|
|
|
Bits Router - Edge & Molding
|
PORTER CABLE® 3/16" OGEE WITH FILLET ROUTER BIT
|
| 3/16" Ogee W/fillet 43175pc
|
|
FORMS A CLASSIC DESIGN ON EDGES. ADJUST HEIGHT TO CUT THE PROFILE WITH OR WITHOUT A FILLET. MONSTER-CARBIDE™ TIPS RESULT IN BETTER HEAT AND FORCE DISTRIBUTION. TO GENERATE LESS FRICTION AND RUN COOLER. THIS PROVIDES SMOOTHER CUTS AND ALLOWS A FASTER FEED RATE. CARBIDE THICKNESS ALSO ALLOWS BIT TO BE RESHARPENED MORE TIMES THAN STANDARD CARBIDE POZI-STOP™ SHANK AUTOMATICALLY LOCATES BIT AT CORRECT HEIGHT IN COLLET - NO TEST CUTS NEEDED. SWITCHING BETWEEN BITS DURING A PROJECT IS FAST AND EASY SINCE BITS WILL ALWAYS BE AT EXACTLY THE SAME HEIGHT. THIS CREATES A STRONGER, LONGER-LASTING BIT WITH LESS VIBRATION PRODUCING SMOOTHER CUTS. MADE IN USA.
|
|
|
|
Bits Router - Edge & Molding
|
PORTER CABLE® 1/4" ROUNDOVER ROUTER BIT
|
| 1/4" Roundover 43425pc
|
|
FORMS SMOOTH, UNIFORMLY ROUND EDGES. HEIGHT CAN BE ADJUSTED TO FORM A ROUNDED CORNER WITH A DECORATIVE FILLET. MONSTER-CARBIDE™ TIPS RESULT IN BETTER HEAT AND FORCE DISTRIBUTION TO GENERATE LESS FRICTION AND RUN COOLER. THIS PROVIDES SMOOTHER CUTS AND ALLOWS A FASTER FEED RATE. CARBIDE THICKNESS ALSO ALLOWS BIT TO BE RESHARPENED MORE TIMES THAN STANDARD CARBIDE POZI-STOP™ SHANK AUTOMATICALLY LOCATES BIT AT CORRECT HEIGHT IN COLLET - NO TEST CUTS NEEDED. SWITCHING BETWEEN BITS DURING A PROJECT IS FAST AND EASY SINCE BITS WILL ALWAYS BE AT EXACTLY THE SAME HEIGHT. THIS CREATES A STRONGER, LONGER-LASTING BIT WITH LESS VIBRATION PRODUCING SMOOTHER CUTS. MADE IN USA.
|
|
|
|
Bits Router - Joinery
|
PORTER CABLE® 2" DRAWER LOCK ROUTER BIT
|
| 2" Drawer Lock Bit 43510pc
|
|
USED TO JOIN FRONTS AND SIDES OF DRAWERS. FOR USE IN 1/2" THICK STOCK. MONSTER-CARBIDE™ TIPS RESULT IN BETTER HEAT AND FORCE DISTRIBUTION TO GENERATE LESS FRICTION AND RUN COOLER. THIS PROVIDES SMOOTHER CUTS AND ALLOWS A FASTER FEED RATE. CARBIDE THICKNESS ALSO ALLOWS BIT TO BE RESHARPENED MORE TIMES THAN STANDARD CARBIDE. POZI-STOP™ SHANK AUTOMATICALLY LOCATES BIT AT CORRECT HEIGHT IN COLLET - NO TEST CUTS NEEDED. SWITCHING BETWEEN BITS DURING A PROJECT IS FAST AND EASY SINCE BITS WILL ALWAYS BE AT EXACTLY THE SAME HEIGHT. THIS CREATES A STRONGER, LONGER-LASTING BIT WITH LESS VIBRATION PRODUCING SMOOTHER CUTS. USE IN TABLE MOUNTED ROUTER. MADE IN USA.
|
|
|
|
Bits Router - Sets
|
OLDHAM VIPER STILE AND RAIL SET
|
| Stile & Rail Set, 1/2" Shank
|
THIS MATCHED CARBIDE-TIPPED SET CUTS A COVE AND BEAD WITH FILLET PROFILE FOR STILE AND RAIL CONSTRUCTION AND GENERAL EDGE JOINING. FOR USE WITH TABLE-MOUNTED PORTABLE ROUTERS. 3/8" CUT DEPTH 1/2" SHANKS 1-5/8" OVERALL DIAMETER 22MM BEARINGS
ONE YEAR GUARANTEE AGAINST MANUFACTURER DEFECTS. MADE IN USA.
