|
|
|
Picture Framing - Picture Framing Tools
|
EVERYTHING YOU NEED TO MAKE YOUR OWN PICTURE FRAMES
|
| Picture Framing Kit
|
ALL IT TAKES IS YOUR OWN MATERIALS AND THE "JORGENSEN"® MODEL 91835 PICTURE FRAMING KIT AND YOU ARE READY TO BEGIN MAKING YOUR OWN, PROFESSIONAL-LOOKING PICTURE FRAMES:
KIT INCLUDES SAW, MITER BOX, POINT DRIVER, MITER JOINT FASTENING TOOL, 100 1/4" AND 3/8" MITER JOINT FASTENERS, 80 TRIANGLE POINTS, 16 EYE SCREWS, SIX 40 LBS. AND FOUR 25 LBS. PICTURE HANGERS, TWO 25 LBS. PICTURE HANGERS, 20 NAILS, 15' HANGING WIRE, 8 STEEL HANGING WIRE EYES AND 10 HANGING WIRE EYE SCREWS. EVERYTHING IS STORED INSIDE A 18-1/2"L X 8-1/4"W X 3"H DURABLE PLASTIC CASE, WITH HANDLE, TO KEEP TOOLS AND HARDWARE ORGANIZED, WEIGHS 5.4 LBS. IMPORTED.
|
|
|
|
Hand Tools - Cutting
|
COST EFFECTIVE, BUT DURABLE, JORGENSEN® PLASTIC BASE COMPOUND MITER SAW
|
| Compound Miter Saw W/plastic Base
...plus other(s)
|
QUALITY DESIGNED "JORGENSEN®" MODEL 64034 COMPOUND MITER SAW HAS A SOLID 3" X 14" PLASTIC BASE WITH BLACK FINISH AND SCREWS HOLES FOR BENCH MOUNTING - 4-5/16" MAXIMUM CUTTING HEIGHT:
QUICK-READING SCALE FEATURES 6 QUICK LOCK SETTINGS AT 90°, 45°, 36°, 30°, 22.5° AND 15° (RIGHT AND LEFT). 5-3/8" MAXIMUM CUTTING WIDTH AT 90°; 3-3/8" AT 45°. INCLUDES 23-5/8"L SAW, THAT CAN BE USED AS A CONVENTIONAL HANDSAW, MATERIAL HOLD DOWN AND STOP CLAMPS AND REPLACEABLE 14TPI WOOD CUTTING SAW BLADE. WEIGHS 7.5 LBS. USE OPTIONAL 18TPI BLADE FOR PLASTICS AND WOOD - 24TPI BLADE FOR BRASS, ALUMINUM AND METALS.
|
|
|
|
Clamps And Vises - Spring Clamps
|
HANDY SPRING CLAMPS HOLD FIRMLY
|
| 1" Spring Clamp
...plus other(s)
|
"PONY"® SPRING CLAMPS ARE A GREAT HELP WHEN THE GLUE IS SETTING UP, THE JOINT IS SLIPPING AND YOU NEED PRESSURE ON THE JOINT NOW! PRESSURE IS ALWAYS ON THE TIP:
PLATED STEEL WITH POLYVINYL HANDLE AND TIP COVERS. 4" CAPACITY SPRING CLAMP IS 12"L; 3" IS 9"L; 2" IS 6"L; 1" IS 4"L. IMPORTED.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
USE YOUR WOODWORKING SKILLS TO BUILD YOUR OWN TRADITIONAL HANDSCREWS
|
| 4" Handscrew Kit
...plus other(s)
|
IF YOU ENJOY WORKING WITH TRADITIONAL HANDSCREWS, YOU CAN NOW GO ONE STEP FURTHER AND BUILD YOUR OWN, USING 'ADJUSTABLE'™ DO-IT-YOURSELF HANDSCREW KITS AND YOUR OWN WOOD (HARDWOOD RECOMMENDED):
KITS INCLUDE SAME HIGH-QUALITY HARDWARE USED IN "JORGENSEN®" ADJUSTABLE HANDSCREWS - TWO STEEL SPINDLES (ONE SHORT "END" AND ONE LONG "MIDDLE"), TWO HARDWOOD HANDLES (WITH FERRULES AND RIVETS) AND FOUR STEEL NUTS (TWO LEFT AND TWO RIGHT HAND). CHOOSE FROM A VARIETY OF SIZES - JAW CONSTRUCTION AND ASSEMBLY INSTRUCTIONS INCLUDED. USA.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
