|
|
|
Machinery Accessories - Lathes
|
ONEWAY CHUCK ADAPTERS
|
| 3/4"-16tpi Adapter, Oneway/talon
...plus other(s)
|
ONEWAY CHUCK ADAPTERS FIT ONEWAY CHUCKS TO VARIOUS LATHE SPINDLES. THEY ALSO ALLOW YOU TO SWITCH FROM ONE LATHE TO ANOTHER WITHOUT BUYING SEVERAL CHUCKS. FULLY MACHINED IN ONE SET UP, THE UNIQUE TAPER-LOCK DESIGN IS GUARANTEED TO RUN TRUE TO YOUR LATHE SPINDLE AND THE POSSIBILITY OF THE ADAPTOR LOOSENING OR SEPARATING FROM THE CHUCK BODY IN NORMAL USE OR WHEN REVERSING THE LATHE HAS BEEN SUCCESSFULLY ELIMINATED:
ONEWAY/TALON ADAPTERS FIT BOTH CHUCKS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCKS - 959-585. TALON CHUCKS - 959-627. STRONGHOLD CHUCKS - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY SPIGOT JAWS
|
| Smooth Spigot Jaws, Oneway/talon
...plus other(s)
|
MACHINED LONG AND DEEP, ONEWAY SPIGOT JAWS ARE DESIGNED FOR GRIPPING SMALL SPIGOTS WITH EXTRA HOLDING POWER:
STRONGHOLD SPIGOT JAWS HAVE SERRATIONS ON INSIDE AND OUTSIDE. ONEWAY/TALON SPIGOT JAWS HAVE SERRATIONS ON THE OUTSIDE ONLY. AVAILABLE IN PROFILED AND SMOOTH. NOT FOR USE WITH WOODWORM SCREW. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #3 JAWS
|
| #3 Smooth Jaws, Talon
...plus other(s)
|
DESIGNED FOR AVERAGE TO HEAVY CUTTING APPLICATIONS, ONEWAY #3 JAWS WILL ACCOMMODATE MEDIUM TO LARGE SIZED TURNINGS. PROFILED JAWS WILL HOLD ROUND AND SQUARE END STOCK WHILE SMOOTH JAWS ARE DESIGNED FOR ROUND STOCK ONLY:
PROFILED JAWS HAVE INTERNAL SERRATIONS FOR BETTER GRIPPING POWER. SMOOTH JAWS HAVE SMOOTH DOVETAILS TO HELP MINIMIZE SURFACE MARRING. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY FLAT JAWS
|
| Flat Jsws, Oneway
...plus other(s)
|
MAKE CUSTOM JAWS AND MOUNTS BY SCREWING BLOCKS OF WOOD ONTO THE ONEWAY FLAT JAWS AND TURNING THEM TO THE DESIRED SHAPE:
NO CAPACITIES RECOMMENDED. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY JUMBO JAWS
|
| Mini Jumbo Jaws, Oneway/talon
...plus other(s)
|
MADE OF MACHINED ALUMINUM, ONEWAY JUMBO JAWS HAVE STANDARD RUBBER BUTTONS TO HOLD TURNINGS FOR BOTTOM FINISHING. ALSO USED FOR HOLDING OUT-OF-ROUND OBJECTS OR MOUNTING SPECIALTY HOLDING JIGS:
MINI-JUMBO JAWS FIT LATHES WITH 10" SWINGS AND LARGER. STANDARD JUMBO JAWS FIT LATHES WITH 12" SWINGS AND LARGER. MEGA-JUMBO JAWS FIT LATHES WITH 14" SWINGS AND LARGER. WOODEN "FALSE-JAW" JIGS CAN BE DESIGNED AND USED ON JUMBO JAWS FOR PRECISION FINISHING AND OTHER APPLICATIONS. IMAGE SHOWS JUMBO JAWS ON TALON CHUCK. ACCESSORY BUTTON SETS FIT ALL JUMBO JAWS. CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY INTERNAL STEP JAWS