|
|
|
|
Machinery Accessories - Drill Presses
|
STURDY BRACKET CAN ADD PIN ROUTER TABLE, SANDING TABLE AND DUST COLLECTION CAPABILITIES TO YOUR DRILL PRESS
|
| Drill Press Bracket
...plus other(s)
|
HIGHLY USEFUL BY ITSELF, OUR DRILL PRESS BRACKET ALSO SERVES AS THE BASIS TO ADDITIONAL CAPABILITIES TO 12" OR LARGER BENCH TOP OR FLOOR MOUNTED DRILL PRESSES:
DRILL PRESS BRACKET: 10" WIDE X 21" LONG DIE CAST ALUMINUM BRACKET, WITH STRUCTURAL RIBBING AND GUSSETS FOR STRENGTH, SIMPLY TIGHTENS ONTO 2" TO 4" DIA. DRILL PRESS COLUMNS. LARGE KNOB WITH STRONG 1/2" STUD ALLOWS FOR COMFORTABLE GRIP AND HIGH CLAMPING FORCE - ANODIZED CLAMPING FOOT PREVENTS MARRING AND ABRASIVE PAD PREVENTS SLIPPAGE. DURABLE, BLACK ENAMEL FINISH. BRACKET MOUNTS AT 90° TO DRILL PRESS COLUMN AND CANTILEVERS OUT 14-7/8". FOUR 9/32" X 4" SLOTTED MOUNTING HOLES ACCEPT 1/4" BOLTS AND ALLOW FOR EASY TABLE MOUNTING AND POSITIONING. INCLUDES FOUR THREADED INSERTS AND FASTENERS FOR MOUNTING TABLES TO BRACKET.
DRUM SANDING TABLE KIT: INCLUDES DRILL PRESS BRACKET, DRILL PRESS TABLE AND 8.5" X 8.25 X 1/4" INSERT PLATE WITH TWO ADDITIONAL RINGS (122-228) PROVIDING 4", 2-1/4" AND 1-3/16" OPENINGS FOR EFFECTIVE DUST COLLECTION. A BROAD RANGE OF SANDING DRUM SIZES ARE AVAILABLE. INSERT RINGS HAVE SNAP LOCK TABS FOR SECURE MOUNTING. DUST HOOD WITH 3" HOSE PORT MOUNTED UNDER TABLE INSERT FOR DUST COLLECTION AT SOURCE.
PIN ROUTER TABLE KIT: INCLUDES ALL OF THE ABOVE LESS THE DUST HOOD. INSERT DRILLED IN TWO LOCATIONS FOR INCLUDED STARTER PIN; COMES WITH 1/2" AND 1/4" STYLUS/ALIGNMENT PINS. PORTER-CABLE® 690LR OR OTHER 1-1/2 HP ROUTERS RECOMMENDED; LARGER ROUTERS MIGHT NOT FIT THROUGH BRACKET.
|
|
|
|
Portable Power Tool Accessories - Dovetail Jigs
|
SET - MATCH MAKER TO FIT PORTER-CABLE 7538 & 7539
|
| Matchmaker For Pc Routers 7538/7539
...plus other(s)
|
MATCHMAKER™ HANDLES TENONING, BOX JOINT CUTTING, DOVETAILING, SHUTTER MORTISE CUTTING AND MUCH MORE. BY COMBINING A TABLE THAT MOVES 6", IN OR OUT, AND 12", LEFT TO RIGHT, WITH A ROUTER THAT MOVES UP TO 5-1/2", VERTICALLY, MANY CONVENTIONAL (AND SOME NOT SO CONVENTIONAL) JOINTS CAN BE CUT QUICKLY AND ACCURATELY - WITHIN 0.005"!
BY SIMULTANEOUSLY CONTROLLING THE POSITIONS OF THE 17-1/2" X 11-1/4" TABLE AND CUTTERHEAD, THE OPERATOR MAKES THE STYLUS FOLLOWER TRACE THE TEMPLATE WHILE THE ROUTER IS SHAPING THE WORKPIECE TO MATCH THE TEMPLATE. 6" MAXIMUM CUT DEPTH. 5"H X 10"W MAXIMUM TENON SIZE - TENONS TAKE ONLY A FEW SECONDS ON A MACHINE THAT'S SMALL ENOUGH TO FIT INTO ALMOST ANY SHOP. CHANGEOVER TIME TO SWITCH FROM ONE CUTTING OPERATION TO ANOTHER IS ABOUT TWO MINUTES. INCLUDES ALIGNMENT TOOL (113-415) TO ENSURE ACCURATE ROUTER MOUNTING (ROUTER NOT INCLUDED), CHIP GUARD, TEMPLATE HOLDER, QUICK ACTION CLAMP, FENCES FOR REPEATABLE CUTTING AND 20 MINUTE INSTRUCTIONAL VIDEOTAPE. APPROXIMATELY 15"H X 17-1/2"W X 22-1/2"D. WEIGHS 58 LBS. OPTIONAL RETROFIT ROD PAIRS ALLOW LISTED ROUTERS TO BE USED ON EXISTING MATCHMAKER™ MACHINES. INVENTED IN USA - U.S. PATENTS #4,593,735 AND #4,909,292 - ASSEMBLED IN USA.