HEAVY DUTY PRESS SCREWS IDEAL FOR DEEP REACH SURFACE CLAMPING
|
| 9" Press Screw
...plus other(s)
|
"JORGENSEN®" PRESS SCREWS ARE IDEAL FOR MAKING VENEERING FRAMES, AS PANEL CLAMPS AND FOR CUSTOM JIGS FOR ALL TYPES OF GLUING, VENEERING OR OTHER ASSEMBLY OPERATIONS:
11/16" DIAMETER COLD DRAWN STEEL SCREW WITH SMOOTHLY CUT ACME THREADS. CRANK TYPE HANDLE. MALLEABLE AND/OR DUCTILE IRON CASTINGS WITH BLACK BAKED ENAMEL FINISH. REMOVABLE SWIVEL FACE. USA.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
JORGENSEN® HOLD DOWN OFFERS QUICK BENCH TOP AND MACHINE SURFACE CLAMPING
|
| 3" #1623 Jorgenson Hold Down Clamp
|
THE "JORGENSEN"® #1623 HOLD-DOWN CLAMP IS HIGHLY RECOMMENDED FOR TIGHTLY SECURING STOCK TO ANY WOOD OR METAL WORK SURFACE:
GREAT ADDITION TO ANY WORKBENCE. DESIGNED TO ROTATE 360° AROUND THE HOLDING BLOCK OR REMOVED QUICKLY. 3" OPENING CAPACITY. 1-3/4" THROAT DEPTH. PRECISION CUT 9/16" DIAMETER SCREW WITH ACME THREAD. 2000 LB. NORMAL LOAD LIMIT. USA.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
BAND CLAMPS FOR AWKWARD OR IRREGULAR SHAPED CLAMPING PROJECTS
|
| 10' Jorgensen Band Clamp
...plus other(s)
|
CLAMP A VARIETY OF ODD SHAPES - ROUND, POLYGON, SQUARE AND MUCH MORE WITH THESE ADJUSTABLE BAND CLAMPS:
1215 - LIGHT DUTY "PONY®" CLAMP IS SUITABLE FOR MOST GENERAL PROJECTS: 1" X 15' NYLON BAND; 1,000 LBS. PROOF TEST. BLACK, RUST RESISTANT FINISH - STEEL FRAME. ALUMINUM CAM AND PLATED STEEL WRENCH. 4 PLATED STEEL CORNERS. IMPORTED.
HEAVY DUTY "JORGENSEN®" BAND CLAMPS SOLVE THE SPECIAL PROBLEM OF CLAMPING LARGE IRREGULAR SHAPES:
6210 - 2" BY 10' CANVAS BAND. 6220 - 2" BY 20' CANVAS BAND. MALLEABLE IRON FRAME WITH ORANGE BAKED ENAMEL FINISH. 5/8" DIA. COLD DRAWN STEEL SCREW WITH DEEP, SMOOTHLY CUT ACME THREADS. BALANCED CRANK HANDLE. USA.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
VERSATILE "JORGENSEN®" HAND SCREW CLAMPS PROVIDE CONTROLLED PRESSURE AND NO MARRING
|
| #5/0 4" Hand Screw Clamp
...plus other(s)
|
VERSATILE "JORGENSEN®" HAND SCREW CLAMPS HAVE JAWS MADE FROM THE FINEST HARD MAPLE AND COLD DRAWN STEEL NUTS AND SCREWS:
JAWS ADJUST TO ANY ANGLE FOR CLAMPING NON-PARALLEL SURFACES, ODD SHAPES AND CYLINDERS. FORCE CAN BE DISTRIBUTED OVER A BROAD AREA OR CONCENTRATED AT ONE POINT. SOLD IN PAIRS, CLAMP ADAPTER TIPS (890-254) INSTALL EASILY ONTO ANY SIZE HAND SCREW TO CONVERT IT INTO A MITER CLAMP FOR SECURELY CLAMPING MITERS, BUTT AND OTHER JOINTS. AVAILABLE IN EIGHT CAPACITIES RANGING FROM 2" TO 12" - JAW LENGTHS RANGE FROM 4" TO 16". USA.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
90° ANGLE CLAMP IDEAL FOR FRAMING AND CABINET ASSEMBLY
|
| 90 Degree Angle Clamp
|
THE DURABLE "PONY®" MODEL 9180 90° ANGLE CLAMP SECURELY HOLDS MITER, BUTT AND T-JOINTS FOR GLUE UP OR FASTENING:
2-1/2" MITER OR BUTT JOINT CAPACITY - 1-1/8" T-JOINT CAPACITY. NON-MARRING PLASTIC COATED DIE CAST JAWS - REAR JAW SWIVELS FOR EASY ADJUSTMENT ON DIFFERENT MATERIAL THICKNESS. LARGE HANDLE WITH 4-1/2" STEEL SCREW AND ACME THREAD FOR STRENGTH. IMPORTED.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
RAPIDLY CLAMP MITER OR BUTT JOINTS
|
| Rapid Acting Miter Clamp
|
WITH THE "PONY®" MODEL 9170 RAPID ACTING MITER CLAMP, YOU CAN FIRMLY HOLD MITER OR BUTT JOINTS, LEAVING THE JOINT FULLY EXPOSED FOR DOWELLING, GLUING OR NAILING:
2-3/4"W X 1"H JAWS HAVE QUICK RELEASE FEATURE FOR EASY ADJUSTMENT - DIE CAST FRAME FOR STRENGTH. WILL HOLD MATERIAL UP TO 2-3/4" WIDE. ADJUSTING HANDLES HAVE ACME THREADS. IMPORTED.
|
|
|
|
Clamps And Vises - Specialty Clamps
|
QUICK RELEASE Jorgenson Hold Down Clamp DESIGNED FOR WORKBENCHES
|
| Jorgenson Hold Down Clamp F/workbench
|
SIMPLY PLACE THE GLASS FILLED NYLON "JORGENSEN®" Jorgenson Hold Down Clamp INTO A 3/4" HOLE, TIGHTEN INTO PLACE AND GET TREMENDOUS VERSATILITY FOR YOUR WORKBENCH:
QUICK-LOCK LEVER, RELEASES AND MOVES EASILY. 4-1/2" HOLD DOWN CAPACITY, LESS WORKBENCH TOP THICKNESS. SOFT PADS PROTECT WORK SURFACE FROM MARRING. 50 LB. LOAD LIMIT. IMPORTED.
|
|
|
|
Clamps And Vises - Bench Vises
|
"JORGENSEN®" AMERICAN MADE BENCH VISES HAVE FEATURES FOUND ONLY ON MORE EXPENSIVE MODELS
|
| 4" X 10" Jorgensen Bench Vise
...plus other(s)
|
THE FINELY MACHINED, RAPID ACTING "JORGENSEN®" BENCH VISE IS FULL OF SOUGHT AFTER FEATURES LIKE QUICK RELEASE, TAPPED HOLES FOR ATTACHING WOODEN JAW FACES, SOLID WOOD HANDLE AND A STEEL DOG. HERE IS A VISE YOU WILL BE PROUD TO OWN. USA.
801-744 - 4" X 10" JAW W/12" OPENING; 36 LBS. 801-745 - 4" X 7" JAW W/9" OPENING; 30 LBS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
96-190 - 12" X 12" PSA RUBBER CLAMP PAD:
CUT TO FIT, 1,000 LB. TENSILE STRENGTH, 0.125" THICK BLACK NEOPRENE. APPLIES DIRECTLY TO VISE BODY AND JAW OR OPTIONAL WOODEN FACES USING 60 LB. PRESSURE SENSITIVE ADHESIVE (PSA) BACKING. STABLIZES AND PROTECTS WORKPIECES.
