|
|
|
Fasteners - Mechanical Fasteners
|
KV® 516ZC COUNTERTOP JOINT FASTENERS
|
| Tite Joint Fastener
...plus other(s)
|
ZINC-COATED KV® JOINT FASTENERS APPLY EVEN, CONTROLLED PRESSURE IN 3/4" MATERIAL WITHOUT TWISTING OR BUCKLING:
GREAT FOR CUSTOM COUNTERTOPS, DESKTOPS, KNOCK-DOWN FURNITURE AND FIXTURES. 516 ZC TITE-JOINT FASTENERS HAVE A CENTER-TO-CENTER DISTANCE THAT ADJUSTS FROM 2" TO 3-1/2". FIT INTO 5/8" DEEP X 7/8" DIA. HOLE AND USE A 7/16" DIA. HOLE FOR THE CROSSMEMBER. SOLD INDIVIDUALLY OR IN BOXES. OPTIONAL ACCESSORIES HELP SPEED INSTALLATION. 513 ZC ECONOMY FASTENERS HAVE A 4" LONG BOLT WITH 7/16" HEAD AND TWO 3/16" X 7/16" X 1-1/4" FLAT BAR PLATES. AVAILABLE IN PACKAGES OF 10, 100 AND 500.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
THESE KNAPE & VOGT® 8400 SERIES SLIDES FEATURE CONVENIENT SELF CLOSING FUNCTION
|
| 12" 8417 Sc Full Ext Slide
...plus other(s)
|
KV 8417 AND KV 8419 DRAWER SLIDES OFFER SMOOTH, QUIET AND RELIABLE PERFORMANCE PLUS A SELF CLOSING FEATURE:
DESIGNED FOR USE IN BOX DRAWER APPLICATIONS UP TO 18" WIDE AND WHERE THE LOAD DOES NOT EXCEED 100 LB. A FORWARD IN STOP ABSORBS THE IMPACT OF THE CLOSING DRAWER, REDUCING STRESS ON THE SELF CLOSING MODULE. RETURN SPRING DESIGN ELIMINATES METAL TO METAL NOISE FOUND IN OTHER BRANDS. 1/2" (+1/32", -0") CLEARANCE PER SIDE. ANOCHROME FINISH (SCREWS AND COMPLETE INSTRUCTIONS INCLUDED). KV 8419 SLIDES ADD 1" OVERTRAVEL TO SLIDE LENGTH FOR BETTER ACCESS TO DRAWERS UNDER COUNTERTOPS. EXCEED BHMA, KCMA AND BIFMA 100 LB. CLASS REQUIREMENTS.
SOLD IN POLYBAGGED PAIRS WITH INSTRUCTIONS AND MOUNTING SCREWS INCLUDED. MANUFACTURER'S LIMITED LIFETIME WARRANTY USA TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KV® FACE FRAME BRACKETS - <868-157.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
KV® 8800 FULL EXTENSION SLIDES PROVIDE EXTRA STRENGTH FOR TOOL BOXES AND WORK STATIONS
|
| 12" 200# Fe Bb Slide-ano
...plus other(s)
|
ENGINEERED FOR STRENGTH AND DURABILITY, KNAPE & VOGT® 8800 HEAVY DUTY FULL EXTENSION DRAWER SLIDES ARE MADE FROM COLD ROLLED STEEL AND FEATURE A NON-HANDED DESIGN FOR QUICK AND EASY INSTALLATION:
SOLD IN BOXES OF FOUR PAIR (8 SLIDES) - IDEAL FOR COMMERCIAL OR INDUSTRIAL APPLICATIONS. SLIDE MEMBERS DO NOT DISCONNECT. TELESCOPIC ACTION SIDE MOUNT SLIDES ARE 2.282" HIGH. SIDE CLEARANCE REQUIRED IS .75" PER SIDE. CLOSED POSITION HOLD-IN DETENT. ANOCHROME™ ELECTRO ZINC PLATED AND LACQUERED. MOUNT WITH #10 PAN HEAD SCREWS NOT INCLUDED. MEETS OR EXCEEDS ANSI PERFORMANCE STANDARDS ESTABLISHED BY BIFMA. MANUFACTURER'S LIMITED LIFETIME WARRANTY. IMPORTED.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
KV® 8805 OVERTRAVEL SLIDES WITH QUICK DISCONNECT FOR DRAWERS UP TO 42" WIDE
|