SEE "MATCHMAKER™ IN ACTION": 20-MINUTE VIDEOTAPE (825-534) SHOWS TENONING, BOX JOINT CUTTING, DOVETAILING, SHUTTER MORTISE CUTTING AND MORE. PURCHASE PRICE REFUNDABLE ON MATCHMAKER™ ORDER OR CAN BE APPLIED TOWARDS A GIFT CERTIFICATE. IF YOU ALREADY OWN A MATCHMAKER™, CALL US AT 800-645-9292 AND WE'LL SEND YOU THE VIDEO FREE.
NO HASSLE GUARANTEE: IF FOR ANY REASON YOU ARE NOT COMPLETELY SATISFIED WITH THE MATCHMAKER™ SIMPLY RETURN IT TO US UNDAMAGED WITHIN 30 DAYS OF RECEIPT, FREIGHT PREPAID, FOR A PROMPT REFUND OF YOUR PURCHASE PRICE. YOU ALSO HAVE A ONE YEAR WARRANTY AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP. THE DETAILS OF THIS WARRANTY ARE AVAILABLE ON REQUEST.
TO HELP COMPLETE YOUR PROJECTS, MAY WE SUGGEST MATCHMAKER™ ACCESSORIES:
AIR CLAMP WITH LATCHING FOOT SWITCH - 826-077. LARGE AND SMALL PIN AND CRESCENT JOINT TEMPLATES - 878-561. MICRO-HEIGHT ADJUSTER - 889-386. ADJUSTABLE 1/2" AND 3/4" BLIND DOVETAIL TEMPLATES - 900-216. CENTERING PIN SET - 889-379. SINGLE TENON TEMPLATES - 95-801. DOUBLE TENON TEMPLATES - 95-830. SHUTTER MORTISE TEMPLATE - 95-855. ROUND TENON TEMPLATES - 95-889. DOVETAIL TEMPLATES - 95-900. BOX JOINT TEMPLATES - 95-904.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
QUICKSCRIBE™ SCRIBING SYSTEMS ARE GREAT FOR COUNTERTOP, CABINET AND PANELING INSTALLATIONS
|
| Quickscribe Router Attach
...plus other(s)
|
QUICKSCRIBE™ ROUTER ATTACHMENTS ARE DESIGNED FOR CABINETMAKERS, WOODWORKERS, CARPENTERS AND FLOORING, COUNTERTOP AND WALL PANELING INSTALLERS WHO NEED THEIR PRODUCTS TO FIT FLUSH TO WALLS OR FLOORS:
MOUNTED ONTO THE BOTTOM OF YOUR ROUTER OR LAMINATE TRIMMER (NOT INCLUDED), YOU CAN MAKE YOUR CUT IN THE SAME TIME IT USED TO TAKE TO DRAW THE CUT LINE. SCRIBE TOPS TO WALLS, BACKSPLASHES TO TOPS OR MAKE PERFECT TEMPLATES, QUICKLY AND ACCURATELY. BUILT-IN DELRIN® WHEEL ROLLS ALONG THE WALL WITHOUT MARRING, PLUS THE BIT IS CENTERED SO YOUR ROUTER/TRIMMER CAN BE ROTATED DURING CUTTING WITHOUT LOSS OF ACCURACY. MODEL 300 FITS PORTER-CABLE® 312 AND 7312 AND BOSCH 1609 OFFSET ROUTERS ONLY. MODEL CD IS FOR USE WITH A DEWALT® DW6706 ROUTER WITH OFFSET BASE OR BOSCH COLT™ ROUTER WITH PR004 OFFSET BASE ONLY. OPTIONAL SCRIBEMATE™ ROUTER ACCESSORY USES A WHEEL TO FOLLOW QUICKSCRIBE™ TEMPLATES. USE FOR VERY CLOSE FITS SUCH AS WALL TO WALL COUNTERTOPS WITHOUT SPLASHES OR CABINET ENDS (PRE-DRILLED FOR PORTER-CABLE® 690 SERIES ROUTERS). EUROSCRIBER™ IS FOR INSTALLING SCRIBE STRIPS ONTO FRAMELESS CABINETS. INSERT YOUR SCRIBE STRIP INTO THE HOLDERS, TIGHTEN THE SET SCREWS AND RUN YOUR ROUTER USING QUICKSCRIBE™ AGAINST THE WALL. THEN, REMOVE THE HOLDERS AND INSERT THE SCRIBE STRIP INTO PLACE. ONE YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
