|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® SPRING LOADED HINGES HOLD CABINET DOORS OPEN OR CLOSED
|
| Self-closing Hinge 3/8" Inset
|
AMEROCK® SPRING LOADED HINGES PROVIDE MAXIMUM VERSATILITY:
DESIGNED FOR 3/8" INSET DOORS (RABBETED EDGE). SPRUNG TO CLOSE DOORS OR HOLD DOORS OPEN AT 35°. ANTIQUE ENGLISH FINISH; FELT BUMPERS AND SCREWS INCLUDED. HINGES MEET OR EXCEED KMCA STANDARDS. SOLD IN PAIRS.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Hinges - Cabinet
|
CAST FACE FRAME ADAPTERS GIVE A CLEAN LOOK TO BLUM® HINGES
|
| 6mm Cast Ff Adapter For Inserta
...plus other(s)
|
DIE CAST ZINC ADAPTERS MATCH THE FINISH OF BLUM® CLIPTOP™ HINGES:
OFFSET STYLES FOR ALL FACE FRAME OVERLAY APPLICATIONS USING INSERTA™. 3MM HEIGHT CENTER MOUNT FOR USE WITH ALL OTHER CLIPTOP™ HINGES. ALL FEATURE SCREW-ON MOUNTING. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Cabinet
|
A NEW FINISH FOR TRADITIONAL CABINET HINGES
|
| S/c 3/8" Inset Hinge-orb
...plus other(s)
|
FOR 3/8 INSET DOORS OR FLUSH OVERLAY APPLICATIONS, AMEROCK® CABINET HINGES ARE NOW AVAILABLE WITH AN OIL RUBBED BRONZE FINISH:
SELF CLOSING ACTION - MEET OR EXCEED KCMA STANDARDS. SCREWS AND FELT BUMPERS INCLUDED. SOLD IN PAIRS.
|
|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® SPRING LOADED HINGES HOLD CABINET DOORS OPEN OR CLOSED
|
| Overlay Facemount Sc Hinge
...plus other(s)
|
AMEROCK® SPRING-LOADED HINGES ARE AVAILABLE IN TWO STYLES AND FOUR FINISHES TO PROVIDE MAXIMUM VERSATILITY:
INSET HINGES ARE DESIGNED FOR 3/8" INSET DOORS (RABBETED EDGE) WHILE VARIABLE OVERLAY HINGES ACCOMMODATE FULL OVERLAY DOORS. SPRING-LOADED TO CLOSE OR HOLD DOORS OPEN AT 35°. HINGES MEET OR EXCEED KMCA STANDARDS. SOLD IN PAIRS AND BULK BOXES WITH FELT BUMPERS AND MOUNTING SCREWS INCLUDED.
|
|
|
|
Hardware Hinges - Cabinet
|
SELF CLOSING PARTIAL WRAP HINGES ALLOW EASY ADJUSTMENT
|
| 3/8" Inset Part-wrap Hinge-bb
...plus other(s)
|
TWO SLOTS IN THE FRAME WING MAKE IT POSSIBLE TO ADJUST SPRING-LOADED PARTIAL WRAP HINGES 3/16" AFTER INSTALLATION:
INSET AND OVERLAY STYLES - DESIGNED TO MEET OR EXCEED KCMA STANDARDS. EXPOSED PORTION MEASURES 1-13/16" X 1/2" (MOUNTING SCREWS INCLUDED). BURNISHED BRASS FINISH EXCEPT FOR 905-620 AND 905-627 WHICH ARE POLISHED BRASS FINISH SOLD IN PAIRS.
|
|
|
|
Hardware Hinges - Cabinet
|
MARATHON® SELF CLOSING KNIFE HINGES PERFORM BETTER, LAST LONGER
|
| 1/4" Overly Burn Brass
...plus other(s)
|
MARATHON® SELF CLOSING KNIFE HINGES INCORPORATE SELF LUBRICATING, SPACE AGE POLYMER FOR FLEXIBILITY AND ENDURANCE - PERFORMANCE IS 10X GREATER THAN KCMA CERTIFICATION STANDARDS:
HIGH STRENGTH STEEL FRAME, FULL 180° OPENING, LOCATING TABS FOR QUICK POSITIONING AND ±1/16" VERTICAL AND HORIZONTAL ADJUSTMENT. INSTALL INTO 9/32" WIDE DADO CUT (SCREWS, PADS AND INSTRUCTIONS INCLUDED). THREE FINISHES TO SELECT FROM - SAVE WHEN YOU BUY IN BULK!
