|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
RAPID ACTION, SECURE HOLDING PIPE CLAMP FIXTURES
|
| #50 Pipe Clamp Fixture
...plus other(s)
|
THE FAMOUS "PONY®" #50 PIPE CLAMP FIXTURE ATTACHES TO ANY LENGTH OF 3/4" DIA. THREADED BLACK PIPE:
TAIL STOP HAS A MULTIPLE DISC CLUTCH THAT GRIPS THE PIPE AT ANY POINT BUT RELEASES, EASILY. 5/8" COLD DRAWN STEEL SCREW - 1-3/4" SQUARE CLAMP FACE. LOAD LIMITS - REGULAR PIPE 2,800 LBS., EXTRA HEAVY PIPE 3,800 LBS. (PIPE NOT INCLUDED). 125-025 - #52 FIXTURE HAS SIMILAR FEATURES BUT IS DESIGNED FOR 1/2" DIA. PIPE. 125-032 - PROTECT YOUR WORKPIECE WITH CLAMP PADS SPECIALLY DESIGNED FOR "PONY®" CLAMPS. SOLD IN SETS OF FOUR, THEY PROVIDE A PROTECTIVE CUSHION WITHOUT MARRING, STAINING, STICKING OR SLIPPING. 821-721 - ALSO SOLD IN SETS OF FOUR, CLAMP SADDLES HELP HOLD PIPE CLAMPS IN POSITION. USA.
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
PONY® DOUBLE PIPE CLAMP FIXTURES HOLD TIGHT
|
| #53 Double Pipe Clamp Fixture
|
THE "PONY"® #53 DOUBLE PIPE CLAMP FIXTURE IS HIGHLY RECOMMENDED FOR GLUING UP FLAT STOCK:
BY EXERTING EQUAL PRESSURE ON BOTH SIDES OF THE WORK, THE CLAMP ELIMINATES BUCKLING ENCOUNTERED WITH SINGLE PIPE CLAMPS. MALLEABLE IRON CASTINGS, 5/8" COLD DRAWN STEEL SCREW; 3-1/4" BETWEEN PIPES, 2-1/4" WIDE JAWS. ATTACHES TO TWO LENGTHS OF 1/2" DIA. THREADED BLACK PIPE (PIPE NOT INCLUDED). USA.
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
STEEL PIPE CLAMP FIXTURES HAVE ALL ADJUSTMENTS AT ONE END FOR CONVENIENCE
|
| #56 Steel Bar-clamp Fixture
|
IDEAL FOR COUNTERTOPS, CABINETS AND WORK IN TIGHT QUARTERS, "PONY®" STEEL PIPE CLAMP FIXTURES FIT 3/4" BLACK PIPE WITH THREADED ENDS (NOT INCLUDED) AND ARE VERY HANDY BECAUSE ALL ADJUSTMENTS ARE WITHIN EASY REACH:
CAN BE REVERSED TO PUSH WORK APART. 5/8" DIA. STEEL SCREW WITH ACME THREADS; WING NUT HANDLE; MULTIPLE DISC CLUTCH. 2-1/2" DEEP REACH DESIGN. IMPORTED.
|
|
|
|
Clamps And Vises - Bench Vises
|
PONY® LIGHT-DUTY VISES
|
| Light Duty Clamp On Vise
...plus other(s)
|
"PONY"® LIGHT-DUTY VISES CAN BE TAKEN WITH YOU OR MOUNTED ONTO YOUR WORKBENCH. ALL FEATURE SERRATED JAWS, SLIDING-PIN HANDLES AND TOUGH, BAKED-ON ENAMEL FINISHES:
13025 CLAMP-ON VISE MOUNTS EASILY AND SECURELY ONTO EDGES UP TO 2" THICK. PLATED-STEEL DOUBLE GUIDE BARS ALLOW FOR SMOOTH OPERATION. 23530 AND 24545 BENCH VISES SWIVEL A MINIMUM OF 270° ON THEIR SQUARE, FOUR-HOLE BASES. STURDY STEEL JAW FACES, GROUND AND POLISHED ANVILS, PERMANENT PIPE JAWS AND BUILT-IN FORMING HORNS. IMPORTED.
|
|
|
|
Clamps And Vises - Not Listed Elsewhere
|
BAND CLAMPS FOR AWKWARD OR IRREGULAR SHAPED CLAMPING PROJECTS
|
| Light Duty Band Clamp
...plus other(s)
|
CLAMP A VARIETY OF ODD SHAPES - ROUND, POLYGON, SQUARE AND MUCH MORE WITH THESE ADJUSTABLE BAND CLAMPS:
1215 - LIGHT DUTY "PONY®" CLAMP IS SUITABLE FOR MOST GENERAL PROJECTS: 1" X 15' NYLON BAND; 1,000 LBS. PROOF TEST. BLACK, RUST RESISTANT FINISH - STEEL FRAME. ALUMINUM CAM AND PLATED STEEL WRENCH. 4 PLATED STEEL CORNERS. IMPORTED.
