|
|
|
Bits Router/door Construction/door Lip & Finger Pull
|
FREUD® DOOR EDGE TREATMENT ROUTER BITS
|
| Ogee Detail Door Edge Bit W/eased Edge
...plus other(s)
|
FREUD® DOOR EDGE TREATMENT ROUTER BITS CAN BE USED TOGETHER OR INDIVIDUALLY TO CUSTOMIZE YOUR PROJECTS:
99-063 "NO LIP" BIT ROUTS AN INVERTED OGEE PROFILE USING ITS BALL BEARING GUIDE TO FOLLOW THE EDGE. PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. 99-064, 129-836 "FINGER PULL" BITS ADD A RAISED EDGE ALONG DOORS. NOTE: INTENDED FOR TABLE MOUNTED USE. TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/raised Panel & Backcutters
|
FREUD® QUADRA-CUT™ RAISED PANEL ROUTER BITS WITH BACK CUTTERS
|
| Mini Raised Panel Ogee W/backcutter
...plus other(s)
|
MAKE PANELS FROM 3/4" STOCK THAT ARE FLUSH WITH THE REAR OR BACK OF THE DOOR USING CARBIDE TIPPED FREUD® QUADRA-CUT™ RAISED PANEL ROUTER BITS WITH BACK CUTTERS:
OVERALL DIAMETER "D", CARBIDE HEIGHT "H", MINOR HEIGHT "H", LARGE RADIUS "R", SMALL RADIUS "R", SHANK DIA."D", OVERALL LENGTH "OAL". INCLUDED SHIMS ALLOW 7/32" TO 1/4" TONGUE THICKNESS ADJUSTMENT. ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/door Construction/raised Panel & Backcutters
|
FREUD® QUADRA-CUT™ RAISED PANEL ROUTER BITS
|
| Raised Panel Ogee/cove Edge 2-3/4 X 5/8
...plus other(s)
|
FREUD® CARBIDE TIPPED QUADRA-CUT™ RAISED PANEL ROUTER BITS FEATURE A REVOLUTIONARY DESIGN THAT COMBINES TWO SMALL WINGS THAT CUT DOWNWARD TO SHEAR THE TOP EDGE FOR A SPLINTER-FREE SURFACE, AND TWO LARGE WINGS THAT SHEAR UPWARD FOR A SMOOTH FINISH WHICH REQUIRES RARE TOUCH-UP SANDING:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/door Construction/raised Panel & Backcutters
|
WOODTEK OGEE WITH FILLET RAISED PANEL ROUTER BIT
|
| Ogee With Fillet Raised Panel Bit
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED OGEE WITH FILLET RAISED PANEL ROUTER BITS CREATE SMOOTH, CLASSIC PROFILES - USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/raised Panel & Backcutters
|
WOODTEK OGEE VERTICAL RAISED PANEL ROUTER BIT
|
| Ogee-vertical Raised Panel Bit
...plus other(s)
|
THE SINGLE PIECE DESIGN OF THE WOODTEK® CARBIDE-TIPPED OGEE VERTICAL RAISED PANEL ROUTER BIT ALLOWS IT TO RUN WITH A LOWER RIM SPEED THAN CONVENTIONAL, HORIZONTAL PANEL RAISING BITS AND PUTS LESS LOAD ON YOUR ROUTER - USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANK. IMPORTED.
|
|
|
|
Bits Router/door Construction/raised Panel & Backcutters
|
WOODTEK MINEATURE VERTICAL RAISED PANEL ROUTER BIT
|
| Vertical Panel Bit, Ogee W/cove Edge
...plus other(s)
|
USED ON A ROUTER TABLE WITH A FENCE, WOODTEK® CARBIDE-TIPPED MINIATURE VERTICAL PANEL RAISING ROUTER BITS REQUIRE LESS POWER THAN HORIZONTAL STYLES WHILE GIVING A SIMILAR CUT - USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" SHANKS. IMPORTED.