CUT PRECISE CIRCLES, MORTISES AND ARCS USING YOUR PLUNGE ROUTER
|
| Jasper Circle Jig
...plus other(s)
|
PATENTED JASPER CIRCLE GUIDES ARE EXTREMELY ACCURATE, EASY TO USE AND VERY DURABLE - PRE-DRILLED AND COUNTERSUNK, THEY ACCEPT PLUNGE ROUTERS MADE BY PORTER-CABLE®, HITACHI®, BLACK & DECKER®, BOSCH, DEWALT®, MAKITA®, FREUD®, RYOBI®, SKIL® AND SEARS®:
CNC-MACHINED, 1/4" THICK CAST ACRYLIC GUIDES HAVE SILK-SCREENED MARKINGS FOR EASY READING. 106-730 - MODEL 200 PERFECT CIRCLE GUIDE (APPROXIMATELY 13"L X 6-1/2"W) IS PRIMARILY DESIGNED FOR MAKING SPEAKER CUTOUTS AND FLUSH-MOUNTING SPEAKER DRIVERS. USE TO CUT 256 CIRCLES FROM 2-1/4" TO 18-3/16" DIA. IN 1/16" INCREMENTS - SCALE CALIBRATED FOR 1/4" ROUTER BIT. 117-785 - MODEL 270 PERFECT CIRCLE GUIDE (APPROXIMATELY 13"L X 6-1/2"W) CAN BE USED TO MAKE 180 CIRCLES FROM 7" TO 18-3/16" DIA. IN 1/16" INCREMENTS - CALIBRATED FOR 1/4" ROUTER BIT. 106-733 - MODEL 300 CIRCLE JIG (APPROXIMATELY 31"L X 6-3/4"W, TAPERING TO 2-1/4"W) IS PRIMARILY FOR MAKING TABLETOPS AND PROVIDES 184 CIRCLE CUTS FROM 7" TO 52-3/4" DIAMETER IN 1/4" INCREMENTS - CALIBRATED FOR 1/2" ROUTER BIT. 106-736 - MODEL 400 PERFECT CIRCLE GUIDE (APPROXIMATELY 7-1/2" DIA.) CAN BE USED TO MAKE 105 CIRCLES FROM 1" TO 7-1/2" DIA. IN 1/16" INCREMENTS - CALIBRATED FOR 1/4" ROUTER BIT. 117-791 - MODEL 500 BASE PLATE ADAPTER (6-5/8" DIA X 3/8" THICK CAST ACRYLIC) IS USED TO CONVERT YOUR EXISTING ROUTER BASE TO ACCEPT PORTER-CABLE®-STYLE GUIDE BUSHINGS AND ACCESSORIES - ADAPTER FITS SEARS® 315-175-040, 315-175-050, 315-175-070, 315-175-060, 315-275-000, 315-275-100 AND 315-275-110, ALL RYOBI®, MAKITA®, HITACHI® M8V, TR12 AND M12V, BOSCH 1615, DEWALT® 621/625, FEIN® FT-1800, ELU 177 AND FREUD® FT2000E. USA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
MAXIMIZE THE VERSATILITY OF YOUR ROUTER WITH PORTER-CABLE® TEMPLATE GUIDES
|
| 3/4" Template Guide
...plus other(s)
|
TEMPLATE GUIDES FIT ALL PORTER-CABLE®, ROCKWELL®, MOST BLACK & DECKER®, SKIL®, MILWAUKEE® AND OTHER ROUTERS BY USING ADAPTERS:
42024 - LOCK FACE ROUTING. 42027 - 1/2" DOVETAILING AND GENERAL ROUTING. 42033 - GENERAL ROUTING. 42036 - GENERAL ROUTING. 42042 - HINGE BUTT ROUTING. 42045 - FOR USE WITH STANLEY T-3 TEMPLATE. 42054 - 1/4" DOVETAILING. 42237 - LOCK NUT FOR ALL TEMPLATE GUIDES. 42000 - SEVEN-PIECE TEMPLATE GUIDE KIT INCLUDES ALL TEMPLATE GUIDES PLUS TWO LOCK NUTS. RA1110 - BOSCH STANDARD ROUTER ADAPTER. RA1100 - BOSCH 1617 ROUTER ADAPTER.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED. NOTE: DIMENSION "D" REFERS TO THE TEMPLATE GUIDE "DISTANCE PAST BASE."