| 12" 200# Fe Bb Slide W/qd&ot
...plus other(s)
|
IDEAL FOR DRAWERS UP TO 42" WIDE WHERE 1" OVERTRAVEL AND A QUICK DISCONNECT RAIL ARE NEEDED, KNAPE & VOGT® 8805 HEAVY DUTY OVER-TRAVEL DRAWER SLIDES ARE MADE FROM COLD ROLLED STEEL AND FEATURE A NON-HANDED DESIGN ON BOTH THE SLIDE AND QD RAIL FOR QUICK AND EASY INSTALLATION:
SOLD IN BOXES OF FOUR PAIR (8 SLIDES) - IDEAL FOR COMMERCIAL OR INDUSTRIAL APPLICATIONS. MAXIMUM WEIGHT LOAD NOT TO EXCEED 200 LBS. TELESCOPIC ACTION SIDE-MOUNT SLIDES ARE 2-9/32" HIGH - REQUIRE 0.89" CLEARANCE PER SIDE. ANOCHROME™ ELECTRO ZINC-PLATED AND LACQUERED (#8 PAN HEAD MOUNTING SCREWS NOT INCLUDED). MEETS OR EXCEEDS ANSI PERFORMANCE STANDARDS ESTABLISHED BY BIFMA. MANUFACTURER'S LIMITED LIFETIME WARRANTY. IMPORTED.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
EXTRA HEAVY DUTY KV® 8900 FULL EXTENSION SLIDES ARE IDEAL FOR INDUSTRIAL, COMMERCIAL OR VEHICLE APPLICATIONS
|
| 12" 8900 Full Ext Slide
...plus other(s)
|
ENGINEERED FOR STRENGTH AND DURABILITY, KNAPE & VOGT® KV8900 HEAVY DUTY FULL EXTENSION DRAWER SLIDES ARE MADE FROM COLD-ROLLED STEEL AND CAN SUPPORT LOADS FROM 180 TO 500 LBS., BASED UPON APPLICATION:
IDEAL FOR COMMERCIAL OR INDUSTRIAL APPLICATIONS 12"-60" IN SINGLE PAIRS OR 12" TO 22" LONG SLIDES IN BOXES OF FOUR PAIR (8 SLIDES), 22" TO 28" - BOXES OF THREE PAIR (6 SLIDES), 30" TO 36" - BOXES OF TWO PAIR 4 SLIDES), 42" TO 60" - BOXES OF ONE PAIR (2 SLIDES). SUGGESTED LOAD RATINGS ARE AS FOLLOWS: LIMITED USE, 500 LBS.; DAY-TO-DAY USE, 400 LBS.; VEHICULAR USE, 300 LBS.; FLAT MOUNT USE, 180 LBS. TELESCOPIC ACTION FLAT- OR SIDE-MOUNT SLIDES ARE 3" HIGH AND REQUIRE 0.75" CLEARANCE PER SIDE (SLIDE RAILS DO NOT DISCONNECT). HEAVY-DUTY BALL BEARINGS FOR SMOOTH TRAVEL - NON-METALLIC OPEN AND CLOSED STOPS FOR SILENT OPERATION. CLOSED POSITION HOLD-IN DETENT. ANOCHROME™ ELECTRO ZINC-PLATED AND LACQUERED (MOUNTING SCREWS NOT INCLUDED). SLIDES REQUIRE #10 PAN HEAD SCREWS FOR WOODEN BOX APPLICATIONS; #10 FLAT HEAD MACHINE SCREWS CAN BE USED FOR MOUNTING TO METAL CABINETS. MEET OR EXCEED ANSI PERFORMANCE STANDARDS ESTABLISHED BY BIFMA. NOTE: SLIDES MUST NEVER BE USED FOR PULLOUT STEPS, PLATFORMS OR ANY APPLICATION SUPPORTING HUMAN WEIGHT). MANUFACTURER'S LIMITED LIFETIME WARRANTY. IMPORTED
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
EXTRA HEAVY-DUTY FULL-EXTENSION KV® DRAWER SLIDES IN COST-EFFECTIVE BULK PACKS
|
| 12" 8900 Full Ext Slide
...plus other(s)
|
ENGINEERED FOR STRENGTH AND DURABILITY, KNAPE & VOGT® KV8900 HEAVY-DUTY FULL-EXTENSION DRAWER SLIDES ARE MADE FROM COLD-ROLLED STEEL AND CAN SUPPORT LOADS FROM 180 TO 500 LBS., BASED UPON APPLICATION:
IDEAL FOR COMMERCIAL OR INDUSTRIAL APPLICATIONS - 12" TO 22" LONG SLIDES IN BOXES OF FOUR PAIR (8 SLIDES), 22" TO 28" - BOXES OF THREE PAIR (6 SLIDES), 30" TO 36" - BOXES OF TWO PAIR 4 SLIDES), 12" TO 60" - BOXES OF ONE PAIR (2 SLIDES). TELESCOPIC ACTION FLAT- OR SIDE-MOUNT SLIDES ARE 3" HIGH - 0.75" CLEARANCE (SLIDE RAILS DO NOT DISCONNECT). HEAVY-DUTY BALL BEARINGS FOR SMOOTH TRAVEL - NON-METALLIC OPEN AND CLOSED STOPS FOR SILENT OPERATION. CLOSED POSITION HOLD-IN DETENT. ANOCHROME™ ELECTRO ZINC-PLATED AND LACQUERED (MOUNTING SCREWS NOT INCLUDED). MEET OR EXCEED ANSI PERFORMANCE STANDARDS ESTABLISHED BY BIFMA.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
KNAPE & VOGT® 8400 DRAWER SLIDES COMBINE 100 LB. LOAD RATING, HIGH PERFORMANCE FEATURES AND CHOICE OF THREE FINISHES
|
| 8" 8400 Full Ext Slide-ano
...plus other(s)
|
ONE OF THE QUIETEST, SMOOTHEST SLIDES AVAILABLE, KNAPE & VOGT® KV 8400 FULL EXTENSION DRAWER SLIDES EXCEED ALL REQUIREMENTS FOR 100 LB. CLASS BHMA, KCMA AND BIFMA APPLICATIONS. BR>
DESIGNED FOR USE ON BOX DRAWER APPLICATIONS UP TO 24" WIDE AND WHERE THE MAXIMUM WEIGHT LOAD IS NOT TO EXCEED 100 POUNDS. EXCEED ALL REQUIREMENTS FOR THE 100 LB. CLASS FOR BHMA, KCMA AND BIFMA APPLICATIONS. NON-HANDED DESIGN FEATURES A LEVER DISCONNECT FOR EASY DRAWER REMOVAL. METAL BALL RETAINER HOLDS 3 BALL BEARINGS PER INCH OF RACE. SIDE CLEARANCE IS 1/2"+1/32" EACH SIDE. BORING FITS THE STANDARD 32MM PATTERN. DRAWERS CAN BE ADJUSTED WITHOUT REMOVAL AVAILABLE IN ANOCHROME™ (BRIGHT ZINC), WHITE OR EBONY FINISHES. SOLD IN POLYBAGGED PAIRS WITH MOUNTING SCREWS AND INSTRUCTIONS OR BULK BOXES OF 10 PAIRS WITH INSTRUCTIONS. BULK BOXES DO NOT INCLUDE MOUNTING SCREWS. USE OPTIONAL FRONT AND REAR MOUNTING BRACKETS FOR FACE FRAME APPLICATIONS. MANUFACTURER'S LIMITED LIFETIME WARRANTY USA TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KV® FACE FRAME BRACKETS - <868-157. #8 X 1/2 SCREWS - 931-338. #8 X 7/16 SCREWS - 946-217.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
SOFT CLOSING FULL EXTENSION BALL BEARING SLIDES
|
| 12" Fe Bb Soft Close Slide-ano-bulk
...plus other(s)
|
FORCE MANAGEMENT™ (FM) FROM KNAPE & VOGT IS THE NEXT GENERATION OF SOFT-CLOSE DRAWER SLIDE TECHNOLOGY. FORCE MANAGEMENT™ (FM) FROM KNAPE & VOGT IS THE NEXT GENERATION OF SOFT-CLOSE DRAWER SLIDE TECHNOLOGY. FM TECHNOLOGY ESTABLISHES A NEW STANDARD IN SOFT-CLOSE FUNCTIONALITY BY DELIVERING SUPERIOR PERFORMANCE IN DAMPENING ACTION, EFFORTLESS DRAWER OPENING AND SMOOTH OPERATION. 8450FM/8455FM SLIDES INCLUDE A PATENT-PENDING FORCE MANAGEMENT™ MODULE THAT UTILIZES AN INNOVATIVE RACK AND GEAR SYSTEM. THIS WELL DESIGNED SYSTEM PLACES MECHANICAL FORCES WHERE THEY ARE NEEDED TO SIGNIFICANTLY REDUCE THE EFFORT TO OPEN A DRAWER AND TO DELIVER OPTIMAL DRAWER CLOSURE. ALL THIS IS BUILT ON THE TIME-TESTED KV 8400 SLIDE PLATFORM.
