|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
ADJUSTABLE BRAKING FLAP STAY
|
| Right Hand Braking Flap Stay
...plus other(s)
|
ADJUSTABLE BRAKING ACTION FLAP STAYS HAVE AN UP-FRONT ADJUSTMENT SCREW ALLOWING YOU TO CONTROL THE RATE OF MOVEMENT ACCORDING TO FLAP WEIGHT AND SIZE:
8-10 LBS. MAXIMUM WEIGHT - DESIGNED FOR SMALLER LIDS AND FLAPS. CHROMED STEEL ROD WITH BLACK NYLON SLIDER CONTROL AND ENDS. 8" OVERALL LENGTH; NON-REVERSIBLE (SCREWS INCLUDED). CHOOSE FROM RIGHT- OR LEFT-HAND MODELS."
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
DECORATIVE BRASS DOOR CHAIN STAY
|
| Decorative Door Chain
...plus other(s)
|
BRASS PLATED CHAIN STAY FEATURES TWO-HOLE MOUNTING PLATES ON EACH END OF THE CHAIN. AN ATTRACTIVE STAY FOR LIGHTWEIGHT LIDS OR DOORS:
CHAIN 7-1/2". MOUNTING PLATES 5/16"W X 3/8"H X 1"L. MOUNTING SCREWS INCLUDED.
BRASS PLATED, BULK JACK CHAIN IS DESIGNED FOR LIGHT DUTY APPLICATIONS. MOUNT USING A #4 OR LARGER ROUND HEAD SCREW AT EACH END. BULK CHAIN SOLD IN ONE FOOT LENGTHS.IMPORTED"
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
SOLID BRASS LOCKING LID STAY
|
| Lockable Door Stay
|
HEAVY BRASS LOCKABLE DOOR STAY WILL KEEP A DOOR OR LID FROM SLAMMING SHUT AND IS POLISHED AND LACQUERED FOR A GREAT APPEARANCE:
THUMBSCREW ADJUSTMENT KNOB CONTROLS DOOR MOVEMENT. 9-1/2 OAL; 8" TRAVEL (SCREWS INCLUDED). IMPORTED.
LIMITED TO QUANTITIES ON HAND"
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
REVERSING FRICTION LID STAY
|
| Straight Lid Support
|
REVERSIBLE FOR RIGHT OR LEFT HAND APPLICATION, THE STRAIGHT FRICTION LID SUPPORT IS MADE FROM BRASS PLATED STEEL:
6-1/4" ARM LENGTH (MOUNTING SCREWS INCLUDED). IMPORTED."
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
SPRING LOADED FRICTION LID STAY
|
| Friction Stay 6" Wide
|
THESE SPRING LOADED LID STAYS DAMPEN MOVEMENT FOR SMOOTH, CONSISTENT ACTION EITHER OPENING OR CLOSING:
FRICTION DISCS HOLD LID OPEN AT ANY HEIGHT. 6" LENGTHSTURDY STEEL MECHANISM WITH STATUARY BRONZE FINISH. SOLD IN HANDED PAIRS WITH MOUNTING SCREWS INCLUDED."
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
SPRING LOADED LID SUPPORTS HAVE CONSUMER PRODUCT SAFETY COMMISSION (CPSC) ENDORSEMENT
|
| Lh L/sup (grey) 20 To 35
...plus other(s)
|
SPECIFICALLY CITED BY THE CPSC FOR PROTECTING CHILDREN FROM INJURIES OR DEATH CAUSED BY FALLING LIDS ON TOY CHESTS, TRUNKS, WOODEN STORAGE CHESTS OR SIMILAR ITEMS, CARLSON CAPITOL LID SUPPORTS WON'T LET LIDS FALL - PERIOD! WHEN PROPERLY INSTALLED, THESE SPRING LOADED SUPPORTS PROVIDE THE PROPER TORQUE TO ENSURE THAT A HINGED LID STAYS OPEN IN THE POSITION TO WHICH IT WAS RAISED:
TO DETERMINE SUPPORTS REQUIRED FOR YOUR APPLICATION, MULTIPLY ONE-HALF THE DISTANCE - IN INCHES - FROM THE FRONT TO THE BACK OF THE LID TIMES THE WEIGHT OF THE LID - IN POUNDS:
EXAMPLE: 1/2 OF A 20"D LID IS 10" - MULTIPLY 10" X THE 9 LB. WEIGHT OF THE LID TO GET 90 IN./LBS. TORQUE. THIS MEANS A LEFT HAND (100-039), RIGHT HAND (100-038) OR CENTER MOUNT (905-711) 65-95 IN./LBS. TORQUE LID SUPPORT SHOULD BE SUFFICIENT.