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
THE FASTEST AND STRONGEST ONE-HANDED CLAMP IS TWO CLAMPS IN ONE
|
| 22" E-z Hold Ii Bar Clamp
...plus other(s)
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
"JORGENSEN®" LIGHT DUTY STEEL BAR CLAMPS FAVORED BY CABINET MAKERS AND WOODWORKERS
|
| 2-1/2" X 6" Std Bar Clamp
...plus other(s)
|
THE MULTIPLE DISC CLUTCH ON "JORGENSEN®" STEEL BAR CLAMPS ENSURES SECURE HOLDING FORCE AND EASY RELEASE:
2-1/2" REACH; 1/4" X 3/4" HIGH CARBON STEEL RUST RESISTANT BAR; 600 LBS. LOAD LIMIT. MALLEABLE AND DUCTILE IRON CASTINGS; ORANGE BAKED ENAMEL FINISH. 3/8" DIA. STEEL SCREW WITH U.S.S. THREADS; VARNISHED HARDWARE HANDLE. 828-586 - OPTIONAL CLAMP PADS PROTECT WORKPIECE AND KEEP GLUE FROM STICKING. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
109-823 - BEAR PAW™ CLAMP PADS - CLICK HERE.
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
"JORGENSEN"® STEEL I-BEAM BAR CLAMPS PROVIDE AWESOME STRENGTH
|
| 3' I-beam Bar Clamp
...plus other(s)
|
SUPER TOUGH, "JORGENSEN®" STYLE 7200 STEEL I-BEAM BAR CLAMPS HAVE A MASSIVE 7,000 LBS. LOAD LIMIT. DESIGNED FOR RIGOROUS DAILY DEMANDS AT SCHOOL SHOPS, COMMERCIAL WOODWORKING OPERATIONS, METALWORKING, WELDING AND MANY MORE APPLICATIONS:
2"H X 1-3/4"W CLAMP FACE. CRANK HANDLE. MALLEABLE AND/OR DUCTILE IRON CASTINGS - 5/8" COLD DRAWN STEEL SCREW WITH SMOOTHLY CUT ACME THREADS. 1-1/2" X 7/16" ROLLED, HIGH CARBON STEEL BAR.
895-768 - MODEL 7224, 24" OPENING. 125-027 - MODEL 7236, 36" OPENING. 125-028 - MODEL 7248, 48" OPENING. 895-775 - MODEL 7260, 60" OPENING. 943-300 - MODEL 7272, 72" OPENING. R10022 - MODEL 7296, 96" OPENING.
125-032 - OPTIONAL SET OF FOUR SOFT, DURABLE, PLASTIC PADS PROVIDES A RESILIENT, PROTECTIVE CUSHION WHEN CLAMPING WOOD, METAL AND PLASTIC SURFACES: CAN BE ADJUSTED AND REMOVED, QUICKLY, IF DESIRED. USA.
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
E-Z HOLD STEEL BAR CLAMPS WORK WITH ONE HAND
|
| 30" Ez-hold
...plus other(s)
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
"JORGENSEN®" ALUMINUM BAR CLAMPS ARE LIGHT BUT STRONG
|
| 24" Aluminum Bar Clamp
...plus other(s)
|
PERFECT FOR COMMERCIAL OR DO IT YOURSELF APPLICATIONS, "JORGENSEN®" ALUMINUM BAR CLAMPS FEATURE A 1/2" DIA. SCREW WITH DEEP ACME THREADS FOR POSITIVE PERFORMANCE:
1-5/16" X 13/16" EXTRUDED, ANODIZED ALUMINUM BARS. 1-5/8" SQUARE CLAMPING FACES. MALLEABLE AND DUCTILE IRON CASTINGS; ORANGE BAKED ENAMEL FINISH; 1,600 LBS. NORMAL LOAD LIMIT. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
109-823 - BEAR PAW™ CLAMP PADS - CLICK HERE.