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
EASILY AND ACCURATELY INSTALL DOOR HINGES USING YOUR ROUTER AND THE PORTER-CABLE® HINGE BUTT TEMPLATE KIT
|
| Hinge Butt Template Kit
...plus other(s)
|
THE PORTER-CABLE® MODEL 59381 HINGE BUTT TEMPLATE KIT IS EASY TO USE AND PERMITS MORTISING DOORS AND JAMBS FROM 78" TO 84" LONG AND ENSURES PERFECTS MATCHING OF HINGE LOCATIONS:
FEATURES INCLUDE SPRING LOADED NAILS, THAT STAY UP PRIOR TO DRIVING, AND CAN BE REMOVED WITH CLAW HAMMER; THICKNESS PINS TO MOUNT DOORS TO JAMB WITHOUT JAMB STOPS; END GAUGES FOR EACH END OF THE TEMPLATE; AND A FULL LENGTH LOCATOR WITH EACH TEMPLATE SECTION. INCLUDES TEMPLATES FOR 6'6", 6'8" AND 7'0" JAMBS AND DOORS; A HINGE TEMPLATE CAN BE ADJUSTED FOR CUTTING 3" TO 6" MORTISES FOR COMMON HINGE SIZES. ALSO INCLUDES 1/2" DIA. MORTISING BIT, TEMPLATE GUIDE, LOCK NUT, CARRYING CASE AND INSTRUCTION MANUAL. 878-955 - MODEL 517 LOCK FACE TEMPLATE IS USED TO QUICKLY ROUT LOCK FACES INTO DOORS AFTER THE BOX LOCK MORTISE HAS BEEN COMPLETED; AUTOMATICALLY SELF CENTERING AND SELF BEVELING.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
STURDY ALUMINUM PROPLATES ADD VERSATILITY AND STRENGTH TO ROUTER TABLES
|
| Alum. Proplate 2", 2.625", 3.625"
...plus other(s)
|
BENCH DOG® ALUMINUM PROPLATES SUPPORT THE LARGEST ROUTERS AND STAND UP TO THE HEAVIEST SHAPING CUTS. HARD ANODIZED ALUMINUM FOR LONG WEAR. 8.25" X 11.75" X 3/8" W/3/8" RADIUS CORNERS. INCLUDE TWO INSERT RINGS FOR 2", 2.625" & 3.75" BIT HOLE OPENINGS AND 4 STARTING PIN LOCATIONS (STARTING PIN INCLUDED). AVAILABLE WITHOUT ROUTER MOUNTING HOLES (113-708) OR PREDRILLED (113-714) FOR PORTER-CABLE®, BOSCH 1617/18, DEWALT® 621-625, MAKITA 1100/01 AND FEIN® RT1800 ROUTERS. MOUNTING SCREWS INCLUDED WITH PREDRILLED PLATES. NOTE: USE REQUIRES D-HANDLE REMOVAL FROM ALL ROUTERS FOR USE IN BENCH DOG® ROUTER TABLES. USA. OPTIONAL ACCESSORIES:
(113-765) - PORTER-CABLE® GUIDE BUSHING ADAPTER AND CENTERING CONE. (113-768) - PROGUARD® COMBINATION FREEHAND BIT GUARD, STARTING PIN/FULCRUM & DUST PORT. (113-771) - ZERO CLEARANCE INSERT (SUPPORTS WORKPIECES WHEN USING SMALL ROUTER BITS.).
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
COUNT ON MAST-R-LIFT™ FOR PRECISE HEIGHT ADJUSTMENTS WITH YOUR TABLE MOUNTED ROUTER
|
| Mast-r-lift 9-1/4"x11-3/4"
...plus other(s)
|
DESIGNED FOR CABINETMAKERS, FURNITURE MAKERS AND CUSTOM WOODWORKERS, AN ANODIZED ALUMINUM MAST-R-LIFT™ INSERT PLATE PROVIDES YOUR TABLE MOUNTED ROUTER (NOT INCLUDED) WITH A FULL 3-3/4" OF PRECISION VERTICAL TRAVEL:
123-296 - 9-1/4" X 11-3/4" MODEL 02101 WAS SPECIFICALLY DESIGNED FOR PORTER-CABLE® 7518/7519 ROUTERS AND FOR SIMILAR CYLINDRICAL MOTOR HOUSINGS WITH USE OF OPTIONAL REDUCER COLLAR 123-308 . 123-302 - 8-1/4" X 11-3/4" MODEL 02102 FITS BENCH DOG® ROUTER TABLES. BOTH INSERT PLATES FEATURE SPEED CRANKS WITH TALL HANDLES TO CLEAR FENCE TOPS WHEN MAKING ADJUSTMENTS; 3-5/8" DIA.TAB-LOC™ CENTER HOLES ARE MACHINED TO ACCEPT UP TO 3-1/2" RAISED PANEL BITS. 1-1/2" INSERT RINGS AND WRENCHES, LEVELING ADJUSTERS, STARTING PINS AND HEX WRENCHES INCLUDED. 123-308 - OPTIONAL MODEL 02111 3-1/2" DIA. REDUCER COLLAR ACCOMMODATES PORTER-CABLE® 690, BOSCH 1617/1618 AND DEWALT® 610 ROUTERS. 123-305 - OPTIONAL TEMPLATE MODEL 03003 IS ONLY USED TO FOR CUTTING AN OPENING FOR THE CUSTOM INSTALLATION OF 123-296 (MAST-R-LIFT™ MODEL 02101). CANADA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
