|
|
|
Machinery Accessories - Not Listed Elsewhere
|
LASER GUIDE ENSURES PINPOINT ACCURACY
|
| Portable & Miter Saw Laser Guide
...plus other(s)
|
FOR UNPARALLELED ACCURACY, REPLACE THE OUTER SAW BLADE WASHER ON YOUR POWER SAW WITH THE PATENTED LASER GUIDE. WHEN SAW BLADE REACHES 500 RPM, BATTERY-POWERED LASER AUTOMATICALLY SWITCHES ON, SHINING A BRIGHT RED LINE ONTO THE WORK PIECE- NO MORE GUESSING WHERE THE BLADE WILL CUT. DESIGN PREVENTS LASER DAMAGE FROM CUTTING DEBRIS.
MODEL 21369 FITS MOST 5/8 ARBOR 7-1/4, 8, 10, AND 12 CHOP, MITER, SLIDING COMPOUND MITER AND HAND HELD CIRCULAR SAWS. (DOES NOT FIT BOSCH, RIDGID, OR PRO-TECH MITER AND RADIAL ARM SAWS)SOME 12 MITER SAWS WILL NOT ALLOW FLUSH MOUNTING WHEN USING A THIN KERF SAW BLADE-SWITCHING TO A STANDARD 1/8 THICK BODY BLADE SHOULD PREVENT THIS PROBLEM.MODEL 21367 IS DESIGNED FOR RADIAL ARM SAWS.MODEL 21360 FITS LAGER SAWS WITH 1 CENTER HOLE.EACH INCLUDES THREE 1.55V SILVER OXIDE SR44 BATTERIES, EXTRA BATTERIES, 5MM HEX KEY, MOUNTING BOLTS, AND INSTRUCTIONS. CLASS IIIA LASER PRODUCT-AVOID DIRECT EYE EXPOSURE TO LASER BEAM.IMPORTED .DOES NOT FIT DW705
|
|
|
|
Machinery Accessories - Table Saws
|
INCRA® FENCED MITER GAUGES
|
| Incra Miter 1000
...plus other(s)
|
INCRA® MITER GAUGES HAVE LASER-CUT STOPS FOR PRECISION ACCURACY AND ADJUSTABLE EXPANSION DISKS IN THE MITER BAR FOR ZERO SIDE PLAY AND ANTI-FRICTION TRAVEL ALONG THE MITER SLOT. MODELS ARE AVAILABLE IN DIFFERENT ANGLE RANGES AND FIXED INCREMENTS AND INCLUDE FENCES AND FENCE STOPS. STANDARD CUT-OFF FENCES COME WITH A PRECISION SHOPSTOP THAT HAS 1/32" FIXED STEPS. FLIP FENCES COME WITH A FLIP SHOPSTOP, A DUAL PIVOTING ARM STOP FOR MULTIPLE-CUT LENGTH SETUPS. TELESCOPING FLIP FENCES ADD VERSATILITY FOR HOLDING LONGER WORK. FENCES ARE INTERCHANGEABLE WITH ALL INCRA® MITER GAUGES AND ARE AVAILABLE SEPARATELY TO UPGRADE OR MODIFY EXISTING MITER GAUGES. COMPLETE INSTRUCTIONS INCLUDED:
MITER 1000 HAS 5° FIXED INCREMENTS WITH A 1/4° MICRO-ADJUST OVER A 180° ANGLE RANGE. COMES WITH 18" INCRA TRACK FENCE AND SLIDING STOP POSITIONER.
MITER 1000SE HAS 5° FIXED INCREMENTS WITH A 1/10° MICRO-ADJUST OVER A 180° ANGLE RANGE. COMES WITH 18" TO 31" TELESCOPING FLIP FENCE.
MITER 2000 HAS 1° FIXED INCREMENTS OVER A REVERSIBLE 55° ANGLE RANGE. COMES WITH A 27" CUT-OFF SHOPSTOP FENCE.
