|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
JASPER ROUTER BASE PLATES ALSO FUNCTION AS GUIDE BUSHING ADAPTERS
|
| Router Base Plate W/centering Pin
...plus other(s)
|
MADE OF RIGID 1/4" ACRYLIC, THE JASPER 575 BASE PLATE INCLUDES A CENTERING PIN THAT ALIGNS TEMPLATE GUIDES WITH YOUR ROUTER'S COLLET SO YOUR BITS WILL BE DEAD CENTER TOO.
A MUST WHEN USING DOVETAIL JIGS AND FOR PRECISE TEMPLATE FOLLOWING. THE JASPER 500 IS 3/8" THICK AND EXCLUDES CENTERING PIN. THE JASPER 535 OFFSET BASE IS TEARDROP SHAPED AND 7"W X 12"L X 3/8" THICK TO STABILIZE YOUR ROUTER FOR EXCELLENT CONTROL. PRE-DRILLED TO FIT SEARS, RYOBI, MAKITA 3612, 3621, MILWAUKEE 5615/5616/5619 SERIES, HITACHI M8V/TR12/M12V/KM12VC, BOSCH 1617/1618 SERIES, DEWALT 621/625/616/618 SERIES, FEIN FT-1800, ELU 177, PORTER CABLE 690 SERIES, 7529, 8529 AND FREUD FT2000E. MADE IN USA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
WOODRAT® PLUNGEBAR™
|
| Woodrat Plungebar Type A
...plus other(s)
|
FOR USE IN ROUTER TABLE, FREEHAND, AND IN JIGS AND ROUTER LATHES. NO MORE INCONVENIENCE AND BACK PAIN TRYING TO LIFT YOUR ROUTER AGAINST THE FORCE OF ITS SPRINGS. IDEAL FOR WOODWORKERS WITH GRIPPING DIFFICULTIES. PLUNGEBAR™ A FITS DEWALT 625/624/629, ELU MOF177 PLUNGEBAR™ C FITS BOSCH 1615/1619EVS, FREUD 2000, HITACHI M12,RYOBI 601/600 PLUNGEBAR™ D FITS BOSCH 1613EVS/1614EVS, DEWALT 621, ELU 97 PLUNGEBAR™ E FITS PORTER-CABLE 7529/97529/8529 PLUNGEBAR™ F FITS BOSCH 1617EVS/ DEWALT 6182 PLUNGE BASE, FEIN RT1800 MAKITA 3612
EASY INSTALLATION
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
MICRO FENCE EDGE-GUIDE SYSTEM TURNS YOUR HAND HELD ROUTER INTO A PRECISION MILLING MACHINE
|
| Mfc Special For Makita Rd & Rf
...plus other(s)
|
BASED UPON MACHINE TOOL TRADE PRECISION, THE PATENTED MICRO FENCE EDGE-GUIDE SYSTEM PROVIDES MICROMETER ADJUSTED CAPABILITIES THAT MAXIMIZE STRAIGHT LINE, CIRCULAR OR ELLIPTICAL WOODWORKING ACCURACY AND EFFICIENCY:
SYSTEM ADDRESSES ALL EDGE REFERENCED OPERATIONS WITH 0.001" OR 0.1MM READOUTS. ONE TURN EQUALS 0.050" - IF A PIECE OF PLYWOOD IS 0.354," INSTEAD OF 0.375", IT'S A SIMPLE JOB TO MAKE IT FIT CORRECTLY. LOCKING EDGE GUIDE ENSURES CUTS ARE ACCURATE AND EASIER TO MAKE. WORKS WITH MORE THAN 60 MAKES AND MODELS OF ROUTERS, INCLUDING LAMINATE TRIMMERS.
