NARROW RESULTS Results are sorted by product category.
(Clicking on the  will
narrow the results by subcategory)
|
|---|
Machinery Accessories (88)
Lathes (88)
|
|
|
Machinery Accessories - Lathes
|
ONEWAY CHUCK ADAPTERS
|
| 3/4"-16tpi Adapter, Oneway/talon
...plus other(s)
|
ONEWAY CHUCK ADAPTERS FIT ONEWAY CHUCKS TO VARIOUS LATHE SPINDLES. THEY ALSO ALLOW YOU TO SWITCH FROM ONE LATHE TO ANOTHER WITHOUT BUYING SEVERAL CHUCKS. FULLY MACHINED IN ONE SET UP, THE UNIQUE TAPER-LOCK DESIGN IS GUARANTEED TO RUN TRUE TO YOUR LATHE SPINDLE AND THE POSSIBILITY OF THE ADAPTOR LOOSENING OR SEPARATING FROM THE CHUCK BODY IN NORMAL USE OR WHEN REVERSING THE LATHE HAS BEEN SUCCESSFULLY ELIMINATED:
ONEWAY/TALON ADAPTERS FIT BOTH CHUCKS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCKS - 959-585. TALON CHUCKS - 959-627. STRONGHOLD CHUCKS - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY SPIGOT JAWS
|
| Profiled Spigot Jaws, Oneway
...plus other(s)
|
MACHINED LONG AND DEEP, ONEWAY SPIGOT JAWS ARE DESIGNED FOR GRIPPING SMALL SPIGOTS WITH EXTRA HOLDING POWER:
STRONGHOLD SPIGOT JAWS HAVE SERRATIONS ON INSIDE AND OUTSIDE. ONEWAY/TALON SPIGOT JAWS HAVE SERRATIONS ON THE OUTSIDE ONLY. AVAILABLE IN PROFILED AND SMOOTH. NOT FOR USE WITH WOODWORM SCREW. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #3 JAWS
|
| #3 Profiled Jaws, Oneway
...plus other(s)
|
DESIGNED FOR AVERAGE TO HEAVY CUTTING APPLICATIONS, ONEWAY #3 JAWS WILL ACCOMMODATE MEDIUM TO LARGE SIZED TURNINGS. PROFILED JAWS WILL HOLD ROUND AND SQUARE END STOCK WHILE SMOOTH JAWS ARE DESIGNED FOR ROUND STOCK ONLY:
PROFILED JAWS HAVE INTERNAL SERRATIONS FOR BETTER GRIPPING POWER. SMOOTH JAWS HAVE SMOOTH DOVETAILS TO HELP MINIMIZE SURFACE MARRING. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY FLAT JAWS
|
| Flat Jsws, Oneway
...plus other(s)
|
MAKE CUSTOM JAWS AND MOUNTS BY SCREWING BLOCKS OF WOOD ONTO THE ONEWAY FLAT JAWS AND TURNING THEM TO THE DESIRED SHAPE:
NO CAPACITIES RECOMMENDED. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY JUMBO JAWS
|
| Mini Jumbo Jaws, Oneway/talon
...plus other(s)
|
MADE OF MACHINED ALUMINUM, ONEWAY JUMBO JAWS HAVE STANDARD RUBBER BUTTONS TO HOLD TURNINGS FOR BOTTOM FINISHING. ALSO USED FOR HOLDING OUT-OF-ROUND OBJECTS OR MOUNTING SPECIALTY HOLDING JIGS:
MINI-JUMBO JAWS FIT LATHES WITH 10" SWINGS AND LARGER. STANDARD JUMBO JAWS FIT LATHES WITH 12" SWINGS AND LARGER. MEGA-JUMBO JAWS FIT LATHES WITH 14" SWINGS AND LARGER. WOODEN "FALSE-JAW" JIGS CAN BE DESIGNED AND USED ON JUMBO JAWS FOR PRECISION FINISHING AND OTHER APPLICATIONS. IMAGE SHOWS JUMBO JAWS ON TALON CHUCK. ACCESSORY BUTTON SETS FIT ALL JUMBO JAWS. CANADA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY INTERNAL STEP JAWS
|
| Internal Step Jaws
|
DESIGNED SPECIFICALLY FOR SMALLER TURNINGS, ONEWAY INTERNAL STEP JAWS WILL EXPAND INTO TURNED RECESSES FOR LIGHT CUTTING ON SMALL TO MEDIUM SIZED TURNINGS:
JAWS HAVE THREE SEPARATE DOVETAIL SHAPED STEPS. THE INTERIOR JAWS HAVE SERRATIONS FOR HOLDING SMALL SPIGOTS. NOT AVAILABLE FOR STRONGHOLD CHUCK. NOT FOR USE WITH WOODWORM SCREW. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627.