|
|
|
|
Hardware Hinges - Cabinet
|
CLEARANCE PRICED AMEROCK® SYSTEM 2000™ CONCEALED HINGES FOR FACE FRAME APPLICATIONS
|
| Bb 1/4" Ovrly Full Wrap Plate
...plus other(s)
|
|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® NON-MORTISE HINGES ALLOW A CLOSE FIT ON INSET DOORS
|
| Fw Nm Hinge Minaret-sb
...plus other(s)
|
AMEROCK® FULL INSET, NON-MORTISE HINGES PROVIDE A CLOSE-FITTING (1/16" GAP) DECORATIVE LOOK ON TRADITIONAL, INSET STYLE DOORS WITHOUT MORTISING:
DESIGNED FOR USE ON 3/4" THICK STOCK, SLOTTED HOLES ALLOW EASY ADJUSTMENT FOR A PERFECT FIT; HORIZONTAL AND VERTICAL ADJUSTMENTS ARE EASY TO MAKE. USE FULL WRAP FOR FACE FRAME CABINETS AND PARTIAL WRAP FOR FRAMELESS OR FACE FRAME CABINETS. EXCEED KCMA AND BHMA STANDARDS FOR STRENGTH, QUALITY OF FINISH AND ENDURANCE. STEEL IN A VARIETY OF FINISHES OR SOLID BRASS (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® NON-MORTISE HINGES ALLOW A CLOSE FIT ON INSET DOORS
|
| Fw Nm Hinge Ball Tip-orb
...plus other(s)
|
AMEROCK® FULL INSET, NON-MORTISE HINGES PROVIDE A CLOSE-FITTING (1/16" GAP) DECORATIVE LOOK ON TRADITIONAL, INSET STYLE DOORS WITHOUT MORTISING:
DESIGNED FOR USE ON 3/4" THICK STOCK, SLOTTED HOLES ALLOW EASY ADJUSTMENT FOR A PERFECT FIT; HORIZONTAL AND VERTICAL ADJUSTMENTS ARE EASY TO MAKE. USE FULL WRAP FOR FACE FRAME CABINETS AND PARTIAL WRAP FOR FRAMELESS OR FACE FRAME CABINETS. EXCEED KCMA AND BHMA STANDARDS FOR STRENGTH, QUALITY OF FINISH AND ENDURANCE. STEEL IN A VARIETY OF FINISHES OR SOLID BRASS (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Cabinet
|
SET - 13/16""DULL CHROME
|
| Set - 13/16" Dull Chrome
...plus other(s)
|
|
FULL WRAP DESIGN ANCHORS INTO CABINET FRAME WITH FOUR SCREWS (SCREWS INCLUDED). FIVE KNUCKLE HINGE IS 2-3/4" TALL. 0.09" THICK STEEL. HOLES ARE DRILLED TO FIT 32MM SYSTEM AND SLOTTED FOR VERTICAL ADJUSTMENT. TWO SIZES AVAILABLE IN DULL CHROME, SATIN BLACK OR POWDER COAT GRAY FINISHES.
|
|
|
|
Hardware Hinges - Cabinet
|
CONCEALED HINGES AND MOUNTING PLATES FOR FRAMELESS OVERLAY CONSTRUCTION
|
| 3mm Baseplate W/expanding Dowels
...plus other(s)
|
|
|
|
Hardware Hinges - Cabinet
|
SURFACE MOUNT CONCEALED HINGE FOR FACE FRAMES
|
| Fce Mnt Hng For 5/8" Mat
...plus other(s)
|
FACE FRAME HINGES USING A 35MM CUP HOLE ARE VERY POPULAR BUT CAN BE TRICKY - TOOLING AND SET UP MIGHT NOT BE COST JUSTIFIABLE FOR SMALL JOBS:
HOWEVER, THESE CONCEALED FACE MOUNT HINGES ARE COMPATIBLE WITH THIS POPULAR CABINET CONSTRUCTION TECHNIQUE AND ARE QUICK AND EASY TO INSTALL. A PAIR OF HINGES WILL SUPPORT A 30 LB. DOOR AND OPEN TO 90°. OVAL SLOTS ALLOW FOR TWO-WAY ADJUSTMENT. NICKEL PLATED STEEL WITH SELF CLOSING MECHANISM. FOR MATERIAL 5/8" OR 3/4" THICK (SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Cabinet
|
DUPLEX HINGES
|
| Two Pair Duplex Hinges-brass
...plus other(s)
|
|
|
|
Hardware Hinges - Cabinet
|
STANLEY® PIVOT HINGES FOR OVERLAY CABINET DOORS
|
| 332 Primer Coat Cabinet Hinge
...plus other(s)
|
|
#331 HINGE IS DESIGNED FOR CABINET DOORS THAT COMPLETELY OVERLAP THE CABINET FRONT, BUT NO VERTICAL STILE IS REQUIRED FOR MOUNTING. #332 IS ALSO FOR CABINET DOORS THAT COMPLETELY OVERLAP THE CABINET FRONT, BUT NO HORIZONTAL RAIL IS REQUIRED FOR MOUNTING. HINGES MOUNT TO THE TOP AND BOTTOM OF THE DOOR PANEL AND TO THE CABINET FACE FRAME. STEEL HINGES WITH BRIGHT BRASS, BRONZE, CHROME OR PAINT-READY PRIMER GRAY FINISH. MOUNTING SCREWS AND INSTRUCTIONS ARE INCLUDED. MADE IN USA. LIMITED TO QUANTITY ON HAND.