MICRO FENCE COMPLETE (MFC) INCLUDES THE BASIC MICROMETER EDGE-GUIDE UNIT, 7" & 12" STAINLESS STEEL GUIDE SHAFTS (INTERCHANGEABLE), SHALLOW AND DEEP PROFILE WOOD SUBFENCES, HALF ROUND INSERTS FOR CURVED AND CIRCULAR WORK, EXTENSION SPACERS FOR FENCE PLACEMENT AT OR BEYOND CENTER COLLET, DECIMAL EQUIVALENCY CHART, THE CORRECT MOUNTING BAR, PINS AND SCREWS TO FIT YOUR ROUTER AND A 12 PAGE INSTRUCTION MANUAL. FITS THE FOLLOWING ROUTERS:
111-227 - "A STYLE" PORTER-CABLE® 100, 150, 350, 630, 670, 690, 693, 9290 (CORDLESS). ALSO FITS PORTER-CABLE® 309, 310, 3901, 7310; BOSCH 1608; DEWALT® 670, 673; MAKITA® 3700B LAMINATE TRIMMERS. 111-230 - "B STYLE" BOSCH 1611, 1613, 1615, B1450, B1550; DEWALT® 625; ELU 3337, 3338, 3339. 111-233 - "C STYLE" MAKITA® 3600, 3612B, 3612BR, 3612C; HITACHI® TR12, M12V; RYOBI® RE600; FREUD® FT2000E; CRAFTSMAN® 27510, 27511. 111-236 - "D STYLE" DEWALT® 610; BLACK & DECKER® 2720, 7614, ELU 2721 111-239 - "E STYLE" BOSCH 1614, MAKITA® 3620, 3621; DEWALT® 614, 615, 621; ELU 3303, 3304; HITACHI® M8V; BLACK & DECKER® BD6200 QUANTUM. 111-242 - PORTER-CABLE® 691. 111-248 - MAKITA® RF/RD1100 AND RF/RD1101. 111-251 - BOSCH 1617 AND 1618.
MICRO FENCE TOTAL INCLUDES THE MICRO FENCE COMPLETE PACKAGE PLUS THE CIRCLE JIG ATTACHMENT (111-254 - CAN BE ORDERED SEPARATELY). CAPABLE OF 6"-48" DIAMETERS, THE ATTACHMENT EXPANDS THE VERSATILITY OF THE MFC FOR MAKING CIRCLES, ARCS AND PARALLEL DADOES. COMES WITH ALUMINUM STRAIGHT LINE FENCE FOR PARALLEL DADOES AND INSTRUCTION BOOKLET:
960-021 - "A STYLE" PORTER-CABLE® 100, 150, 350, 630, 670, 690, 693, 9290 (CORDLESS). ALSO FITS PORTER-CABLE® 309, 310, 3901, 7310; BOSCH 1608; DEWALT® 670, 673; MAKITA® 3700B LAMINATE TRIMMERS. 960-028 - "B STYLE" BOSCH 1611, 1613, 1615, B1450, B1550; DEWALT® 625; ELU 3337, 3338, 3339. 960-035 - "C STYLE" MAKITA® 3600, 3612B, 3612BR, 3612C; HITACHI® TR12, M12V; RYOBI® RE600; FREUD® FT2000E; CRAFTSMAN® 27510, 27511. 960-042 - "D STYLE" DEWALT® 610; BLACK & DECKER® 2720, 7614, ELU 2721 960-049 - "E STYLE" BOSCH 1614, MAKITA® 3620, 3621; DEWALT® 614, 615, 621; ELU 3303, 3304; HITACHI® M8V; BLACK & DECKER® BD6200 QUANTUM. 960-056 - PORTER-CABLE® 691. 960-063 - MAKITA® RF/RD1100 AND RF/RD1101. 960-070 - BOSCH 1617 AND 1618.
