|
|
|
Machinery - Boring
|
BLUM MINIPRESS M53.1053*US BORING MACHINE
|
| Minipress Boring Machine 220v/1ph
...plus other(s)
|
THE BLUM® MINIPRESS P IS AN EASY TO USE MACHINE, DESIGNED FOR BORING ALL HINGE AND MOUNTING PLATE SYSTEMS, METABOX™ FRONT FIXING BRACKETS AND 32MM LINE BORING FOR CABINET SIDES USING OPTIONAL 8-SPINDLE END MOUNTED OR 9-SPINDLE CENTER-MOUNTED LINE BORING HEAD:
135-233 220V, 1PH MOTOR OR 135-239 220V, 3PH AVAILABLE BY SPECIAL ORDER. SPINDLE CONFIGURATION IS ADJUSTED BY A 90° ROTATION OF THE HEAD WITH ONE SETTING DEDICATED TO THEBLUM® HINGE BORING PATTERN. THE NEW MODEL MINIPRESS™ FEATURES AN ADAPTER RING MOUNT TO ACCEPT THE OPTIONAL LINE BORING HEADS. PRESET DEPTH POSITIONS AND ADJUSTABLE FENCE STOPS MAKE SETUPS SIMPLE. THE MACHINE FEATURES A FIVE SPINDLE SWIVELING HEAD, PNEUMATIC MOISTURE TRAP, ADJUSTABLE STROKE AND BORING DEPTH, PNEUMATIC HOLD DOWN CLAMPS, SWING ARM FOR INSERTION RAM, DUST EVACUATION JET AND DUST COLLECTION ADAPTER. WORK TABLE, CENTER RULER, FOUR RULER STOPS, TWO FIXED BORING DEPTH STOPS, REPLACEMENT BREAKAWAY CLUTCH AND TOOL KIT INCLUDED. OPTIONAL INSERTION RAMS ARE AVAILABLE FOR MOST COMPONENTS. 158-543 OPTIONAL 8-SPINDLE LINE BORING HEAD IS END MOUNTED AND DRILLS EIGHT HOLES SPACED 32MM APART PERPENDICULAR TO THE FENCE. 158-540 OPTIONAL 9-SPINDLE LINE BORING HEAD IS CENTER MOUNTED AND DRILLS 9 HOLES, 32MM APART PARALLEL TO THE FENCE. 158-546 SPINDLE HEAD RETROFIT SET IS AVAILABLE TO CONVERT MINIPRESS™ MACHINES PRODUCED IN 2009 OR BEFORE TO ACCOMMODATE THE NEW BORING HEADS. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
|
|
|
|
Machinery - Boring
|
POWERMATIC® CBM21 LINE BORING MACHINE PROVIDES BOTTOM TO TOP DRILLING
|
| Cbm21 Cabinet Line Boring Machine
...plus other(s)
|
THE POWERMATIC® CBM21 21 SPINDLE LINE BORING MACHINE FEATURES A FULLY ADJUSTABLE BORING HEAD WITH DIGITAL READOUT THAT CAN DRILL VERTICALLY OR HORIZONTALLY AND LOCK AT ANY ANGLE IN BETWEEN:
2-1/2HP, 230V, 1PH MOTOR STARTS ONLY WHEN PNEUMATIC FEED CYCLE IS ACTIVATED BY THE FOOT PEDAL (90 PSI AIR SUPPLY REQUIRED). SIX POSITION TURRET STOP MAKES DRILLING DEPTH ADJUSTMENTS SIMPLE. CLAMP BAR WITH "GRIP TITE" SURFACE ENSURES PNEUMATIC WORK HOLD DOWNS STAY IN POSITION. 0-3-1/8" DRILLING DEPTH STROKE - 32MM BETWEEN CENTERS. 6" DEEP THROAT. 3,450 RPM SPINDLE SPEED. REQUIRES 11 RIGHT- AND 10 LEFT-HAND BORING BITS (NOT INCLUDED). 17-1/4" X 35" TABLE. 60" ADJUSTABLE BACKFENCE WITH FOUR FLIP STOPS LOCATES MATERIAL WITH PRECISION. COMES WITH TWENTY-ONE 10MM QUICK CHUCKS, TWO ADJUSTABLE FENCES FOR SMALL AND LARGE PANELS, FOOT PEDAL, TOOL KIT AND INSTRUCTIONS. 48"H X 31"W X 49"L. 682 LBS. NET WEIGHT; 841 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
POWERMATIC® LBM21 LINE BORING MACHINE
|
| Lbm21 Line Boring Machine
...plus other(s)
|
THE POWERMATIC® MODEL LBM21 21 SPINDLE LINE BORING MACHINE IS A SINGLE ROW LINE DRILL IDEAL FOR DRILLING SHELF SUPPORT HOLES, DRAWER SLIDE HOLES AND HINGE BASE PLATE HOLES:
2-1/2HP, 230V, 1PH MOTOR STARTS ONLY WHEN PNEUMATIC FEED CYCLE IS ACTIVATED BY THE FOOT PEDAL (90 PSI AIR SUPPLY REQUIRED). 0-2" DRILLING DEPTH STROKE - 32MM BETWEEN CENTERS. 6" DEEP THROAT. 3,450 RPM SPINDLE SPEED. REQUIRES 11 RIGHT- AND 10 LEFT-HAND BORING BITS (NOT INCLUDED). 19" X 47-1/4" TABLE. 60" FENCE WITH FOUR FLIP STOPS LOCATES MATERIAL WITH PRECISION. TWO MANUAL, HEAD-MOUNTED INDEX PINS PROVIDE PRECISE POSITIONING OF LONGER STOCK. COMES WITH TWENTY-ONE 10MM QUICK CHUCKS, FOOT PEDAL, ADJUSTABLE BACKFENCE AND INSTRUCTIONS. 63"H X 24"W X 49"L. 340 LBS. NET WEIGHT; 526 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Boring
|
GENERAL INTERNATIONAL® 13 SPINDLE BORING MACHINE
|
| 13" Spindle Boring Machine W/ Stand
...plus other(s)
|
MODEL #75-440 M1 13 SPINDLE BORING MACHINE HAS A FULLY ADJUSTABLE FENCE SYSTEM WITH EASY TO READ SCALES IN BOTH INCHES AND METRIC FOR QUICK SETUP AND ACCURATE BORING. CONSTRUCTED IN HEAVY-DUTY CAST-IRON AND MACHINED WITH PRECISION. INDEXING PINS MAINTAIN CORRECT SPINDLE ALIGNMENT FOR RESUMING LINE BORING OPERATIONS IN LONG WORKPIECES. WORK STOPS ON EITHER END OF FENCE LINE UP WORK FROM THE LEFT OR RIGHT FOR PERFORMING PARALLEL BORING PATTERNS.