|
|
|
|
Bits Router/door Construction/raised Panel & Backcutters
|
WOODTEK 2 PIECE FRAME AND PANEL ROUTER BIT SET
|
| 2pc Raised Panel Cutter
...plus other(s)
|
USING THE REVERSIBLE WOODTEK® CARBIDE-TIPPED TWO-PIECE COVE RAISED PANEL DOOR SET YOU CAN MAKE PERFECT MATCHING OGEE STILES AND RAILS FOR CUSTOM DOORS. THE TWO-PIECE COVE RAISED PANEL SET WITH VERTICAL PANEL BIT IS AVAILABLE FOR HORIZONTAL OR VERTICAL USE AS BEST SUITS YOUR OPERATION - USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
WOODTEK OGEE WITH FILLET DOUBLE REVERSIBLE RAIL & STILE CABINET DOOR ROUTER BIT
|
| Ogee With Fillet Dbl Reversible
|
THE WOODTEK® CARBIDE-TIPPED OGEE WITH FILLET, DOUBLE REVERSIBLE STILE AND RAIL ROUTER BIT PRODUCES PRECISELY MATCHED CUTS FOR A SMOOTH, TROUBLE-FREE FIT. THERE IS NO NEED TO DISMANTLE AND REVERSE THE COMPONENTS - SIMPLY RAISE OR LOWER THE BIT:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
WOODTEK OGEE DOUBLE REVERSIBLE RAIL AND STILE ROUTER BIT
|
| Ogee Dbl Reversible
|
THE WOODTEK® CARBIDE-TIPPED OGEE DOUBLE REVERSIBLE STILE AND RAIL ROUTER BIT PRODUCES PRECISELY MATCHED CUTS FOR A SMOOTH, TROUBLE-FREE FIT. THERE IS NO NEED TO DISMANTLE AND REVERSE THE COMPONENTS - SIMPLY RAISE OR LOWER THE BIT:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
WOODTEK OGEE DETAIL REVERSE STILE & RAIL BIT
|
| Rev Rail & Stile Bit, Ogee Detail
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED OGEE REVERSIBLE STILE AND RAIL ROUTER BITS PRODUCE PERFECTLY MATCHING JOINTS FOR STILE AND RAIL CONSTRUCTION AND GENERAL EDGE JOINING - USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
WOODTEK® OGEE WITH FILLET REVERSIBLE STILE AND RAIL ROUTER BITS
|
| Rev Rail & Stile Bit, Ogee With Fillet
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED OGEE WITH FILLET REVERSIBLE STILE AND RAIL ROUTER BITS PRODUCE PRECISELY MATCHED CUTS FOR SMOOTH, TROUBLE FREE FITS - USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
WOODTEK OGEE STILE & RAIL CABINET DOOR ROUTER BIT SET
|
| Rail & Stile Set, Ogee Detail
|
THE SINGLE PIECE DESIGN OF THIS WOODTEK® CARBIDE-TIPPED OGEE STILE AND RAIL ROUTER BIT SET MAKES SET-UP MORE ACCURATE, FASTER AND EASIER - USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® ADJUSTABLE 3 PIECE DOOR SETS CAN BE USED TO BUILD DOORS UP TO 1-1/4" THICK AND WILL ACCOMMODATE MORTISE & TENON JOINERY
|
| 3-pce Door Set With Ogee Panel Bit
...plus other(s)
|
ADJUSTABLE STILE & RAIL BITS ACCOMMODATE STOCK FROM 5/8" TO 1-1/4". COPE CUTTER WILL PASS UNDER TENON AND ALLOW FOR EXTENDED TENON. ADJUSTABLE GROOVE CUTTER ACCOMMODATED PANEL EDGES FROM 7/32" TO 3/8". AVAILABLE IN 4 RAISED PANEL STYLES: BEVEL, COVE, OGEE W/COVE EDGE, & OGEE W/BEVEL EDGE. 2ND PROFILE CUTTER CAN BE ADDED FOR DOORS WITH 2 DECORATIVE SIDES. RABBET CUTTER AVAILABLE FOR GLASS PANEL DOOR JOINERY. INCLUDES STILE AND RAIL BITS ALONG WITH A QUADRA-CUT™ PANEL RAISER IN A NESTED CASE. THICK CARBIDE TIPS FOR LONG LIFE. EACH SET INCLUDES RAISED PANEL DOORS MADE SIMPLE" CD. LIFETIME MANUFACTURERS WARRANTY. ITALY.
