJUSTS WITH RACK-AND-PINION SYSTEM AND RAM LOCK. FENCE TILTS 45°, LEFT AND RIGHT, AND HAS 45°, 90° AND 135° POSITIVE STOPS. ENCLOSED SHEET METAL STAND, WRENCHES, DUST CHUTE, TWO PUSH BLOCKS AND INSTRUCTIONS INCLUDED. 43"H X 46"W X 96"L. NET WEIGHT 1,280 LBS.; 1,400 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERMATIC® 12" JOINTER HAS 7 FOOT "FOUR POINT" PARALLELOGRAM BED
|
| 12" Jointer Std Head 3hp 1ph 230v
...plus other(s)
|
THE UNIQUE "FOUR POINT" PARALLELOGRAM TABLE DESIGN MAKES THE POWERMATIC® MODEL 1285 12" JOINTER EASIER TO KEEP IN PERFECT ALIGNMENT:
3HP, 230V, 1PH OR 3PH MOTOR - 5,000 RPM CUTTERHEAD SPEED (MINIMUM 800 CFM DUST COLLECTION SYSTEM RECOMMENDED). 3/4" X 11-3/4" CUTTING CAPACITY. ADJUSTABLE INFEED AND OUTFEED TABLES WITH LOCKING KNOB. BUILT-IN RABBETING LEDGE WITH 3/4" CAPACITY. 12" X 84" TABLE HAS "LIPS" ON BOTH SIDES OF CUTTERHEAD TO AID IN NOISE REDUCTION. 5-1/2" X 47" FENCE ASSEMBLY TILTS 45°, LEFT AND RIGHT, AND HAS 45° AND 90° POSITIVE STOPS. STANDARD CUTTERHEAD MODELS COME WITH THREE 1/8" X 13/16" X 12" HEAT-TREATED, M-2 HSS KNIVES. HELICAL CUTTERHEAD MODELS HAVE 44 FOUR-SIDED STANDARD AND TWO RABBET CARBIDE INSERTS. COMES WITH ENCLOSED SHEET METAL STAND, KNIFE-SETTING GAUGE, WRENCHES, DUST HOOD, TWO PUSH BLOCKS AND INSTRUCTIONS. NET WEIGHT 762 LBS.; 880 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERMATIC® 22" PLANER CAST IRON TABLE TRAVELS ON TWO LARGE LEAD SCREWS FOR GREAT STOCK SUPPORT
|
| 201 22"planer 7.5hp 1ph 230v
...plus other(s)
|
AVAILABLE WITH A FOUR-KNIFE OR HELICAL CUTTERHEAD, THE POWERMATIC® 22" PLANER COMES WITH A POWERFUL MOTOR THAT CAN BE ORDERED TO MATCH YOUR ELECTRIC SERVICE. IT FEATURES A SEGMENTED INFEED ROLLER WITH SECTIONAL CHIP BREAKER, TWO ADJUSTABLE BED ROLLERS AND ROLLER BEARING FEED ROLLERS:
7-1/2HP, 1PH OR 3PH, 230V OR 460V MOTOR - 19,200 CPM. 3-1/4" DIA., FOUR-KNIFE CUTTERHEAD OR QUIETER, SMOOTHER RUNNING HELICAL DESIGN WITH 150 FOUR-SIDED KNIFE INSERTS. 20/30 FPM FEED RATE. 3/16" MAXIMUM CUT DEPTH, 9-1/4" THICKNESS AND 22" WIDTH. 1/8" MINIMUM STOCK THICKNESS; 10" LENGTH. 24" X 32-1/4" CAST IRON TABLE ADJUSTS 1/16" WITH EACH HANDWHEEL ROTATION. 5" DIA. DUST PORT. 900 CFM MINIMUM DUST COLLECTION. FOOT PADS, KNIFE SETTING GAUGE AND TOOL KIT INCLUDED. 59"H X 49"W X 42"L. 1,350 LBS. NET WEIGHT; 1,430 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURERS WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERMATIC® PRODUCTION PLANERS WITH BYRD® SHELIX® HELICAL CUTTERHEADS
|
| 15hh 15" Planer Helical Cutterhead
...plus other(s)
|
POWERMATIC® HELICAL CUTTERHEAD PLANERS FEATURE HIGHLY ACCURATE DIGITAL READOUTS, CAST IRON EXTENSION TABLES, CLOSED STEEL STANDS WITH BUILT-IN CASTERS AND TOP-MOUNTED STOCK RETURN ROLLERS TO SPEED REPETITIVE CUTS:
15HH 15" PLANER:
4,500 RPM BYRD® SHELIX® HELICAL CUTTERHEAD WITH INSERTS. 3HP, 230V, 1PH MOTOR - 16/20 FPM. 1/4" MAXIMUM CUT DEPTH; 14-7/8" MAXIMUM WIDTH. 6" MAXIMUM THICKNESS - 8" MINIMUM LENGTH. 43-1/2"H X 28"W X 48"D. 4" DIA. DUST PORT - MINIMUM 900 CFM REQUIRED. 517 LBS. NET WEIGHT; 537 LBS. SHIPPING WEIGHT.