MITER 3000 HAS 5°, 1° AND 1/2° FIXED INCREMENTS OVER A 180° ANGLE RANGE. COMES WITH 27" FLIP FENCE. INCRA CALLS THIS THEIR "MOST FEATURE RICH MITER GAUGE".
MITER 3000SE HAS 5°, 1° AND 1/2° FIXED INCREMENTS OVER A 180° ANGLE RANGE. COMES WITH 27" TO 49" TELESCOPING FLIP FENCE.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
INCRA V27 MITER GAUGE - 123-173. INCRA V120 MITER GAUGE - 155-324. INCRA 5000 MITER TABLE - 107-873.
|
|
|
|
Machinery Accessories - Table Saws
|
INCRA® MITER 5000
|
| Incra Miter 5000
|
THE INCRA® 5000 BLENDS THE INCREMENTAL ANGLE CONTROL FEATURES OF THE PRECISION MITER 3000 MITER GAUGE WITH A SPECIAL LAMINATED SLIDING TABLE SLED FOR THE ULTIMATE MITER CUTTING TABLE SAW WORKSTATION. USA.
THE MITER 3000 MITER GAUGE FEATURES:
ANGLELOCK INDEXING SYSTEM THAT PROVIDES LASER CUT POSITIVE STOPS AT 1/2° INCREMENTS OVER A FULL 180° RANGE WITH CONTINUOUS MICRO-ADJUST BETWEEN STOPS. 36" INCRALOCK™ FLIP FENCE THAT TELESCOPES TO 64". GLIDELOCK MITER BAR WITH 10 EXPANSION POINTS THAT ADJUSTS THE MITER BAR FOR ZERO SIDE PLAY AND ANTI-FRICTION TRAVEL ALONG THE MITER SLOT. DUAL ARM FLIP SHOPSTOP POSITIONER FOR REPEATABLE ACCURACY.
THE SLIDING TABLE FEATURES:
THREE LAMINATED MDF PANELS WITH TWO EMBEDDED ALUMINUM T-TRACKS FOR SECURING THE WORKPIECE HOLD DOWN CLAMP. FENCE LOCKDOWN CLAMP FOR ROCK SOLID SUPPORT. RENEWABLE OUTSIDE PANEL PROVIDING ZERO CLEARANCE TEAR-OUT CONTROL AND CUT-OFF SUPPORT - WORKS ON BOTH SIDES OF THE BLADE. 33-1/2" WIDE X 23-1/2" X 1/2" THICK TABLE.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
INCRA FENCED MITER GAUGES - 104-750.
|
|
|
|
Machinery - Mitersaws
|
BOSCH MODEL 4212L 12" DUAL BEVEL COMPOUND MITERSAW
|
| 12" Dual-bevel Compound Miter Saw
...plus other(s)
|
DUAL BEVEL CAPACITY MAKE LEFT AND RIGHT CORNERS EASY WHILE UPFRONT CONTROLS ON THESE BOSCH COMPOUND MITER SAWS RESULT IN QUICK AND ACCURATE SETTINGS:
5412 12" DUAL BEVEL SLIDE MITER SAW - 3,800 RPM; 1" ARBOR: 25-1/2" ALUMINUM BASE HAS BUILT-IN EXTENSION FOR UP TO 40" TOTAL LENGTH - 4-1/2" TALL SLIDING FENCE. 20" HIGH. 59 LBS. NET WEIGHT; 65 LBS. SHIPPING WEIGHT.
4410 10" DUAL BEVEL SLIDE MITER SAW - 4,800 RPM; 5/8" ARBOR: 21" ALUMINUM BASE REACHES 37-1/4" WITH BUILT-IN EXTENSION 4" TALL SLIDING FENCE. 19" HIGH. 55 LBS. NET WEIGHT; 58 LBS. SHIPPING WEIGHT.