IMPROVED PORTER-CABLE® DOOR HINGE TEMPLATE LETS YOU ROUT BOTH DOOR AND DOOR FRAME HINGES
|
| 59370 Door Hinge Template
...plus other(s)
|
THE PORTER-CABLE® 59370 DOOR HINGE TEMPLATE AND YOUR ROUTER MAKE INSTALLATIONS FASTER AND EASIER BY ACCOMMODATING FIVE DOOR THICKNESSES AND EIGHT HINGE SIZES:
THICKNESSES INCLUDE 1-3/8", 1-3/4", 2", 2-1/4" AND 2-1/2". HINGES RANGE FROM 2-1/2" TO 6" INCLUSIVE, IN 1/2" INCREMENTS. TWO, QUICK ADJUST RATCHETING ROUTER BIT GUIDES HANDLE 1/4", 5/8" RADIUS AND SQUARE CORNER HINGES (CORNER CHISEL REQUIRED - NOT INCLUDED). COMPLEMENTARY STRIKE AND LATCH TEMPLATE 59375 (SOLD SEPARATELY) HAS A DOUBLE WINDOW DESIGN AND THREE ADJUSTABLE INSERTS TO HANDLE 1" AND 1-1/8" LATCH PLATE WIDTHS AND 2-1/4" AND 2-3/4" STRIKE PLATE SIZES - TEMPLATE CENTER MARKS ENABLE QUICK AND SIMPLE ALIGNMENT. EACH TEMPLATE COMES WITH FOUR POSITIVE PLACEMENT LOCK-IN PINS, TWO DOUBLE HEADED NAILS, HSS BEARING GUIDED ROUTER BIT, INSTRUCTION MANUAL AND QUICK REFERENCE INSTRUCTION CARD. LOCK-IN PINS ENABLE QUICK AND SECURE PLACEMENT OF TEMPLATE ONTO DOOR OR JAMB. EXTENDED TEMPLATE PLATFORM PROVIDES ADDED STABILITY FOR YOUR ROUTER. DOUBLE HEADED NAILS ENSURE EASY REMOVAL FROM DOOR AND FRAME. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
ROUT-R-TABLE™ WITH MAST-R-LIFT EXCEL™ AND MICRODIAL™
|
| Router Table W/mast Lift & Microdi
...plus other(s)
|
THE NEW JESSEM 02240 ROUT-R-TABLE™ WITH MAST-R-LIFT EXCEL™ IS A FULLY LOADED ROUTER TABLE SYSTEM WITH ALL OF THE COMPONENTS MATCHED UP TO MEET YOUR SPECIFIC REQUIREMENTS:
DESIGNED FOR PORTER-CABLE® 7518 AND OTHER ROUTERS WITH REDUCE COLLARS OR REDUCER PLATES. MAST-R-FENCE™, BLACK PHENOLIC MAST-R-TOP™ AND ROUT-R-TABLESTAND™ INCLUDED. THE MORE ECONOMICAL 02340 ROUT-R-TABLE™ WITH ROUT-R-LIFT FX™ ALSO COMES WITH MAST-R-FENCE™, BLACK PHENOLIC MAST-R-TOP™ AND ROUT-R-TABLESTAND™. DESIGNED FOR PORTER-CABLE® 690/890, BOSCH 1617/1618 AND DEWALT® 610/616/618 ROUTERS. COMPONENTS ALSO AVAILABLE SEPARATELY. ONE YEAR MANUFACTURER'S WARRANTY. CANADA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
ROUT-R-LIFT FX™ PROVIDES MAST-R-LIFT™ PERFORMANCE AT A MORE AFFORDABLE PRICE
|
| Rout R Lift Fx 02302
|
THE JESSEM 02302 ROUT-R-LIFT FX™ PROVIDES YOUR FIXED BASE ROUTER (NOT INCLUDED) WITH PRECISE ABOVE TABLE HEIGHT ADJUSTMENT AND BIT CHANGES:
DESIGNED FOR PORTER-CABLE® 690/890, BOSCH 1617/1618 AND DEWALT® 610/616/618 ROUTERS. CAM-LOCK CLAMP DESIGN FOR QUICK AND EASY "PLUG-N-ROUT" MOTOR CHANGES. 9-1/4" X 11-3/4" TOP PLATE IS MACHINED FROM 3/4" THICK SOLID PHENOLIC. 8-POSITION SET SCREW PLATE LEVELING. UNDERCARRIAGE IS PRECISION MACHINED PREMIUM 6061 ALUMINUM, ANODIZED RED AND FASTENED WITH SOLID BRASS FITTINGS. COMES WITH 1-1/2" TAB-LOC™ INSERT RING AND WRENCH, STARTING PIN, HEX KEY AND HARDWARE. ONE YEAR MANUFACTURER'S WARRANTY. CANADA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