97-150 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" DIA. RAISED PANEL BIT 97-152 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" DIA. RAISED PANEL BIT 97-154 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH OGEE AND COVE EDGE 3-1/2" DIA. RAISED PANEL BIT 97-156 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" DIA. RAISED PANEL BIT AND COVE BACK CUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-158 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" DIA. RAISED PANEL BIT AND COVE BACK CUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-250 OGEE MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" RAISED PANEL BIT 97-252 OGEE MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" RAISED PANEL BIT 97-254 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE AND COVE EDGE 3-1/2" RAISED PANEL BIT 97-258 OGEE MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" RAISED PANEL BIT AND COVE BACKCUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-260 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE 3-1/2" RAISED PANEL BIT AND COVE BACKCUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-276 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE AND BEVEL EDGE 2-3/4" RAISED PANEL BIT 99-860 QUARTER-ROUND CUTTER USED TO ADD RAIL & STILE MOLDING DETAIL TO OPPOSITE SIDE OF DOOR. A GOOD SELECTION FOR DOORS WITH THICK FRAMES 99-861 OGEE CUTTER USED TO ADD RAIL & STILE MOLDING DETAIL TO OPPOSITE SIDE OF DOOR. A GOOD SELECTION FOR DOORS WITH THICK FRAMES 54-760 RABBET CUTTER USED TO CREATE RECESS FOR GLAZED DOORS. A GOOD SELECTION FOR UPPER CABINET DOORS
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® THREE-PIECE SETS DOOR MAKING SETS HAVE RAISED PANEL BITS WITH BACKCUTTERS AND ARE IDEAL FOR THICK CABINET
|
| 3-pcs Door Set, Bevel Panel W/backcutter
...plus other(s)
|
FOUR MOLDING DETAILS AVAILABLE: 1) QUARTER-ROUND RAIL & STILE W/BEVEL RAISED PANEL, 2) QUARTER-ROUND RAIL & STILE W/COVE RAIDED PANEL, 3) OGEE RAIL & STILE W/BEVEL RAISED PANEL, AND 4) OGEE RAIL & STILE W/OGEE RAISED PANEL. ALL BACK RELIEF CUTTERS HAVE COVE DETAIL. 3" OAL BITS - 1/2" SHANKS. ROUTER BIT ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. ITALY.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® RAIL & STILE PROFILE ROUTER BITS
|
| Rail & Stile Bit, Ogee W/fillet
...plus other(s)
|
CREATE RAIL AND STILE DOOR MATCHED REVERSE PROFILES WITH CARBIDE TIPPED FREUD® RAIL & STILE PROFILE ROUTER BITS:
#99-060 AND #99-061 COPE AND STICK THE RAIL AND STILES AND CAN ALSO BE USED ALONE TO FORM A MATCHING EDGE PROFILE. #99-062 CUTS THE PANEL SLOT AND THE BACK OF THE TONGUE ON THE COPED PIECE. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® MINI MATCHED RAIL & STILE ROUTER BIT SET
|
| Mini Rail & Stile Set, Ogee Detail
|
CARBIDE TIPPED FREUD® MINI MATCHED RAIL & STILE ROUTER BIT SET PRODUCES PERFECT FITTING RAIL AND STILE DOORS FROM 3/4" STOCK:
EACH BIT INCLUDES SHIMS FOR FINE TUNING A JOINT FOR A CONTINUED PERFECT FIT. TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. USE ON TABLE MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® ONE PIECE RAIL & STILE ROUTER BITS