|
| Internal Step Jaws
|
DESIGNED SPECIFICALLY FOR SMALLER TURNINGS, ONEWAY INTERNAL STEP JAWS WILL EXPAND INTO TURNED RECESSES FOR LIGHT CUTTING ON SMALL TO MEDIUM SIZED TURNINGS:
JAWS HAVE THREE SEPARATE DOVETAIL SHAPED STEPS. THE INTERIOR JAWS HAVE SERRATIONS FOR HOLDING SMALL SPIGOTS. NOT AVAILABLE FOR STRONGHOLD CHUCK. NOT FOR USE WITH WOODWORM SCREW. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #2 JAWS
|
| #2 Profiled Jaws, Oneway/talon
...plus other(s)
|
DESIGNED FOR LIGHTER CUTTING APPLICATIONS, ONEWAY #2 JAWS WILL ACCOMMODATE SMALL TO MEDIUM SIZED TURNINGS. PROFILED JAWS WILL HOLD ROUND AND SQUARE END STOCK WHILE SMOOTH JAWS ARE DESIGNED FOR ROUND STOCK ONLY:
PROFILED JAWS HAVE INTERNAL SERRATIONS FOR BETTER GRIPPING POWER. SMOOTH JAWS HAVE SMOOTH DOVETAILS TO HELP MINIMIZE SURFACE MARRING. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #2 TOWER JAWS
|
| #2 Profiled Tower Jaws, Oneway/tal
...plus other(s)
|
WITH INCREASED DEPTH, ONEWAY PROFILED #2 TOWER JAWS PROVIDE THE GRIPPING STRENGTH NECESSARY FOR HOLDING HEAVIER MEDIUM SIZED BOWLS:
1-1/4" DEEP JAWS AND INTERNAL SERRATIONS ADD EXTRA GRIPPING POWER FOR HOLDING LARGER SPIGOTS AND SQUARE END STOCK. TENON HOLDING DOVETAILS ON BOTH THE INSIDE AND OUTSIDE END OF THE JAWS GIVE MORE CLEARANCE WHEN WORKING CLOSE TO THE CHUCK. CHUCK JAW TRAVEL TABLE BELOW SHOWS COMPRESSION AND EXPANSION DIMENSIONS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #3 TOWER JAWS
|
| #3 Profiled Tower Jaws, Oneway/tal
...plus other(s)
|
ONEWAY PREMIUM PROFILED #3 TOWER JAWS PROVIDE MAXIMUM HOLDING POWER FOR LARGER TURNINGS:
1-1/4" DEEP JAWS PROVIDE THE POWER AND STRENGTH NECESSARY FOR HOLDING LARGE SIZED BOWLS. THE INTERNAL SERRATIONS ADD EXTRA GRIPPING POWER FOR HOLDING LARGER SPIGOTS AND SQUARE ENDED SPINDLES. TENON HOLDING DOVETAILS ON BOTH THE INSIDE AND OUTSIDE END OF THE JAWS GIVE MORE CLEARANCE WHEN WORKING CLOSE TO THE CHUCK. CHUCK JAW TRAVEL TABLE BELOW SHOWS COMPRESSION AND EXPANSION DIMENSIONS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY CHUCK SPURS
|
| 1" Chuck Spur Center
...plus other(s)
|
NO NEED TO REMOVE YOUR CHUCK FROM THE LATHE. JUST INSERT THE ONEWAY CHUCK SPUR IS ANY SUITABLE CHUCK AND YOU'RE READY TO GO. THE 1/2" CHUCK SPUR IS DESIGNED FOR SMALL TURNINGS AND SPINDLES LESS THAN 1" DIAMETER WHILE THE 1" CHUCK SPUR WILL WORK ON TURNINGS 1" DIAMETER OR LARGER:
SPRING LOADED CENTER POINT PROVIDES ACCURATE CENTERING. PREMIUM CARBON STEEL - 3" OAL. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979. ONEWAY LIVE CENTERS - 882-896. ONEWAY LIVE CENTER ADAPTERS - 137-714.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY BIG BITE CHUCK SPUR