INNOVATIVE SOFT-CLOSE MODULE WITH FORCE MANAGEMENT™TECHNOLOGY 1/2" SIDE CLEARANCE, NO SET-UP CHANGE FROM KV 8400 OR KV 8450. 8450FM: FULL-EXTENSION 100-POUND CLASS RATED (IN 12" TO 28" LENGTHS). 8455FM: 1" OVERTRAVEL 90-POUND CLASS RATED (IN 16" TO 28" LENGTHS) NON-HANDED SLIDE DESIGN ALLOWS FOR EASY, FLEXIBLE INSTALLATION. TRADITIONAL AND 32MM HOLE PATTERNS ALLOW FOR EASY, FLEXIBLE INSTALLATION ON FRAMED AND FRAMELESS CABINETRY. THREE BALL BEARINGS PER INCH AND POLYMER STOP CUSHIONS AID WITH SMOOTH QUIET OPERATION OF THE SLIDE. PUSH-IN LEVER DISCONNECT ALLOWS FOR EASY DRAWER REMOVAL. BALL RETAINER LATCH AND RAMPS ALLOW FOR EASY DRAWER INSERTION. BULK PACK SLIDES OFFERED IN ANOCHROME™ OR EBONY BLACK FINISHES.(PURCHASE MOUNTING SCREWS SEPARATELY.) USE OPTIONAL FRONT AND REAR BRACKETS FOR FACE FRAME APPLICATIONS. BACKED BY THE EXCLUSIVE KNAPE & VOGT LIMITED LIFETIME WARRANTY IMPORTED
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
KNAPE & VOGT® 8400 SERIES DRAWER SLIDES COMBINE 100 LB. LOAD RATING, HIGH PERFORMANCE FEATURES AND CHOICE OF THREE FINISHES
|
| 10" 8400 Full Ext Slide-ano
...plus other(s)
|
ONE OF THE QUIETEST, SMOOTHEST SLIDES AVAILABLE, KNAPE & VOGT® KV 8400 FULL EXTENSION DRAWER SLIDES EXCEED ALL REQUIREMENTS FOR 100 LB. CLASS BHMA, KCMA AND BIFMA APPLICATIONS. BR>
DESIGNED FOR USE ON BOX DRAWER APPLICATIONS UP TO 24" WIDE AND WHERE THE MAXIMUM WEIGHT LOAD IS NOT TO EXCEED 100 POUNDS. EXCEED ALL REQUIREMENTS FOR THE 100 LB. CLASS FOR BHMA, KCMA AND BIFMA APPLICATIONS. NON-HANDED DESIGN FEATURES A LEVER DISCONNECT FOR EASY DRAWER REMOVAL. METAL BALL RETAINER HOLDS 3 BALL BEARINGS PER INCH OF RACE. SIDE CLEARANCE IS 1/2"+1/32" EACH SIDE. BORING FITS THE STANDARD 32MM PATTERN. DRAWERS CAN BE ADJUSTED WITHOUT REMOVAL AVAILABLE IN ANOCHROME™ (BRIGHT ZINC), WHITE OR EBONY FINISHES. SOLD IN POLYBAGGED PAIRS WITH MOUNTING SCREWS AND INSTRUCTIONS OR BULK BOXES OF 10 PAIRS WITH INSTRUCTIONS. BULK BOXES DO NOT INCLUDE MOUNTING SCREWS. USE OPTIONAL FRONT AND REAR MOUNTING BRACKETS FOR FACE FRAME APPLICATIONS. MANUFACTURER'S LIMITED LIFETIME WARRANTY USA
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KV® FACE FRAME BRACKETS - <868-157. #8 X 1/2 SCREWS - 931-338. #8 X 7/16 SCREWS - 946-217.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Keyboard Support
|
KV® 8157 VARIABLE HEIGHT KEYBOARD SLIDES HAVE TABS FOR EASY MOUNTING OF TRAYS
|
| 14" 8157 Keyboard Slide-ano
...plus other(s)
|
FOR GREATER VERSATILITY, KNAPE & VOGT® MODEL 8157 VARIABLE HEIGHT KEYBOARD SLIDES ALLOW THE KEYBOARD TRAY TO BE MOUNTED FROM EITHER THE SIDE OR THE BOTTOM:
DESIGNED FOR APPLICATIONS WHERE A POSITIVE DRAWER "HOLD-OUT" FEATURE AND HEIGHT ADJUSTMENT ARE DESIRED. CABINET MEMBERS MOUNT TO UNDERSIDE OF DESK OR TABLETOP USING ADJUSTABLE HEIGHT BRACKETS. TABS ALLOW KEYBOARD TRAY TO MOUNT FROM THE BOTTOM OR SIDE. SLIDES FEATURE BOTH LOCK-IN AND LOCKOUT DETENTS. OVERALL DROP IN HEIGHT IS ADJUSTABLE IN SEVEN INCREMENTS FROM 2-11/32" TO 3-11/16". MOUNTING BRACKETS ARE REVERSIBLE FOR INBOARD OR OUTBOARD MOUNTING. WIDTH OF SIDE BRACKETS IN THE OUTBOARD POSITION IS 1-5/8" PER SIDE. IN THE INBOARD POSITION THE BRACKETS REQUIRE 5/8" CLEARANCE. MEET OR EXCEED THE REQUIREMENTS FOR THE 75 LB. CLASS FOR BHMA, KCMA AND BIFMA APPLICATIONS. ANOCHROME™ ELECTRO-PLATED ZINC WITH LACQUERED FINISH OR BLACK FINISH. SOLD IN POLYBAGGED PAIRS WITH INSTRUCTIONS AND MOUNTING SCREWS INCLUDED. MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA.