117-722 - CENTER BAR AND OUTBOARD LEVELER KIT ATTACHES TO EDGE GUIDE FOR CIRCLES 6" AND UNDER.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
ADD FEATURES AND SPEED TO PLUNGE ROUTERS WITH ROUTER RAIZER™
|
| Router Raizer
...plus other(s)
|
PERMANENTLY REPLACE A PLUNGE ROUTER'S HEIGHT ROD WITH PATENTED ROUTER RAIZER™ FOR TREMENDOUS IMPROVEMENTS IN DEPTH ADJUSTMENT DURING TABLE MOUNTED OR HAND HELD OPERATIONS. 1/16" ADJUSTMENTS ARE EASILY MADE FROM ABOVE OR BELOW THE TABLE WITHOUT GIVING UP THE ROUTER'S ORIGINAL TURRET SYSTEM OR PLUNGE CAPABILITIES. COMPACT DESIGN; WEIGHS 8 OZ. MANUFACTURED TO STRICT TOLERANCES; PARTS PLATED WITH ELECTROLESS NICKEL. INCLUDES ADJUSTING ROD, SPEED WRENCH, DUST COVER ASSEMBLY, INSTRUCTIONS AND DRILLING TEMPLATES (ROUTER AND BASE PLATE NOT INCLUDED). USA:
109-919 - ROUTER RAIZER™ 100 FITS: CRAFTSMAN 27505, 27506, 27510, 27511; DEWALT DW621, DW 625; ELU 3337, 3338, 3339; FREUD FT 2000; HITACHI TR12, M12V; MAKITA 3612-B, 3612-C, 3612-BR; PORTER-CABLE 693, 6931 BASE, 7529, 7538, 7539 AND RYOBI RE600.
114-671 - ROUTER RAIZER™ 200 FITS: BOSCH 1619EVS 3-1/4HP; BOSCH 1166 PLUNGE BASE; FEIN RT1800 3-1/4HP AND MAKITA RF1101 PLUNGE BASE.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
CUT PRECISE CIRCLES, MORTISES AND ARCS USING YOUR PLUNGE ROUTER
|
| Jasper Circle Jig
...plus other(s)
|
PATENTED JASPER CIRCLE GUIDES ARE EXTREMELY ACCURATE, EASY TO USE AND VERY DURABLE - PRE-DRILLED AND COUNTERSUNK, THEY ACCEPT PLUNGE ROUTERS MADE BY PORTER-CABLE®, HITACHI®, BLACK & DECKER®, BOSCH, DEWALT®, MAKITA®, FREUD®, RYOBI®, SKIL® AND SEARS®:
CNC-MACHINED, 1/4" THICK CAST ACRYLIC GUIDES HAVE SILK-SCREENED MARKINGS FOR EASY READING. 106-730 - MODEL 200 PERFECT CIRCLE GUIDE (APPROXIMATELY 13"L X 6-1/2"W) IS PRIMARILY DESIGNED FOR MAKING SPEAKER CUTOUTS AND FLUSH-MOUNTING SPEAKER DRIVERS. USE TO CUT 256 CIRCLES FROM 2-1/4" TO 18-3/16" DIA. IN 1/16" INCREMENTS - SCALE CALIBRATED FOR 1/4" ROUTER BIT. 117-785 - MODEL 270 PERFECT CIRCLE GUIDE (APPROXIMATELY 13"L X 6-1/2"W) CAN BE USED TO MAKE 180 CIRCLES FROM 7" TO 18-3/16" DIA. IN 1/16" INCREMENTS - CALIBRATED FOR 1/4" ROUTER BIT. 106-733 - MODEL 300 CIRCLE JIG (APPROXIMATELY 31"L X 6-3/4"W, TAPERING TO 2-1/4"W) IS PRIMARILY FOR MAKING TABLETOPS AND PROVIDES 184 CIRCLE CUTS FROM 7" TO 52-3/4" DIAMETER IN 1/4" INCREMENTS - CALIBRATED FOR 1/2" ROUTER BIT. 106-736 - MODEL 400 PERFECT CIRCLE GUIDE (APPROXIMATELY 7-1/2" DIA.) CAN BE USED TO MAKE 105 CIRCLES FROM 1" TO 7-1/2" DIA. IN 1/16" INCREMENTS - CALIBRATED FOR 1/4" ROUTER BIT. 117-791 - MODEL 500 BASE PLATE ADAPTER (6-5/8" DIA X 3/8" THICK CAST ACRYLIC) IS USED TO CONVERT YOUR EXISTING ROUTER BASE TO ACCEPT PORTER-CABLE®-STYLE GUIDE BUSHINGS AND ACCESSORIES - ADAPTER FITS SEARS® 315-175-040, 315-175-050, 315-175-070, 315-175-060, 315-275-000, 315-275-100 AND 315-275-110, ALL RYOBI®, MAKITA®, HITACHI® M8V, TR12 AND M12V, BOSCH 1615, DEWALT® 621/625, FEIN® FT-1800, ELU 177 AND FREUD® FT2000E. USA.