|
| Big Bite Chuck Spur
|
THE 3-3/4" WIDE 2-PRONG ONEWAY "BIG BITE" CHUCK SPUR FITS ANY OF THE ONEWAY CHUCKS AND IS HELD IN PLACE WITH A CLOSING SET OF JAWS:
A 1" TANG ON THE BOTTOM OF THE SPUR CUTTER CENTERS THE SPUR IN THE CHUCK. TWO SPURS HAVE 60° BEVELS FOR A STRONG BITE INTO THE WORKPIECE. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY STRONGHOLD CHUCKS - 959-979. ONEWAY TALON CHUCKS - 959-627. ONEWAY CHUCKS - 959-585. ONEWAY LIVE CENTERS - 882-896.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY CHUCK W/3/4" 16 ADAPTER
|
| Oneway Chuck W/3/4" 16 Adapter
...plus other(s)
|
|
SET - ONEWAY CHUCK W/3/4"-16 ADAPTER 3/4"-16TPI ADAPTER, ONEWAY/TALON
|
|
|
|
Machinery Accessories - Lathes
|
STRONGHOLD CHUCK W/1"-8 ADAPTER
|
| Jumbo Jaws, Oneway/talon
...plus other(s)
|
|
SET - STRONGHOLD CHUCK W/1"-8 ADAPTER 1"-8TPI ADAPTER, STRONGHOLD
|
|
|
|
Machinery Accessories - Lathes
|
TALON CHUCK W/3/4"-16 ADAPTER
|
| Talon Chuck Package W/o Adaptor
...plus other(s)
|
|
SET - TALON CHUCK W/3/4"-16 ADAPTER TALON CHUCK PACKAGE W/O ADAPTOR
|
|
|
|
Machinery - Lathes
|
JET® 1236 LATHE
|
| Jet 1236 Lathe
...plus other(s)
|
THE JET® JWL-1236 WOOD LATHE HAS A CAST IRON BED WITH A HEADSTOCK THAT ROTATES 360° WITH STOPS AT 45°, 90° AND 180°. THE DRIVE SYSTEM HAS VARIABLE SPEEDS FROM 500 TO 3000 RPM WITH SIX PRESET DETENTS FOR COMMONLY USED SPEEDS. A SHORT OUTBOARD BED IS SUPPLIED WITH THE LATHE FOR BOWL TURNING. AN OFFSET TOOL REST ATTACHMENT HELPS BRING THE TOOL REST IN ALIGNMENT WITH THE ROTATED HEADSTOCK FOR CONVENIENT BOWL TURNING ACCESS:
INCLUDES 12" TOOL REST, 6" FACEPLATE, SPUR CENTER, LIVE CENTER, FACE SHIELD, KNOCKOUT ROD AND INSTRUCTION MANUAL. NET WEIGHT - 183 LBS; SHIPPING WEIGHT - 210 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 3/4HP, 115V, 11A, 1PH. SPEED RANGE - VARIABLE FROM 500 TO 3,000 RPM. SWING OVER BED - 12" (8-3/4" OVER BASE). DISTANCE BETWEEN CENTERS - 34-1/2". HEADSTOCK SHAFT: 1"-8TPI, #2MT, 3/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2-1/4" TRAVEL, #2MT, 3/8" BORE. OVERALL DIMENSIONS - 44"H X 60"W X 17"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY SCROLL CHUCK - 959-585. ONEWAY TALON CHUCK - 959-627. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE DUPLICATOR - 140-069. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Machinery - Lathes
|
JET® 1442 LATHES
|
| Jet 1442vs Benchtop Lathe
...plus other(s)
|