QUANTITY PACKS INCLUDE 20 PAIRS OF SLIDES (MOUNTING SCREWS AND INSTRUCTIONS NOT INCLUDED) - LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Other
|
KV® 8000 UNDERMOUNT PULLOUT SLIDES WORK WELL FOR PANTRIES, COMPUTERS AND ENTERTAINMENT CENTERS
|
| 12" 8000 Pullout Slide-o/travel
...plus other(s)
|
|
KNAPE & VOGT®8000 UNDERMOUNT PULL-OUT SLIDES ARE DESIGNED FOR USE ON KITCHEN PANTRIES, COMPUTER AND ENTERTAINMENT CENTERS OR ANYWHERE A PULL OUT SHELF IS REQUIRED.: CONSTRUCTED OF HIGH STRENGTH STEEL ALLOY, THESE SLIDES HAVE A LOAD RATING OF 130 LBS. INCLUDED BRACKETS SIMPLIFY MOUNTING OF SLIDES TO FLOORS OR CABINET BOTTOMS. TELESCOPIC ACTION SLIDES ARE 1.54" HIGH. SLIDES FEATURE AN OVERTRAVEL EQUAL TO THE SLIDE LENGTH PLUS 0.83" (ABOUT 13/16"). 0.75" CLEARANCE (SLIDE ONLY), 2.25" WITH BRACKETS. THREE BALL BEARINGS PER INCH FOR SMOOTH AND QUIET OPERATION. HOLD-IN DETENT PREVENTS SLIDE FROM CREEPING FORWARD. SOLD IN PAIRS (MOUNTING SCREWS AND INSTRUCTIONS INCLUDED) - ANOCHROME™ ELECTRO ZINC-PLATED AND LACQUERED FINISH. MEETS OR EXCEEDS ANSI PERFORMANCE STANDARDS ESTABLISHED BY BIFMA AND KCMA. MANUFACTURER'S LIMITED LIFETIME WARRANTY. IMPORTED.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Pencil Drawer
|
KV® 8250 PENCIL DRAWER SLIDES HAVE REVERSIBLE BRACKETS FOR INBOARD OR OUTBOARD MOUNTING
|
| 12" 8250 Pencil Drwr Slide-ano
...plus other(s)
|
KNAPE & VOGT® MODEL 8250 DRAWER SLIDES OFFER 3/4 EXTENSION, 75 LB. CAPACITY (BHMA, KCMA, BIFMA APPLICATIONS) AND FEATURE MOUNTING BRACKETS THAT ADJUST OVERALL DROP HEIGHT FROM 2-11/32" TO 3-11/16":
DESIGNED FOR APPLICATIONS WHERE A VARIABLE HEIGHT PENCIL DRAWER OR CENTER DRAWER SLIDE IS DESIRED. CABINET MEMBERS MOUNT TO UNDERSIDE OF DESK OR TABLETOP USING ADJUSTABLE HEIGHT BRACKETS. DRAWER MEMBERS ARE SIDE MOUNTED. 3/4 EXTENSION SLIDES FEATURE LOCK-IN DETENTS TO KEEP DRAWERS CLOSED, BUT ALLOW EASY OPENING. MOUNTING BRACKETS ARE REVERSIBLE FOR INBOARD OR OUTBOARD MOUNTING. WIDTH OF SIDE BRACKETS IN THE OUTBOARD POSITION IS 1-5/8" PER SIDE. IN THE INBOARD POSITION THE BRACKETS REQUIRE 5/8" CLEARANCE. MEET OR EXCEED THE REQUIREMENTS FOR THE 75 LB. CLASS FOR BHMA, KCMA AND BIFMA APPLICATIONS. ANOCHROME™ ELECTRO-PLATED ZINC WITH LACQUERED FINISH OR EBONY BLACK FINISH. SOLD IN POLYBAGGED PAIRS WITH INSTRUCTIONS AND MOUNTING SCREWS INCLUDED. MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Pocket Door
|
KV8092 4X4 POCKET DOOR™ SLIDES HANDLE LARGE OR HEAVY DOORS
|
| 18" 8092 Pocket Door Slide
...plus other(s)
|
PERFECT FOR LARGE ENTERTAINMENT AND HOME THEATER CABINETS, KNAPE & VOGT® KV8092 4X4 POCKET DOOR™ SLIDES HAVE BEEN SPECIFICALLY DESIGNED TO HOLD DOORS UP TO 75 LBS. AND UP TO 72"H X 26"W. MORE IMPORTANTLY, SLIDE INSTALLATION REQUIRES 44% LESS HARDWARE THAN COMPETING PRODUCTS:
SELF-CLOSING, THREE-WAY ADJUSTABLE ISOMETRIC DESIGN - EBONY FINISH. DUAL RACK-AND-PINION DESIGN ELIMINATES DOOR SAG. METAL BALL RETAINER HAS THREE BEARINGS PER INCH OF RACE FOR SMOOTH AND QUIET OPERATION. SLIDE TRACK INDEXING SYSTEM SPEEDS INSTALLATION. HINGE BASES PRE-MOUNTED FOR FASTER INSTALLATION. HINGE OPTIONS ALLOW STANDARD INSET APPLICATION ALONG WITH FREE SWING, PARTIAL OVERLAY, THICK DOOR AND EXTRA THICK DOOR APPLICATIONS.