|
|
|
|
Portable Power Tool Accessories - Not Listed Elsewhere
|
KP0810 3-1/4" PLANER IS POWERFUL YET LIGHTWEIGHT
|
| Kp0810 3-1/4" Planer
...plus other(s)
|
|
WEIGHING ONLY 7.2 LBS, THE KP0810 IS POWERED BY A 7.2 AMP MOTOR. 2 BLADE CUTTER HEAD FOR FAST STOCK REMOVAL AT 16,000 RPM. CHIP EJECTION CAN BE DIRECTED TO EITHER SIDE OF HANDLE. INCLUDES BLADE GAUGE ASSEMBLY, SOCKET WRENCH, GUIDE RULE, DEPTH GUIDE AND BLADE SET. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Not Listed Elsewhere
|
LAMBS WOOL H&L BUFFING PADS
|
| 3" H&l Lambs Wool Buffing Pad
...plus other(s)
|
PUT A HIGH POLISH ON WAXED FINISHES WITH THESE PREMIUM H&L LAMBS WOOL BUFFING PADS. DESIGNED TO WORK WITH H&L DISC HOLDERS AND RANDOM ORBIT SANDER/POLISHERS:
3", 3-1/2" AND 5" PADS FIT STANDARD H&L DISK HOLDERS. 3-1/2" PAD FITS METABO SXE400 ORBITAL SANDER. 5" AND 6" PADS FIT PORTER CABLE, MAKITA, DEWALT AND OTHER H&L RANDOM ORBIT SANDER/POLISHERS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
3" AND 5" H&L DISK HOLDERS - 133-467. 5" AND 6" H&L INTERFACE PADS - 930-323.
|
|
|
|
Portable Power Tool Accessories - Drills
|
ONE HANDED BIT CHANGE SYSTEMS SAVE MUCH MORE TIME THAN KEYLESS CHUCKS - 75% MORE THAN KEYED CHUCKS!
|
| Ultra Loc 15 Pc Set
...plus other(s)
|
LET YOUR CORDLESS (OR CORDED) DRILL/DRIVER TACKLE JUST ABOUT EVERY DRIVING AND DRILLING SITUATION IMAGINABLE. THESE VERSATILE QUICK CHANGE BIT SETS LET YOU HANDLE SCREW DRIVING, VARIOUS KINDS OF DRILLING AND EVEN NUT AND BOLT DRIVING:
950-210 (CC2120) - BOSCH CLIC CHANGE™ QUICK CHANGE BIT SYSTEM: 10 PIECE SET INCLUDES CLIC CHANGE™ CHUCK; 3/32", 1/8" AND 3/16" HEX SHANK DRILL BITS; 1/4" SOCKET DRIVE ADAPTER; #1 AND TWO #2 PHILLIPS SCREWDRIVER BITS, #6-8 SLOTTED SCREWDRIVER BIT AND A #2 SQUARE RECESS BIT.
950-217 (784874-A) - MAKITA® ULTRALOK™ FAST CONNECT SYSTEM: 15 PIECE SET INCLUDES ULTRALOK™ BIT HOLDER; SHORTY FINDER/DRIVER WITH #2 PHILLIPS BIT; 1/16", 1/8", 5/32" AND 3/16" HEX DRIVE BITS; PHILLIPS #1, #2 AND #3 BITS; A SLOTTED BIT; HEX TO 1/4" SQUARE DRIVE ADAPTER; 5/16", 3/8" AND 1/2" ONE-QUARTER INCH DRIVE SOCKETS AND A STORAGE CASE.
IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Dovetail Jigs
|
SET - MATCH MAKER TO FIT RYOBI RE600,MAKITA 3612/3
|
| Set - Match Maker To Fit Ryobi Re600,makita 3612/3
...plus other(s)
|
|
MATCHMAKER FOR BOSCH MATCHMAKER BASE UNIT A RODS FOR BOSCH MATCHMAKER
|
|
|
|
Portable Power Tool Accessories - Cordless
|
MAKITA® LXT400 FOUR PIECE CORDLESS COMBO KIT
|
| Makita 194205-3 18v Slide Battery
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Cordless
|
REPLACEMENT CORDLESS TOOL BATTERIES FIT MOST POPULAR BRANDS
|
| 12v 1.4h-h Battery, Makita Stick Type
...plus other(s)
|
THERE'S NO REASON TO SPEND MORE WHEN YOU CAN PURCHASE COST EFFECTIVE TOPCELL™ NICD REPLACEMENT BATTERIES THAT ARE COMPARABLE TO THE O.E.M. BATTERIES THAT CAME WITH YOUR CORDLESS TOOLS:
MAKITA®:
9.6V, 1.4AH MK-9614S - 4093D, 4190D/DW, 4300D/DW, 4390D/DW, 5090D/DW, 6012HDW/HDL, 6092DW, 6093DW, 6094DW, 6095D/DW/DWBE/DWBLE, 6096DWE/DWLE, 6891DW, 6900/DW, 8402VD/VDW, DA390/DW, DA391D/DW, ML900, ML901, ML902, T220D/DW, UM1690D, UM1691D. 12V, 1.4AH MK-1214S - 5092D/DW, 6011DW/DEW-2.
MILWAUKEE®:
14.4V, 2.0AH ML-1420 - POWER-PLUS, WORKLIGHT, 0511-21 KIT, 0512-21/25, 0513-20, 0514-20/24/52, 0516-20/22/52, 49-24-0150, LOKTOR P 14.4, LOKTOR S 14.4 TX/TX NIMH, PAS 12PP, PN 12PP, PPS 12PP, PSG 12PP AND PSM 12PP. ALSO FITS AEG® BATTERY LIGHT PL, BL MULTI-VOLT LAMP, BDSE 14.4T SUPER TORQUE, BS2E 14.4T AND SB2E 14.4 SUPER TORQUE. 18V, 2.2AH ML-1822 - 0521-20/21/22, 0522-20/21/22/24/25/52, 0523-20/22, 0524-20/22/24/52, 1109-20/21/52, 3109-21, 5361-20/21/52, 6515-20/21/22/23/52, 49-24-0160, LOKTOR H 18, LOKTOR P 18 TX, LOKTOR S 18 TX/TX NIMH/PX, PSH 18, PIW 18, PMS 18/0, PSX AND POWER PLUS 18V WORK LIGHTS. ALSO FITS AEG® 18 SUPER TORQUE AND PN 18X.
PORTER-CABLE®:
19.2V, 2.2AH PC-1922 - 643, 881, 9290, 9837, 9845, 9884CS/RJS/TS, 9887/QP/RS. 14.4V, 2.0AH PC-1420 - 879, 9876, 9878, 9877, 9878CS. 12V, 1.4AH PC-1214 - 869, 9866F, BN200V12.