|
|
|
|
Machinery Accessories - Lathes
|
MEGA JUMBO JAWS FOR STRONGHOLD CHUCKS
|
| Mega Jumbo Jaws, Stronghold
|
MACHINED ALUMINUM MEGA JUMBO JAWS HAVE STANDARD RUBBER BUTTONS OR YOU CAN MOUNT AND TURN WOODEN FALSE JAWS FOR PRECISION FINISHING OR OTHER LARGE APPLICATIONS:
ONLY FOR STRONGHOLD 16 AND LARGER SWINGS.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY CLAMP BLOCKS
|
| Clamp Block For 1-1/2" Bed Gap
...plus other(s)
|
MANY LATHES HAVE DIFFERENT BED GAPS WHICH IS THE DISTANCE BETWEEN THE TWO BED WAYS. IF YOU WANT TO USE A LATHE ACCESSORY LIKE THE ONEWAY BOWL STEADY, SPINDLE STEADY OR EASY-CORE ON A LATHE WITH A SPECIFIC BED GAP, ALL YOU NEED IS RIGHT CLAMP BLOCK:
1-1/2" BED GAP CLAMP BLOCK FITS DELTA® 14", JET® 1236, GRIZZLY 12", LAGUNA 18/47. 1-5/8" BED GAP CLAMP BLOCK FITS DELTA® 16" STEEL BED.. 1-3/4" BED GAP CLAMP BLOCK FITS GENERAL 160/260/25 SERIES, JET® 1442/1642, ONEWAY 16"/20"/24", WOODTEK® 12". 2" BED GAP CLAMP BLOCK FITS NOVA 3000 BED.. 2-1/2" BED GAP CLAMP BLOCK FITS POWERMATIC® 3520A/4224, RICON 70-500, VICMARC VL300, WOODFAST, WOODTEK® NO.1™.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY BOWL STEADY - 961-024. ONEWAY SPINDLE STEADY - 961-052. ONEWAY EASY CORE SYSTEM - 139-397.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #2 JAWS
|
| #2 Profiled Jaws, Oneway/talon
...plus other(s)
|
DESIGNED FOR LIGHTER CUTTING APPLICATIONS, ONEWAY #2 JAWS WILL ACCOMMODATE SMALL TO MEDIUM SIZED TURNINGS. PROFILED JAWS WILL HOLD ROUND AND SQUARE END STOCK WHILE SMOOTH JAWS ARE DESIGNED FOR ROUND STOCK ONLY:
PROFILED JAWS HAVE INTERNAL SERRATIONS FOR BETTER GRIPPING POWER. SMOOTH JAWS HAVE SMOOTH DOVETAILS TO HELP MINIMIZE SURFACE MARRING. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ONEWAY CHUCK - 959-585. TALON CHUCK - 959-627. STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
ONEWAY #4 JAWS
|
| #4 Profiled Jaws, Stronghold
...plus other(s)
|
DESIGNED FOR LARGE EXPANSION AND CONTRACTION GRIPPING, ONEWAY #4 JAWS WILL ACCOMMODATE MEDIUM TO LARGE SIZED TURNINGS:
PROFILED JAWS ARE SERRATED FOR STRONGER HOLDING. SMOOTH JAWS HAVE SMOOTH INTERNAL AND EXTERNAL DOVETAILS AND ARE DESIGNED FOR NON-MARRING LIGHT CUTTING APPLICATIONS. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
STRONGHOLD CHUCK - 959-979.
|
|
|
|
Machinery Accessories - Lathes
|
PROXXON MICRO TURNING LATHE
|
| 4 Jaw Chuck For Db 250
...plus other(s)
|
THE GERMAN-ENGINEERED PROXXON MODEL DB 250 MICRO WOODTURNING LATHE IS PERFECT FOR TURNING SMALL ITEMS SUCH AS PENS, CHESS FIGURES, MINIATURES AND MUCH MORE IN A QUIET, VIBRATION-FREE OPERATION. THE TOOL REST ROTATES 360°. FREE ACCESSORIES ADD ADDITIONAL VALUE TO THIS GERMAN MADE MICRO TURNING LATHE:
INCLUDES ROTATING TOOL REST, DRIVE CENTER, LIVE CENTER, FACEPLATES, 6-PIECE COLLET SET (2, 3, 4, 6, 8 AND 10MM), 3-PIECE TURNING SET, SAFETY GOGGLES AND SANDPAPER. NET WEIGHT - 5.5 LBS. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. GERMANY.