EACH DOOR REQUIRES (SOLD SEPARATELY):
1 - 4X4 POCKET DOOR™ SLIDE PACK INCLUDING 2 SLIDES, 2 RACKS, DOOR ROLLER HARDWARE AND SHAFT HARDWARE. 1 - SHAFT TO BE CUT 2" SHORTER THAN DOOR HEIGHT. 2 - HINGE PACKS (ONE PAIR PER PACK).
INSTRUCTIONS DESCRIBE HOW TO DETERMINE HINGE HOLE CENTERS, POSITION SLIDE CHANNELS INSIDE CASE, PREPARE SHAFT AND GEAR ASSEMBLY, HANG DOOR AND ADJUST HINGES AND INSTALL GUIDE ROLLERS (NOT RECOMMENDED FOR RECEDING OR FLIPPER DOOR APPLICATIONS.)
8090PCR - CASSETTE ROLLER (SEE INSET) MOUNTS ONTO CABINET SIDE TO ALLOW RAISED PANEL DOORS TO CLEAR SLIDES WHEN CLOSING (REQUIRED TO SUPPORT RAISED PANEL DOORS; NOT REQUIRED WITH FLAT PANEL DOORS). MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA
|
|
|
|
Hardware Drawer Slides - Ball Bearing Pocket Door
|
SPECIALLY DESIGNED KNAPE & VOGT® 8070/8072 SERIES POCKET DOOR SLIDES INSTALL QUICKLY AND EASILY
|
| 12" 8070 Pocket Door Slide-ebony
...plus other(s)
|
SIDE-MOUNT KNAPE & VOGT® 8070 SERIES POCKET DOOR SLIDES INDEX TO THE CABINET TOP AND BOTTOM FOR EASE OF INSTALLATION. FOLLOWER STRIP IS MOUNTED AFTER THE SLIDES ARE INSTALLED - 1-23/32" SIDE CLEARANCE INCLUDING HINGES:
EBONY BLACK FINISHED STEEL SLIDES RUN ON PRECISION STEEL BALL BEARINGS FOR SMOOTH AND QUIET OPERATION. PACKAGE FOR ONE INSET DOOR INCLUDES TWO SLIDES, MOUNTING HARDWARE, PAIR OF STANDARD 35MM SELF-CLOSING INSET HINGES, PREMOUNTED HINGE BASES AND INSTRUCTIONS. KV® 8072 SERIES POCKET DOOR SLIDESARE DESIGNED TO ALLOW OPTIONS FOR FREE-SWING DOORS OR THICK DOORS UP TO 1-1/4" THICKNESS. SLIDES INCLUDE HINGE BASES, BUT HINGES MUST BE ORDERED SEPARATELY. 30 LBS. HEAVY DUTY RATING; 42"H X 24"W MAXIMUM DOOR SIZE. MEET OR EXCEED BIFA, BHMA AND KCMA ANSI PERFORMANCE STANDARDS FOR THE 30 LB CLASS. OPTIONAL 8090PCR CASSETTE ROLLER MOUNTS ONTO CABINET SIDE TO ALLOW RAISED PANEL DOORS TO CLEAR THE SLIDES WHEN CLOSING (NOT REQUIRED FOR FLAT PANEL DOORS). MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Pocket Door
|
KV8091 4X4 POCKET DOOR™ SLIDES
|
| 12-1/8" 4x4 Pocket Door Slide Pack
...plus other(s)
|
WITH KNAPE & VOGT® KV8091 4X4 POCKET DOOR™ SLIDES YOU PROVIDE THE HINGES AND BASEPLATES TO BEST SUIT YOUR SPECIFIC APPLICATION:
DESIGNED TO HOLD DOORS UP TO 75 LBS. AND UP TO 72"H X 26"W. DUAL RACK-AND-PINION DESIGN ELIMINATES DOOR SAG. EBONY FINISH WITH THREE BEARINGS PER INCH OF RACE FOR SMOOTH AND QUIET OPERATION. NOT RECOMMENDED FOR RECEDING OR FLIPPER DOOR APPLICATIONS.