DEWALT®:
18V, 2.2AH DW-1822 - DW073K, DW2PAK2, DW4KIT2, DW5KIT2, DW908, DW919, DW929K-2, DW932K, DW933/K/K-2, DW936K, DW938K/K-2, DW958K-2, DW987K-2, DW988K-2/KJ-2/KR-2/KS-2, DW989K-2, DW995B/K-2, DW997K-2, DW998K-2/KW, DW999K-2, HP932K-2. 14.4V, 2.0AH DW-1420 - DW906, DW911, DW918, DW928K-2, DW931K, DW935K, DW937K, DW941K-2, DW954K-2, DW966K, DW969K-2, DW983K, DW984K-2/KS-2, DW985K-2, DW990K-2, DW991B/K-2/KC-2/KQ-2/KS-2, DW996K-2/KV-2, CD632K, CRS144, HP532K-2. 12V, 1.4AH DW-1214 - DD904, DW917, DW927K-2, DW930K, DW940K-2, DW952K-2, DW953K-2, DW965K, DW968K-2, DW970, DW971K-2, DW972B/K-2/KQ-2, DW975B/K, DW977B/K, DW979K, DW980K-2, DW981KD-2/KF-2, HP331K-2, CK431K.
BOSCH:
18V, 2.2AH BH-1822 - 3860CK/RK/K/CRK, 1659K/RK, 1644K. 14.4V, 2.0AH BH-1420 - 3660K. 12V, 1.4AH BH-1214 - GSR 12 VE-2, GSB 12 VE-2, GSR 12-1.
PANASONIC®:
12V, 1.4 AH PN-1214 - EY6407NQKW, EY6406FQKW, EY6101FQKW, EY6100FQKW, EY3790B, EY3502FQMKW, EY3503FQWKW.
BATTERIES ARE BUILT USING PANASONIC® AND SANYO® CELLS AND COMPONENTS - ALL ARE TESTED FOR MAXIMUM PERFORMANCE AND RELIABLILITY. RECHARGE USING YOUR ORIGINAL BATTERY CHARGER. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Circular Saw
|
SAVE MONEY IF YOU NEED TO REPLACE YOUR POWER MITER SAW DUST COLLECTION BAG
|
| Dustbag For Hd3812
|
ORIGINALLY A FACTORY REPLACMENT FOR THE SKIL® HD3812 12" COMPOUND MITER SAW, SKIL® 80165 DUST COLLECTION BAGS WILL ALSO FIT BOSCH MITER SAWS THAT USE BA165 DUST COLLECTION BAGS AND SEVERAL OTHER MITER SAW BRANDS:
SPRING CLIP HOLDS 14" LONG GRAY CLOTH BAG ONTO MITER SAW DUST CHUTE ELBOW - 8" BOTTOM ZIPPER FOR EASIER EMPTYING. FITS POWER MITER SAWS WITH 1-1/4" OD DIA. DUST COLLECTION TUBES, E.G, DEWALT®, MAKITA®, MILWAUKEE® AND OTHERS (MEASURE BEFORE ORDERING). IMPORTED.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Portable Power Tool Accessories - Carvers
|
YOU CAN TURN YOUR ANGLE GRINDER INTO A POWER CARVER!
|
| Lancelot 22t Carving Blade
...plus other(s)
|
MOUNT ONE OF THESE UNIQUE CHAIN SAW CUTTERS ONTO YOUR 4" OR 4-1/2" ANGLE GRINDER (5/8" THREADED SHAFT) AND YOU'VE GOT A MULTI-DIRECTIONAL CARVER. BLADES FEATURE 1/4" CHAIN SAW SANDWICHED BETWEEN TWO STEEL DISCS AND ARE PERFECT FOR RAPID WOOD REMOVAL, CUTTING AND GENERAL SHAPING OF MANY KINDS OF MATERIALS:
LANCELOT® 45822 AND 45814, 22- AND 14-TEETH BLADES, ARE 4" DIA. SQUIRE® 35818 AND 35812, 18- AND 12-TEETH BLADES, ARE 3-1/2" DIA. USING 5/8" UNIVERSAL ARBOR NUT 13750, UP TO THREE BLADES CAN BE TANDEM-MOUNTED ONTO ONE ANGLE GRINDER (4-1/2" ONLY) FOR FASTER CUTTING. DON'T STOP A PROJECT TO SHARPEN YOUR CHAIN! SIMPLY FIT A LANCELOT® 40022 OR 40014, 22- OR 14-TEETH, OR SQUIRE® 30012, 12-TEETH, REPLACEMENT CHAIN AND SHARPEN THE DULL ONE AT YOUR CONVENIENCE (CHAINS NOT INTERCHANGEABLE WITH DIFFERENT-SIZE DISCS). NOTE: MANUFACTURER DOES NOT RECOMMENDED USING CHAIN SAW CUTTERS ON MAKITA® ANGLE GRINDERS. USA.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
JOINTER KNIVES AND PLANER BLADES
|
| 10" Planer Knives
...plus other(s)
|
HAVING AN EXTRA SET OF PLANER OR JOINTER KNIVES CAN ELIMINATE DOWNTIME BECAUSE YOU CAN CHANGE KNIVES WHEN ONE SET GETS DULL, IF YOU CHIP A KNIFE, OR NEED A SUPER SMOOTH CUT LATE IN THE PRODUCTION SCHEDULE:
HIGH SPEED STEEL, UNLESS OTHERWISE NOTED. CHECK YOUR PLANER AND JOINTER MANUAL FOR THE CORRECT SIZE. IMPORTED.
