|
|
|
Machinery Accessories - Lathes
|
ONEWAY CHUCK ADAPTERS
|
| 1-1/2"-8tpi Adapter, Stronghold
...plus other(s)
|
ONEWAY CHUCK ADAPTERS FIT ONEWAY CHUCKS TO VARIOUS LATHE SPINDLES. THEY ALSO ALLOW YOU TO SWITCH FROM ONE LATHE TO ANOTHER WITHOUT BUYING SEVERAL CHUCKS. FULLY MACHINED IN ONE SET UP, THE UNIQUE TAPER-LOCK DESIGN IS GUARANTEED TO RUN TRUE TO YOUR LATHE SPINDLE AND THE POSSIBILITY OF THE ADAPTOR LOOSENING OR SEPARATING FROM THE CHUCK BODY IN NORMAL USE OR WHEN REVERSING THE LATHE HAS BEEN SUCCESSFULLY ELIMINATED:
ONEWAY/TALON ADAPTERS FIT BOTH CHUCKS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCKS - 959-585. TALON CHUCKS - 959-627. STRONGHOLD CHUCKS - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY SPIGOT JAWS
|
| Smooth Spigot Jaws, Stronghold
...plus other(s)
|
MACHINED LONG AND DEEP, ONEWAY SPIGOT JAWS ARE DESIGNED FOR GRIPPING SMALL SPIGOTS WITH EXTRA HOLDING POWER:
STRONGHOLD SPIGOT JAWS HAVE SERRATIONS ON INSIDE AND OUTSIDE. ONEWAY/TALON SPIGOT JAWS HAVE SERRATIONS ON THE OUTSIDE ONLY. AVAILABLE IN PROFILED AND SMOOTH. NOT FOR USE WITH WOODWORM SCREW. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #3 JAWS
|
| #3 Smooth Jaws, Stronghold
...plus other(s)
|
DESIGNED FOR AVERAGE TO HEAVY CUTTING APPLICATIONS, ONEWAY #3 JAWS WILL ACCOMMODATE MEDIUM TO LARGE SIZED TURNINGS. PROFILED JAWS WILL HOLD ROUND AND SQUARE END STOCK WHILE SMOOTH JAWS ARE DESIGNED FOR ROUND STOCK ONLY:
PROFILED JAWS HAVE INTERNAL SERRATIONS FOR BETTER GRIPPING POWER. SMOOTH JAWS HAVE SMOOTH DOVETAILS TO HELP MINIMIZE SURFACE MARRING. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY FLAT JAWS
|
| Flat Jsws, Oneway
...plus other(s)
|
MAKE CUSTOM JAWS AND MOUNTS BY SCREWING BLOCKS OF WOOD ONTO THE ONEWAY FLAT JAWS AND TURNING THEM TO THE DESIRED SHAPE:
NO CAPACITIES RECOMMENDED. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY JUMBO JAWS
|
| Mini Jumbo Jaws, Oneway/talon
...plus other(s)
|
MADE OF MACHINED ALUMINUM, ONEWAY JUMBO JAWS HAVE STANDARD RUBBER BUTTONS TO HOLD TURNINGS FOR BOTTOM FINISHING. ALSO USED FOR HOLDING OUT-OF-ROUND OBJECTS OR MOUNTING SPECIALTY HOLDING JIGS:
MINI-JUMBO JAWS FIT LATHES WITH 10" SWINGS AND LARGER. STANDARD JUMBO JAWS FIT LATHES WITH 12" SWINGS AND LARGER. MEGA-JUMBO JAWS FIT LATHES WITH 14" SWINGS AND LARGER. WOODEN "FALSE-JAW" JIGS CAN BE DESIGNED AND USED ON JUMBO JAWS FOR PRECISION FINISHING AND OTHER APPLICATIONS. IMAGE SHOWS JUMBO JAWS ON TALON CHUCK. ACCESSORY BUTTON SETS FIT ALL JUMBO JAWS. CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY INTERNAL STEP JAWS
|
| Internal Step Jaws
|
DESIGNED SPECIFICALLY FOR SMALLER TURNINGS, ONEWAY INTERNAL STEP JAWS WILL EXPAND INTO TURNED RECESSES FOR LIGHT CUTTING ON SMALL TO MEDIUM SIZED TURNINGS:
JAWS HAVE THREE SEPARATE DOVETAIL SHAPED STEPS. THE INTERIOR JAWS HAVE SERRATIONS FOR HOLDING SMALL SPIGOTS. NOT AVAILABLE FOR STRONGHOLD CHUCK. NOT FOR USE WITH WOODWORM SCREW. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627.