|
|
|
|
Hardware Hinges - Cabinet
|
THESE AMEROCK® PIVOT HINGES HANDLE SLAB STYLE CABINET DOORS WITH EASE
|
| Pivot Hinge-burn Brass
|
|
SIMPLE SURFACE MOUNT INSTALLATION. WORK WITH SLAB STYLE (SQUARE EDGE) DOORS. STEEL WITH BURNISHED BRASS FINISH, PACKED ONE PAIR PER BAG WITH MOUNTING SCREWS INCLUDED.
|
|
|
|
Hardware Hinges - Concealed
|
MATRIX™ CONCEALED FRAME HINGES COMBINE STRENGTH AND AFFORDABILITY IN AN AMAZINGLY SMALL PROFILE
|
| Matrix 3-way Adj Ff Hinge 1/2"o/l
|
FROM AMEROCK®, MATRIX™ CONCEALED FRAME HINGES FEATURE ±1/16" UP AND DOWN, ±1/16" SIDE TO SIDE AND ±1/8" OUT AND IN ADJUSTMENTS FOR A PRECISE FIT:
ADJUSTS WITH A TURN OF A SCREWDRIVER; ONE ADJUSTMENT DOES NOT AFFECT OTHER DIMENSIONS. 1/2" OVERLAY; BLUM® DOWELED PATTERN; STAY OPEN FEATURE. 105° OPENING ANGLE; 7/16" PROTRUSION INTO CABINET OPENING ALLOWS CLEARANCE FOR MOST DRAWER SLIDES WITHOUT USE OF ADDITIONAL SPACERS. ALL STEEL CONSTRUCTION; EXCEEDS BHMA GRADE 2 AND KCMA REQUIREMENTS. LIFETIME MANUFACTURER'S WARRANTY.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE 94° AND 110° HINGES FOR FACE FRAME APPLICATIONS
|
| 94deg (200) F/o Hinge Screw-on 0mm
...plus other(s)
|
NICKEL PLATED STEEL, SALICE 94° AND 110° OVERLAY FACE FRAME HINGES HAVE CUP DEPTHS OF ONLY 11MM, ALLOWING USE IN DOORS UNDER 3/4" THICK:
HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). COMPATIBLE WITH ALL DOMI® STAMPED STEEL OR DIE CAST ZINC ALLOY MOUNTING PLATES. TAB SETTINGS CAN BE FROM 3MM TO 6MM. CHOOSE FROM SCREW-ON, PRESS-IN (WITH 8MM DOWELS); RAPIDO™ (CAM SCREW) OR LOGICA™(TOOL-FREE) HINGE CUP MOUNTING STYLES. SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). TRIAL MOCKUP RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST: #6 X 5/8 SCREWS - 828-558. NOTE: HINGES FOR 120° AND 165° OPENING ANGLES ARE AVAILABLE AT 131-246.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE CONCEALED HINGES FOR FRAMELESS OVERLAY CONSTRUCTION FEATURE SIX WAY INDEPENDENT ADJUSTMENT
|
| 94deg (200)h/o Hinge Screw-on 9mm
...plus other(s)
|
NICKEL PLATED STEEL, SALICE 94°, 110°, 120° OR 165° CONCEALED HINGES HAVE CUP DEPTHS OF ONLY 11MM, ALLOWING USE IN DOORS UNDER 3/4" THICK:
HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). COMPATIBLE WITH ALL DOMI® STAMPED STEEL OR DIE CAST ZINC ALLOY MOUNTING PLATES. 3MM TO 6MM TAB SETTINGS. CHOOSE FROM SCREW-ON, PRESS-IN (WITH 8MM DOWELS); RAPIDO™(CAM SCREW) OR LOGICA™(TOOL-FREE) HINGE CUP MOUNTING STYLES. SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). ALL APPLICATIONS REQUIRE A HINGE BODY AND A MOUNTING PLATE (EACH SOLD SEPARATELY.) TRIAL MOCKUP RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE INSET PANEL CONSTRUCTION HINGES
|
| 94deg (200)inset Hng Screw-on 17mm
...plus other(s)
|
NICKEL PLATED STEEL, SALICE 94°, 110° OR 165° INSET PANEL CONSTRUCTION HINGES HAVE CUP DEPTHS OF ONLY 11MM, ALLOWING USE IN DOORS UNDER 3/4" THICK:
SIX WAY INDEPENDENT ADJUSTMENT. HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). COMPATIBLE WITH ALL DOMI® STAMPED STEEL OR DIE CAST ZINC ALLOY MOUNTING PLATES. 3MM TO 6MM TAB (K) SETTINGS. SELECT FROM SCREW-ON, PRESS-IN, CAM-SCREW OR TOOL FREE-MOUNTING (SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). TRIAL MOCKUP RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE HINGES PROVIDE PERFORMANCE AND DURABILITY FOR FACE FRAME CABINETS
|
| 110d (200)f/o Hinge Screw-on 0mm
...plus other(s)
|
THESE NICKEL PLATED STEEL SALICE HINGES HAVE CUP DEPTHS OF ONLY 11MM - SNAP ON MOUNTING OF HINGES TO BASEPLATES REQUIRES NO TOOLS:
SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. FACE FRAME PLATES HAVE CAM DEPTH ADJUSTMENT AND INDEXING TABS TO ALIGN THEM WITH THE FACES FRAME FOR EASY AND ACCURATE MOUNTING. FIT STANDARD BLUM® BORING PATTERN. 11MM DEEP CUPS ALLOW USE IN DOORS UNDER 19MM (3/4"). 4MM TAB (K) SETTING RECOMMENDED FOR ALL OVERLAYS. CHOOSE FROM SCREW-ON, PRESS-IN (WITH 8MM DOWELS); RAPIDO™ (CAM SCREW) OR LOGICA™(TOOL-FREE) HINGE CUP MOUNTING STYLES. SCREW-ON CUPS AND MOUNTING PLATES REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). LIFETIME WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
SELF CLOSING SALICE INSET FACE FRAME HINGES FEATURE SIX WAY ADJUSTMENT
|
| 110d (200) 1/2"ol Hng Screw-on 5mm
...plus other(s)
|
NICKEL PLATED STEEL, SALICE INSET FACE FRAME HINGES HAVE 11MM CUPS, ALLOWING USE IN DOORS UNDER 3/4" THICK:
SELECT FROM SCREW-ON, PRESS-IN, CAM-SCREW (RAPIDO™) OR TOOL-FREE (LOGICA™) MOUNTING STYLES. HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY TO HINGES. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). SCREW ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). LIFETIME WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE CONCEALED HINGES FOR FRAMELESS CONSTRUCTION FEATURE SIX WAY INDEPENDENT ADJUSTMENT
|
| 110d (200)h/o Hinge Screw-on 9mm
...plus other(s)
|
SELF CLOSING SALICE FRAMELESS CONSTRUCTION CONCEALED HINGES FEATURE SNAP ON MOUNTING OF HINGES TO BASE PLATES - 20 LBS. PER PAIR LOAD CAPACITIES:
EXTENDED CUP FLANGES ADD STABILITY - FIT STANDARD BLUM® BORING PATTERN. 11MM DEEP CUPS ALLOW USE IN DOORS UNDER 19MM (3/4"). COMPATIBLE WITH ALL STYLES OF DOMI™ STEEL OR DIE CAST ZINC MOUNTING PLATES. HINGE GEOMETRY IS SIMILAR ALLOWING USE OF A 4MM TAB (K) SETTING FOR NEARLY ALL APPLICATIONS. CHOOSE FROM SCREW-ON, PRESS-IN (WITH 8MM DOWELS); RAPIDO™ (CAM SCREW) OR LOGICA™(TOOL-FREE) HINGE CUP MOUNTING STYLES. ALL SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). LIFETIME WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8" SCREWS - 828-558.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE 120° AND 165° HINGES FOR FACE FRAME APPLICATIONS
|
| 120d (200)f/o Hinge Screw-on 0mm
...plus other(s)
|
NICKEL PLATED STEEL, SALICE 110° AND 165° OVERLAY FACE FRAME HINGES HAVE CUP DEPTHS OF ONLY 11MM, ALLOWING USE IN DOORS UNDER 3/4" THICK:
HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). COMPATIBLE WITH ALL DOMI® STAMPED STEEL OR DIE CAST ZINC ALLOY MOUNTING PLATES. 3MM TO 6MM TAB SETTINGS. CHOOSE FROM SCREW-ON, PRESS-IN (WITH 8MM DOWELS); RAPIDO™ (CAM SCREW) OR LOGICA™(TOOL-FREE) HINGE CUP MOUNTING STYLES. SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). TRIAL MOCKUP RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
NOTE: HINGES FOR 94° AND 110° OPENING ANGLES ARE AVAILABLE AT . TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST: 858-228 - #6X5/8" NICKEL PLATED SCREWS - HREF="HTTP://WOODWORKER.COM/CGI-BIN/FULLPRES.EXE?PARTNUM=858-228"> CLICK HERE.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE HINGES OFFER SOLUTIONS FOR DIFFICULT CORNER ANGLES
|
| -30d Corner (200) Hinge Press-in
...plus other(s)
|
NICKEL PLATED STEEL SALICE SPECIAL ANGLE HINGES ONLY REQUIRE A 4MM TAB (K):
90° OPENING ANGLE; 35MM DIA. CUP (BLUM® BORING PATTERN) WITH 11MM CUP DEPTH. PRESS-IN MOUNTING (REMOVE DOWELS FOR SCREW-ON MOUNTING) - USE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). COMPATIBLE WITH ALL DOMI® MOUNTING PLATES. LIFETIME MANUFACTURER'S WARRANTY. ITALY. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 SCREWS - 828-558.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE BI-FOLD HINGES PROVIDE EASY ACCESS TO LAZY SUSANS
|
| Pie Cut (bi-fold) Cnr Hng Press-in
...plus other(s)
|
SELF CLOSING SALICE PIE CUT CORNER HINGES FEATURE SIX WAY INDEPDENT ADJUSTMENT - HINGES SNAP ON TO MOUNTING PLATES:
35MM CUP DIA. - INSTALL IN BLUM® BORING PATTERN - ONLY REQUIRE A 4MM TAB (K). COMBINE BI-FOLD (PIE CORNER) HINGE WITH 165° HINGES ON THE CABINET FOR BEST ACCESS TO PIE CUT LAZY SUSANS. REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). TRIAL MOCK-UP IS RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
RUGGED SALICE HINGES ALLOW YOU NEARLY LIMITLESS CABINET DOOR DESIGN OPTIONS
|
| 110d 7-pin Series B Hinge Screw-on
...plus other(s)
|
SEVEN PIN ARTICULATION LETS THIS SALICE HINGE WORK WITH PARTIAL INSERT, MITERED CORNER, LONG OVERLAY OR MOLDED EDGE DOORS UP TO 26MM THICK:
TAB (K) CAN RANGE FROM 3MM TO 18MM ON SQUARE EDGE DRAWERS; UP TO 23MM ON MOLDED EDGE DOORS. SELF CLOSING HINGE WITH 110° OPENING ANGLE, 35MM SCREW-ON CUP (BLUM® BORING PATTERN) AND ONLY 9MM CUP DEPTH - REQUIRES #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). SNAP ON ATTACHMENT OF HINGES TO MOUNTING PLATES. COMPATIBLE WITH ALL DOMI® STAMPED STEEL AND DIE CAST ZINC ALLOY MOUNTING PLATES. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE CONCEALED HINGES HANDLE THICK, HEAVY DOORS
|
| 94d 40mm F/o (f) Hinge Screw-on
...plus other(s)
|
THESE SALICE CONCEALED HINGES ARE THE HINGES OF CHOICE FOR POCKET DOOR APPLICATIONS:
LARGER 40MM DIA. CUP WITH 52MM SCREW SPACING WILL HANDLE INSET DOORS UP TO 1-1/2" (40MM) THICK OR OVERLAY DOORS UP TO 1-5/16" (33MM) THICK - 20 LBS. LOAD RATING PER PAIR. SELF-CLOSING HINGES HAVE A 94° CLOSING ANGLE - USE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). COMPATIBLE WITH ALL DOMI® MOUNTING PLATES. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 FH NICKEL SCREWS - 828-558 .