WHEN USING TWO SUPPORTS, DIVIDE THE TORQUE NUMBER IN HALF:
EXAMPLE: THE SAME 90 IN./LBS. LID WOULD REQUIRE LEFT HAND (100-033) AND RIGHT HAND (100-032) 40-45 IN./LBS. TORQUE LID SUPPORTS.
LEFT HAND, RIGHT HAND OR CENTER MOUNT SUPPORTS AVAILABLE (SCREWS NOT INCLUDED). ALL MOUNTING DIMENSIONS ARE MEASURED FROM THE CENTER OF THE HINGE PIN. NOTE: AS INDICATED BELOW, SPRINGS ARE COLOR CODED TO MATCH CAPACITIES. HOWEVER, ALL LID SUPPORTS FEATURE AN ANTIQUE COPPER EXTERIOR FINISH. USA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 STATUARY BRONZE SCREWS 946-245.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
THE ONE LID STAY THAT IS CONVERTIBLE, REVERSIBLE, ADJUSTABLE AND DEMOUNTABLE
|
| Convertible Lid Stay
|
STRONG, DIE CAST NICKEL PLATED DELTA CONVERTIBLE LID STAYS STOP THE LID AT INTERMEDIATE POSITIONS AND ALLOW YOU TO PRECISELY ADJUST THE BRAKING POWER:
8"L STAY SUPPORTS LIDS UP TO 20 LBS. ALL HOLES FIT 32MM CENTERS AND CAN BE PLACED 27MM OR 32MM FROM THE EDGE. SIMPLY FASTEN THE BRACKETS TO THE CABINET, THEN SNAP THE SUPPORT INTO PLACE. TENSION CAN BE REVERSED TO SUIT LIFT-UP OR DROP-DOWN FUNCTIONS. OPENING ANGLE ADJUSTS FROM 75° TO 90° BY BRACKET RELOCATION. INSTRUCTIONS INCLUDED (MOUNTING SCREWS NOT INCLUDED).
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
ONE STAY PROVIDES SOFT CLOSING FOR UPWARD OPENING DOORS OR CHEST LIDS
|
| Soft Down Door Stay
|
O SUGATSUNE™ DOOR SUPPORT UTILIZES SPRING-LOADED DAMPING ACTION TO PROVIDE SOFT CLOSING FOR OVERHEAD DOORS, TOP OPENING DOORS AND CHEST LIDS:
ONE SUPPORT WILL HANDLE A 25/32" DOOR OR CHEST LID UP TO 24" X 24". USE TWO SUPPORTS ON LARGER DOORS. REFER TO THE 812-811SPECIFICATIONS.PDF BELOW FOR WEIGHT RANGE FOR EACH APPLICATION (MODEL SDS-C301N) WORKS EQUALLY WELL FOR LIDS ON TOY BOXES OR STORAGE CHESTS. REFER TO THE 812-811INSTALL.PDF BELOW FOR COMPLETE INSTALLATION INSTRUCTIONS FOR EACH TYPE OF APPLICATION. PLASTIC HOUSING WITH NICKEL PLATED STEEL ARM. WORK WITH BUTT, EURO STYLE HINGES OR CONTINUOUS (PIANO)HINGES(MOUNTING SCREWS AND INSTRUCTIONS INCLUDED). JAPAN
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
LID STAY PROVIDES SOFT CLOSING FOR CHESTS
|
| Soft Down Lid Stay
|
LID STAY UTILIZES SPRING-LOADED DAMPING ACTION TO PROVIDE SOFT CLOSING FOR LIDS:
ONE STAY WILL HANDLE A 25/32" THICK LID UP TO APPROXIMATELY 24" X 24" - USE TWO ON LARGER SIZES. PLASTIC HOUSING WITH NICKEL-PLATED STEEL ARM (MOUNTING SCREWS AND INSTRUCTIONS INCLUDED). USE ONLY WITH BUTT OR CONTINUOUS (PIANO) HINGES.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.