4212 12" DUAL BEVEL COMPOUND MITER SAW - 3,800 RPM; 1" ARBOR: 31.6° MITER AND 33.9° CROWN MOLDING BEVEL DETENT SETTINGS FOR QUICK, ACCURATE CROWN CUTS. BUILT-IN LENGTH STOP FOR REPETITIVE CUTS. 25-1/2" ALUMINUM BASE CAN REACH TO 40" WITH BUILT-IN EXTENSION - 4-1/2" TALL SLIDING FENCE. 20" HIGH. 55 LBS. NET WEIGHT; 60 LBS. SHIPPING WEIGHT.
120V, 15A, 1PH MOTORS. 47° LEFT/47° RIGHT BEVEL RANGE. 52° LEFT/60° RIGHT MITER RANGE. SPINDLE LOCK FOR BLADE CHANGES AND ELECTRIC BRAKE. MULTI-POSITION MAIN HANDLE LOCKS INTO ANY OF FOUR POSITIONS. DUST BAG, CARBIDE TIPPED BLADE, WRENCH SET, AND INSTRUCTIONS INCLUDED. ONE YEAR MANUFACTURERS WARRANTY. IMPORTED.
|
|
|
|
Machinery - Mitersaws
|
DEWALT® 12" DOUBLE BEVEL COMPOUND MITER SAW
|
| Dw716 12" Dual Bevel Com Mitersaw
...plus other(s)
|
THE DEWALT® DW716 MITER SAW FEATURES A POWERFUL 120VAC, 15A, 3,600 RPM MOTOR TO PROVIDE FAST, ACCURATE CUTTING - 5/8" OR 1" ARBOR:
BEVELS 0-48°, LEFT AND RIGHT, WITH POSITIVE STOPS AT 0°, 33.9°, 45° AND 48°. 6-1/2" VERTICAL BASEBOARD CAPACITY; 8" HORIZONTAL. EXCLUSIVE BACK FENCE DESIGN ALLOWS CUTTING 2 X 10 LUMBER AT 90°; 2 X 8 AT 45°. TALL, SLIDING FENCE SUPPORTS CROWN AND BASE MOLDING WHILE EASILY SLIDING OUT OF THE WAY FOR BEVEL CUTS. ADJUSTABLE STAINLESS STEEL MITER DETENT PLATE HAS 11 POSITIVE STOPS FOR REPEATABLE ACCURACY. PRECISE MITER SYSTEM AND MACHINED BASE FENCE SUPPORT DELIVER INCREASED CUTTING ACCURACY. BUILT IN HANDLE, CARBIDE SAWBLADE, DUST BAG, BLADE WRENCH AND INSTRUCTIONS INCLUDED. WEIGHS 44 LBS. DW7187 ADJUSTABLE MITER SAW LASER SYSTEM (SOLD SEPARATELY) DELIVERS ACCURATE VISIBILITY TO THE CUT LINE. ON/OFF SWITCH ALLOWS OPERATION WITH OR WITHOUT BLADE SPINNING. POWERED BY THE SAW - NO BATTERIES NECESSARY! 124-619 - OPTIONAL DW723 MITER SAW STAND EXTENDS TO SUPPORT UP TO 16' OF MATERIAL AND UP TO 400 LBS. LIGHTWEIGHT ALUMINUM CONSTRUCTION (35 LBS.) WITH FOLDING LEGS FOR EASY STORAGE. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Mitersaws
|
DEWALT® 12" DOUBLE BEVEL SLIDING COMPOUND MITER SAW
|
| Dw718 12" Sliding Compound Mitersw
...plus other(s)
|
THE DEWALT® DW718 MITER SAW FEATURES A POWERFUL 120VAC, 15A, 3,400 RPM MOTOR TO PROVIDE FAST, ACCURATE CUTTING - 5/8" OR 1" ARBOR:
BEVELS 0-48°, LEFT AND RIGHT, WITH POSITIVE STOPS AT 0°, 22.5°, 33.85° AND 45°. MITERS 60°, LEFT, AND 50°, RIGHT. 6-1/2" VERTICAL BASEBOARD CAPACITY; 16" HORIZONTAL. EXCLUSIVE BACK FENCE DESIGN ALLOWS CUTTING 1 X 16 LUMBER AT 90°; 1 X 12 AT 45°. TALL, SLIDING FENCE SUPPORTS CROWN AND BASE MOLDING WHILE EASILY SLIDING OUT OF THE WAY FOR BEVEL CUTS. ADJUSTABLE STAINLESS STEEL MITER DETENT PLATE HAS 10 POSITIVE STOPS FOR REPEATABLE ACCURACY. PRECISE MITER SYSTEM AND MACHINED BASE FENCE SUPPORT DELIVER INCREASED CUTTING ACCURACY. BUILT IN HANDLE, CARBIDE SAWBLADE, DUST BAG, BLADE WRENCH AND INSTRUCTIONS INCLUDED. WEIGHS 53 LBS. 143-081 - DW7187 ADJUSTABLE MITER SAW LASER SYSTEM (SOLD SEPARATELY) DELIVERS ACCURATE VISIBILITY TO THE CUT LINE. ON/OFF SWITCH ALLOWS OPERATION WITH OR WITHOUT BLADE SPINNING. POWERED BY THE SAW - NO BATTERIES NECESSARY! OPTIONAL DW723 MITER SAW STAND EXTENDS TO SUPPORT UP TO 16' OF MATERIAL AND UP TO 400 LBS. LIGHTWEIGHT ALUMINUM CONSTRUCTION (35 LBS.) WITH FOLDING LEGS FOR EASY STORAGE. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Mitersaws
|
NEW MAKITA® 10" DUAL SLIDE COMPOUND MITER SAW INCLUDES BUILT IN LASER
|
| 10" Dual Slide Miter Saw W/laser
|
THE MAKITA® MODEL LS1013L 10" DUAL SLIDE COMPOUND MITER SAW ALSO FEATURES AN INDEPENDENT SWITCH, WHICH ALLOWS THE LASER TO BE SEEN WITH OR WITHOUT THE BLADE ROTATING - A GREAT ADVANTAGE WHEN SETTING UP CUTS:
POWERFUL 120VAC, 13A MOTOR PRODUCES 3,700 RPM - 5/8" ARBOR. SOFT START FEATURE AND ELECTRONIC SPEED CONTROL FOR CONSTANT SPEED UNDER LOAD. DUAL STEEL RAILS WITH LINEAR BALL BEARINGS ENSURE STABLE, ACCURATE CUTS. MITERS UP TO 52°, RIGHT, WITH POSITIVE STOPS AT 15°, 22.5°, 30°, 45°, RIGHT OR LEFT, AND 0° (ADDITIONAL POSITIVE STOP AT 33.9°, LEFT). CUTS A 3-5/8" X 12" AT 0° AND 2" X 8-3/4" AT 45°. INCLUDES 64T CARBIDE TIPPED SAWBLADE, VERTICAL VISE, TWO EXTENSION WINGS, DUST BAG, SOCKET WRENCH AND TRIANGULAR RULE. 20-1/2"H X 28-1/8"W X 25-1/4"D; WEIGHS 48-1/2 LBS. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Mitersaws
|
NEW MAKITA® 12" DUAL SLIDE COMPOUND MITER SAW INCLUDES BUILT IN LASER
|
| 12" Dual Slide Miter Saw W/laser
|
THE MAKITA® LS1214L 12" DUAL SLIDE COMPOUND MITER SAW ALSO FEATURES AN INDEPENDENT SWITCH, WHICH ALLOWS THE LASER TO BE SEEN WITH OR WITHOUT THE BLADE ROTATING - A GREAT ADVANTAGE WHEN SETTING UP CUTS:
3,200 RPM, 120VAC, 15A MOTOR - 1" ARBOR. ELECTRONIC SPEED CONTROL FOR SMOOTH STARTS AND STEADY CUTTING. MITERS UP TO 52°, RIGHT, WITH POSITIVE STOPS AT 15°, 22.5°, 30°, 45°, RIGHT OR LEFT, AND 0° (ADDITIONAL POSITIVE STOP AT 33.9°, LEFT). 4-1/2" X 12-1/8" CROSSCUTTING CAPACITY AT 90°; 2-5/8" X 8-1/2" AT 45°. PIVOTING FENCE SUPPORTS MATERIALS FOR MITER CUTS, YET EASILY PIVOTS OUT OF THE WAY FOR BEVEL OR COMPOUND CUTTING. DUAL STEEL RAILS WITH DUAL LINEAR BALL BEARINGS FOR SMOOTH AND ACCURATE CUTTING. INCLUDES TWO EXTENSION WINGS, RIGHT SUB-FENCE, 70T CARBIDE TIPPED BLADE, VERTICAL VISE, SOCKET WRENCH, DUST BAG AND TRIANGULAR RULE. 27-1/4"H X 28-1/2"W X 20-1/2"D. WEIGHS 52.9 LBS. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Mitersaws
|
THE DEWALT® 10" DW717 DELIVERS THE CAPACITY AND VERSATILITY OF A 12" MITER SAW IN A SMALLER PACKAGE.
|
| 10" Dual Bevel Sliding Miter Saw
...plus other(s)
|
FEATURES THE EXCLUSIVE BEVEL DETENT SYSTEM WITH 7 POSITIVE STOPS AND A MITER DETENT PLATE WITH 11 POSITIVE STOPS FOR ACCURATE REPEATABLE CUTS. MACHINED BASE FENCE INSURES PERPENDICULARITY WITH BLADE. EXTRA TALL SLIDING FENCE SUPPORTS BASE MOLDING UP TO 6" LEFT OF THE BLADE AND 3-1/2" TO THE RIGHT. BEST-IN-CLASS 12" CROSS CUTTING CAPACITY AT 45°. 4-1/4" VERTICAL X 14" HORIZONTAL CAPACITIES. BEVELS 0-48° LEFT AND RIGHT. MITER CAPACITIES RANGE FROM 60° LEFT TO 52° RIGHT. DURABLY DESIGNED FOR PORTABILITY WEIGHING ONLY 48 LBS WITH BUILT-IN CARRY HANDLE. 15A, 4000 RPM MOTOR WITH A 5/8" ARBOR. COMPATIBLE WITH TABLE SAW BLADES. INCLUDES CARBIDE BLADE, DUST BAG, BLADE WRENCHES AND INSTRUCTIONS. THREE YEAR LIMITED MANUFACTURER'S WARRANTY. IMPORTED.
COMPATIBLE WITH THE 7187 ADJUSTABLE MITER SAW LASER SYSTEM (SOLD SEPARATELY) WHICH DELIVERS ACCURATE VISIBILITY TO THE CUT LINE WITH NO BATTERIES REQUIRED SINCE IT'S POWERED BY THE SAW.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
DEWALT® ADJUSTABLE MITER SAW LASER SYSTEM DOESN'T NEED BATTERIES
|
| Dw7187 Mitersaw Laser Kit
|
POWERED BY THE SAW - NOT BATTERIES - THE DEWALT® DW7187 ADJUSTABLE MITER SAW LASER SYSTEM ALSO HAS AN ON/OFF SWITCH THAT ALLOWS THE LASER TO OPERATE WITH OR WITHOUT THE BLADE SPINNING:
BRIGHT LASER LINE DELIVERS ENHANCED VISIBILITY IN LOW AND HIGH LIGHT CONDITIONS. PROTECTED LASER DIODE IN OPTIMUM LOCATION DELIVERS LONG TERM DURABILITY WHILE KEEPING THE DIODE CLEAR AND VISIBLE. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.