SPECIFICATIONS:
MOTOR - 1/5HP, 120VAC, 1PH. SPEED RANGE - 1,000 TO 5,000 RPM. SWING OVER BED - 3-1/8". DISTANCE BETWEEN CENTERS - 9-3/4". HEADSTOCK THROUGH HOLE - 3/8" (10MM). TAILSTOCK QUILL TRAVEL - 3/4". OVERALL DIMENSIONS - 21-5/8"L X 3-7/8"W X 6-1/8"H.
|
|
|
|
Machinery Accessories - Lathes
|
POWERMATIC® 3520B LATHE
|
| 50" Bed Extension W/leg
...plus other(s)
|
THE FULLY ACCESSORIZED POWERMATIC® MODEL 3520B WOOD LATHE HAS IMPROVED FEATURES IN THIS THIRD GENERATION MODEL INCLUDING AN ENHANCED DIGITAL TACHOMETER, SPINDLE INDEXING, IMPROVED TOOL REST LOCKING AND A LASER ETCHED TAILSTOCK QUILL. THE DRIVE SYSTEM USES A TWO-STEP, POLY V-BELT DRIVE WITH TWO REVERSIBLE VARIABLE SPEED RANGES: 50-1,200 AND 125-3,200 RPM. AN OPTIONAL 50" BED EXTENSION BRINGS THE BETWEEN CENTERS DISTANCE TO 84" AND CAN BE USED IN CONJUNCTION WITH AND OPTIONAL 26" DOUBLE-POSTED TOOL REST FOR EXTRA LONG SPINDLE TURNING. THE MOVABLE HEADSTOCK SLIDES TO THE END OF THE BED FOR 38" SWING OUTBOARD BOWL TURNING WHEN USED WITH THE OPTIONAL 18" BED EXTENSION BOLTED TO THE LOWER MOUNT HOLES:
OPTIONAL 50" BED EXTENSION INCLUDES LEG SUPPORT. OPTIONAL 26" DOUBLE-POSTED TOOL REST REQUIRES AN ADDITIONAL TOOLREST BASE ASSEMBLY FOR OPERATION. OPTIONAL 18" BED EXTENSION INCLUDES TOOLREST BASE POST EXTENSION. LATHE INCLUDES 14" TOOL REST, 3" FACE PLATE, SPUR DRIVE, LIVE CENTER, SAFETY SHIELD, TOOL TRAY, METAL SHELF, DEAD CENTERS (2), WRENCH, KNOCKOUT ROD, SPINDLE LOCK AND INSTRUCTION MANUAL. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 2HP, 230VAC, 6.2A, 3PH (REQUIRES 230V, 20A, 1PH CIRCUIT INPUT). SPEED RANGES (2): 0-1,200 AND 0-3,200 RPM. INBOARD SWING - 20" (16" OVER BASE). BETWEEN CENTERS - 34-1/2". OUTBOARD SWING 38" HEADSTOCK SHAFT: 1-1/4"-8TPI, #2MT, 5/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 4-1/2" TRAVEL, #2MT, 3/8" BORE, SELF-EJECTING. SPINDLE HEIGHT 44" (W/2" ADJUSTABLE FEET). DIMENSIONS - 58"H X 50"W X 24"D. NET/SHIPPING WTS 682/720 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
POWERMATIC LIVE CENTER - 134-792. ONEWAY STRONGHOLD CHUCK - 959-979. ONEWAY TALON CHUCK - 959-627. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE ACCESSORIES. TURNING TOOLS.
|
|
|
|
Machinery Accessories - Lathes
|
POWERMATIC LIVE CENTER
|
| Live Center Assembly, #2mt
|
POWERMATIC® LIVE CENTERS ARE CONSTRUCTED WITH LUBRICATED FOR LIFE, SEALED BALL BEARINGS MOUNTED IN TANDEM TO ENSURE VIBRATION FREE PERFORMANCE. THE STEEL BODY IS MACHINED TO EXACT TOLERANCES AND THEN HARDENED AND CHROME PLATED FOR A PRECISION FIT AND FINISH. ONLY THE CUP CENTER ROTATES FOR SAFETY AND DURABILITY:
3/4"-10RH CUP CENTER THREADS FIT LIVE CENTER ADAPTERS. SYSTEM INCLUDES #2MT LIVE CENTER, HARDENED CENTER POINT, ALUMINUM CONE POINT AND KNOCKOUT ROD. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ECONOMY DRIVE CENTERS - 136-883. JET DRIVE CENTERS - 136-922. ONEWAY DRIVE CENTERS - 882-917. SORBY STEBCENTERS - 137-168.