|
| Rail & Stile Bit, Ogee W/fillet Detail
...plus other(s)
|
USE FREUD® ONE PIECE RAIL & STILE BITS TO CUT FRAME MEMBERS FACE DOWN ON A 1/2" ROUTER AND ROUTER TABLE SO VARIATIONS IN STOCK THICKNESS ARE NOT A PROBLEM:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® ADJUSTABLE RAIL & STILE SETS PERMIT BOTH COPE & STICK AND TRADITIONAL MORTISE & TENON JOINERY
|
| Adjustable Rail & Stile Set, Ogee
...plus other(s)
|
|
ADJUSTABLE STILE & RAIL BITS ACCOMMODATE STOCK FROM 5/8" TO 1-1/4". COPE CUTTER HAS FLUSH TOP TO PASS UNDER TENON AND ALLOW FOR EXTENDED TENON. ADJUSTABLE GROOVE CUTTER ACCOMMODATED PANEL EDGES FROM 7/32" TO 3/8". AVAILABLE IN 4 MOLDING DETAILS: QUARTER-ROUND, OGEE, BEAD, AND BEVEL. 2ND PROFILE CUTTER CAN BE ADDED FOR DOORS WITH 2 DECORATIVE SIDES. RABBET CUTTER AVAILABLE FOR GLASS PANEL DOOR JOINERY. EACH BIT INCLUDES SHIMS FOR FINE TUNING A JOINT FOR A CONTINUED PERFECT FIT. TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. USE ON TABLE MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/door Construction/stile & Rail - Glass Door - Window
|
GLASS CABINET DOORS WILL LOOK AS GOOD INSIDE AS OUT WITH THE FREUD® GLASS DOOR ROUTER BIT SET
|
| Ogee Recoverable Bead Glass Dr Set
...plus other(s)
|
THE FREUD® CARBIDE TIPPED RECOVERABLE GLASS DOOR BIT SET CUTS A CONVENTIONAL STILE/RAIL; SAW OFF THE BEAD TO RETAIN THE GLASS. WORKS WITH 3/4" STOCK AND 1/8" GLASS:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. ITALY.
|
|
|
|
Bits Router/door Construction/stile & Rail - Glass Door - Window
|
FREUD® GLASS PANEL CABINET DOOR BIT SET ARE FAST AND ACCURATE
|
| Glass Panel Cabinet Door Set Ogee Detail
...plus other(s)
|
THE FREUD® GLASS PANEL CABINET DOOR BIT SET CREATES TOP QUALITY STRONG, TIGHT-FITTING GLASS PANEL DOOR JOINTS WITH EASE AND ACCURACY. WORKS WITH 3/4" AND 1" STOCK AND 1/8" GLASS:
UNIQUE LOCK IN STILE AND RAIL JOINT INCREASES STRENGTH WITH ITS LARGER GLUING SURFACE. TIME SAVING SET-UP IMPROVES ACCURACY AND INCREASES PROFITABILITY FOR THE PROFESSIONAL. PANEL MOLDING COMES IN 25 FOOT ROLLS. USE ON TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. ITALY.
|
|
|
|
Bits Router/door Construction/stile & Rail - Passage & Entry
|
FREUD® ENTRY & INTERIOR DOOR ROUTER BIT SYSTEM
|
| Ogee Entry & Interior Door Set
...plus other(s)
|
THE FREUD® ENTRY & INTERIOR DOOR ROUTER BIT SYSTEM LETS YOU MILL PERFECT 1-3/4" RAIL AND STILE JOINTS FOR EXTERIOR DOORS; TO MILL 1-3/8" INTERIOR DOOR JOINTS, SIMPLY REMOVE THE SPACERS FROM EACH BIT:
THE THICK STOCK SET HANDLES ENTRY DOORS UP TO 2-1/4" THICK - IDEAL FOR OVERSIZED CUSTOM ENTRY DOORS! KICKBACK REDUCING DESIGN - SHIMS INCLUDED FOR FINE TUNING A JOINT FOR A CONTINUED PERFECT FIT. TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/edge Forming/miniature Edge Forming
|
MINIATURE ROUTER BIT SET GREAT FOR SMALL MOLDINGS AND DECORATIVE EDGES
|
| Bead Ogee Bit
...plus other(s)
|
|
|
|
Bits Router/edge Forming/ogee
|
WOODTEK ROMAN OGEE ROPUTER BIT
|
| 5/32 Rad Roman Ogee