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
JORGENSEN® ISDTM 3 EXPANDABLE ONE-HANDED BAR CLAMPS/SPREADERS ALLOWS TWO CLAMPS TO JOIN FOR LONGER CLAMPING LENGTH
|
| 6" Isd-3 Bar Clamp
...plus other(s)
|
JORGENSEN®ISD-3® ONE-HANDED BAR CLAMPS/SPREADERS FEATURE FAST, DURABLE, SPRING LOADED MECHANISM FOR ONE-HANDED CLAMPING ACTION. THE QUICK RELEASE KNOB RELEASES THE STATIONARY HEAD SO IT CAN BE REVERSED EASILY FOR SPREADING APPLICATIONS. THE PATENTED HEAD DESIGN ALLOWS ANY TWO JORGENSEN ISD-3 BAR CLAMPS TO BE JOINED TOGETHER FOR GREATER CLAMPING CAPACITY. EXAMPLE: TWO 12-INCH BAR CLAMPS JOINED TOGETHER WILL GIVE YOU ONE CLAMP WITH A 30-INCH CAPACITY. WITH EVERY TWO CLAMPS YOU BUY, IT'S LIKE GETTING A THIRD, LARGER CLAMP FOR FREE. FEATURES ALSO INCLUDE:
76% MORE CLAMPING FORCE THAN OUR COMPETITION DUAL DUROMETER HANDLES FOR A COMFORTABLE GRIP SQUEEZE THE PISTOL GRIP TO CLOSE; PULL THE TRIGGER TO RELEASE HEAT-TREATED STEEL BAR RESISTS FLEXING UNDER LOAD BODY IS HIGH-TECH LIGHTWEIGHT RESIN SOFT JAW PADS PROTECT FINISHED OR DELICATE MATERIALS ONE YEAR MANUFACTURER'S WARRANTY IMPORTED
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
REVOLUTIONARY DESIGNS GIVE YOU SERIOUS, ONE HANDED CLAMPING FORCE
|
| Jorg 6" Isd Bar/spreader Clamp
...plus other(s)
|
CONVENIENCE WITHOUT SERIOUS CLAMPING POWER THAT HAS ALWAYS BEEN THE TRADEOFF WITH ONE HANDED CLAMPS. ALL OF THAT HAS CHANGED WITH THE "JORGENSEN"® BAR/SPREADER CLAMP AND THE SPRING LOADED "PONY®" HAND CLAMP, WHICH OFFER QUICK, EASY, ONE HANDED CLAMPING PLUS THE PRESSURE YOU COULDNT APPLY BEFORE:
DURABLE COMPOSITE COMPONENTS FOR LONGER LIFE. HANDLES DESIGNED FOR COMFORT - NON-MARRING JAWS TO PROTECT YOUR WORK. OUR 6" CLAMP SET INCLUDES (2) 6" ONE HANDED BAR CLAMPS PLUS A 25' JORGENSON TAPE MEASURE
|
|
|
|
Clamps And Vises - Bar & Pipe Clamps
|
RAPID ACTION, SECURE HOLDING PIPE CLAMP FIXTURES
|
| #52 Lt Dty Pipe Clamp Fx
...plus other(s)
|
THE FAMOUS "PONY®" #50 PIPE CLAMP FIXTURE ATTACHES TO ANY LENGTH OF 3/4" DIA. THREADED BLACK PIPE:
TAIL STOP HAS A MULTIPLE DISC CLUTCH THAT GRIPS THE PIPE AT ANY POINT BUT RELEASES, EASILY. 5/8" COLD DRAWN STEEL SCREW - 1-3/4" SQUARE CLAMP FACE. LOAD LIMITS - REGULAR PIPE 2,800 LBS., EXTRA HEAVY PIPE 3,800 LBS. (PIPE NOT INCLUDED). 125-025 - #52 FIXTURE HAS SIMILAR FEATURES BUT IS DESIGNED FOR 1/2" DIA. PIPE. 125-032 - PROTECT YOUR WORKPIECE WITH CLAMP PADS SPECIALLY DESIGNED FOR "PONY®" CLAMPS. SOLD IN SETS OF FOUR, THEY PROVIDE A PROTECTIVE CUSHION WITHOUT MARRING, STAINING, STICKING OR SLIPPING. 821-721 - ALSO SOLD IN SETS OF FOUR, CLAMP SADDLES HELP HOLD PIPE CLAMPS IN POSITION. USA.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