PROLIFT™ ROUTER LIFT HAS 0.001" ACCURACY WITHOUT THE FUSS OF EXPENSIVE DIGITAL READOUTS
|
| Prolift Router Lift System
...plus other(s)
|
|
THE ONLY DIRECT-DRIVE LIFT BUILT AROUND THE ROBUST PORTER-CABLE® MODEL 7518 ROUTER. (SMALLER MOTORS REQUIRE ADAPTERS SOLD SEPARATELY SEE ROUTER COMPATIBILITY BELOW). DIRECT DRIVE MECHANISM ELIMINATES THE COMPLICATION AND SLOOP ASSOCIATED WITH BELTS, CHAINS AND GEARS. RAISE THE COLLET ABOVE THE TABLE FOR EASY BIT CHANGES OF ANY SIZE. NO OTHER ROUTER LIFT HAS FASTER LINEAR MOTION. ALUMINUM HOUSING WITH BUILT-IN COOLING FINS KEEP YOUR ROUTER RUNNING COOL. 5.5" VERTICAL TRAVEL (VARIES SLIGHTLY WITH INSTALLATION). HEIGHT ADJUSTER HAS 0-1/8 SCALE, 0.0025" INCREMENTS. PRECISION GROUND SOLID STEEL PLATE (8-1/4" X 11-3/4") FITS ALL BENCH DOG ROUTER TABLES. INCLUDES CHROME PLATED SPEED WRENCH, DRIVE SOCKET AND FINE-ADJUSTMENT GAUGE. ROUTER COMPATIBILITY: PORTER-CABLE 7518, 7519 REQUIRE NO ADAPTER. BOSCH 1617/1618 SERIES, PORTER-CABLE 690/890 SERIES AND DWWALT 610, 616/618 SERIES REQUIRE 40-002 ADAPTER. MAKITA RF1100/1101 SERIES REQUIRE 40-003 ADAPTER. FOR FIXED BASE ONLY. NOT FOR PLUNGE ROUTERS. MADE IN USA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
MAXIMIZE THE VERSATILITY OF YOUR ROUTER WITH A PORTER-CABLE® TEMPLATE GUIDE SET
|
| 7 Piece Router Guide Bushing Kit
...plus other(s)
|
SEVEN PIECE TEMPLATE GUIDE SET INCLUDES 3/4", 7/16", 1/2", 3/8", 13/16", 5/8" AND 5/16" GUIDES. FIT ALL PORTER-CABLE®, ROCKWELL®, MOST BLACK & DECKER®, SKIL®, MILWAUKEE® AND OTHER ROUTERS WITH ADAPTERS (TEMPLATE GUIDES ALSO AVAILABLE SEPARATELY):
800-812 - 7 PIECE GUIDE BUSHING SET WITH 2 LOCK NUTS. 815-769 - BOSCH STANDARD ROUTER ADAPTER. 108-005 - 2 LOCK NUTS FOR USE WITH GUIDE BUSHINGS. 107-135 - 3/4" TEMPLATE GUIDE. 108-004 - 7/16" TEMPLATE GUIDE. 107-138 - 1/2" TEMPLATE GUIDE. 107-141 - 3/8" TEMPLATE GUIDE. 107-144 - 13/16" TEMPLATE GUIDE. 957-347 - 5/8" TEMPLATE GUIDE. 938-048 - 5/16" TEMPLATE GUIDE.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
SET - PC GUIDE BUSHING SET - 5/8"", 7/16"" AND NUT
|
| Pc Guide Bushing Set
...plus other(s)
|
COMBINE THE LEIGH D4R-24 DOVETAIL JIG WITH YOUR FAVORITE 1/2" OR 8MM COLLET ROUTER AND YOU CAN EASILY PRODUCE LARGE AND SMALL THROUGH, ANGLED THROUGH, HALF BLIND, RABBETED HALF BLIND, END-ON-END AND SLIDING DOVETAIL JOINTS:
JIG CAN ACCOMMODATE BOARDS UP TO 24" WIDE X 1-1/2" THICK WITH INFINITE PIN, TAIL WIDTH AND SPACING ADJUSTMENTS FOR A CLASSIC HAND CUT LOOK. INCLUDES 1/2" DIA. 8° DOVETAIL, 5/16" DIA. STRAIGHT AND 1/2" DIA. 14° DOVETAIL BITS (8MM SHANKS), 7/16" O.D. UNIVERSAL GUIDE BUSHING, 1/2"-TO-8MM COLLET REDUCER, USER GUIDE, INSTRUCTIONAL DVD, CAM-ACTION SPEED CLAMPS, CROSSCUT/SLIDING DOVETAIL GUIDE BAR, SQUARE DRIVER AND ASSEMBLY WRENCH. REQUIRES 7/16" AND 5/8" BUSHINGS (NOT INCLUDED).