|
|
|
|
Machinery Accessories - Lathes
|
POWERMATIC® 4224 LATHE
|
| 1-1/4" To 1-1/2" Adapter
...plus other(s)
|
THE POWERMATIC® 4224 WOOD LATHE IS A LONG AND STRONG CAST IRON WOOD LATHE DESIGNED FOR LARGE BOWL AND SPINDLE TURNING. IT USES A 3-STEP, POLY V-BELT DRIVE WITH THREE VARIABLE SPEED RANGES: 0-910 RPM FOR HEAVY BOWL WORK, 0-2,000 RPM FOR STANDARD TURNING AND 0-3,500 RPM FOR HIGH SPEED SPINDLE AND FINISHING WORK. THE SPINDLE DIRECTION IS REVERSIBLE FOR OUTBOARD TURNING AND A REMOTE ON/OFF SWITCH MAGNETICALLY ATTACHES TO ANY PART OF THE LATHE. AN OPTIONAL 65" INBOARD BED IS AVAILABLE WHICH BRINGS THE INBOARD BETWEEN CENTERS DISTANCE TO 109". FOR LONG SPINDLE TURNING, AN OPTIONAL 26" DOUBLE-POSTED TOOL REST IS USED WITH A SECOND INBOARD TOOLREST BASE. A 48" SWING OUTBOARD TURNING ASSEMBLY IS ALSO AVAILABLE FOR FREE HANGING OPEN BOWL AND PLATTER TURNING:
OPTIONAL 65" INBOARD BED INCLUDES SUPPORT LEG. OPTIONAL 48" SWING OUTBOARD TURNING ASSEMBLY COMPLETE INCLUDES 20" OUTBOARD BED W/SUPPORT LEG AND OUTBOARD TOOLREST BASE. LATHE INCLUDES 14" TOOL REST, 3" FACEPLATE, SPUR DRIVE, LIVE CENTER, REMOTE ON/OFF SWITCH, SAFETY SHIELD, SPINDLE LOCK, KNOCKOUT ROD, WRENCH AND OPERATION MANUAL. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 3HP, 230VAC, 6.2A, 3PH (REQUIRES 230V, 20A, 1PH CIRCUIT INPUT). SPEED RANGES (3): 0-910, 0-2,000 AND 0-3,500 RPM. INBOARD SWING - 24" (18-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 42". OUTBOARD SWING - 48". HEADSTOCK SHAFT: 1-1/4"-8TPI, #2MT, 5/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 4-1/2" TRAVEL, #2MT, 3/8" BORE, SELF-EJECTING. SPINDLE HEIGHT - 44" W/2" ADJUSTABLE FEET. OVERALL DIMENSIONS - 54-3/4"H X 65"W X 24"D. NET/SHIPPING WTS 848/904 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
POWERMATIC LIVE CENTER - 134-792. ONEWAY STRONGHOLD CHUCK - 959-979. SUPERNOVA2 CHUCK - 961-892. HIGH SPEED STEEL TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA PRECISION MIDI CHUCK
|
| Precision Midi Chuck 1"-8tpi
...plus other(s)
|
THE NOVA PRECISION MIDI CHUCK CHUCK IS THE PERFECT COMPLEMENT TO MIDI AND SMALLER LATHES FOR PROJECTS LIKE PENS, BOXES, ORNAMENTS AND SMALL BOWL TURNING. THIS CHUCK FEATURES FAST ACTION ONE TURN TIGHTENING AND HAS AN AUTOMATIC SAFETY STOP ENSURING THE JAWS DON'T PROTRUDE BEYOND THE CHUCK BODY:
USE WITH NOVA 2" JAWS, PIN JAWS, SPIGOT JAWS AND COLE JAWS (NOT RECOMMENDED FOR USE WITH NOVA 3", 4" AND 5" JAWS, POWERGRIP JAWS, STEP JAWS AND LONG NOSE JAWS). 1"-8TPI SPINDLE THREADS ARE BUILT INTO THE JAWS (DOES NOT USE INSERTS). COMES WITH 2" JAWS, WOODWORM SCREW, LEVER BARS AND INSTRUCTION MANUAL. 3-1/2" DIA. X 2-3/8" DEEP WEIGHS APPROX. 3 LBS. FULLY ASSEMBLED. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
1"-8TPI FITS DELTA (MIDI, 14"), GENERAL (MAXI, 160), GRIZZLY (MIDI, 14"), JET (1014, 1220, 1236, 1442), ONEWAY (1224, 1336), RIKON MIDI, STEEL CITY MIDI, VICMARC 100, WOODTEK (MIDI, 12").