209HH 20" PLANER:
5HP, 230V, 1PH OR 3PH MOTOR. 5,000 RPM HELICAL CUTTERHEAD HAS 132 INDIVIDUAL CUTTERS - 16/20/24/31 FPM. 20" MAXIMUM CUT WIDTH; 8" MAXIMUM THICKNESS. 3/32" MAXIMUM CUT DEPTH; 6-3/4" MINIMUM LENGTH. 5" DIA. DUST PORT - MINIMUM 900 CFM REQUIRED. 41-3/8"H X 26"W X 36-5/8"D. 780 LBS. NET WEIGHT; 890 LBS. SHIPPING WEIGHT.
MAGNETIC ON/OFF SWITCH - V-BELT DRIVE. SERRATED STEEL INFEED AND SMOOTH STEEL OUTFEED ROLLERS. TWO-SPEED GEARBOX WITH AUTOMATIC CHAIN TENSIONER. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
POWERMATIC® PRODUCTION PLANER OFFERS 5HP MOTOR, FOUR FEED SPEEDS AND SHELIX® HELICAL CUTTERHEAD
|
| 209hh 20" Helical Head Planer 1ph
...plus other(s)
|
THE POWERMATIC® MODEL 209HH 20" PLANER WITH BYRD® SHELIX® CUTTERHEAD NOT ONLY CUTS SMOOTHER BUT THE STAGGERED DESIGN BREAKS UP CHIPS FOR IMPROVED DUST COLLECTION:
5HP, 230V, 1PH OR 3PH MOTOR - 5,000 RPM CUTTERHEAD HAS 132 INDIVIDUAL CUTTERS; 16/20/24/31 FPM. MAGNETIC ON/OFF SWITCH - V-BELT DRIVE. 20" MAXIMUM CUT WIDTH; 8" MAXIMUM THICKNESS. 3/32" MAXIMUM CUT DEPTH; 6-3/4" MINIMUM LENGTH. SERRATED STEEL INFEED AND SMOOTH STEEL OUTFEED ROLLERS. TWO-SPEED GEARBOX WITH AUTOMATIC CHAIN TENSIONER. 5" DIA. DUST PORT - MINIMUM 900 CFM REQUIRED. HIGHLY ACCURATE DIGITAL READOUT, CAST IRON EXTENSION TABLES, CLOSED STEEL STAND WITH BUILT-IN CASTERS AND TOP-MOUNTED STOCK RETURN ROLLERS TO SPEED REPETITIVE CUTS. 41-3/8"H X 26"W X 36-5/8"D. 780 LBS. NET WEIGHT; 890 LBS. SHIPPING WEIGHT. FIVE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Lathes
|
POWERMATIC® 3520B LATHE
|
| Powermatic 3520b Lathe
...plus other(s)
|
THE FULLY ACCESSORIZED POWERMATIC® MODEL 3520B WOOD LATHE HAS IMPROVED FEATURES IN THIS THIRD GENERATION MODEL INCLUDING AN ENHANCED DIGITAL TACHOMETER, SPINDLE INDEXING, IMPROVED TOOL REST LOCKING AND A LASER ETCHED TAILSTOCK QUILL. THE DRIVE SYSTEM USES A TWO-STEP, POLY V-BELT DRIVE WITH TWO REVERSIBLE VARIABLE SPEED RANGES: 50-1,200 AND 125-3,200 RPM. THE STANDARD MOVABLE HEADSTOCK SLIDES TO THE END OF THE BED AND CAN BE USED FOR 38" SWING BOWL TURNING WHEN USED WITH THE OPTIONAL 18" BED EXTENSION BOLTED TO THE LOWER MOUNT HOLES. THIS BED EXTENSION INCLUDES A TOOLREST POST EXTENSION USED ON THE EXISTING TOOL REST BASE. OPTIONAL EQUIPMENT INCLUDES AN ACCESSORY FREE-STANDING OUTBOARD TURNING STAND PROVIDING ADDITIONAL VERSATILITY TO OUTBOARD TURNING. FOR LONGER WORK, A 50" BED EXTENSION BRINGS THE BETWEEN-CENTERS DISTANCE TO 84". A 26" DOUBLE-POSTED TOOL REST IS ALSO AVAILABLE FOR LONG SPINDLE TURNING AND A 24 POSITION INDEXING ASSEMBLY BOLTS DIRECTLY TO THE HEADSTOCK FOR INDEXING WORK:
OPTIONAL 18" BED EXTENSION INCLUDES TOOLREST BASE POST EXTENSION. OPTIONAL 50" BED EXTENSION INCLUDES LEG SUPPORT. OPTIONAL 26" DOUBLE-POSTED TOOL REST REQUIRES AN ADDITIONAL TOOLREST BASE ASSEMBLY. LATHE INCLUDES 14" TOOL REST, 3" FACE PLATE, SPUR DRIVE, LIVE CENTER, SAFETY SHIELD, TOOL TRAY, METAL SHELF, DEAD CENTERS (2), WRENCH, KNOCKOUT ROD, SPINDLE LOCK AND INSTRUCTION MANUAL. NET WEIGHT - 682 LBS; SHIPPING WEIGHT - 720 LBS. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 2HP, 230VAC, 6.2A, 3PH (REQUIRES 230V, 20A, 1PH CIRCUIT INPUT). SPEED RANGES (2): 0-1,200 AND 0-3,200 RPM. SWING OVER BED - 20" (16" OVER BASE). DISTANCE BETWEEN CENTERS - 34-1/2". HEADSTOCK SHAFT: 1-1/4"-8TPI, #2MT, 5/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 4-1/2" TRAVEL, #2MT, 3/8" BORE, SELF-EJECTING. SPINDLE HEIGHT 44" W/2" DIAMETER ADJUSTABLE FEET. OUTBOARD SWING 38" OVERALL DIMENSIONS - 58"H X 50"W X 24"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY TALON CHUCK - 959-627. ONEWAY STRONGHOLD CHUCK - 959-979. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery - Lathes
|
POWERMATIC® 4224 LATHE
|
| Powermatic 4224 Lathe
...plus other(s)
|
THE POWERMATIC® 4224 WOOD LATHE IS A LONG AND STRONG CAST IRON WOOD LATHE DESIGNED FOR LARGE BOWL AND SPINDLE TURNING. IT USES A 3-STEP, POLY V-BELT DRIVE WITH THREE VARIABLE SPEED RANGES: 0-910 RPM FOR HEAVY BOWL WORK, 0-2,000 RPM FOR STANDARD TURNING AND 0-3,500 RPM FOR HIGH SPEED SPINDLE AND FINISHING WORK. THE SPINDLE DIRECTION IS REVERSIBLE FOR OUTBOARD TURNING AND A REMOTE ON/OFF SWITCH MAGNETICALLY ATTACHES TO ANY PART OF THE LATHE. AN OPTIONAL 65" INBOARD BED IS AVAILABLE WHICH BRINGS THE INBOARD BETWEEN CENTERS DISTANCE TO 109". FOR LONG SPINDLE TURNING, AN OPTIONAL 26" DOUBLE-POSTED TOOL REST IS USED WITH A SECOND INBOARD TOOLREST BASE. A 48" SWING OUTBOARD TURNING ASSEMBLY IS ALSO AVAILABLE FOR FREE HANGING OPEN BOWL AND PLATTER TURNING AND A HEAVY DUTY TOOL REST TURNING STAND ADDS MORE VERSATILITY TO OUTBOARD TURNING:
OPTIONAL 65" INBOARD BED INCLUDES SUPPORT LEG. OPTIONAL 20" OUTBOARD TURNING ASSEMBLY COMPLETE INCLUDES 20" OUTBOARD BED, SUPPORT LEG AND OUTBOARD TOOLREST BASE. LATHE INCLUDES 14" TOOL REST, 3" FACEPLATE, SPUR DRIVE, LIVE CENTER, REMOTE ON/OFF SWITCH, SAFETY SHIELD, SPINDLE LOCK, KNOCKOUT ROD, WRENCH AND OPERATION MANUAL. NET WEIGHT - 848 LBS; SHIPPING WEIGHT - 904 LBS FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 3HP, 230VAC, 6.2A, 3PH (REQUIRES 230V, 20A, 1PH CIRCUIT INPUT). SPEED RANGES (3): 0-910, 0-2,000 AND 0-3,500 