|
|
|
|
Machinery Accessories - Lathes
|
MEGA JUMBO JAWS FOR STRONGHOLD CHUCKS
|
| Mega Jumbo Jaws, Stronghold
|
MACHINED ALUMINUM MEGA JUMBO JAWS HAVE STANDARD RUBBER BUTTONS OR YOU CAN MOUNT AND TURN WOODEN FALSE JAWS FOR PRECISION FINISHING OR OTHER LARGE APPLICATIONS:
ONLY FOR STRONGHOLD 16 AND LARGER SWINGS.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #2 JAWS
|
| #2 Profiled Jaws, Stronghold
...plus other(s)
|
DESIGNED FOR LIGHTER CUTTING APPLICATIONS, ONEWAY #2 JAWS WILL ACCOMMODATE SMALL TO MEDIUM SIZED TURNINGS. PROFILED JAWS WILL HOLD ROUND AND SQUARE END STOCK WHILE SMOOTH JAWS ARE DESIGNED FOR ROUND STOCK ONLY:
PROFILED JAWS HAVE INTERNAL SERRATIONS FOR BETTER GRIPPING POWER. SMOOTH JAWS HAVE SMOOTH DOVETAILS TO HELP MINIMIZE SURFACE MARRING. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #4 JAWS
|
| #4 Profiled Jaws, Stronghold
...plus other(s)
|
DESIGNED FOR LARGE EXPANSION AND CONTRACTION GRIPPING, ONEWAY #4 JAWS WILL ACCOMMODATE MEDIUM TO LARGE SIZED TURNINGS:
PROFILED JAWS ARE SERRATED FOR STRONGER HOLDING. SMOOTH JAWS HAVE SMOOTH INTERNAL AND EXTERNAL DOVETAILS AND ARE DESIGNED FOR NON-MARRING LIGHT CUTTING APPLICATIONS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #2 TOWER JAWS
|
| #2 Profiled Tower Jaws, Stronghold
...plus other(s)
|
WITH INCREASED DEPTH, ONEWAY PROFILED #2 TOWER JAWS PROVIDE THE GRIPPING STRENGTH NECESSARY FOR HOLDING HEAVIER MEDIUM SIZED BOWLS:
1-1/4" DEEP JAWS AND INTERNAL SERRATIONS ADD EXTRA GRIPPING POWER FOR HOLDING LARGER SPIGOTS AND SQUARE END STOCK. TENON HOLDING DOVETAILS ON BOTH THE INSIDE AND OUTSIDE END OF THE JAWS GIVE MORE CLEARANCE WHEN WORKING CLOSE TO THE CHUCK. CHUCK JAW TRAVEL TABLE BELOW SHOWS COMPRESSION AND EXPANSION DIMENSIONS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #3 TOWER JAWS
|
| #3 Profiled Tower Jaws, Stronghold
...plus other(s)
|
ONEWAY PREMIUM PROFILED #3 TOWER JAWS PROVIDE MAXIMUM HOLDING POWER FOR LARGER TURNINGS:
1-1/4" DEEP JAWS PROVIDE THE POWER AND STRENGTH NECESSARY FOR HOLDING LARGE SIZED BOWLS. THE INTERNAL SERRATIONS ADD EXTRA GRIPPING POWER FOR HOLDING LARGER SPIGOTS AND SQUARE ENDED SPINDLES. TENON HOLDING DOVETAILS ON BOTH THE INSIDE AND OUTSIDE END OF THE JAWS GIVE MORE CLEARANCE WHEN WORKING CLOSE TO THE CHUCK. CHUCK JAW TRAVEL TABLE BELOW SHOWS COMPRESSION AND EXPANSION DIMENSIONS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY CHUCK SPURS
|
| 1" Chuck Spur Center
...plus other(s)
|
NO NEED TO REMOVE YOUR CHUCK FROM THE LATHE. JUST INSERT THE ONEWAY CHUCK SPUR IS ANY SUITABLE CHUCK AND YOU'RE READY TO GO. THE 1/2" CHUCK SPUR IS DESIGNED FOR SMALL TURNINGS AND SPINDLES LESS THAN 1" DIAMETER WHILE THE 1" CHUCK SPUR WILL WORK ON TURNINGS 1" DIAMETER OR LARGER:
SPRING LOADED CENTER POINT PROVIDES ACCURATE CENTERING. PREMIUM CARBON STEEL - 3" OAL. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979. ONEWAY LIVE CENTERS - 882-896. ONEWAY LIVE CENTER ADAPTERS - 137-714.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY BIG BITE CHUCK SPUR
|
| Big Bite Chuck Spur
|
THE 3-3/4" WIDE 2-PRONG ONEWAY "BIG BITE" CHUCK SPUR FITS ANY OF THE ONEWAY CHUCKS AND IS HELD IN PLACE WITH A CLOSING SET OF JAWS:
A 1" TANG ON THE BOTTOM OF THE SPUR CUTTER CENTERS THE SPUR IN THE CHUCK. TWO SPURS HAVE 60° BEVELS FOR A STRONG BITE INTO THE WORKPIECE. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY STRONGHOLD CHUCKS - 959-979. ONEWAY TALON CHUCKS - 959-627. ONEWAY CHUCKS - 959-585. ONEWAY LIVE CENTERS - 882-896.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY LATHE CHUCKS GRIP TOUGH FOR EASIER VESSEL AND BOWL TURNING
|
| #2 Smooth Jaws, Stronghold
...plus other(s)
|
|
SET - STRONGHOLD CHUCK W/1"-8 ADAPTER 1"-8TPI ADAPTER, STRONGHOLD
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY STRONGHOLD CHUCKS
|
| Stronghold Chuck (body Only)
...plus other(s)
|
|
SET - STRONGHOLD CHUCK W/3/4"-16 ADAPTER 3/4"-16TPI ADAPTER, STRONGHOLD
|
|
|
|
Machinery - Lathes
|
JET® 1642 LATHES
|
| Jet 1642 Evs Lathe
...plus other(s)
|
THE JET® JWL-1642 LATHES USE A TWO-STEP, POLY V-BELT DRIVE TO PROVIDE TWO REVERSIBLE VARIABLE SPEED RANGES: 0-1,200 AND 0-3,200 RPM. THE MOVABLE HEADSTOCK CAN BE POSITIONED AT THE END OF THE BED AND USED FOR LARGER DIAMETER FREE-HANGING BOWL TURNING WHEN USING THE OPTIONAL OUTBOARD TURNING STAND. AN OPTIONAL FREE-HANGING 20" BED EXTENSION INCREASES THE BETWEEN CENTERS DISTANCE TO 62". ALSO AVAILABLE IS AN OPTIONAL 57" BED EXTENSION W/LEG BRINGING THE BETWEEN CENTERS DISTANCE TO 99". AVAILABLE IN 1-1/2HP AND 2HP MODELS:
LATHES INCLUDES 14" TOOL REST, 6" FACEPLATE, SPUR CENTER, LIVE CENTER, SAFETY SHIELD, TOOL BASKET, KNOCKOUT ROD AND INSTRUCTION MANUAL. ADDITIONAL FEATURES INCLUDE DIGITAL READOUT, TOOL STORAGE BASKET AND SHELF SUPPORT LIP CAST IN THE STAND TO ACCEPT 2X4 SHELVING. NET WEIGHT - 410 LBS; SHIPPING WEIGHT - 420 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
MODEL JWL-1642EVS PRO WOOD LATHE. MOTOR - 1-1/2HP, 230V, 4.6A, 3PH (REQUIRES 230V, 15A, 1PH CIRCUIT INPUT).
MODEL JWL-1642-2EVS PRO WOOD LATHE. MOTOR - 2HP, 230V, 4.6A, 3PH (REQUIRES 230V, 20A, 1PH CIRCUIT INPUT).
SPECIFICATIONS:
SPEED RANGES (2): 0-1,200 AND 0-3,200 RPM. SWING OVER BED - 16" (12" OVER BASE). DISTANCE BETWEEN CENTERS - 42". HEADSTOCK SHAFT: 1-1/4"-8TPI, #2MT. INDEXING - 36 POINT. TAILSTOCK QUILL: 4" TRAVEL, #2MT, 3/8" BORE. SPINDLE HEIGHT - 44-1/2". OVERALL DIMENSIONS - 50"H X 63-1/2"W X 20"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY STRONGHOLD CHUCK - 959-979. ONEWAY TALON CHUCK - 959-627. ONEWAY SCROLL CHUCK - 959-585. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE DUPLICATOR - 140-069. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Advanced Search Tools
Browse
will