|
|
|
|
Hardware Hinges - Concealed
|
RUGGED AND ECONOMICAL SALICE THREE WAY ADJUSTABLE FACE FRAME HINGES
|
| 106d 1/2"o/l 1pc Ff Hinge Screw-on
...plus other(s)
|
OPENING 106°, SALICE ADJUSTABLE FACE FRAME HINGES USE SCREW ON OR PRESS IN MOUNTING:
ONE PIECE, SELF CLOSING HINGE WITH 35MM CUP AND TWO WING MOUNTING PLATE - INSTALLS IN BLUM® BORING PATTERN. MOUNTING PLATE FASTENS TO CENTER OF FACE FRAME EDGE FOR ADDED STRENGTH AND STABILITY. OVERLAYS CAN BE ADJUSTED BY ±1/16" - USE A 2.5MM TAB (K) FOR ALL OVERLAYS. HINGE CUPS AND MOUNTING PLATES REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). LIFETIME WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
DAMPER SYSTEM ADDS SOFT CLOSING FEATURE TO SELF CLOSING CABINET DOORS
|
| Smove Cyl For 200/b/f-beige
...plus other(s)
|
THE SALICE SMOVE DAMPER SYSTEM USES SMALL CYLINDERS TO ABSORB THE PRESSURE FROM SELF CLOSING CABINET DOORS AND ELIMINATE NOISE. AFTER A DOOR IS REOPENED, PRESSURE IS RELEASED AND THE CYLINDER PISTON MOVES FORWARD, AGAIN READY FOR USE:
CYLINDERS CAN BE PRESS MOUNTED INTO 10MM DIA. X 50MM DEEP HOLES BORED INTO CABINET FRAMES OR SURFACE MOUNTED, USING OPTIONAL ADAPTERS. FOR BEST RESULTS ON BOTH FACE FRAME AND FRAMELESS CABINETS, CYLINDERS SHOULD BE MOUNTED APPROXIMATELY 27MM FROM THE HINGE SIDE (DISTANCE CAN VARY DUE TO DOOR WEIGHT AND CLOSING PRESSURE). CABINET DOORS OVER 1,600MM (63") HIGH REQUIRE TWO SMOVE CYLINDERS. AVAILABLE IN HONEY OR BEIGE TO COMPLEMENT MOST CABINET COLORS. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
FIVE SECOND CLOSING CABINET HINGES PUT AN END TO SLAMMING DOORS AND MASHED FINGERS
|
| F/o Soft Close Hinge And Plate
|
WITH A PNEUMATIC CYLINDER TO PROVIDE HANDS FREE ACTION, EVOLVE™ SILENT-CLOSE CABINET HINGES SHUT CABINET DOORS SAFELY, SILENTLY AND COMPLETELY:
FULL OVERLAY, 110° OPENING ANGLE WITH THREE WAY ADJUSTMENT. CLOSING ACTION ENGAGES AT 80° OPEN TO SOFTLY SHUT THE DOOR - 5 SECOND AVERAGE CLOSING TIME. ELIMINATES NEED FOR BUMPERS OR SOFT CLOSE DEVICES. BLUM™ BORING PATTERN AND CLIP-ON MOUNTING PLATES. HINGES EXCEED ANSI/BIFMA STANDARDS. SOLD IN PAIRS WITH MOUNTING PLATES AND SCREWS INCLUDED. IMPORTED.
|
|
|
|
Hardware Hinges - Concealed
|
OVERLAY DOORS FOR FRAMELESS CABINETS ARE EASY TO INSTALL WITH BLUM® CLIP TOP™ HINGES
|
| 107d F/o Hinge Cliptop Screw-on
...plus other(s)
|
ALL STEEL, NICKEL PLATED BLUM® CLIP TOP™ HINGES FEATURE THREE DIMENSIONAL ADJUSTMENT INCLUDING SPIRAL- TECH™ DEPTH ADJUSTMENT:
THREE-POINT CONNECTION BETWEEN HINGE AND MOUNTING PLATE FOR ADDED STRENGTH. AUDIBLE "CLIP" SOUND CONFIRMS ATTACHMENT OF THE HINGE TO THE MOUNTING PLATE. 107°, 120° OR 170° OPENING ANGLES FOR OVERLAY DOORS. SCREW-ON, PRESS-IN (DOWELLED) OR INSERTA™ TOOL-FREE CUP MOUNTING. ALL SCREW-ON CUPS AND MOUNTING PLATES ATTACH WITH #6X5/8" FH NICKEL PLATED SCREWS. (FASTENERS SOLD SEPARATELY) A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
EURO HINGE SCREWS #6X5/8" - 858-228.