RPM. SWING OVER BED - 24" (18-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 42". HEADSTOCK SHAFT: 1-1/4"-8TPI, #2MT, 5/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 4-1/2" TRAVEL, #2MT, 3/8" BORE, SELF-EJECTING. SPINDLE HEIGHT - 44" W/2" ADJUSTABLE FEET. OVERALL DIMENSIONS - 54-3/4"H X 65"W X 24"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY TALON CHUCK - 959-627. ONEWAY STRONGHOLD CHUCK - 959-979. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery - Mitersaws
|
POWERMATIC® 18" CUT OFF SAW PROCESSES WOOD WITH AMAZING SPEED
|
| Cos18 18" Left-hand Cut-off Saw
...plus other(s)
|
CAPABLE OF UP TO 70 CYCLES A MINUTE, THE POWERMATIC® COS18 CUT OFF SAW MAKES SHORT WORK OF ANY JOB REQUIRING FAST, SQUARE CUTS AND PRODUCTION FACILITY CAPACITY - AVAILABLE IN LEFT- AND RIGHT-HAND MODELS:
POWERFUL 10HP, 3PH, 230/460V MOTOR - 3,320 RPM ARBOR SPEED; 1" ARBOR. FOOT PEDAL BLADE ACTIVATION. 4-3/8" X 10-1/2" CAPACITY AT MAXIMUM HEIGHT; 1" X 13-3/8" MAXIMUM WIDTH. 26-1/2" X 28" CAST IRON TABLE AND HEAVY STEEL PLATE BODY FOR DURABILITY. PNEUMATIC SAFETY GUARD ON INFEED AND FULL BASKET GUARD ON OUTFEED. LARGE SIDE DOOR FOR QUICK BLADE ACCESS. 4" DIA. DUST PORT (MINIMUM 600 CFM DUST COLLECTION REQUIRED). 18" X 120T CARBIDE TIPPED BLADE AND TOOL KIT INCLUDED. 46"H X 35"W X 33"D. 730 LBS. NET WEIGHT; 832 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURERS WARRANTY. OPTIONAL INFEED AND OUTFEED TABLES MOUNT QUICKLY; 8' TABLE FEATURES THREE STOPS AND SCALE. IMPORTED.
|
|
|
|
Machinery - Mortisers
|
POWERMATIC® TILTING TABLE HOLLOW CHISEL MORTISER EXCELLENT CHOICE FOR PRODUCTION FACILITIES
|
| 719t Tilt Table Mortiser
...plus other(s)
|
THE HEAD ON THE POWERMATIC® MODEL 719T TILTING TABLE HOLLOW CHISEL MORTISER IS MOUNTED USING ADJUSTABLE GIBS TO ENSURE YEARS OF TROUBLE FREE SERVICE:
1HP, 115V/230V (PREWIRED 115V), 1PH, 1,725 RPM MOTOR - 1/2" CHUCK EASILY ACCESSIBLE THROUGH HINGED DOORS. 10-3/4" MAXIMUM CHISEL STROKE; 6" MAXIMUM HEAD STROKE - RACK AND PINION GEAR SYSTEM USES SPRING LOADED, SIX POSITION ADJUSTABLE HANDLE. 1/4" TO 1" CHISEL CAPACITY - 5/8", 3/4", 1-1/8" CHISEL SHANK DIAMETERS. 7" X 20-1/4" WOODEN TABLE TILTS 0°-35°; ADJUSTS LEFT, RIGHT, FRONT AND BACK - 4-1/2" X 20-1/4" METAL FENCE. STEEL CABINET BASE, WORK STOPS, CHUCK KEY, DRILL BIT ADAPTER, QUICK RELEASE VISE, CHUCK EXTENSION ADAPTER AND HARDWARE INCLUDED. 74"H X 21-5/8"W X 21-1/4"D. 276 LBS. NET WEIGHT; 292 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse our
symbol next to the category that matches your desired product and select a sub-category link.