THE JET® JWL-1442 LATHES HAVE A REEVES MECHANICALLY VARIABLE SPEED DRIVE WITH EIGHT INDIVIDUAL SPEED SETTINGS. THE HEADSTOCK MOVES ALONG THE BED AND ROTATES 360° WITH POSITIVE STOPS AT 45° AND 90° FOR CONVENIENT BOWL TURNING APPLICATIONS. AN OPTIONAL 20" BED EXTENSION INCREASES THE BETWEEN CENTERS DISTANCE TO 62". ALSO AVAILABLE IS AN OPTIONAL 57" BED EXTENSION W/LEG BRINGING THE BETWEEN CENTERS DISTANCE TO 99". THE JET 1442VS MODEL IS A BENCHTOP LATHE AND THE JET 1442VSK MODEL HAS A CAST IRON LEG SET:
LATHE INCLUDES 12" TOOL REST, 6" FACE PLATE, SPUR CENTER, LIVE CENTER, KNOCKOUT ROD, WRENCH AND INSTRUCTION MANUAL. NET WEIGHT - 190 LBS; SHIPPING WEIGHT - 210 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 1HP, 115/230VAC, 7.4/3.7A, 1PH. SPEED SETTINGS (8) - FROM 450 TO 3000 RPM. SWING OVER BED - 14" (10" OVER BASE). DISTANCE BETWEEN CENTERS - 42". HEADSTOCK SHAFT: 1"-8TPI, #2MT. INDEXING - 36 POINT. TAILSTOCK QUILL: 4" TRAVEL, #2MT, 3/8" BORE. OVERALL DIMENSIONS - 58"H X 50"W X 24"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY SCROLL CHUCK - 959-585. ONEWAY TALON CHUCK - 959-627. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE DUPLICATOR - 140-069. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Shop Accessories
|
PATENTED PEG HOOKS WON'T FALL OFF WHEN REMOVING TOOLS
|
| 15 Piece Talon Toolholders
...plus other(s)
|
UNBREAKABLE NYLON TALON® PERFBOARD TOOLHOLDERS USE BOTTOM HOOKS AND EXPANDABLE TOP ANCHORS TO SECURELY FASTEN ONTO 1/4" PEG BOARD - JUST PUSH IN THE ENCLOSED SCREW WITH YOUR THUMB:
912-573 - 15-PIECE SET HAS THREE 1-5/8" STRAIGHT BARS, TWO 3-1/2" STRAIGHT BARS, THREE CURVED HOOKS, ONE 1-3/8" STRAIGHT BAR, TWO SCREWDRIVER HOLDERS (EACH HOLDS TWO), TWO PLIERS HOLDERS AND TWO 1/2" ELBOWS. 912-580 - 28-PIECE SET INCLUDES SIX 1-5/8" STRAIGHT BARS, TWO 3-1/2" STRAIGHT BARS, SIX CURVED HOOKS, TWO 1-3/8" STRAIGHT BARS, FOUR SCREWDRIVER HOLDERS (EACH HOLDS TWO), FOUR PLIERS HOLDERS AND FOUR 1/2" ELBOWS. 912-587 - 35-PIECE SET HAS SEVEN 1-5/8" STRAIGHT BARS, FOUR 3-1/2" STRAIGHT BARS, SEVEN CURVED HOOKS, TWO 1-3/8" STRAIGHT BARS, FOUR SCREWDRIVER HOLDERS (EACH HOLDS TWO), FOUR PLIERS HOLDERS AND SEVEN 1/2" ELBOWS. 912-594 - 48-PIECE SET COMES WITH NINE 1-5/8" STRAIGHT BARS, SIX 3-1/2" STRAIGHT BARS, NINE CURVED HOOKS, THREE 1-3/8" STRAIGHT BARS, SIX SCREWDRIVER HOLDERS (EACH HOLDS TWO), SIX PLIERS HOLDERS AND NINE 1/2" ELBOWS.
TOOLHOLDERS CAN BE MOUNTED IN ANY DIRECTION FOR ADDED VERSATILITY - RIGHT SIDE UP, UPSIDE DOWN OR SIDEWAYS. EASILY REMOVEABLE WITH A PHILLIPS HEAD SCREWDRIVER. USA.
|
|
|
|
Advanced Search Tools
Browse
will