|
|
|
|
Hardware Hinges - Concealed
|
USE BLUM® CLIP TOP™ TECHNOLOGY FOR FACE FRAME CABINET DOORS
|
| 6mm Cam Steel Ff Plate Screw-on
...plus other(s)
|
ALL STEEL, NICKEL-PLATED BLUM® CLIP TOP™ FACE FRAME HINGES FEATURE THREE-DIMENSIONAL ADJUSTMENT USING SPIRAL TECH™ DEPTH ADJUSTMENT:
THREE POINT CONNECTION BETWEEN HINGE AND MOUNTING PLATE FOR ADDED STRENGTH. AUDIBLE "CLIP" SOUND CONFIRMS THE ATTACHMENT OF THE HINGE TO THE MOUNTING PLATE. OPENING ANGLES FROM 107° TO 170° FOR OVERLAY APPLICATIONS. OPENING ANGLES OF 107° OR 120° FOR INSET DOOR APPLICATIONS. SCREW-ON, PRESS-IN OR INSERTA™ TOOL FREE HINGE MOUNTING. FACE FRAME ADAPTER PLATES SCREW ON TO CABINET FRAME. USE FLANGED, WRAPAROUND MOUNTING PLATE FOR ADDED STRENGTH WITH 170° HINGES IN OVERLAY APPLICATIONS. A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 HINGE SCREWS - 828-558. #7 X 5/8 HINGE SCREWS - 938-426. #8 X 3/4 HINGE SCREWS - 946-140.
|
|
|
|
Hardware Hinges - Concealed
|
TWIN OVERLAY DOORS ARE SIMPLE WITH BLUM® HINGES
|
| 107d H/o Hinge Cliptop Screw-on
...plus other(s)
|
THESE BLUM® BACK TO BACK OVERLAY DOOR HINGES ARE AVAILABLE IN SCREW-ON, PRESS-IN OR INSERTA™ TOOL-FREE MOUNTING STYLES:
MOUNT DOORS BACK TO BACK ON A SINGLE PANEL WITH THESE HINGE AND PLATE COMBINATIONS. THREE OPENING ANGLES (107°, 120°+, 170°). CHOOSE EXPANDO™ PLATE TO MOUNT TWIN DOORS INTO LINE BORED PANELS. A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
USE THESE BLUM® CLIP TOP™ HINGES FOR INSET DOORS ON FRAMELESS CABINETS
|
| 107d Inset Hinge Cliptp Screw-on
...plus other(s)
|
NICKEL PLATED STEEL, SELF CLOSING BLUM® CLIP TOP™ HINGES ARE AVAILABLE IN SCREW-ON, PRESS-IN OR INSERTA™ TOOL-FREE MOUNTING STYLES:
THREE OPENING ANGLES (107°, 120°, 170°). THREE DIMENSIONAL ADJUSTMENTS INCLUDING SPIRALTECH™ DEPTH ADJUSTMENT FOR EASE OF ALIGNMENT. MOUNT USING STANDARD BLUM® BORING PATTERN FOR HINGE CUPS AND 37MM X 32MM PATTERN FOR MOUNTING PLATES. COMPATIBLE WITH ALL CLIP™ MOUNTING PLATES. LIFETIME MANUFACTURER'S WARRANTY. A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 HINGE SCREW - 858-228. #6 X 1/2 HINGE SCREW - 145-988.
|
|
|
|
Hardware Hinges - Concealed
|
THESE BLUM® HINGES HANDLE DOORS UP TO 30MM THICK
|
| 95d F/o Hinge Td Cliptp Screw-on
...plus other(s)
|
THESE SELF CLOSING, NICKEL PLATED STEEL BLUM® CLIP TOP™ HINGES FEATURE THREE DIMENSIONAL ADJUSTMENT, INCLUDING SPIRAL-TECH™ CAM DEPTH ADJUSTMENT BUILT INTO THE HINGE ARM:
95° OPENING ANGLE - USE FOR FRAMELESS PANEL OR FACE FRAME CONSTRUCTION. SCREW ON, PRESS IN OR TOOL FREE (INSERTA™) MOUNTING. ALL CLIP TOP™ HINGES COMPATIBLE WITH CLIP SERIES MOUNTING PLATES. SCREW ON HINGES AND MOUNTING PLATES REQUIRE #6 X 5/8" FLAT HEAD SCREWS (SOLD SEPARATELY). LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
EURO HINGE SCREWS #6X5/8" - 858-228.