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
NOVA 2" JAW SETS - 136-832. NOVA PIN JAW SET - 136-853. NOVA SPIGOT JAW SETS - 136-841. NOVA COLE JAW SET - 136-850. NOVA MINI COLE JAW SET - 136-856. NOVA SOFT JAW SET - 150-491. NOVA FACEPLATE RINGS - 136-871. NOVA WOODWORM SCREW - 136-880.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA CHUCK INSERTS
|
| 5/8" Plain Insert
...plus other(s)
|
NOVA CHUCK INSERTS ALLOW YOU TO QUICKLY SWITCH FROM ONE LATHE TO ANOTHER. SIMPLY SCREW THE INSERT INTO THE REAR OF THE CHUCK AND IT'S READY TO GO. ALL INSERTS FIT BOTH THE G3 AND SUPERNOVA2 CHUCK:
CHUCK SPANNER WRENCH MAKES REMOVING AND TIGHTENING INSERTS QUICK AND EASY. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA STANDARD JAWS
|
| 1" Jaw Set
...plus other(s)
|
THE TEKNATOOL NOVA STANDARD JAWS HAVE INTERNAL AND EXTERNAL DOVETAIL DESIGN FOR GRIPPING BOWLS, SPIGOTS AND SQUARE STOCK IN COMPRESSION AND EXPANSION MODES:
THE 1" JAW SET IS DESIGNED FOR HOLDING SMALL BOWLS UP TO 6" IN DIAMETER OR SPIGOTS UP TO 5" LONG WHILE THE LARGEST JAW SET CAN HANDLE WORK UP TO 29" IN DIAMETER. PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. NOTE: 3", 4" AND 5" JAW SETS NOT RECOMMENDED FOR USE WITH PRECISION MIDI CHUCK. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA PRECISION MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA SPIGOT JAWS
|
| 1-3/8" Spigot Jaws
...plus other(s)
|
AVAILABLE IN TWO SIZES, NOVA SPIGOT JAWS ARE DESIGNED WITH INTERNAL SERRATIONS TO GRIP STRONGLY IN COMPRESSION MODE. WILL HOLD BOWLS TO 10" DEEP:
WIDE EXTERNAL DOVETAIL FOR POWERFUL EXPANSION HOLDING. PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA STEP JAWS
|
| External Step Jaws
|
DESIGNED FOR COMPRESSION GRIPPING, THE NOVA STEP JAWS HAVE THREE SEPARATE STEPS FOR HOLDING A VARIETY OF SPIGOT SIZES:
ALSO COMES WITH A 3" (75MM) EXPANSION DOVETAIL ON THE OUTER STEP DOUBLING AS A 3" JAW SET. PRECISION MACHINED FROM HIGH QUALITY STEEL. SEE JAW TRAVEL TABLE BELOW FOR MINIMUM AND MAXIMUM HOLDING SPECIFICATIONS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Machinery Accessories - Lathes
|
NOVA COLE JAWS
|
| Cole Jaws
...plus other(s)
|
MADE OF DIE CAST STEEL, NOVA COLE JAWS HAVE STANDARD RUBBER BUTTONS TO HOLD ROUND TURNINGS FOR BOTTOM FINISHING. ALSO USED FOR HOLDING JIGS AND OUT-OF-ROUND OBJECTS:
MINI COLE JAWS FIT LATHES WITH 10" SWINGS AND LARGER. STANDARD COLE JAWS FIT LATHES WITH 12" SWINGS AND LARGER. WOODEN JIGS CAN BE DESIGNED AND USED ON COLE JAWS FOR SPECIALTY FINISHING AND OTHER APPLICATIONS. DIE CAST STEEL. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NOVA MIDI CHUCK - 136-799. NOVA G3 CHUCK - 962-546. SUPERNOVA2 CHUCK - 961-892.
|
|
|
|
Advanced Search Tools
Browse