POWERFUL 1/2HP MOTOR DELIVERS PLENTY OF POWER AND SPEED FOR MULTIPLE HOLD BORING, EVEN IN THE TOUGHEST LAMINATES. MANUAL OPERATION REQUIRES MINIMAL MAINTENANCE. OPEN BASE STEEL STAND INCLUDED.
DRILLING HEAD CAN BE EASILY REMOVED AND REPLACED WITH OPTIONAL BLUM STYLE HINGE BORING ATTACHMENT WITHOUT THE NEED FOR SPECIAL TOOLS.
FEATURES:
13 SPINDLES 6 LEFT, 7 RIGHT. 32MM SPINDLE CENTERS, 3450 RPM SPINDLE SPEED. TABLE SURFACE IS 31-1/2" X 15-3/4", HEIGHT FROM FLOOR IS 33-3/8". MAXIMUM DEPTH OF BIT TO FENCE IS 4", MAXIMUM DEPTH OF STROKE IS 2-12", AND MAXIMUM STOCK THICKNESS IS 5-1/2". POWERFUL 1-1/2HP, 110V, 1PH, 12.6A MOTOR. ADJUSTABLE DEPTH STOP CONTROL.
|
|
|
|
Machinery - Boring
|
DELTA® 13 SPINDLE LINE BORING MACHINE
|
| 13 Spindle Line Boring Machine
...plus other(s)
|
THE DELTA® 32-325 13 SPINDLE BORING MACHINE PROVIDES A FULL 12" OF WORK SPACE IN FRONT OF THE BORING HEAD TO HANDLE EXTRA-LARGE BOARDS:
3/4HP, 120V, 1,725 RPM, 1PH MOTOR. SEE-THROUGH SPINDLE GUARD FOR SAFETY - 10MM COLLETS, 4" THROAT CAPACITY. ADJUSTABLE DEPTH STOP CONTROLS THE 2" DOWNWARD TRAVEL. TELESCOPING HANDLE EXTENDS FROM 16" TO 23" FOR INCREASED LEVERAGE - RETRACTS WHEN NOT IN USE. FULLY ADJUSTABLE 16" X 29-3/4" TABLE AND FENCE HAVE ENGLISH AND METRIC SCALES FOR QUICK SET-UP AND ACCURATE BORING. INDEXING PINS HELP MAINTAIN CORRECT SPINDLE ALIGNMENT FOR RESUMING LINE BORING OPERATIONS IN LONG WORKPIECES. WORK STOPS ON EITHER END OF THE FENCE ALLOW YOU TO LINE UP WORK FROM THE LEFT OR RIGHT FOR PERFORMING PARALLEL BORING PATTERNS. STEEL SUPPORT STRUCTURE AND BASE - PRE-DRILLED FOR BENCH OR STAND MOUNTING (STAND SOLD SEPARATELY). 32-1/2"H X 30"W X 28-1/2"L. NET WEIGHT 98 LBS.; 125 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. USA. SEVEN RIGHT-HAND (RH) AND SIX LEFT-HAND (LH) 5MM BRADPOINT BORING BITS REQUIRED (SOLD SEPARATELY). OPTIONAL FENCE EXTENSION ADDS 30" TO EXISTING FENCE.
|
|
|
|
Portable Power Tool Accessories - Jigs And Fixtures
|
LINE BORING MACHINE CAN BE POWERED BY ALMOST ANY 3/8" ELECTRIC DRILL
|
| Euro Bore-a-line Drill Jig
...plus other(s)
|
COMPACT, PORTABLE AND SUITED TO SHOP OR FIELD APPLICATIONS, THE EURO® BORE-A-LINE FIXTURE LETS YOU DRILL THREE HOLES AT A TIME ON 37MM CENTERS (SETBACK CAN BE ADJUSTED FOR 32MM CENTERS):
AUTOMATIC POSITIONING OF FIRST HOLE ELEVATION - AUTOMATIC BORING DEPTH STOP. NON-SKID BASE PREVENTS WORK PIECE DAMAGE AND HELPS KEEP FIXTURE FROM MOVING WHILE YOU'RE DRILLING. BASE AND BRIDGE ARE MACHINED HEAVY DUTY PVC, BEARINGS ARE BRASS AND BRONZE AND SHAFT IS MACHINED STEEL. 6-1/2"H X 6-1/4" WIDE X 4-3/4"D, WEIGHS 2-3/4 LBS. INSTRUCTIONS INCLUDED - 2 LH AND 1 RH 5MM DIA. OR 1/4" DIA. X 57MM LONG BORING BITS REQUIRED (NOT INCLUDED). USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Advanced Search Tools
Browse
will