EACH DOOR REQUIRES (SOLD SEPARATELY):
ONE 4X4 POCKET DOOR™ SLIDE PACK INCLUDING 2 SLIDES, 2 RACKS, DOOR ROLLER HARDWARE AND SHAFT HARDWARE. ONE SHAFT TO BE CUT 2" SHORTER THAN DOOR HEIGHT. TWO PAIRS OF HINGES AND BASEPLATES.
8090PCR CASSETTE ROLLER IS REQUIRED TO SUPPORT RAISED PANEL DOORS; NOT REQUIRED WITH FLAT PANEL DOORS. DOOR CONCEAL IS 4" LESS THAN SLIDE LENGTH.
OPTIONAL FULL OVERLAY KIT IS DESIGNED TO PROVIDE FULL OVERLAY ON DOORS UP TO 3/4" THICK AND ATTACHES EASILY TO KV8091 SLIDES ( REQUIRES ADDITION OF A PARTITION IN THE CABINET TO SUPPORT SLIDE MECHANISM). KIT INCLUDES 2 BRACKETS, 4 OVERLAY HINGES AND BASEPLATES, 4 HINGE COVER CAPS, 4 FELT PADS AND MOUNTING HARDWARE (FOR ONE DOOR). 75 LBS. MAXIMUM DOOR WEIGHT; 24" MINIMUM DOOR HEIGHT (NOT RECOMMENDED FOR SQUARE DOORS OR WHERE DOOR WIDTH EXCEEDS DOOR HEIGHT).
|
|
|
|
Hardware Drawer Slides - Ball Bearing Pocket Door
|
KNAPE & VOGT® 8080/8082 HARDWARE FOR POCKET DOORS, ALSO AVAILABLE IN EBONY
|
| 12" 8080 Pocket Door Slide-ano
...plus other(s)
|
THESE SLIDES HAVE ALL OF THE GREAT FEATURES YOU HAVE COME TO EXPECT FROM KV AND ARE OFFERED IN ANOCHROME™ OR EBONY FINISH TO COMPLEMENT HIGH-END FURNITURE AND DARKER WOODS:
WORK WITH DOORS FROM 5/8" TO 1-1/4" THICK; UP TO 24" WIDE X 42" HIGH AND WEIGH UP TO 30 LBS. DESIGNED FOR STANDARD INSET DOOR APPLICATIONS. REQUIRED SIDE CLEARANCE USING A 3/4" DOOR IS 1-13/16". 8080 HARDWARE PACKAGES INCLUDE SLIDES, HINGE BASES, HINGES, HARDWARE AND INSTRUCTIONS. HINGES FOR SIMILAR 8082 HARDWARE PACKAGES MUST BE ORDERED SEPARATELY. ANOCHROME ZINC PLATED STEEL OR EBONY FINISH. ONE PAIR OF HARDWARE IS FOR ONE DOOR. USA. 802-051, 110-870 - 12"L, 8.41" TRAVEL. 802-052, 110-873 - 14"L, 10.41" TRAVEL. 802-053, 110-876, 920-963 - 16"L, 12.41" TRAVEL. 802-054, 110-879, 920-970 - 18"L, 14.41" TRAVEL. 802-055, 110-885, 920-977 - 20"L, 16.41" TRAVEL. 802-056, 110-888, 920-984 - 22"L, 18.41" TRAVEL. 802-057, 110-891 - 24"L, 20.41" TRAVEL.
MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA.
|
|
|
|
Hardware Drawer Slides - Mounting Hardware
|
BRACKETS ADAPT KV® 8400 SERIES DRAWER SLIDES FOR FACE FRAME APPLICATIONS
|
| 8402 Rear Bracket-ano
...plus other(s)
|
KNAPE & VOGT® FRONT AND REAR MOUNTING BRACKETS ARE DESIGNED TO WORK WITH ALL 8400 SERIES DRAWER SLIDES - 8400, 8405, 8407, 8414, 8417, 8419 AND 8400RV:
8402 REAR MOUNTING BRACKET (ZINC FINISH) HAS A NON-HANDED DESIGN THAT IS SCREW SECURED; 2-3/4" MAXIMUM ADJUSTMENT. 8404 FRONT FACE FRAME BRACKET (ZINC, WHITE OR EBONY FINISH) FEATURES A NON-HANDED SNAP ON DESIGN - NO TOOLS REQUIRED. SOLD INDIVIDUALLY (SCREWS NOT INCLUDED).