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED ROMAN OGEE ROUTER BITS ARE PERFECT FOR MOLDINGS, TABLE EDGES AND PANEL EDGES - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/edge Forming/ogee
|
BOSCH ROMAN OGEE BITS
|
| 85270m 5/32 Roman Ogee 1/4 Ctbb
...plus other(s)
|
CARBIDE TIPPED BOSCH ROMAN OGEE ROUTER BITS ADD A DISTINCTIVE LOOK TO MOLDINGS, TABLE EDGES AND PANEL EDGES:
PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/edge Forming/ogee
|
P-C 342 RECON SANDER + OGEE ROUTER BIT
|
| P-c 342 Recon Sander + Ogee Router Bit
...plus other(s)
|
PORTER-CABLE® QUARTER-SHEET AND RANDOM ORBIT SANDERS NOW FEATURE A TOP CAP DESIGN THAT ALLOWS SERVICING AND CLEANING WITHOUT DISASSEMBLY PLUS IMPROVED ERGONOMICS FOR MORE COMFORTABLE TOP AND BODY GRIPPING:
120VAC QUARTER-SHEET SANDER HAS 2.4A MOTOR; RANDOM ORBIT SANDERS HAVE 3A. DUAL DUST PORTS ACCEPT 1" AND 1-1/2" VACUUM HOSES WHILE REMOVABLE HARD DUST CANISTER EXCEEDS DURABILITY OF CLOTH DUST BAGS. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Bits Router/edge Forming/ogee
|
PORTER CABLE® 3/16" OGEE WITH FILLET ROUTER BIT
|
| 3/16" Ogee W/fillet 43175pc
|
|
FORMS A CLASSIC DESIGN ON EDGES. ADJUST HEIGHT TO CUT THE PROFILE WITH OR WITHOUT A FILLET. MONSTER-CARBIDE™ TIPS RESULT IN BETTER HEAT AND FORCE DISTRIBUTION. TO GENERATE LESS FRICTION AND RUN COOLER. THIS PROVIDES SMOOTHER CUTS AND ALLOWS A FASTER FEED RATE. CARBIDE THICKNESS ALSO ALLOWS BIT TO BE RESHARPENED MORE TIMES THAN STANDARD CARBIDE POZI-STOP™ SHANK AUTOMATICALLY LOCATES BIT AT CORRECT HEIGHT IN COLLET - NO TEST CUTS NEEDED. SWITCHING BETWEEN BITS DURING A PROJECT IS FAST AND EASY SINCE BITS WILL ALWAYS BE AT EXACTLY THE SAME HEIGHT. THIS CREATES A STRONGER, LONGER-LASTING BIT WITH LESS VIBRATION PRODUCING SMOOTHER CUTS. MADE IN USA.
|
|
|
|
Bits Router/edge Forming/ogee
|
FREUD® ROMAN OGEE ROUTER BITS
|
| 1-1/16" Roman Ogee Router Bit
...plus other(s)
|
CARBIDE TIPPED FREUD® ROMAN OGEE ROUTER BITS ADD A DISTINCTIVE LOOK TO FURNITURE AND MILLWORK:
PILOT BEARINGS ENSURE GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" AND 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/edge Forming/ogee
|
FREUD® TOP-BEARING FILLET OGEE GROOVE ROUTER BIT IDEAL FOR DECORATIVE EDGES
|
| 3/4 Ogee Groove-top Brg-1/4"shk
|
THE FREUD® #39-522 TOP-BEARING FILLET OGEE GROVE ROUTER BIT PRODUCES A SYMMETRICAL OGEE PROFILE ENDING IN A FILLET...USE FOR TEMPLATE WORK AND ELABORATE GROOVES:
PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/edge Forming/ogee
|
WOODTEK OGEE ROUTER BIT
|
| 64021 3/16"rad.ogee Bit W/brng
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED OGEE ROUTER BITS WITH GUIDE BEARINGS ADD DECORATIVE EDGES ON PLAQUES, FURNITURE AND CHESTS - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/edge Forming/ogee
|
WOODTEK OGEE WITH FILLET ROUTER BIT
|
| 64741 7/16"ogee Bit W/fillet
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED OGEE ROUTER BITS WITH FILLETS AND GUIDE BEARINGS ADD DECORATIVE EDGES ON PLAQUES, FURNITURE AND CHESTS - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Advanced Search Tools
Browse
will