HEAVY DUTY "JORGENSEN®" BAND CLAMPS SOLVE THE SPECIAL PROBLEM OF CLAMPING LARGE IRREGULAR SHAPES:
6210 - 2" BY 10' CANVAS BAND. 6220 - 2" BY 20' CANVAS BAND. MALLEABLE IRON FRAME WITH ORANGE BAKED ENAMEL FINISH. 5/8" DIA. COLD DRAWN STEEL SCREW WITH DEEP, SMOOTHLY CUT ACME THREADS. BALANCED CRANK HANDLE. USA.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
"PONY®" RAPID ADJUST BAND CLAMP EASILY HOLDS IRREGULAR SHAPES
|
| Rapid Acting Band Clamp
|
JUST THE TOOL TO HOLD DRAWERS, CHAIRS OR OTHER ITEMS FOR FASTENING OR GLUE UP, THE "PONY®" MODEL 1223 RAPID ACTING BAND CLAMP:
FEATURES 1" X 15' NYLON BAND, 1" X 1" NON-MARRING PLASTIC JAWS FOR SOLID CORNERS AND METAL LEVERS FOR QUICK ADJUSTMENT OR RELEASE OF THE CLAMPING BAND. FIRMLY HOLDS ROUNDS, POLYGONS, RECTANGLES OR SQUARES. LARGE COMFORTABLE HANDLE. IMPORTED.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
RAPIDLY CLAMP MITER OR BUTT JOINTS
|
| Rapid Acting Miter Clamp
|
WITH THE "PONY®" MODEL 9170 RAPID ACTING MITER CLAMP, YOU CAN FIRMLY HOLD MITER OR BUTT JOINTS, LEAVING THE JOINT FULLY EXPOSED FOR DOWELLING, GLUING OR NAILING:
2-3/4"W X 1"H JAWS HAVE QUICK RELEASE FEATURE FOR EASY ADJUSTMENT - DIE CAST FRAME FOR STRENGTH. WILL HOLD MATERIAL UP TO 2-3/4" WIDE. ADJUSTING HANDLES HAVE ACME THREADS. IMPORTED.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
90° ANGLE CLAMP IDEAL FOR FRAMING AND CABINET ASSEMBLY
|
| 90 Degree Angle Clamp
|
THE DURABLE "PONY®" MODEL 9180 90° ANGLE CLAMP SECURELY HOLDS MITER, BUTT AND T-JOINTS FOR GLUE UP OR FASTENING:
2-1/2" MITER OR BUTT JOINT CAPACITY - 1-1/8" T-JOINT CAPACITY. NON-MARRING PLASTIC COATED DIE CAST JAWS - REAR JAW SWIVELS FOR EASY ADJUSTMENT ON DIFFERENT MATERIAL THICKNESS. LARGE HANDLE WITH 4-1/2" STEEL SCREW AND ACME THREAD FOR STRENGTH. IMPORTED.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
PONY® 3-WAY EDGING CLAMP MAKES APPLYING EDGING FASTER AND EASIER
|
| 3-way Edge Clamp
|
THE FAMOUS "PONY®" #3325 3-WAY EDGING CLAMP IS PREFERRED FOR EDGE CLAMPING APPLICATIONS. WIDELY USED FOR REPAIRING MOLDING, DECORATIVE TRIM, COUNTERTOP EDGING AND VENEER STRIPS:
HEAT TREATED, PEARILITIC AND/ORDUCTILE IRON FRAMES; BRIGHT PLATED FINISH, RIBBED TO RESIST SIDE STRAIN. COLD-DRAWN STEEL SCREWS WITH SMOOTHLY ROLLED THREADS. STEEL SLIDING-PIN HANDLES. BRIGHT PLATED STEEL SWIVELS; SECURELY FASTENED TO SCREW AND REVOLVES FREELY. 2-1/2" OPENING CAPACITY WITH 800 LB. CLAMPING PRESSURE. USA.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
REVOLUTIONARY DESIGNS GIVE YOU SERIOUS, ONE HANDED CLAMPING FORCE
|
| Pony 1-1/2" Isd Hand Clamp
...plus other(s)
|
CONVENIENCE WITHOUT SERIOUS CLAMPING POWER THAT HAS ALWAYS BEEN THE TRADEOFF WITH ONE HANDED CLAMPS. ALL OF THAT HAS CHANGED WITH THE "JORGENSEN"® BAR/SPREADER CLAMP AND THE SPRING LOADED "PONY®" HAND CLAMP, WHICH OFFER QUICK, EASY, ONE HANDED CLAMPING PLUS THE PRESSURE YOU COULDNT APPLY BEFORE:
DURABLE COMPOSITE COMPONENTS FOR LONGER LIFE. HANDLES DESIGNED FOR COMFORT - NON-MARRING JAWS TO PROTECT YOUR WORK. OUR 6" CLAMP SET INCLUDES (2) 6" ONE HANDED BAR CLAMPS PLUS A 25' JORGENSON TAPE MEASURE
|
|
|
|
Advanced Search Tools
Browse
will