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
KV® 8400 FULL EXTENSION DRAWER SLIDES - 905-025. KV® 8400 SELF CLOSING DRAWER SLIDES - 115-187.
|
|
|
|
Hardware Drawer Slides - Roller Box Drawer
|
KV® 1284 STRAIGHT RAIL EURO SLIDES HAVE 100 LBS. CAPACITY AND LIFT OUT DISCONNECT
|
| 1284 Nsc Slide-white-14"-pair
...plus other(s)
|
WHITE, EPOXY COATED KNAPE & VOGT® 1284 3/4 EXTENSION DRAWER SLIDES MOUNT WITH SCREWS FASTENED FROM THE BOTTOM OR SIDE. "STAY CLOSED" DESIGN WITH ADJUSTMENT SLOTS ON DRAWER AND CABINET MEMBERS EASES INSTALLATION:
ADAPTABLE TO FRAME OR 32MM MOUNTING. POSITIVE LOCK OUT FEATURE IS IDEAL FOR PULLOUT WORK SURFACES (NOT A SELF CLOSING SLIDE). 1-9/32" HIGH - SEVEN LENGTHS TO CHOOSE FROM. REQUIRES MINIMUM 1/2" CLEARANCE (±1/32"), EACH SIDE; 1" BETWEEN DRAWER SIDE HEIGHT AND CABINET OPENING. 100 LBS. BHMA, KCMA, MIFMA CLASS LOAD RATING. Q-PAK CASE MADE UP OF 4 CARTONS; 50 PAIRS PER CASE WITH INSTRUCTIONS (MOUNTING SCREWS NOT INCLUDED). USE REAR MOUNTING SOCKETS (SOLD SEPARATELY AS LEFT OR RIGHT)FOR FACE FRAME APPLICATIONS. MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
UNDERCUT HEAD SLIDE SCREWS- 931-268.
|
|
|
|
Hardware Drawer Slides - Roller Box Drawer
|
KV® 1260 AND 1300 LEVER DISCONNECT ROLLER SLIDES ARE DESIGNED FOR CABINET, VANITY AND DESK DRAWERS
|
| 12" 1260 Single Ext Slide
...plus other(s)
|
SMOOTH, QUIET AND EASY OPERATING, KV® 3/4 EXTENSION SLIDES FOR CABINETS FEATURE BALL BEARING, NYLON ROLLERS AND A POSITIVE STOP ACTION WITH STAY-CLOSED FEATURE:
3-1/8" OVERALL HEIGHT; 1/2"+1/32" CLEARANCE PER SIDE. . ZINC PLATED STEEL. TOP MOUNTED LEVER RELEASE. KV1260 SLIDES HAVE 60 LB. CAPACITY; KV1300 SLIDES HAVE 75 LB. CAPACITY. MOUNTING SCREWS INCLUDED IN POLYBAGGED PAIRS, NOT IN BULK CARTONS OR Q-PACKS. KV1304 METAL REAR MOUNTING BRACKETS FOR 1300 SERIES. LIMITED TO QUANTITIES ON HAND MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA.
|
|
|
|
Hardware Drawer Slides - Roller Full Extension
|
KV® 9400 IN-LINE™ UNDERMOUNT DRAWER SLIDES FEATURE A FULLY INTEGRATED "SOFT-CLOSE" FEATURE
|
| Undermount Self Close Slide-9" Bulk
...plus other(s)
|
DESIGNED FOR FRAME OR FRAMELESS SIDE MOUNTING, KV® 9400 IN-LINE™ FULL EXTENSION UNDERMOUNT DRAWER SLIDES MEET ALL INDUSTRY STANDARDS FOR CABINET AND DRAWER CONSTRUCTION AND INSTALLATION AND INCLUDE REMOVABLE MOTION-DAMPENING CYLINDERS THAT ELIMINATE DRAWER "SLAMMING":
32MM HOLE PATTERN - 75 LB. BHMA, KCMA AND BIFMA LOAD RATING. 2" HIGH. 4-1/2" MINIMUM DRAWER WIDTH - 9" MINIMUM, 22" MAXIMUM DRAWER DEPTH. SLIDES MOVE ON POLYMER ROLLER CARRIAGES AND HAVE BUILT-IN, SOFT-CUSHIONED STOPS ("SOFT-CLOSE" NOT AVAILABLE ON 9" SLIDES). DRAWER EXTENDS COMPLETELY BEYOND CABINET FRAME FOR EASIER ACCESS. 5/8" MAXIMUM DRAWER MATERIAL THICKNESS. SOLD IN PAIRS OR CARTONS OF 6 PAIRS (FRONT RELEASE LEVERS, REAR BRACKETS AND INSTRUCTIONS INCLUDED) - ZINC FINISH. NOTE: MOUNTING SCREWS INCLUDED IN BOXED PAIRS; NOT INCLUDED IN BULK CARTONS. LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