|
|
|
|
Hardware Hinges - Concealed
|
CLIPTOP™ ANGLED HINGES FOR CORNER MERGE APPLICATIONS
|
| 95d H/o Hinge Td Cliptp Inserta
...plus other(s)
|
ANGLED CLIPTOP™ HINGES ALLOW FOR A WIDE ARRAY OF CORNER CABINET DESIGNS. HINGES ARE SPECIALLY DESIGNED FOR PANEL (FRAMELESS) APPLICATIONS - CORNER MERGE PATTERN MAINTAINS SQUARE EDGES ON ALL DOORS ALLOWING SIMPLER PANEL DOOR EDGEBANDING:
ACCOMMODATE ANGLES FROM 5° TO 45°. TOOL FREE INSERTA MOUNTING. SCREW ON BASEPLATE MOUNTING. NOTE: SOME ANGLES REQUIRE THE ADDITION OF AN ANGLED SPACER WEDGE. MANUFACTURERS LIFETIME WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
BLUM® CLIP TOP™ HINGES FOR BLIND CORNER INSET DOORS
|
| 95d Inset Blnd Crnr Hng Screw-on
...plus other(s)
|
THESE BLUM® CLIP TOP™ HINGES ALLOW YOU TO MOUNT INSET DOORS WHERE NO SIDE WALL PANEL IS AVAILABLE:
ALL STEEL WITH NICKEL PLATING. THREE DIMENSIONAL ADJUSTMENT FOR A PERFECT FIT - MINIMUM 70MM CABINET WIDTH REQUIRED TO MOUNT HINGES. 134-396, 134-459 - SCREW ON HINGES AND PLATES REQUIRE #6 X 5/8" WOOD SCREWS (SCREWS SOLD SEPARATELY). A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
BLUM® BLIND CORNER OVERLAY DOOR HINGES
|
| 95d O/l Blnd Crnr Hng Screw-on
...plus other(s)
|
ALL STEEL, NICKEL PLATED BLUM® CLIP TOP™ BLIND CORNER OVERLAY DOOR HINGES ALLOW YOU TO MOUNT OVERLAY DOORS WHERE NO SIDE WALL PANEL IS AVAILABLE:
OVERLAYS DETERMINED BY PLATE SETBACK AND BORING DISTANCE (TAB K). DOOR GAP IS DETERMINED BY PLATE HEIGHT. STATIONARY PANEL MUST BE A MINIMUM 86MM TO ACCOMMODATE HINGE. 134-408, 134-459, 134-462 - SCREW ON HINGES AND PLATES REQUIRE #6 X 5/8" WOOD SCREWS (SCREWS SOLD SEPARATELY). A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
BLUM® HINGES FOR 45° DIAGONAL INSIDE CORNER DOORS
|
| 45d Diag Corner Hng Screw-on
...plus other(s)
|
ALL STEEL, NICKEL PLATED BLUM® CLIP TOP™ 45° DIAGONAL INSIDE CORNER DOOR HINGES ALLOW YOU TO MOUNT CORNER DOORS AT 45° BETWEEN ADJACENT OVERLAY DOORS:
THREE DIMENSIONAL ADJUSTMENT FOR PERFECT ALIGNMENT. 134-420, 134-459 - SCREW ON HINGES AND PLATES REQUIRE #6 X 5/8" WOOD SCREWS (SCREWS SOLD SEPARATELY). A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
THESE BLUM® CLIP TOP™ HINGES GIVE INTERIOR DRAWERS FULL CLEARANCE
|
| 155d Zeropro Hng Cliptp Screw-on
...plus other(s)
|
ALL METAL WITH NICKEL PLATING, THESE BLUM® CLIP TOP™ HINGES ARE FOR FRAMELESS OR FRAME APPLICATIONS IN CABINETS WITH INTERIOR DRAWERS OR PULLOUTS:
THREE DIMENSIONAL ADJUSTMENT FOR HORIZONTAL, VERTICAL AND IN/OUT ALIGNMENT, INCLUDING SPIRAL-TECH™ DEPTH ADJUSTMENT. DOORS COMPLETELY CLEAR THE CABINET OPENING STARTING AT 90° ALLOWING PULLOUTS TO PASS. MINIMUM -2.3MM PROTRUSION AT 90° WHEN USED WITH ZERO-HEIGHT MOUNTING PLATE. AVAILABLE IN SCREW-ON, PRESS-IN OR TOOL-FREE INSERTA™ MOUNTING. FOR MAXIMUM STRENGTH IN FACE FRAME APPLICATIONS, USE WRAPAROUND MOUNTING PLATE 175L6600.24. A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
to see Sub Categories)