PLANER KNIVES:
731-002 - RYOBI® AP-10. 900-860 - WOODTEK® 12". 813-903 - PARKS®, POWERMATIC®. 902-411 - WOODTEK® 12" (CARBIDE TIPPED). 22-562 - DELTA® 22-560. 899-642 - JET, GRIZZLY®, RELIANT, RBI 612, 812. 22-547 - DELTA® 12" 22-540. 914-099 - DEWALT® DW733. 928-567 - JET JPM-13. 22-656 - DELTA® RC-33. 821-385 - WOODTEK® 15", GRIZZLY®, RELIANT, TTL. 934-883 - JET JWP-15CSW. 22-677 - DELTA® DC-380. 945-857 - MAKITA® 2040. 813-896 - PARKS® 20", JET JW208-K. 817-449 - WOODTEK® 20".
JOINTER KNIVES:
147-060 - DELTA® 4", ATLAS PRESS CO. 147-059 - OLD DELTA® AND WOODTEK® 6", BOICE-CRANE, CRAFTSMAN®, TTL. 947-478 - GRIZZLY® 6". 37-155 - DELTA® DJ-15 6". 37-658 - DELTA® 6" DELUXE. 37-072 - DELTA® 6" PORTABLE 37-070. 147-058 - OLD DELTA® AND WOODTEK® 8", BOICE-CRANE, TTL. 37-355 - DELTA® DJ-20 8". 945-864 - JET JJ-8 8"
SOLID CARBIDE JOINTER KNIVES:
859-630. 859-637. 859-644 - OLD DELTA®, WOODTEK® 8".
|
|
|
|
Machinery Accessories - Jointers & Planers
|
WIXEY™DIGITAL PLANER-CUT DEPTH GAUGE OFFERS AN ULTRA-ACCURATE ALTERNATIVE TO CLUMSY CALIPERS
|
| Digital Planer Readout
|
THIS UNIQUE ELECTRONIC PLANER GAUGE DISPLAYS YOUR EXACT CUTTING DEPTH, IN DECIMALS WITH FRACTIONS, OR IN MILLIMETERS, WITH ABSOLUTE PRECISION:
ENDS THE GUESSWORK AND CONTINUAL CHECKING OF PLANER STOCK DEPTH WITH CALIPERS. MOUNTS IN MINUTES RIGHT ONTO YOUR PORTABLE PLANERS STOCK HEIGHT GAUGE. LARGE LED READOUT IS ACCURATE TO 1/32" IN FRACTIONS (.005" DECIMAL) AND DOWN TO 0.1 MM IN METRIC. MEASURES CUTS UP TO 6" HIGH. MOUNTS TO DEWALT®, DELTA®, RIDGID®, RYOBI®, MAKITA®, CRAFTSMAN AND OTHER PORTABLE PLANERS.
|
|
|
|
Advanced Search Tools
Browse
will