M2 LEIGH MULTIPLE MORTISE AND TENON ATTACHMENT ATTACHES DIRECTLY TO THE D4R-24 AND REPLACES DOVETAILING FINGERS SO YOU CAN CUT PERFECT MULTIPLE MORTISE AND TENON JOINTS FROM 5/16" X 5/8" TO 1-1/2" X 2-1/2": CUSTOMIZE THE FIT AND DESIGN TO SUIT YOUR REQUIREMENTS AND SELECT FROM THREE CORNER RADII (5/32", 1/4" OR SQUARE (WITH CHISELING). 1/2" HSS SPIRAL UPCUT BIT AND INSTRUCTIONS INCLUDED.
ISOLOC TEMPLATES ARE PRECISION CNC-MACHINED ALUMINUM ALLOY AND COME WITH AN INSTRUCTION MANUAL AND PATENTED 5-PIECE VGS VARIABLE TEMPLATE GUIDEBUSH SYSTEM WITH NOMINAL 1/2" OD GUIDE.
AC-D24 ROUTER BIT AND VACUUM ATTACHMENT ACCESSORY KIT AND THE VRS-D24 VACUUM AND ROUTER SUPPORT PROVIDE CONVENIENCE AND VERSATILITY.
FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
PORTER-CABLE® ROUTER DUST COLLECTORS CAN HELP CLEAN UP YOUR SHOP
|
| Router Dust Collector (5-3/4)
...plus other(s)
|
AVAILABLE IN TWO SIZES, PORTER-CABLE® ROUTER DUST COLLECTORS CAN BE USED TO ADD DUST COLLECTION CAPABILITIES TO EXISTING ROUTERS - IDEAL FOR USE DURING PLUNGE ROUTING:
922-436 - MODEL 39690 DUST COLLECTOR FITS MODEL 100, 690, 691, 693, AND 7529 ROUTERS WITH 5-3/4" DIA. SUB-BASES. INCLUDES SUB-BASE WITH DUST COLLECTION ATTACHMENT - 1/2" THICK SUB-BASE INCLUDES DUST COLLECTION NOZZLE TO ATTACH TO MOST 1-1/2" VACUUM HOSES. FOUR ATTACHMENT POINTS ARE PROVIDED AND THE DUST COLLECTION CUP IS ADJUSTABLE THROUGH A 55° ARC TO LOCATE CUP AND HOSE TO MEET YOUR ROUTING REQUIREMENTS. 2-7/8" CENTER HOLE ALLOWS ROUTING WITH LARGER DIAMETER BITS WITHOUT DAMAGING SUB-BASE. METAL TEMPLATE-GUIDE INSERT ACCEPTS STANDARD PORTER-CABLE® TEMPLET GUIDES. CLEAR DUST SHIELD LETS YOU SEE AREA BEING ROUTED WHILE MAINTAINING DUST COLLECTION CAPABILITY.
922-443 - MODEL 39700 DUST COLLECTOR FITS MODEL 7518, 7519, 7536, 7537, 7538 AND 7539 ROUTERS WITH 7" DIA. SUB-BASES. OTHER THAN SIZE, SIMILAR TO MODEL 39690.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
PORTER-CABLE® MICRO-ADJUSTABLE ROUTER EDGE GUIDE ELIMINATES THE FLEX IN ORDINARY GUIDES
|
| Router Edge Guide (100-693)
...plus other(s)
|
AVAILABLE IN TWO MODELS, PORTER-CABLE® MICRO-ADJUSTABLE ROUTER EDGE GUIDES PROVIDE ADDITIONAL ACCURACY AND FIT ALL OF THE COMPANY'S ROUTERS:
922-450 - MODEL 42690 EDGE GUIDE FITS ALL MODEL 690 SERIES ROUTERS: ANODIZED EXTRUDED ALUMINUM BODY FOR STRENGTH AND DURABILITY. SEPARATE SLIDES LET YOU LOCK THE GUIDE AT A GENERAL DIMENSION, THEN MICRO-ADJUST FOR EXACT ROUTING. ADJUSTMENTS CAN BE SET QUICKLY AND ACCURATELY. LARGE FENCE FOR SMOOTH HANDLING WHEN ROUTING.
922-457 - MODEL 42700 EDGE GUIDE IS SIMILAR TO MODEL 42690 BUT FITS ALL 7500 SERIES ROUTERS.
|
|
|
|
symbol next to the category that matches your desired product and select a sub-category link.
